Related
I am considering switching from the LG G2 to a N5, and I wanted to get some opinions on the matter. I have scoured the internet(including xda) for hours, and I keep getting wildly varying reports from different sources. My concern is that the N5 is very easily scratched.
https://productforums.google.com/forum/#!topic/nexus/WBQyoSwdQTw
I used a screen protector on the Photon before saying "screw it" and going naked, and I've used the G2 naked for 5 months. Both screens are still in pristine condition, despite being older revisions of Gorilla Glass(GG1 and GG2, respectively).
My concern is that the N5 is for some reason abnormally easy to scratch. I baby my phones a bit, but not excessively(I put it in a separate pocket with the glass to my thigh, I try not to beat the thing with my finger, nothing crazy...). I figure with the fact that I work in some pretty dusty climates, if dust/sand were an issue, my G2 would be far from pristine. I enjoy the naked feeling, but I'm not sure I feel right purchasing a $40 Tempered Glass protector(that I may need to replace a few times over a year, plus it appears to be a struggle to apply with the fact that the display has a dimple in it). Even though I won't use plastic again, it was nice when it got scratched because it was a few bucks to replace, not 10-15% the cost of the whole phone.
So basically my question is to the people rolling naked(well that sounds wrong...), what are your experiences? I really don't agree with protectors, but my OCD doesn't agree with tiny scratches. Thanks!
I roll naked.
I also don't use a screen protector
I've had my N5 since launch day. I would say I "baby" my phone in that I don't do anything with it that is particularly hard on it. If I shine a flashlight on it or have it outside on a sunny day I can see a few "microscratches" that reflect light but are completely smooth to the touch. Apart from that I don't notice anything, even under bright fluorescent lights in my office.
I don't know why this gets brought up so much. If you're worried so much about scratches then get a protector. If you don't like plastic then get glass... You'll wish you did after replacing several plastic ones. The issues you bring up regarding the glass ones and the dimple on the screen has been long fixed and is no longer an issue. Just spend $35 for a Spigen or ~$20 for a Nillkin glass screen protector and be done with it. Its hardly a waste of money and the protectors are more durable than the actual screen.
You dont really need a screen protector but I have an Invisible Shield on mine and its great, I have one really dense scratch on it that you can only see when the screen is on and you look carefully, that will go away when I peel it off. If you are buying a screen protector make sure it goes with the case you get, some cases might peel off the edges of your protector and ruin it.
Dont really think a screen protector is necessary. I have not used one on my old Note 2 or my htc evo before that. N5 has GG3 which does make it a more scratch resistant. Not running a screen protector
I like the HD clear screen protectors by Halo. They have the best edge to edge protection compared to several others that I have tried on my N5. Amazon link - http://goo.gl/hU0NPg
iloome flex. All I have to say.
People say you dont need it, until you **** up your screen, looking at my screen right now, its got some fat scratches, except it doesn't, cause the scratches are on the screen protector.
If there's any chance you could get sand or dust in your pocket at any time GET A SCREEN PROTECTOR!
It only took a really small amount of dirt/sand getting in my pocket during a camping trip to hammer my first N5 with scratches.
Tempered glass is great option, u will avoid both scratches and have better protection for the screen in case u drop it, which I do, not often but occasionally
I use MediaDevil Magicscreen Screen Protector on my Nexus 5 http://www.amazon.co.uk/gp/product/B00GCG3MY2/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
I bought the Spigen Case Slim for the N5 and it came with a free screen protector!!! It works like a charm, for the price of the two, £7 it was a bargain!!! The screen protector is very good also...
It's very clear and your finger doesn't get stuck by no means...
While GG3 is more scratch resistant to keys/knives, I believe it's not more resistant to dust which is the biggest issue when it comes to scratches. My first N5 I didn't have a screen protector on it because I ended up RMA'ing it. It already had some micro-scratches. Again, you can't feel them and barely see them unless you look for them but they're still there so it depends on how much you care about that. I also keep my phone by itself in my pocket with the screen to my leg and they still happen because of the dust. I've been using a screen protector ever since I received the 2nd phone.
As we all know, nowdays glass screen protector is probably best way to go.
OP will sell their official protector as they did for OP5 (already on the site). In this case you would expect top quality accesories and we all know how it went with 5.
For me it was no go with protector for ~20 euro that cuts off ~1mm on each screen side.
Here is my question, how it will go this time? how do you think? Maybe someone can provide some insight from their own sources?
As for now, from what i managed to find: it will cut less screen or even nothing (hope).
Later on, please also post your alternatives from 3rd party.
I actually think they might have an easier time with them, they can just produce a protector that covers the whole front of the phone now (No home button/FP Reader) which should reduce any stress fracture areas and make it easier to produce. Due to the change it might be some time before we see an official one.
Judging by the collection of crappy protectors produced for the OP5, hopefully the 5T won't have protectors that only adhere round the edges.
Honestly, I've been quite disappointed by the OP own's glass screen protectors.
After trying a few of the aftermarket ones (Ozry and co.), with varying mileage, I finally went nake.
Still curious to see how that's going to work on 5T.
W!
I dont need the curve screen. Give me the flat one Oneplus! Tempere glass on OP5 is a nightmare.
keaheng said:
I dont need the curve screen. Give me the flat one Oneplus! Tempere glass on OP5 is a nightmare.
Click to expand...
Click to collapse
Same here. I still have to find a TGSP that doesn't have the rainbow effect and that covert the whole front of my OP5.
Have tried multiple ones from eBay and all of them have the stubborn rainbow in the center of the screen.
I officially hate those curved displays.
When I remember my first OPO, and than my OP2... ah, nostalgia.
I honestly love my oneplus branded tempered glass on my OP3 and OP5. The "it blocks pixels" thing is WAY overblown. Yes, you'll lose 1-2 rows of pixels, but it doesn't affect useability at all. They cover the whole screen, use adhesive on the entire protector, no halo effect, and if you use a oneplus branded case, the seam between the protector and case is so tight you can't even tell the phone is in a case.
10/10 would recommend to anyone without hesitation. I've tried a lot of the aftermarket stuff and it's all trash.
I have ordered the op5t glass however I'm sticking to the plastic protection that comes with device
https://forum.xda-developers.com/oneplus-5t/accessories/oneplus-5t-official-tempered-glass-t3709332
Our friend here got it before me. Good to know tho, look 4:03. Mine is at home aleady, after weekend I will write mine opinion.
Anyone have experience with these people and what they offer :
https://www.moutfitters.com/
This morning, I applied my OnePlus branded tempered glass screen protector. I really like it, although there is one spot next to the volume rocker that will not stick down, causing a small halo effect in that spot. I can only see it when the screen is off, so I'm not going to worry about it. This screen protector feels very nice, especially compared to the plastic one that comes on the phone. I recommend that anyone looking for a quality screen protector, buy the one from OnePlus.
I bought the op glass screen protector and the sandstone case when I ordered the 5t. I will keep the factory applied screen protector as long as possible, but its nice to have a back-up. I do think it is cool that the supplied case acts as a guide for installing the op glass preotector.
I too bought the sandstone case/tempered glass protector combo and must say the fit and finish is superb. The screen protector went on perfect thanks to the supplied case acting as a guide and it is 100% bubble free. With the screen protector in place the sandstone case mates perfectly and you can tell they were designed to be used in conjunction with each other. The case looks good and gives the phone a nice grip but I highly doubt it offers any thing besides scratch protection. I will be switching to a more protective case as soon as a good one is available.
From my Google Pixel and Oneplus 3 experience, the official case and screen protector was the best. It's a little bit high on price but it will protect your device longer lasting and like the charm. So, this time for my upcoming OnePlus 5T, I'm going to buy 3D tempered glass screen protector.
Hello,
Already anybody with a good fitting glass screenprotector?
I have tried 2, but they don't fit good at the edges.
Mark
internetuser2004 said:
Hello,
Already anybody with a good fitting glass screenprotector?
I have tried 2, but they don't fit good at the edges.
Mark
Click to expand...
Click to collapse
I've seen many people with the same problem as yours, that is why I haven't got a screen protector.
I have some under watch in eBay, but I'm waiting on feedback before purchasing
I bought those "liquid/nano Screenprotectors" coz they fit every screen.
I dont know if they are good but my screen is still like new.
Ultimate Shield are now doing glass protectors for a range of Honor and Huawei devices, including the P20 Lite. They are priced to be a bit more premium, but I have used them in the past and been quite happy with them. This was before the trend of curving the edges of phone screens though. These are full sized protectors with a coloured border, but the glue is full coverage rather than just at the edges. I have just fitted one to my son's new P20 Lite. As it has just been fitted I am unable to comment on durability yet. However the fit seems pretty good. As mentioned, it covers the front of the device fully from edge to edge both horizontally and vertically. The hole for the speaker and camera lines up perfectly, but it does look like the black borders encroach a little onto the actual display area at the sides. I don't think this would be enough to impede usage of the phone on a daily basis. It is just noticeable as it disrupts the flow of the rounded corners. The edges are nicely rounded and are not a harsh edge, unlike the cheap protector that I currently have on my Honor View 10 (I have bought an Ultimate Shield for this too, just haven't fitted it yet). I did manage to get one tiny bit of dust under the protector which has caused a small bubble, but this is under the display in the chin area so no real issue and not a fault with the screen protector. There was another bubble at the top left of the display, but keeping pressure on this meant it eventually disappeared. At the edge in the same area I noticed a small sized air pocked just creeping out along the black border, almost as if it was a tiny area with the infamous halo. This isn't noticeable with the screen on and I hope it will go over time. Overall I am quite happy with how it fits and looks. The only real negative is that the supposed oleophobic coating doesn't seem to be doing a great job. But, tbh, I don't think I have ever found a screen protector where it has worked as I expected. Are my expectations just not realistic? Or do we have particularly oily finger tips? Nothing a frequent wipe on a t-shirt won't sort out though.
Would certainly recommend if you are fed up of these screen protectors that are much too small and give you a halo round the edges.
https://www.ultimateshield.co.uk/collections/huawei-p20-lite/products/huawei-p20-lite-tempered-glass-screen-protector
They also do full body coverage wet apply protectors (invisible shield style) if you like that kind of thing.
I got one when i bought the phone and it did not fit good at the edges, but i found a youtube clip called "Removing Halo Effect from Tempered Glass (Olive Oil)" and it worked for me. its been 3 months since then and all is good.
Hello all,
I'm looking for the best tempered glass screen protector for Pixel 2. I have looked through the List of Google Pixel 2 Screen Protectors and I have searched Amazon too, but the reviews are either fake-5-star-reviews, or generally poor reviews.
Can anyone recommend the best option for a Pixel 2 tempered glass screen protector?
Thank you
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Spigen, take your time as it fits perfectly side to side on the visual part of the screen only.
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
munchy_cool said:
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Click to expand...
Click to collapse
is it full adhesive and curved on the edge?
koax88 said:
is it full adhesive and curved on the edge?
Click to expand...
Click to collapse
nopes
If you are looking for the best, whitestone dome is probably the way to go. It is expensive though. If you aren't worried about full adhesive and curved so it passes the edge of the display there are a lot more options. Spiegen is good for a lower cost option, but it only goes to the edge of the display and doesn't curve.
Thank you for all the suggestions. I'll definitely use one of these screen protectors
ElaineM said:
Thank you for all the suggestions. I'll definitely use one of these screen protectors
Click to expand...
Click to collapse
avoid those on ebay for under $3 or aliexpress. you'll just waste your time
Keithn said:
whitestone dome .
Click to expand...
Click to collapse
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
boondiordna said:
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
Click to expand...
Click to collapse
I'm currently using one. I think it would fit the Google case, but I haven't tried. I've used it with an OtterBox symmetry, a speigen tpu, and with the moment case with no issues. It covers the full display but still leaves gaps on the edges.
I haven't noticed any significant blue light filtering but I did see that the description stated that. I can try to compare it against another Pixel 2 with a different screen protector and see.
Thanks, that would be nice of you if you could have a look at a second Pixel 2.
FTR, I turned off colour boosting, and really appreciate the near-natural colour provided by Google's OLED settings. I couldn't understand why people complained about the "faded" colours in the beginning. I bought this thing as a camera with a phone, and I want to see my photos as close to what I see while shooting them. Filtering blue light is a bit of a deal-breaker for the glass dome, if perceivable.
I've had 2 Whitestone Dome Glass protectors. The first had to be replaced when my phone slipped through the gap in my pull out couch and when trying to get out it slipped under one of the couch legs, crushing the screen (no screen protector will help in that case). The second came in today, after some back and forth with Whitedome trying to figure out why it was showing out of stock on Amazon, and I had to trash it less than an hour after opening it.
The first one was a hassle to install but once installed I really, really liked it. The second had a broken bottom piece for installation, causing an imbalance in the phone and I went through 3 (one left over from first install) adhesion tubes before I realized that was why a good bit was slipping over the edge of the phone and not across the display. When I realized what was going on I was kind of angry it even happened, wasn't paying much attention, and the protector cracked when I was removing it to try and clean up everything...
I either got lucky with the first or REALLY unlucky with the second, but either way I'm not buying another one. The installation process isn't exceedingly difficult, but it's just way too cumbersome for what it should be, costs too much, and just isn't worth the headache. Really disappointed in it. Luckily Amazon did me a solid and is letting me refund it.
That first was by far the best I found for TGSP's for the Pixel 2. I'm really hoping the Pixel 3 goes back to fully flat glass, not this "it's curved just enough at the edges to make it extra difficult for third parties to make screen protectors" crap.
Follow-up: I tried it and it works with the fabric case, there is stilla gap. @jppowers is right about the installation process, it is a buggerance. I had an air bubble, glue spilled under the protective sticker on the speaker and it was generally cumbersome.
There is some blue light filtering, which makes sense given that the glue is near-UV-polymerised, but my brain compensates this and I don't see it if not in direct comparison with a screen without the protector.
100kaa said:
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
Click to expand...
Click to collapse
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
bbdcbb said:
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
Click to expand...
Click to collapse
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
100kaa said:
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
Click to expand...
Click to collapse
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
bbdcbb said:
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
Click to expand...
Click to collapse
Hey, I don't really know what could be the problem. At the beginning everything was OK, but later problem with dust appeared. I am in normal surroundings, with no extra dust. Office-house.
I bought, as reserve, from same guy foil protection also. Maybe it will be better.
When a screen protector only has glue on the edges the dust enters at the speaker openings. I'm still using my original Spigen Glass protector with zero dust since it adheres to the whole screen but doesn't cover the curved sides, the pack comes with 2 protectors and I will swap it out soon as the fingerprint resistance isn't the best anymore(but it's been almost a year).
Whitestone's Dome is definitely the best by far, but just as everyone else has mentioned, the installation process is a massive hemorrhoid. For what they charge they oughta include a professional in-home installation service.
I highly suggest to anyone who gets the Dome, set aside 2 hours, watch the videos online, prep your area, and be extremely patient. Also, make sure you've eaten and haven't had anything that will make you jittery or anxious like coffee, it will make the whole process much easier to handle and you'll be much less likely to fly into a rage if you run into issues.
Also, as mentioned by others, be sure to fully inspect your glass before you attempt to install it. There is a very thin film on the back of the glass to keep it from splintering in the event of a shatter, and sometimes they end up with bubbles between the glass and film during manufacturing. I went through both tubes of adhesive and a lot of frustration before I realized the bubble was not a personal application error but a flaw in the glass. Getting a replacement was no issue, but I still lost two hours and grumbled quite a few choice words.
Caveats aside, it's a superb full coverage TGSP.
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.