Related
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....
Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC
Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Build B218
Hi,
i have the Build B218.
Has anyone rooting?
B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps
The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!
Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror
jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor
Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=
WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?
Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse
Did not work on my Wind pentaband P1, the firmware version on mine is B105.
U9200 AIO guide
This guide is made by me, but I've collected information from many others.
Special thanks to: arkedk, Urmet77, lee140685, faust93, spanorg, kiprap and others.
First of all:
1. I am not responsible for ANY bricked device! You are doing this at your own risk.
2. Downloads are located here. Most of my uploads are heavily compressed by 7zip. Only 7zip will unzip correctly.
3. Install ADB and FASTBOOT drivers for making stuff in this guide work. Very easily done with: 15 seconds ADB Installer by Snoop05 @ xda
Eventually: Android SDK | Guide by demkantor | Guide by TeamAndroid
4. Backup stuff you want to keep. Easy with tools such as: MyPhoneExplorer, Super Backup, Titanium Backup or others. (Use Google)
5. Other things you should know:
→ Reboot phone to recovery: Turn on while holding volume up + volume down. Or through ADB: "adb reboot recovery"
→ Reboot phone to fastboot: Turn on while holding volume down. Huawei logo will appear and won't disappear. Or through ADB: "adb reboot-bootloader"
→ Shut down phone if it freezes: Hold power button until dead.
→ For ADB to work, debug mode must be enabled, and you must choose "Hi suite" as USB connection mode.
→ Some Huawei ICS ROM's comes without the FM radio app. If you want it, you can install this apk. NB: ONLY ICS (Android 4.0.X). For JB: B704 was the first version to include FM radio.
Here is "ascend-p1" forum category on xda: https://forum.xda-developers.com/t/ascend-p1
Gain root access (Works on ANY Huawei stock firmware. Inspiration taken from arkedk's thread)
TWRP has the ability to root our device, regardless of firmware version!
1. Download TWRP v2.6.3.0 (img). Unzip it, and place the .IMG in "C:\Program Files (x86)\Android\android-sdk\platform-tools" folder.
2. Turn off your phone. Restart it while holding volume down (Fastboot mode). Connect your phone via USB. (ADB: adb reboot-bootloader)
3. In the "C:\Program Files (x86)\Android\android-sdk\platform-tools"-folder, hold shift while right click. Choose "open command window here".
5. Write "fastboot devices" to verify that the computer detects your device. If not detected, you failed install Fastboot drivers. (Look at the top of this guide)
6. Write "fastboot flash recovery recovery.img". This will flash/ install TWRP to your device. (Given that your recovery file is named recovery.img)
7. Boot into your new recovery, TWRP. (Volume + and - together at startup)
→ Go to the "Mount" menu and mount System.
→ Then go to the Reboot menu and reboot the system.
→ When it detects you are not rooted, TWRP will ask if you want to root.
→ Swipe to do so and let it boot back into the system.
8. Hit the SuperSU icon and let it setup for the first time. Either by downloading a flashable zip or by going to the Play Store. Both methods works.
9. You should now be rooted!
Install/flash stock or custom recovery. (Root not required.)
1. Download the recovery you want. Place the .IMG file in "C:\Program Files (x86)\Android\android-sdk\platform-tools"
2. Turn off your phone. Restart it while holding volume down (Fastboot mode). Connect your phone via USB
3. In the "C:\Program Files (x86)\Android\android-sdk\platform-tools" folder, hold shift while right click. Choose "open command window here".
4. Write "fastboot devices" to verify that the computer detects your device. If not detected, you failed install Fastboot drivers. (Look at the top of this guide)
5. Write "fastboot flash recovery <recovery_name>.img".
→ Let's say the recovery file is named twrp.img. Then you will type: "fastboot flash recovery twrp.img"
6. If unsuccessful, try again, be very careful about typing it right. If successful, write "fastboot reboot" to reboot your phone. You are done.
Install any Huawei stock firmware, regardless of version (even from custom ROM)
- This will delete everything on your phone's internal memory, and you will loose root.
- The easiest way is by first flashing Intermediate Pack (B123). This is a stock Huawei ROM that will flash regardless of previous firmware version. Any Huawei ROM then will flash straight from Intermediate Pack. No build.prop modifications needed!
- Chinese versions don't have GAPPS installed. This must be installed through a custom recovery after flashing the firmware.
1. Grab "Intermediate Pack", desired firmware version, intermediate FashPack. Links in bottom of this guide.
2. Take the RECOVERY.IMG out of intermediate FlashPack, and Install it through the steps above. (fastboot flash recovery recovery.img)
3. Place "Intermediate Pack" UPDATE.APP on your SD-card. The file structure MUST be: (Root of SD-card) dload\UPDATE.APP
4. Boot into recovery (Volume up+down when powering on the device). This should start flashing procedure of B123, Intermediate Pack. If it doesn't work and you come from a custom ROM, you must change build.prop to the one included in Intermediate Pack FlashPack. See "FAQ" on how to replace build.prop.
5. After install, it will boot. Now switch the UPDATE.APP from Intermediate Pack with the one from desired firmware version. ((Root of SD-card) dload\UPDATE.APP)
6. Boot to recovery. The firmware flashing procedure will start.
Chinese version extra instructions. This is the time to install GAPPS! B704 extra instructions! arkedk has made a zip to enable all languages in B704. Grab Enable all languages in B704, by arkedk
→ FIRST boot the phone after the firmware installation has succeed.
→ Grab GAPPS corresponding to your android version. (I recommend miuiandroid.com's GAPPS lite, as they removed all unuseful stuff) Place the .zip on the sd-card. Place language enabler.zip on the sd-card as well
→ Install a TWRP v2.4.4.0 recovery
→ Boot into recovery. Install GAPPS.zip. Install language enabler .zip as well
→ Reboot. TWRP will ask you if you want ROOT access. Entirely up to you! For the language enabler to work, you must do a device reset. Relax, GAPPS should be there after the reset.
7. Done! If you want root access, check root guide on top. You can remove Chinese system apps with Uninstall Master. Weather, baidu, and Chinese market won't work outside china anyway. REQUIRES ROOT!
OLD METHOD
Install any Huawei stock firmware, regardless of version (even from custom rom) B229 is a bit different. See "FAQ" at bottom.
This will delete everything on your phone's internal memory, and you will loose root.
Your phone must be rooted for this method to work (replacing/modifying build.prop. Check FAQ about build.prop if you have any questions)
1. Grab firmware (UPDATE.APP), recovery.img and build.prop (Both included in attached FlashPacks) for desired firmware version. Links in buttom of this guide.
2. Place UPDATE.APP on your SD-card. The file structure MUST be: (Root of SD-card) dload\UPDATE.APP
3. Install recovery through the steps above.
4. Download and open "Universal Android AIO Flasher Tool$" to replace build.prop:
→ A: Open desired build.prop in notepad, notepad++ or similar. Copy everything.
→ B: Connect phone in ADB mode (See "First of all" ↑ ).
→ C: Open "Universal Android AIO Flasher Tool$". Go to "Build.prop Editor"-tab
→ D: Insert what you copied into the empty text field.
→ E: Click the "save" button and then "Flash to device". You must grant access with SuperSU (or whatever superuser access management tool) on your phone.
→ F: If successful, you must click "Reboot device" for the changes to take effect. Let the phone reboot.
Manually: "adb pull /system/build.prop" to get the build.prop from your phone.. "adb push build.prop /system/build.prop" to push build.prop to device. "adb reboot" to reboot it (Must be done)
5. After reboot, check "Settings -> About" to check if stated firmware version has been changed to the one you want.
6. Turn off your phone. Restart while pressing volume up + volume down. The firmware flashing procedure will start. If not, you have done something wrong.
7. Done.
Install custom firmwares/ROMs (Root not required)
- This will delete everything on your phone's internal memory. Backup stuff you want to keep.
- All custom ROMs i know is pre-rooted, so nothing to worry about there!
- You will need custom recovery for this to work. Look above.
Depending on firmware, GAPPS (Google Apps) might not be included and must be flashed afterwards if it's wanted. I recommend miuiandroid.com's GAPPS lite, as they removed all unuseful stuff
1. Download desired 3rd-party firmware, it must be a CWM/TWRP flashable .zip. Place it on you memory card. If you're flashing GAPPS aswell, place gapps.zip on the memory card too.
2. Reboot you phone to recovery.
3. Wipe everything the custom firmware needs to have wiped. Generally cache, dalvik and user data.
4. Flash the firmware .zip. Wait for everything to finish!
6. Restart the phone. It will use alot of time the first time. If it uses more than, let's say.. 7 minutes, something is wrong (bootloop).
You can eventually try these steps:
→ Wipe cache, dalvik and userdata with CWM.
→ If this does not solve the problem, check the files and reflash. If it still bootloops: The files don't work with U9200.
If you are going to flash GAPPS, now after the first boot is the time to do it. Boot into recovery, then flash the GAPPS .zip corresponding to your firmware version.
7. Restart and enjoy!
"Ey, Olav! Do you know any other useful stuff I can do to my rooted phone?"
These settings can be edited by using the app Root Browser, for instance.
Boost GPS performance by changing default server to the respective one for your country. Should make the GPS faster and more precise.
The file holding this information is located in: /system/etc/gps.conf
Find respective gps server (NTP) here: http://www.pool.ntp.org/zone/@
I'm from Norway. My customized gps.cfg looks like this:
Code:
NTP_SERVER=no.pool.ntp.org
XTRA_SERVER_1=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
XTRA_SERVER_2=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
XTRA_SERVER_3=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
# SUPL_HOST=supl.google.com
# SUPL_PORT=7276
Fix GPS log bug found in some Huawei ROMs. There seem to be a bug, where stock Huawei ROMs will create huge unnecessary GPS logs, that eventually will fill your entire SD card with trash! (We are talking several 100 MB's of logs!).
Disable log keeping by editing a setting in this file: /system/etc/gpsconfig.xml.
Edit: "cLogEnabled" from "true" to "false". Then delete all the logs in: system/data/gps/log.
FAQ
Install latest baseband version
Why? Baseband / radio.img is the software controlling everything that has to do with signal. Newer baseband versions can boost your performance + make battery last longer. It might make things worse, but generally newer means better.
How? There is no way to extract radio.img from Huawei firmware at this point. So only way to do this is through flashing a stock firmware from Huawei containing the baseband (radio.img) version you want. (New firmware sometimes includes updated baseband version). If you want custom firmware/ROMs you can flash them over it, baseband version will remain/ radio.img/baseband is not included in custom firmwares/ROMs. Flashing any Huawei firmware will replace baseband with its own version.
For flashing procedure, see "Install any Huawei stock firmware, regardless of version you are on (even from custom rom)"
GAPPS
Why? You want Google applications, but it's not included in the ROM you've flashed.
Which? GAPPS is made for every android version (ICS=4.0.x, JB=4.1.x/4.2.x). Make sure you pick the right one! (Links in download section). I recommend OpenGapps Pico. Heavier GAPPS will make your device much slower.
How?
- Download GAPPS.zip, move it to your memory card.
- Use custom recovery such as CWM or TWRP to flash it.
Remember:
- Has to be done after the ROM is flashed (obviously) and it's recommended to boot the ROM once before flashing GAPPS.
- All Huawei stock firmwares (Except Chinese versions) have this preinstalled.
What does "Root"/"Root access" mean?
- System files is not editable on stock firmware. Editing these can potentially make your phone into a brick. To remove these restrictions follow the steps in my guide.
- Rooting will in most cases destroy warranty!
- MIUI, CM and other custom ROMs are pre-rooted[/I]
What is build.prop?
- This is a text file stored on your phone, which tells the phone about what firmware version it has + some other stuff.
Why replace build.prop?
Build.prop stores lots of settings and info about your phone. Changing it is most commonly used for tricking the upgrade procedure to think the firmware on the phone is compatible with the update.
- Huawei firmware updates is restricted to some few firmware versions. But they have made a "Intermediate Pack" which will flash from ANY stock huawei ROM. All huawei ROM's will flash from this intermediate pack without the need of changing build.prop. Think of "Intermediate Pack" as a intermediary for getting the firmware version you want.
- If you come from a custom ROM, and intermediate pack won't flash (verification fail in recovery), you must change build.prop to any stock huawei build.prop for it to work.
How to replace build.prop?
Phone must be rooted!
NB: There's a chance your custom ROM won't boot because of using stock Huawei build.prop with it. In case of updating to Huawei stock firmware, be smart. Flash stock recovery, and add the update.app to SD card BEFORE you change build.prop!
- Get desired build.prop (included in my "FlashPack" files.
- Download Universal Android AIO Flasher Tool$, by "fonehacker".
- Plug your phone in ADB mode. Open the tool above. Go to build.prop tab. Open your recovery. Press save. Then flash it to your device.
- Device must restart for the changes to work. The tool will ask you about this, and you press YES.
(Alternative: Take a custom rom zip (LineageOS for instance), open zip without unzipping (Use 7-zip), delete all the folders in the /system, including build.prop. Drag desired build.prop to /system folder. Flash this file from a custom recovery, such as CWM or TWRP. No root needed.)
What is boot.img for?
- It's a file that get flashed to your boot partition on the phone. This file is managing the booting process of your phone. This file is included in all ROM's, therefore there is no need for manual flashing. If the boot partition get's damaged in any way, flashing a boot.img made for the same firmware can fix it. Don't try boot.img from different firmwares/android version!
Why is boot.img included in your FlashPacks?
- ROM developers might use it for developing new and better roms. If you just are updating your phone, you will have no use for it.
What is EmUI?
- Huawei is making a custom version of android for their phones. This project is named Emotion UI, EmUI in short.
What is latest firmware(s) for my U9200?
- The download section always contains latest version of Huawei firmware. If there is a new version I have not listed, tell me
What's the difference of "boot recovery" and "flash recovery"?
Boot recovery will make your phone boot from the recovery file stored on your computer (Through fastboot, your phone is connected with usb)
Flash recovery will replace what ever recovery you already have on your phone.
Can I remove/change battery?
- It's not meant to be possible as there is no plastic cover you can remove without disassemble the phone. There is a small bolt underneath the SD-card cover. I think that's the place to start if you want to open it. This will most certainly break the warranty. If the phone's hardware misbehave in any way you should contact Huawei or the store you bought it from.
Guides:
→ How to split Huawei firmwares (get boot.img and recovery.img for a given Huawei firmware): http://madmodder.co.uk/huawei_gener...recovery-images-from-most-huawei-firmware.htm
→ How to root and install custom ROM and recovery, by lee140685: https://forum.xda-developers.com/showpost.php?p=33621360&postcount=310
→ Firmwares with flashing guide, by arkedk: https://forum.xda-developers.com/showthread.php?t=2075028
→ How to setup and use fastboot, by demkantor (Absolutely noob proof): https://forum.xda-developers.com/showthread.php?t=2277112
→ How to install and set up fastboot and adb (Android SDK), by Team Android: http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/
<.< Download links is found in a separate post - Click the image below >.>
Something's missing? You got feedback? Updates I've not included yet? Anything else? Reply to this thread.
Please press THANKS if this guide has helped you
Great job,man! Thanks!:good:
This is THE GUIDE! :good:
Re: [GUIDE] Huawei Ascend P1 U9200 COMPLETE
Thanks Olav.
I suksessfulle installed muiu english v. On my p1.works Great.
Sent from my HUAWEI U9510E using xda app-developers app
gifr87 said:
Thanks Olav.
I suksessfulle installed muiu english v. On my p1.works Great.
Sent from my HUAWEI U9510E using xda app-developers app
Click to expand...
Click to collapse
Nice No problem!
Any Non-Huawei screenshots for EMUI? I mean uploaded by users
How's it working generally? Better than stock 4.0.3? Any bugs?
Thx
Great All-In-One for the Ascend P1... Was thinking about doing the same, but then I saw you already did it ...
Great work Olav!
arkedk said:
Great All-In-One for the Ascend P1... Was thinking about doing the same, but then I saw you already did it ...
Great work Olav!
Click to expand...
Click to collapse
Thanks
New EmUI beta, chinese version. B528
Mirror: https://mega.co.nz/#!7oRRlZ5Z!f8jFjj_HgVw1OWRLCbg4vgVloQNgRgNsNHv_f1C-wfY
FlashPack (Includes build.prop, recovery.img and boot.img): https://mega.co.nz/#!O9wjXByA!VzMAVV9zhmC70K9VI7jhwWLlDAs8CnBCvnfrAnVaRyc
o-l-a-v said:
Thanks
New EmUI beta, chinese version. B528
Mirror: https://mega.co.nz/#!7oRRlZ5Z!f8jFjj_HgVw1OWRLCbg4vgVloQNgRgNsNHv_f1C-wfY
FlashPack (Includes build.prop, recovery.img and boot.img): https://mega.co.nz/#!O9wjXByA!VzMAVV9zhmC70K9VI7jhwWLlDAs8CnBCvnfrAnVaRyc
Click to expand...
Click to collapse
perfomance wise, is emui better to miui?
areankim said:
perfomance wise, is emui better to miui?
Click to expand...
Click to collapse
When I tried the jelly bean emui, I thought it was a bit of a ripoff of MIUI. I like MIUI better.
Sent from my U9200 using xda app-developers app
Guys, jst flash to EMUI B528 custom without gapps, and dowlonad the 4.1.x gapss 20121011 but after i flash it, nothing appear.
then i tried the prev version and 20121130, stll nothing. Weird,
areankim said:
Guys, jst flash to EMUI B528 custom without gapps, and dowlonad the 4.1.x gapss 20121011 but after i flash it, nothing appear.
then i tried the prev version and 20121130, stll nothing. Weird,
Click to expand...
Click to collapse
You rooted before flashing GAPPS?
The "power bar"
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
JJVilzu said:
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
Click to expand...
Click to collapse
Check in the Display settings if the "Notification settings" option is checked. See screenshot from the B226 ROM attached. I hope it's still there?
Boot animation can changed with the AIO flasher tool.
Krizzii said:
Check in the Display settings if the "Notification settings" option is checked. See screenshot from the B226 ROM attached. I hope it's still there?
Click to expand...
Click to collapse
I checked, it's not there in B229 wtf
JJVilzu said:
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
Click to expand...
Click to collapse
Read Dddrko's post on page 13 at http://forum.xda-developers.com/showthread.php?t=1694228&page=13, he explained how to restore toggles.with this metod u will also restore original bootanimation.
Hello,
I own an huawei u9200
I would like to flash the B229 ROM on my device running B102.
I find this thread very interesting however I have a problem at the very first step.
I can't install fastboot usb drivers
I've been trying to follow the guide you linked at the top of your post, I had a slight issue with ADB Drivers as well,
I could not make those Google USB Drivers downloaded through Android SDK work, I would get the error telling me those drivers are not developed to work with windows x64. But after checking with the command prompt, it turns out that the drivers I needed were already installed and the device is detected as ADB Device.
Back on my current issue:
I understand that I have to shut down my phone and switch it on while pressing both volume up and volume down and after turning it on, I have to plug it to the computer through USB cable. My phone does turn on in download mode, however when I connect it to the USB my computer doesn't detect anything.
Is the screen I am getting the right screen or should I switch the phone on with a different shortcut?
How do I get my computer to detect my phone when I switch it on with the volume+&- buttons?
Which are the correct fastboot drivers to install and where can I download them?
I hope to receive assistance as soon as possible.
Thank you.
EDIT:
I've managed to reboot correctly by using ADB command prompt (typing ADB reboot fastboot)
Now, I'm trying to root and in the command prompt I get this error:
"cannot load 'cwm_touch_recovery_viva_beta.img': No error"
EDIT:
Supersu installed.
Now when attempting to edit the build.prop I get a error message
I check the Concole and I see "Remount failed: Operation not permitted
But I granted root access when prompted. Any Idea?
EDIT:
Tried 39 times until I got it successfully.
And don't ask me how. It's beyond me.
Checked About and version is good.
Now rebooted and "Version list verify fail!"
WHY?
I've checked the build.prop and it is flashed,
I've flashed the 229recovery.img
I reboot and it gives me "Version list verify fail!"
What could have I done wrong?
DenesS said:
I've checked the build.prop and it is flashed,
I've flashed the 229recovery.img
I reboot and it gives me "Version list verify fail!"
What could have I done wrong?
Click to expand...
Click to collapse
Try with the build.prop from b226, avaible here: http://openbuildprop.scheffsblend.com/mfg/Huawei (copy -> paste into notepad, save as build.prop)
o-l-a-v said:
Try with the build.prop from b226
Click to expand...
Click to collapse
Ok, this makes sense, it probably wouldn't like to update to a version which is already installed.
This wasn't clear on the tutorial, thanks for the hint.
I'm trying now
EDIT:
Nope, still "Version list verify fail!"
Even though I checked in the "About" and the version shown is B226, which means the .prop was correctly flashed.
So what could the problem be?
EDIT:
Should I also try flashing the B226 recovery?
Do you have a link for any download page?
Can I flash it directly through CWM? CWM wants a root://Update.zip can I put my UPDATE.APP into a zip archive and flash it or does it work differently?
People have had problems updating to B229 with the build.prop i extracted from the B229 fw.
There is simply a little difference at this line:
Code:
ro.build.display.id=V100R001C00B229
It should be:
Code:
ro.build.display.id=U9200-V100R001C00B229
Build.prop from all earlier firmwares (Exept B226) including EmUI betas and stables have the "U9200-"-part before product version on this line.
This is a mistake by Huawei, not me :good:
Updated the FlashPack for B229, new link from mega in first post!
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Well, you didn't had TWRP as recovery, so no nandroid backup available. From one of my experiences with flashing a stock rom for acer, I had to delete some lines of code from the meta inf folder relating the version of the phone, in order to successfully flash it. Maybe the stock ROM you are trying has some lines of code detecting if bootloader unlocked.
Im also having trouble getting a good tutorial for getting rid of the os or just to have magisk on the tablet
You dowoad latest rom and flash stock via hru and. Twrp search xda
unbrick Huawei MediaPad M5 Lite
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Click to expand...
Click to collapse
Unbrick using Huawei Multi tool .
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what could do next to approach the problem?
dnrob
Click to expand...
Click to collapse
You can install these roms only if you can downgrade to update v177 and lower
Like me you need to Unbrick your mediapad m5 lite
First place need to go back in Fastboot mode.
So UNPLUG , turn off , wait a second and turn on with volume Down , when screen blink release power button and keep volume down pressed a second until Fastboot mode
Or, try to boot in Fastboot with volume down + power AND USB plugged in goes into fastboot, or TWRP if you flashed TWRP to RECOVERY2 instead to RECOVERY.
If doesnt work try the same plug or unplug cuz we have Recovery_ramdisk , eRecovery and eRecovery2
WHEN its okay and you can turn on fastboot mode
Second prepair the img's for unbricking
The LEGIT methods its come back stock rom , then you'll be able to do what you want.
Download Huawei Multi-Tools , Huawei Update Extractor and update.zip of your stock ROM and update_data_full
Then use Huawei Update Extractor to extract
system.img ramdisk.img recovery_ramdisk.img From update.app\update.zip and
Cust.img from update.app\update_full_public.zip.
If you have backup of your userdata.img its the time to put all together in the same directory before go futher.
If all its good , you just need to click unbrick.
Maybe i'll soon do a guide for unbrick and prevent brick , and how install twrp without losing data or encryption data
helmuth said:
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
Click to expand...
Click to collapse
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
BesterTrainer said:
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
Click to expand...
Click to collapse
sasuke988 said:
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
Click to expand...
Click to collapse
https://
pro-teammt.ru/
en/
online-firmware-database/
?firmware_model=BAH2-W19&firmware_page=0
Check out your model (C432C431/...)
Use the huawei extractor to extract the images
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Raresh T said:
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Click to expand...
Click to collapse
It's for the 8" screen variant. It won't work on our 10.1"
is there any current custom house for this model because no links work. And on the stock, I have a problem with 5ghz Wi-Fi
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
SkipM4 said:
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
Click to expand...
Click to collapse
thats an interesting suggestion. could you post some guides on how could someone rebrand their device ?