Related
What could possibly going wrong, before my phone it work fin, it read the sim cards with out problems, now i cant even get signal on my phone! Ive try lt15a and lt15i generics roms and none of them could fix the issue, can any help? Thanks by the way
Marvin0581 said:
What could possibly going wrong, before my phone it work fin, it read the sim cards with out problems, now i cant even get signal on my phone! Ive try lt15a and lt15i generics roms and none of them could fix the issue, can any help? Thanks by the way
Click to expand...
Click to collapse
Have you ever thought it could be the SIM card's problem?
popthosegaskets said:
Have you ever thought it could be the SIM card's problem?
Click to expand...
Click to collapse
My sim card works fine on another phone that i have. Like i said it work perfectly fine befor but i forgot to mantion this happen aftwr i rooted the phone.
Marvin0581 said:
My sim card works fine on another phone that i have. Like i said it work perfectly fine befor but i forgot to mantion this happen aftwr i rooted the phone.
Click to expand...
Click to collapse
Shouldn't happen, rooting the phone should not cause this problem. I havr rooted my phone many times but it's still working fine. Which method of root did you use and for which firmware?
僕のLT18iから送られてきた
1. Reboot into recovery, wipe cache, wipe data. Shut down the phone
2. Change baseband with flashtool
3. Power on the phone
Report if it worked please
It isn't something related to rooting I think,maybe u can try out the following-
1.Check after removing sim for 15 mins and inserting it agn Properly inside.
2.If u have a stock rom backup,restore it and try.Check whether your phone is showing your IMEI number or not.Sometimes modem/radio files get wiped out.
3.Could be a hardware issue.Maybe your SIM tray is damaged - either one or more of the contact 'ribbons' is damaged.Check whether or not u can save numbers to your sim card.
4.Take it to your carrier's repair centre.
popthosegaskets said:
Shouldn't happen, rooting the phone should not cause this problem. I havr rooted my phone many times but it's still working fine. Which method of root did you use and for which firmware?
僕のLT18iから送られてきた
Click to expand...
Click to collapse
this method/ and its on firmware 4.0.4 ICS/4.1.B.0.587
http://forum.xda-developers.com/showthread.php?t=1601038
luiseteyo said:
1. Reboot into recovery, wipe cache, wipe data. Shut down the phone
2. Change baseband with flashtool
3. Power on the phone
Report if it worked please
Click to expand...
Click to collapse
how to get in recovery mode, if last time i try to install CMW but it did not let me/ baseband i change them already and still nothing
luiseteyo said:
1. Reboot into recovery, wipe cache, wipe data. Shut down the phone
2. Change baseband with flashtool
3. Power on the phone
Report if it worked please
Click to expand...
Click to collapse
Success, thank you
I have been having trouble getting my SIM card being detected, and/or getting the phone to display the signal bars after installing a few ROMs on here. I have tried the Liquid Smooth ROM, the Revolution Remix and the Pixel ROM, and have successfully booted into them, however, none of these ROMs detect my SIM card or show any signal meters. I have tried flashing different radios as well, and still, the same result.
Is anyone else having this issue by chance? If so, could someone please let me know what I am doing wrong?
Any/all help is appreciated of course...
justinmjs said:
I have been having trouble getting my SIM card being detected, and/or getting the phone to display the signal bars after installing a few ROMs on here. I have tried the Liquid Smooth ROM, the Revolution Remix and the Pixel ROM, and have successfully booted into them, however, none of these ROMs detect my SIM card or show any signal meters. I have tried flashing different radios as well, and still, the same result.
Is anyone else having this issue by chance? If so, could someone please let me know what I am doing wrong?
Any/all help is appreciated of course...
Click to expand...
Click to collapse
flash single sim 4.3 rom..boot it once then flash ur wish of rom kernel...then flash rom...boot...
re:
ansebovi said:
flash single sim 4.3 rom..boot it once then flash ur wish of rom kernel...then flash rom...boot...
Click to expand...
Click to collapse
okay...thanks i will give this a try and let you know if i have any probs...
ansebovi said:
flash single sim 4.3 rom..boot it once then flash ur wish of rom kernel...then flash rom...boot...
Click to expand...
Click to collapse
Didn't work....
I flashed the single sim 4.3 ROM, but when I rebooted it didnt go any further than then rainbow wave boot animation. I let it sit for 15 minutes in this state and nothing (its supposed to completely boot up until the new device setup screen wizard right?)
Not sure if it was or wasn't supposed to boot into the wizard so I pulled the battery, replaced, flashed the ROM kernel via fastboot, then entered recovery to flash the ROM. Everything went okay with the flash and the ROM booted up correctly but still, no mobile network or SIM card being detected....
justinmjs said:
Didn't work....
I flashed the single sim 4.3 ROM, but when I rebooted it didnt go any further than then rainbow wave boot animation. I let it sit for 15 minutes in this state and nothing (its supposed to completely boot up until the new device setup screen wizard right?)
Not sure if it was or wasn't supposed to boot into the wizard so I pulled the battery, replaced, flashed the ROM kernel via fastboot, then entered recovery to flash the ROM. Everything went okay with the flash and the ROM booted up correctly but still, no mobile network or SIM card being detected....
Click to expand...
Click to collapse
bro 4.3 takes 15-30minutes to boot...just leave it aside for 30mins...
ansebovi said:
bro 4.3 takes 15-30minutes to boot...just leave it aside for 30mins...
Click to expand...
Click to collapse
It has never taken me more than 5 minutes to boot up after flashing. But maybe that's just me.
m duAL
:crying::crying:Hi, I'm Kastvm ROM but the bus does not exist Duval Duval How do I install my ROM's Kastvm
taktaz7575 said:
:crying::crying:Hi, I'm Kastvm ROM but the bus does not exist Duval Duval How do I install my ROM's Kastvm
Click to expand...
Click to collapse
Im sorry, english please.
Hey guys, first i come from VN and my English is not good. Hope everyone can understand.
My device sometimes stop working then auto reboot. The screen auto off and about 3-4 second the led turn red color and the screen turn on then screen blur little with some blur stripe and it auto boot. It's make me scare :"( do you have same problem and what can we do to stop it?
My device still work ok but sometimes this happen.
Thanks.
Try factory reset, otherwise you need to send the device for repair. I do not have any issue with my Z5 the only issue I had was when my MicroSD card stop working (could not write to it could only read) and my device rebooted and slowed down. I replaced my MicroSD card and everything is great since then.
Sent from my SO-03H using Tapatalk
francisamarsingh said:
Try factory reset, otherwise you need to send the device for repair. I do not have any issue with my Z5 the only issue I had was when my MicroSD card stop working (could not write to it could only read) and my device rebooted and slowed down. I replaced my MicroSD card and everything is great since then.
Sent from my SO-03H using Tapatalk
Click to expand...
Click to collapse
Ok maybe i should find another way, i have unlocked BL so i think it is the problem
You not alone same exactly like me your install xpose?
DamBadz said:
You not alone same exactly like me your install xpose?
Click to expand...
Click to collapse
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
dante224 said:
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
Click to expand...
Click to collapse
Ok bro don't worry it look scary i know
DamBadz said:
Ok bro don't worry it look scary i know
Click to expand...
Click to collapse
hey, can you reply Auras79 ? i can't reply bcoz i am a new user. if you can, please said him still his rom but just keep stock sound don't increase volume at http://forum.xda-developers.com/z5-premium/development/ub-romaur-v1-0-xpz5p-170-fast-stable-t3259875
Thanks alot bro:good:
dante224 said:
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
Click to expand...
Click to collapse
I'm 99% sure the reason is that you install custom firmware and xposed module, but mess something up... as a result you get a lot of garbage in System UI and Launcher UI settings.
The common reason of reboots is lag in framework which controlls OVERHEATING...device think that CPU temp is critical and reboots.
So if you are scared about this, my advice is to install clean STOCK firmware,
p.s. but installing of xposed module is fixed already and you can find very detailed guide http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203
and the part of it you need is
Quote:
by @mionica
Anybody who is still having any kind of issues, for whatever reason, please do the following:
get into TWRP;
install, in this order, without rebooting:
xposed-uninstall-v1.1.zip
If you don't have an sd card, you'll need to reboot once after the uninstall .zip, boot the system normally, then get back in the recovery and install the other 3. This only applies to people who don't use an SD card
xzdr-busybox-enable-v1.0.zip
xposed-sdk21-arm-date.zip
xposed-leakplug-v1.2.zip
copy the logs to the PC, over USB:
uninstall_xposed.log
install_busybox.log
install_leakplug.log
each of the 3 zip's will tell you where it saved the log (it's usually the external sdcard)
reboot to system
Thanks in advance for not asking any questions about whether you have to do any of these steps; yes, you have to.
Easy
Cheers
vital21 said:
I'm 99% sure the reason is that you install custom firmware and xposed module, but mess something up... as a result you get a lot of garbage in System UI and Launcher UI settings.
The common reason of reboots is lag in framework which controlls OVERHEATING...device think that CPU temp is critical and reboots.
So if you are scared about this, my advice is to install clean STOCK firmware,
p.s. but installing of xposed module is fixed already and you can find very detailed guide http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203
and the part of it you need is
Quote:
by @mionica
Anybody who is still having any kind of issues, for whatever reason, please do the following:
get into TWRP;
install, in this order, without rebooting:
xposed-uninstall-v1.1.zip
If you don't have an sd card, you'll need to reboot once after the uninstall .zip, boot the system normally, then get back in the recovery and install the other 3. This only applies to people who don't use an SD card
xzdr-busybox-enable-v1.0.zip
xposed-sdk21-arm-date.zip
xposed-leakplug-v1.2.zip
copy the logs to the PC, over USB:
uninstall_xposed.log
install_busybox.log
install_leakplug.log
each of the 3 zip's will tell you where it saved the log (it's usually the external sdcard)
reboot to system
Thanks in advance for not asking any questions about whether you have to do any of these steps; yes, you have to.
Easy
Cheers
Click to expand...
Click to collapse
Dear Sir, im very happy with your's help, everytime i flash Aroma Rom, everytime i have this problem @@ when i used flashtool to flash stock FW .170 My device clearly and this problem not happened @@
tldr; use the LeddaZ build
Downloads:
ROM
Lineage Recovery
Hello XDA,
I'm posting a build using the unified curtana build code that's on github. I have a joyeuse (9 Pro) so I can't really test it on the 9S (curtana). I've been testing it out for a couple of days and haven't had any bugs other than status bar centered items.
Bugs / not working / To do:
Wireguard support Added 18-Sept
Play Store certification (Workaround using MagiskHide Props Config)
64 MP camera module seems to work only with the ANX Camera ver 185(not included). You must manually add all permissions.
Status bar text around the front camera
Code:
Source Code: https://github.com/LineageOS
Device: https://github.com/xiaomi-sm6250-devs/android_device_xiaomi_curtana-unified
Kernel: https://github.com/xiaomi-sm6250-devs/android_kernel_xiaomi_sm6250
Vendor: https://gitlab.com/m0sin/proprietary_vendor_xiaomi_curtana
Play Store certification: Have you tried with the latest gapps yet?
How to install? Anything I need to look at?
dungphp said:
Play Store certification: Have you tried with the latest gapps yet?
Click to expand...
Click to collapse
I have, it might be Magisk or I'm not hiding it properly.
Edit: I used the Magisk HideProps module and everything works fine now. I think the naming, curtana vs joyeuse and version number were causing the issue.
glurak888 said:
How to install? Anything I need to look at?
Click to expand...
Click to collapse
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
I have just installed it, anything I should know?
Installed successful on
Note pro 9 a Joyeuse (global) with 64mp cam , nfc and Lte aka a M2003J6B2G
Only recovery from lineage worked for me ... it also enables fastbootd !!
Rooting with magiskmanager wasnt possible via patching boot.img but flashing Magisk-v20.4.zip via recovery worked .
nfc works too
fastcharge seems so work fine ...
lte seems to work too
will try anx cam and 64 mpx tomorrow ... //edit - ANXCameraUnity_185.SaltyIntelligentPlainsqueaker and 48MPFixQ_170.SophisticatedFatBetafish make it work too ....
thx
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
[email protected] said:
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
Click to expand...
Click to collapse
Yes, install the 48 MP Fix to add the 48 MP camera. It's crashing because you need to manually fix the permissions on the app. After you allow everything it'll crash once then work fine.
Minor update:
September security patch
Added wireguard kernel support 1.0.20200908
moffa~ said:
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
Click to expand...
Click to collapse
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
didicola said:
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
Click to expand...
Click to collapse
Not sure I understand what you are saying. The build is joyeuse/curtana unified. I don't like not being able to flash zips without sideloading so I'm using the PBRP recovery. For the initial flash I used my PC and the Lineage Recovery.
Are the gapps included or do we need to flash them?
kalehrl said:
Are the gapps included or do we need to flash them?
Click to expand...
Click to collapse
Not included. Must be flashed.
Excellent rom, I have used it since its publication, and so far no problem. The performance of the battery seems to me outstanding, and to this day, it is the only one in which an indispensable application for me (Sony Music) works without problem. I hope the excellent work continues, and it even became an official version. Thanks!
I use redmi note 9s, can i flash this rom?
vanmaitrangchu said:
I use redmi note 9s, can i flash this rom?
Click to expand...
Click to collapse
Theoretically yes. Please share your experience if you try it out.
moffa~ said:
Theoretically yes. Please share your experience if you try it out.
Click to expand...
Click to collapse
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
vanmaitrangchu said:
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
Click to expand...
Click to collapse
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
moffa~ said:
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
Click to expand...
Click to collapse
The problem occurs when turning on the speakerphone while calling. End of the call without turning off the speakerphone, the next call will easily lose sound. Ratio 1/5. Trying to turn on and off the speakerphone is very easy to reset the device.
Regarding the 2 sim issue: I mean there is no separate button for the 2 sims in the dial pad. Like the dial pad of the EU version, very convenient.
I need one hand mod, too hight with my hand. like picture.
Hello
I have just updated my redmi note 8 to the miui 12.5.1 and after the phone booted it doesnt want to recognize the SIM cards I have I tester with other cards same issue.
Everything elese work.
My phone is unlocked and I had Msgisk that I lost after the update and the Orangefox recovery cannot decrypt the phone anymore.
I can solve all the other issue but for the SIM issue I couldn't find anything on the internet.
I have Miui global0
the phone was rebooted many times removed and inserted the cards same issue
ssamurai said:
I have just updated
Click to expand...
Click to collapse
It's always the updates
ssamurai said:
it doesnt want to recognize the SIM cards
Click to expand...
Click to collapse
Wifi and camera work ?
ssamurai said:
Orangefox recovery cannot decrypt the phone anymore
Click to expand...
Click to collapse
Flash DFE from an external SDCard if your storage is encrypted ...
loopypalm said:
It's always the updates
Wifi and camera work ?
Flash DFE from an external SDCard if your storage is encrypted ...
Click to expand...
Click to collapse
Im not joking here the phone was working fine, the camera and wifi are working,
ssamurai said:
Im not joking here
Click to expand...
Click to collapse
yes, i know
ssamurai said:
the phone was working fine
Click to expand...
Click to collapse
yes i know , i laugh because everyone phone is always working fine until an update happen
ssamurai said:
the camera and wifi are working,
Click to expand...
Click to collapse
looks like the sensors are fine, so the problem is :
1-corupted value in "data"/"system"
2-the simcard or the sim socket
Ideas :
-test your sim in other phone to make sure it works
-if your "data" is important do a twrp/OFox backup of it, wipe it and reboot to do a new config (If work = good/Not work = system fault)
-if not ("data" not important) ,then do a clean flash of a custom rom and get out of **UI hell ...
loopypalm said:
yes, i know
yes i know , i laugh because everyone phone is always working fine until an update happen
looks like the sensors are fine, so the problem is :
1-corupted value in "data"/"system"
2-the simcard or the sim socket
Ideas :
-test your sim in other phone to make sure it works
-if your "data" is important do a twrp/OFox backup of it, wipe it and reboot to do a new config (If work = good/Not work = system fault)
-if not ("data" not important) ,then do a clean flash of a custom rom and get out of **UI hell ...
Click to expand...
Click to collapse
I recovered my data and went back to 12.01 it works fine now