Related
I have attached all the files needed to do this on windows, mac, and linux at the end of this post. The creation of these apps, goes to the respective people, including Koush, JF, Infernix, and alansj.
Want to get rid of that t-mobile boot image?
Disconnect, over at Gotontheinter.net, has figured out how to do it using the new unlocked bootloader from the g1 dev phone. Below is a quote from the source. ( http://www.gotontheinter.net/node/9 )
"So you want to join the party and flash your own boot image, but its a weird undocumented format and you don't want to spend all year researching it in the source. Well, I'm here to help.
It is actually very simple. Start with an image you want to use, make sure it is 320x480 with 8bpp color. (In my examples, I'll use splash.png: PNG image data, 320 x 480, 8-bit/color RGBA, non-interlaced
Just make sure you have ImageMagick installed, and the utilities from the source build. (Specifically, rgb2565.)
$ convert -depth 8 splash.png rgb:splash.raw
# Make sure it is 460800 bytes long!
$ rgb2565 < splash.raw > splash.raw565
# Triple-check size before flashing! 307200 bytes
$ fastboot flash splash1 splash.raw565
$ fastboot reboot
Lets break it down. the convert turns it from a png (or any supported image format) into a raw 8-bits-per-color no-alpha data file. This file should be 460800 bytes - no more, no less.
Next, rgb2565 converts that file to a raw 565 16bit file (for the framebuffer on the G1.) This file is exactly 307200 bytes long - if its not, you messed up somewhere.
Finally, you use fastboot to flash the splash image and reboot. Instead of the B&W T-mobile logo, now you will see your custom splash screen. Congrats! "
Thanks to Infernix for the following extended how to:
1. find an image you like
2. edit it with your favourite editing suite and scale it to 320x480
3. after scaling it, convert the colorspace to 256 colors (8-bit)
4. Save it as a PNG without alpha channel/transparency.
5. Use the convert tool from the ImageMagick toolkit (use cygwin, or a linux box): convert -depth 8 splash.png rgb:splash.raw
6. Check that the splash.raw file is exactly 460800 bytes!
7. Compile the android tool called rgb2565 (gcc -O2 -Wall -Wno-unused-parameter -o rgb2565 to565.c)
8. Run the conversion command: rgb2565 < splash.raw > splash.raw565
9. Check that splash.raw565 is 307200 bytes. if it isn't, DO NOT FLASH IT ON YOUR PHONE. double-check your steps, something went wrong.
10. Boot your phone in SPL mode (hold camera +power).
11. After SPL shows, plug in USB connector/cord/whateva and push trackball or hit back. SPL restarts and now shows FASTBOOT.
12. If on windows, you need to install http://dl.google.com/android/android_usb_windows.zip
13. Compile android (see http://source.android.com/download) and make sure the fastboot binary (mydroid/out/host/*/bin/fastboot) is compiled (* being your OS)
14. use fastboot devices to check whether if your phone is showing up. if it isn't, try it as root (user might not have permission to access the usb device).
15. Double check that splash.raw565 is 307200 bytes. if it isn't, DO NOT FLASH IT ON YOUR PHONE.
16. Flash the splash image: fastboot flash splash1 splash.raw565
17. Reboot your phone to check: fastboot reboot
The instructions below are for users trying to flash their own boot image using windows.
The instructions below are also JF's work and not my own:
Instructions:
(note: you have to check the USB device in Computer Manager when the phone is in fastboot mode. The computer sees the phone in fastboot mode as a different device than the phone in normal mode)
Download the file and extract it in the same folder as adb. (if you don't have adb yet, it's included in the android SDK for windows. go download it!)
Take out the usb cable and boot up your phone into the SPL (back + power). You have to have the dev bootloader for this to work (white background with 3 skateboarding androids).
Plug in the usb cable, and make sure the display on the phone changes from "Serial0" to "FASTBOOT". If it doesn't, try pressing the back button.
If it asks you to install drivers, then go ahead and use the same usb drivers that you used to get adb working. You can skip the rest of the instructions. Fastboot should be working for you now.
If it doesn't ask you to install a driver, you need to figure out if the correct driver is loaded already.
Right click on My Computer, and click Manage, then go to the device manager
If you see an "ADB Interface" category at/near the top, with "HTC Dream" under it, then you're good to go. Fastboot should be working for you.
If you don't see an "ADB Interface" category, then it's likely that windows loaded the USB Mass Storage driver for it automatically. In the device manager, go down to "Universal Serial Bus Controllers", and see if you have at least one "USB Mass Storage device". If you have multiple ones, you'll need to go through each to find the correct one.
To find the correct one, right click on the USB Mass Storage device and click Properties. Go to the Details tab. In the combo box at the top that says "Device Instance Id", bring up the pull down and choose "Compatible Ids". If that is the correct device, then you will see 3 entries:
* USB\Class_ff&SubClass_42&Prot_03
* USB\Class_ff&SubClass_42
* USB\Class_ff
Once you find the correct device, go to the driver tab, and click "Update Driver". Choose "No, not this time", then "Install from a list or specific location", then "Don't search, I will choose the driver to install", and then choose the same usb driver that you used to get adb to work.
After that's done, you should be good to go. Open a command prompt and type fastboot devices and it should list the phone.
Here is a very good set of instructions for applying this to your phone if you haven't gotten it already: http://forum.xda-developers.com/showthread.php?t=467064
Additional Information
-
-
another way to convert to 565 raw, but from ANY format, is to use ffmpeg like so:
ffmpeg -i input.png -f rawvideo -pix_fmt rgb565 output.565
where input.png could be jpg, gif, tiff, etc. whatever you want.
-
-
credits for this goes to
Clone137
Heres some info about FFmpeg and where you can download it: FFmpeg
Stericson
“It won't work,” droned Marvin, “I have an exceptionally large mind.”
It's possible to modify the code to show a different startup animation: for example, the cylon strobing eye animation that was present up till Android V0.9.
Check out \frameworks\base\libs\surfaceflinger\BootAnimation.cpp. Just need to redeploy the one surfaceflinger file to see the changes.
Stericson, You ROCK!
I'm getting hung up at this line
fastboot flash splash1 g1-splash.rle
it says g1-splash.rle not found. what'd i miss? everything else has worked like a charm thus far.
Correction in instructions:
$ rgb2565 < splash.raw > splash.raw565
# Triple-check size before flashing! 307200 bytes
$ fastboot flash splash1 splash.raw565
$ fastboot reboot
Stericson said:
This file should be 460800 bytes - no more, no less.
Click to expand...
Click to collapse
460800 shall be the size of the file, and the number of bytes in the file shall be 460800. 460801 shalt not the size of the file be, neither shall the size be 460799, excepting that thou then append a byte to 460800.
460802... is right out.
Once the file size 460800, being the 460800th byte be reached, flasheth thou thy boot image onto the G1, who, being naughty in my sight, shall display it.
(note: please read the instructions, and don't actually flash a file that's 460800 bytes long. I had to take some artistic liberties here )
Ok, now the terminal just hangs on
< waiting for device >
Is the phone supposed to be in recovery? I've tried that, but have had the same results. I have the /system mounted and the phone is on a jailbroken RC30 (1.2). And it also is running the Dev 1 bootloader. Any helpful hints?
[edit]
when i do an 'adb devices', the phone is listed...
can I do this using windows? I made an image, with paint shop pro, and used convert to convert it to the raw format and it turned out to be 403,200 bytes, is that wrong? What did I do? Also, can I use rgb2565 on Windows? or do I have to run this in linux? Lastly, when using fastboot, do I boot my phone into the dev bootloader and connect to it via adb shell and then type that command?
Any help would be great!
OK let me extend the howto:
1. find an image you like
2. edit it with your favourite editing suite and scale it to 320x480
3. after scaling it, convert the colorspace to 256 colors (8-bit)
4. Save it as a PNG without alpha channel/transparency.
5. Use the convert tool from the ImageMagick toolkit (use cygwin, or a linux box): convert -depth 8 splash.png rgb:splash.raw
6. Check that the splash.raw file is exactly 460800 bytes!
7. Compile the android tool called rgb2565 (gcc -O2 -Wall -Wno-unused-parameter -o rgb2565 to565.c)
8. Run the conversion command: rgb2565 < splash.raw > splash.raw565
9. Check that splash.raw565 is 307200 bytes. if it isn't, DO NOT FLASH IT ON YOUR PHONE. double-check your steps, something went wrong.
10. Boot your phone in SPL mode (hold camera +power).
11. After SPL shows, plug in USB connector/cord/whateva and push trackball or hit back. SPL restarts and now shows FASTBOOT.
12. If on windows, you need to install http://dl.google.com/android/android_usb_windows.zip
13. Compile android (see http://source.android.com/download) and make sure the fastboot binary (mydroid/out/host/*/bin/fastboot) is compiled (* being your OS)
14. use fastboot devices to check whether if your phone is showing up. if it isn't, try it as root (user might not have permission to access the usb device).
15. Double check that splash.raw565 is 307200 bytes. if it isn't, DO NOT FLASH IT ON YOUR PHONE.
16. Flash the splash image: fastboot flash splash1 splash.raw565
17. Reboot your phone to check: fastboot reboot
This list together with instructions at http://www.gotontheinter.net/node/9 should get you going.
The tools mentioned here are commandline tools.
I have attached static versions of the tools mentioned for linux x86 to this thread. However I can't guarantee that they will work for you. they should, though.
A quick note: you can save directly to raw format from gimp or photoshop (allowing you to skip the imagemagick step). It just has to be 8-bit (which has been the default when I tried it).
Also, I attached rgb20565 and fastboot compiled for OS X 10.5.
Could someone upload the compiled binaries for Windows for those lazy people out there (me included)?
Here is the compiled binary for rgb2565
I don't have the compiled binary for fastboot, hopefully someone else will post it for you guys...I found it easier, way easier, to do this on a linux box.
After a bit of tinkering, i finally got it. The biggest problem i was having was that after i booted into the SPL, THEN i was supposed to connect the USB cable... i had it plugged in and then tried to boot SPL and nothing happened. Everything is great now. Big thanks
Thanks Stericson for the compiled rgb2565 file(for windows)
Can someone please upload the fastboot binary? I don't know how to compile it myself....Thanks a lot in advance for everyones previous hardwork on this and forthcoming.
to build the file yourself go to the root android source directory (mine is linux, but it looks like this "/home/ryan/android_source"), your's might look something like "C:/Source Codes/android/" or whatever. Once you navigate to that directory (via the command prompt... just go to start > run > and type in 'cmd' and hit enter, then use the 'cd' command to get there... e.g., "cd C:/Source Codes/android/"), once there, simply type 'make' and hit enter and it will start building everything, it might take a few minutes to complete. Then just go into the 'out' directory, then it's under "host/windows-x86/bin" (i'm not sure about the windows-x86 part, it might just be windows or something like it, i'm just assuming based on mine), once in that folder you'll have the fastboot as well as all of the other binary files ready to go. Then you can just type fastboot w/e w/e and it'll work just fine.
Here's my updated bootloader logo:
It's kind of difficult to see, my camera sucks... it's my fraternity letters with the crest in the background. Here's the image i used for it:
big head white robot guy
Id like to have the big head robot one in the first of this post, mind sharing the properly pressed,flipped,shook,stirred and what not, Id just like to dump the tmob splash, really anybody who has tried tested images attach them here, if you don't mind sharing...
just figured I'd ask as I didnt see any posted anywhere I don't always do so well at looking for stuff, at least thats what my wife is always b1tchen in my ear...
bhang
Ok, I'm sure I can do that, but now how do I get the android source onto my windows installation? Do I use cygwin? How, if so?
Thanks so much....
BTW, I've tried googling this, and still am, with no luck, thusfar.
Here's what I finally settled on.
Take 2...
Awesome, thanks for the help!
You mentioned that disconnect figured out how to do it with a dev bootloader - does this mean my rooted rc30 phone should be upgraded to a dev phone bootloader for it to work? Or will I be able to perform it on my modified rc30 v1.2 setup?
thanks
edit: nm, figured it out thanks! here's a pic:
Oliver Grawert writes in https://lists.launchpad.net/ubuntu-phone/msg06352.html
hi,
I finally managed to finish the rootstock-ng installer that can be used
for any device that has the android .img files available to perform an
ubuntu-system installation (loop mounted readonly images as you know
them from the supported devices)
There is a README.rootstock-touch-install file in the tree that roughly
describes how to perform an install, it should theoretically work with
any device that is able to run ubuntu-touch out there (including all the
ports if they are able to use a recent trusty rootfs)
This should enable more people to actually use their devices for testing
and together with the rootstock-touch script it should also enable you
to prepare one of the supported devices with a readonly image that
includes packages provided in a PPA (i.e. the long awaited Qt 5.2
testing image can be easily build now)
I'll quickly outline how to use the two scripts:
Installing a flo (Nexus7 2013) experimental image with the necessary Mir
PPA from rsalveti added:
-----
First we install the needed dependencies:
sudo apt-get install android-tools-fsutils qemu-arm-static
android-tools-adb
Now we branch the rootstock-ng tree including the scripts and move into
the direcotry:
bzr branch lproject-rootstock-ng
cd project-rootstock-ng
Here we now run the rootstock-touch script with rsalvetis PPA included
so the needed Mir packages for the flo get included:
./rootstock-touch -p pps:rsalveti/ppa
The above command will take about 90 minutes on a mildly fast internet
connection (use a package proxy like approx or apt-cacher-ng if you plan
to repeatedly do builds, see the -m option of rootstock-touch for this
use case)
Now that the script is done we need to download the android img files
from rsalveti ...
wget http://people.canonical.com/~rsalveti/aosp/flo/system.img
...
We'll do that for all three img files in that dir.
Next we need to boot the flo in fastboot (bootloader) mode by holding
down "Vol Down" while pressing the power key. Now attach it via USB and
run:
fastboot flash boot ./boot.img
fastboot flash recovery ./recovery.img
After these two commands have finished, select "recovery mode" on the
screen of the flo (using the volume keys for selection and power as
enter key)
Once the device booted into recovery we can run the installer commmand
with the tarball from the out-$(date) dir that was created by
rootstock-touch before:
./rootsotck-touch-installer ./out-20140208/ubuntu-touch.rootfs-armhf.tar.gz ./system.img
The script will print what is does (note it wipes all former
ubuntu-system installs from the device by default, use the -k option if
you had an install like this already and want to keep the data of the
phablet user in place (Music, Videos etc))
Once the device rebooted you should see Ubuntu Touch on the screen.
-----
I hope this will be helpful for porters to operate a little closer to
what the official images provide, the rootstock-touch-install script
works indeed also with ubuntu-touch tarballs downloaded from
cdimage.ubuntu.com, building one should only be done if you want to
include a PPA in the build.
Feedback is indeed appreciated
ciao
oli
Click to expand...
Click to collapse
This works only on Linux 64-bit
DISCLAIMER: It is always risky to flash your mobile device. I do not and will not take any responsibility for bootloops and bricks.
Please check carefully that the ROM or recovery.img you want to flash is suitable for your specific device and for the sp_flash_tool. The firmware directory should neither contain meta-inf nor system folder, but something_with_a_scatter.txt and a system.img
Backup your phone before flashing!
Your phone's battery should be at least half charged (50 percent) before you start this.
I successfully ran these steps on my UMI Hammer with Linux Ubuntu 14.04 and 16.04. I do not have other devices or Linux derivates and do not plan to buy/install any.
CREDITS and a zillion thanks to Sergio Rivero for his excellent tutorial on mibqyyo.com!!!!
Also many thanks to N2K1 for giving me some more background information!
So here we go:
Step 1:
If you haven't done so before, install the Linux generic usb-drivers package:
Code:
sudo apt-get update
sudo apt install libusb-dev
Download SP Flash Tool Linux (latest version): http://mtk2000.ucoz.ru/load/soft/soft_mtk/sp_flash_tool/5-1-0-14 (Password to extract currently is mtk2000v3)
or here https://androidmtk.com/smart-phone-flash-tool
In case you haven't done before, install unrar:
Code:
sudo apt install unrar
Extract the downloaded file -> graphic file manager (e.g. Nautilus): double-click and extract. Terminal:
Code:
unrar x path_to_file
(from now on: please adapt paths to your own settings)
Move the new folder „sp_flash_tool“ to a directory of your choice.
Code:
mv /home/username/Downloads/sp_flash_tool /home/username/...
You might also need to install libqtwebkit4 (it just happened to me on Linux Ubuntu 16.04):
Code:
sudo apt install libqtwebkit4
[Only For Ubuntu 16.10 and newer]
Run
Code:
dpkg -x libpng12-0_1.2.54-1ubuntu1.1_amd64.deb /tmp/libpng2
cp /tmp/libpng2/lib/x86_64-linux-gnu/libpng12.so.0.54.0 lib
cd lib
ln -s libpng12.so.0.54.0 libpng12.so.0
These libraries are still required for the flash tool but have been removed from new Ubuntu versions.
Thanks @hanalinqu, @z3r0c00l_2k https://forum.xda-developers.com/showpost.php?p=73484473&postcount=216 and @opticyclic https://forum.xda-developers.com/showpost.php?p=81543495&postcount=285 for this information!
Step 2:
Change into the newly created directory:
Code:
cd /sp_flash_tool
We make one file executable by typing:
Code:
chmod +x flash_tool
In order to avoid running the flash_tool as root user, you need to add a standard user to the usergroup "dialout" (thanks to @egalus for this bit!)
Code:
sudo adduser username dialout
For Arch Linux:
Code:
gpasswd -a username uucp
and activate the membership immediately
Code:
newgrp - dialout
(Arch Linux):
Code:
newgrp - uucp
Step 3:
Now you can open the tool:
Code:
./flash_tool
or double-click on the flash_tool icon.
You can try at this stage if the flash tool connects to your phone:
In the user interface, choose tab „Download“. Hit "scatter-loading", navigate to a directory with a valid firmware for your device and choose the scatter-file.
For testing purposes uncheck "name" and check one of the smaller files in the list below (for example "logo")
Switch off your device. Hit the "Download" button in SP_Flash_Tool and connect your phone to the computer. Some devices require you to take off the battery for about 10 seconds, with others you need to press Vol+ or Vol- while plugging the cable into the phone. Please look up device-specific threads and try out different options.
If nothing happens at all, open a second terminal, run
Code:
dmesg | grep usb
and look out for a MediaTek entry. If there is none → did you install libusb-dev (Step 1?)
If the answer is yes, you might need to create a persistent udev rule for the MTK Preloader:
Code:
sudo gedit /etc/udev/rules.d/80-persistent-usb.rules
Add the following line to the file:
Code:
SUBSYSTEM=="usb", ACTION=="add", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="*"
Save the file and exit.
Reload the usb-rules:
Code:
sudo service udev restart
Disconnect the usb data cable from the computer and the smartphone. Close the flash tool. Switch on your phone (fastboot mode will do). Repeat the first paragraph of Step 3.
If the tool connects, within a few seconds a red progress bar will appear. Unfortunately, in my case an error message came along with it:
S_BROM_CMD_JUMP_DA_FAIL (2035)
There is a connection, but also one more obstacle to overcome...
Step 4:
Now we come to the interesting part, which cost me 2 weeks of (futile) research and frustration. Finally I found Sergio Riveros tutorial on mibqyyo. Thanks to him again and again and again for this priceless piece of information
The “modemmanager” package integrated by default within Linux Ubuntu 14.04 and later is not compatible with the MTK Flash Tool for Linux
Click to expand...
Click to collapse
To put it in different words: The modem manager controls port /dev/ttyACM0 and disables the Flash Tool. So we blacklist it for the two MTK vendor IDs the flash tool uses:
Code:
sudo gedit /etc/udev/rules.d/20-mm-blacklist-mtk.rules
You insert these two lines:
Code:
ATTRS{idVendor}=="0e8d", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="6000", ENV{ID_MM_DEVICE_IGNORE}="1"
Save the file, exit and restart udev:
Code:
sudo service udev restart
Switch your phone on (fastboot mode will suffice) and off again.
Step 5:
Code:
./flash_tool
or double-click on the flash_tool icon.
Now everything should run smoothly. In case you encounter
Code:
BROM ERROR : S_SECURITY_SF_CODE_FORMAT_FORBIDDEN (6012) , MSP ERROE CODE : 0x00
change the download agent to MTK_AllInOne_DA.bin (screenshot #4)
There are plenty of tutorials on the web for the further steps.
Happy flashing! When a green circle with a white checkmark appears, you are done. You can close the flash tool and disconnect your phone. For a clean start with a new ROM boot into recovery and wipe data/factory reset.
Kudos for the udev rules, I finally managed to root my phone and disable some vendor crap thanks to you!
Thanks, I'm glad to read that it worked for you as well
Great post!
Just wanted to say you saved me HOURS OR DAYS OR WEEKS of time on the modemmanager thing. I have Arch Linux, successfully ported over this tutorial, but I had no idea the modemmanager package was causing the issue. SP Flash Tool was the last frontier for using my Android devices on Linux. Thanks so much!
You are very welcome! Since it took me two weeks to find the cause for "S_BROM_Error [2035]" I wanted to spare other "victims" the experience
This is a very nice, HQ post. Keep up the good work.
But I would like to suggest two corrections:
1) The mv command is unnecessary. you don't have to copy the folder to the root directory to run it as root.
2) Please also add a final step to delete the udev rules so as to re-enable the modem manager after rooting.
Though most of the people who would be reading your thread would be knowledgeable linux users, they won't need these suggestions, but anyways, it would make your guide complete.
Thanks for your feedback @daltonfury42
1) Of course you don't need to move to move the folder to / .As I wrote, you can also use your /home/user directory. But you shouldn't keep it in "/Downloads" or "/tmp", since you might have deleted the folder by the next time you want to use the flash-tool.
Step 2), as you suggest it, is redundant on a private computer, because you blacklist the modemmanager for the flash-tool only, and for nothing else. SP_Flash_Tool uses different Vendor and Product IDs than MTP/USB/ADB/Fastboot mode, and these IDs are not related to your specific device. So the modem manager is up and running - even while you flash - on every other active (network-relevant) usb-port of your computer And it will be up and running on the usb-port you use for the flash-tool when you disconnect the phone and then plug in something else - or the same phone in a different mode... But due to the permanent
Code:
/etc/udev/rules.d/20-mm-blacklist-mtk.rules
entry the modem manager will be automatically blocked if you connect your phone to the SP_Flash_Tool a second time - no matter which port: no further preparations necessary
If you want to check it out, take a look the output of
Code:
dmesg | grep usb
connecting your phone "normally" and compare it with the same command -> output connecting your phone to the SP_Flash_Tool - and/or to the contents of the file "usb_setting.xml" in the SP_Flash_Tool directory My udev rule simply tells the modem manager to ignore two vendor IDs named in that file.
edit: if you "flash" your linux computer more often than your Android device, you should remember to backup the folder and the udev rules
Miss Montage said:
Thanks for your feedback @daltonfury42
1) Of course you don't need to move to move the folder to / .As I wrote, you can also use your /home/user directory. But you shouldn't keep it in "/Downloads" or "/tmp", since you might have deleted the folder by the next time you want to use the flash-tool.
Step 2), as you suggest it, is redundant on a private computer, because you blacklist the modemmanager for the flash-tool only, and for nothing else. SP_Flash_Tool uses different Vendor and Product IDs than MTP/USB/ADB/Fastboot mode, and these IDs are not related to your specific device. So the modem manager is up and running - even while you flash - on every other active (network-relevant) usb-port of your computer And it will be up and running on the usb-port you use for the flash-tool when you disconnect the phone and then plug in something else - or the same phone in a different mode... But due to the permanent
Code:
/etc/udev/rules.d/20-mm-blacklist-mtk.rules
entry the modem manager will be automatically blocked if you connect your phone to the SP_Flash_Tool a second time - no matter which port: no further preparations necessary
If you want to check it out, take a look the output of
Code:
dmesg | grep usb
connecting your phone "normally" and compare it with the same command -> output connecting your phone to the SP_Flash_Tool - and/or to the contents of the file "usb_setting.xml" in the SP_Flash_Tool directory My udev rule simply tells the modem manager to ignore two vendor IDs named in that file.
edit: if you "flash" your linux computer more often than your Android device, you should remember to backup the folder and the udev rules
Click to expand...
Click to collapse
@Miss Montage, very informative. Thankyou.
You're welcome - but please do not post full quotes
Hi. Thanks for the tutorial :good:
I'm getting "PMT changed" error with the right scatter when tried to flash bootimg/recovery only.
Where did you get the scatter file? Generally this error code means that the partition table is different to the one on your device. This should only be the case - occasionally - if you flash a complete firmware.
(Or replace Android through Ubuntu / vc. vs.)
Miss Montage said:
Where did you get the scatter file? Generally this error code means that the partition table is different to the one on your device. This should only be the case - here and then - if you flash a complete firmware.
(Or replace Android through Ubuntu / vc. vs.)
Click to expand...
Click to collapse
I know this error, so I am surprised
scatter is from my stock rom. Same i used to flash.
Hmm, dunno why that is. Can you compare the scatter.txt to the /proc/emmc file on your phone?
And at what stage do you get the error? Immediately after connecting or later?
Miss Montage said:
Hmm, dunno why that is. Can you compare the scatter.txt to the /proc/emmc file on your phone?
And at what stage do you get the error? Immediately after connecting or later?
Click to expand...
Click to collapse
Right now I remembered in windows long ago got the same problem.
This happens if I try to use flash sp tool new versions
In windows:
Working: v5.1352.01
Not Working: v5.1512.00.000
Click to expand...
Click to collapse
The sp_flash_tool_linux 5.1520..... worked perfect for me though... Have you tried an earlier version?
Miss Montage said:
The sp_flash_tool_linux 5.1520..... worked perfect for me though... Have you tried an earlier version?
Click to expand...
Click to collapse
SP_Flash_Tool_Linux_v5.1452.00.100 tested, same problem.
SP_Flash_Tool_Linux_v5.1436.00.100 also tested and same.
No older versions found
The version v5.1504.00.100 works on my 64-bit-system, too... But the error seems to be caused by something else. Have you checked the SP logfile?
Have you also tried the newest version? I just involuntarily re-flashed my UMI Hammer with it... Wanted to choose the twrp only, but too much multi-tasking leads to no good
Miss Montage said:
The 32bit-version v5.1504.00.100 works on my 64-bit-system, too... But the error seems to be caused by something else. Have you checked the SP logfile?
Click to expand...
Click to collapse
Tested and same.
Here logs
Hmm, I will compare these lines to a successful log:
08/13/15 23:57:01.942 BROM_DLL[6767][6774]: FlashTool_ReadPartitionInfo(0x7f7b840038a0,0x7f7b84013310,0x7f7b00000013): mutex: LOCK ... (mutex.cpp:151)
08/13/15 23:57:01.942 BROM_DLL[6767][6774]: FlashTool_ReadPartitionInfo(0x7f7b840038a0,0x7f7b84013310,0x7f7b00000013): mutex: UNLOCK. (mutex.cpp:166)
08/13/15 23:57:01.943 BROM_DLL[6767][6774]: FlashTool_Disconnect(0x840038A0): mutex: LOCK ... (mutex.cpp:151)
Click to expand...
Click to collapse
Root your LG G4S (Model H735)
Tested on Andriod 5.1.1.
Thanks goes to @konsolen for sharing the method to open up the port (see appendix in this post) and to @dominik-p for his guide to determine dd parameters (you won't need this to root with the method described, but you can back up your phone if you're worried). And most importantly, thanks to the author of SuperSU for his excellent script updater-binary which worked pretty much out of the box, with only a few workarounds needed (which is what the instructions below do).
First, a few general notes:
The supersu.zip included in this package is version 2.46.
SuperSU can be downloaded here: http://download.chainfire.eu/supersu
If you want to use a new version, just put the zip file in this directory and rename it to "supersu.zip" (delete the old one in this package first of course).
The busybox binary in this package was used successfully to unzip in the LG G4s H735 (Android 5.1.1).
Some time it should maybe be ensured that this is the newest version. Same holds for Send_Command.exe and adb.exe (and attached libraries).
This script uses the "update-binary" script of the SuperSU package to install it on your phone.
The scripts I attached prepare for it to be called (hopefully) successfully.
Instructions to root
Preparation
You MAY want to create a backup of your system beforehand, in case things go wrong.
This is optional, so if you don't want to do this, you may still rely on the .kdz file (see Appendix below) to restore your phone if things go wrong.
You need to calculate the dd parameters and then backup your system partition into a .img file.
There is an excellent guide by @dominik-p for how to determine your individual dd parameters:
http://forum.xda-developers.com/g4/help/how-to-determine-dd-parameters-lg-g4-t3184867
Keep a copy of your system.img somewhere safe, you can use it to restore
your system if something goes wrong.
Enabling developer options and getting the tools
First, enable developer / debugging mode on your phone:
Navigate to Settings > About Phone > scroll to the bottom > tap Build number seven (7) times.
You'll get a short pop-up in the lower area of your display saying that you're now a developer.
Then, go back and now access the Developer options menu, check 'USB debugging' and click OK on the prompt.
Note: You have to enable USB debugging before plugging your device in to the computer. Unplug device then try to enable USB debugging.
On your computer, install Install and Use ADB (the Android Debug Bridge Utility). Also, download LG Flash Tool.
You can find out how to do both by searching google for it.
Step 1.
Connect your phone via USB (not in download mode yet, just normal).
Then, run Init_Root.bat in order to copy the essential files over to internal storage.
You may do this either by 1) double clicking the file, or 2) executing it from the windows command line.
For Option 2): Open a command line in the folder where you extracted this package. To do this, hold shift while right clicking in the folder opened in the Windows Explorer and select "Open command window here". Then, type
Init_Root.bat
Step 2.
Reboot your phone in download mode and ensure it has opened the port to send commands in download mode.
The port is open if it's displayed on the phone's screen in green letters, like
COMX
(with a number instead of X).
On my LG H735 it was necessary to use "LG Flash Tool 2014" http://lgflashtool.com/ to open the port. So if you don't have the green letters, see instruction pasted below (appendix) on how to open the port.
Step 3.
Open a command line in the folder where you extracted this package. To do this, hold shift while
right clicking in the folder opened in the Windows Explorer and select "Open command window here".
Open a command shell to your phone by typing (replace X with the number displayed on your phone) by typing:
Send_Command \\.\COMX
You should be set to root if the following works:
Typing "ls" returns a long list of file and folder names.
Typing "id" should give you someting like that:
uid=0(root) gid=0(root) context=u:r:recovery:s0
The important bits are the "(root)" uid and gid.
If any of the above is not the case, it will not work, you may search for help in the forum.
Step 4.
Execute the commands below (without the numbering of course).
1. mv /data/local/tmp/busybox /sbin/busybox
2. chmod 755 /sbin/busybox
3. mkdir /tmp
4. mkdir /tmp/supersu
5. /sbin/busybox unzip /data/local/tmp/supersu.zip -d /tmp/supersu
6. mv /data/local/tmp/supersu.zip /tmp/supersu/
7. sh /tmp/supersu/META-INF/com/google/android/update-binary dummy 1 /tmp/supersu/supersu.zip
(Note: Not all commands above may be needed, but this is the conservative approach)
Recommended:
Do sanity checks to see if it's doing its job as expected.
After command 2, type the command ls -l /sbin/busybox to check for sanity.
It must return a line like this (with your own date and time):
-rwxr-xr-x shell shell 1048328 <date> <time> busybox
Command 5 must print several lines containing "inflating" messages, similar to this:
Archive:
inflating: META-INF/MANIFEST.MF
...
Command 7 prints lines like this, and other status messages afterwards:
**************
SuperSU installer
**************
...
Step 5.
Your phone should now be rooted if it all worked ok.
You may now type
LEAVE
to reboot your phone.
Happy rooting!
Troubleshooting
If it doesn't work, for example you phone may be stuck on the boot process displaying the LG logo, then you can use Flash Tool to restore your phone. Use instructions below (how to boot the phone into download mode), but don't pull the USB cable, and just let it run its course. This should restore your phone.
If for some reason this hasn't worked, you may try to "dd" back your system .img which you may have created in the preparation step.
Appendix
How to boot the phone into download mode and open the port
a) Boot the LG G4s in download mode. To do this, first switch it off completely and disconnect USB cable. Then, hold the Volume Up button, and while you keep holding it, plug in the USB cable.
b) Start the LG Flash tool and load the .kdz for your phone. We won't actually complete the flashing, you only need it to start the process, but you should use the kdz for your phone nonetheless.
You can check for your kdz on this link, pasting your IMEI instead of YOUR-IMEI in the link below.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOUR-IMEI
I did not find any for mine there, but I did find it on
http://devtester.ro/projects/lg-firmwares/
Which brought me to this link where I could find mine:
http://pkg02.azure.gdms.lge.com/dn/downloader.dev?fileKey=FW703UV132GQAUP7A0ED99N/H73510c_00.kdz
c) Now this is very important: Watch your phone while the .kdz is being flashed by the flash tool.
(the flash tool may complain about error connecting to the update server, but you can ignore this with "ok").
As soon as the green letters show up, UNPLUG THE USB CABLE!
The percentage on your phone has to be 0% still (never mind about percentage in the flash tool, it may not even display it).
Then, kill the Flash Tool with the Windows Task Manager (Ctrl+alt+delete).
When it's closed, you can plug your phone back in.
It's now in download mode with open port.
You may also be interested in optimizing your storage & memory after you have rooted:
http://forum.xda-developers.com/general/general/moving-apps-to-sd-optimize-memory-phone-t3248125
LG-H731 Vigor from Videotron/Virgin Mobile
jen.magnolis said:
Root your LG G4S (Model H735)
Tested on Andriod 5.1.1.
Click to expand...
Click to collapse
Also work on phone listed in title:
LG-H731 (LG G4) Vigor from Videotron/Virgin Mobile
Happy rooting
If you need help, don't hesitate to contact me: [email protected] or here =
Hi
jen.magnolis said:
Root your LG G4S (Model H735)
Tested on Andriod 5.1.1.
Thanks goes to @konsolen for sharing the method to open up the port (see appendix in this post) and to @dominik-p for his guide to determine dd parameters (you won't need this to root with the method described, but you can back up your phone if you're worried). And most importantly, thanks to the author of SuperSU for his excellent script updater-binary which worked pretty much out of the box, with only a few workarounds needed (which is what the instructions below do).
First, a few general notes:
The supersu.zip included in this package is version 2.46.
SuperSU can be downloaded here: http://download.chainfire.eu/supersu
If you want to use a new version, just put the zip file in this directory and rename it to "supersu.zip" (delete the old one in this package first of course).
The busybox binary in this package was used successfully to unzip in the LG G4s H735 (Android 5.1.1).
Some time it should maybe be ensured that this is the newest version. Same holds for Send_Command.exe and adb.exe (and attached libraries).
This script uses the "update-binary" script of the SuperSU package to install it on your phone.
The scripts I attached prepare for it to be called (hopefully) successfully.
Instructions to root
Preparation
You MAY want to create a backup of your system beforehand, in case things go wrong.
This is optional, so if you don't want to do this, you may still rely on the .kdz file (see Appendix below) to restore your phone if things go wrong.
You need to calculate the dd parameters and then backup your system partition into a .img file.
There is an excellent guide by @dominik-p for how to determine your individual dd parameters:
http://forum.xda-developers.com/g4/help/how-to-determine-dd-parameters-lg-g4-t3184867
Keep a copy of your system.img somewhere safe, you can use it to restore
your system if something goes wrong.
Step 1.
Connect your phone via USB (not in download mode yet, just normal).
Then, run Init_Root.bat in order to copy the essential files over to internal storage.
You may do this either by 1) double clicking the file, or 2) executing it from the windows command line.
For Option 2): Open a command line in the folder where you extracted this package. To do this, hold shift while right clicking in the folder opened in the Windows Explorer and select "Open command window here". Then, type
Init_Root.bat
Step 2.
Reboot your phone in download mode and ensure it has opened the port to send commands in download mode.
The port is open if it's displayed on the phone's screen in green letters, like
COMX
(with a number instead of X).
On my LG H735 it was necessary to use "LG Flash Tool 2014" http://lgflashtool.com/ to open the port. So if you don't have the green letters, see instruction pasted below (appendix) on how to open the port.
Step 3.
Open a command line in the folder where you extracted this package. To do this, hold shift while
right clicking in the folder opened in the Windows Explorer and select "Open command window here".
Open a command shell to your phone by typing (replace X with the number displayed on your phone) by typing:
Send_Command \\.\COMX
You should be set to root if the following works:
Typing "ls" returns a long list of file and folder names.
Typing "id" should give you someting like that:
uid=0(root) gid=0(root) context=u:r:recovery:s0
The important bits are the "(root)" uid and gid.
If any of the above is not the case, it will not work, you may search for help in the forum.
Step 4.
Now you have two options:
#Step 4, Option 1 (recommended to try)
Just run the script and you should be done.
Type:
sh root_lgh735.sh
The script contains all commands I (and other people) used to successfully root the phone.
However we have all used option (2) below, so the script itself has not been tested yet,
though it's very simple (feel free to open it with a text editor to look at it).
You can try to run it, and if it's not doing what's expected you can still go to Option 2
and fix things up.
It will have worked if:
It prints several lines containing "inflating" messages, similar to this:
Archive:
inflating: META-INF/MANIFEST.MF
...
It prints 3 lines like this, and other status messages afterwards:
**************
SuperSU installer
**************
....
If it has done that, reboot your phone and you should be set.
If not, do the commands manually as in Option 2.
Please: If the script worked for you, report it in this thread, so I can simplify these instructions here! Thanks for your help :cyclops:
#Step 4, Option 2:
Execute the commands directly (proven to work on several phones).
Type the commands below (without the numbering of course).
1. mv /data/local/tmp/busybox /sbin/busybox
2. chmod 755 /sbin/busybox
3. mkdir /tmp
4. mkdir /tmp/supersu
5. /sbin/busybox unzip /data/local/tmp/supersu.zip -d /tmp/supersu
6. mv /data/local/tmp/supersu.zip /tmp/supersu/
7. sh /tmp/supersu/META-INF/com/google/android/update-binary dummy 1 /tmp/supersu/supersu.zip
(Note: Not all commands above may be needed, but this is the conservative approach)
Recommended:
Do sanity checks to see if it's doing its job as expected.
After command 2, type the command ls -l /sbin/busybox to check for sanity.
It must return a line like this (with your own date and time):
-rwxr-xr-x shell shell 1048328 <date> <time> busybox
Command 5 must print several lines containing "inflating" messages, similar to this:
Archive:
inflating: META-INF/MANIFEST.MF
...
Command 7 prints lines like this, and other status messages afterwards:
**************
SuperSU installer
**************
...
Step 5.
Your phone should now be rooted if it all worked ok.
You may now type
LEAVE
to reboot your phone.
Happy rooting!
Troubleshooting
If it doesn't work, for example you phone may be stuck on the boot process displaying the LG logo, then you can use Flash Tool to restore your phone. Use instructions below (how to boot the phone into download mode), but don't pull the USB cable, and just let it run its course. This should restore your phone.
If for some reason this hasn't worked, you may try to "dd" back your system .img which you may have created in the preparation step.
Appendix
How to boot the phone into download mode and open the port
a) Boot the LG G4s in download mode. To do this, first switch it off completely and disconnect USB cable. Then, hold the Volume Up button, and while you keep holding it, plug in the USB cable.
b) Start the LG Flash tool and load the .kdz for your phone. We won't actually complete the flashing, you only need it to start the process, but you should use the kdz for your phone nonetheless.
You can check for your kdz on this link, pasting your IMEI instead of YOUR-IMEI in the link below.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOUR-IMEI
I did not find any for mine there, but I did find it on
http://devtester.ro/projects/lg-firmwares/
Which brought me to this link where I could find mine:
http://pkg02.azure.gdms.lge.com/dn/downloader.dev?fileKey=FW703UV132GQAUP7A0ED99N/H73510c_00.kdz
c) Now this is very important: Watch your phone while the .kdz is being flashed by the flash tool.
(the flash tool may complain about error connecting to the update server, but you can ignore this with "ok").
As soon as the green letters show up, UNPLUG THE USB CABLE!
The percentage on your phone has to be 0% still (never mind about percentage in the flash tool, it may not even display it).
Then, kill the Flash Tool with the Windows Task Manager (Ctrl+alt+delete).
When it's closed, you can plug your phone back in.
It's now in download mode with open port.
Click to expand...
Click to collapse
Have twpr or cwm recovery to install xposed??
I can confirm is working on LG G4 LG-H735P (Latin America version), thanks!
anyone tried updating? just got a system update notification from my phone lol dk if i should update now or not
Good question! I didn't try it yet. Think it should be ok, but if it isn't, you can just root again I guess
jen.magnolis said:
Good question! I didn't try it yet. Think it should be ok, but if it isn't, you can just root again I guess
Click to expand...
Click to collapse
oh.. it wont like brick or anything? :/
dclarkg said:
I can confirm is working on LG G4 LG-H735P (Latin America version), thanks!
Click to expand...
Click to collapse
I could not root my phone, what kdz file did you use??
Backup problems
Hello,
Coming from a Nexus 4, I bought a G4S last month.
I want to do my first root in order to manage the storage, like jen.magnolis talked about.
In case of a problem (bootloop or brick), I need to be able to restore. I don't really mind about restoring my datas, a factory reset would be enough.
But I don't undestand how i can get the system.img without being rooted ? It seems that I can get a "backup.ab" file using adb. Will it be enough to restore in case of brick ?
I also looked about kdz files, but mine doesn't seem to be available. I have a LGH735 (buyer = FRA, suffix = AFRATS, ...). Will it work if I use the one you provided in your post ?
Thanks for your help !
dclarkg said:
I can confirm is working on LG G4 LG-H735P (Latin America version), thanks!
Click to expand...
Click to collapse
I got the same model phone, but I can't find the .KDZ file for it anywhere. Could you post a link to the one you used please?
Excellent step-by-step guide. Should set an example for other "step-by-step guides" which exclude crucial information ("everybody knows lösfhgaeilurhg has to by typed between these steps here, I shall not mention it" )
Thanks a ton Worked on my LG G4S a.k.a H735 like a charm.
Cheers!
dreamnoob said:
anyone tried updating? just got a system update notification from my phone lol dk if i should update now or not
Click to expand...
Click to collapse
jen.magnolis said:
Good question! I didn't try it yet. Think it should be ok, but if it isn't, you can just root again I guess
Click to expand...
Click to collapse
"phone appears to be rooted, will not be updated" - Hiding root did not help, any simple suggestions but total unrooting?
Wanted to upgrade from 10c to 10d...
Cheers!
Doubts.
Hi everyone!
I just cant find my .kdz file! The phone i want to root its a G4 H735AR, im wondering if there are some compatible .kdz that i can use. Im affraid it might get bricked or something...
BTW i¨ve tried the rootworm.bat method and it didnt work. And when i try to open the COMX port, the lg flash tool always crushes and shuts down.
Works!
ascfzz said:
Hi everyone!
I just cant find my .kdz file! The phone i want to root its a G4 H735AR, im wondering if there are some compatible .kdz that i can use. Im affraid it might get bricked or something...
BTW i¨ve tried the rootworm.bat method and it didnt work. And when i try to open the COMX port, the lg flash tool always crushes and shuts down.
Click to expand...
Click to collapse
So, i made it! It works in the H735AR!! The problem with the flash tool was that i was trying to use it without any KDZ file!! I've used @konsolen .kdz and achieved to open ports, and then continue with the rest of the tutorial without trouble.
Thank you so much! Its a great phone, but with so little internal memory is a waste.
chw9999 said:
"phone appears to be rooted, will not be updated" - Hiding root did not help, any simple suggestions but total unrooting?
Wanted to upgrade from 10c to 10d...
Cheers!
Click to expand...
Click to collapse
ya u just update thru lg bridge.. once updated it will be unroot tho so u have to root it back same method as u did before.. and if you use link2sd it dosent matter after root ur link2sd can just reboot and re-read ur partition without needing to wipe and re-partition
It's working in H736P! Thank you só much!
Enviado de meu LG-H736 usando Tapatalk
For people in Brazil that has H736P, to open ports, is necessary the kdz file to use in LG Flash Tool.
Galera do Brasil, consegui rootear o LG G4 Beat usando esse tutorial porém tive que baixar o arquivo kdz pro H736P pra executar o LG Flash Tool. Cuidado ao usar o LG Flash Tool, assim que aparecer a porta COM na tela do telefone, arranca o cabo USB do computador.
Enviado de meu LG-H736 usando Tapatalk
friend you are from argentina?¿
maxiret said:
friend you are from argentina?¿
Click to expand...
Click to collapse
Brasil.
Enviado de meu LG-H736 usando Tapatalk
Hi guys, following the recent release of a Windows 10 ARM32 install tutorial in Chinese to install it on the Surface RT 1 and Surface RT 2, I've decided to come and try my luck by using google translate to follow the procedure and then decided to refine it and to make it into this tutorial for the Surface 2 (The procedure for the Surface 1 should not be much different aside from the files you have to use but as I don't have one, I haven't tried out the files for it...).
Download: https://yadi.sk/d/mnCUeGKWm1XTXA
Requires:
- The files available in the Yandex Repo
- A recovery USB Disk for Surface 2: Surface2_BMR_20.2.19.0.zip (https://support.microsoft.com/en-hk/help/4023512/surface-creating-and-using-a-usb-recovery-drive)
- A keyboard
1. Copy the following files from the yandex repo to the root directory of your recovery disk:
- Disabling_UAC.reg
- SecureBootPatch.zip (extract it)
- APPX1.rar (extract it)
- surface2_win10_zh_cn_new.wim
- Microsoft.NET.Native.Framework.1.1.appx
- Microsoft.NET.Native.Runtime.1.1.appx
- Camera_fix.reg
2. Boot into Recovery mode (insert the recovery disk, hold the "vol dow" button then press the "power" button and release the "vol down" button when the surface logo appears)
Open a command prompt and type the following commands:
- diskpart
- list disk
- sel disk 0
- list part
- sel part 4
- for quick fs = ntfs override
- exit
- dism /apply-image /imagefile:d:\sources\install.wim /applydir:c: /index:1
3. Reboot the device and Disable UAC, then run "Disabling_UAC.reg" as admin and reboot the device once again
Once the device has rebooted open regedit and go to "HKEY_LOCAL_MACHINE\BCD00000000" select "BCD00000000", click on file and select "unload hive"
Once this is done extract "SecureBootPatch.zip" and open the "SecureBootPatch" folder to run "InstallPolicy.cmd" as admin and then reboot the device once again (l If the secure boot debug policy interface appears after restarting, it means normal. Select accept and install to install)
Open a command prompt as admin and enter the following command to enable test mode :
- bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on
4. Now we can start serious business and install Windows 10 on the device, to do so, we'll start by rebooting the device in recovery mode (Check the lower right corner to indicate that secureboot is not configured correctly and it will succeed)
Once in recovery mode open a command prompt and type the following commands:
- diskpart
- list disk
- sel disk 0
- list part
- sel part 4
- for quick fs = ntfs override
- exit
- dism /apply-image /imagefile:d:\surface2_win10_zh_cn_new.wim /applydir:c: /index:1
5. Plugin your keyboard and reboot the device, you should get an error message related to the boot configuration, at this moment press shift+f10 and open regedit
Go to the following registry entry: HKEY_Local machine/SYSTEM/Setup/Status/ChildCompletion and then select the "setup.exe" entry, modify it to "3", exit regedit and commandline and click "Ok" on the error dialog box, the device should reboot(don't reboot the device in any other way), and configure correctly now
Configure the system the way you want it
Once on the desktop open a powershell command prompt and type in the following commands:
- slmgr.vbs /upk
- slmgr /ipk NPPR9-FWDCX-D2C8J-H872K-2YT43
- slmgr /skms kms.03k.org
- slmgr /ato
- slmgr /skms zhang.yt
Your device is now activated
6. We must then proceed to install the runtime environment and store app
Select the APPX1 folder and copy it to the Desktop, open it and select "APPX.ps1",and choose "Run with powershell", once done press "enter" reboot the system, go back to where you were and do the same with "AppxBundle.ps1"
Then Select "Microsoft.windowsStore.appxbundle" and install it (this will install a chinese version of the Microsoft Store (better than nothing I guess? Maybe someone can provide and english version?)
Finally install the following files from the root of your recovery disk:
- Microsoft.NET.Native.Framework.1.1.appx
- Microsoft.NET.Native.Runtime.1.1.appx
7. Now all we need is a few tweaks to remove usability quirks and then your device will work like a shine :
7.1. You might have noticed than when you boot your device you get a message telling you that the licence is about to expire and that you also get a paging file error popping up at every login, this kinda ruins the experience, so we're gonna get rid of those.
- To remove the licensing popup first it go to " C:\Windows\System32" and take ownership of "LicensingUI.exe", then rename it to "LicensingUI-old.exe"
- To remove the paging file popup just manually set the page cache to 16 MB min and 512 MB max.
(Thanks to betanu701 for indicating us these tricks)
7.2. We're also gonna get totally rid of the Chinese language pack to favor any language you might want, this will also change the Store language to whatever language pack you put in.
- Go to Settings>Time & language>Region & language, and then set the whatever language pack you want as the default and remove the Chinese one (that's of course if you don't speak Chinese ^^)
(Thanks to ShotSkydiver for this trick)
7.3. We'll also make the camera work simply by applying the "Camera_fix.reg" registry entry as admin.
Your device is now ready to use.
Bonus: You can download and install the following apps from our fellow community member _CNR_, you'll get a bunch of stock apps that'll work for this build like mail, maps, solitaire...etc and Office 2013, here's the link : https://mega.nz/#F!ivwlHKaZ!hFwEHZnyw_nNTe4b3TN4wA
Quirks: at the moment I am getting a paging file error at every login along with an expired version warning, if anyone knows how to get rid of those two things, that'd be very helpful, I'd update the tutorial and mention your help in here of course...
(Edit: the quirks have been ironed out thanks to fellow community members)
I think this is only the beginning, we can probably improve this, first of all, we need an english store app (done), we'll also need to get rid of the error and warnings at every bootup(done), then we'll need to compile some apps and update existing ones and then list them, I hope the community on this forum will be helpful for these tasks :angel: For the time being enjoy what you get
Will this work in Asus winRT?
Enviado desde mi G8441 mediante Tapatalk
notass said:
Will this work in Asus winRT?
Enviado desde mi G8441 mediante Tapatalk
Click to expand...
Click to collapse
No, there are two images available, one made for the Surface 1 and one for the Surface 2, maybe it could work if you make a custom image from the leaked build but certainly not that way...
Hey !
I do have a problem with the "bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on" step... it don't work for me I don't understand why..
Are there any difference in the procedure for the Surface RT, other then using the corresponding W10 image?
Kiba85 said:
Are there any difference in the procedure for the Surface RT, other then using the corresponding W10 image?
Click to expand...
Click to collapse
No difference, if you try, tell me if you can install the secure boot patch and if the command "bcdedit ....." works for you. Because i'm stuck at this step
First off, thanks for the guide; it worked perfectly for my Surface 2! Also, I stumbled across a simple way to get the Store to display in English rather than Chinese: just go into Settings, then Time & language, then Region & language, and then set the English language pack as the default (optionally you can also remove the Chinese language pack as well). From there, open the Store, and it'll be in English!
AlGaib said:
Once this is done extract "SecureBootPatch.zip" and open the "SecureBootPatch" folder to run "InstallPolicy.cmd" as admin and then reboot the device once again (l If the secure boot debug policy interface appears after restarting, it means normal. Select accept and install to install)
Open a command prompt as admin and enter the following command to enable test mode :
- bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on
Now we can start serious business and install Windows 10 on the device, to do so, we'll start by rebooting the device in recovery mode (Check the lower right corner to indicate that secureboot is not configured correctly and it will succeed)
Click to expand...
Click to collapse
I would like to give a little warning to people following this guide - don't try to see what happens if you flash the Win10 WIM without having secure boot disabled. I just did that, and my Surface 2 is now bricked. If you want to be super sure that SecureBoot is off, run this cmdlet in PowerShell: Confirm-SecureBootUEFI
If it returns True, SecureBoot is still enabled.
I have an official Windows RT 8.1 recovery stick from Microsoft (but I also tried to make my own stick from the provided ZIP), but when I try to boot into Recovery (Volume Down + Power), I get the following error:
"A required device isn't connected or can't be accessed.
Error code: 0xc000000f"
When I just turn on the Surface, the boot fails, because the Windows 10 installation I flashed fails the SecureBoot test:
"The digital signature for this file couldn't be verified.
File:\Windows\system32\winload.efi
Error code: 0xc0000428"
Bloody hell, I was looking forward to having a more functional Surface and I ended up with a bricked one. Not sure what else can be done, when it refuses to boot even from official recovery stick :crying:
AlGaib said:
Following the recent release of a Windows 10 ARM32 install tutorial in chinese, I've used google translate to follow the procedure and then refined it, here is my tutorial for the Surface 2...
Download: https://yadi.sk/d/mnCUeGKWm1XTXA
Requires:
- The files available in the Yandex Repo
- A recovery USB Disk for Surface 2: Surface2_BMR_20.2.19.0.zip (https://support.microsoft.com/en-hk/help/4023512/surface-creating-and-using-a-usb-recovery-drive)
- A keyboard
Copy the following files from the yandex repo to the root directory of your recovery disk:
- Disabling_UAC.reg
- SecureBootPatch.zip (extract it)
- APPX1.rar (extract it)
- surface2_win10_zh_cn_new.wim
- Microsoft.NET.Native.Framework.1.1.appx
- Microsoft.NET.Native.Runtime.1.1.appx
Boot into Recovery mode (insert the recovery disk, hold the "vol dow" button then press the "power" button and release the "vol down" button when the surface logo appears)
Open a command prompt and type the following commands:
- diskpart
- list disk
- sel disk 0
- list part
- sel part 4
- for quick fs = ntfs override
- exit
- dism /apply-image /imagefile:d:\sources\install.wim /applydir:c: /index:1
Reboot the device and Disable UAC, then run "Disabling_UAC.reg" as admin and reboot the device once again
Once the device has rebooted open regedit and go to "HKEY_LOCAL_MACHINE\BCD00000000" select "BCD00000000", click on file and select "unload hive"
Once this is done extract "SecureBootPatch.zip" and open the "SecureBootPatch" folder to run "InstallPolicy.cmd" as admin and then reboot the device once again (l If the secure boot debug policy interface appears after restarting, it means normal. Select accept and install to install)
Open a command prompt as admin and enter the following command to enable test mode :
- bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on
Now we can start serious business and install Windows 10 on the device, to do so, we'll start by rebooting the device in recovery mode (Check the lower right corner to indicate that secureboot is not configured correctly and it will succeed)
Once in recovery mode open a command prompt and type the following commands:
- diskpart
- list disk
- sel disk 0
- list part
- sel part 4
- for quick fs = ntfs override
- exit
- dism /apply-image /imagefile:d:\surface2_win10_zh_cn_new.wim /applydir:c: /index:1
Plugin your keyboard and reboot the device, you should get an error message related to the boot configuration, at this moment press shift+f10 and open regedit
Go to the following registry entry: HKEY_Local machine/SYSTEM/Setup/Status/ChildCompletion and then select the "setup.exe" entry, modify it to "3", exit regedit and commandline and click "Ok" on the error dialog box, the device should reboot(don't reboot the device in any other way), and configure correctly now
Configure the system the way you want it
Once on the desktop open a powershell command prompt and type in the following commands:
- slmgr.vbs /upk
- slmgr /ipk NPPR9-FWDCX-D2C8J-H872K-2YT43
- slmgr /skms kms.03k.org
- slmgr /ato
- slmgr /skms zhang.yt
Your device is now activated
We must then proceed to install the runtime environment and store app
Select the APPX1 folder and copy it to the Desktop, open it and select "APPX.ps1",and choose "Run with powershell", once done press "enter" reboot the system, go back to where you were and do the same with "AppxBundle.ps1"
Then Select "Microsoft.windowsStore.appxbundle" and install it (this will install a chinese version of the Microsoft Store (better than nothing I guess? Mybae someone can provide and english version?)
Finally install the following files from the root of your recovery disk:
- Microsoft.NET.Native.Framework.1.1.appx
- Microsoft.NET.Native.Runtime.1.1.appx
Your device is now ready to use.
Quirks : at the moment I getting a paging file error at every login along with an expired version warning, if anyone knows how to get rid of those two things, that'd be very helpful, I'd update the tutorial and mention your help in here of course...
I think this is only the beginning, we can probably improve this, first of all, we need an english store app, we'll also need to get rid of the error and warnings at every bootup, then we'll need to compile some apps and update existing ones and then list them, I hope the community on this forum will be helpful for these tasks :angel: For the time being enjoy what you get
Click to expand...
Click to collapse
To get the Store in english: Start > Settings > Language > Region & Language > Remove chinese
To get rid of the popup (old Windows version): C:\Windows\System32\LogonUI.exe > Right Click > Properties > Security > Advanced > Owner...Change > Add your username > Check Names. Close all popups and rename the file to whatever you want
Do i have to Downgrade to 8.0?
I have a problem. I cant disable Secure Boot. Therefore this command doesn't work:
bcdedit /set {default} testsigning on && bcdedit /set {bootmgr} testsigning on
I already launched SecureBootPatch 100 times. I get the screen on boot where I need to press Agree.
I completely restored with USB recovery Windows 8 RT. Non success
this doesn't change anything. Secureboot stays on.
Avonlady said:
I would like to give a little warning to people following this guide - don't try to see what happens if you flash the Win10 WIM without having secure boot disabled. I just did that, and my Surface 2 is now bricked. If you want to be super sure that SecureBoot is off, run this cmdlet in PowerShell: Confirm-SecureBootUEFI
If it returns True, SecureBoot is still enabled.
I have an official Windows RT 8.1 recovery stick from Microsoft (but I also tried to make my own stick from the provided ZIP), but when I try to boot into Recovery (Volume Down + Power), I get the following error:
"A required device isn't connected or can't be accessed.
Error code: 0xc000000f"
When I just turn on the Surface, the boot fails, because the Windows 10 installation I flashed fails the SecureBoot test:
"The digital signature for this file couldn't be verified.
File:\Windows\system32\winload.efi
Error code: 0xc0000428"
Bloody hell, I was looking forward to having a more functional Surface and I ended up with a bricked one. Not sure what else can be done, when it refuses to boot even from official recovery stick :crying:
Click to expand...
Click to collapse
Hmmm... are the flash drives formatted to Fat32? I don’t really understand how applying an image could cause this much damage...
Do you get any options when you try to boot into 10? If you can find a way to get to the command line, you can restore a Windows RT image from the restore disk
Evandarkfire said:
I don’t really understand how applying an image could cause this much damage...
Click to expand...
Click to collapse
It's quite simple, really. The sole purpose of SecureBoot is to prevent booting of non-signed operating systems. Like this leaked Windows 10. And since I removed the recovery partition (containing command prompt, etc.), the device is now toast. And yes, the recovery sticks are FAT32.
Avonlady said:
It's quite simple, really. The sole purpose of SecureBoot is to prevent booting of non-signed operating systems. Like this leaked Windows 10. And since I removed the recovery partition (containing command prompt, etc.), the device is now toast. And yes, the recovery sticks are FAT32.
Click to expand...
Click to collapse
Are you sure you booted from usb stick? You should still be able to boot from usb. I broke my efs partition, but could still boot from usb stick and recover everything.
I have to ask and I'm sorry for sounding like a noob..... but will this tutorial work for a Microsoft surface 2 running 8.1rt? I saw theres another post that says windows rt but I'm confused...... also when one of the requirements is a keyboard does that mean a USB keyboard or can the type keyboard work?
Fix quirks
Quirks : at the moment I getting a paging file error at every login along with an expired version warning, if anyone knows how to get rid of those two things, that'd be very helpful, I'd update the tutorial and mention your help in here of course...
Click to expand...
Click to collapse
To solve the 2 quirks. For the page caching. Manually set the page cache to min 16 MB and max 512 MB.
For the Build is about the expire. Go to C:\Windows\System32. Find the file LicensingUI.exe. Take complete ownership. Then rename it to LicensingUI-old.exe (or anything).
That will prevent the popups from showing up
Anybody have a working adblocker for the included version of Edge? Also does anybody where to get one of the old UWP arm32 versions of Kodi? They've all been removed from the official servers. Other than that it's amazing, so much better than 8.1!
Avonlady said:
I would like to give a little warning to people following this guide - don't try to see what happens if you flash the Win10 WIM without having secure boot disabled. I just did that, and my Surface 2 is now bricked. If you want to be super sure that SecureBoot is off, run this cmdlet in PowerShell: Confirm-SecureBootUEFI
If it returns True, SecureBoot is still enabled.
I have an official Windows RT 8.1 recovery stick from Microsoft (but I also tried to make my own stick from the provided ZIP), but when I try to boot into Recovery (Volume Down + Power), I get the following error:
"A required device isn't connected or can't be accessed.
Error code: 0xc000000f"
When I just turn on the Surface, the boot fails, because the Windows 10 installation I flashed fails the SecureBoot test:
"The digital signature for this file couldn't be verified.
File:\Windows\system32\winload.efi
Error code: 0xc0000428"
Bloody hell, I was looking forward to having a more functional Surface and I ended up with a bricked one. Not sure what else can be done, when it refuses to boot even from official recovery stick :crying:
Click to expand...
Click to collapse
When I first attempted to flash win10 on my device I did not follow completely the chinese tutorial and therefore I had not disabled secureboot, the Tablet wouldn't boot but I could easily just reflash win8.1 from a recovery drive, your issue sure sounds weird my friend... I'm sadly not knowledgeable enough to help you solve this
Cnnrduncan said:
Anybody have a working adblocker for the included version of Edge? Also does anybody where to get one of the old UWP arm32 versions of Kodi? They've all been removed from the official servers. Other than that it's amazing, so much better than 8.1!
Click to expand...
Click to collapse
I'd love to find a working adblocker too, I really don't understand why ublock won't work, this kindof thing should be platform agnostic, how weird... Also we need to start a thread with a collection of usable software...
Edit: I've updated the tutorial and thanked the users who indicated us how to iron the quirks out, Win10 ARM32 bits on the surface 2 is now as usable as it can get, we just need to make a collection of useful apps and list them (find some and compile others) and everything will be as great as it can be...
Will this work if my surface 2 is running 8.1rt?
---------- Post added at 03:00 AM ---------- Previous post was at 02:57 AM ----------
AlGaib said:
When I first attempted to flash win10 on my device I did not follow completely the chinese tutorial and therefore I had not disabled secureboot, the Tablet wouldn't boot but I could easily just reflash win8.1 from a recovery drive, your issue sure sounds weird my friend... I'm sadly not knowledgeable enough to help you solve this
I'd love to find a working adblocker too, I really don't understand why ublock won't work, this kindof thing should be platform agnostic, how weird... Also we need to start a thread with a collection of usable software...
Edit: I've updated the tutorial and thanked the users who indicated us how to iron the quirks out, Win10 ARM32 bits on the surface 2 is now as usable as it can get, we just need to make a collection of useful apps and list them (find some and compile others) and everything will be as great as it can be...
Click to expand...
Click to collapse
Would there. E any possible way of making a video tutorial????
---------- Post added at 03:01 AM ---------- Previous post was at 03:00 AM ----------
AlGaib said:
When I first attempted to flash win10 on my device I did not follow completely the chinese tutorial and therefore I had not disabled secureboot, the Tablet wouldn't boot but I could easily just reflash win8.1 from a recovery drive, your issue sure sounds weird my friend... I'm sadly not knowledgeable enough to help you solve this
I'd love to find a working adblocker too, I really don't understand why ublock won't work, this kindof thing should be platform agnostic, how weird... Also we need to start a thread with a collection of usable software...
Edit: I've updated the tutorial and thanked the users who indicated us how to iron the quirks out, Win10 ARM32 bits on the surface 2 is now as usable as it can get, we just need to make a collection of useful apps and list them (find some and compile others) and everything will be as great as it can be...
Click to expand...
Click to collapse
Would there. E any possible way of making a video tutorial????
trollingwhovian said:
Will this work if my surface 2 is running 8.1rt?
---------- Post added at 03:00 AM ---------- Previous post was at 02:57 AM ----------
Would there. E any possible way of making a video tutorial????
---------- Post added at 03:01 AM ---------- Previous post was at 03:00 AM ----------
Would there. E any possible way of making a video tutorial????
Click to expand...
Click to collapse
I don't have time or the ressources to do that, sorry, also I don't wanna redo the whole thing again on my device just to make a video tutorial, the text one is good enough...