Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.
Have a link for where you got it?
Sent from my iPhone using Tapatalk
zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal
zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address
Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases
You have a spare case to sell me?
rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM
What about sending one up north to Canada, eh?
evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol
eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.
Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.
been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.
Related
Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Capsule series is much better. No top and bottom part is big failure.
Ploone said:
Hi Guys,
Got my hands on the SGP Ultra Thin Air case, a thin snap-on style case that won't add much bulk/weight to your phone and is for those users that like to keep their devices slim. You can watch the full review below:
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
Looks similar to the $3 case from ebay, is sgp just repackaging these cases?
Look poor with finger prints.
All snap on style cases will look similar, cutouts are a little different and the Ultra Thin features a soft touch back.
Sent from my Nexus S using XDA App
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
chiefroastbeef said:
I have the Thin Air case as well, along with the Glas, both are excellent products, thought a bit overpriced.
The Thin Air is a quality case, I am currently in Hong Kong, so I've tried on all the generic cases at the electronic malls as well. The cheap generic ones doesn't fit the best, there is always a creak or slight warp on the sides of the case that compresses as you squeeze the sides, which to me is annoying. The "better" branded ones are on par with the SGP, but the price is also similar to SGP, I rather buy from a well known brand.
I've had two cheap generic ones before I bought the case mate barely there and the SGP Thin Air, both cheap cases broke a few days after when I took the case on and off.
The Thin Air does leave finger prints, but I don't care too much since it is only the back, and it can be wiped away. The most important part for me is a super thin case with minimal protection that doesn't break easily. So far (fingers crossed), SGP has done it.
Click to expand...
Click to collapse
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Ploone said:
Thanks for sharing, I agree with most of what you have to say, however I feel the case itself just isn't for me. SGP however has been releasing some quality products for the GS2 (as expected) - and I'm excited for what they are bringing next.
Click to expand...
Click to collapse
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
chiefroastbeef said:
I agree, this case isn't for most people, since the normal person that wants a case would want more protection than what the Thin Air has to offer, plus like your video mentioned, there is no top and bottom coverage. But out of the cases I have, I like this the most, the black color blends in with the phone.
Thank you for the review videos, you are doing a great job, very clear voice, smooth presentation, no "umms" or "uhhs," or any tongue smacking. Keep it up! It is because of you that I bought the Glas, which I love!
Click to expand...
Click to collapse
Thanks so much I enjoy doing it and I have a lot more content coming up!
Try to get your hands on one of these http://www.ebay.co.uk/itm/SAMSUNG-G...897177?pt=PDA_Accessories&hash=item3f0bae1319 !
I'm awaiting mine, but surely people would be interested.
Sent from my GT-I9100
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
tietherope said:
I was really excited for this case due to it's look and how minimal it is, but after just 3 days I need to stop using it.
The stickers you place along the sides are constantly moving. They slide up and out of the case somehow, so you need to slide them back down, which leaves a trail of sticky residue.
Also, there is one spot on the back my phone just above the battery
cover that is now damaged due to the case rubbing against it. There are scratches and an area where the color has rubbed off.
My phone is in worse condition after a few days in this case than from a week without any case.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
m0rtiis said:
Really? That doesn't bode well at all. Did you check authenticity of the case with the serial number at their site?
Sent from my GT-I9100
Click to expand...
Click to collapse
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
I had the Captivate before this phone using a Body Glove case. While it is the best case I have ever used on a phone, it also scratched up the top and bottom of my phone pretty bad. It's a pretty common thing with the harder cases.
tietherope said:
I did not, but it was bought directly through their site, not a 3rd party.
Don't get me wrong, the case is beautiful and the damaged area is a lot smaller than the damaged area would be if you were to drop it on concrete without this case. I just want to let others know that this happens as others could be even more OCD about their phone condition than I am. SGP knows the inside of this case scratches your phone, that's why they include the stickers. Unfortunately this one spot was missed, either due to oversight, or it is too small of a location to place a sticker.
Click to expand...
Click to collapse
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
m0rtiis said:
I see. I'm awaiting one of these as we type, do you have pictures of the scratches so I can avoid them with stickers?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
tietherope said:
Yeah, definitely. Just give me a little while and I will get you a picture of either the scratches or at least the part of the case causing it. Whichever will show up on camera first.
Click to expand...
Click to collapse
Trouble with the camera?
Sent from my GT-I9100
m0rtiis said:
Trouble with the camera?
Sent from my GT-I9100
Click to expand...
Click to collapse
Nope, just personal emergencies that required me to be out of town for a week. I'll get some pics after work tonight.
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
m0rtiis said:
I received my Ultra Thin Air Infinity White today and I have to say I'm quite disappointed.
The case doesn't fit that well. If I lay the phone on a table and press down on the left or right side the phone sinks deeper into the case. Without pressure the edges of the case are almost even with the screen's surface, it's only if I press down on the phone that the edges rise above the screen.
Is this a flawed specimen or are all the Ultra Thin Air cases like this?
Click to expand...
Click to collapse
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Ploone said:
As I stated in the video, it's not as tight as I'd like it to be. It won't fall off but I feel a gap between. Seems like it's all cases.
Click to expand...
Click to collapse
No reflection on your review, I ordered the case before you published it.
It's a shame though, it looks good but I'm not sure I'll use it much.
Looking for the best case to show off the Moto X, so I'm trying to find the thinnest clear (not frost!) case out there. Not worried about drops, just want basic scratch and scuff protection.
For reference, I have the Diztronic TPU clear case and the Minisuit clear case, but am looking for something more minimalist that will LEAST change the look of a naked X. Has anyone seen such a case?
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
I bought the Griffin Reveal Case. It has the clear back and is pretty thin. It's hard plastic with a softer rubber around the edge. The back scratches fairly easy, but I do not see them unless I take the case off and look for them. I had read this in reviews, but I'll live with it for the $12.50 I paid from their ebay store (price is higher now on ebay, though cheaper than amazon with shipping).
Ebay link
or
Amazon
I originally had a clear diztronic tpu case, which added a lot of bulk IMO. The Reveal case keeps more of the original feel of the phone.
Mayze23 said:
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
Click to expand...
Click to collapse
do the scratches actually "heal"? I'm getting this case tomorrow, I'm undecided if I want to keep it or get another one...
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Mayze23 said:
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Click to expand...
Click to collapse
Same here. Been using it 2-3 weeks and there are zero scratches.
I have found, like others have said, that it is very hard to get off. It's a breeze to get on though.
Are there any truly transparent TPU cases? The Diztronic is frosted
Rocketfish TPU Case from BestBuy
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
I've been using the AirJacket for a while and really like it. As others have said, no visible scratches, good protection, and it doesn't feel particularly slippery to me. Also doesn't add much bulk. I don't like what it does to the feel of the buttons. Where before they were good and "clicky", now it's mushy, hard to press, and doesn't always respond. I've taken to pressing on them horizontally with my thumbnail instead. Could be I've had bad luck with mine, but I have been tempted to try modifying the buttons (scraping away some rubber to thin them out).
Hey guys!
Now I'm waiting for my walnut Moto X and trying to choose between Rocketfish TPU case and Air Jacket by Powersupport. Price doesn't matter on me. Understood from forums that air jacket has some self-healing coatin and dunno abt same issue in Rocketfish case.
What you guys think about it? What case might be your choise?
Thanks beforehand.
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
tgerbracht said:
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
Click to expand...
Click to collapse
Thanks for feedback!)
Already ordered air jacket + non-glair film. Will make photoes upon delivery
I got a LUVVITT from amazon. TPU sides and Polycarbonite clear back.
I like it so far. It does seem to show minor scuff and scratches on the back though.
samarth1 said:
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
Click to expand...
Click to collapse
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
Thank you. The buttons are hard to press as well. I will return it tomorrow. I will probably go naked.
Sent from my Nexus 7 using Tapatalk
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Please do
The rocket fish case looks great, the buttons are a bit stiff and it is relatively expensive from best buy. Still, it's the best truly clear case I've found.
styndall said:
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Click to expand...
Click to collapse
Good luck, but don't be hopeful. I've had clear TPU yellow before. I think it's a chemical reaction from either light exposure or skin oils. I tried everything and it doesn't 'clean' up at all.
World's thinnest $1 case for the HTC One (M7) and GS4
Identical version for only $1 shipped: http://r.ebay.com/yV2cme
Here's the one I bought for $3: http://r.ebay.com/v69C7X
Samsung Galaxy S4 version here: http://r.ebay.com/6ZNESg
hope u like it .......
None of the links work
Try this http://www.ebay.com.sg/itm/Clear-0-..._PDA_Cases&hash=item417308dd12#ht_2826wt_1125
Or search 0.3mm case for m7 in eBay or Amazon
I've been considering this cases but they are a deal breaker for me because the bottom is not completely protected like the top.
Sent from my HTC One using XDA Premium 4 mobile app
Yes the bottom is not completely protected but the there is protection extending to the bottom from the corners
for bulk orders http://www.sunsky-online.com/product/default!view.do?subject.itemNo=S-MEC-8036W
How firmly does it hold the phone. I don't care for open bottom - i used cases only for camera protection. Anyway, this thin case definitely wont absorb any shock.
What would bother me - whether the phone will not slode out during call etc.
Sent from my Nexus 7 using Tapatalk
It's kind of right and firm . No doubt about that . But in another forum a user had stated that it was able to absorb shock and that he has dropped many times
RUUMan said:
Try this http://www.ebay.com.sg/itm/Clear-0-..._PDA_Cases&hash=item417308dd12#ht_2826wt_1125
Or search 0.3mm case for m7 in eBay or Amazon
Click to expand...
Click to collapse
Thanks, ordered
remusator said:
How firmly does it hold the phone. I don't care for open bottom - i used cases only for camera protection. Anyway, this thin case definitely wont absorb any shock.
What would bother me - whether the phone will not slode out during call etc.
Click to expand...
Click to collapse
I use a clear Cimo case. It's a little thicker than that one, and costs $10.00, but I'm very happy with it.
Sturdy enough that it feels like it'll protect my phone from a drop, looks good, and still shows off my phone's good looks. There are claims in the reviews that the clear version will yellow in time, but I've had mine for a few months and it's still clear. I should point out that I'm a nightshift worker so the case doesn't see a lot of UV light so your mileage may vary.
i have been using this 0.33mm thin case. initially it has a very dry powdery feel to it.. now that seems to have worn off
i not sure what material it is made up of.. can anyone guess
Ordered, thanks.
Had one of those Cimo cases.. comes w/ the One in the bonus kit if you purchase from costco. It's thinner than most phone cases, but still fairly thick (~1mm ish?). Looking forward to this .3mm
anyone have any recommendations for skin like protectors?
Links are dead. Whats the name of the case on ebay?
Yesterday I got my Protective Case (Orange) from OnePlus. It's very thin and has a great color!
Klarooo said:
Yesterday I got my Protective Case (Orange) from OnePlus. It's very thin and has a great color!
Click to expand...
Click to collapse
That orange is sweet. You get it from oneplus.net or oppomart or ...?
Like I wrote, from OnePlus
nice.link please?
http://oneplus.net/de/accessories, but out of stock atm.
You can also get it from OppoMart: http://www.oppomart.com/oneplus-one...-protective-cover-shield-for-oneplus-one.html
But I haven't gotten a case nor screen protector yet. how is the case? i really like the color options they have, but i'm not too sure about the actual case durability and how it will protect the phone.
It's pretty thin, but doesn't feel cheap. I think it wont protect much against falling down, because it's a hardcase and cant absorb the drop as good as a gel/silicon/tpu case.
Know any good looking gel/silicon/tpu cases lol? Besides diztronic. I like them, but want to see if there are other options available
Anything like the ballistics case?
Klarooo said:
http://oneplus.net/de/accessories, but out of stock atm.
Click to expand...
Click to collapse
Seems like they're back in stock now
i also got the orange one when i ordered my ONE+ and its a P.O.S., i thought it was going to be at the very least a gel/tpu type but its just a hard plastic piece that doesnt fit the device properly. the lips that on the sides dont actually stay clipped,. i even tried to warm it up under warmer water to to get it to form to the phone a bit better with no luck, even tried to use the hair dryer (not the heat gun). but to no avail...im an OTTERBOX COMMUTER person but i would love anything else right now since i dont expect otterbox to be making a case for this phone. i need something...but i wouldnt waste your money on this case...IMO
LNKNPRKFN said:
i also got the orange one when i ordered my ONE+ and its a P.O.S., i thought it was going to be at the very least a gel/tpu type but its just a hard plastic piece that doesnt fit the device properly. the lips that on the sides dont actually stay clipped,. i even tried to warm it up under warmer water to to get it to form to the phone a bit better with no luck, even tried to use the hair dryer (not the heat gun). but to no avail...im an OTTERBOX COMMUTER person but i would love anything else right now since i dont expect otterbox to be making a case for this phone. i need something...but i wouldnt waste your money on this case...IMO
Click to expand...
Click to collapse
I'd wait for the Diztronic if you're waiting for a case. Should be available soon, stay posted to the Diztronic thread on xda.
They make high quality cases, highly recommended.
Klarooo said:
Yesterday I got my Protective Case (Orange) from OnePlus. It's very thin and has a great color!
Click to expand...
Click to collapse
I like the color at least.. They're trying to get us to pay 200 SEK for shipping when the case is 89 SEK itself. I call that unworth..
Sent from my One using XDA Premium HD app
My Case fits absolut perfectly and I have no problems. I paid 10€ for the Case and 5€ for shipping, and I think I will work a while with this case, like it.
Klarooo said:
My Case fits absolut perfectly and I have no problems. I paid 10€ for the Case and 5€ for shipping, and I think I will work a while with this case, like it.
Click to expand...
Click to collapse
Do you have a link to your case?
Take a look at Page 1
Hey ppl I'm new with my OnePlus just wanting to know what are this best cases I can get with this phone that offers max protection and durability cause using this phone for the short time I've had it so far has been hands down the best android phone I've ever had so I wanna protect it what do u guys recommend? Thanks
Sent from my A0001 using XDA Premium HD app
Diztronic, hands down.
you might consider Tudia Ultra tough, but it's bulky.
What about flip case? Does anyone have any experience with good brands?
I'm looking for something like this:
http://www.ebay.com/itm/For-OnePlus...t=LH_DefaultDomain_0&var=&hash=item58b4d13365
http://www.amazon.com/OnePlus-One-Case-Revolution-Manufacturer/dp/B00TL4EUW0
I recommend this case and a tempered glass protector, you just rip out the plastic one in the case
spiderjerusalem said:
http://www.amazon.com/OnePlus-One-Case-Revolution-Manufacturer/dp/B00TL4EUW0
I recommend this case and a tempered glass protector, you just rip out the plastic one in the case
Click to expand...
Click to collapse
I didn't like that one. I ordered this one: http://m.ebay.com/itm/181532810218?_mwBanner=1
And the screen protector: http://m.ebay.com/itm/271845140819?_mwBanner=1
I got this yesterday in mail (black and white colour). Very happy with the quality and all the ports/mic holes perfectly centered. sturdy feel. I dropped my phone 3 times without the case (luckily not much damage at all.. just minor ding on corner) and then i thought of buying a case before it has spider web screen.
http://www.ebay.com/itm/NEW-GRENADE...t=LH_DefaultDomain_0&var=&hash=item43d2f6441d
Cruzerlite Bugdroid
I have been using the Cruzerlite Bugdroid TPU case. It has a slim profile while feeling quite sturdy and able to withstand a drop. All my friends who have the OnePlus One have this case. It comes in a very very wide variety of colors, too. The only downside is that it does fade after a while, but it really isn't that bad or too noticeable. The price is very reasonable for the quality of the product. It is easy to find on Amazon.
Hope this helps.
hp13 said:
I got this yesterday in mail (black and white colour). Very happy with the quality and all the ports/mic holes perfectly centered. sturdy feel. I dropped my phone 3 times without the case (luckily not much damage at all.. just minor ding on corner) and then i thought of buying a case before it has spider web screen.
http://www.ebay.com/itm/NEW-GRENADE...t=LH_DefaultDomain_0&var=&hash=item43d2f6441d
Click to expand...
Click to collapse
That is a horrible looking case[emoji21] why would you hide the design of your phone with that? Get a Tudia TPU case and you should be fine.... Oh God.
Jess813 said:
That is a horrible looking case[emoji21] why would you hide the design of your phone with that? Get a Tudia TPU case and you should be fine.... Oh God.
Click to expand...
Click to collapse
I think that and the Tudia cases are ugly lol. Personally prefer the Diztronic or the Orzly fusion cases
Galactus said:
I think that and the Tudia cases are ugly lol. Personally prefer the Diztronic or the Orzly fusion cases
Click to expand...
Click to collapse
Agreed, they're not the best looking they were the first to pop into my head, but come on man, that case on eBay he posted....[emoji40] .
Jess813 said:
Agreed, they're not the best looking they were the first to pop into my head, but come on man, that case on eBay he posted....[emoji40] .
Click to expand...
Click to collapse
Lool agreed
Sent From My OnePlus One
I ordered thr bugdroid...but i dont like it..so i ordered a Pelosi with sandstone back...i like it...but case can't really protect our phone if you make it drop ...waiting for the Nilkin zone...i ordered a black one & a red one. I really miss my Spigen cases i had on m'y N5 and GS2
Nillkin frosted is the best
4unwired said:
Diztronic, hands down.
Click to expand...
Click to collapse
Agreed, Diztronic ftw... dirt cheap but very good, even fast shipping (7 days to the Netherlands, NEVER longer... ordered like 6 different times)
http://www.tpu-cases.com/index.php?main_page=product_reviews&cPath=104_105&products_id=418
Make sure you get the one I linked to, with the slightly bigger corners, better protection
I've had the Diztronic case for around 7 months now and it's been perfect. Protected when dropped, not too bulky, slight raised lip on screen side to protect screen when placed screen face down.
The only negative I can think of is that it does add a bit of weight to the phone, although I'm sure that is inevitable based on the protection it gives and also the sturdy nature of the material it is made from.
takkischitt said:
I've had the Diztronic case for around 7 months now and it's been perfect. Protected when dropped, not too bulky, slight raised lip on screen side to protect screen when placed screen face down.
The only negative I can think of is that it does add a bit of weight to the phone, although I'm sure that is inevitable based on the protection it gives and also the sturdy nature of the material it is made from.
Click to expand...
Click to collapse
Exactly... you want protection? Then you're gonna feel it
Try a casemate barely there on your phone and see if it protects... makes me wanna cringe immediately
I wouldn't wanna droptest with that on, or any other "lookyoucanhardlyseeandfeelmebecauseIamsothin" case
if you like TOTAL protection i recommend TWO cases TUDIA OMNIX and POETIC. i have the TO and my experience to it is that the covers of the audio and charger ports are not good if you use them for a prolong period of time they dont go back easily i mean there is a small part of the cover that tends to stay open.
FOR POETIC, i saw reviews both Oneplus.net and amazon they say that it is much better than TO it is much thin than the TO and the ports are much better.
Another great feature about the Diztronic is the way it covers the side buttons and gives them a more sturdy feel. I got another case previously and it had cut out for the buttons, but it was a pain trying to press them as the OnePlus One's side buttons are so small.
Sent from my OnePlus One
If anyone is looking to get rid of their OEM orange and yellow cases, I would be willing to buy. Message me if anything.
Sent from my A001 using XDA Free mobile app