Related
What is the best solution for quick charging the Galaxy Nexus in an automobile?
I have started to use 12-220 volt converter so I can use wall chargers.
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
ellisz said:
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
Click to expand...
Click to collapse
+1 .. this solution has been working great for me, as well.
I've been getting 2.1A car chargers (look for ones for the iPad), most of the ones I had prior to this were 700mA or so and they can't keep up with my 1A phones. Be careful of dual port chargers advertising 2A, they may only be 1A each and may be "optimistic" about that rating. And don't worry about getting one rated for too much current, the Galaxy Nexus won't pull more than an amp no matter what the charger rating.
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
I've never run into a car adapter that looks like a USB port, including the VZW charger with a spare port or the cheap 2.1A chargers I got from Amazon. My guess is that a charger not built correctly and leaving the data pins open only supports ~500mA anyway. Even if that's not the case I have a moral objection toward buying a cable to fix a design flaw in another cheap product - but that's just me
Grant H said:
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
Click to expand...
Click to collapse
I've got a charger similar to http://www.ebay.com.au/itm/USB-Car-...ccessories&hash=item4ab18358f4#ht_1638wt_1392
All I had to do was undo the screws at the top, put a bit of solder between the middle usb pins, and my phone recognises it as a AC source rather than USB.
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Grant H said:
What is the best solution for quick charging the Galaxy Nexus in an automobile?
Click to expand...
Click to collapse
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
I've heard that Motorola one mentioned a lot as a good one.
The nice thing about having the low-profile usb plug is (a) it is low profile, (b) I can use it to charge other devices. The charge-only cable is only about $4, so I had no issues buying it to work with this to charge as an AC charge over a USB charge.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
I have this one and it charges just like it does from the home outlet and its says "AC" charging. I bought another 8 for family and friends and they all love it.
I think I've figured out the disconnect, I've run into chargers that appear as a USB host which limits the charging to 500mA on previous phones I've had.
You guys are concerned about USB vs. AC charging mode. Of the chargers I've got, this one lists as AC while the rest as USB. However, the fact that the other chargers all work just fine keeping up with GPS+streaming music indicates that the USB vs. AC really has no bearing on the charge current delivered. I'd stay away from charge-only cables just because they'll get mixed in with your standard USB cables and you'll knock yourself out wondering why they don't work. On the other hand, if you really want AC in your battery info order the one I linked.
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
jdbower said:
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
Click to expand...
Click to collapse
makes sense.. the one I use has dual usb (1.0 and 2.1)
You went and gave me a project for the weekend, and once again science prevails over anecdotal evidence. I took each of my 5 chargers and hooked them up to a 12V power supply that measures current. I then recorded whether the charger reported AC or USB, for the ones with USB I modified a right-angle adapter to short out the data pins, and I measured the current. The contenders:
Verizon Wireless Dual Charger
XTG Dual Port Charger
Griffen Powerjolt Dual USB Charger
Griffen Portjolt Micro
CostMad Dual USB Charger
The VZW model was USB out the external port as I had tested before, however AC out the built-in cable which I hadn't bothered to test. It pulled 0.25A @12V via the USB port and 0.59A via the cable. Hmmm... A hole develops in my previous observation. While I had used this on a long car trip with no issues, it was via the built-in cable.
The XTG was new, I hadn't used it before as it's in the car I rarely drive. It reported USB and 0.22A. With the adapter to make it report AC it pulled 0.48A.
The pattern was set. I had expected the Griffen adapters to be built more appropriately but the dual charger reported 0.22A without the adapter and 0.42A with. I had used this without losing charge in the past so this was surprising to me, but it's possible I just wasn't drawing as much current because the screen was dimmer or something.
The compact Griffen adapter (which is great for a laptop bag, BTW) pulled 0.21A and 0.47A respectively.
The cheap CostMad adapter was the only one that performed well out of the box, both reporting AC and pulled 0.57A.
In theory, a perfect adapter should pull 0.42A. Anything more is waste, anything less means it's not keeping up. I have doubts about the Griffen 2x allowing for a full amp, but the VZW and CostMad chargers are pretty lossy. What's even worse is that I'm pretty sure the VZW charger is rated for 800mA (but I can't find an actual spec on it) which would mean that it pulled the most power for the least current. Not that this really matters unless you've got an electric car.
Sorry for misleading you earlier, I should have checked the other port of the known-good VZW charger and probably doublechecked the numbers on my other "known good" charger. Still hating cables that work for charging but not for data, I ended up modifying each of the chargers to short the middle pins (except for the VZW one). If I didn't have the soldering iron for this, I probably would have gone for some of these instead.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
CyberPunk7t9 said:
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Click to expand...
Click to collapse
I'm using the same one and it works perfect. Charges even when GPS navigation is running.
Make sure you select Amazon as the seller though. I heard there are a lot of fake ones.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
+1 to those recommending this one. I have this exact model and it does indeed charge at the "AC" rate, about twice as fast as the "USB" rate.
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
The Motorola one will charge even when using GPS. I have a friend I bought one for that uses his GPS all day and loves the Motorola charger.
I have a QC 2.0 charger that worked fine with my Note 4 (2A) and Note 3 (only 1A), but doesn't charge my axon. It seems to be a protocol negotiation issue. Right when you plug it in, it says 1.5A, 1A, etc.. then after 30 seconds or so, it goes to discharging.
Has anyone tried their phones with other QC chargers (not the stock one that comes with the phone)?
The Axon 7 is QC 3.0, so maybe that's the issue?
My old non-QC charger work just fine with my Axon 7 (though of course they're not as fast).
I also have a quick charge 2.0 charger that doesn't work with my USB type c cables. However when I use a micro USB cable with an adapter it works fine so maybe give that a try.
Anyone recommend any QC 3.0 chargers? I would like an extra one for travelling and maybe one for the car.
imp3r10 said:
Anyone recommend any QC 3.0 chargers? I would like an extra one for travelling and maybe one for the car.
Click to expand...
Click to collapse
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.
vizzze said:
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.
Click to expand...
Click to collapse
What cable do you use?
imp3r10 said:
What cable do you use?
Click to expand...
Click to collapse
tried with the ZTE cable coming with the phone, but just received a spare USB3->USB-C always from Aukey to use in the car.
ZTE cable working fine, i still have to try the Aukey cable though (https://www.amazon.it/gp/product/B0196GHUEM)
vizzze said:
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.
Click to expand...
Click to collapse
I have this car charger as well, along with this usb C cable, at least according to Amazon, but it looks nothing like this, maybe it got updated.
https://www.amazon.com/gp/product/B013RMG6SM
thjoca3 said:
I have this car charger as well, along with this usb C cable, at least according to Amazon, but it looks nothing like this, maybe it got updated.
https://www.amazon.com/gp/product/B013RMG6SM
Click to expand...
Click to collapse
This cable doesn't *advertise* using a 56k resistor. I'd stay away from it unless clarified.
Does this one seem OK?
https://amazon.com/gp/product/B0146FK3G0/ref=crt_ewc_title_srh_1?ie=UTF8&psc=1&smid=A19QP33IVZMM7A
emtownsend said:
Does this one seem OK?
https://amazon.com/gp/product/B0146FK3G0/ref=crt_ewc_title_srh_1?ie=UTF8&psc=1&smid=A19QP33IVZMM7A
Click to expand...
Click to collapse
It seems to be working just fine. However, the built-in cable might seem like a bonus but it's not such a good idea... It will be the first part to break (as always with attached cables) and you charger will loose its value.
I'D consider this instead. Same price but you need an USB type C cord (this pack is awesome). I own both these articles and i don't regret buying them one second .
Sorry, I can't post links since I'm a new XDA user...
I've bought on Aliexpress a Choetech wall charger (ASIN B01D9QZV28) and a Choetech car charger (ASIN B01582ELMC).
They work great with the supplied ZTE USB-C cable and a Choetech USB-C Cable.
djona12 said:
It seems to be working just fine. However, the built-in cable might seem like a bonus but it's not such a good idea... It will be the first part to break (as always with attached cables) and you charger will loose its value.
I'D consider this instead. Same price but you need an USB type C cord (this pack is awesome). I own both these articles and i don't regret buying them one second .
Click to expand...
Click to collapse
thib_dem said:
Sorry, I can't post links since I'm a new XDA user...
I've bought on Aliexpress a Choetech wall charger (ASIN B01D9QZV28) and a Choetech car charger (ASIN B01582ELMC).
They work great with the supplied ZTE USB-C cable and a Choetech USB-C Cable.
Click to expand...
Click to collapse
Thank you for the suggestions. You know, it just occurred to me that my car (2016 Mazda CX-5) lacks a 12v "cigarette" style outlet up front. I have two always on dedicated USB charging ports in my arm-rest. Those ports are not quick charge ports though. I have two other USB ports up front where the 12v socket is usually located and these are standard USB for the infotainment setup. Hum.... The phone will charge OK on a standard USB to C cord right that lacks QC 3? Bummer. Was thinking I could get QC in the car but not likely! I will need the suggested cables either way though.
I may have a 12v in the armrest too, but same deal - I'll need longer cords.
emtownsend said:
Thank you for the suggestions. You know, it just occurred to me that my car (2016 Mazda CX-5) lacks a 12v "cigarette" style outlet up front. I have two always on dedicated USB charging ports in my arm-rest. Those ports are not quick charge ports though. I have two other USB ports up front where the 12v socket is usually located and these are standard USB for the infotainment setup. Hum.... The phone will charge OK on a standard USB to C cord right that lacks QC 3? Bummer. Was thinking I could get QC in the car but not likely! I will need the suggested cables either way though.
I may have a 12v in the armrest too, but same deal - I'll need longer cords.
Click to expand...
Click to collapse
If it's standard USB A ports, the phone will charge at a normal rate, just not at QC rate.
That's what i like about those cables. 1 is really short (~30cm/1ft) one is very long (~2m/6ft) and the rest are a standart length (~1m/3ft). They all provide USB 3.0 and QC 3.0 support.
Ordered! Thanks again.
Sent from my VS990 using Tapatalk
At home, I use the quick charger and the USB cable that came with the phone as well as a Insignia 10 ft. USB-C to USB 2.0 cable with Insignia USB AC adapter.
In my car and on the go I use a Platinum QC 2.0 car adapter (http://www.bestbuy.com/site/platinum-quick-charge-car-charger-black/1638009.p) and AC adapter (http://www.bestbuy.com/site/platinum-quick-charge-wall-charger-black/1637019.p) with VCE cables (https://www.amazon.com/VCE-3-3FT-6-6FT-OnePlus-950-3PACK/dp/B01J0VVKEY). The cables are Benson-approved and USB 3.0 for a really good price.
I keep my old Samsung quick charge brick (from my Note 4) and a USB type-c cable from my OnePlus 2 in my bag for when I'm out and they work just fine for quick charging. Not as fast as the ZTE cable/brick combo, but pretty close.
Do you have any recommendation for car charger (cigarette lighter plug)?
One with fast charger feature which is compatible with Google Pixel 2 (USB-C PD?).
For my old Nexus 6, I must use car charger with Qualcomm Quick Charge 2.0, because otherwise the Nexus 6 will still loosing power when using car navigation software. Standard car charger cannot keep up with the battery drain.
Thanks.
I came from a Nexus 6 too. I ended up buying micro USB to usb-c mini adapters which just go on the end of my old USB leads. I threw one on the car charger and it works fine. It's a stop Gap measure, and I mainly got it for an ihome Android charger/radio, but ended up wrapping duct tape around a usb-c charger cable and putting it in the radio dock.
https://smile.amazon.com/gp/aw/ya/r...reorder_params=B01J3GG82U,112-8020237-8121850
Sent from my Pixel 2 using Tapatalk
I use the Aukey QC 3.0 car charger with dual 3.0 USB ports. It does not register as rapid charging but it is very quick. I used it with Moto Z Droid and used Google navigation while charging and it charges quick and does not lose charge. I also use the Aukey 3.0 wall charger and that does register as rapid charging.
I just bought a Deltaco (a Scandinavian brand) 3A/5V 15W car charger for 6,5 USD. Can't feel much difference compared to the original home charger's 18W using a 2. Gen Goobay 60W USB C-C cable.
Phone registers the input as rapid charging.
Ampere registers 2.7A with the screen on. Same as the standard charger, so I didn't find any reason why it should be worse
Sendt fra min Pixel 2 med Tapatalk
I bought the Nekteck 5.4 amp charger https://www.amazon.com/gp/product/B01CH9NEM2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1. The curly cord is hard wired and side mounted with a USB C plug on the end, it charges my Pixel 2 fast (charging rapidly). I had issues with other chargers and cables that wouldn't charge my Pixel 2 at full speed, this one works great. Also, it has a USB A port on the top so you can rapidly charge two devices at the same time.
The Verizon branded one works really great. Charges very fast.
Any update on these?
I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.
I use the tronsmart car charger.. It charges the phone rapidly.. Made a short video on it:
I have a Verizon USB C (purchased from Amazon for $17) and it works great. It fits very tight and shows up as fast charging.
https://www.amazon.com/dp/B0711FG2TB/ref=cm_sw_r_cp_apap_sLsxpduAP1r1H
PuffDaddy_d said:
I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.
Click to expand...
Click to collapse
Well, I waited too long and it is out of stock, but it looks like I may have avoided a bad purchase according to this supposed Google Engineer's review:
https://www.amazon.com/gp/aw/review/B01LGO9LE4/R3J0UNYEXFSH0X/ref=cm_cr_dp_mb_rvw_1?ie=UTF8&cursor=1
Any other power delivery compatible options?
I think the hard wired C cabled chargers are the safest bet because of all the dicey 3rd party C cables out there.
I just got the $10 Monoprice USB C charger with PD (9v 3A) because it is rated to charge the at least as fast as the in-box wall charger. Not shilling for Monoprice, just seemed like a better deal than all the sketchy chargers on Amazon with fake reviews, none of which offered anything but 5v 3A or worse at under $25. I figure it's trustworthy because they say it's certified and Benson tested their cables and said they were OK. So far it has not tried to burn my car down or nuke my phone. I'm using it with the 0.5m Monoprice cable, it was about $17 with tax for the bundle. I can't post links, search 24424 on Monoprice.
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.
Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (...)
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
PuffDaddy_d said:
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.
Click to expand...
Click to collapse
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?
fishlifters said:
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?
Click to expand...
Click to collapse
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved https://www.amazon.com/dp/B07115BLPP/ref=cm_sw_r_cp_apa_bSiBAb2H2P7W0
PuffDaddy_d said:
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved
Click to expand...
Click to collapse
A USB C charger 5v 3W standard will still charge faster than a USB A QC charger, but it's only $3 less on Monoprice for the non-PD one. I don't see anything on usb DOT org listing GearMo on the certified power brick chart. I wouldn't risk it. There's no reason to put a USB 3.0 A-type port on a charger, seems fishy to me.
This one looks promising as well:
https://www.amazon.com/dp/B07234DKQ5/ref=cm_sw_r_cp_awdb_t1_D0lIAb2M0BDZG
Sent from my LG-H932 using Tapatalk
I'm using this Meagoes charger from Amazon. Works well.
https://www.amazon.com/gp/product/B076H7X8QN
Hi.
Two questions:
1. Where should I look for one?
Found this on Ali-express but wanted your opinion:
http://bit.ly/2ze7U2U
2. Regarding the cable: are all cables the same? Or is this (in link - the one that comes with the OPO) different (can move more current)?
Trying to save where I can
Thank you!
benyben123 said:
Hi.
Two questions:
1. Where should I look for one?
Found this on Ali-express but wanted your opinion:
http://bit.ly/2ze7U2U
2. Regarding the cable: are all cables the same? Or is this (in link - the one that comes with the OPO) different (can move more current)?
Trying to save where I can
Thank you!
Click to expand...
Click to collapse
I recommend using original charger and cable.
https://m.ebay.com/itm/Original-OEM...%3A6a5fb7c815f0aca4b4ac59a8fffbc199%7Ciid%3A6
Mr.Ak said:
I recommend using original charger and cable.
https://m.ebay.com/itm/Original-OEM...%3A6a5fb7c815f0aca4b4ac59a8fffbc199%7Ciid%3A6
Click to expand...
Click to collapse
Thank you so much for this.
Are you the only one answering questions?
Thanks!
Truth be told you can use any charger or cable on opo as long as the cable support fast charge...i have been using Nokia charger, Xiaomi charger, apple charger and samsung charger combine with original opo cable, xiaomi cable, remax cable and samsung cable and none of them give any problem on my opo...
iPusak Gaoq™ said:
Truth be told you can use any charger or cable on opo as long as the cable support fast charge...i have been using Nokia charger, Xiaomi charger, apple charger and samsung charger combine with original opo cable, xiaomi cable, remax cable and samsung cable and none of them give any problem on my opo...
Click to expand...
Click to collapse
Thank you for this.
I have been using a 5V 2.1A charger (from Belkin) but with a "regular" old Samsung micro-usb cable and it took 6 hours to charge till full.
I can't imagine it's right.
Perhaps a new, more powerful cable?
Also, how long should it take to fully charge the One?
Thank you!!! :good:
benyben123 said:
Thank you for this.
I have been using a 5V 2.1A charger (from Belkin) but with a "regular" old Samsung micro-usb cable and it took 6 hours to charge till full.
I can't imagine it's right.
Perhaps a new, more powerful cable?
Also, how long should it take to fully charge the One?
Thank you!!! :good:
Click to expand...
Click to collapse
if you use cable that support fast charge you can charge your phone less then 2 hour...just get a cable that support fast charge or support quick charge 2.0 and you will see the difference....
getting a good cable makes all the difference. I'm not sure if it is due to Lineage, firmware or the kernel... but my OPO has been very picky with the charging cable for at least the last 9 months. I first noticed this when my Jaybird Bluebuds X flat short cable charged significantly faster (then i lost the cable). then on some cables, it would say it's charging but the percentage would remain constant or even drop at a slower rate! I then tried different cables and charger combinations using the the AccuBattery app and OPO Charging Current app to note the ampere.
the xiaomi fast charging micro usb 1.2m flat cable is cheap and charges "fast". I highly recommend the xiaomi cable (i even bought like 4 of them for the office and for home).
paired with new-ish samsung quick charge chargers (which came with the S7 and C5 Pro that i had lying around), i get about 1.58A (screen off).... i also get comparable results with an old Samsung Galaxy Tab 10.1 charger from like 2011 and an ipad 3 charger.
-SKYLINE- said:
getting a good cable makes all the difference. I'm not sure if it is due to Lineage, firmware or the kernel... but my OPO has been very picky with the charging cable for at least the last 9 months. I first noticed this when my Jaybird Bluebuds X flat short cable charged significantly faster (then i lost the cable). then on some cables, it would say it's charging but the percentage would remain constant or even drop at a slower rate! I then tried different cables and charger combinations using the the AccuBattery app and OPO Charging Current app to note the ampere.
the xiaomi fast charging micro usb 1.2m flat cable is cheap and charges "fast". I highly recommend the xiaomi cable (i even bought like 4 of them for the office and for home).
paired with new-ish samsung quick charge chargers (which came with the S7 and C5 Pro that i had lying around), i get about 1.58A (screen off).... i also get comparable results with an old Samsung Galaxy Tab 10.1 charger from like 2011 and an ipad 3 charger.
Click to expand...
Click to collapse
Thank you all for the great information!!!
Are you guys approve of this cable:
https://www.aliexpress.com/item/Mic...lgo_pvid=66a80ce9-a9b2-454e-baa8-44c3ccb87354
well I went with blitzwolf ...I don't use my original charger as blitzwolf is faster(just a tad but still) ...BW-S5 is my main and I've ordered an BW-S9(I'll make BW-S5 a second to charge my phone in my shop and also charge clients phones/tablets if needed - I fix them too)
BW-S5 has an extended review from a dude with all the pros and cons ...great review if you want to look at it(he'll do the S9 as well but didn't receive it yet and I couldn't wait, I needed a good 2nd one)
P.S. Using custom cable made by me to avoid getting slow charges(only power cable, no data - for safety too)
I'm on this charger: http://s.aliexpress.com/qeaIfIrE and reversible micro USB cable from the same manufacturer (reversible micro usb seems to be not available to buy any longer though, I can see regular micro usb only)
Both are excellent.
Reccomend a Anker Charger
Anker makes good chargers..
evronetwork said:
P.S. Using custom cable made by me to avoid getting slow charges(only power cable, no data - for safety too)
Click to expand...
Click to collapse
Can we hear more about your custom cable?
Chotech SMT0008 5V/2.4A charger
Hi anybody who want to use a longer cable (1.8m -3m) without losing the charging speed, I would recommend Chotech SMT0008 5V/2.4A charger. You would be able to increase the charging speed up to 10-15%.
https://www.aliexpress.com/item/CHO...er-for-iPhone-Samsung-Xiaomi/32742790687.html
This charger can supply up to 5.5V to compensate USB cable resistance (especially when using a longer cable).
https://lygte-info.dk/review/USBpower Choetech usb 5V 2.4A SMT0008 UK.html
Don't forget a good quality cable as well for fast charging. Up to 1.5m 22AWG is OK, but over 1.5m get a 20-21 AWG cable. If you want to learn about cable resistance during charging the below article is helpful.
https://goughlui.com/2014/10/01/usb-cable-resistance-why-your-phonetablet-might-be-charging-slow/
I myself use Chotech SMT0008 5V/2.4A with a Tronsmart 20AWG 1.8m cable. I have tested some cables: Mageek 21AWG 3m, Blitzwolf 21AWG 1.8m, Ugreen 22AWG 1.5m all of them are OK. Avoid VoxLink cables !! their "fast cable" uses fake 24-28AWG!
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
nicz0906 said:
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
Click to expand...
Click to collapse
Just replace the charger. It's a lot cheaper than the phone.
I've had good results with the Anker Nano series.
I'd expect this to be the charger anyway and not from the phone with it.
I use the A53 with my old Samsung 15 watt fast charger and the cable that charger came with just fine. There's no problem. The a54 should be no different.
So, I expect the charger to have a problem.
nicz0906 said:
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
Click to expand...
Click to collapse
This must be an issue with the charging brick, get the Anker C-Type Charger. Its the best in the game!
slytherin_eeper said:
This must be an issue with the charging brick, get the Anker C-Type Charger. Its the best in the game!
Click to expand...
Click to collapse
I got the Samsung Charger brick with the phone but I use the Anker Charger anyways! Ive had this for more than a year and I use this as my primary charging brick. Never faced any issue so far.
I was using my old Oneplus Warp charger (65W) and was also getting heating, and phone would only charge for like 10 mins before stopping.
Bought a Belkin 25W USB-C brick and all my issues went away