Develop Bugs

[DISCONTINUED][KERNEL][5.1][CM] Phoenix Kernel v1.6 [18-February-2016][OC CPU + GPU]

DISCONTINUED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, here I'm introducing a custom kernel for our Moto X Play, based on Squid Kernel . Full credits goes to him:fingers-crossed:. I only added some tweaks and more is coming soon. No more blah blah...
Features:
Reduced VFS cache pressure
Disabled noatime and nodiratime
Dirty ratio tweaks
Enabled Arch power and Disabled GFS
Asynchronous I/O latency to a solid-state disk greatly increased
Optimized SLUB
VM_MAX_READAHEAD set to 1024 kbytes
Optimize apply_slack for size and speed - thanks to varunchitre15
Forward port Dynamic Fsync to Linux 3.10 by varunchitre15
Disabled MMC CRC check
Enabled some extra TCP Congestion Controls
Use all cores on-boot for faster bootup
HMP-aware task placement
Code:
[B]CPU Hotplugs:[/B]
[SIZE=2][STRIKE]Bricked Hotplug[/STRIKE]
MSM Hotplug
[STRIKE]MAKO Hotplug
ZEN_DECISION Hotplug
AUTOSMP Hotplug
MSM SLEEPER[/STRIKE][/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=2]LIONFISH
SMARTMAX
BLUACTIVE
SMARTASS2
INTELLIACTIVE
INTERACTIVE_PRO
ZZMOOVE
ALUCARD
BARRY_ALLEN
BIOSHOCK[/SIZE]
How to install:
Download Phoenix kernel flashable zip
Copy it into SD Card
Reboot into custom recovery
Install zip from SD Card
Credits:
squid2 (for the GPL source)
varun.chitre15 (for the GPL source)
Kunal.Kene.1797 (for the GPL source)
HridayHS (for the GPL source)
Shoaib05 (for the GPL source)
Motorola
XDA
Google
Missed you ? sorry pm me I'll add you
Downloads:
See the attachment or Download
*** v1.5 and above are not compatible with Stock 5.1 roms ***​
Click to expand...
Click to collapse
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar, squid
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-24
Created 2015-10-24
Last Updated 2016-02-18

Change log
v1.0 2015 October 24
Initial release
v1.1 2015 November 03
Up to date with Squid Kernel
Added frandom
Network speedup tweak
kernel/sched/fair: reduce latency
power: process: drecrease time to enter sleep
defconfig Enable NTFS,CIFS
Added intelliactive - Paul Reioux
Added smartass2 - Erasmux
Added bluactive - Mike Chan,engstk
Added interactive_pro - Mike Chan
Added smartmax-maxwen
v1.2 2015 November 14
Up to date with Squid Kernel
Added Bricked Hotplug - showp1984
Added MSM Hotplug - myfluxi
Disabled IOSCHED_TEST
v1.3 2015 November 26
Updated Lionfish
Wake mod s2s added
Disabled Bricked Hotplug and added MSM Hotplug as default
v1.4 2015 December 26
Up to date with Squid Kernel
Reduced swappiness to 30
Reduced lag
Some minor fixes too
v1.5 2016 February 08
Up to date with Squid Kernel
Linux 3.10.96
Reduced lag
Improved smoothness
Updated Powersuspend
Adreno idler by arter97
320K AAC Encoding
SELinux: permissive
Compiled with Phoenix GCC 5.2
v1.6 2016 February 18
Up to date with Squid Kernel
Overclocked CPU + GPU
Added zzmoove - Zane Zaminsky
alucard - [email protected]
barry_allen - Javier Sayago
bioshock - James Jamison
Added support for CRC Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Task-Search for upto 6% increase in Performance
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Enabled High-Priority WorkQueue for DevFreq
Fixed High-Load Average due to Drivers
Fixed Reporting of GPU Frequency
MSM_HOTPLUG: min 2 cpu while screen off
msm8939: overclock lux big cluster to 1709 MHz
msm8939: overclock lux little cluster to 1209 MHz
msm8939: overclock GPU to 700MHz

Aren't hotplugs like MSM hotplug, bricked hotplug etc. meant for qcom quad core/krait CPUs? I'm not sure how they'd behave on big.LITTLE. Even the governors, I'm not sure they are adapted to big.LITTLE.... could you shed some light on it? Also, your commit history looks like a kang job.... you should clear that out.

Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.

It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...

AnoopKumar said:
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
Click to expand...
Click to collapse
Tbh cherry-picking commits doesn't need a fast internet connection. (I myself have picked commits on a 512 kbps internet) and credits need to be given in the commit, otherwise it counts as a "kang".
Also, credits for bricked hotplug and alucard hotplug etc. haven't been given even in the thread.

Pardon me.. I will fix it give me some time

AnoopKumar said:
Pardon me.. I will fix it give me some time
Click to expand...
Click to collapse
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.

Nice work AnoopKumar. Added to index

eskamhl said:
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
Click to expand...
Click to collapse
Thank you for the feedback.. Some issues are removed and added new zip

Quasar said:
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Click to expand...
Click to collapse
Bro removed all kanged commits.

Perfect, working 100%!!
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.

No more additional cpu governor on the last version?

Nico3d3 said:
No more additional cpu governor on the last version?
Click to expand...
Click to collapse
Actually I removed them because of some authorization issues...

Abravanelsenor said:
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
Click to expand...
Click to collapse
Stay tuned its coming in the next version.

AnoopKumar said:
Stay tuned its coming in the next version.
Click to expand...
Click to collapse
Possible to incorporate D2W?
Thanks :good:

possible installation in the RR 5.5.8 ? No Bootloop ?

FilipeRgz said:
possible installation in the RR 5.5.8 ? No Bootloop ?
Click to expand...
Click to collapse
Currently i'm on pac rom, not faced any bootloop.

brom25 said:
Possible to incorporate D2W?
Thanks :good:
Click to expand...
Click to collapse
Im working on that too. Only sweep2sleep working now

AnoopKumar said:
Currently i'm on pac rom, not faced any bootloop.
Click to expand...
Click to collapse
I'll back up and install for testing, thanks

[6.0+]Mimori Kernel [AOSP & Lineage OS Based ROM]

Mimori Kernel | Stability for performance
For Xperia M
Based on Lineage OS 14.1 source​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Mimori Kernel based on Lineage OS 14.1 source, and included many improvement and optimization on processor, I/O and include some feature for Xperia M / M dual devices that use Marshmallow as base ROM.
Mimori offered kernel performance, stability, smoothness process on cpu and already have full support on NEON, this kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration :
- Kernel Adiutor (BETA)
- Device Control
Okay this is several features that i include in this kernel.
This kernel feature is :
Kernel Features
* Linux Kernel Version 3.4.113
* Compatibility with AOSP,CM And LineageOS based ROM [Android 6.0+]
* Added overclock up to 1,4Ghz
* Added Double Tap 2 Wake Feature (Incl. Vibration)
* Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,Lionheart,Adaptive & Blu Active (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,vr and maple (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah and more
* Added CPU Voltage Table Control
* Implement Power Efficient Workqueues
* Dynamic management of dirty page writebacks
* Added Interface of Gentle Fair Sleepers, Software CRC and Arch Power (Option Disable by Default)
* Added Frandom Support
* Added Dynamic Fsync 2.0
* Entropy Tweaks
* NEON VFPv4 Optimized (hard)
* Added Intelli Plug v4.0
* Added Intelli Thermal v1.0
* Added F2FS File System Support (Based on Linux 3.4.y Branch) (Working)
* Added EXFAT File System Support (Driver Version v1.2.9) (Need Test)
* Added USB Keyboard Support
* Optimized I/O Sched
* Compiled using GCC 5.4.X Hyper Toolchains
* Updated CVE Patch From LineageOS Kernel Source 20171106
[/LIST]
[/LIST]
How to install :
1. Download Mimori Kernel and install it from recovery mode, use TWRP recovery (TWRP Link)
2. install kernel adiutor from Playstore for kernel configuration (i don't have myself app to control kernel) (Try to use BETA version to get fix for CPU temperature)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to : 
 @PecanCM [For Kernel Source] 
 @Alex_Gamer [For Kernel Tester & Troubleshoot] 
 @thichthat [For DT2W Source]
XDA:DevDB Information
Mimori Kernel For Xperia M, Kernel for the Sony Xperia M
Contributors
Nicklas Van Dam, PecanCM, Alex_Gamer
Source Code: https://github.com/Nicklas373/Mimori-Kernel_MSM8227_LineageOS_14.1
Kernel Special Features: Overclocked, ARMV7 NEON Optimized
Version Information
Status: Stable
Current Stable Version: Seventh Build
Stable Release Date: 2018-02-11
Created 2016-09-03
Last Updated 2018-02-19

Kernel Adiutor OTA Update Information
Now for CyanogenMod And AOSP Based ROM, Hana Kernel Offered OTA Update feature for kernel update using kernel adiutor app for CyanogenMod Based ROM with "download" feature in kernel adiutor.
You can download new build in that menu included ; introduce, kernel feature and changelog update. Now i'm still try to enable it on LineageOS too, i'm just need to wait confirmation from the admin .
For anyone want to install this kernel, can access too using KA. just like normal download and installation for kernel :laugh:
Have fun

Kernel Adiutor Information
For Kernel Adiutor Usage
During new stable version of Kernel Adiutor have problem with CPU temperature, now we should use BETA build from Kernel Adiutor to get fix for that problem.
And for set on boot configuration, i'm not recommended it again , since that only can make kernel error during boot up process.
So set kernel when system is already boot is best option for stability and performance.
If kernel adiutor to hard for configure, then you can try Device Control app to manage your kernel.
This app is almost same like KA but it's little simple and more friendly for configuration

Changelog :
Seventh Build (20180211):
- Fixed some upstream issue
- Upstream to 3.4.113 (REBASE change)
- Fix issue with OTG problem (Recovery or System)
- Updated F2FS to latest 3.4.y and misc fixes
Sixth Build (20180122):
- Updated Kernel Security Patch to 20171106 (Based on MSM8960T Source)
- Change GCC to GCC 5.4.X Hyper Toolchains
- Misc fixes with intelli thermal
- Applied last patch with 3.4.113
- Applied security patch with "KRACKS attacks"
- Removed sdcardfs drivers (not used by device)
- Misc CPU Optimization
- Set readahed to 512kb
- Added GPU optimizations flags
- Improve Hard Floating Point for neon-vfpv4
Fifth Build (20171002):
- Introduce IMAGINE Codename
- Upstream Linux Kernel to 3.4.113 based on git.kernel.org
- Revert change of F2FS (back to old source)
- Revert some optimization change
- Added Maple I/O Sched (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- I/O Sched Optimization for SIO and ZEN
- Enable Interface Of Software CRC
- Misc CPU Optimization
- Added some sched optimization
- Disabled USB Fastcharge v1
- Reverting Permissive, Back to Enforcing
- Added Blu Active CPU Governor (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- Added Support for Neon VFPv4 With Hard Floating
- Disabled Quick Wake Up Drivers
Fourth Build (20170913):
- Added Optimization on I/O Sched (Improves SSD Speed)
- Misc fixes for conservative governor
- Added F2FS and EXFAT File System Support
- Added Hyper CPU Governor
- Optimized KSM
- Update Intelli Plug to v4.0
- Optimized SLUB
- Set readahed to 256KB
- Added CCACHE for faster kernel building
- Updated CVE Patch (Kernel Security Patch) to 20170826 Based On MSM8960T
- Misc Optimization
- Added Quick Wakeup driver
- BACKPORT F2FS from branch Linux 3.4.y (git.kernel.org)
- Reverting Quick Wakeup Driver
- Added USB Keyboard features
- Updated SDCARDFS Driver
- Misc fixes
Third Build (20170821):
- Little Improvement on CPU Bus Speed
- Added Dynamic Fsync 2.0
- Added Frandom Support
- Added Interface of Gentle Fair Sleepers (Option Disable by Default)
- Misc change on I/O Partitions
- Dynamic management of dirty page writebacks
- Removed "+" Symbol From Kernel Version String
- Implement Power Efficient Workqueues Feature (Enable by Default)
- Revert Alucard CPU Governor to v1.0
- Added Interface of Arch Power Features (Disable by Default)
- Entropy Tweaks
- Build vfp with softfp
- Misc change with cpufreq
- Added Intelli Plug and Intelli Thermal
- Fix Neon VFP
- Upgraded Kernel to 3.4.4
- Change toolchains to Hyper Toolchains GCC 4.9
- Decrease thermal limits to 70c
Second Build (20170817):
- Set kernel as permissive
- Enabling 972Mhz to fix slow response on boot and skipped frequency on system
- Added Custom TCP Congestion
- Added CPU Voltage Control
- Added DT2W Vibration Support
- Added USB Fastcharge v1
- Adapted Some CPU Governor with CPU Freq Table
First Build (20170816):
- INITIAL BUILD
: - Included Custom CPU Governor
- CPU Overclocked to 1.458Mhz
- Using NEON Optimized as VFP
- DT2W Feature
- CPU Optimization Algorithm
- Custom I/O Sched

Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 972Mhz (For Normal Usage) . 1.2Ghz (For Multitasking Usage) & 1.4Ghz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive, Blu Active (For Hard/Gaming Usage)
(Beside that leave it as stock)
Hotplug Manager :
Mpdecision = Disable
Intelli Plug = Enable
Profile = Eco for Performance
(Beside that leave it as stock)
Thermal Manager:
Thermald : Disable
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 400Mhz
GPU Governor : Ondemand or Performance (For Hard Gaming)
I/O Scheduler =
(Leave it as stock)
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
TCP Congestions = Depends on your need
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:

[INFO] Double Tap 2 Wake & BETA Build
For Double Tap 2 Wake
Try to use kernel adiutor and check in wake tap, after that choose DT2W and enable it using "full'" option and then let's try DT2W features with vibration on mimori kernel
NOTE : BETA Build For Testing (Not Stable)
github/build
For BETA, try to look date for kernel. Find latest one, and anyone can test latest beta if don't want wait for stable update. I can't promise to make fast update for stable source, i don't want to make any problem. so it's better stay at beta and whenever it ready, and it should release on thread :victory:

Thanks.

Garv Maggu said:
Thanks.
Click to expand...
Click to collapse
you're welcome, i'm still working for optimization in armv7 vfpv4 module.
have fun

Updated
New kernel build v1.1 is released with several fix for vfpv4 and neon modules, download link in on download tab.
have try

Great!

Please add dt2w

Niiiice! I was waiting for new release, I'll test it now

Alex_Gamer said:
Niiiice! I was waiting for new release, I'll test it now
Click to expand...
Click to collapse
my laptop is back from service center , and now is time to back :laugh:

romspeed said:
Please add dt2w
Click to expand...
Click to collapse
i will try on next update, it's to hard to add that anyway .

Nicklas Van Dam said:
my laptop is back from service center , and now is time to back :laugh:
Click to expand...
Click to collapse
Good to hear that your laptop its back to rock

Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk

Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
sound is bursting? i think i'm not to modified to sound on this kernel, maybe that's from high cpu usage so that's make sound is distortion. i will try to look at sound option.
[EDIT]

Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
i'm update kernel with clean build and kernel optimilization, i hope that can fix your problem. i'm already compare sound with stock and my kernel. i'm not hear any particular change on sound volume, maybe very little difference, please to wipe dalvik-cache and cache after install this update

Updated
New kernel build v1.2 is released with several clean build for kernel and optimization on kernel compiler to reduce size, download link in on download tab.
have try

Updated
New kernel build v1.3 is released with first stable build , added auto hotplug drivers and more optimization for armv7 and krait processor
download link in on download tab.
have try

[KERNEL][Lineage-EXTENDED][3.10.105]QUARK[linaro-6.3.1][XT16xx]

QUARK KERNEL For Moto G4 Plus ​(Lineage Extended) ​
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Click to expand...
Click to collapse
INTRODUCTION:
Hello everyone, this is my personal kernel for the Moto G4 Plus. This version is based on Lineage OS kernel source with some additional patches.
FEATURES:​
Compiled using linaro 6.3.1
Init.d support
Disabled Gentle fair sleepers
USB Turbo Charge Support
Added FIOPS I/O Schedule
Added SIO I/O Scheduler
Added BFQ scheduler
Governors enabled:
Lionfish
Dancedance
Lionheart
Smartass2
Bioshock
Nightmare
Alucard
Conservativex
CPU Hotplug Enabled
Added bunches of TCP Congestion Algorithm
CPU Boost
zRAM Support
Fingerprint Sensor As Home
LED Notification While Charging (Thankz to @vache)
ZRAM Compression
Adreno idler
Dynamic fsync
Downloads​Get it here
Instructions​
Flash through TWRP
Credits/Thanks:
- Mororola for sources
- linus for his amazing kernel source
- @vache and @Shreps for base kernel source
Compatibility
- Will work on any roms using LineageOS kernel source as base. (LineageOS,Beanstalk,AOSPExtended,OctOS)
- You can try on other roms and report me back . (if enforcing didn't work try permissive. Be patient while the kernel boots.)
- If you find sensors doesn't work .use this
- If your root breaks.. flash su
XDA:DevDB Information
Quark Kernel, Kernel for the Moto G4 Plus
Contributors
rahulsnair
Source Code: https://github.com/rahulsnair/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-03-18

Changelog
1.0
-Initial Release
1.1
-Added Zen I/O Scheduler
2.0
-Switched to Sabermod toolchain
-Now supports Android N based roms
05012017
-Switched back to UBERTC-6.0
-Synced to CM kernel source
25012017
-Using linaro from now on
-ZRAM compression
-Adreno idler
-LZ4 ZRAM compression
-Dynamic fsync

@rahulsnair Nice work Buddy

You are on fire my friend

do u know if this will work on your teamoct os?

Dont know how, dont know why but i installed and i dont know why but everything works good

It works great in CM 13.0 XT1641

A can confirm that it works on octos xt1622 smooth as and great kernel thanks dev for the rom and kernel keep up the good work??

Working great so far on RR xt1625. You're killing it.

Is this kernel for custom ROMs only, or will it work with stock too?

Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?

skalnas said:
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
Click to expand...
Click to collapse
Wich ROM are you using? I also have xt1625 want to test
:good:

Teamoct os

rahulsnair said:
Changelog
1.1
-Initial Release
1.1
-Added Zen I/O Scheduler
Click to expand...
Click to collapse
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.

Krsambhav16 said:
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Click to expand...
Click to collapse
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.

doomed151 said:
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
Click to expand...
Click to collapse
Okay Bro Thanx, I Thought That My Cores Have Been Damaged.

Bootloop in (xt1626) rom Temasek's CM13 - v11

Did the download link disappear or am I just dumb and can't see it

khaoticking said:
Did the download link disappear or am I just dumb and can't see it
Click to expand...
Click to collapse
Is there, see again

Hello, just report. This Kernel work very well on my XT1642 with the last RR ROM. Good luck.

[KERNEL] [LineageOS] [EAS] Energy Aware Scheduling [Mar 07]

Code:
****Disclaimer: I'm not responsible if you destroy your device. Use at your own risk.
Introduction:
This kernel is to be used to enable Energy Aware Scheduling (EAS) on a LineageOS based device. No features will be added, unless they are directly related to the bare-bones functioning of EAS. You must leave the scheduler as either sched or schedutil to maintain EAS functionality. Feature requests will be ignored and reported.
Note to developers: Please feel free to use my 14.1-master-eas branch to base your LOS kernels off.
Bug Reporting:
Please only report bugs and do so in the following format:
Device Firmware base:
Kernel Version:
Device ROM, version and date of release/nightly:
Governor:
Scheduler:
Any changes made within a kernel manager:
Any bootup scripts:
Brief description of bug:
Intended behavior:
Actual behavior:
Steps to reproduce bug:
Do this
Do that
See the bug
****Attach a logcat or you will be ignored****
Features:
Same as LOS + EAS
Requires:
CM/LOS 14.1 based ROM
Changelog:
Code:
3.07.17
-------------------------
*Upstream LOS changes (rebased)
2.27.17
-------------------------
*No longer doing standard versioning. Just going to be a date.
*Re-based with most recent LOS/upstream changes
*Fixed bug with schedutil causing a bunch of cgroup warnings in logs (Thanks Renderbroken and Eliminater74)
2.22.17- v0.1
-------------------------
*Initial release
Install:
Back up.
Flash in TWRP.
Download:
Download Section
Additional Credits:
Thanks to @Eliminater74 for taking a lot of his time to help me make this a reality and for first porting EAS to the HTC 10
Thanks to @crpalmer for all his hard work on the HTC 10 LOS kernel
Thanks to @cufuffles for suggestions on the ramdisk
Thanks to my testers: @rav101, @Meowdib (If I forgot you let me know)
Original Sources:
LineageOS Kernel
Original EAS Kernel Source
AnyKernel2 by @osm0sis
XDA:DevDB Information
PME MSM8996 LineageOS EAS Kernel, Kernel for the HTC 10
Contributors
tabp0le
Source Code: https://github.com/tabp0le/android_kernel_htc_msm8996/tree/14.1-master-eas
Kernel Special Features: LineageOS kernel with Energy Aware Scheduling (EAS)
Version Information
Status: Snapshot
Stable Release Date: 2017-03-07
Created 2017-02-22
Last Updated 2017-03-07

Reserved

Reserved

Sorry, but for illiterate peons like myself....
Pros and cons of this vs your pure AOSP kernel?
Thanks.

Really great, thank you for your work

mcwups1 said:
Sorry, but for illiterate peons like myself....
Pros and cons of this vs your pure AOSP kernel?
Thanks.
Click to expand...
Click to collapse
My other kernel has modifications and additional features. This kernel only enables EAS. You can find out more about EAS here.

Kernel seems to cause SDcard corrupted message, my external SDCard is formatted in vFat.

Flashed your kernel 4hrs ago and so far so good no problem at all im running latest RR by eliminater. youtube seems fine at 60fps great battery life no heavy drain everything runs smooth thank you keep going man!

What is the difference of sched and schedutil governor?

AntoRei said:
What is the difference of sched and schedutil governor?
Click to expand...
Click to collapse
I believe schedutil is newer and still being worked on. Try both.

I tried, maybe with schedutil a slight increase of performance

AntoRei said:
What is the difference of sched and schedutil governor?
Click to expand...
Click to collapse
Sched is external governor which was made especially for qcom-based devices.
Schedutil is the new governor that available in upstream since 4.7 kernel.
Schedutil works purely on update callbacks that triggered by task scheduler on any CPU utilization changes.
This allows governor to response to the load changes immediately and then scale frequency using scheduler information.
I can't say anything about sched, but personally I recommend to use schedutil.

Updated with latest LOS changes and some bugfixes

[KERNEL][Affinity Kernel][OP5/5T][OOS/Custom][4.4.178][6 Apr]

Introduction:
Affinity Kernel is a custom kernel based on the latest Stable Linux 4.4 release from kernel.org.
This kernel is developed with performance and great battery life in mind offering some goodies cherry-picked from other popular kernels such as Flash Kernel, ElementalX, blu_spark, Boeffla Kernel, Sultan Kernel and Franco Kernel.
The kernel is always up to date with mainline linux kernel and is regulary updated with the latest fixes.
The goal is to provide a butter smooth experience, simmilar to what you get with the latest Pixel devices.
Affinity Kernel is based on the official kernel source released by OnePlus.
Code:
/*
* Your warranty is not void (Thank you OnePlus!).
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Upstreamed to the latest Linux Stable 4.4.x
Upstreamed to the latest CAF tag LA.UM.6.4.r1-11500-8x98.0 & LA.UM.7.4.r1-04800-8x98.0
Tunable with Kernel Adiutor and others
Additional CPU gorvernors
Sound Control
Adreno Idler by @arter97
Full WireGuard implementation
Sweep2Sleep gesture
Fast charging on USB
FS fsync toggle (enabled by default)
Additional IO schedulers (Maple, FIOPS, SIO, ZEN)
Qualcomm MDSS v2 (sRGB + KCAL)
dm(avb)-verity disabled
Faster app cold-launch
IO Tuning
Optimized with oFast and O3
Westwood TCP algorithm as default
Full Treble compatibility with Treble related fixes
Individual Input Boost frequency for each cluster
Disabled the BCL battery driver
Backlight Dimmer by @flar2
Boeffla Wakelock blocker v1.1.0
CDROM emulation
init.d support
ARM target optimizations
Passes SafetyNet check
Crypto Routines optimizations
High Brightness mode
Adreno driver improvements
EAS
Dynamic SchedTune Boost v3
KLAPSE Driver
Decreased swappiness
Installation:
Before you install the kernel, make sure you have
a backup of boot partition in case something goes wrong!
If you are coming from stock kernel:
Reboot into TWRP
Flash the Affinity Kernel.zip
Reboot
If you are coming from another custom kernel:
Reboot into TWRP
Dirty flash your rom or restore boot backup if you have any
Reboot recovery
Flash the Affinity Kernel.zip
Reboot
Updating:
Just flash the latest Affinity Kernel build over the previous one
Downloads:
{Mod edit}
On ROMs like Dirty Unicorns, WLAN won't work because the wlan module is required
to load on device initcall rather than late initcall like other ROMs do. There's a workaround for it but
it breaks WLAN on all ROMs that have the module built inline or the CAF way
{Mod edit}
Thanks to:
@joshuous for his EAS commits and Dynamic Sched Boost
@osm0sis for his AnyKernel2 installer
@nathanchance for his android-linux-stable project and helping me
@Lord Boeffla for Boeffla Wakelock Blocker and LED control
@Sultanxda for his fixes and other stuff
@eng.stk for his tweaks
@flar2 for his Sweep2Sleep gesture driver
@tanish2k09 for KLAPSE Driver
And all those folks contributing to Linux Kernel
XDA:DevDB Information
Affinity Kernel, Kernel for the OnePlus 5
Contributors
LinuxUser0227
Source Code: https://github.com/hejsekvojtech/Affinity-OnePlus5
Kernel Special Features: Fast, Battery friendly, Stable, Up to date
Version Information
Status: Stable
Current Stable Version: r24
Stable Release Date: 2018-09-27
Created 2018-09-27
Last Updated 2019-04-06

Compatible with Magisk? If so dirty flash followed by Magisk fine? ?

New Kernel for OOS, amazing, i try this
thx a lot

Nice that you asked me whether you could use my mod... And not even thank me....

RogerF81 said:
Nice that you asked me whether you could use my mod... And not even thank me....
Click to expand...
Click to collapse
Sorry, I forgot. The thread will be updated

Im_Mattgame said:
Compatible with Magisk? If so dirty flash followed by Magisk fine?
Click to expand...
Click to collapse
Yes, you can flash Magisk after flashing Affinity Kernel

Nice I'm going to test it.

Added to the OnePlus 5 Index Thread here.

Affinity Kernel r2 is up!
This build includes just some small changes, mainly new IO schedulers and governors
Here's the changelog:
Enabled all TCP congestion algorithms (westwood is still default)
Enabled full support for Xbox gamepad
Added new IO schedulers:
SIO
ZEN
FIOPS
Added new governor - blu_active
Set Maple IO scheduler as default
Use the same input_boost values as Pixel 2
You can get it HERE

Dash charge doesn't work on r1.

obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
Works for me on both r1 and r2

obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
everything works great!

Khaos said:
Yes, you can flash Magisk after flashing Affinity Kernel
Click to expand...
Click to collapse
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks

bigjailerman said:
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
Click to expand...
Click to collapse
Nope, you don't have to reflash Magisk after installing Affinity

Thanks for fast reply!!

new kernel! i try it

Affinity Kernel r3 is up!
Here's the changelog:
Upstreamed to Linux Kernel 4.4.159
Added Backlight Dimmer
You can get it HERE

with r3 my phone reboot alone

gege0202 said:
with r3 my phone reboot alone
Click to expand...
Click to collapse
What do you mean ? Does it not boot ? Or does it go in a loop ? Does it give you a blue led black screen ?
Please be more specific

Thanks for your work. I'm using this kernel with Oneplus 5T OB17 and works great.