Yesterday i was upgrading my phone from B368 to B369, and wronging by impatience, i decided to shut down while my phone was apparently blocked on the NAG screen (your phone has been unlocked and can't be trusted screen at startup); in truth, it wasn't blocked but it was just applying updates during reboot and he was tooking some more time than usual... The result? My model number changed from BLN-L21 to generic_a15, and so apps like camera was keeping crashing and became not usable.
After had restored a TWRP backup made before updating, and so on B368 build, i ended up with BLN-L21C432B369 as build number, but without having the latest security patch and latest improvements. In poor words, the B369 build was shown even if i was on B368 at all, and so system update wasn't detecting any other updates since that i was apparently on the latest build.
[DISCLAIMER: don't point your finger on me if you end up with your phone exploding, emitting toxic spores or radiations, please. I'm just putting this simple guide here as a way to possibly solve your issue, but i can't know if it'll works on EVERY different model, variant or kind of issue; in mine case it worked like a charm, but BE CAREFUL. I'm not responsable for anything]
What i did for fix this issue was very, very simple, much simpler than what i thought to face; i just started combing here and there in the various root folders thanks to a root explorer (i used MiX, for example) containing the various local.prop and build.prop files scattered around the system folders, until i found the right one to tweak with. The path to follow is very simple: you just need to browse to
Code:
root/version/special cust/BLN-L21/hw/eu/prop/local.prop
(note that the path will obviously change if you own a BLN-L22, a BLL-L22, ecc. but the road will be always the same - you'll find other folders name after special cust, BLL-L22 other than BLN-L21, china instead of eu for example, but often it's always straight to the last folder that finally contains the local.prop file)
and once there, with the help of a text editor, correct all the errors that you'll find mismatching with your actual build number. The voices that i had to correct are circled in orange in the picture that i attached here below, (note: the picture shows voices already fixed) and there was four of them to adjust;
Code:
ro.build.display.id=BLN-L21C432[B][COLOR="Red"]B369[/COLOR][/B]
ro.build.version.incremental=C432[B][COLOR="red"]B369[/COLOR][/B]
ro.build.description=BLN-L21 -user 7.0 HONORBLN-L21 C432[B][COLOR="red"]B369[/COLOR][/B] release-keys
ro.build.fingerprint=HONOR/BLN-L21/HWBLN-H:7.0/HONORBLN-L21/C432[B][COLOR="red"]B369[/COLOR][/B]:user/release-keys
since that in this case i was on B368 other than B369, as shown by phone info in settings menu, i just tried to modify that number with an 8 instead of a 9, gave the phone a reboot and... It's done!
**Method Update!**
@BakedOnSomeSour pointed out a way to definitely correct the build number, permanently and safer than my method!
To do this, flash the version.img matching your firmware build, an image that you can extract from the UPDATE.APP of each update.zip package through TWRP (flash the file as image of course, by selecting the dedicated option in TWRP menu). In this way, the build number will be definitely fixed!
Thanks to BakedOnSomeSour for finding a faster and more efficient method.
Be aware, and backup before doing this or everything you're dubious about.
Cheers
nice one buddy and a detailed one...Thanks for sharing with us. as usual, great effort.
shashank1320 said:
nice one buddy and a detailed one...Thanks for sharing with us. as usual, great effort.
Click to expand...
Click to collapse
Thanks mate. I discovered how to do by myself while trying to get rid of this error, and so i thought to share with others who could face this in future.
nice one D
just curious, can we use the same trick to revert the model number when it's changed to generic_a15
sreekantt said:
nice one D
just curious, can we use the same trick to revert the model number when it's changed to generic_a15
Click to expand...
Click to collapse
Nice question dude, i was just asking myself the same. Maybe, modifying eventual errors in the same file, or alternatively in the one in root/version/etc/component_version.txt (here there is a file with only one string with the general model; mine shows "Version-BLN-L21-432000 5.0.0.1(N.17110801)" obviously, but if it should show something relative to generic_a15, modifying it could do the trick) it could be possible to easily fix this issue. I'd like to test it by myself, but at the moment I'd like to avoid to mess up my phone again also since that I'm busy with other stuff anyway I'll finally test this sooner, and eventually I'll update the guide.
RedSkull23 said:
Nice question dude, i was just asking myself the same. Maybe, modifying eventual errors in the same file, or alternatively in the one in root/version/etc/component_version.txt (here there is a file with only one string with the general model; mine shows "Version-BLN-L21-432000 5.0.0.1(N.17110801)" obviously, but if it should show something relative to generic_a15, modifying it could do the trick) it could be possible to easily fix this issue. I'd like to test it by myself, but at the moment I'd like to avoid to mess up my phone again also since that I'm busy with other stuff anyway I'll finally test this sooner, and eventually I'll update the guide.
Click to expand...
Click to collapse
yeah same with me - don't wanna delay other things as of now... :highfive:
I would like to switch my build number so i can receive an OTA since it is currently messed up. Every time i change the build number i get an update available. But in order to install i have to remove root and TWRP. When i remove those the build goes back to original and my phone cant find an update because it says im on the lastest build. Why does it switch back when i remove twrp and root? Im assuimg it may have something to do with the boot image?
BakedOnSomeSour said:
I would like to switch my build number so i can receive an OTA since it is currently messed up. Every time i change the build number i get an update available. But in order to install i have to remove root and TWRP. When i remove those the build goes back to original and my phone cant find an update because it says im on the lastest build. Why does it switch back when i remove twrp and root? Im assuimg it may have something to do with the boot image?
Click to expand...
Click to collapse
Yes, i assume that too... Maybe when the root is removed and the original boot.img is restored, the error is restored too. You could maybe solve that by flashing the boot.img of the build just before the one you'd like to update to (but be aware and take a backup before, in case something happens. Once i flashed a boot.img of a previous build instead of the one that i had to flash, and at phone startup, my code to unlock wasn't anymore recognized, so i had to restore a backup)
RedSkull23 said:
Yes, i assume that too... Maybe when the root is removed and the original boot.img is restored, the error is restored too. You could maybe solve that by flashing the boot.img of the build just before the one you'd like to update to (but be aware and take a backup before, in case something happens. Once i flashed a boot.img of a previous build instead of the one that i had to flash, and at phone startup, my code to unlock wasn't anymore recognized, so i had to restore a backup)
Click to expand...
Click to collapse
Flashing a boot.img is having no effect on the build number. The strange thing is im on b366 but my phone wont accept that firmware with the dload method. It only accepts firmware much lower. I just need that build number to change without root but no amount of flashing does anything. Ive had a ton of android phones and they've never been as unpredictable as this one.
Edit: Flashing a version.img and vendor.img see to do it.
BakedOnSomeSour said:
Flashing a boot.img is having no effect on the build number. The strange thing is im on b366 but my phone wont accept that firmware with the dload method. It only accepts firmware much lower. I just need that build number to change without root but no amount of flashing does anything. Ive had a ton of android phones and they've never been as unpredictable as this one.
Edit: Flashing a version.img and vendor.img see to do it.
Click to expand...
Click to collapse
Reading that i was worrying, since that I'm about to update to B369 again after that Magisk V15.0 ****ed up my build.prop and other stuff too, and i thought the boot.img could fix that... But I'm glad you solved it. Both of them are needed so, or only one it's ok? By the way yeah, i can say that Huawei and their cosmos of firmware builds, different for every variant, is way too complicated. A project like Project Treble is what they need.
RedSkull23 said:
Reading that i was worrying, since that I'm about to update to B369 again after that Magisk V15.0 ****ed up my build.prop and other stuff too, and i thought the boot.img could fix that... But I'm glad you solved it. Both of them are needed so, or only one it's ok? By the way yeah, i can say that Huawei and their cosmos of firmware builds, different for every variant, is way too complicated. A project like Project Treble is what they need.
Click to expand...
Click to collapse
Well after flashing them the phone booted but I was unable to get into developer settings. It just kept crashing. It did change the build number though even after flashing to stock recovery without root. I flashed both through twrp. Maybe that was the problem. Maybe you can just try flashing version.img and let us know if it helped. I would try it without vendor.img first.
BakedOnSomeSour said:
Well after flashing them the phone booted but I was unable to get into developer settings. It just kept crashing. It did change the build number though even after flashing to stock recovery without root. I flashed both through twrp. Maybe that was the problem. Maybe you can just try flashing version.img and let us know if it helped. I would try it without vendor.img first.
Click to expand...
Click to collapse
I can extract the version.img of B368, but once i have it it's possible to flash it through fastboot/TWRP, or i have to follow another path, like typing somethin' by adb like "dd if=/sdcard/version.img of=/dev/block/mmcblck..." ?
RedSkull23 said:
I can extract the version.img of B368, but once i have it it's possible to flash it through fastboot/TWRP, or i have to follow another path, like typing somethin' by adb like "dd if=/sdcard/version.img of=/dev/block/mmcblck..." ?
Click to expand...
Click to collapse
try fastboot first. So "fastboot flash version VERSION.img". If that doesn't work flash it in TWRP.
After its flashed try removing root and flash a stock recovery and see if the build number stays.
BakedOnSomeSour said:
try fastboot first. So "fastboot flash version VERSION.img". If that doesn't work flash it in TWRP.
After its flashed try removing root and flash a stock recovery and see if the build number stays.
Click to expand...
Click to collapse
Yeah got that, thanks. I'll write here a feedback as i'll be able to do this
@BakedOnSomeSour okay i bring nice notices, here's what i did.
I tried first to flash the BLN-L21_data_hw_eu package from official firmware around 700MB by TWRP, but after some bloat apps installed that i always remove as i update, it failed with error 7 (if i don't remember bad). So i restored a backup made just before flashing it, to avoid issues of any kind.
Then i tried to flash version.img by fastboot, but it failed with error command not allowed.
Finally, i simply flashed the version.img through TWRP, then i completely removed Magisk, i flashed by fastboot the stock boot and recovery images as i do when i make an update, and... It worked. After booting to OS, my build number remained correct. It stopped from turning back to B369 after a reboot (even if I'm on B368 at all), solving the issue that i was facing. Thanks for the tip, I'll add it to the guide if you'd like to be credited
RedSkull23 said:
@BakedOnSomeSour
Then i tried to flash version.img by fastboot, but it failed with error command not allowed.
Click to expand...
Click to collapse
New mess with Huawei every day. They keep stopping us and we keep trying them
RedSkull23 said:
@BakedOnSomeSour okay i bring nice notices, here's what i did.
I tried first to flash the BLN-L21_data_hw_eu package from official firmware around 700MB by TWRP, but after some bloat apps installed that i always remove as i update, it failed with error 7 (if i don't remember bad). So i restored a backup made just before flashing it, to avoid issues of any kind.
Then i tried to flash version.img by fastboot, but it failed with error command not allowed.
Finally, i simply flashed the version.img through TWRP, then i completely removed Magisk, i flashed by fastboot the stock boot and recovery images as i do when i make an update, and... It worked. After booting to OS, my build number remained correct. It stopped from turning back to B369 after a reboot (even if I'm on B368 at all), solving the issue that i was facing. Thanks for the tip, I'll add it to the guide if you'd like to be credited
Click to expand...
Click to collapse
Im glad it all worked out :victory: Sure if you want to give me credit. Im just glad i could help
shashank1320 said:
New mess with Huawei every day. They keep stopping us and we keep trying them
Click to expand...
Click to collapse
What a bore is this, man?! :laugh: never admitting a loose against them!
BakedOnSomeSour said:
Im glad it all worked out :victory: Sure if you want to give me credit. Im just glad i could help
Click to expand...
Click to collapse
Of course, you deserve that :highfive: thanks for the idea, even faster than my workaround (and maintains properties overall)
RedSkull23 said:
What a bore is this, man?! :laugh: never admitting a loose against them!
Of course, you deserve that :highfive: thanks for the idea, even faster than my workaround (and maintains properties overall)
Click to expand...
Click to collapse
Never
Happy new year brother. Hope we continue to grow in year ahead with more mess and fixes with Huawei phones :silly:
shashank1320 said:
Never
Happy new year brother. Hope we continue to grow in year ahead with more mess and fixes with Huawei phones :silly:
Click to expand...
Click to collapse
Thanks pal, wish you the same i can say that until I'll have an Honor device, that will be almost at day order
Related
Can not wait for the official Nougat version! Here are the latest model which I can get for you.
Not much to say，here's link for QA1, every person can flash that with Odin and then OTA to Nougat by @norbarb 's way.
Simply speaking, upgrade is divided into two steps. First flash my QA1. Then usd adb update to QC5.
Flash QA1 by Odin:
https://mega.nz/#!EFAiXTKC!S0LvpCIedF_ubVgszflUaN3U_O2zwQoeH6ku68gqnDM
QA1-QC5 Adb files from @norbarb
https://docs.google.com/uc?id=0B4sOy1rlqVoYdnROaFU4LXQybjA&export=download
Warning
Whether Odin or Adb will formate data on your phone. Please backup and then do it.
smxwang said:
Can not wait for the official Nougat version! Here are the latest model which I can get for you.
Not much to say，here's link for QA1, every person can flash that with Odin and OTA to Nougat by @norbarb 's way.
Simply speaking, upgrade is divided into three steps. First flash my QA1. Then usd adb update to QB2. Finaly using adb update to QC5.
Flash QA1:
https://mega.nz/#!EFAiXTKC!S0LvpCIedF_ubVgszflUaN3U_O2zwQoeH6ku68gqnDM
QA1-QB2:
https://forum.xda-developers.com/att...-plus-t3563086
QB2- Nougat:
https://forum.xda-developers.com/att...rvers-t3574757
Click to expand...
Click to collapse
Thanks man...great job
Is this ready for "daily driving"?
Iam on PBH4 (agaust security patch)
can i flash QA1 directly?
TeldenW said:
Is this ready for "daily driving"?
Click to expand...
Click to collapse
Working great for me as DD. Battery life is better than 6.x, but I'd expect that it'd be a little better anyway after a full wipe & fresh install.
samsung lo said:
Iam on PBH4 (agaust security patch)
can i flash QA1 directly?
Click to expand...
Click to collapse
I was on the PK1 yesterday, then I ODIN'd to PL1 (using Norbarb's instuctions and wiped my device in the process).
I then realized that since the device was already wiped, I simply ADB directly to QC5 (as it was already 1.5GB in size and should already contain the previous updates).
Battery life is now horrible, although I'm still trying to get used to the new features by turning off / disabling what I don't need. The update is worth it. as the theme makes me "feel" as though I got a new device. The touchwiz additions replace quite a number of third party apps that I'd have downloaded separately otherwise.
jaxf250 said:
Working great for me as DD. Battery life is better than 6.x, but I'd expect that it'd be a little better anyway after a full wipe & fresh install.
Click to expand...
Click to collapse
As you probably did, I'm using a non-rooted AT&T Galaxy Note 5 (N920A}. I'm familiar enough with ODIN to know that I'll probably mess it up the first try... And spend a lot of time figuring out my mistakes.
Did you have any difficulty with the update process?
TeldenW said:
As you probably did, I'm using a non-rooted AT&T Galaxy Note 5 (N920A}. I'm familiar enough with ODIN to know that I'll probably mess it up the first try... And spend a lot of time figuring out my mistakes.
Did you have any difficulty with the update process?
Click to expand...
Click to collapse
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH
I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware. Please let me know there if you want 4CQA1 to 4EQC6 update also.
jaxf250 said:
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH
Click to expand...
Click to collapse
Dude, thanks man. I'm gonna do my research over the next couple days.
Good lookin' out.
norbarb said:
I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware.
Click to expand...
Click to collapse
I just got QC5 sideloaded last night. I stayed up restoring my apps and data as close as I had it before on my PK1. This was a time-consuming process.
norbarb said:
Please let me know there if you want 4CQA1 to 4EQC6 update also.
Click to expand...
Click to collapse
You can't now just drop the QC6 on me like that so I have to go through that process all over again.
Hence I'll say "No, thank you" :highfive:
norbarb said:
I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware. Please let me know there if you want 4CQA1 to 4EQC6 update also.
Click to expand...
Click to collapse
that's great. No matter what new model is better than elder one.
jaxf250 said:
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH
Click to expand...
Click to collapse
Where did you find the QA1-to-QB2 file?
trsanning said:
Where did you find the QA1-to-QB2 file?
Click to expand...
Click to collapse
Here : http://forum.xda-developers.com/showthread.php?p=71184332
Originally from servers
Clicking from Edge of Galaxy
Help
Hello !
Please help, yesterday i try slideload with ADB from U2AOI6 to U2APB2 , i don't know how i did it, but now i have bootloop and messages " dm-verity verification failed "... " update from ADB is disabled " in downloading mode ... Is there any issue to do not loose my data. ..? If not, is the link of S4CQA1 provide here sufficient to make a full flash with odin ?
dakkidd said:
Hello !
Please help, yesterday i try slideload with ADB from U2AOI6 to U2APB2 , i don't know how i did it, but now i have bootloop and messages " dm-verity verification failed "... " update from ADB is disabled " in downloading mode ... Is there any issue to do not loose my data. ..? If not, is the link of S4CQA1 provide here sufficient to make a full flash with odin ?
Click to expand...
Click to collapse
ADB sideload always wipes after it completes
There is an app named Flashify which does not wipe after applying updates but that only works on rooted phones (and you cant root the AT&T Note 5)
Therefore no, there is (currently) no way to prevent sideload wipe
Thank you very much Dezborders!
Now it will be my first time to use Odin, pleaz can you give me the link of the more stable marshmallow for you on N920A... ?
dakkidd said:
it will be my first time to use Odin, pleaz can you give me the link of the more stable marshmallow for you on N920A... ?
Click to expand...
Click to collapse
Seriously dude!
See Page 1 Post 1 Link 1 of this thread.
dezborders said:
Seriously dude!
See Page 1 Post 1 Link 1 of this thread.
Click to expand...
Click to collapse
Lool... I have seen, but the idea was that the last update is not necessary the more stable... But ok, i'll do whith...
Thank you very much.
Sorry for my english, it's not my first speech :good:
Hello all!
This morning I updated Magisk Manager.
Once updated (or perhaps only downloaded update) the app prompted a reboot.
I rebooted and ended up in TWRP.
But I did not know what to do in TWRP so I rebooted system...
However, now the phone cannot boot and after one try it reboots into TWRP again.
PLEASE HELP ME!
I need my phone for work! Like now-now! :silly: :crying:
dustylambo said:
Hello all!
This morning I updated Magisk Manager.
Once updated (or perhaps only downloaded update) the app prompted a reboot.
I rebooted and ended up in TWRP.
But I did not know what to do in TWRP so I rebooted system...
However, now the phone cannot boot and after one try it reboots into TWRP again.
PLEASE HELP ME!
I need my phone for work! Like now-now! :silly: :crying:
Click to expand...
Click to collapse
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
timbernot said:
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
Click to expand...
Click to collapse
Well, that rabbit went into quite the hole... hehe
However, at the other end was a person who restored an old backup to revert this problem... And I -MAYBE- have an old backup on my external hdd, but won't that wipe all data that has been written to my phone since that "MAYBE" backup?
The other suggestion was wiping my MISC-partition using commands through ADB - something I have no clue how to setup and/or execute.
Still, thank you so much for your effort!
Reading all of this made me remember that one time I spaced out and tried to install an official firmware update upon release and prompt, which lead to the same issue. I could then just reinstall an older raw firmware version, which left all my files and data intact. Hopefully this will work here too.
BUT... It still feels very risky. If anyone out there has any sure-fire solution to this update Magisk Manager through the built-in updater no-boot issue, then please feel free to let me know - I would be forever in your debt
The best surefire solution is just don't. And BTW always backup before you flash anything in twrp.
Sent from my ASUS_Z00A using Tapatalk
---------- Post added at 08:49 AM ---------- Previous post was at 08:47 AM ----------
timbernot said:
How soon is now ? follow the white rabbit:good:
https://forum.xda-developers.com/zenfone2/help/help-bootloop-to-recovery-t3577504
Click to expand...
Click to collapse
I love what you did there! Lol
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
The best surefire solution is just don't. And BTW always backup before you flash anything in twrp
Click to expand...
Click to collapse
I didn't flash anything in twrp. If you're gonna reply at least read the post. Also, none of what you wrote is a solution, unless you're in possession of a time machine. I'll keep it in mind for the next time though (of which there won't be one). Thanks, captain hindsight.
dustylambo said:
I didn't flash anything in twrp. If you're gonna reply at least read the post. Also, none of what you wrote is a solution, unless you're in possession of a time machine. I'll keep it in mind for the next time though (of which there won't be one). Thanks, captain hindsight.
Click to expand...
Click to collapse
That's what the update does. Reboots to twrp and installs the download. Maybe you should know what you're doing before you snap at us.
Sent from my ASUS_Z00A using Tapatalk
dustylambo said:
However, at the other end was a person who restored an old backup to revert this problem... And I -MAYBE- have an old backup on my external hdd, but won't that wipe all data that has been written to my phone since that "MAYBE" backup?
Click to expand...
Click to collapse
No, just restore the boot partition (16MB).
I learnt the hard way about backup, when years ago I didn't make one for my Galaxy S2 and lost everything (pictures, etc). Now after installing TWRP I always do a backup...
You should be able to reflash your boot partition with a fastboot command like "fastboot flash boot boot.img" (people with more knowledge than me can help you)
EDIT: the problem is that our Zenfone2 needs a signature for the boot partition, this is why we have a special Magisk installer that just add the signature to the image. The automatic update installer of Magisk has no clue about this, me and a few others here made the same mistake as you when Magisk popup "I have an update!" and we clicked "Install"...
All your data and app are still there, do not worry, no need to wipe anything, just reflash a signed boot.
kenbo111 said:
That's what the update does. Reboots to twrp and installs the download. Maybe you should know what you're doing before you snap at us.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Look... I am sorry if I "snapped" as you put it... But let's make one thing clear - I snapped at YOU; there is no "us" in this case, as you tried to skew it. Don't lump yourself together with these other helpful people, because so far you have nothing in common to me. If I were looking for someone to go "Hey, I got a solution - you know that thing you did? - Don't do it again!" I'd just go stand on the street corner with a sign asking for someone to slap my face.
As for your principal of don't do things if your not sure of how they work, I am totally behind that. But it has NOTHING to offer here as we are past that point. A broad comparison would be like "a solution to world hunger = eat food" ("but we don't have any food!" "you should have thought of that before you started starving now shouldn't you...?!").
In your defense, I guess you really believe you are trying to help. But compare your comment to the other ones posted and it is quickly clear that you are not. However, YOU ARE RIGHT, I should've known better and shouldn't do it again. And obviously I am enerved at this situation, but equally obvious (now) is that what you wrote is NOT "the best sure-fire solution" as what was posted afterward seems at least 100% (would have been more if possible) more applicable to my issue.
Anyway, I'll do the right thing here in the end, after having said so many things, and admit, once again, that I was wrong, you were right, I snapped for no good reason and you were just trying to help.
And I sincerely apologize for my rude behaviour. Hopefully now you can at least understand my reaction.
Also, fair is fair - Maybe TWRP flashes the update before it even enters into it. It would be the first I've EVER heard of something like that. But I am out of my element a bit here, so I will withdraw that comment and once again apologize for snapping at you because of it.
Magister54 said:
No, just restore the boot partition (16MB).
I learnt the hard way about backup, when years ago I didn't make one for my Galaxy S2 and lost everything (pictures, etc). Now after installing TWRP I always do a backup...
You should be able to reflash your boot partition with a fastboot command like "fastboot flash boot boot.img" (people with more knowledge than me can help you)
EDIT: the problem is that our Zenfone2 needs a signature for the boot partition, this is why we have a special Magisk installer that just add the signature to the image. The automatic update installer of Magisk has no clue about this, me and a few others here made the same mistake as you when Magisk popup "I have an update!" and we clicked "Install"...
All your data and app are still there, do not worry, no need to wipe anything, just reflash a signed boot.
Click to expand...
Click to collapse
NOW THIS IS HELPING!
THANK YOU SO MUCH!
Basically, you are saying that I would, in theory, just have to use fastboot and flash boot.img (extracted from any firmware?) again, which I am very familiar with how to do, and presto - boot partition restored and working (once again, in theory)?
Sounds amazing!:good:
dustylambo said:
NOW THIS IS HELPING!
THANK YOU SO MUCH!
Basically, you are saying that I would, in theory, just have to use fastboot and flash boot.img (extracted from any firmware?) again, which I am very familiar with how to do, and presto - boot partition restored and working (once again, in theory)?
Sounds amazing!:good:
Click to expand...
Click to collapse
Yes, if you have a Z00A for instance with MM version 223, take the Z00A.zip file from https://forum.xda-developers.com/zenfone2/general/bl-unlock-ze551ml-toolkit-t3546293 and use the file stock\z00a\223\boot.img
This is stock unsigned boot.img file for M .223
http://www.mediafire.com/file/rw73099svgbv0kv/boot.img
timbernot said:
boot.img file for M .223
http://www.mediafire.com/file/rw73099svgbv0kv/boot.img
Click to expand...
Click to collapse
Is there any way to check from TWRP or using fastboot, or otherwise find out what version of the rom I have (had)?
I am definitely still on LolliPo... I think I am one or two official updates from the switch to MarshMallow... But how can I be sure?
WW_ZE551ML_2.20.40.139_sal358-amtech.vn
Last year sometime I ran into a similar problem, where I had to flash raw firmware in order to unbrick the phone... This is the firmware that I downloaded and flashed then.
However, within this .raw-file there is no boot.img ...? There are a couple of .img-files, but none named boot.
On a side-note: When I bricked it last year and had to flash this raw firmware, which I did with Asus Flash Tool, if I am not mistaken... However, whichever way I did it, I managed to flash and then boot as usual. The phone then updated all apps, and I was just blessed with this wonderful sight of "my phone" with all the apps, files and data still intact.
And this problem, which resulted in the same boot issue, came from trying to apply an official OTA update, just after rooting and unlocking the bootloader (forgot myself for just a moment there), which to me seems like a way more serious screw-up than what I just managed to do today...?
@dustylambo
You still boot to TWRP ?
Simple questions
check date of back ups , course you won't be able to restore but title will have builds.
What twrp build ?
Then....
Select reboot in twrp then power off in twrp .
Wait 15 seconds...
Power plus vol+ , you can now boot to bootloader.
What IFWI version ?
0094.0177 or .0173 is LP
0094.0183 is M
Flash relevant raw , without ticking wipe data in AFT.
Check my unbrick thread in my signature for AFT and links to raws
Enjoy
timbernot said:
@dustylambo
You still boot to TWRP ?
Simple questions
check date of back ups , course you won't be able to restore but title will have builds.
What twrp build ?
Then....
Select reboot in twrp then power off in twrp .
Wait 15 seconds...
Power plus vol+ , you can now boot to bootloader.
What IFWI version ?
0094.0177 or .0173 is LP
0094.0183 is M
Flash relevant raw , without ticking wipe data in AFT.
Check my unbrick thread in my signature for AFT and links to raws
Enjoy
Click to expand...
Click to collapse
Yes, I still boot into TWRP.
I can't find my old backup for some reason, but after flashing the previously mentioned raw firmware I never up- or downgraded the ROM, so it MUST be that version. It's the only one I've ever downloaded and flashed.
IFWI version is 0094.0183
But so you are saying I could basically just flash [correct version FW].raw via AFT, without wiping data, and all should be good?
I am on your unbrick thread aws.
I will def bookmark it.
But I already have AFT and the same FW... so I could just go-go-go, right? Or is the IFWI version being M an issue?
Also, I downloaded the official Asus FW from their ZF2 website. In that .zip is in fact a "boot.img" - can I flash this via fastboot you think?
Thanks again for all your help!
You are unbelievable!
@dustylambo
0094.0183 is M
So flash a M raw.
You must've upgraded bootloader since flashing the last raw .139 which is LP to get to M bootloader .0183
In bootloader .0183
You flash raw for M, these have just been added by realyoti
drop him a thanks .
Flash without ticking wipe data in AFT
Damnit! I don't like where this is going... But it's late and I'm dumb
I never upgraded to M because I read that there were several apps that would lose support, MUSIC in particular, but there were others as well.
Will an M raw-file flash and still boot with all my old apps?
@dustylambo
It's simple really , what is the twrp build number ?
You never said
0094.0177
Is locked 5 LP bootloader.
.0173 is 5 unlocked bootloader
.0183 is M
What twrp build is yours ?
Ps , I don't think it matters which version raw you flash , only that it may fail and might have to wipe data to succeed which is better than what you have and are struggling with right now
gnite , enjoy
---------- Post added at 11:45 PM ---------- Previous post was at 11:30 PM ----------
Pls , remember the reason you installed twrp initially ?
For backing up
Sounds like you didn't only update Magisk Manager, you update Magisk itself. A non-signed Magisk update will always result in bootloop.
adobrakic said:
Sounds like you didn't only update Magisk Manager, you update Magisk itself. A non-signed Magisk update will always result in bootloop.
Click to expand...
Click to collapse
To be corrected: Not the Magisk, but the repacked boot.img. ?
Sent from my Redmi 3 using XDA Labs
Hi everyone, this all started when I tried to flash a patched boot image for root and seemed to get worse from there. There's no data on the phone that I care about so just wiping it and getting it to boot would be preferable.
I've tried using the skipsoft toolkit (I have the ultimate version if that helps any) to try and get it to flash a freshly downloaded stock image, but for whatever reason after answering all the questions it extracts everything, does all the checks, then says "device is not set" and just jumps back to the main menu.
I've tried downloading the factory image right and running the flash-all script, it goes through the entire process which looks promising, but then just reboots the phone, I get the nice "your device is corrupt" message, press the power button to continue, but then it just hangs at the white "Google" splash screen with the little unlocked icon at the bottom, and doesn't move past that.
I know the version that I had on here prior to the problems was 8.0.0 (OPD1.170816.010, Sep 2017), so that's the one I've been trying to work with.
Not really sure where to go next, hoping someone has some advice for me.
Thanks everyone.
how long are you waiting for it at the splash screen? let it go for about 20 minutes before you do anything else.
other than that, go into recovery, wipe and try to install factory images again
Never use a toolkit, they can hide error messages and displays that can help diagnose some issues. Always try the step by step methods to rescue provided by the excellent guides available here.
uicnren said:
how long are you waiting for it at the splash screen? let it go for about 20 minutes before you do anything else.
other than that, go into recovery, wipe and try to install factory images again
Click to expand...
Click to collapse
Thank you very much for your response. I left it at the splash screen for a pretty long time.. probably about a half hour at one point.. nothing was happening.
However right now when I boot into recovery I get the little android dude on his back and it says "No command"..
krash2k said:
Thank you very much for your response. I left it at the splash screen for a pretty long time.. probably about a half hour at one point.. nothing was happening.
However right now when I boot into recovery I get the little android dude on his back and it says "No command"..
Click to expand...
Click to collapse
Thats correct, while on that screen, hold the power button and tap vol up, you will then be in recovery, do a factory reset.
Also, make sure your adb/fastboot are up to date.
I would recommend trying to install the latest 8.0 images as well.
If all else fails, wipe the devices, grab whichever stable system image you want, then manually flash all the files 1 by 1. See HERE for some guidance.
uicnren said:
Thats correct, while on that screen, hold the power button and tap vol up, you will then be in recovery, do a factory reset.
Also, make sure your adb/fastboot are up to date.
I would recommend trying to install the latest 8.0 images as well.
If all else fails, wipe the devices, grab whichever stable system image you want, then manually flash all the files 1 by 1. See HERE for some guidance.
Click to expand...
Click to collapse
Thank you again for all the advice.
- Downloaded 8.0.0 (OPD1.170816.025, Nov 2017)
- I believe my rookie mistake was using the previous versions of adb/fastboot that I've had for a while.. on google's SDK website it clearly says ***26.0.2 (October 2017) Add support for Pixel 2 devices*** in their changelog.
- Extracted the factory image and ran the flash-all script
Looks like a success, booted into the initial android setup right now after like 30 seconds. I appreciate all of the help.. I honestly wouldn't have thought of updating those binaries without being advised to.
krash2k said:
Thank you again for all the advice.
- Downloaded 8.0.0 (OPD1.170816.025, Nov 2017)
- I believe my rookie mistake was using the previous versions of adb/fastboot that I've had for a while.. on google's SDK website it clearly says ***26.0.2 (October 2017) Add support for Pixel 2 devices*** in their changelog.
- Extracted the factory image and ran the flash-all script
Looks like a success, booted into the initial android setup right now after like 30 seconds. I appreciate all of the help.. I honestly wouldn't have thought of updating those binaries without being advised to.
Click to expand...
Click to collapse
:good:
uicnren said:
:good:
Click to expand...
Click to collapse
Circling back to how this all began, do you think those old binaries would have caused this to happen in the first place?
What I originally did was push the stock boot.img to the device, used Magisk Manager to patch it, then pulled the patched_boot.img from the device. Then booted into the bootloader and did
fastboot flash boot patched_boot.img
I know it was an old version and it would be a complete assumption that that's what went wrong -- but do you think there is a chance of that? (asking because I'd still really like to root this thing)
krash2k said:
Circling back to how this all began, do you think those old binaries would have caused this to happen in the first place?
What I originally did was push the stock boot.img to the device, used Magisk Manager to patch it, then pulled the patched_boot.img from the device. Then booted into the bootloader and did
fastboot flash boot patched_boot.img
I know it was an old version and it would be a complete assumption that that's what went wrong -- but do you think there is a chance of that? (asking because I'd still really like to root this thing)
Click to expand...
Click to collapse
honestly, Im not sure. But I also didnt think it would make a difference when flashing the stock images back, but it does. I guess anything is possible.
Yep.. it definitely did. I guess this is a lesson for knuckleheads like me who start messing around before properly updating everything.
I just did all of the same things I did earlier, and it booted fine, with root. Lots of wasted hours over a dummy move.
Thanks again for all the help!
I am having the exact same issue, but I cannot seem to find a fix. I have updated my adb & fastboot. I am trying to update my device to the latest 8.1 image. Currently, my device is on 8.0. I ham not sure what I am doing wrong. Are you all unzipping .zip image file inside of the factory image zip as well?
State.of.mind said:
I am having the exact same issue, but I cannot seem to find a fix. I have updated my adb & fastboot. I am trying to update my device to the latest 8.1 image. Currently, my device is on 8.0. I ham not sure what I am doing wrong. Are you all unzipping .zip image file inside of the factory image zip as well?
Click to expand...
Click to collapse
That zip inside the factory image needs to stay zipped. You can extract it for the purpose of getting the boot.img for use at a latter date. However, if your flashing the full factory image, then it needs to stay zipped :good:
Badger50 said:
That zip inside the factory image needs to stay zipped. You can extract it for the purpose of getting the boot.img for use at a latter date. However, if your flashing the full factory image, then it needs to stay zipped :good:
Click to expand...
Click to collapse
Thank you. I didn't know that I had to click and run the flash file. I thought I could just use the flash all command
State.of.mind said:
Thank you. I didn't know that I had to click and run the flash file. I thought I could just use the flash all command
Click to expand...
Click to collapse
It's the same thing (either way is doing the same thing). Just be sure that if you want to keep your data that you edit the .bat file and remove the -w switch and save before running it.
v12xke said:
It's the same thing (either way is doing the same thing). Just be sure that if you want to keep your data that you edit the .bat file and remove the -w switch and save before running it.
Click to expand...
Click to collapse
On second thought I think that it didn't work because I didn't have the factory image unzipped inside of the platform tools folder? The good news is that I'm up and running
v12xke said:
It's the same thing (either way is doing the same thing). Just be sure that if you want to keep your data that you edit the .bat file and remove the -w switch and save before running it.
Click to expand...
Click to collapse
This always causes a bootloop for me. Happened from December to January, and just now January to Feb. WTF am I doing wrong?
nickmilla15 said:
This always causes a bootloop for me. Happened from December to January, and just now January to Feb. WTF am I doing wrong?
Click to expand...
Click to collapse
Go back to the basics. Make sure you only have one copy of adb/fastboot on your rig, and that it is the very latest (december). Add that folder to your path statement/environment. Download the FULL image (not OTA). Open that zip file and extract into the same ADB/fastboot folder. Do not unzip the included, nested zip file! Open flash-all.bat and remove the -w switch and SAVE. Boot your phone to the bootloader, and then run the script either way (clicking or fastboot window). There are SO MANY better guides/tutorials out there to follow step-by-step. Maybe read/post in those if you have any further issues. Best of luck.
v12xke said:
Make sure you only have one copy of adb/fastboot on your rig, and that it is the very latest (december).
Click to expand...
Click to collapse
This was my mistake when I was having all of those problems. I was using older versions of adb/fastboot. Everything looked like it was installing alright but then it would just keep bootlooping.. was very frustrating. It was a relief when replacing those binaries with the updated ones worked flawlessly.
if you have managed to get it work then have fun otherwise just use deuces script as per the instructions provided in op.
Hey guys i have a serious problem..i tried to unlock bootloader and install another rom but my phone i think so its dead... :crying: I unlocked it succesfully,installed twrp,then rom by recovery mode,i made reboot the device,and the rom wasnt installed,so i made again reboot device in twrp by the tool https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711 and then it was like everything was deleted..no partitions nowhere,like everything had gone..and now i cant even reboot on twrp just on fastboot and i can only lock/unlock my bootloader.When i lock i take the message "Cant find vaild operating system,The device will not start....:crying: The case is that i didnt made any kind of wipe...how its possible this to happen?Can any professional guy help me here because i tried so much to bring it back to the normal condition but i dont see any solution anymore..
You have a Pixel/Nexus device. Download and flash the factory image the correct way from Google and start over.
Wich is the correct way..?i tried everything but i cant flash....:/ on other devices i had owned and tried flashing roms i didnt had this problem that i have now..
Jinthegodstyle said:
Wich is the correct way..?i tried everything but i cant flash....:/ on other devices i had owned and tried flashing roms i didnt had this problem that i have now..
Click to expand...
Click to collapse
Good instructions at top of this page, then the download for your phone model is below.
If you do not understand any step, Google it, then read and understand completely
before proceeding. Be sure you have most current version of Android Tools.
https://developers.google.com/android/images#taimen
Don't panic and make it worse. Make sure you have adb/fastboot environment and drivers on your computer and follow the directions for reinstalling stock.
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
Jinthegodstyle said:
Wich is the correct way..?i tried everything but i cant flash....:/ on other devices i had owned and tried flashing roms i didnt had this problem that i have now..
Click to expand...
Click to collapse
Here are some easy to follow steps,
All needed file, or links are also in one place.
As long as you can fastboot, you should be able to get up and running.
Good luck!
Yeah as others above have said, don't panic. I've been flashing/ rooting/modding since the way back and one thing I've learned is, it's VERY hard to brick a phone completely. Especially with newer ones, there's almost always a way to recover your phone, and especially since you have fastboot, you're not bricked either. Flash the stock rom through fastboot and you should be all set!
also make sure that your cable is good. i had major problems with many cables. finally one cable actually worked. took me hours to realize tha the cables were the culprits.
I noticed in your comment you said you could lock and unlock the bootloader I hope you didn't lock it when you had a ROM installed you might be screwed if that's the case.
mac796 said:
I noticed in your comment you said you could lock and unlock the bootloader I hope you didn't lock it when you had a ROM installed you might be screwed if that's the case.
Click to expand...
Click to collapse
THIS IS A PUBLIC SERVICE ANNOUNCEMENT. People, Please stop locking your bootloader. It may or may not be this guys issue but it certainly "can" destroy your phone if your not 100% stock!!
thx alot eveyrone for your answers..i step up a little bit forward but still i cant finish it...i can go on twrp mode,and there it doesnt shows me any kinf of file..only on Restore i have the last rom that i tried to install...how its possible?
Az Biker said:
Here are some easy to follow steps,
All needed file, or links are also in one place.
As long as you can fastboot, you should be able to get up and running.
Good luck!
Click to expand...
Click to collapse
i follow your instructions but i have errors on cmd like:
archive does not contain 'boot.sig'
archive does not contain 'recovery.img'
archive does not contain 'system.sig'
archive does not contain 'vendor.sig'...
Edit* Also in twrp when i go to make reboot, i have the message No OS installed..
And Failed to mount "/system" (Structure needs cleaning)
Jinthegodstyle said:
thx alot eveyrone for your answers..i step up a little bit forward but still i cant finish it...i can go on twrp mode,and there it doesnt shows me any kinf of file..only on Restore i have the last rom that i tried to install...how its possible?
i follow your instructions but i have errors on cmd like:
archive does not contain 'boot.sig'
archive does not contain 'recovery.img'
archive does not contain 'system.sig'
archive does not contain 'vendor.sig'...
Edit* Also in twrp when i go to make reboot, i have the message No OS installed..
And Failed to mount "/system" (Structure needs cleaning)
Click to expand...
Click to collapse
Dude. Start from scratch. Can you get in fastboot and is your bootloader unlocked? Are you doing this all with a tool or are you manually putting in commands It's hard to tell you what to do without all the info.
Edit.... Just saw you used a tool.... I don't care for tools. because of stuff like this. The tool should have installed the adb folder on your computer. Find that folder and open it. Download the Google zip file with stock os and Unzip into your adb foldee or SDK folder . Open the file from Google. While in there open a terminal. Have phone in fastboot mode and plugged in. Type "fastboot devices"
If it shows a number, you are connected.
Now run the bat file and it should install the os
Read all the way through then reread it .
Carefully follow steps. Forget about twrp for now.
https://developers.google.com/android/images
Don't forget to open terminal as administrator
Good morning and thanx a lot to each one of you guys!!)) finally i made it.. The bug was on that tool i think so.. One other guys mentioned me to put all the contents of factory image, etc on the tool folder and from the tool application to choose the factory image and flash it.. And it worked!! I am Just saying it if somebody will have a problem with that, how to Solve it.. For today i am not gonna try to flash any rom, next Days i will give another try.. It would be mistake if i will lock again device? (Just asking to know for the future, because this message after rebooting Phone its kinda annoying) Again thx a lot everyone spending your time For my problem!!
Jinthegodstyle said:
Good morning and thanx a lot to each one of you guys!!)) finally i made it.. The bug was on that tool i think so.. One other guys mentioned me to put all the contents of factory image, etc on the tool folder and from the tool application to choose the factory image and flash it.. And it worked!! I am Just saying it if somebody will have a problem with that, how to Solve it.. For today i am not gonna try to flash any rom, next Days i will give another try.. It would be mistake if i will lock again device? (Just asking to know for the future, because this message after rebooting Phone its kinda annoying) Again thx a lot everyone spending your time For my problem!!
Click to expand...
Click to collapse
DO NOT LOCK THE BOOTLOADER!! Unless you want to return it or sell it to someone else, even than, I still wouldn't do it. The annoying message your getting is just that...an annoying message, nothing more. IGNORE IT! You'll save yourself a bunch of headaches ?
Badger50 said:
DO NOT LOCK THE BOOTLOADER!! Unless you want to return it or sell it to someone else, even than, I still wouldn't do it. The annoying message your getting is just that...an annoying message, nothing more. IGNORE IT! You'll save yourself a bunch of headaches
Click to expand...
Click to collapse
Thx for advice mate!! Finally after yesterdays adventure with my new toy,today i flashed without any issues in 5 minutes the rom i wanted and it was more easy than i imagined..you see after many xiaomi phones i was confused and couldnt imagine how easy could be on google phones..Now i wont touch nothing since evertything works preety good!! Thx again!!
CyberpodS2 said:
THIS IS A PUBLIC SERVICE ANNOUNCEMENT. People, Please stop locking your bootloader. It may or may not be this guys issue but it certainly "can" destroy your phone if your not 100% stock!!
Click to expand...
Click to collapse
when rma'ing it, one should defo go with locking bootloader though, i reckon.
xflowy said:
when rma'ing it, one should defo go with locking bootloader though, i reckon.
Click to expand...
Click to collapse
Heck no. Just do a factory reset and send it back. Unlocking the bootloader does not void your warranty ?
I always always always make sure the device boots before i ever lock the bootloader. I've read to many horror stories.
With this kind of phone, i think anyone should refrain from using any kind of so called "tool", aside from the basic adb n fastboot itself.
Badger50 said:
Heck no. Just do a factory reset and send it back. Unlocking the bootloader does not void your warranty ?
Click to expand...
Click to collapse
does this also apply to the critical unlock method or do i, at least, have to lock critical?
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
Did you contacted the assistance? Seems a bad driver or kernel problem.
zSyntex said:
Did you contacted the assistance? Seems a bad driver or kernel problem.
Click to expand...
Click to collapse
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money
persifele said:
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money
Click to expand...
Click to collapse
We couldn't provide support for the hardware, mostly because you said that you've tried to reset the device and flash the stock ROM again.
If this doesn't fix the hardware issue, the assistance is the only way.
Probably a failure batch etc.
to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful
persifele said:
to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful
Click to expand...
Click to collapse
Simply download the latest firmware from SamLoader (Bifrost) and use Odin in order to flash it.
Tell me if you couldn't flash
I tried installing the latest firmware with odin, everything went fine but nothing, touch still doesn't work, i think tomorrow i'll take it to someone to fix it.
persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong
Captain_cookie_200 said:
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong
Click to expand...
Click to collapse
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.
persifele said:
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.
Click to expand...
Click to collapse
its fine. those are normal. if the flash suceeds at last that is all that matters
Captain_cookie_200 said:
its fine. those are normal. if the flash suceeds at last that is all that matters
Click to expand...
Click to collapse
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).
persifele said:
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).
Click to expand...
Click to collapse
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.
Captain_cookie_200 said:
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.
Click to expand...
Click to collapse
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.
persifele said:
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.
Click to expand...
Click to collapse
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.
Captain_cookie_200 said:
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.
Click to expand...
Click to collapse
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.
Captain_cookie_200 said:
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.
Click to expand...
Click to collapse
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.
persifele said:
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.
Click to expand...
Click to collapse
So uh looks like you have no options left. I just want to make sure. could you list the exact methods you used to flash the fw. Along with where u got the fw from? Lets see if the fw itself is broken or something.
Also this is very unrelated and time wasting. but you could try download one ui 5 firmware. Then extract super.img from ap. unsparse it and extract vendor.img and flash it to vendor partition using twrp. Then decrypt by typing
multidisabler twice in terminal as said in my previous post. Check if maybe an older version one ui 5 firmware has this issue fixed. one ui 5's kernel boots so one ui 5 vendor should work on 5.1 as well. It may not work but worth a try. you could also try doing this with android 12 firmware if that fixes it. if you do not have a linux machine availible i'll do it for you and upload the files for both firmwares here. Otherwise if its a hardware issue get your phone replaced or try getting the screen replaced. if still nothing happens ig switching to a new phone would be the only optiion.
So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.
persifele said:
So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.
Click to expand...
Click to collapse
i use samfw mostly for my firmwares. anyways. You need a linux machine nearby. ubuntu or arch. any distro based on them would work.
first you need to unsparse the super.img
for that we use
simg2img super.img super-raw.img
then we can use lpunpack or mount it to get our vendor.
we flash it using twrp and then we run multidisabler twice like we did when we first flashed gsi.
As you said above if you could do it for me it'd be awesome because i don't have a pc with linux rn.