Develop Bugs

HTC One E9+ rooted! Need to back stock!

Hello! I have HTC One E9+ chines version! This phone are rooted and has twrp recovery! I need to get ota updates back! Pls help me!
I post more details!

What's your device's CID and main version ?
There are two version of China E9+

HTC CID!
sabpprook said:
What's your device's CID and main version ?
There are two version of China E9+
Click to expand...
Click to collapse
My HTC One E9+ has this CID HTCCN701

Use at your own risk
download and unzip
https://www.androidfilehost.com/?fid=24369303960684554
use the commands to flash images
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Here's the firmware
https://www.androidfilehost.com/?fid=24369303960684523

sabpprook said:
Use at your own risk
use the commands to flash images
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
The zip file with boot recovery and system.img are corupted!
When I try to flash system.img appear this message: error: cannot load 'system.img'
Click to expand...
Click to collapse

Mirel Ranete said:
sabpprook said:
Use at your own risk
use the commands to flash images
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
The zip file with boot recovery and system.img are corupted!
When I try to flash system.img appear this message: error: cannot load 'system.img'
Click to expand...
Click to collapse
I have similar problem before.
Use this htc-fastboot to work on it again
https://www.androidfilehost.com/?fid=24349802275799286
Click to expand...
Click to collapse

OK....
sabpprook said:
Use at your own risk
download and unzip
use the commands to flash images
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
rayau85 said:
Mirel Ranete said:
I have similar problem before.
Use this htc-fastboot to work on it again
Is need to flash firmware?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse

No. The 3 img file is good enough.

I bricked my z play

Dear all,
after a try to load the Chinese twp and root my z play I bricked my phone. Now the only think that I can get is fast boot screen that says:
bl:co.14
baseband: not found
product: xt1635-02 32gb p7
serial number:
.
.
.
flashing_unlocked
.
.
I am trying to load the XT1635-02_ADDISON_RETUS_6.0.1_MPNS24.104-49-4 firmware by running a bat file that I found somewhere around with the following commands:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase DDR
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
But I get a screen says erasing... and the boot loop!!!
ANY IDEAS GUYS??
thx in advance for your help!!!:crying::crying::crying::crying:

asprofridis said:
Dear all,
after a try to load the Chinese twp and root my z play I bricked my phone. Now the only think that I can get is fast boot screen that says:
bl:co.14
baseband: not found
product: xt1635-02 32gb p7
serial number:
.
.
.
flashing_unlocked
.
.
I am trying to load the XT1635-02_ADDISON_RETUS_6.0.1_MPNS24.104-49-4 firmware by running a bat file that I found somewhere around with the following commands:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase DDR
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
But I get a screen says erasing... and the boot loop!!!
ANY IDEAS GUYS??
thx in advance for your help!!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Just flash the boot.img, recovery.img , all sparsechunks.img and the OEM.img using fastboot.
After you've flashed type in fastboot erase userdata and then fastboot reboot and see what happens
Sent from my XT1635-02 using XDA-Developers Legacy app
---------- Post added at 09:25 PM ---------- Previous post was at 09:23 PM ----------
You should never flash using a short cut or a bat file found in some obscure thread or website
Sent from my XT1635-02 using XDA-Developers Legacy app

Is the device recognized by fastboot?
Command: fastboot devices

Guys, I have a similar problem.
After an update of the android give error, I can no longer connect my moto z play.
Nor in fastboot and adb enters.
See video:
http://youtu.be/o8yYn0hNers

Luiz_Pennywise said:
Guys, I have a similar problem.
After an update of the android give error, I can no longer connect my moto z play.
Nor in fastboot and adb enters.
See video:
http://youtu.be/o8yYn0hNers
Click to expand...
Click to collapse
Oh man, the same problem here. I was updating the android for N and when restart the phone doesn't turn on, I'm crazy because I don't find anything to fix :crying::crying::crying::crying:

Luiz_Pennywise said:
Guys, I have a similar problem.
After an update of the android give error, I can no longer connect my moto z play.
Nor in fastboot and adb enters.
See video:
http://youtu.be/o8yYn0hNers
Click to expand...
Click to collapse
kaue152 said:
Oh man, the same problem here. I was updating the android for N and when restart the phone doesn't turn on, I'm crazy because I don't find anything to fix :crying::crying::crying::crying:
Click to expand...
Click to collapse
Have you guys downgraded to Marshmallow, then tried updating to N again? Particularly after installing the April update?

IncendiaryPyro said:
Have you guys downgraded to Marshmallow, then tried updating to N again? Particularly after installing the April update?
Click to expand...
Click to collapse
How should I do this? I was reading this topic https://forum.xda-developers.com/moto-z-play/how-to/moto-z-play-reteu-firmware-otas-t3557917
and they said that necessary download russian firmware, is it right?

kaue152 said:
How should I do this? I was reading this topic https://forum.xda-developers.com/moto-z-play/how-to/moto-z-play-reteu-firmware-otas-t3557917
and they said that necessary download russian firmware, is it right?
Click to expand...
Click to collapse
I'm not sure. I believe you need a blankflash file for that firmware from what I've gathered, if it was a downgrade to Marshmallow after the April update for N, then updating back to N.

IncendiaryPyro said:
I'm not sure. I believe you need a blankflash file for that firmware from what I've gathered, if it was a downgrade to Marshmallow after the April update for N, then updating back to N.
Click to expand...
Click to collapse
I'm was updating for Nougat, probabily was that April update. Honestly I don't know what to do

kaue152 said:
I'm was updating for Nougat, probabily was that April update. Honestly I don't know what to do
Click to expand...
Click to collapse
Have you ever downgraded to Marshmallow at any time before that happened?

IncendiaryPyro said:
Have you ever downgraded to Marshmallow at any time before that happened?
Click to expand...
Click to collapse
Yep, I'm was using ViperOS, I'm downgraded to stock Marshmallow and was doing the OTA updates. When the phone reboot to install Nougat this happened.

kaue152 said:
Yep, I'm was using ViperOS, I'm downgraded to stock Marshmallow and was doing the OTA updates. When the phone reboot to install Nougat this happened.
Click to expand...
Click to collapse
Ah, so it was the update to Nougat that caused it. Yeah that has something to do with a bootloader upgrader in the April update I believe. You'll have to wait for a blankflash file to surface to repair that issue, unfortunately. Only reason I was asking was because I downgraded to Marshmallow a few months ago, then OTA'd back to Nougat, then also got the March update later down the road and never had any issues. I haven't gotten the April update yet but it'll be a good reminder to me not to downgrade to Marshmallow again.

IncendiaryPyro said:
Ah, so it was the update to Nougat that caused it. Yeah that has something to do with a bootloader upgrader in the April update I believe. You'll have to wait for a blankflash file to surface to repair that issue, unfortunately. Only reason I was asking was because I downgraded to Marshmallow a few months ago, then OTA'd back to Nougat, then also got the March update later down the road and never had any issues. I haven't gotten the April update yet but it'll be a good reminder to me not to downgrade to Marshmallow again.
Click to expand...
Click to collapse
How did you fix it? I found a blankflash and another rom to install

kaue152 said:
How did you fix it? I found a blankflash and another rom to install
Click to expand...
Click to collapse
I never had to fix it. I downgraded from the January patch for N (which I had sideloaded), OTA'd from Marshmallow to N + the February patch from my carrier, then I got prompted for March's update a few weeks later, so I guess there was never an issue downgrading back then, but something changed in April's patch that causes hardbricks when you downgrade and try to go back to Nougat. I've never had the April patch installed before so it hasn't affected me. From what I've read, it's only happened to people who had downgraded after installing April's update. Sorry I can't offer any help there. :/

PLEASE ALL GO TO THIS LINK
Http://lenovo-forums.ru/topic/20594-moto-z-play-obschaya-tema-voprosov-i-otvetov/#comment-550611
WHILE MORE OF US SEE AND LEN LIKE THE COMMENT OF
* VVizard @
SAGE
THEY COULD HELP US CHECK IT

Hello there. So, after flashing the TWRP my moto z play got bricked and now it remains at the "bad key" screen at boot. I can get into the fastboot screen and the recovery. To my understanding, I need to flash some firmware. My doubts are; does it matter which one of all I flash? And, most are marshmallow: I had nougat before this happened so, will I have trouble flashing these? Thanks!

Kon22 said:
Hello there. So, after flashing the TWRP my moto z play got bricked and now it remains at the "bad key" screen at boot. I can get into the fastboot screen and the recovery. To my understanding, I need to flash some firmware. My doubts are; does it matter which one of all I flash? And, most are marshmallow: I had nougat before this happened so, will I have trouble flashing these? Thanks!
Click to expand...
Click to collapse
Flash only system, data and boot. Do not mess with the modem, efs and bootloader images.

[GUIDE] Unbrick MOTO Z Play.... work in progress! (not working yet)
https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492

Moto z play updated blankflash
https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492/page19
Go here .. flash the files and thank god and the OP.

Stock rom

Can anyone pls tell me where I can download stock rom for (lenovo) p2 preferable in zip format . And is there any unbricking tutorial .

I want this too...? if anyone can help...

I have found the stock ROM, I bricked my device in the rooting process, and am unable to flash the complete stock image, because the device reports "unable to flash bootloader on unlocked device"

itsjustbilly said:
I have found the stock ROM, I bricked my device in the rooting process, and am unable to flash the complete stock image, because the device reports "unable to flash bootloader on unlocked device"
Click to expand...
Click to collapse
Hi, because you should not flash bootloader.
you can try those 2 solutions:
the fast one, it should work. The flashall command flash every.img files he find in the fastboot directory. So try to remove the bootlader.img and execute the flashall command.
the manual one (longer one):
Put only the recovery.img, boot.img, and the system.img files ( you should have something like 13 , named "systemchunk0/12.img") in your fastboot directory and flash with fastboot ( the command is always the same: fastboot flash recovery recovery.img, fastboot flash boot boot.img, and for every single part of system.img you should flash like "fastboot flash systemchunk0(until 12).img " so you flash flash 13 times the system with avery 13 parts .
Sorry for my english i hope you solved that

itsjustbilly said:
I have found the stock ROM, I bricked my device in the rooting process, and am unable to flash the complete stock image, because the device reports "unable to flash bootloader on unlocked device"
Click to expand...
Click to collapse
Then share it no

I'll post links when I get to my computer, but they're not Cwm flash able zips, they are fast boot files that you flash from DOS on a pc
---------- Post added at 09:39 AM ---------- Previous post was at 09:37 AM ----------
aleleo87 said:
Hi, because you should not flash bootloader.
you can try those 2 solutions:
the fast one, it should work. The flashall command flash every.img files he find in the fastboot directory. So try to remove the bootlader.img and execute the flashall command.
the manual one (longer one):
Put only the recovery.img, boot.img, and the system.img files ( you should have something like 13 , named "systemchunk0/12.img") in your fastboot directory and flash with fastboot ( the command is always the same: fastboot flash recovery recovery.img, fastboot flash boot boot.img, and for every single part of system.img you should flash like "fastboot flash systemchunk0(until 12).img " so you flash flash 13 times the system with avery 13 parts .
Sorry for my english i hope you solved that
Click to expand...
Click to collapse
I did try this, but I still have no signal because the modem file is part of the bootloader, and no modem means no mobile signal

itsjustbilly said:
I'll post links when I get to my computer, but they're not Cwm flash able zips, they are fast boot files that you flash from DOS on a pc
---------- Post added at 09:39 AM ---------- Previous post was at 09:37 AM ----------
I did try this, but I still have no signal because the modem file is part of the bootloader, and no modem means no mobile signal
Click to expand...
Click to collapse
Ah ok i didnt understand that you have this modem issue. I don't kno how to help you...you phone is bricked so you can test few solutions without more risks .
before flash the original recovery , boot and system by fastboot, you can try to install TWRP again and flash only the bootloader from TWRP (should support .zip and .img files). Then you turn the phone in fastboot mode and flash other stuff .

Taken from post 4 of the TWRP page on lenovo P2 forum
smaranramesh said:
Then share it no
Click to expand...
Click to collapse
Factory Images & Systemless Mode
Q: I messed up help me?!
So you screwed up and didn't follow Rule Number One in the IT-Handbook?
Which is: Always create a backup before working on a system?
Download the Factory State Images. Which are all flashable with fastboot: https://goo.gl/JTCwKj
Place the files you want replaced into the "Minimal ADB & Fastboot" installation directory and start it's shell:
If you want to flash back the stock image. Simply run:
Code:
Code:
fastboot flashall
You can also replace all partitions if required.

itsjustbilly said:
Download the Factory State Images. Which are all flashable with fastboot: https://goo.gl/JTCwKj
Click to expand...
Click to collapse
Thanks, I was on P2a42_S038...TMO (T-Mobile, checking OTA update = you are using latest software) flashed this P2a42_S048_ and got OTA info to download latest ROM P2a42_S062_170117_ROW (103MB) :good:

veimus said:
Thanks, I was on P2a42_S038...TMO (T-Mobile, checking OTA update = you are using latest software) flashed this P2a42_S048_ and got OTA info to download latest ROM P2a42_S062_170117_ROW (103MB) :good:
Click to expand...
Click to collapse
Witaj. Mozesz napisać jak wgrałeś czysty soft do Lenovo p2. Tez mam rom z t.mobile a nigdzie nie ma poradnika jak wgrać czysty soft.Pozdrawiam

itsjustbilly said:
Taken from post 4 of the TWRP page on lenovo P2 forum
Factory Images & Systemless Mode
Q: I messed up help me?!
So you screwed up and didn't follow Rule Number One in the IT-Handbook?
Which is: Always create a backup before working on a system?
Download the Factory State Images. Which are all flashable with fastboot: https://goo.gl/JTCwKj
Place the files you want replaced into the "Minimal ADB & Fastboot" installation directory and start it's shell:
If you want to flash back the stock image. Simply run:
Code:
Code:
fastboot flashall
You can also replace all partitions if required.
Click to expand...
Click to collapse
Is there an alternative download link? What is Mega? I want to avoid these third party download utility if I can...

I put the following into a BAT file and placed it into ADB / Fastboot directory:
Code:
fastboot flash partition gpt_both0.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash system systemchunk0.img
fastboot flash system systemchunk1.img
fastboot flash system systemchunk2.img
fastboot flash system systemchunk3.img
fastboot flash system systemchunk4.img
fastboot flash system systemchunk5.img
fastboot flash system systemchunk6.img
fastboot flash system systemchunk7.img
fastboot flash system systemchunk8.img
fastboot flash system systemchunk9.img
fastboot flash system systemchunk10.img
fastboot flash system systemchunk11.img
fastboot flash system systemchunk12.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
pause
Extract all the files listed in the BAT file or simply extract the entire archive to ADB / Fastboot and launch the BAT file.

Does this work?? @Undesirable
the above post

Oh yeah, it unbricked me and put me back to stock so I could get OTA updates for Nougat. You need the archive posted earlier in the thread though.

@Undesirable Nice and elegant solution man! Typing all this stuff was so annoying.

For those who need an alternative download source, I offer this magnet link:
Code:
magnet:?xt=urn:btih:ef05ea3af4da8a0cbb137c10621942f3ae16d46f&dn=P2a42_S048_161111_ROW_fastboot.7z
It's slow unless lots of people help to seed it.

Is it possible to flash this firmware 2a42_S048_161111_ROW_fastboot.7z on the P2c72 with firmware build number: V3.5_1652_5.1342.1_ST_p2c72 ???
I bought this phone 4GB Ram/64GB from china, but I want to put the international firmware on it.
Thanks!

itsjustbilly said:
Taken from post 4 of the TWRP page on lenovo P2 forum
Factory Images & Systemless Mode
Q: I messed up help me?!
So you screwed up and didn't follow Rule Number One in the IT-Handbook?
Which is: Always create a backup before working on a system?
Download the Factory State Images. Which are all flashable with fastboot: https://goo.gl/JTCwKj
Place the files you want replaced into the "Minimal ADB & Fastboot" installation directory and start it's shell:
If you want to flash back the stock image. Simply run:
Code:
Code:
fastboot flashall
You can also replace all partitions if required.
Click to expand...
Click to collapse
how can I replace my data partition? It's not getting formatted due to an encryption error

If fastboot erase userdata doesn't work, then use TWRP to change user data file system to EXT4 then change it back to F2FS again.

Need help...
I flashed back the stock ROM (due to encryption error in custom 7.0 ROM) using fastboot commands, but my SIGNAL WON'T WORK after I started d phone . I've tried reflashing the stock firmware (and also custom ROMs) but my phone won't detect the signal. "About phone" settings show unknown baseband and IMEI... how to get it back
---------- Post added at 08:58 AM ---------- Previous post was at 08:06 AM ----------
I've flashed 'ROW' variant of stock ROM. Is there a different version for Indian variant?

Motorola One Vision July update

Good news, motorola anounced the July update for the Motorola One Vision in his blog.
https://support.motorola.com/rola/e...family/motorola-one-vision/documents/MS141417
This update includes the july 1 security update
I don't know the delay but today in August 1 the update is available

I got my device in May and already recieved the June update, so it's not the first for me.
But I believe one vision was released later (June) for some regions.

luisjoseb said:
Good news, motorola publishied the first update for the Motorola One Vision in his blog.
https://support.motorola.com/rola/e...family/motorola-one-vision/documents/MS141417
This update includes the july 1 security update
I will update the post when this come to the device!!!
Click to expand...
Click to collapse
Do you know if this update solve the bootloop caused by enable fingerprint along with developer option ?

AndresOrue said:
Do you know if this update solve the bootloop caused by enable fingerprint along with developer option ?
Click to expand...
Click to collapse
Awaiting the update. But I don't think what you have described is the actual issue. I have fingerprint and developer options enabled and the device works just fine.
From what I have read, the issue is fingerprint + changing the default USB configuration. Isn't it?

baunthiyal said:
Awaiting the update. But I don't think what you have described is the actual issue. I have fingerprint and developer options enabled and the device works just fine.
From what I have read, the issue is fingerprint + changing the default USB configuration. Isn't it?
Click to expand...
Click to collapse
I changed that setting the first time and the phone enter in a bootloop and because I had to reset everything, I didn't try again . In this moment, I have developer option enable and the fingerprint disable.

AndresOrue said:
I changed that setting the first time and the phone enter in a bootloop and because i had to reset everything, I didn't try again . In this moment i have developer option enable and the fingerprint disable.
Click to expand...
Click to collapse
Here's my journey with Vision as of now -
1. Got this phone last week
2. Added fingerprints
3. Updated to PSA29.137-17
4. Enabled developer options
5. Changed all animation rates in developer options to 0.5
I'm not sure you should try steps 1-4. But personally, I didn't have the issue you have described.

baunthiyal said:
Here's my journey with Vision as of now -
1. Got this phone last week
2. Added fingerprints
3. Updated to PSA29.137-17
4. Enabled developer options
5. Changed all animation rates in developer options to 0.5
I'm not sure you should try steps 1-4. But personally, I didn't have the issue you have described.
Click to expand...
Click to collapse
Thanks mate. I enabled fingerprint and developer option and it works. Seems that the problem was what You said, enable fingerprint and changing the default USB configuration.

i just installed this update and after i checked the app for new android update it told me:
integrity system corrupted
You will not be able to get any future updates.
Go to the store and official rom will be installed
Something like this .. Do you see this aswell?

I have bought my one vision the day it became available in my country, June 3rd, I have April's security patch and nothing to update, is there any other security patch available?

ᕙ(⇀‸↼)ᕗ said:
i just installed this update and after i checked the app for new android update it told me:
integrity system corrupted
You will not be able to get any future updates.
Go to the store and official rom will be installed
Something like this .. Do you see this aswell?
Click to expand...
Click to collapse
This is normal with bootloader unlocked.
View attachment 4793287

xt1970-3 touch not working
i got a xt1970-3 from customer and touch is not working, i tried to flash with fastboot " XT1970-3_KANE_RETEU_9.0_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" the same version in phone, i flashed logo.bin, boot.img, system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2, system.img_sparsechunk.2, system.img_sparsechunk.3, system.img_sparsechunk.4, system.img_sparsechunk.5, system.img_sparsechunk.6, system.img_sparsechunk.7, system.img_sparsechunk.8, system.img_sparsechunk.9, system.img_sparsechunk.10, system_other.img_sparsechunk.0, system_other.img_sparsechunk.1, system_other.img_sparsechunk.2,
and now phone in bootloop mode, please i want to known how to flash this again

rizni said:
i got a xt1970-3 from customer and touch is not working, i tried to flash with fastboot " XT1970-3_KANE_RETEU_9.0_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" the same version in phone, i flashed logo.bin, boot.img, system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2, system.img_sparsechunk.2, system.img_sparsechunk.3, system.img_sparsechunk.4, system.img_sparsechunk.5, system.img_sparsechunk.6, system.img_sparsechunk.7, system.img_sparsechunk.8, system.img_sparsechunk.9, system.img_sparsechunk.10, system_other.img_sparsechunk.0, system_other.img_sparsechunk.1, system_other.img_sparsechunk.2,
and now phone in bootloop mode, please i want to known how to flash this again
Click to expand...
Click to collapse
This is how I flash full firmware without wiping userdata.
Code:
fastboot flash pit diskmap.pit
fastboot flash fwbl1 fwbl1.nbl1.bin
fastboot flash ldfw_a ldfw.bin
fastboot flash ldfw_b ldfw.bin
fastboot flash keystorage_a keystorage.bin
fastboot flash keystorage_b keystorage.bin
fastboot flash bootloader_a bootloader.bin
fastboot flash bootloader_b bootloader.bin
fastboot flash modem_a modem.bin
fastboot flash vbmeta_a vbmeta.img
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot flash logo_a logo.bin
fastboot flash dtbo_a dtbo.img
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.10
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_other.img_sparsechunk.0
fastboot flash system_b system_other.img_sparsechunk.1
fastboot flash system_b system_other.img_sparsechunk.2
fastboot fastboot flash vendor_a vendor.img
If you want to wipe userdata you could just add "fastboot erase userdata" at the end.
If that won't work it's probably broken digitizer or something.

thank you for quick guide, the phone is on now but the touch not working, it must be something to do with hardware
thank you

luisjoseb said:
Good news, motorola anounced the July update for the Motorola One Vision in his blog.
https://support.motorola.com/rola/e...family/motorola-one-vision/documents/MS141417
This update includes the july 1 security update
I don't know the delay but today in August 1 the update is available
Click to expand...
Click to collapse
I got the update yesterday

wtf
tys0n said:
This is normal with bootloader unlocked.
View attachment 4793287
Click to expand...
Click to collapse
I just noticed that new update is out.. so I tried click to update and woala it works.
OEM unlocked..
So with bootloader unlocked you are still able to get updates..

ᕙ(⇀‸↼)ᕗ said:
I just noticed that new update is out.. so I tried click to update and woala it works.
OEM unlocked..
So with bootloader unlocked you are still able to get updates..
Click to expand...
Click to collapse
There is no update for me
And Google Duo not work

ed.shevsky said:
There is no update for me
And Google Duo not work
Click to expand...
Click to collapse
i dont use duo, but i tried to root it and failed.. so i flashed stock boot.img
then tried to update
Maybe that flashed boot.img helped it or IDK.
you can try it- find your firmware
download it - extract it- find boot.img- place it in your home folder
use fastboot (instal adb tools and drivers ) with command (fastboot flash boot boot.img)
your phone must be in download mode - (power off, then press power and volume down button)
Is it avaible for your country?

ᕙ(⇀‸↼)ᕗ said:
i dont use duo, but i tried to root it and failed.. so i flashed stock boot.img
then tried to update
Maybe that flashed boot.img helped it or IDK.
you can try it- find your firmware
download it - extract it- find boot.img- place it in your home folder
use fastboot (instal adb tools and drivers ) with command (fastboot flash boot boot.img)
your phone must be in download mode - (power off, then press power and volume down button)
Is it avaible for your country?
Click to expand...
Click to collapse
Sorry, my fault. My phone is locked, so I don't need to flash boot.img
May be you know a method to force OTA update?
And about Google Duo. The program stop working after Play Market version updated. Once I fix it by factory reset. But I don't want do it every time

ᕙ(⇀‸↼)ᕗ said:
I just noticed that new update is out.. so I tried click to update and woala it works.
OEM unlocked..
So with bootloader unlocked you are still able to get updates..
Click to expand...
Click to collapse
Ok nice. Still didn't work for me but I'm flashing it with fastboot now instead.

ᕙ(⇀‸↼)ᕗ said:
i dont use duo, but i tried to root it and failed.. so i flashed stock boot.img
then tried to update
Maybe that flashed boot.img helped it or IDK.
you can try it- find your firmware
download it - extract it- find boot.img- place it in your home folder
use fastboot (instal adb tools and drivers ) with command (fastboot flash boot boot.img)
your phone must be in download mode - (power off, then press power and volume down button)
Is it avaible for your country?
Click to expand...
Click to collapse
Did you also get error about "too many links" when trying to flash magisk patched boot?

Question After install TWRP stuck in fastboot

hello i have big problem.
i unlocked bootloader with command fastboot flashing unlock / the show me unlock bootloader / Write YES
unlocked done, after unlock bootloader wipe data.
Then i try install custom TWRP..i download latest TWRP,then restart mobile to fastboot ..fastboot devices show me device,and i try
fastboot flash recovery recovery.img (show mi Failed remote: (recovery_a) No such partition
so next i try next commands:
fastboot getvar current-slot
fastboot set_active other
fastboot flash boot recovery.img /done
everithing see normally done without any problems.
Reboot phone and there its,,reboot in to fastboot. Mobile not starting im stuck in fastboot.
Can you help me please?

Merlousek said:
hello i have big problem.
i unlocked bootloader with command fastboot flashing unlock / the show me unlock bootloader / Write YES
unlocked done, after unlock bootloader wipe data.
Then i try install custom TWRP..i download latest TWRP,then restart mobile to fastboot ..fastboot devices show me device,and i try
fastboot flash recovery recovery.img (show mi Failed remote: (recovery_a) No such partition
so next i try next commands:
fastboot getvar current-slot
fastboot set_active other
fastboot flash boot recovery.img /done
everithing see normally done without any problems.
Reboot phone and there its,,reboot in to fastboot. Mobile not starting im stuck in fastboot.
Can you help me please?
Click to expand...
Click to collapse
In other Treble (a/b slots) based phones, the recovery is built into the boot rom. Likely you will need to re-flash the boot.img. That's what I would try first.

numbawon said:
In other Treble (a/b slots) based phones, the recovery is built into the boot rom. Likely you will need to re-flash the boot.img. That's what I would try first.
Click to expand...
Click to collapse
so what can i do? i dont have stock recovery,and twrp recovery dont start, what fastboot command can i try to repair? only what i have its global rom downloaded from nubia homepage but i dont now how to flash stock rom and repair all this i try miflash tool,but mi flash tool not support zip formats

You are going to need extract the global rom
Follow these instructions
Extract Android OTA Payload.bin File using Payload Dumper Tool
Learn how to dump and extract Android OTA Payload.bin file to get the boot.img (for rooting with Magisk), vendor.img, and other other partition images.
www.thecustomdroid.com
Once extracted, you should then be able to fastboot flash boot_(a or b) boot.img

numbawon said:
You are going to need extract the global rom
Follow these instructions
Extract Android OTA Payload.bin File using Payload Dumper Tool
Learn how to dump and extract Android OTA Payload.bin file to get the boot.img (for rooting with Magisk), vendor.img, and other other partition images.
www.thecustomdroid.com
Once extracted, you should then be able to fastboot flash boot_(a or b) boot.img
Click to expand...
Click to collapse
okey,,its look so verry hard for me so only way for me its wait for nubia unbrick tool for Red magic 6 like unbrick tool for red magic 5.

Merlousek said:
okey,,its look so verry hard for me so only way for me its wait for nubia unbrick tool for Red magic 6 like unbrick tool for red magic 5.
Click to expand...
Click to collapse
Several of us are in the waiting game for the unbrick tool at this point.

i try bumper what you send me but another im stuck here

Merlousek said:
i try bumper what you send me but another im stuck here
Click to expand...
Click to collapse
I'll see if I can get it all extracted for you and post it someplace. I've not done it myself, I just knew where the information was.

can do for me anybody download official rom V312 https://help.redmagic.gg/hc/en-us/articles/900006829463-RedMagic-6
and extract payload.bin via payload bumper all files and reupload for me please?
i need it for flash stock room via MIflash
Thanks for help.

Merlousek said:
can do for me anybody download official rom V312 https://help.redmagic.gg/hc/en-us/articles/900006829463-RedMagic-6
and extract payload.bin via payload bumper all files and reupload for me please?
i need it for flash stock room via MIflash
Thanks for help.
Click to expand...
Click to collapse
RedMagic6-6pro - Google Drive
drive.google.com
I've extracted both versions of the rom. The "output" folder in their respective paths contains all the extracted img files. All files are included for completeness.

numbawon said:
RedMagic6-6pro - Google Drive
drive.google.com
I've extracted both versions of the rom. The "output" folder in their respective paths contains all the extracted img files. All files are included for completeness.
Click to expand...
Click to collapse

thank you so much,and i have last question,,i try flash it with miflash,,boot on edl,i see device but mi flash say couldnt find flash script,, so what program use for flashing all files?

Merlousek said:
thank you so much,and i have last question,,i try flash it with miflash,,boot on edl,i see device but mi flash say couldnt find flash script,, so what program use for flashing all files?
Click to expand...
Click to collapse
Just use fastboot. Forget mi tool.

bs3pro said:
Just use fastboot. Forget mi tool.
Click to expand...
Click to collapse
what? fastboot? i have extracted all files from phyton like boot.img , system.img ... and what fastboot do you means?
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
you mean this fastboot commands?
and flash all files from stock recovery in fastboot?

bs3pro said:
Just use fastboot. Forget mi tool.
Click to expand...
Click to collapse
what? fastboot? i have extracted all files from phyton like boot.img , system.img ... and what fastboot do youmeans?
fastboot flash system system.img
fastboot flash recovery recovery.img
like that?

another error when i try flash all files from fastboot

Thanks..i try this commands on screenshot in previous reply sometimes error but fastboot flash boot boot.img works and my nubia red magic 6 its on ALIVE..Thanks all for help, You are best.

Merlousek said:
Thanks..i try this commands on screenshot in previous reply sometimes error but fastboot flash boot boot.img works and my nubia red magic 6 its on ALIVE..Thanks all for help, You are best.
Click to expand...
Click to collapse
Nice job!

Merlousek said:
hello i have big problem.
i unlocked bootloader with command fastboot flashing unlock / the show me unlock bootloader / Write YES
unlocked done, after unlock bootloader wipe data.
Then i try install custom TWRP..i download latest TWRP,then restart mobile to fastboot ..fastboot devices show me device,and i try
fastboot flash recovery recovery.img (show mi Failed remote: (recovery_a) No such partition
so next i try next commands:
fastboot getvar current-slot
fastboot set_active other
fastboot flash boot recovery.img /done
everithing see normally done without any problems.
Reboot phone and there its,,reboot in to fastboot. Mobile not starting im stuck in fastboot.
Can you help me please?
Click to expand...
Click to collapse
What TWRP did you install? Make sure you're downloading a TWRP that's available for this device. So far, to my knowledge, there isn't a TWRP recovery for this device yet.

Hello there, how did u just unlock bootloader by fastboot command? didn't use OEM unlock option on dev setting?
Btw can you share me your twrp that you used?
I need it so badly my rom bugged stuck at google account setup