Hello,
I Have me News Mi Mix 2 Bricked by Flash, in me PC is the Phone: Qualcomm HS-USB QDLoader 9008
Can i Flash the Firmware from China Rom without Bootloader/Recovery (Only Black Screen on Mobile Phone)
fabian_screta said:
Hello,
I Have me News Mi Mix 2 Bricked by Flash, in me PC is the Phone: Qualcomm HS-USB QDLoader 9008
Can i Flash the Firmware from China Rom without Bootloader/Recovery (Only Black Screen on Mobile Phone)
Click to expand...
Click to collapse
1.Just Download the Official Firmware from the MIUI website. (Fastboot rom)
2.Download Miflash Beta. (Beta worked for me)
3.When you connect the Mi Mix 2 with your system, if the device manager recognises your mobile and if it is displayed as Qualcomm HS-USB QDLoader 9008, then it means that your Mobile is in EDL Mode.
4. Now extract the fastboot rom.(If you find a single File in that extract, then rename and add an extension ".tgz". Now Extract it Again. You will find some files.
5. Open Mi Flash and press Refresh after connecting the mobile.
6. Press select and open the extracted files' folder.
7.Flash.
Done.
ArunGMR said:
1.Just Download the Official Firmware from the MIUI website. (Fastboot rom)
2.Download Miflash Beta. (Beta worked for me)
3.When you connect the Mi Mix 2 with your system, if the device manager recognises your mobile and if it is displayed as Qualcomm HS-USB QDLoader 9008, then it means that your Mobile is in EDL Mode.
4. Now extract the fastboot rom.(If you find a single File in that extract, then rename and add an extension ".tgz". Now Extract it Again. You will find some files.
5. Open Mi Flash and press Refresh after connecting the mobile.
6. Press select and open the extracted files' folder.
7.Flash.
Done.
Click to expand...
Click to collapse
Hi ArunGMR, i have a Poco M3 and when connecting it to the PC, it is shown as Qualcomm HS-USB QDLoader 9008. But in Mi Flash, the device is not visible, even when i refresh for several times.
Related
RM-1030 :ROM V2 to write the V1 machine is wrong，but before I did not know!
1. Now can only be connected to Qualcomm HS-USB QDLoader 9008 （Port COM and LPT ：COM10），insert computer USB case;
2. The machine could not be started in any case（Power + “volume +/-”or other，no vibration, screen all black）;
3. Seemingly currently only through the "Software Download eMMC" to write the underlying file;
4. Who has the required files as shown in the picture（need to be associated with the hex and MBN files）?
image： pfile.cn*/*h716a1 （del *）
Of course, if you have a better way, I hope you can share it, thank you very much!
I have TOT files, I have BoardDiag (different versions), but when I follow the countless instructions online I always get "Device was not found in dload trying flash programmer.".
Where do I go from here?
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...???
Check ure ports in d3vice manager
bravo2526 said:
Bro how are conecting your phone ..
If it is like ...
1: you installed the drivees for qualcome qhs bulk ..
2: device when conected now show under device manager as Qualcomm HS-USB QDLoader 9008
3:if above two are effermative tell me !! If not thwn again tell me...������
Click to expand...
Click to collapse
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Quza said:
This is correct. I reinstalled the qualcomm driver, now it is COM3 and boarddiag from here works (http://open-freax.fr/guide-unbrick-your-lg-g3/), but emmc test fails.
"Failed to open partition from EMMC." It doesn't matter if I select Read/Write or Erase.
By the way, I didn't have to open my phone for the 9008 mode, it went there kind of on its own.
Click to expand...
Click to collapse
Bad news if emmc fails ..i supose its a hardware damage to your emmc chip ...
What was you trying when it happend ..?
Power outage during rom installation ??
During KDC flash it stopped working. After 15 minutes at 0% I restarted the phone.
hi, my phone hardbricked and i have only Qualcomm HS-USB QDloader 9008(Com 3) on device manager.
i will try with qfil method, but unable to find required files
is there a way to unbrick it?
and need this files.
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
cescer4 said:
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
Click to expand...
Click to collapse
Please Help Me
Yesterday my phone got bricked. It does not respond to the power button at all. Connecting it to a Windows PC yielded a QUSB_BULK_CID:xxxx_SN:xxxxxxxx, which turns into a Qualcomm HS-USB QDLoader 9008 after installing the driver. I tried following this post, but the firmware does not contain the programmer file (prog_emmc_firehose_8909.mbn originally) that the thread mentions. I'll try messaging Motorola, but I don't know if anything will come out of it.
Support was, as expected, less than worthless. I was told to send the device for a warranty repair, complete with a full data wipe.
adamski234 said:
Yesterday my phone got bricked. It does not respond to the power button at all. Connecting it to a Windows PC yielded a QUSB_BULK_CID:xxxx_SN:xxxxxxxx, which turns into a Qualcomm HS-USB QDLoader 9008 after installing the driver. I tried following this post, but the firmware does not contain the programmer file (prog_emmc_firehose_8909.mbn originally) that the thread mentions. I'll try messaging Motorola, but I don't know if anything will come out of it.
Support was, as expected, less than worthless. I was told to send the device for a warranty repair, complete with a full data wipe.
Click to expand...
Click to collapse
blankflash
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
run the file inside the blankflash file with all files in the archive.
then download firmware for the blankflash and flash it manually.