How to - Camera2API and Google Camera installation - Xiaomi Redmi Note 5 Pro Questions & Answers

Please continue reading if you have bootloader unlocked. If not, you might want to unlock your bootloader before you can try these steps.
- Boot phone into fastboot (Volume down + Power)
- Install TWRP
- Boot into recovery (TWRP)
- Press on "Keep read only" on the first page that is presented in TWRP
- Connect phone to PC
- Type "adb devices" and ensure connectivity
- Type "adb shell"
- Type "setprop persist.camera.HAL3.enabled 1"
- Type "exit"
- Type "adb reboot"
Once your phone boots up, install BSG Google camera port
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_5.2.022_FINAL_1.0.apk
Open camera, and below are some settings I did to get better photos as compared to stock camera
Settings -> BSG mod settings
- Model New style Pixel
- HDR+ parameter - Super High
- Fix back camera (black level)
- Final jpg quality HDR+ 100%
- Zoom in portrait for back and front camera - 1.0 (without zoom)
Settings -> Developer settings
- enable camera.p3
- enable camera.enable_hwhdr
Please verify the photos taken from Google camera vs Stock camera for analysis
Detailed comparison
==================
The monkey
MIUI - https://ibb.co/gjgCfy
Gcam - https://ibb.co/kDDxDJ
The penguin
GCAM - https://ibb.co/irUnDJ
MIUI - https://ibb.co/hLwjtJ
Silent lady
GCAM - https://ibb.co/hUVKtJ
MIUI - https://ibb.co/mRhcfy
Garfield
GCAM - https://ibb.co/gmtB7d
MIUI - https://ibb.co/iDVf0y
The cat
GCAM - https://ibb.co/eUaDLy
MIUI - https://ibb.co/hQtTnd
The slide
GCAM - https://ibb.co/d6xtLy
MIUI - https://ibb.co/hkFkYJ
Silent lady 2
GCAM - https://ibb.co/i4Z17d
MIUI - https://ibb.co/ksuJnd
Giraffe
GCAM - https://ibb.co/hUYdnd
MIUI - https://ibb.co/hYYNDJ

Does front cam portrait working and on which Rom and device are you using? Is it China Or Indian Pro version?

The phone is not rooted. I am using this on Redmi note 5 pro, running 9.5.11.0
Both back and front camera portrait mode is working

All other camera ports can be found at the following link
https://www.celsoazevedo.com/files/android/google-camera/
You can read about developers contributing to different forks
https://www.celsoazevedo.com/files/android/google-camera/versions/

My pc doesn't find my device when I type adb devices command.

facerneidiz said:
My pc doesn't find my device when I type adb devices command.
Click to expand...
Click to collapse
Go to settings -> additional settings -> developer options -> Enable USB debugging.

mohan_168 said:
The phone is not rooted. I am using this on Redmi note 5 pro, running 9.5.11.0
Both back and front camera portrait mode is working
Click to expand...
Click to collapse
Great to know Gcam portrait working for you in both back and front side but I am using China verient and using Arnovas nodded app in which front portrait doesn't work and using latest RR Rom. Because of the camera sensors differences in China and Indian verient maybe different Gcam doesn't work fully in my China version. Hoping someone finds a way to make all the features work in China verient. Thanks

I do that but I don't receive usb debugging permission on my phone after connecting to pc.

facerneidiz said:
I do that but I don't receive usb debugging permission on my phone after connecting to pc.
Click to expand...
Click to collapse
Try to change usb port or change PC

facerneidiz said:
I do that but I don't receive usb debugging permission on my phone after connecting to pc.
Click to expand...
Click to collapse
Try using Minimal ADB and fastboot for connecting to mobile.

Done. The front camera doesn't work. The apk you had attached above didn't work. Downloaded another from the list. It workwd but the front camera doesn't work.

facerneidiz said:
Done. The front camera doesn't work. The apk you had attached above didn't work. Downloaded another from the list. It workwd but the front camera doesn't work.
Click to expand...
Click to collapse
How do you find the image quality as compared to stock?
For front camera
BSG Settings:
-Old Style -> Nexus (so front can works with and without portrait mode)
-Portrait Mode Always Active (So portrait mode appears instead of tilt shift)

Please post a screenshot for BSG settings. I don't think I have this option.
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
The images from gcam have better color and details.

Anyone else got front cam portrait working stable on rn5 ai/china? I kinda got it working (intermittently) by toggling front and back camera a number of times and taking photos while in portrait mode

facerneidiz said:
Please post a screenshot for BSG settings. I don't think I have this option.
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
The images from gcam have better color and details.
Click to expand...
Click to collapse
Can you download this from the below link?
https://www.celsoazevedo.com/files/android/google-camera/
In this page, search for MGC_5.2.022.apk

I downloaded it but it is black when camera app is opened. Any fix?
---------- Post added at 01:36 PM ---------- Previous post was at 01:22 PM ----------
I am running stock 9.2.4

Edge detection issue on Redmi note 5 pro
mohan_168 said:
Please continue reading if you have bootloader unlocked. If not, you might want to unlock your bootloader before you can try these steps.
- Boot phone into fastboot (Volume down + Power)
- Install TWRP
- Boot into recovery (TWRP)
- Press on "Keep read only" on the first page that is presented in TWRP
- Connect phone to PC
- Type "adb devices" and ensure connectivity
- Type "adb shell"
- Type "setprop persist.camera.HAL3.enabled 1"
- Type "exit"
- Type "adb reboot"
Once your phone boots up, install BSG Google camera port
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_5.2.022_FINAL_1.0.apk
Open camera, and below are some settings I did to get better photos as compared to stock camera
Settings -> BSG mod settings
- Model New style Pixel
- HDR+ parameter - Super High
- Fix back camera (black level)
- Final jpg quality HDR+ 100%
- Zoom in portrait for back and front camera - 1.0 (without zoom)
Settings -> Developer settings
- enable camera.p3
- enable camera.enable_hwhdr
Please verify the photos taken from Google camera vs Stock camera for analysis
Click to expand...
Click to collapse
Bro when I am using gcam on Redmi note 5 pro
Edge detection not working properly like stock camera....every photo get this problem can you tell me the reason...

Thanks @mohan_168! Can you post full size low light photos comparing between stock and Gcam mod?

tnthd2 said:
Thanks @mohan_168! Can you post full size low light photos comparing between stock and Gcam mod?
Click to expand...
Click to collapse
It is day right now, I will post one 12 hours from now

sushils699 said:
Bro when I am using gcam on Redmi note 5 pro
Edge detection not working properly like stock camera....every photo get this problem can you tell me the reason...
Click to expand...
Click to collapse
Can you post some samples for comparison

Related

OppoCamera APK from Chinese Beta ROM

Here is the original camera apk from Chinese ColorOS 2 Beta.
Current version: 1.04.986
From Chinese ColorOS 2.0.16 (Find7a - X9007)
Tested on ColorOS 1.2.2i (Find7a - X9006)
DOWNLOAD: http://www12.zippyshare.com/v/73078312/file.html
Original source: http://bbs.coloros.com/find7-57994-1-1.html
What are the features you don't have in the original camera app? (ColorOS 1.2.Xi)
+ adjustable ISO (auto, 100, 200, 400, 800, 1600)
+ ScanPaste (= QR code scanner)
+ Poster Search (I could not make this one work, maybe it takes only specific chinese posters/magazines)
+ Voice Shot (take the photo with just saying 'Cheese'...) - not working, it probably needs another app to work properly.
+ Voice Beauty (adjustable skin beautifier - only for Chinese speakers) - not tested, but it is very likely that it will have the same problem as the Voice Shot
Installation:
- copy the apk file to your phone/sd storage and install it.
How to get back to the original camera app?
- just uninstall it.
(it is installed as an update, so when you uninstall it, you will get back to the original version of the app)
Will the app work on a custom ROM?
- if the ROM is not based on ColorOS it probably won't work.
Very nice, but voice snapshot doesn't work for me!I don't know, but logcat says 'ALSA input device not found!'.
Any help is appreciated!
Tia
Is this for 7A or 7S?
I tested it on 7S, but it shouldn't be the difference with actual colorOS, cause it's same for both!
Zoltan-X said:
Very nice, but voice snapshot doesn't work for me!I don't know, but logcat says 'ALSA input device not found!'.
Any help is appreciated!
Tia
Click to expand...
Click to collapse
I guess the app looks for another apk which is not implemented in the international ColorOS.
ALSA is an audio driver, so it makes sense it doesn't work without it...
APK analysis might help to find the right apk for this to work..
Somebody who tests the camera apk on a ColorOS 2.0.0i Beta would be appreciated..
Mord0rr said:
Is this for 7A or 7S?
Click to expand...
Click to collapse
I have extracted it from the official version for X9007 (Find 7a). You can try it on Find 7 and unninstall it if the app misbehaves.
(But as Zoltan-X stated above, it should work with no problem)
Works as you say on 7a (X9006) with ColorOS 1.2.2i but some of the wording in the settings menu is cut off with the large font options. Probably ok on the smaller font settings but I'm of an age where the smaller fonts are just wingdings
kazam401 said:
Works as you say on 7a (X9006) with ColorOS 1.2.2i but some of the wording in the settings menu is cut off with the large font options. Probably ok on the smaller font settings but I'm of an age where the smaller fonts are just wingdings
Click to expand...
Click to collapse
Thanks, installed and tested slow shutter, manual iso at completely dark bedroom, the only light is from my Macbook Pro's keyboard.
ISO 1600, F/2.0, 1s
Oppo Find 7, ISO 1600, 1s, f/2.0 by +OnePiece+, on Flickr
For some reason the app reverts itself to stock (non-chinese) version after every reboot. Wtf?
Essatti qaamaarta

Le_zl1_lex720-cn-fn-waxcnfn6003009091s-6.0.03 (30s): Cleaned, phone manager, pokemon

hello
i cleaned the LE_ZL1_LEX720-CN-FN-WAXCNFN6003009091S-6.0.03 (30S) from all SPAM china apps excluding: PHONE MANAGER, SYSTEM UPDATE (OTA), FEEDBACK.
MY STRATEGY: keep all apps that work with the phone HARDWARE (camera, dialer, etc). keep only the nice apps and delete as much SPAM apps as possible.
INSTALLED APPS (SYSTEM):
GAPPS minimal build for Pokemon GO (Google Play Services Version 12.6.85)
Recommended APPS:
Google Play Store 6.0.7:
INFO FOR FAKE GPS USER:
Install MAGISK (for ROOT):
Install FAKE GPS APP (take the app you like most)
Install /system/app mover ★ ROOT ★ 1.7.3:
move FAKE GPS with /system/app mover ★ ROOT ★ 1.7.3 to SYSTEM.
I think the Phone runs very fast + stable (with the cleaned rom).
POKEMON GO runs superfast without any issues.
its my first project here and i can provide TWRP BACKUP.
Question. On this version with android 6.0, Can you test if Gcam Mod (Version 3.5) can do Shot with bokeh effect?
I read that version (Mod) can do shot with Blur effect (like Gcam Mod on Android 7+)
BTW, Some screenshots will be great!!n
kukuteku said:
Question. On this version with android 6.0, Can you test if Gcam Mod (Version 3.5) can do Shot with bokeh effect?
I read that version (Mod) can do shot with Blur effect (like Gcam Mod on Android 7+)
BTW, Some screenshots will be great!!n
Click to expand...
Click to collapse
do you have the link of the apk for "Gcam Mod (Version 3.5)"?
i have some screenshots but i cant upload them.
Katastrophus said:
do you have the link of the apk for "Gcam Mod (Version 3.5)"?
i have some screenshots but i cant upload them.
Click to expand...
Click to collapse
This --> Gcam
I'd want to know if Bokeh effect works on android Marshmellow 6.0 (I know its does work on android Nougat and above)
I have a Lepro3 X727, using Android 8.1 (DotOS) and works fine but Battery and Sound on Stock EUI android 6 are Supreme and I missed a lot. If Gcam Mod work and can do Shot with Bokeh effect or Portrait mode (Not lens Blur, it not same) I could to back android Stock.
+You must to have enable Camera2 API. Remember thats
kukuteku said:
This --> GCamMod_v.3.5.0.apk
I'd want to know if Bokeh effect works on android Marshmellow 6.0 (I know its does work on android Nougat and above)
I have a Lepro3 X727, using Android 8.1 (DotOS) and works fine but Battery and Sound on Stock EUI android 6 are Supreme and I missed a lot. If Gcam Mod work and can do Shot with Bokeh effect or Portrait mode (Not lens Blur, it not same) I could to back android Stock.
+You must to have enable Camera2 API. Remember thats
Click to expand...
Click to collapse
i hacked the build.prop: manually added persist.camera.HAL3.enabled=1 .
the GCamMod_v.3.5.0 app don't open and crashes when starting it.
with the "Open Camera" app V1.45.2 you can shot fotos with Camera2-API (RAW-MODE).
https://photos.app.goo.gl/r69biXGk2r6yA1GJ8
Katastrophus said:
i hacked the build.prop: manually added persist.camera.HAL3.enabled=1 .
the GCamMod_v.3.5.0 app don't open and crashes when starting it.
with the "Open Camera" app V1.45.2 you can shot fotos with Camera2-API (RAW-MODE).
https://photos.app.goo.gl/r69biXGk2r6yA1GJ8
Click to expand...
Click to collapse
Thank you very much.
if you are interested i could post my TWRP backup (boot, data, system) 3.67GB on google drive or somewhere else.
build.prop: manually added persist.camera.HAL3.enabled=1 included in TWRP backup.
i think this build is (much) faster as many phone with stock rom.
this build is super responsive on games like pokemon go and on any other app i tired out so far.
i added antutu benchmark for my build on my photos.
https://photos.app.goo.gl/r69biXGk2r6yA1GJ8
Katastrophus said:
if you are interested i could post my TWRP backup (boot, data, system) 3.67GB ni on google drive or somewhere else.
build.prop: manually added persist.camera.HAL3.enabled=1 included in TWRP backup.
i think this build is (much) faster as many phone with stock rom.
this build is super responsive on games like pokemon go and on any other app i tired out so far.
i added antutu benchmark for my build on my photos.
https://photos.app.goo.gl/r69biXGk2r6yA1GJ8
Click to expand...
Click to collapse
I will stay on Android 8+ custom roms. I miss a lot Stock Battery and Audio, but I need the Gcam Mod, its a "Must" for me.
Thank you very much.

[Google Camera] Arnova8G2 and Urnyx05 builds [.apk + .xml] - GCam 7

Arnova8G2 - version 7.3 [recommended for beginners]
07/04/2020 build: [Original .apk] [No cloned .apk yet]
Recommended XML:
XDeadshoTX People: [Download link]
XDeadshoTX Detail: [Download link]
SAP-Overkill: [Download link]
Nameless: [Download link]
Pixel4 v5: [Download link]​
Features:
All Modes working except Motion Photos
Custom Settings such as Sharpness, Denoise, etc
24/30/60 FPS selection in Video (1080p)
XML Support for different scenarios
Aux Cameras ONLY with Magisk Module (see below)
Electronic Image Stabilization is working on Videos
Slow Motion is working on GCam
Astrophotography (swipe up on Viewfinder and Enable)
RAW is available taking pictures/exporting
16:9 Image Format doesn't work
48MP RAW is not possible for now
HDR+ Enhanced when taking pictures facing the Sun
​
Urnyx05 - version 7.2
18/02/2020 build: [Original .apk] [Cloned .apk]
Recommended XML:
Nameless Final: [Download link]​​
Urnyx05 - version 7.3
01/04/2020 build: [Original .apk] [Cloned .apk]
Recommended XML:
Pixel4 v3: [Download link]
Pixel4 v4: [Download link]
Pixel4 v5: [Download link]​
Features:
All Modes working except Slowmotion
Custom Settings such as Sharpness, Denoise, etc
Aux Cameras ONLY with Magisk Module (see below)
Astrophotography (swipe up on Viewfinder and Enable)
24/30/60 FPS selection in Video (1080p)
XML Support for different scenarios
Electronic Image Stabilization is working
RAW is available taking pictures/exporting
48MP is not possible for now
HDR+ Enhanced when taking pictures facing the Sun
Slow Motion doesn't work in this GCam
​
How to use .xml files
.xml files must be stored in [Internal Storage]/GCam/Configs7 (create the folder if it doesn't exists)
To load an .xml double tap the area between the capture button and gallery, select the .xml and click Restore or Update (depending on GCam used)
If there are no .xml files, make sure the folder is created and the name is correct.
How to enable auxiliary cameras [magisk required] [updated for 7.3 Arnova]
Download the following magisk module and install it: [Download link]
Reboot your phone. If the app still crashes when you select an auxiliary camera do another reboot.
Auxiliary cameras are supported only by Urnyx05 GCam at this time.
Auxiliary cameras are not supported in cloned .apks.
Cloned .apks
Cloned .apks are needed in order to use two different versions of the same app
You can also use cloned .apks to have the same app version with different settings (.xmls). One for day and one for night.
Auxiliary cameras are not supported in cloned .apks.
Credits to Arnova8G2, Urnyx05, Nameless, Sir TAVARES and everyone else on the telegram channel.
These are the best ones at the moment. Still recommend Urnyx with Nameless or Pixel4 xml. Arnova 7.3 is still a beta and lots of bugs with missing options (aux cam, astro toggle etc)
Just installed the Urnyx05 with Nameless.xml, and it seems to be working pretty well. Some features don't work, but that's to be expected haha.
Do I need to be root to install magisk?
nendor said:
Do I need to be root to install magisk?
Click to expand...
Click to collapse
Magisk is what you need to use in order to gain root
---------- Post added at 09:14 PM ---------- Previous post was at 09:07 PM ----------
nendor said:
Do I need to be root to install magisk?
Click to expand...
Click to collapse
Magisk is what you need to use in order to gain root
Thank you.
Thanks a lot for sharing! Will be testing.
Neither Arnova8G2 7.3 nor Urnyx05 7.2 is working for me.
I get a crash with Arnova8G2 7.3 as soon as I open up the camera app.
With Urnyx05 7.2, I get a crash after I press the shutter button for both XML files.
Thanks for share .
Is it possible to run multiple gcams of same version side by side ?
hightech316 said:
Thanks for share .
Is it possible to run multiple gcams of same version side by side ?
Click to expand...
Click to collapse
I updated the main post and included links to a cloned version that you can use to have the same gcam side by side.
sstrunks84 said:
Neither Arnova8G2 7.3 nor Urnyx05 7.2 is working for me.
I get a crash with Arnova8G2 7.3 as soon as I open up the camera app.
With Urnyx05 7.2, I get a crash after I press the shutter button for both XML files.
Click to expand...
Click to collapse
What's your device and software version? Any Magisk modules installed?
Using OP7T, Urnyx and the nameless v7 XML, only feature I've found not working is the slow Mo, everything else seems fantastic, and much better than stock
Can you provide Arnova latest clone apk?
soumya1393 said:
Can you provide Arnova latest clone apk?
Click to expand...
Click to collapse
https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
Is this what you meant?
can someone educate on auxiliary cameras? if enabled, do they improve quality? are they enabled by default in the stock cam app? Thanks!
pk92 said:
Using OP7T, Urnyx and the nameless v7 XML, only feature I've found not working is the slow Mo, everything else seems fantastic, and much better than stock
Click to expand...
Click to collapse
can you link nameless v7 XML please?
Ludespeed said:
can you link nameless v7 XML please?
Click to expand...
Click to collapse
It's from the OP.
only feature I'm missing is macro mode.. is there any way to do this in gcam
Does anyone else have the same zoom crash problem I'm having when locked focused on an object? This is only for the Urnyx05 version, not the Arnova8G2 version. I detail the problem in the post linked below:
Problem: GCam crashes when the focused point/circle moves outside of the screen during the process of zooming.
If you can't repeat the problem on your phone, can you please look at my signature and tell me how your phone is different? Thank you.
c19932 said:
can someone educate on auxiliary cameras? if enabled, do they improve quality? are they enabled by default in the stock cam app? Thanks!
Click to expand...
Click to collapse
If you install the magisk module it will allow you to use ultrawide and telephoto cameras in google camera. Read the first post for more info.
NoSauce said:
Does anyone else have the same zoom crash problem I'm having when locked focused on an object? This is only for the Urnyx05 version, not the Arnova8G2 version. I detail the problem in the post linked below:
Problem: GCam crashes when the focused point/circle moves outside of the screen during the process of zooming.
If you can't repeat the problem on your phone, can you please look at my signature and tell me how your phone is different? Thank you.
Click to expand...
Click to collapse
Did you try it on stock rom as well? OmniRom might cause it to crash.

Request: Gcam for realme 6i (a stable, non-laggy, and supported port)

I've been struggling to find a compatible version of GCAM or Google Camera for my mobile device which is Realme 6i. Some versions of it usually contains crashes and laggyness through out the application due to its incompatibility. Can anyone do an unofficial but stable and compatible port for Realme 6i? I'm willing to wait as long as it'll happen. Thank you! :good:
I use this one but nighacape mode dont work
https: // drive. google .com/file/d/ 19TZYFSQVs3xIVy8EEJX9MOogGnkxXb2H/view
Remove spaces in link search in browser
I need a good gcam for 6i.. someone plz
Check realme 6 gcam
To avoid Viewfinder Lag, install Gcam 6.2 or 6.1.
Gcam 6.3 & onwards lag on Mediatek devices without lagfix, which usually requires root.
If you can compromise on Viewfinder Lag, try this Gcam 7.4: (copy/paste in new tab)
https://f.celsoazevedo.com/file/cfiles/gcm1/NGCam_7.4.104-v1.3_gcam.apk
Config: (Long press & Download Link)
It's for Realme 3, but it might work fine on this phone as well.
If you encounter any issues, try disabling Pixel Binning & Reduce Dots from Settings - Advance - Enable Sabre / Experimental.
Steps:
1. Open Google Camera.
2. Menu - Settings - Configs - Save - Save.
3. Open File Manager.
4. Phone Storage - Download - [email protected] (Copy it).
5. Phone Storage - GCam - Configs7 (Paste here).
6. Open Google Camera.
7. Double tap on empty black space at the bottom (Around selfie/capture/photos buttons).
8. Choose config - [email protected]
9. Restore.

Can you share your camera mod on any custom roms on [JOYEUSE]

provide any links if possible. ty
Try this:
https://play.google.com/store/apps/details?id=com.granturismo.gcamator&hl=es
ANXCamera v185 with ANX48MPFix Q v170. You also need the ANXCamera Pro app from Play Store
Everything worked on the GSI rom from sooti. On the official Pixel Experience for curtana (which works on joyeuse now) the protrait mode doesn't work...
How to install: (use the versions I stated above, other versions cause bootloop or just don't work)
For those who want stock camera with 64mp support on back and 16 on front
1. Download ANX camera from here along with the 48mp addon
2. flash in magisk both modules
3. Reboot
4. Give ANX camera all the permissions in app info
5. First time might crash then re-open
6. To fix portrait in front camera, download anx camera config from play store and search for portrait, enable all settings except for 'portrait night front'
7. restart app
Click to expand...
Click to collapse
For the GCam, I really couldn't find a stable port, they were all pretty useless IMO. Stability issues and missing basic features are a no no for me.
Seems JOYEUSE is slightly different than CURTANA
ANX Camera 190 working so far except rear portrait:
1. ANXCameraUnity_190.BountifulDistantHapuka.zip
2. ANXFrameworkUnity_190.BountifulDistantHapuka.zip
3. 48MPFixQ_181.GlossyIntelligentCock.zip
4. ANXCameraHotfix.190.BootloopFix.zip
5. JoyeuseCameraFix_V1.0.zip
and AnxCamera Pro app enabled everything with portrait except night portrait did the trick.
phil2sat said:
Seems JOYEUSE is slightly different than CURTANA
ANX Camera 190 working so far except rear portrait:
1. ANXCameraUnity_190.BountifulDistantHapuka.zip
2. ANXFrameworkUnity_190.BountifulDistantHapuka.zip
3. 48MPFixQ_181.GlossyIntelligentCock.zip
4. ANXCameraHotfix.190.BootloopFix.zip
5. JoyeuseCameraFix_V1.0.zip
and AnxCamera Pro app enabled everything with portrait except night portrait did the trick.
Click to expand...
Click to collapse
This works for me, but the the app crashes every time I open front camera. Do you have any guesses why?
Read steps after 5.
Download Anx Camera Pro from Playstore, open, search for portrait, enable all portrait options except night portrait, hit save, enjoy front camera
phil2sat said:
Read steps after 5.
Download Anx Camera Pro from Playstore, open, search for portrait, enable all portrait options except night portrait, hit save, enjoy front camera
Click to expand...
Click to collapse
Actually, I also have to disable hand gesture in order to get the front camera working. Thanks anyway.

Categories

Resources