Hello at all
I use a Samsung Galaxy S7 Edge with LineageOS 14.1 nightly.
All works fine. But when i connect the phone with my fm-bluetooth-transmitter in my car and made calls or received calls, i'd a scratching noise in my carspeakers. I can't understand anything from the call.
Now my question: Is there anybody, who use a rom that works with any fm-bluetooth-car-transmitter?
Regards for helping.
Update!!!
Now i use a ported samsung-rom until LOS is getting a fix for the issue.
Lineage 16+ works for making calls
CBluebaer said:
Hello at all
I use a Samsung Galaxy S7 Edge with LineageOS 14.1 nightly.
All works fine. But when i connect the phone with my fm-bluetooth-transmitter in my car and made calls or received calls, i'd a scratching noise in my carspeakers. I can't understand anything from the call.
Now my question: Is there anybody, who use a rom that works with any fm-bluetooth-car-transmitter?
Regards for helping.
Update!!!
Now i use a ported samsung-rom until LOS is getting a fix for the issue.
Click to expand...
Click to collapse
Aloha,
I was going to try 17, but the Gapps aren't up to date yet as of 3 days ago. But Lineage OS 16 lets you connect and make calls without the scratchy noise, but for music it says your device is locked. I am in the process of trying to figure out if it is the privacy guard or what.
Related
Hey everyone,
I am happily using the following on my N7100:
Agni Kernel 4.3.7
UNOFFICIAL CM 12 build (15.12.2015 release)
I came from using the nightly CM11 builds with the applicable Agni kernel and used that up to 3 weeks ago. I encountered an issue however which made me take the step from CM 11 to CM 12 and it is as follows:
Whenever I connect my car/headset/whatever to my phone via BT, the connection is perfectly fine. Listening to music works like a charm so nothing wrong there. However, whenever I receive or place a call and the phone is about to connect, the network completely vanishes. I get an error that I am out of the service area and it takes a good 5 minutes at least (with BT still connected) to get reconnected to my cellular network. Whenever I turn BT off, the network comes back in a few seconds.
I tried using the standard kernel to no avail. Normal calling (i.e without BT connected) works fine. It seems to be specific with BT connected and making a call or receiving one. Having BT turned on (no connection) and placing or receiving a call works perfectly fine as well. What can I try to resolve this or better yet; does anyone else have these issues? Could this be a hardware failure? What I can try or have tried thus far for troubleshooting:
Tried:
1. Dirty flash from CM 11 to CM 12 --> nope
2. Clean wipe and install to CM 12--> nope
3. ( I read this somewhere else) Turned on 'only connect to 2G networks'. I seem to be able to get a call *sometimes*, but the call drops midway or is garbled with high pitched noises
4. Turned off Data Connection completely whilst BT is connected to make a call --> nope
Can try:
1. Revert to stock ROM to exclude issues with CM ROMS (this does mean going back to 4.4.4/4.4.2 sadly )
2. Try another Lollipop ROM as opposed to the one from Ivan_Meler (Clicky)
3. ????????
I did look at the forums here and everywhere else I could think off on the net/Google but I did not find anything really close to what I am seeing. Unless my Google-fu has failed me for which you have my sincerest apologies
Cheers!
Notna_01 said:
Hey everyone,
I am happily using the following on my N7100:
Agni Kernel 4.3.7
UNOFFICIAL CM 12 build (15.12.2015 release)
I came from using the nightly CM11 builds with the applicable Agni kernel and used that up to 3 weeks ago. I encountered an issue however which made me take the step from CM 11 to CM 12 and it is as follows:
Whenever I connect my car/headset/whatever to my phone via BT, the connection is perfectly fine. Listening to music works like a charm so nothing wrong there. However, whenever I receive or place a call and the phone is about to connect, the network completely vanishes. I get an error that I am out of the service area and it takes a good 5 minutes at least (with BT still connected) to get reconnected to my cellular network. Whenever I turn BT off, the network comes back in a few seconds.
I tried using the standard kernel to no avail. Normal calling (i.e without BT connected) works fine. It seems to be specific with BT connected and making a call or receiving one. Having BT turned on (no connection) and placing or receiving a call works perfectly fine as well. What can I try to resolve this or better yet; does anyone else have these issues? Could this be a hardware failure? What I can try or have tried thus far for troubleshooting:
Tried:
1. Dirty flash from CM 11 to CM 12 --> nope
2. Clean wipe and install to CM 12--> nope
3. ( I read this somewhere else) Turned on 'only connect to 2G networks'. I seem to be able to get a call *sometimes*, but the call drops midway or is garbled with high pitched noises
4. Turned off Data Connection completely whilst BT is connected to make a call --> nope
Can try:
1. Revert to stock ROM to exclude issues with CM ROMS (this does mean going back to 4.4.4/4.4.2 sadly )
2. Try another Lollipop ROM as opposed to the one from Ivan_Meler (Clicky)
3. ????????
I did look at the forums here and everywhere else I could think off on the net/Google but I did not find anything really close to what I am seeing. Unless my Google-fu has failed me for which you have my sincerest apologies
Cheers!
Click to expand...
Click to collapse
I have the same problem sometimes. On a Bluetooth call, network signal drops and call is ended or a loud distortion and call is dropped. I had this on RR ROM cm12 and now on cyanogen mod x rom to. This is a cm12 bug as far as I know.
Its odd that this only occurs sometimes. Its not the modem that is causing it, it is a cm12 bug
JezzeB said:
I have the same problem sometimes. On a Bluetooth call, network signal drops and call is ended or a loud distortion and call is dropped. I had this on RR ROM cm12 and now on cyanogen mod x rom to. This is a cm12 bug as far as I know.
Its odd that this only occurs sometimes. Its not the modem that is causing it, it is a cm12 bug
Click to expand...
Click to collapse
I have the same problem. No matter if i connect to the car/headset bluetooth, I cannot make a call. Actually, the phone at the other end rings once and meanwhile my phone says "Cellular network not available". However, without BT I have no network error.
Still issues on handsfree loosing connection
silviuk said:
I have the same problem. No matter if i connect to the car/headset bluetooth, I cannot make a call. Actually, the phone at the other end rings once and meanwhile my phone says "Cellular network not available". However, without BT I have no network error.
Click to expand...
Click to collapse
I'm, also having this problem. I saw once a recommendation to replace radio or modem, can't remember which.
Anybody got any knowledge in this direction?
Possibly pointing in the direction of a flashable modem or radio???
Please help! I can't stand having to rely on stock or custom TW.
amunarjoh said:
I'm, also having this problem. I saw once a recommendation to replace radio or modem, can't remember which.
Anybody got any knowledge in this direction?
Possibly pointing in the direction of a flashable modem or radio???
Click to expand...
Click to collapse
I did flash the latest modem available for my region (Europe) - UFOA1, but same behavior. Something did improve when I switched from 5.0 to 5.1, though: I can, sometimes, successfully receive phone calls via bluetooth, from ringing until hanging up. But still not able to call from my phone.
Bluetooth car audio issues on CM11 and 12
I got the same issue with the dropped 3g when calling from car audio.
No connection
CM isn't reliable so I m back to touch wizz where it still works.
Tired of not getting newer android updates.
Waiting for the new nexus to arrive. Hopefully soon
No more Sammy!
I recently decided to install CM on my Galaxy Tab S 8.4 LTE. The first build that I flashed was the cm-12.1-20150411-UNOFFICIAL-klimtlte. Really love the ROM. Everything went smooth but the mic did not work ( same for everyone who used this build). But I can still call or receive calls in this build but only for a few days and after that I can no longer receive or make any calls. Any help? Thanks in advance.
Edit - Not sure how but suddenly my phone is starting to receive calls. The mic dont work during calls only.
I installed CM12.1 on my d851 and I cannot disconnect calls. I tap the red button to hang up and the phone app hangs on "hanging up" but does not actually disconnect. Has anyone successfully gotten the CM12.1 dialer to work on the T-Mobile G3?
I have the same issue when I install other custom roms based on CM.
Any help would be appreciated.
Re: dialer will not hang up
Hi,
Did you ever work this out as I'm also having issues with CM
12.1 not hanging up on galaxy s3 Verizon.
Thanks
David
Having the same issue as well 2 i605 on cm 12.1 just switched from rip off VZW to T-Mobile and this bug started. Phones worked fine on Verizon... Can someone please get this fixed?
i don't have a solution for cm12.1 but maybe if i share the (quick) solution that was used in cm11, some smart person here can figure it out--hopefully, once and for all.
in cm11, all you had to do was add a single character to a field in build.prop, which was something like:
ro.telephony.ril.v3=newDriverCall
to get:
ro.telephony.ril.v3=newDriverCallU
in cm12.1, the rom is presumably already shipped with the correct settings:
ro.telephony.ril.config=newDriverCallU,newDialCode
but does not work (for those of us using sph-720, especially). someone who understands android can maybe port the old (and simple) fix to the new one(?)
also, i appreciate the work guys do to get us these builds, but it'd be nice not to reintroduce big issues like these as it basically forces a potential user not use the rom, which then wastes the hard work of porting it to a particular device in the first place. i can live without data since i use wifi heavily, but not being able to receive calls is a no-no.
Hello all. I admit to being a noob in terms of installing custom ROM's but have installed CM 12 to my m919 (Tmobile) S4 which works well - except for no audio during calls...
I have roamed the internet and tried various things like installing Sound About, as well as disabling the 'OK Google' feature, with no success. I have Vonage extensions app on my phone and can make calls fine with that - that is of course, voip, but does establish mic and earpiece work ok.
Is this something to do with the modem? I see mention of installing an updated baseband though I have no idea. I also read somewhere about someone flashing stock lollipop first, then CM 12 to fix it? All a bit bewildering to me at present.
Wondered if anyone had any info. Thanks in advance
Recently I have install lineage OS 14.1 on my Samsung Galaxy Note 3 Neo [N7505]
but In this Rom Camera Error And Incoming nd outgoing calls can't hear
How I fix this?
Please Help.
Arn0__ said:
Recently I have install lineage OS 14.1 on my Samsung Galaxy Note 3 Neo [N7505]
but In this Rom Camera Error And Incoming nd outgoing calls can't hear
How I fix this?
Please Help.
Click to expand...
Click to collapse
If you check the recently posts on the original thread, you can know to fix the calls you only have to open the voice recorder and record an audio (you have to do it every time you reboot your device). And the camera can't be fix at the moment.
Merlin_99 said:
If you check the recently posts on the original thread, you can know to fix the calls you only have to open the voice recorder and record an audio (you have to do it every time you reboot your device). And the camera can't be fix at the moment.
Click to expand...
Click to collapse
Any idea of the data? Does the mobile data works fine?
Mobile data and wifi work fine.
My workaround for the missing sound in phone calls was to install the Google Phone app. After that, the LineageOS phone also worked, but the sound quality of the Google Phone app is still better.
I use SM-N7505 (Note 3 Neo with LTE) and LineageOS 14.1 dated 26/05/2017 .
The only problem to be solved remains the non working camera.
Any updates on camera ? is there any fix to it?
Camera Problem query
@Ani P
There is No fix for camera as camera server is separated from media server from Andoid 7 onwards.
Hope that helped.
codica said:
Mobile data and wifi work fine.
My workaround for the missing sound in phone calls was to install the Google Phone app. After that, the LineageOS phone also worked, but the sound quality of the Google Phone app is still better.
I use SM-N7505 (Note 3 Neo with LTE) and LineageOS 14.1 dated 26/05/2017 .
The only problem to be solved remains the non working camera.
Click to expand...
Click to collapse
How does the data work to you? Am tring on and on, but stil does not connect to any internet or 4G