I'm hard working, trying to recover my zenphone2,
When I connect to usb, the charge screen work as usual, but when i try to turn on, crash on asus screen.
When i try to recover it using xFSTK, plugging into pc and pressing volume down, my device is not recognized on "Intel Soc" category this is the only thing that bother me.
I don't know how to proceed, i recovered many times my phone from brick, but this time i can't because did not recognize the USB on windows.
Anyone can help, give me a tip to recognize the usb?
Thanks
After hours trying..
I started do randomly press volume down , up and power.. and i gone to boot select menu !
rvitor said:
After hours trying..
I started do randomly press volume down , up and power.. and i gone to boot select menu !
Click to expand...
Click to collapse
Volume up during boot
Sent from my ASUS_Z00AD [MM .352] [Unlocked MaGisK]
Related
So i've been trying to root my phone for quite some time and everytime it fails.
I recently found this http://forum.xda-developers.com/forumdisplay.php?f=1533#tutorial
Everything was working fine until i got to the part ( fastboot oem get_identifier_token.) When i type that in it would just say
(Waiting for device) and never does anything for a long time.
also when i click my power button and volume down at the same time it does not go in fast boot mode for some reason and i have no idea why!
so does anyone have any solutions?
Just hold down the power and vol down and wait until the bootloader shows up, then use vol to scroll until you can select fastboot, then plug into a usb port.
Also, try a different usb port on your computer. Not sure why this sometimes works, but sometimes it does. Sometimes.
requiem11 said:
Just hold down the power and vol down and wait until the bootloader shows up, then use vol to scroll until you can select fastboot, then plug into a usb port.
Also, try a different usb port on your computer. Not sure why this sometimes works, but sometimes it does. Sometimes.
Click to expand...
Click to collapse
Thank you! that miraculously worked somehow aha !
I know right! Crazy.
After wiping out data and cache in CMW recovery, my phone automatically shuts down. now it wont turn on even by pressing the power button + vol+ or vol- . I Tried flashing stock firmware using the latest flashtool but it says * device connected with USB debugging off * . i left the phone plugged in to charge but only red light appears for hours and it still wont turn. Red light turns off every now and then . Please help i dont know what to do please help . What do i need to do get my phone working again ?
xxlongstarxx said:
After wiping out data and cache in CMW recovery, my phone automatically shuts down. now it wont turn on even by pressing the power button + vol+ or vol- . I Tried flashing stock firmware using the latest flashtool but it says * device connected with USB debugging off * . i left the phone plugged in to charge but only red light appears for hours and it still wont turn. Red light turns off every now and then . Please help i dont know what to do please help . What do i need to do get my phone working again ?
Click to expand...
Click to collapse
Try doing this.. Hold Volume Up and Power button until u get 3 vibrations after the 1st vibration.. Then put it to charge.. And if u r seeing a charging animation, let it charge fully.. And then try rebooting.. If it doesn't turn on, just flash stock ftf.. Hold volume down and connect the cable.. Don't let go of the volume down button until flashing starts..
sudhindrakv said:
Try doing this.. Hold Volume Up and Power button until u get 3 vibrations after the 1st vibration.. Then put it to charge.. And if u r seeing a charging animation, let it charge fully.. And then try rebooting.. If it doesn't turn on, just flash stock ftf.. Hold volume down and connect the cable.. Don't let go of the volume down button until flashing starts..
Click to expand...
Click to collapse
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
xxlongstarxx said:
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
Click to expand...
Click to collapse
Then i think u have some H/W problem.. May be something to do with Motherboard.. Get it serviced with Sony Service Center.. Tell them some joke excuse...
xxlongstarxx said:
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
Click to expand...
Click to collapse
Can you connect it in fastboot mode?
Dark Wraith said:
Can you connect it in fastboot mode?
Click to expand...
Click to collapse
No i could not . When i connect my phone to my computer with red LED nothing pops up on flashtool, when the red LED disappeared i tried connecting it in flashmode holding down the vol down buttom as guided by another thread. got no response and same goes with fastboot mode, no luck either ):
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
tron1 said:
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
Click to expand...
Click to collapse
I tried not working
If i press&hold VOL+ while inserting the USB cable still my phone come with Qualcomm HS-USB Mode
thanks for your reply
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
tron1 said:
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
Click to expand...
Click to collapse
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
I don't know where to ask so I'm gonna try here. My G820N is stuck on Android 10 beta. Whenever I flash an official kdz, it only allows for emergency calls. Can't do anything. Any help would be appreciated
Following, in right here with ya.
atsuisofu said:
Following, in right here with ya.
Click to expand...
Click to collapse
Try entering download mode with phone disconnected from USB cable.
Also try to see if it gets recognized by LG-UP or by LG Bridge. These 2 softwares don't need download mode to be able to flash, just the phone to be recognized on some PORT.
Try also factory reset hard menu. Also try switching between Slot A and Slot B. There is also this backup method. Phone is not dead on one of those slots.
If nothing works (but slot a slot b should 100% work) , wait for the firehose, it's just around the corner. That will restore the phone back 100%.
For more info search v50thinq on telegram app. :good:
I can t get to download as it freezes and without the USB cable it doesn't even try and enter. I appreciate the recommendations. I was thinking of the a/b seit hbut without the use of fastboot I am at a loss of how to switch between the two as I thought the system chose and the switch happened upon rebooting once a system had been selected ie as in turning the unit off after loading the os set a flag to go to the opposite system upon completing the inftframs and boot sequence.
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
Hi, i'm facing the same problem today, my QM will not go into any mode other than the Qualcomm mode. Were you able to recover your phone finally ?
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
did you ever get it fixed. im having the same problem.
johnnycm77 said:
did you ever get it fixed. im having the same problem.
Click to expand...
Click to collapse
me too, do you fix it?
vikramanananda said:
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Click to expand...
Click to collapse
So, if the device, as you say, lost power during an update like that, then almost assuredly you have at least one, if not numerous corrupted partitions.
And, it's specific partitions on the device that allow it to enter download mode. One of these most know about or have heard of is the laf partition. But other have to be there also for it to work, I don't remember exactly what the others off the top of my head, but that info is easily found.
The key thing you need (or any others commenting same prob), is to be able to enter EDL mode and have qfil installed and recognizing the device. If you can get that far, it would be easy to find the correct partitions you could flash with qfil and then immediately go from qfil to download mode.
Many many people have done this. Just get qfil set up (see guides section) and get the device recognized. that takes some effort but it's def doable.
So I have spent hours now looking around for an answer the phone is find my phone locked and I can't remember my pin code. I have done all the tricks with the combination keys.
The usual way to get into Recovery mode is Hold V+ and power until the phone vibrates and you should be in recovery mode release the keys. (Doesn't work)
Iv read that you should have the USB cable connected from pc/laptop while you do the same holding V+ and power button... (doesn't work ether)
and download mode should be very easy just hold V+ and V- plug USB cable from pc/laptop and you should get into download mode by pressing V+. Will only show charging Icon and that's its.
So is it possible to turn off this modes from the manufactor? Or is this a completely new security future? How can you use odin? How can you wipe the cache? If you end up having some issues.
Im going nuts....
No way to get into fastboot ether. So if anyone know why this is happening to me or got any solution I would appreciate it.
Plug in your cable with the phone turned on. Hit Power Off and wait for the phone to fully turn off. The charging logo will show up so let the animation do its thing. After maybe 20 seconds, press Volume up + Power and keep them pressed until you boot to recovery. If the command wasn't recorded in the first place and the phone is still off after more than 15 seconds, let go of the buttons and press them again and keep them pressed until it boots in Recovery
dragos281993 said:
Plug in your cable with the phone turned on. Hit Power Off and wait for the phone to fully turn off. The charging logo will show up so let the animation do its thing. After maybe 20 seconds, press Volume up + Power and keep them pressed until you boot to recovery. If the command wasn't recorded in the first place and the phone is still off after more than 15 seconds, let go of the buttons and press them again and keep them pressed until it boots in Recovery
Click to expand...
Click to collapse
It will not work. How the hell should I be able to cle3ar cache if I got a boot loop ??? They can't just turn off recovery mode mand download mode??? This is so strange even paying for a frp reset but not even he does know what wrong??? Can they turn off fastboot, recovery mode and Download mode on this new phones? Is it because its locked with find my phone? 1 week researching now. It will only vibrate. And my PC cant find my phone anymore worked fine 30min ago nothing has changed... So annoying never seen this happened before every combination with buttons to get in any mode doesn't work only vibrates and go to pin lock screen...
Take it to a Samsung Experience center at best buy. Or send it into Samsung for repair.
download mode:
Turn off phone
plug cable in pc but not in phone
pres "volume +" and "volume -" in the same time
plug cable in phone
recovery mode:
plug cable in pc and s22
power off
press "volume +" and power
wait until see recovery mode
starciti said:
download mode:
Turn off phone
plug cable in pc but not in phone
pres "volume +" and "volume -" in the same time
plug cable in phone
recovery mode:
plug cable in pc and s22
power off
press "volume +" and power
wait until see recovery mode
Click to expand...
Click to collapse
thats a solid advice assuming his bootloader/recovery/download mode is fully functional then this advice works, in his case and in mine too it does not work and trying to get to the root of the problem is the key. In my case recovery mode gives error on screen so it may have to do with the way firmware is installed as these modes are not accessible.
have you sorted it out? Its nearly a year onwards =)
CrispShadow19 said:
thats a solid advice assuming his bootloader/recovery/download mode is fully functional then this advice works, in his case and in mine too it does not work and trying to get to the root of the problem is the key. In my case recovery mode gives error on screen so it may have to do with the way firmware is installed as these modes are not accessible.
Click to expand...
Click to collapse
This, at index 2:48 minutes.
It needs to be connected to the PC. Another screwy quirk Samsung added recently. Your button timing/sequence matters as well.
On my N10+'s you can go into recovery directly with a restart if you do it right. Otherwise they will puke on you.