Hi, i'm glad to present you AOSP 8.1 for Sony XZ1 Compact. This ROM was compiled from sources and packed in .zip archive for simply installing via TWRP.
Features:
* pure android with latest security patch
* working Google Camera Mod HDR+
How-to:
* download ROM and push in your phone
* reboot in TWRP, make full wipe and install this ROM
* TURN OFF your phone
* install OEM files
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v14_yoshino.img
* turn on your phone
* enjoy
Download (ROM, gapps, OEM):
HERE
Thanks to:
@modpunk
@SuperR.
@jerpelea
@Deic
Is this ROM DRM patched already so that I can get my camera working perfectly?
Boeing747x said:
Is this ROM DRM patched already so that I can get my camera working perfectly?
Click to expand...
Click to collapse
This rom not support drm keys, because used different libs & app. You can use gcam mod with hdr+ and get good photos
Sent from my Sony Xperia XZ1 Compact using XDA Labs
Stuck in bootloop...
Thanks for the great work!
Is there any 120hz option in the settings?
So far, after following your instructions, I've been stuck on the Android logo on boot.
Any suggestions? This is flashing from stock firmware 12.75, factory resetting through TWRP, flashing aosp.zip, shutting the phone off, fastboot flashing the other yoshino img, and restarting.
Excited to see where this goes! Esp. once the fingerprint issues are sorted out.
Can add md5?Because the file size of the file I downloaded and Google Drive is different
wow~Great! but is the photo better than before(Sony ROM)?
Thread cleaned
Keep on topic and English only please.
Great ROM, however, I'm noticing you can't update the system webview from the one that is included (it's version 61.something?).
I've tried installing Chrome / Android System Webview / etc and changing the Webview Implemetation in Developer Options to one of them instead, but they don't show up in the options.
I've also tried installing those applications to system through the OpenGapps full installer, but then no options at all show up under Webview Implementation (it appears the old one is removed but the new one is not recognized).
I did some research and found this:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.x
It would seem before the ROM is built, it has to have specified compatible webviews. Is there any way around this right now?
Thanks so much!!
Thread updated
new_20.03.18
* added support chrome webview & google webview like HERE
Enjoy!
awesome, thanks!
Thread updated
new_21.03.18
* replace aosp keyboard to lineage keyboard
* fixed deskclock (alarm now work)
Thanks to @lineage Dev Teams
Support you，thank
Thread updated
new_23.03.18
* fix gesture input in keyboard
* added TTL support
Pic samples
Can anyone upload samples of how the camera performs with hdr+?
Thanks again to the developer!
Stuck on Boot. Only shows Android Logo. Tried four times with new installation. Any idea?
Ebbl said:
Stuck on Boot. Only shows Android Logo. Tried four times with new installation. Any idea?
Click to expand...
Click to collapse
Me too. It doesn´t work. I tried it four or five times but it won´t boot.
What I did:
I entered TWRP and wiped (Advanced wipe-> System, Dalvik, cache, Data)
I installed Zip and Gapps and shutdown the phone.
I installed software via Fastboot
I started the phone and it stuck on android logo.
Ebbl said:
Stuck on Boot. Only shows Android Logo. Tried four times with new installation. Any idea?
Click to expand...
Click to collapse
SkyHigh76 said:
Me too. It doesn´t work.
Click to expand...
Click to collapse
One thing that come in my mind is your encrypted data, may be this is a problem. I'm disable this long time ago and don't use it. You can try to disable this too. After installing firmware FORMAT your data via twrp, but it delete ALL files from your internal storage.
Sent from my Sony Xperia XZ1 Compact (AOSP) using XDA Labs
A great big thanks to you for this! Especially when it comes to getting Gcam HDR+ going on this. Once fingerprint is working I can definitely see using this as a daily driver...
One question, when you use Gcam HDR+ on this, does it still display the early stock image distortion from the camera? Not that wide-angle fisheye effect, but the actual wavey lines and such? I imagine sony's fix was proprietary algorithms in the stock sony camera app...
Not sure if this is still relevant, but this post on an AOSP (for XZ) thread mentions that the fingerprint issue (exactly same, works until reboot) is due to magisk v15, where a beta version makes it work properly. Maybe try different magisk versions?
maidguitar said:
A great big thanks to you for this!
Click to expand...
Click to collapse
No, fingerprint had issue by itself not by magisk. Yes gcam had some distorsing on images.
Matt8686 said:
Can anyone upload samples of how the camera performs with hdr+?
Thanks again to the developer!
Click to expand...
Click to collapse
https://4pda.ru/forum/index.php?showtopic=844131&view=findpost&p=71326137
Related
Hello, just wanted to share this package, it contains CameraNext with all the features working (i added libraries too, so everything should work except features with hardware limitations).
You can find all the camera informations/features here:
http://www.androidcentral.com/looking-camera-features-cyanogen-os
I made a package that contains a backup script, so it won't be deleted when you update your CyanogenMod ROM, i didn't test it on other ROMs because i only use CM12.1, so if you want to try it on a different AOSP ROM i can't give you any support.
This package won't replace your stock Camera app/libraries, that will still work as usual.
DOWNLOAD:
CameraNext
I can't revert nor add any change because the app is prebuilt and closed-source
Tested and working on:
- CM12.1
- SlimLP(5.1.1)
- ...
CHANGELOG:
11/10/2015
- Removed GalleryNext (you can find it in the C-Apps package https://cyngn.com/c-apps)
- Updated CameraNext to 2.0.005 from latest YU Yureka plus factory image
-- Removed HFR entry (slow motion)
-- Removed focus mode entry (automatic or continuous), it's now continuous by default
- Moved the package from /priv-app to /app
- Moved libraries from /lib to /CameraNext/lib/arm
I had to keep 2.0.004 libraries (from OPO) because YU Yureka plus uses 64 bit libraries and they're not working on 32 bit systems
HOW TO REMOVE THE CYANOGEN CAMERA?
The easiest way is explained here: http://forum.xda-developers.com/showpost.php?p=64641032&postcount=28
slow motion doesn't work mention that in OP
edit: HFR (slow motion) entry removed with 2.0.005 update
I've installed this camera app and... woow... it is really what i was looking for!!!! Thank you guy!!! Now I have everything: panorama working (feature missing in standard CM 12 camera app, in google camera and non working in many other apps I tried!), HDR, continous shots (even this missing in standard cm camera), good camera quality (better than stock motorola app!)... and maybe, in future, we'll have slowmo working!!!! WOOOOOW
It works with stock rom?
Funciona con rom stock lollipop ?
kuzo said:
It works with stock rom?
Funciona con rom stock lollipop ?
Click to expand...
Click to collapse
I don't know, sorry
Edit: No, it's a 5.1+ app
ivanhoe76 said:
maybe, in future, we'll have slowmo working!!!!
Click to expand...
Click to collapse
As i mentioned in post #3, it can't work, atleast not using this Camera application.
HDR
Thanks for the APP!
But I've trouble with the HDR. It Start working and doesn't stop.
Other funktion work propper.
Any Idea?
Martin_MotoG2014 said:
Thanks for the APP!
But I've trouble with the HDR. It Start working and doesn't stop.
Other funktion work propper.
Any Idea?
Click to expand...
Click to collapse
Swipe up or down to select the automatic mode again
Can i flash it on Identity Crisis 5.1 rom?
EDIT: nope, it doesnt work
Chaninoza said:
Can i flash it on Identity Crisis 5.1 rom?
EDIT: nope, it doesnt work
Click to expand...
Click to collapse
I don't think it will work on any stock motorola ROM
fonz93 said:
As i mentioned in post #3, it can't work due to hardware limits, atleast using this Camera application.
Click to expand...
Click to collapse
I read somewhere in this forum that they're working on making functional slowmo on custom rom since in stock rom motorola camera has it!!
ivanhoe76 said:
I read somewhere in this forum that they're working on making functional slowmo on custom rom since in stock rom motorola camera has it!!
Click to expand...
Click to collapse
But it's not high frame rate, because our camera framerate is max 30 fps, Cyanogen Camera only support slow motion with 60+ fps
fonz93 said:
But it's not high frame rate, because our camera framerate is max 30 fps, Cyanogen Camera only support slow motion with 60+ fps
Click to expand...
Click to collapse
OOOPS sorry, didn't know about it....
How do you guys access HDR? It's not showing for me
Nevermind, it was translated to ARD
Great.
Install Failed
I have an LG G3 with Cyanogenmod 12.1 and i just get installed failed when i try and flash the .zip. Any ideas?
Erock2k4 said:
I have an LG G3 with Cyanogenmod 12.1 and i just get installed failed when i try and flash the .zip. Any ideas?
Click to expand...
Click to collapse
The .zip hasn't any assert so it should work fine, i don't know why happens that to you
fonz93 said:
The .zip hasn't any assert so it should work fine, i don't know why happens that to you
Click to expand...
Click to collapse
Yeah I figured it out. It seems like the Cyanogenmod Recovery didnt like it. switched to TWRP and it flashed fine.
New update available.
CHANGELOG:
- Removed GalleryNext
- Updated CameraNext to 2.0.005 from latest YU Yureka plus factory image
-- Removed HFR entry (slow motion)
-- Removed focus mode entry (automatic or continuous), it's now continuous by default
(I can't revert nor add any change because the app is prebuilt and closed-source)
- Moved the package from /priv-app to /app
- Moved libraries from /lib to /CameraNext/lib/arm
I had to keep 2.0.004 libraries (from one plus one) because YU Yureka plus uses 64 bit libraries and they're not working on 32 bit systems
Nice work. Working great on motoG 2nd gen.
Hey guys!
I'm learning Android app development and decided to put the skills I learnt to some use, so here it is-
This app is for people like me who prefer the higher exposure time of the Stock HAL in low light (brighter and less noisy photos), but at the same time want to use all the features of Sultan's HAL like 4K video, etc.
It can also be used if you want to compare the two HALs or decide to revert to Stock in the future (no need to dirty flash your ROM now!).
Features:
Switch between Stock and Sultan's HAL on the fly (no reboot required!)
Backup and restore Stock HAL files (no need of a revert zip now)
Launch your default Camera from within the app
Should work on all ROMs 5.1.1 and above (EDIT: It doesn't seem to be working on OOS. Will try to fix it in the near future).
Will even work when Sultan updates his HAL
WARNING: This app is designed to run only on a rooted OPX running Android 5.1.1 and above. It might break your camera if used on any other phone!
Installation Instructions:
Install the APK file
Dirty flash your current ROM (only if you have already flashed Sultan's HAL)
Press the Backup button in the app (Status should say "Not Installed" at this time)
Flash Sultan's HAL zip from recovery
Usage:
If you're performing a clean ROM install in the future, be sure to hit the backup button within the app before flashing Sultan's HAL.
If Sultan releases an update to his HAL, be sure to switch to his HAL from within the app before flashing the updated zip.
If for whatever reason you encounter any issues, dirty flash your ROM and follow the Installation instructions again. This should fix them.
Credits:
@Sultanxda for his awesome HAL!
Note: Neither Stock HAL files nor Sultan's HAL files are included in this app
Any bug fixes, feature requests and reviews are always welcome (I'll be working on it only when I have free time).
Finally, it goes without saying- I'm not responsible for any damage whatsoever caused to your device by using this app!
XDA:DevDB Information
Camera HAL Switcher, App for the OnePlus X
Contributors
ashwinpilgaonkar
Source Code: https://github.com/ashwinpilgaonkar/CamHALChanger
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-25
Created 2016-05-25
Last Updated 2016-05-25
XDA:DevDB Information
Camera HAL Switcher, Device Specific App for the OnePlus X
Contributors
ashwinpilgaonkar
Version Information
Status: Stable
Created 2016-05-25
Last Updated 2016-08-17
Changelog:
26th May, 2016 (v1.0)
- Initial Build
28th May, 2016 (v1.01)
- Fixed issue in which camera was broken after switching to Stock HAL.
OMG awesome mate!!
But where's the link??
animesh1558 said:
OMG awesome mate!!
But where's the link??
Click to expand...
Click to collapse
Downloads tab at the top of OP.
Really great work @ashwinpilgaonkar This will come in handy to a vast majority of people !
Great application and idea, good job, but for some reason when switching to stock HAL my camera apps stop working. I was following your instructions and flashed HAL after installing the app and backuping the old HAL. Any suggestions?
Wht if im usimg sultanrom?
WOW
nice idea.
Love it!
LolHacker17 said:
Wht if im usimg sultanrom?
Click to expand...
Click to collapse
No, this wont work if you're using Sultan's ROM as it comes with the custom HAL pre installed. You would have to manually copy the Stock HAL files from CM13 for it to work.
mindphuq said:
Great application and idea, good job, but for some reason when switching to stock HAL my camera apps stop working. I was following your instructions and flashed HAL after installing the app and backuping the old HAL. Any suggestions?
Click to expand...
Click to collapse
Does this only happen when switching to Stock HAL? It works fine for me.
Which ROM are you using?
Try dirty flashing it and following the instructions once again.
where does it backup stock camera hal to?
jgcmurray said:
where does it backup stock camera hal to?
Click to expand...
Click to collapse
It creates a copy with the extension of .stock in the same directory where it is originally located.
ashwinpilgaonkar said:
No, this wont work if you're using Sultan's ROM as it comes with the custom HAL pre installed. You would have to manually copy the Stock HAL files from CM13 for it to work.
Does this only happen when switching to Stock HAL? It works fine for me.
Which ROM are you using?
Try dirty flashing it and following the instructions once again.
Click to expand...
Click to collapse
It only works with Sultan HAL and when switching to stock HAL, camera stops working. I am on CM13 Official latest nightly with bluspark kernel, xposed and supersu 2.65. First time I've tried it I had OOS 3.0.1 camera installed from the other thread. Then I dirty flashed without installing that camera and tried your app with the stock google camera from opengapps, still no luck. I really, really want this working on my phone
mindphuq said:
It only works with Sultan HAL and when switching to stock HAL, camera stops working. I am on CM13 Official latest nightly with bluspark kernel, xposed and supersu 2.65. First time I've tried it I had OOS 3.0.1 camera installed from the other thread. Then I dirty flashed without installing that camera and tried your app with the stock google camera from opengapps, still no luck. I really, really want this working on my phone
Click to expand...
Click to collapse
I have the same ROM and kernel as you and it's working fine for me. It doesn't look like anyone else is having any issues either.
Send me a screen record of the entire process. I maybe able to figure out whats going wrong.
ashwinpilgaonkar said:
I have the same ROM and kernel as you and it's working fine for me. It doesn't look like anyone else is having any issues either.
Send me a screen record of the entire process. I maybe able to figure out whats going wrong.
Click to expand...
Click to collapse
This is great in theory and i've waited for something like this to hopefully be made in which I am very greatful for. However, I'm on rooted OOS 2.2.0 with Blue spark and the same issue occurs for me - It says action performed successfully when applying the Stock HAL, but when launching the camera app it says "Unknwon error".
I have tried clearing cache and data for the stock camera app, but no luck.
Matthius said:
This is great in theory and i've waited for something like this to hopefully be made in which I am very greatful for. However, I'm on rooted OOS 2.2.0 with Blue spark and the same issue occurs for me - It says action performed successfully when applying the Stock HAL, but when launching the camera app it says "Unknwon error".
I have tried clearing cache and data for the stock camera app, but no luck.
Click to expand...
Click to collapse
Same problem as him - "Unknown Error" in OOS camera and "Can't connect to the camera" in google camera. Tried cleaning cache aswell, even tried with cleaning davlik/cache after installing sultan HAL.
For some reason my screen recorder cuts the videos before I can't record everything, so I can't provide a video. I can extract logs or something if you need them?
Mindphuq said:
Same problem as him - "Unknown Error" in OOS camera and "Can't connect to the camera" in google camera. Tried cleaning cache aswell, even tried with cleaning davlik/cache after installing sultan HAL.
For some reason my screen recorder cuts the videos before I can't record everything, so I can't provide a video. I can extract logs or something if you need them?
Click to expand...
Click to collapse
Yeah my recorder stops too. Here's error though after applying https://youtu.be/ivviaicSa4I
Maybe a direct option to clear "camera App" data (not onlycache) could help.
I'm trying the MOD right now.
Edit : same problem for me.
I had to wipe camera app data, , launch it from drawer and then it worked.
Without that, camera app couldn't be launched from Hal Switcher.
Kéno40 said:
Maybe a direct option to clear "camera App" data (not onlycache) could help.
I'm trying the MOD right now.
Edit : same problem for me.
I had to wipe camera app data, , launch it from drawer and then it worked.
Without that, camera app couldn't be launched from Hal Switcher.
Click to expand...
Click to collapse
I just tried this, still doesn't work for me unfortunately.
It doesn't matter what app it is so therefore I presume it's not just the stock camera app it's to do with something technical that can hopefully be fixed with a bit of tweaking.
Matthius said:
I just tried this, still doesn't work for me unfortunately.
It doesn't matter what app it is so therefore I presume it's not just the stock camera app it's to do with something technical that can hopefully be fixed with a bit of tweaking.
Click to expand...
Click to collapse
Doesn't work with clearing app data for me aswell.
Matthius said:
I just tried this, still doesn't work for me unfortunately.
It doesn't matter what app it is so therefore I presume it's not just the stock camera app it's to do with something technical that can hopefully be fixed with a bit of tweaking.
Click to expand...
Click to collapse
Root ok on your app?
Kéno40 said:
Root ok on your app?
Click to expand...
Click to collapse
What do you mean?
Nothing on the app seems to indicate if root access is okay.
Sent from Tapatalk on the OPX
Hi,
Here is my second version of iniro_mxp_rom based on XT1562 MPD24.107-70 (Android 6.0.1).
It is debloated but it has Google Apps, moto display and miracast working. FMRadio too and more stuff.
It has xposed installed.
Bootanimation and logo are changed to simplest one.
This rom is rooted.
The kernel is Phoenix Kernel to have notification led enabled by default.
Also it has more ringtones.
Credits and thanks:
eskamhl's for Marshmallux
minimale_ldz
AnoopKumar for Phoenix Kernel
C. Ghisler - Total Commander creator
Klaus Weidner - Hacker's Keyboard creator
TeslaCoil - Nova Launcher creator
Installation requisites:
-Custom Recovery (TWRP 3.0.2-r3 recommended)
Installation:
-Wipe /system /data /cache /dalvik-cache
-Install .zip
-Reboot and enjoy
Download:
iniro_mxp_rom_6.0.1_v1.2:
https://drive.google.com/file/d/0B33xcE352phbZFk2eGRPX3ZjUjA/view?usp=drivesdk
Extras:
Notification Led enabler: https://drive.google.com/open?id=0B33xcE352phbRFVFN3BmUVdnSlE
Notification Led disabler: https://drive.google.com/open?id=0B33xcE352phbYV9NaFdsY21TTjA
Moto display enabler: https://drive.google.com/open?id=0B33xcE352phbRVZHTU1HamFEVFk
Moto display disabler: https://drive.google.com/open?id=0B33xcE352phbcVQ3Uk14d2ZzV0E
24.107-70 baseband: https://drive.google.com/open?id=0B33xcE352phbNkIxeWZWV2pKUXc
VoLTE fix: https://drive.google.com/open?id=0B33xcE352phbaUdhdnpqQ09ldFU
Stock kernel: iniro_mxp_rom_MPD24.107-70-Stock_Kernel:
https://drive.google.com/open?id=0B33xcE352phbbEQyRjg1a3JnSDg
What's the differces between yours and this
http://forum.xda-developers.com/moto-x-play/development/rom-stock-debloated-rom-6-0-1-t3432821
This rom is a flashable zip and not a twrp backup. Base rom is the same in both roms. Preinstalled apps,... are not the same.
link not found
diegomartinezlovey said:
link not found
Click to expand...
Click to collapse
Thx for advice. Now is up
Sorry, but the link still doesn't seem to be working.
Sent from my XT1562 using Tapatalk
So Dual SIM?
I installed the ROM on my Indian version of x play 1562 ds. But my phone didn't boot. It did not proceed beyond the android screen. So I had to revert back to my backup. I am on the same version of stock firmware.
I will install this rom, Thanks!
It is Asia dual sim version. Please check link again, it is working for me. Thx.
situ1962 said:
I installed the ROM on my Indian version of x play 1562 ds. But my phone didn't boot. It did not proceed beyond the android screen. So I had to revert back to my backup. I am on the same version of stock firmware.
Click to expand...
Click to collapse
Do you wipe before flash? When it boots, boots two times, one for splash and one more for the rom. First rom boots takes some time.
Thanks a lot, that's what I'm looking for.
Just flashed it a few hours back, and it works like a charm on my Middle Eastern XT1562 dual sim.
Performance is smoother than stock, no doubt. Gonna use it and see how it goes with the battery backup.
A little issue happens here (no big deal to me) is Moto Display. It is ON by default and I couldn't find any options in app drawer as an app, nor in device settings. I looked into files and I found it in priv-app, copied it to storage and reinstall it, then I got it FC twice, I rebooted then again I got it FC twice.
Booted into recovery and deleted the Moto Display folder, reboot into system then got FC twice, eventually its not working anymore (that's what I want), so the Moto Display and FC are no biggies.
Good job bud, I'll feedback soon.
iniro said:
Do you wipe before flash? When it boots, boots two times, one for splash and one more for the rom. First rom boots takes some time.
Click to expand...
Click to collapse
Yes,I wipe as mentioned in the op.But at the end of wiping process a red error message is displayed 'unable to mount storage'.Is it the issue or is it normal?
Also,how much time it should take for the initial booting?
Edit: Problem solved.I wiped the phone from recovery and then it booted ok.But it seems the rom is not rooted.So I had to flash supersu 2.62 version.Now I shall try it for a couple of days and shall report here.Thanks for the rom.
Edit 1:Scrolling is not smooth as it should be.It is a bit laggy.Also led not working.How to enable it?
volte support?
is this rom having the update of volte ?
Two things I want to disable:
1/ LED notifications
2/ Moto Display
Any help please?
Zeez Saud said:
Two things I want to disable:
1/ LED notifications
2/ Moto Display
Any help please?
Click to expand...
Click to collapse
I updated OP with extra links:
Extras:
Notification Led enabler: https://drive.google.com/open?id=0B33xcE352phbRFVFN3BmUVdnSlE
Notification Led disabler: https://drive.google.com/open?id=0B33xcE352phbYV9NaFdsY21TTjA
Moto display enabler: https://drive.google.com/open?id=0B33xcE352phbRVZHTU1HamFEVFk
Moto display disabler: https://drive.google.com/open?id=0B33xcE352phbcVQ3Uk14d2ZzV0E
Thx!
Rahil0597 said:
is this rom having the update of volte ?
Click to expand...
Click to collapse
If Asian DS MPD24.107-70 have update of VOLTE, this one too. But I dont know how to check it. Sorry. If you know how please I will take a look for it.
situ1962 said:
Yes,I wipe as mentioned in the op.But at the end of wiping process a red error message is displayed 'unable to mount storage'.Is it the issue or is it normal?
Also,how much time it should take for the initial booting?
Edit: Problem solved.I wiped the phone from recovery and then it booted ok.But it seems the rom is not rooted.So I had to flash supersu 2.62 version.Now I shall try it for a couple of days and shall report here.Thanks for the rom.
Edit 1:Scrolling is not smooth as it should be.It is a bit laggy.Also led not working.How to enable it?
Click to expand...
Click to collapse
Once rom is installed is necessary to update supersu binaries. Thx!
iniro said:
Once rom is installed is necessary to update supersu binaries. Thx!
Click to expand...
Click to collapse
OK.Thanks.The led works for notifications only,not for charging.Can it be enabled?After some time the rom is running smoothly. I think it took time to optimize.
This version of Indian firmware has inbuilt VoLTE.By dialing *#*#4636#*#* we can enter to settings menu.There is an entry named TURN OFF VOLTE PROVISION FLAG.Since VoLTE is mentioned,I think it is present.
thanks for building this rom. fast and smooth.
i wanted to get supersu updated to 2.76, but after flash it in TWRP, the older version supersu disappeared and new version not installed,
any idea, please.
These roms are stock, have the most common apps optimized by Sony kept in /system, all common functions are enabled.
What's noticeable is that I get 8 hr sot on Oreo with stamina performance mode, haven't tested yet, but Nougat is much lighter, it seems.
version 2 will have google apps completely removed and replaced with ''nanomod gapps'' https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928, it will be depend on a xposed module.
enable oem unlocking and unlock bootloader at sony website before doing anything
[N]
-stock 45.0.A.7.137
-debloat
-drm fix by storm included
(1.34gb) ver 1.0 : https://androidfilehost.com/?fid=746010030569968610
1. unpack https://drive.google.com/file/d/0B1zMbQ8-0A61WjVCUUdLUjJTcmc/view (credit by xperiasite.pl)
2. open partition.zip and extract contents to /partition
3. delete all .ta files in the MAIN folder only, to fix battery 0% bug and put newflasher in it and flash all https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
4. flash twrp
https://dl.twrp.me/maple/twrp-3.2.1-0-maple.img.html
fastboot flash recovery twrp-3.2.1-0-maple.img
4.1
extract boot.img from my zip
fastboot flash boot boot.img
5. install my zip
6. install magisk https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
7. Wipe cache and dalvik, reboot
[O] with adblock
-stock 47.1.A.12.75
-debloat
-drm fix by storm, baked the drm libs inside already
(1.9 gb) ver 1.0 : https://www.androidfilehost.com/?fid=673956719939834472
1. flash ftf 47.1.A.12.75 with flashtool
https://drive.google.com/file/d/1LQnMomh9YlEuE0cfewQGEwTqPb50qPNr/view?usp=drive_web
2. flash twrp
https://dl.twrp.me/maple/twrp-3.2.1-0-maple.img.html
fastboot flash recovery twrp-3.2.1-0-maple.img
boot into recovery -> volume down + power button, release when sony logo appears
3. flash my rom
4. flash xperifix.zip https://www.androidfilehost.com/?fid=890129502657597610
5. flash magisk https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
6. Xposed also works on .75, so you can flash it
7. Wipe cache and dalvik, reboot
Hi
I flash 47.1.A.12.75 Strange rom. Why you deleted themes Xperia? I can not log in to Facebook and Instagram on you rom. Lite version too. Do you blocked portals somehow?
waiting v2. thankssssssssss
---please delete this message---
was looking for 12.75 FTF (as it's the last Xposed compatible fw)
thought I found it...
https://forum.xda-developers.com/xz-premium/how-to/sony-xperia-xz-premium-firmware-t3707011
but his hosting is crazy, it just won't let you download anything for FREE
I'm hopeless
Indashio said:
Hi
I flash 47.1.A.12.75 Strange rom. Why you deleted themes Xperia? I can not log in to Facebook and Instagram on you rom. Lite version too. Do you blocked portals somehow?
Click to expand...
Click to collapse
then you just have to delete hosts in system/etc/hosts (or .old) it is part of adblocking
saved-j said:
---please delete this message---
was looking for 12.75 FTF (as it's the last Xposed compatible fw)
thought I found it...
https://forum.xda-developers.com/xz-premium/how-to/sony-xperia-xz-premium-firmware-t3707011
but his hosting is crazy, it just won't let you download anything for FREE
I'm hopeless
Click to expand...
Click to collapse
I posted a link in this thread for 8141
https://drive.google.com/file/d/1LQnMomh9YlEuE0cfewQGEwTqPb50qPNr/view
you need 8142?
rubensiooo said:
waiting v2. thankssssssssss
Click to expand...
Click to collapse
thanks for your support, in 2 weeks I will have done the new version
amakuramio said:
thanks for your support, in 2 weeks I will have done the new version
Click to expand...
Click to collapse
Your rom work fine. Thanksssss and greats from spain
amakuramio said:
I posted a link in this thread for 8141
https://drive.google.com/file/d/1LQnMomh9YlEuE0cfewQGEwTqPb50qPNr/view
you need 8142?
Click to expand...
Click to collapse
yes please. I would love the G8142 based on .75.
And, we all would love to know what exactly you have removed from the fw, except for the Facebook app, and what you have added (if any).
To be 100% aware of the contents of the modification.
Waiting impatient v2 @amakuramio thanks and thanks
rubensiooo said:
Waiting impatient v2 @amakuramio thanks and thanks
Click to expand...
Click to collapse
It Will come eventually, I had no energy, but now I finally have solar power, and can boot up the pc ( ^ω^ )
Hi.
Thanks for your work~
Nouga Version..
Setup wizard...problem.
no keyboard..
and gogle play service error..
I don't enter main ui..
I need your help..
Dear. Could you please make it into a separate patch? So that one would not have to download the whole 1.9gb of your ROM, but only the necessary changes.
I highly appreciate and value your efforts.
saved-j said:
Dear. Could you please make it into a separate patch? So that one would not have to download the whole 1.9gb of your ROM, but only the necessary changes.
I highly appreciate and value your efforts.
Click to expand...
Click to collapse
Problem is for microg to work, xposed plus microg services and Google services to need to enabled from start otherwise bootloop, but I'm actually working on a small patch now
D daydream said:
Hi.
Thanks for your work~
Nouga Version..
Setup wizard...problem.
no keyboard..
and gogle play service error..
I don't enter main ui..
I need your help..
Click to expand...
Click to collapse
Hmm.. Mount system in twrp, go system privapp setup wizard folder and delete it?
amakuramio said:
Hmm.. Mount system in twrp, go system privapp setup wizard folder and delete it?
Click to expand...
Click to collapse
I have recovered only the data partitions from an existing backup.Then it became possible to enter the main ui.
However, a message stating that it is still starting.
xperia home,I installed it and it worked.
I installed Evernote app in that state and it does not work.
I installed Google keeps, but it was the same.
So, I installed the unlimited rom patch in xda and it worked.
I got full deodex rom.
I will try the Nano Droid.
Edit. I tried nanodroid. But I cant..
Sadly I have no ability..
GOOD NEWS EVERYONE I succeeded in making xposed work for g8141 g8142 on .179 firmware. I analyzed Chinese frameworks and such. Here is proof.
this mod will be released in 2 days. It is a new rom, basically, just flash it over any .179 firmware and no I cannot release it as patch, because the whole rom is build around the framework.
Just curious if fingerprint is working on this rom??
How can I remove adblocker??
I finally installed your nouga .137 rom
I like it. very very light!!!
I selected country japan or china
keyboard working..
your rom file
+ android webview file
+ xperia home file
I don't have play service error.
I entered main ui.
and
evernote good working..!!
thanks^^
do you have nouga v2 plan??
Disclaimer
Your warranty will be void
Some carriers' Terms of Service prohibit device modifications
Modifying will trip Samsung Knox and SafetyNet, so be aware that some apps will cease to work
I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FAILED ATTEMPTS AND OTHER CAUSES OF IMPROPER USAGE OF THIS GUIDE!Now that we got that out of the way, we can continue.
Unlocking the BootloaderUNLOCKING THE BOOTLOADER WILL ERASE ALL OF YOUR DATA!
Go into Settings > About Phone > Software Information
Find Build Number and quickly tap it 7 times. This will enable Developer Options
Find OEM Unlocking and USB Debugging options and enable them
Turn off the phone
Hold Volume Up and Volume Down while connecting your phone to a PC to boot into Download Mode
Read the Warning carefully to understand it and then if you want to continue press Volume Up
On the Unlock Bootloader screen, press and hold the Volume Up button one more time (This is the step that erases all of your data, if you don't want to do it, now is the time to turn back!)
After the automatic reboot, repeat steps 1. - 3. and make sure that OEM Unlocking is greyed out and enabled
Congratulations! You bootloader is now unlocked.
Flashing a Custom RecoveryCredit to @BlackMesa123 for this guide.
Rooting your Phone
Download the latest version of Magisk on your Computer
Follow the Official Installation Guide from Magisk developers
Flashing a GSI (Generic System Image)
Choose a GSI from this List
Power Off your phone and connect it to your Computer
Hold Volume Up and Power buttons, after the logo appears, release only the Power button, this will boot you into TWRP
Do a Wipe and transfer the GSI file from you Computer to your Phone
Click Install >Image Flashing, find your transferred GSI file and tap on it.
Toggle the System Image option and flash the file.
After flashing Format Data to be able to boot into your new System.
I know your Camera doesn't work, don't worry check out this Post to get it to work again.
Useful Resources
A52s bootloader/modem collection repository
OrangeFox Recovery
SafetyNet Fix for Magisk (Zygisk)
Custom ROMs: RayOS (One UI 4.1), NcX (One UI 5.0)
Mesa's Custom Kernel
Credit to @BlackMesa123 @Ryzen5950XT @ShaDisNX255 for the additional resources.
That's it! Thank you for following the guide and enjoy your unlocked Samsung.
This is very helpful thanks
Thank you for the guide. Here's some additional resources/changes that can be added in the post:
- A52s bootloader/modem collection repository
- OrangeFox Custom Recovery, same as TWRP but with a different UI
- SafetyNet and (some) Knox features can still work with the correct adjustments. See the SafetyNet fix for Magisk (Zygisk) or custom ROM's such as RayOS (One UI 4.1), NcX (One UI 5.0)
- Mesa's Custom Kernel, greatly improves device's performance
Hoping to see the list enhanced soon.
BlackMesa123 said:
Thank you for the guide. Here's some additional resources/changes that can be added in the post:
- A52s bootloader/modem collection repository
- OrangeFox Custom Recovery, same as TWRP but with a different UI
- SafetyNet and (some) Knox features can still work with the correct adjustments. See the SafetyNet fix for Magisk (Zygisk) or custom ROM's such as RayOS (One UI 4.1), NcX (One UI 5.0)
- Mesa's Custom Kernel, greatly improves device's performance
Hoping to see the list enhanced soon.
Click to expand...
Click to collapse
Thank you for the links, thread is now updated.
Quick question, with MCK, should I wipe everything before/after flashing and will it work with PE+ GSI?
kzyx said:
Thank you for the links, thread is now updated.
Quick question, with MCK, should I wipe everything before/after flashing and will it work with PE+ GSI?
Click to expand...
Click to collapse
You shouldn’t wipe anything when flashing the kernel. If the stock kernel works fine, I don’t see why mine shouldn’t
Everything is working perfectly, thanks for the guide. I installed the PixelExperience GSI but for some reason Fingerprint sensor is not working. The process is stuck on "Touch the sensor" and the sensor is not lighting up. Yes, I set the color of fingerprint sensor to White (and even tried all other colors).
I even have the following options checked
- Enable Extra Sensor
- Enable workaround for broken fingerprint sensor
- Enable workaround for white-ish screen
Any help will be appreciated, thanks.
Mian-786 said:
Everything is working perfectly, thanks for the guide. I installed the PixelExperience GSI but for some reason Fingerprint sensor is not working. The process is stuck on "Touch the sensor" and the sensor is not lighting up. Yes, I set the color of fingerprint sensor to White (and even tried all other colors).
I even have the following options checked
- Enable Extra Sensor
- Enable workaround for broken fingerprint sensor
- Enable workaround for white-ish screen
Any help will be appreciated, thanks.
Click to expand...
Click to collapse
I don't know what could be the issue, maybe try to google or try disabling and enabling the fingerprint lock again.
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Mian-786 said:
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Click to expand...
Click to collapse
Thanks for the feedback, have you tried any ROMs instead of GSIs?
You have links for them in this thread.
kzyx said:
Thanks for the feedback, have you tried any ROMs instead of GSIs?
You have links for them in this thread.
Click to expand...
Click to collapse
Nope, I tried to find a good custom rom for A52s but couldn't find any.
What about volte and hotspot on GSI pixel experience 13?
Mian-786 said:
I have tried few GSI Roms. Here is my summary:
Android 13
- AOSP, Android 13, No image with GAPPs pre-installed and cannot seem to install it. Tried NikGAPPs, and LiteGAPPs, both didn't work
- Google GSI, Android 13, same issue
- Pixel Experience, Android 13, GAPPs pre-installed but Fingerprint sensor won't get detected.
Android 12
- AOSP, Android 12, GAPPs pre-installed, Fingerprint sensor detected (changing color to white). Will stick to it unless there is an issue detected.
Click to expand...
Click to collapse
Thanks for your summary,
Is there any experience with MicroG on this device with AOSP 13?
7slaper said:
Thanks for your summary,
I'm on AOSP 13 now, but perhabs it's better to go back to 12. I'm very interested in the AOSP with the GAPPs pre-installed. Could you share a link to the file?
Click to expand...
Click to collapse
I got the image from AOSP under the official Android 12/12L section. You can find release here. The exact image I got is the system-squeak-arm64-ab-vndklite-gapps-secure.img.xz one since the standard gapps one came with an app called "superuser" which I couldn't seem to uninstall (I tried the scripts to remove supersu). This caused my banking apps to not run. That is why I installed the "secure" one and then installed Magisk and added my banking apps to the defylist.
Zhazhael said:
What about volte and hotspot on GSI pixel experience 13?
Click to expand...
Click to collapse
I think VoLTE was available as an option in one of the ROM I tested but I don't remember exactly. Currently AOSP 12 doesn't support it. Hotspot worked on every ROM just fine.
Mian-786 said:
I got the image from AOSP under the official Android 12/12L section. You can find release here. The exact image I got is the system-squeak-arm64-ab-vndklite-gapps-secure.img.xz one since the standard gapps one came with an app called "superuser" which I couldn't seem to uninstall (I tried the scripts to remove supersu). This caused my banking apps to not run. That is why I installed the "secure" one and then installed Magisk and added my banking apps to the defylist.
Click to expand...
Click to collapse
Hi Mian,
Thanks for your response. When I typed my question I realized that in the end I want to have and de-googled phone. So I changed my question in the direction of MicroG. I didn't expect you to be so quick with answering.
7slaper said:
Hi Mian,
Thanks for your response. When I typed my question I realized that in the end I want to have and de-googled phone. So I changed my question in the direction of MicroG. I didn't expect you to be so quick with answering.
Click to expand...
Click to collapse
I haven't tried MicroG in any of the ROM. I just to have as little Google apps as possible but if you do find a good guide, let me know, I will try to use a de-googled phone.
Thx, all worked.
Mian-786 said:
I haven't tried MicroG in any of the ROM. I just to have as little Google apps as possible but if you do find a good guide, let me know, I will try to use a de-googled phone.
Click to expand...
Click to collapse
I've installed MicroG. But it seems AOSP doen't allaw support system spoofs signature. Play services (GmsCore) is installed but without the spoofed signature it can't do much I guess...
I have been using AOSP Android 12 for the past week or so. Most of the things just plain works but somethings don't. Here is the list of things that are not working so you can decide if the hassle of installing GSI is worth it or not.
- Proximity Sensor is worse than it was in OneUI. Yes, it is a virtual sensor but on OneUI, it worked better. Now, it is worse. More often than not, it turns on the screen during the call. It would have been better if it simply didn't work.
- The viewport of default camera App in the AOSP displays picture in 4:3 but the camera hardware is giving out 16:9, so the viewport was squeezed. After installing GCam everything is good.
- Fingerprint Sensor simply doesn't work in-app like those in banking apps. It works on the lock screen but nowhere else.
- USB Audio Devices don't work. I have a USB-C to A OTG where I used to insert my headphones. On OneUI they used to work but here they don't. Storage devices work.
- 120 Hz felt smoother on OneUI.
Hello everyone
I managed to install LineageOS with working GApps and camera using this guide, so a big thanks to everyone who worked on flashing this phone
If anyone wants to install it, you need to:
Chose a bgN package (I installed this one : https://sourceforge.net/projects/an...UNOFFICIAL-arm64_bgN-vndklite.img.xz/download). It includes the GApps. You won't be able to install GApps after installing a vanilla (bvS / bvN) package. For some reasons, the /system partition is too small.
For unlocking camera and install magisk, just flash this kernel : https://forum.xda-developers.com/t/kernel-12-13-a528b-n-mesas-custom-kernel-r4.4490653/
I also installed magiskhide prop conf module, but I'm not sure it changed anything and the camera fix was probably already in the MCK. You can find it here anyway : https://forum.xda-developers.com/t/...safetynet-prop-edits-and-more-v6-1-2.3789228/