Develop Bugs

[SOLVED] Rooting HDC Galaxy Note 2 Mega (MTK6577)

Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Edit:
Rooting this device has been made possible by GT35pro. See posts below.

same problem
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad

CWM installed and rooted the HDC galaxy note 2 MAGE / MEGA
rebmoe said:
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
Click to expand...
Click to collapse
I just created the cwm recovery and root. The link is on my blog. The zip file is password protected so be sure to get it from my blog page.
http://gt35pro-mobile-gadgets.blogspot.sg/2013/02/cmw-recovery-english-and-root-for-hdc.html
After you have clockwork mod recovery, use it to flash the root access into the phone.
Have fun!

KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.

londonflu said:
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
Click to expand...
Click to collapse
The one I got did not have that screen calibration problem. Everything works good. Anyway, root is available now.

Superb!
Thank you for sorting this out!
-KristN91

Extra Guide
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!

S_ft_need_download_all_fail (4050)
I'm trying for several days, but always get this error in the flash tool: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Tried on Windows 7 x64, Windows 7 x32 and Windows XP SP3 (x32). Only on the Windows XP computer I was able to make a backup with Flash Tool using the Read Back option.
When I try to flash the red bar goes to 100% then the error message shows...
Does anyone get this error aswell, and did someone manage to solve this?
Please help, I'm in desperate need for root because I need touch screen calibration.
Thnx!!

YES! SUCCES!! I managed to root my HDC Mage :laugh: Did use another method though, check http://forum.xda-developers.com/showthread.php?t=2160490 if you are interested.
Anyway, now back to calibrating the touchscreen. What tools are good do fix touchscreen issues? I already tried http://forum.xda-developers.com/showthread.php?t=934500, but I still am not satisfied.
Thnx :good:

Just curious, if anyone that owns an HDC, is actually located in the USA?

londonflu said:
Just curious, if anyone that owns an HDC, is actually located in the USA?
Click to expand...
Click to collapse
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app

jg77 said:
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because I tried to order 5 different phones from China including Fastcardtech; they couldn't ship for some reason; even got an empty box from ZOPO mobile. I ended up buying the BLU here in the US, I'm kind of glad it happened, since now I have an N'vidia Tegra 4 CPU, that runs circles around the dual-core phones.
I did order one more phone on ebay from China, been waiting for 2 weeks now. MAKES ME WONDER IF THEY EVEN ACTUALLY SHIP TO THE US AT ALL?
Thank to Paypal I was able to get refunded everytime.

KristN91 said:
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
Click to expand...
Click to collapse
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls

thank you

I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls

farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app

jg77 said:
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.

farazafs said:
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
Click to expand...
Click to collapse
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.

jg77 said:
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
Click to expand...
Click to collapse
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.

farazafs said:
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
Click to expand...
Click to collapse
There is something wrong in the layout of the scatterfile. Can you post the logiles of sp flash tool? Just zip them all together.
I have had the exactly the same error with my HDC Mage. I just had to rename a small section of the scatterfile and then it was all good.

rooting HTM GT-T9500 C920-V1.02 MT6589-C920-EN-V05

hello folks,
cant root the following phone:
HTM GT-T9500
C920-V1.02
MT6589-C920-EN-V05
no xray, no z4root, no unlookroot, and so on....
also motochopper tells me "bus error"
asb by hand also no luck
anyone ever rooted such a device or has custom rom for me?
thx in advance
cu

081569 said:
hello folks,
cant root the following phone:
HTM GT-T9500
C920-V1.02
MT6589-C920-EN-V05
no xray, no z4root, no unlookroot, and so on....
also motochopper tells me "bus error"
asb by hand also no luck
anyone ever rooted such a device or has custom rom for me?
thx in advance
cu
Click to expand...
Click to collapse
did you ever figure anything out about this? i just got one of these too. im thinking i totally got RIPPED off!

1. Drivers for windows
View attachment 2262111
View attachment x86.zip
u need to install both driver for 32bits windows XP / W7. Make sure you checked your phone are detected on the device manager
2. Downloading the debug tool and extract it to your document folder
http://www.mediafire.com/download/rngukh111vqfr8h/DEBUG_TOOL.7z
3. Download Recovery img and Super User img and wipe user data pac files , unzip it and u will need it later
View attachment cwm-recovery-S9300-S3.img View attachment SuperuserAndFullBackup.zip View attachment SC6820_Wipe_userdata.7z
4. Open extracted debug tool . go in to channel server > bin > and run channel server (Important)
5. Go into ResearchDownload and run ResearchDownload
6. Click on the first logo to select pac file (SC6820_Wipe_userdata)
7. Click on the 2nd logo and unselect all selection except FDL & checking the recovery option and double click on the empty box to select the cwm-recovery-S9300-S3 file then click ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8.Click Start Downloading
9. Remove your phone battery and reinsert it without power on
10. Plug in the phone to your PC while holding the volume down button
11. Research download should now detect your phone and run downloading recovery. wait for it to finish and it will show green cirle then u can unplug and remove the battery
12. put in the battery , holding power on for 2 second after that press and hole power down (-) button u will see the phone entering recovery mode
13. From the menu go in to mounts and storage select mount USB storage and plugin to your PC. from your PC copy and paste the SuperuserAndFullBackup.zip to your phone storage. After done press go back and select install zip from sd card then select SuperuserAndFullBackup.zip wait until it finish and reboot. u are now ROOTed . make a backup to incase u accidently brick the phone. u can still using the reseach tool to flash back the system.img files from the sd card.
14. WARNING . do not tyring to flash other phone pac files. this will 100% brick ur phone and u got no other way to save it .

there is no custom rom for this phone . just install chainfire3D and plugins. Use downscale texture and some games might load
http://www.4shared.com/download/Qfk...4&dsid=em9v7.b860db6214ed072c1d72ed9674685eb9
others advise do not try to enable HW decoding or composition option. you will very dissapointed with it.

calvin253 said:
there is no custom rom for this phone . just install chainfire3D and plugins. Use downscale texture and some games might load
http://www.4shared.com/download/Qfk...4&dsid=em9v7.b860db6214ed072c1d72ed9674685eb9
others advise do not try to enable HW decoding or composition option. you will very dissapointed with it.
Click to expand...
Click to collapse
Thank you!
UGH no custom roms? pff why doesnt that surprise me?
You know what... Im just going to get rid of the darn thing. This phone BLOWS! I traded my 4 things for it.. granted they were all pretty old things. But I was completely honest with the young man. 10 year old laptop in PERFECT CONDITION, ipod touch 2gen jailbroken w/cydia, craig tablet, and my htc rhyme that had been rooted and flashed to pageplus and it said had like 68mins 2000+text and 300mb data left. IM PISSED! My sons little Obama phone takes better pics than this thing. He lied to me and told me if was the i9500 version. I just glanced at the phone when we made the trade and thought okay cool. PFFF WHATEVER.. it is NOT cool at all lol.
Heck since I got it and checked it out fully... using the phone as a paper weight seems like its all it will be good for. SMH oh well. Such is life. Thank you very much for helping me out. I have some one who is fully aware what the phone is and im probably going to trade it for a HTC Evo 3d.
---------- Post added at 08:54 AM ---------- Previous post was at 08:47 AM ----------
calvin253 said:
1. Drivers for windows
View attachment 2262111
View attachment 2262116
u need to install both driver for 32bits windows XP / W7. Make sure you checked your phone are detected on the device manager
2. Downloading the debug tool and extract it to your document folder
http://www.mediafire.com/download/rngukh111vqfr8h/DEBUG_TOOL.7z
3. Download Recovery img and Super User img and wipe user data pac files , unzip it and u will need it later
View attachment 2262121 View attachment 2262120 View attachment 2262126
4. Open extracted debug tool . go in to channel server > bin > and run channel server (Important)
5. Go into ResearchDownload and run ResearchDownload
6. Click on the first logo to select pac file (SC6820_Wipe_userdata)
7. Click on the 2nd logo and unselect all selection except FDL & checking the recovery option and double click on the empty box to select the cwm-recovery-S9300-S3 file then click ok
View attachment 2262147
8.Click Start Downloading
9. Remove your phone battery and reinsert it without power on
10. Plug in the phone to your PC while holding the volume down button
11. Research download should now detect your phone and run downloading recovery. wait for it to finish and it will show green cirle then u can unplug and remove the battery
12. put in the battery , holding power on for 2 second after that press and hole power down (-) button u will see the phone entering recovery mode
13. From the menu go in to mounts and storage select mount USB storage and plugin to your PC. from your PC copy and paste the SuperuserAndFullBackup.zip to your phone storage. After done press go back and select install zip from sd card then select SuperuserAndFullBackup.zip wait until it finish and reboot. u are now ROOTed . make a backup to incase u accidently brick the phone. u can still using the reseach tool to flash back the system.img files from the sd card.
14. WARNING . do not tyring to flash other phone pac files. this will 100% brick ur phone and u got no other way to save it .
Click to expand...
Click to collapse
Im about to try this anyways... If I do happen to brick it than OH WELL. Not doing me to much good right now as it is lol.

u can always doing a backup roms before u modify any thing. but i only manage to change the speaker with the xperia x8 loud speaker. i just use it as backup incase my phone out of battery. all the damn thing i found out. this phone "suck" haha ... but it's still ok for some 480p movie.
but i just bought it @ USD 80 . So regret for it. better grab used iphone 3gs @ $120.
aprilx0x said:
Thank you!
UGH no custom roms? pff why doesnt that surprise me?
You know what... Im just going to get rid of the darn thing. This phone BLOWS! I traded my 4 things for it.. granted they were all pretty old things. But I was completely honest with the young man. 10 year old laptop in PERFECT CONDITION, ipod touch 2gen jailbroken w/cydia, craig tablet, and my htc rhyme that had been rooted and flashed to pageplus and it said had like 68mins 2000+text and 300mb data left. IM PISSED! My sons little Obama phone takes better pics than this thing. He lied to me and told me if was the i9500 version. I just glanced at the phone when we made the trade and thought okay cool. PFFF WHATEVER.. it is NOT cool at all lol.
Heck since I got it and checked it out fully... using the phone as a paper weight seems like its all it will be good for. SMH oh well. Such is life. Thank you very much for helping me out. I have some one who is fully aware what the phone is and im probably going to trade it for a HTC Evo 3d.
---------- Post added at 08:54 AM ---------- Previous post was at 08:47 AM ----------
Im about to try this anyways... If I do happen to brick it than OH WELL. Not doing me to much good right now as it is lol.
Click to expand...
Click to collapse

calvin253 said:
u can always doing a backup roms before u modify any thing. but i only manage to change the speaker with the xperia x8 loud speaker. i just use it as backup incase my phone out of battery. all the damn thing i found out. this phone "suck" haha ... but it's still ok for some 480p movie.
but i just bought it @ USD 80 . So regret for it. better grab used iphone 3gs @ $120.
Click to expand...
Click to collapse
Do I need to enable usb debugging?

Yes

calvin253 said:
Yes
Click to expand...
Click to collapse
Alrighty then im about to attempt this. I was trying to wait and trade back for my stuff but its not going to happen BOO!

YAY!! THANK YOU A MILLION TIMES!! ! GOT IT! Your the best!
ANOTHER QUESTION...
For the chainfire... should I put it on my sd card and install the zip through recovery? Or should I unzip the files and put them on my sd card and install normally? I know Chainfire is the apk but im not really sure what to do with the plug ins. I want to make sure I dont mess something up.

Please help i need backup
Please i just bricked my phone the same as yours gt t9500 and i don't have a back up can you please send me one i don't know what elese to do
thanks in advance

maromak said:
Please i just bricked my phone the same as yours gt t9500 and i don't have a back up can you please send me one i don't know what elese to do
thanks in advance
Click to expand...
Click to collapse
did you flashing others pac files ? one the uboot is gone there is no way to reverse back

custom ROM
calvin253 said:
did you flashing others pac files ? one the uboot is gone there is no way to reverse back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2244111
this was what i tried to install i tried other stuff now the logo doesn't no more i don't know what to do
i need someone with this phone to give a full backup
thanks anyway

guys can you help me on how to get in to the recovery mode of this phone..? because i didn't get what exactly to do on how to go to recovery mode settings

cybugz said:
guys can you help me on how to get in to the recovery mode of this phone..? because i didn't get what exactly to do on how to go to recovery mode settings
Click to expand...
Click to collapse
Just remove and insert the battery, press and hold power button for 2 second then press button down together until the screen show recovery
Sent from my LG-P895 using xda app-developers app
---------- Post added at 07:27 PM ---------- Previous post was at 07:21 PM ----------
I can't help you. I don't have that phone anymore. Try ask the other guy upload for you
Sent from my LG-P895 using xda app-developers app

help!!!
i have followed all these steps (even 3 times lol) and still the phone will not go into recovery menu.....what am I doing wrong??

I have done it i unbricked it!!yeahh who's the man who's the man?? humm? you baby you
I did it after a lot of time spent i revived it
i want to thank the help of forum.china-iphone.ru portal without it i could never done it
my phone only turned on the screen no logo nothing else and only turned on when connected usb to computer and it was in loop boot mode
with research download it was done and it was all because of a beta rom novadroid that the author said it was for NovaDroid for GT-I9300
i thought the sc6820 could work with it and totally bricked the phone i almost gave up i took it to a shop and the technician said it was a spare prat burned can you imagine i didn't believe because i knew what was the prob
i done it with a pac but now it is not won the war because i have no sound no wifi and other stuff going wrong but to see it working it is a happy day i almost gave up
now i am trying to fix it and put it 100% perfect
if need help contact me with SPRD GT-T9500 sc6820

Research download
Hi people friend xda's!
when using research download don't forget uncheck in calibration menu otions
take out the battery and the button you go into download mode or recovery pu**** until put the battery again and connect the cable on windows XP
if follow these stepas most likely will work
now my problem is i put a ROM "6820_2.3.5_c920_hteng_s13_en_3d_v01_bin-3D英文130524.pac" in a GT-T9500 sc6820 the specs are in the photo post above and now i have no network no wifi the flash turns on randomly no sound!!!
if someone have the backup or original ROM please send me pleas PM or if someone know how to help me
i successfully rooted this phone with those specs using VROOT you have a english version one click root very easy
www1.datafilehost.com/d/e2841c1a (VROOT) copy paste due to the 10 post anti spammers
Thanks a lot guys

Mr Maromak i need your help .. please i need download ROM "6820_2.3.5_c920_hteng_s13_en_3d_v01_bin-3D英文130524.pac"
Please share link to download rom thanks

Link to ROM
Friend cobba here is the link you have asked hope it helps you if you have the original ROM for GT T9500 please send to me
https://docs.google.com/file/d/0B3348OEzDncJMG5FYjlYcGluQ1U/edit?usp=sharing&pli=1
---------- Post added at 04:53 AM ---------- Previous post was at 04:43 AM ----------
maromak said:
Friend cobba here is the link you have asked hope it helps you if you have the original ROM for GT T9500 please send to me
https://docs.google.com/file/d/0B3348OEzDncJMG5FYjlYcGluQ1U/edit?usp=sharing&pli=1
Click to expand...
Click to collapse
cheers

How to make a perfect unrooted

HOW TO MAKE A PERFECT UNROOTED
ATTENTION
Before continuing, make... BACKUP, BACKUP, BACKUP, ...
If rooted ever your phone system detects it, and if you enter in Download this screen will look
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the box below you can read:
B73 and B100 = This is the State of the battery
Click to expand...
Click to collapse
And one of these three States:
ROOTED (Red) = The phone is rooted
UNROOTED (Pink) = The phone is not rooted, but once rooted. THIS STATE I'VE NEVER SEEN
UNROOTED (White) = The phone was never rooted.
Click to expand...
Click to collapse
According to the European legislation a terminal may be rooted without so we lose the warranty, but instead to use the phone we have to accept LG conditions that say that we can not customize the phone.
As it seems, commented by Spanish users that took your phone Technical Assistance Service (T.A.S.) still this rooted and with installed CWM, T.A.S. spent in warranty, so this method is not necessary, but you never know with whom you can bump sat, so here you have remove the ROOT and leave the phone as something out of factory.
UNROOTED METHOD
INFORMATION
This method serves to take the phone to the T.A.S., or if you want to leave it clean.
Download a ROM to your terminal, operated and country, use this link LG Phone Firmware G2
It enters to the CWM or TWRP Recovery.
Now get from:
CWM - Wipe Data / Factory Reset
TWRP - Advanced Wipeo, and the beams all but the SD.
Go to the reset menu or advanced and click on turn off.
While you press Volume+ connect the USB to the PC, enter Download Mode, as the images above
It runs Windows and follow this LG G2 Stock Firmware (Go Back to Stock)
Click to expand...
Click to collapse
CHECK IF IS or IS NOT ROOTED
In the dial pad type:
For the D800 3845#*800#
For the D801 3845#*801#
For the D802 3845#*802#
ETC
Go to the bottom of the menu and click on LG RCT then to Display Result
There are two possible results, Not rooted or Rooted
Click to expand...
Click to collapse

You are here too?! God Blessed G2 !

Gosh thanks so much!! I initially thought that the D802 doesn't have a root trip whoops.
Sent from my LG-D802 using xda app-developers app

TWRP - Advanced Wipeo, and the beams all but the SD.
Click to expand...
Click to collapse
Include internal storage, or not?

one problem with all that - "UNROOTED (White) = The phone was never rooted." should read "UNROOTED (White) = The phone isn't rooted at this time."
my d802 always returns to that state after I unroot and go back to stock I have to do 2 x full factory reset and using the power button down and vol down trick then if you go into download mode it always shows as unrooted in white.

Homero2 said:
HOW TO MAKE A PERFECT UNROOTED
ATTENTION
Before continuing, make... BACKUP, BACKUP, BACKUP, ...
If rooted ever your phone system detects it, and if you enter in Download this screen will look
In the box below you can read:
CHECK IF IS or IS NOT ROOTED
Click to expand...
Click to collapse
Hi, is it going reset root triper?? And, phone would still say rooted or unrooted! please advise.

twiztednibbz said:
one problem with all that - "UNROOTED (White) = The phone was never rooted." should read "UNROOTED (White) = The phone isn't rooted at this time."
my d802 always returns to that state after I unroot and go back to stock I have to do 2 x full factory reset and using the power button down and vol down trick then if you go into download mode it always shows as unrooted in white.
Click to expand...
Click to collapse
I don't understand what you mean
You say that there is an easier way of unrooted?

Homero2 said:
I don't understand what you mean
You say that there is an easier way of unrooted?
Click to expand...
Click to collapse
basically I cannot talk for any other model apart from d802 as this is what I have. but basically all you need to do to get it to show unrooted is to download the lg mobile support tool > open it > plug in usb while holding power and vol up with phone OFF to get into download mode > open the LG mobile support tool > go to options (top right) and press upgrade recovery.... the tool will download the original stock firmware onto the pc then install it on the phone. DO NOT unplug it until 100% on the PC. the phone will reboot about 80% on the pc but phone will have reached 100%. next do 2 factory resets using the power button and vol up method and you will find the unrooted status re-appears if you go back into download mode. Its also worth noting that it works best and flawlessly on com port 4 some ppl have experienced issues on other com ports.
obviously I accept no responsibility for you breaking your phone if you try it but I have done this at least 70 x to get out of bad fashes and it works every single one.
takes you about 30 min for the file to download but without that file downloading its probably about 5 minutes user input the longest/hardest bit being getting into the factory reset screen. lol.

twiztednibbz said:
basically I cannot talk for any other model apart from d802 as this is what I have. but basically all you need to do to get it to show unrooted is to download the lg mobile support tool > open it > plug in usb while holding power and vol up with phone OFF to get into download mode > open the LG mobile support tool > go to options (top right) and press upgrade recovery.... the tool will download the original stock firmware onto the pc then install it on the phone. DO NOT unplug it until 100% on the PC. the phone will reboot about 80% on the pc but phone will have reached 100%. next do 2 factory resets using the power button and vol up method and you will find the unrooted status re-appears if you go back into download mode. Its also worth noting that it works best and flawlessly on com port 4 some ppl have experienced issues on other com ports.
obviously I accept no responsibility for you breaking your phone if you try it but I have done this at least 70 x to get out of bad fashes and it works every single one.
takes you about 30 min for the file to download but without that file downloading its probably about 5 minutes user input the longest/hardest bit being getting into the factory reset screen. lol.
Click to expand...
Click to collapse
How do you choose which com port to use? Yes, I've experienced issues with com port 5
Sent from my LG-D802 using xda app-developers app

mab71 said:
How do you choose which com port to use? Yes, I've experienced issues with com port 5
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
ok so if press the start button on windows then type in device manager in the little box at bottom and press enter it will open up.
now put the phone in download mode (be sure to use a rear usb port too, then when the pc recognizes it go to your device manager, it will show Ports (COM & LPT) in the list and when you press the little plus sign to the left of the name you will see the phone and the port number being used. i.e. LGE AndroidNet USB Serial Port(COM7).
right click it and press properties > port settings tab > advanced > the COM port number is at the bottom of the box click it and select 4. it will probably tell you something else is using it but that is fine it makes no difference click ok then yes and ok again. Now your phone should show as COM Port 4 in the device manager. now close device manager and carry on using lg support tool.

twiztednibbz said:
basically I cannot talk for any other model apart from d802 as this is what I have. but basically all you need to do to get it to show unrooted is to download the lg mobile support tool > open it > plug in usb while holding power and vol up with phone OFF to get into download mode > open the LG mobile support tool > go to options (top right) and press upgrade recovery.... the tool will download the original stock firmware onto the pc then install it on the phone. DO NOT unplug it until 100% on the PC. the phone will reboot about 80% on the pc but phone will have reached 100%. next do 2 factory resets using the power button and vol up method and you will find the unrooted status re-appears if you go back into download mode. Its also worth noting that it works best and flawlessly on com port 4 some ppl have experienced issues on other com ports.
obviously I accept no responsibility for you breaking your phone if you try it but I have done this at least 70 x to get out of bad fashes and it works every single one.
takes you about 30 min for the file to download but without that file downloading its probably about 5 minutes user input the longest/hardest bit being getting into the factory reset screen. lol.
Click to expand...
Click to collapse
OK, I have personally tried port 5, and 45 port and not have had problems, since this method which I intend to use the official program, with the difference that we say you must firmware flasher.
Thank you for your information, I used the method proposed for some years with my KM900 and my P990, and I have to say that it works perfectly, and not only that, also the firmware that is installed is suitable to the country, model and telephone operator.
The two methods do the same thing, but his left it because I sometimes giving problems, there were times that said that the firmware that had was the more modern and wouldn't update, I am referring to below the D802 models
PD:
Factory Reset does so from 3845#*802#?

Homero2 said:
OK, I have personally tried port 5, and 45 port and not have had problems, since this method which I intend to use the official program, with the difference that we say you must firmware flasher.
Thank you for your information, I used the method proposed for some years with my KM900 and my P990, and I have to say that it works perfectly, and not only that, also the firmware that is installed is suitable to the country, model and telephone operator.
The two methods do the same thing, but his left it because I sometimes giving problems, there were times that said that the firmware that had was the more modern and wouldn't update, I am referring to below the D802 models
PD:
Factory Reset does so from 3845#*802#?
Click to expand...
Click to collapse
yeah I agree I have tried upto 9 different ports now and all seem to work for me but that is not the case for everyone. I know the whole process is supposed to be done on port 4 which is why I suggested it.
you are most welcome if I help but one person with my ramblings then that's a plus...
yes very true that it will put on the correct firmware for country model and telephone operator!
I have also encountered the same problems myself and this method I have never ever ever experienced one.

twiztednibbz said:
takes you about 30 min for the file to download but without that file downloading its probably about 5 minutes user input the longest/hardest bit being getting into the factory reset screen. lol.
Click to expand...
Click to collapse
Hello! Does your method work with a custom recovery and after the reset will it be gone?

i unrooted my D802 and when it was done my storage reduced from 32gb to 10gb . do you have any idea how to fix it?

What are differences between 10A-10B-20A-20B? I have a 16 GB Italy H3G D802, which rom have I to download?

I've checked a logs and found that com.lge.hiddenmenu.RCT_Check/RootingCheckActivity is running during that flow.
Then, dumped all framework and app files and searched for that activity.
Founded in HiddenMenu.odex file, deodexed ...
Actually they are reading value from that file: /persist/rct.cfg
There is second file that this activity cheks: /persist/rct
There is a logic there if file not exist /persist/rct then show RCT check disabled.
May be that will permanently disable root check?
There could be some other application (service or script) that actually doing root check and write this rct.cfg file.
---------- Post added at 03:59 PM ---------- Previous post was at 03:15 PM ----------
Tried to remove that two files.
But device restoring them after rebooting.
Needs to find a way how to log who is accessing that file.

Excuse me, I cannot understand.
I have to:
1 - Install CWM or TWRP
2 - Make a Full Wipe using CWM or TWRP
3 - Update firmware using normal procedure wich downloads and install the correct firmware on my phone
Is this correct?
I ask because doing only the 3rd point I still have "rooted" in download screen.
Perhaps I am missing the full wipe in TWRP.
Any help appreciated

OK, found description for rctd tool
Some workaround:
1. If you create two folders in target folder with the same names as that rct and rct.cfg names than rctd won't able to overwrite then, and from hidden menu device won't display rooted status;
2. Remove rctd tool and put clean files rct and rct.cfg from the unrooted device. Files could be found there.
But still OTA detect root

Redwid said:
OK, found description for rctd tool
Some workaround:
1. If you create two folders in target folder with the same names as that rct and rct.cfg names than rctd won't able to overwrite then, and from hidden menu device won't display rooted status;
2. Remove rctd tool and put clean files rct and rct.cfg from the unrooted device. Files could be found there.
But still OTA detect root
Click to expand...
Click to collapse
Ok, looks like from 4.4.2 rtcd no longer exists but you need the files in /persist folder.
So this should not be a problem.
You root only adb, you take the files and put them in a safe place.
You do whatever you want.
You restore the 2 files (while you're root)
You do a full wipe and a firmware recovery.
Thos should take it to a total unroot phone.
Am I right?

lmerega said:
Ok, looks like from 4.4.2 rtcd no longer exists but you need the files in /persist folder.
So this should not be a problem.
You root only adb, you take the files and put them in a safe place.
You do whatever you want.
You restore the 2 files (while you're root)
You do a full wipe and a firmware recovery.
Thos should take it to a total unroot phone.
Am I right?
Click to expand...
Click to collapse
Sorry, don't know. I'm trying to find a way install OTA update on rooted device.
Don't like to do a full wipe.
---------- Post added at 10:28 AM ---------- Previous post was at 09:34 AM ----------
BTW to find out if you have root checker do this command in the shell:
Code:
ps | grep rctd

Out Of The Blue ZE551ML Internal Storage No Longer Accessible In Windows 7

I only connect my ZE551ML to my Windows 7 x64 when I've got to do firmware updates or transfer music, and I haven't done either in a while.
On my "MTP USB Device" driver I'm now getting: This device cannot start. (Code 10)
The ASUS Android Composite ADB and PC Link Interface drivers are loaded and fine.
Things that I've tried:
- the Asus android drivers
- the Intel android drivers
- the universal ADB drivers.
- different USB cables
- different USB slots
The perplexing thing is that the image that allows you to install "ASUS ZenUI PC Suite" is available as a CD drive, "PC Link" works when mirroring my phone onto my computer and using ADB from a command prompt can see my device.
I don't know what I've installed between the last time it worked to now, and I'm at wit's end with what I can do.
Anyone have a suggestion at a possible next step?

Do you by any chance have Windows 7N (one without media player)?

Mine did the same when i connected the missus MTK device.
Unfortunately i need hers to stay for future updates and for using MTK flashtools too.
Great news is the( share link ) built in asus app in M - never used it before until this , click asus share link app on phone whilst connect to PC (for the first installation) and then you can transfer to an from pc to sd (either sd) in share link settings.
Then after - uses your network for transfer ,no cables , saves charge port i guess and its -- Fast !
USBdeview can be used if you want to see/want/remove if old/new drivers might be causing conflicts but am quite happy with the share link app now,ps i`m on windows 10 and too also not sure whether an update came whilst installing MTK destroyed it too

chiudikas said:
Do you by any chance have Windows 7N (one without media player)?
Click to expand...
Click to collapse
No, I'm running Home Premium, and have both media player and media center.
timbernot said:
Mine did the same when i connected the missus MTK device.
Unfortunately i need hers to stay for future updates and for using MTK flashtools too.
Great news is the( share link ) built in asus app in M - never used it before until this , click asus share link app on phone whilst connect to PC (for the first installation) and then you can transfer to an from pc to sd (either sd) in share link settings.
Then after - uses your network for transfer ,no cables , saves charge port i guess and its -- Fast !
USBdeview can be used if you want to see/want/remove if old/new drivers might be causing conflicts but am quite happy with the share link app now,ps i`m on windows 10 and too also not sure whether an update came whilst installing MTK destroyed it too
Click to expand...
Click to collapse
I'm still on Lollipop... Though it does have a sharelink app as well. I've tried setting it up, and on my phone it can't see my microSD card.
I'll give USBdeview a go and see if uninstalling all the Samsung/Asus/Intel drivers does anything.
It's the strangest thing... why would I be able to see it in ADB, be able to install the PC Link programs from the ROM and yet not be able to see internal storage?

azthemansays said:
No, I'm running Home Premium, and have both media player and media center.
I'm still on Lollipop... Though it does have a sharelink app as well. I've tried setting it up, and on my phone it can't see my microSD card.
I'll give USBdeview a go and see if uninstalling all the Samsung/Asus/Intel drivers does anything.
It's the strangest thing... why would I be able to see it in ADB, be able to install the PC Link programs from the ROM and yet not be able to see internal storage?
Click to expand...
Click to collapse
Share link app - 3 dots -settings - storage location - click on /sdcard -- opens up to show internal sd and whatever your ext sd is called --select your choice -- click OK , you may have to allow rights to it in file manager :good:
Usbdeview should be ok
Why it happens ? conflicts with drivers i suspect

timbernot said:
Share link app - 3 dots -settings - storage location - click on /sdcard -- opens up to show internal sd and whatever your ext sd is called --select your choice -- click OK , you may have to allow rights to it in file manager :good:
Click to expand...
Click to collapse
That's the issue, when I get to that point it only shows "Internal Storage." As an aside, my phone's bootloader is unlocked and it's rooted.
*EDIT* - When I get to the part where I choose the directory, the file manager comes up with the "Recent" page. if I press the menu button, I get the option to hide SD card and file size, but in the list to the left it only lists "Internal Storage"
timbernot said:
Usbdeview should be ok
Why it happens ? conflicts with drivers i suspect
Click to expand...
Click to collapse
I just removed all the drivers that I could tell were related and am about to reboot.

phone settings - storage -- eject sd -- remount , set up sd for ext storage ? Never used this before so am at a loss , my ext sd was there when i clicked on /sdcard along side internal and after OK i followed on screen commands to allow it . Again , this is in M and never used it before on LP.
When you open file manager , your sd is there alongside internal or blanked out ?
Good luck hope you get it sorted , keep us posted BBFN

timbernot said:
phone settings - storage -- eject sd -- remount , set up sd for ext storage ? Never used this before so am at a loss , my ext sd was there when i clicked on /sdcard along side internal and after OK i followed on screen commands to allow it . Again , this is in M and never used it before on LP.
When you open file manager , your sd is there alongside internal or blanked out ?
Good luck hope you get it sorted , keep us posted BBFN
Click to expand...
Click to collapse
Still run into the same issue after remounting. It lets me select my internal, but not my SD. I guess it'll have to do for the time being - use it to move from computer to internal, then move it from internal to external.
And Removing selective ones in USBdeview still gave me the same issue:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so I went ahead and uninstalled all the ones that were for the specific USB slot, and am about to reset. Fingers crossed...

Ok try the info in ASUS file manager
open file manger , 3 dots , about , help and feedback , 2nd box down
ps , the time you spent trying to fix this
upgrade to M latest , better battery etc etc

timbernot said:
Ok try the info in ASUS file manager
open file manger , 3 dots , about , help and feedback , 2nd box down
ps , the time you spent trying to fix this
upgrade to M latest , better battery etc etc
Click to expand...
Click to collapse
I can't upgrade to M without being able to transfer files to my phone :laugh::crying:
And more importantly, I don't know if upgrading would change anything when it comes to the Windows 7 drivers. I keep trying to update driver to the Asus ones, but it keeps reverting to the generic "MTP USB Device" one. I've even tried to go into the windows inf files and remove that generic driver, but then windows won't accept the Asus ones at all.
When I go into the "feedback and help" section I get an error:
I've just about had it up to here with this phone. At the beginning it was giving me similar issues but I managed to sort it out... and now we're back to the issues that occurred back near the phone's launch. Full goddamn circle.

What build /date in settings ?
We gonna get you updated v soon .
First you need to unroot it.
Then fastboot flash stock recovery which corresponds with your build..
Then adb sideload a fresh copy of the build your on .You know how to perform these tasks above ???
If not , we do it soon
last but least don't smash it up
Have a read thru here to get general idea what needs doing
http://forum.xda-developers.com/zenfone2/help/how-recovery-t3514205
---------- Post added at 02:53 AM ---------- Previous post was at 02:44 AM ----------
azthemansays said:
I can't upgrade to M without being able to transfer files to my phone :laugh::crying:
And more importantly, I don't know if upgrading would change anything when it comes to the Windows 7 drivers. I keep trying to update driver to the Asus ones, but it keeps reverting to the generic "MTP USB Device" one. I've even tried to go into the windows inf files and remove that generic driver, but then windows won't accept the Asus ones at all.
When I go into the "feedback and help" section I get an error:
I've just about had it up to here with this phone. At the beginning it was giving me similar issues but I managed to sort it out... and now we're back to the issues that occurred back near the phone's launch. Full goddamn circle.
Click to expand...
Click to collapse
keep cal.m

timbernot said:
What build /date in settings ?
We gonna get you updated v soon .
First you need to unroot it.
Then fastboot flash stock recovery which corresponds with your build..
Then adb sideload a fresh copy of the build your on .You know how to perform these tasks above ???
If not , we do it soon
last but least don't smash it up
keep cal.m
Click to expand...
Click to collapse
Haha, thank you. I'll try to stay calm.
I'm sitting at 194 right now and the security patch level was last updated July 1, 2016.
This phone is my daily driver and I need to go to bed, but I'll Titanium Backup the apps and make a nandroid backup tomorrow as soon as I get home from work so I can start flashing.
It's been awhile... should I flash back the stock recovery before I unroot? And it's been giving me issues with the micro SD card occasionally unmounting on it's own as well as Google Play services crashing at random times (I've tried all the tricks & tips up to uninstalling it to get rid of corrupted installation, but it still persists)... Should I do a factory reset after flashing the stock image just to try to clear everything up? I'd have to move everything to my microSD card first though...

azthemansays said:
Haha, thank you. I'll try to stay calm.
I'm sitting at 194 right now and the security patch level was last updated July 1, 2016.
This phone is my daily driver and I need to go to bed, but I'll Titanium Backup the apps and make a nandroid backup tomorrow as soon as I get home from work so I can start flashing.
It's been awhile... should I flash back the stock recovery before I unroot? And it's been giving me issues with the micro SD card occasionally unmounting on it's own as well as Google Play services crashing at random times (I've tried all the tricks & tips up to uninstalling it to get rid of corrupted installation, but it still persists)... Should I do a factory reset after flashing the stock image just to try to clear everything up? I'd have to move everything to my microSD card first though...
Click to expand...
Click to collapse
First - transfer your stuff to pc off internal thru sharelink
unroot , flash back stock recovery .194 - reboot to recovery , update over adb , adb sideload .196 stock firmware , which should be renamed to MOFD_SDUPDATE and put in your fastboot/adb folder previously
adb cmd >
adb sideload MOFD_SDUPDATE.zip
set up not connecting to wifi - skip everything you can-- factory reset .
Set up correctly this time . Run for 3 days without any modifications . Make sure everything is running correctly :good:

timbernot said:
First - transfer your stuff to pc off internal thru sharelink
Click to expand...
Click to collapse
Already running into issues with the first step. Share Link gets to about 100mb transferred, then my phone's screen blacks out and is non-responsive, though it shows touchscreen presses (I have that turned on in developer settings). The transfer hits around 200mb and then the transfer gets cancelled. It's also rebooted twice.
This is getting to ludicrous levels.
*EDIT* - I tried uninstalling all the USB controllers in Windows Device manager in case they were corrupted, but I'm still getting the same failure with the generic "MTP USB Device" being installed instead of the Asus one and still getting that yellow exclamation mark. When I try to update it to the Asus one, it fails and disappears when I unplug and replug the phone. This is maddening because it was working in October...
*EDIT 2* - I'm thinking of testing it on another windows installation... I've got some spare HD space that i could partition and install another copy of my Win 7 on to see if it's my Windows or phone that's corrupted. If it's not my phone, I'll be able to transfer everything out...

Hey some news , after reading what you are experiencing - I remembered i have another lappy with windows 10 on in bedroom wardrobe - Not been used for nearly a yr , fired it up with wifi off and both my drives are visible
So , mine IS either MTK driver conflict or a windows update or both
Whatever , i will update it today and test further.
This does`nt explain your sharelink probs tho, mine transferred 443mbs of CM14.1 in 3 mins just now with the same prob you have.
Use file manager instead to transfer to ext SD. Instead of sharelink
And go about sorting it out , with whats already mentioned and with the fresh copy of 7 - hopefully it is windows and not the phone you said you had probs with from new

So it failed to install the driver in the new Windows 7 install, but somehow booting into recovery allowed me to access and copy everything off of internal storage. But of course, booting back into normal mode breaks it again.
I'm just going through backing up my SMS and using Titanium backup for the apps and I'll be ready to take the next step.

azthemansays said:
So it failed to install the driver in the new Windows 7 install, but somehow booting into recovery allowed me to access and copy everything off of internal storage. But of course, booting back into normal mode breaks it again.
I'm just going through backing up my SMS and using Titanium backup for the apps and I'll be ready to take the next step.
Click to expand...
Click to collapse
Are you familiar with flashtools ?
It's just another method to flash a raw file in fastboot boot loader state .and boots you into system by itself after about 10 mins..but I'm a bit unsure you should use it with the probs re screen blanking earlier with share app.
Maybe we keep that as a last resort
good luck

timbernot said:
Are you familiar with flashtools ?
It's just another method to flash a raw file in fastboot boot loader state .and boots you into system by itself after about 10 mins..but I'm a bit unsure you should use it with the probs re screen blanking earlier with share app.
Maybe we keep that as a last resort
good luck
Click to expand...
Click to collapse
My usual method of Flashing OTAs and ROMS was using this guide. I'm not familiar with flashtools, but I've used Odin before and I'm a quick study.
Now, I've got a few things that I would normally take back to stock/remove before unrooting and updating:
- Adaway hosts files
- busybox
- Viper4android sound.conf mod
- build.prop modification for permissive SELinux
- might be more but I can't remember.
I also recall flashing a new kernel at some point, but it was a while ago and I don't remember how to find out if what I have now is stock or not. I think it was this one.
Do I need to worry about taking all that back to stock before reflashing .194?
I usually edit the OTAs so I could flash them with TWRP, so I never had to flash stock recovery back in the past... what's the ADB name for the recovery partition?
*EDIT* - I'm also not familiar with all this new stuff like Magisk 8 and seamless root. Is this the go-to method for rooting 6.0? I like the sound of being able to root and unroot on the fly to bypass root detection by apps. I think I want to flash CleanSTOCK rather than just stock MM if it's less bloated.

azthemansays said:
My usual method of Flashing OTAs and ROMS was using this guide. I'm not familiar with flashtools, but I've used Odin before and I'm a quick study.
Now, I've got a few things that I would normally take back to stock/remove before unrooting and updating:
- Adaway hosts files
- busybox
- Viper4android sound.conf mod
- build.prop modification for permissive SELinux
- might be more but I can't remember.
I also recall flashing a new kernel at some point, but it was a while ago and I don't remember how to find out if what I have now is stock or not. I think it was this one.
Do I need to worry about taking all that back to stock before reflashing .194?
I usually edit the OTAs so I could flash them with TWRP, so I never had to flash stock recovery back in the past... what's the ADB name for the recovery partition?
*EDIT* - I'm also not familiar with all this new stuff like Magisk 8 and seamless root. Is this the go-to method for rooting 6.0? I like the sound of being able to root and unroot on the fly to bypass root detection by apps. I think I want to flash CleanSTOCK rather than just stock MM if it's less bloated.
Click to expand...
Click to collapse
Lets just get you up and running stock for a few days -- No mods ok ?
I think its best we flash raw at bootloader state , refresh here i will add files to download ready and info how to:good:
Flashtools - http://www.mediafire.com/file/sm76jyyz8t1axmz/AsusFlashToolInstaller_1.0.0.17.rar install and run as admin
Raw collection of and thanks go to Realyoti there - choose .196, bottom one last of the LP
https://yadi.sk/d/FijRoAVJtvRiG
Video
Ignore the first 2:17 mins - fast forward to 2:18 mins for flashtool flash and adding raw and general settings > choose wipe data to prevent any bugs from previous state
Note -- you just let it complete on its own , the video goes to show how to correct serial number , you dont need to -- once it starts flashing - let it finish
https://www.youtube.com/watch?v=PmbRaJijIBs&feature=youtu.be
When up n running say a thank you to Realyoti here please
http://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966

timbernot said:
Lets just get you up and running stock for a few days -- No mods ok ?
Click to expand...
Click to collapse
Haha, sorry for putting the cart before the donkey at the end there...
But I was asking if I need to remove any/all of these mods before flashing the raw file? And does the raw file also include the recovery partition? That's why I was asking where to flash "recovery.img" to go from TWRP to stock recovery...
Just 19% into transferring all my Titanium backups to Google Drive right now.

who one have storage issue here is solution

Now dear friends I will give the solution of problems that occur after unbrick leeco pro3 who has internal storage problem like this
infinite thanks to my Chinese friend Hua found this solution by itself and thanks tora33 from leeco.re and mbtt from forum.one-teams(i use picture from him)
I'm not in charge of the operation to be performed, is designed to assist you in these processes
Charge your mobile phone
1) download : qfil, (that have correct partition) and put in C:/
https://yadi.sk/d/piVn4bpf3MqcHC
2) download : FlashOne1,9 , put in a folder and extract it ,
https://yadi.sk/d/PmVChpqZ3Mj2hz
3) download :fastboot rom
https://yadi.sk/d/uzdwFhie3MqcJs
4)download qq driver
https://yadi.sk/d/U4SIDH3B3Mixsh
run "FlashOne1,9"
How to qfil Flash
When select qfil flash type, press power key, volume up and volume down key at the same time, then the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press ‘Refresh’ button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.
Select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool can’t get hardware information, you should check if the software and hardware is matching yourself.)
Press ‘Flash’ button, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, ‘Decompression folder is exist, re-decompress or not?’ dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress(for me the bar not move stuck %1 i did wait 15minute then unplug phone and push power button long time, and at the same time, the flashing log will also be shown on UI.
After flash complete or error happened, a notification dialog will pop up.
after phone start go boot logo and wait by the way open fastboot rom and push le_zl1_fastboot
everyting go fine u get 24gb for 32gb phone and 54gb for 64gb phone
good luck i hope help you

Thanks
Work on x720 ...

Will this work on Custom OMNI rom please?

krugerbud said:
Will this work on Custom OMNI rom please?
Click to expand...
Click to collapse
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!

lazye53 said:
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
Click to expand...
Click to collapse
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?

krugerbud said:
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
Click to expand...
Click to collapse
This issue is only for those who are missing storage.
If you have another storage problem, look for another solution.

Storage Problem LeEco Le Pro 3 X720 - 4 GB/32 GB
I followed instructions but it didn't work.
What can I do in order to increase storage to 24 GB?

qfil mode error
Is it for restoring the original storge capacity for Le Pro 3? The reason why I'm asking this is becuase I am currently stuck on qufil rom because it keeps making error everytime I tried to go to the launcher. Will it work on my circumstance?