Related
I tried upgrading to 7.1, and have tried 3 different ROM's. I even tried going back to 6. Every single ROM told me error code 7 when I tried to flash it. I went about fixing that. So then I was able to flash the ROM and GApps. But then when it goes to boot into the OS all it does is hang on the white Asus screen, reboot, and go back to the white Asus screen. It does that 3 times then goes into recovery. I even tried fixing it with ZE551ML_Modder V3.3. I am running TWRP-3.0.2-0-Z00A.img. This is a Z00A as well. Any help would be greatly appreciated. Thank you.
jaed.43725 said:
I tried upgrading to 7.1, and have tried 3 different ROM's. I even tried going back to 6. Every single ROM told me error code 7 when I tried to flash it. I went about fixing that. So then I was able to flash the ROM and GApps. But then when it goes to boot into the OS all it does is hang on the white Asus screen, reboot, and go back to the white Asus screen. It does that 3 times then goes into recovery. I even tried fixing it with ZE551ML_Modder V3.3. I am running TWRP-3.0.2-0-Z00A.img. This is a Z00A as well. Any help would be greatly appreciated. Thank you.
Click to expand...
Click to collapse
Did you upgraded the bootloader? I would just retrace steps, if not factory reset and try again.
lordpipa said:
Did you upgraded the bootloader? I would just retrace steps, if not factory reset and try again.
Click to expand...
Click to collapse
The bootloader is the recovery right? (At least thats what I always thought). If so then I am running the newest TWRP for it.
http://theflamingskull.com/zenfone2.html
Upgrade your bootloader following the instructions on the .zip package.
This will upgrade your bootloader and flash a compatible TWRP recovery.
lordpipa said:
http://theflamingskull.com/zenfone2.html
Upgrade your bootloader following the instructions on the .zip package.
This will upgrade your bootloader and flash a compatible TWRP recovery.
Click to expand...
Click to collapse
I did all that. Now I am stuck with CM Recovery. I tried using the tool to get TWRP back but its not working. I have to figure out how to push TWRP using ADB.
In modder, return to stock option , flash stock recovery and boot img.
Unlock bootloader in modder, just incase.
Flash twrp, root in modder ..reboot to twrp...install 7.1 and pico gapps
I finally had to go to Ubuntu, run ADB as SU and ADB Sideload an older version of Cyanogenmod. Not a single factory image would work. And not a single one of those Android 7 ROM's would work. They are all broken. I would like to see real proof of one working. That little escapade cost me a lot of time. So until someone comes out with a real CM14 version for the Z00A do not attempt to boot one.
jaed.43725 said:
I finally had to go to Ubuntu, run ADB as SU and ADB Sideload an older version of Cyanogenmod. Not a single factory image would work. And not a single one of those Android 7 ROM's would work. They are all broken. I would like to see real proof of one working. That little escapade cost me a lot of time. So until someone comes out with a real CM14 version for the Z00A do not attempt to boot one.
Click to expand...
Click to collapse
You may have really misunderstood the processes and yes they are allover the place.
i am running CM14.1 lots of people are !
What you probobaly have is LP based CM 13 on WW-4.20 blah blah.165
Then there was a CM13 with MM blobs based on WW-4.21 blah blah .135 MM
I think where you have gone wrong is not unlocking bootloader in 5 LP and upgrading bootloader and unlocking.
if you are on .165 - you could flash stock recovery for .165 -- upgrade to .184 -- unlock bootloader and upgrade to MM then unlock bootloader in MM with modder
Then use the modder to install 7.1 14.1 CM
But judging by the probs you have haD already - just leave it alone :good:
What is WW?
jaed.43725 said:
What is WW?
Click to expand...
Click to collapse
WW is world wide
CN china
JP japan
relating to stock FW from official site .
You know what you are doing re using ubuntu to adb but have the procedure all messed up.
Would you like to get to MM and 7.1 CM14.1 and have a windows PC ? ?
Post a screen shot of build number info you are presently on :good:
hello, good (whatever time it is XD) I recently rooted and unlocked my bootloader of my note 4, then flashed 3.0.2.0 twrp and a system5.1.1.tar file on it so It wouldn't boot loop. however, when I try to flash your translated normav20 twrp just instantly reboots, I tried a higher version of twrp and I won't work so help me pls. n910v btw
jarsdel said:
hello, good (whatever time it is XD) I recently rooted and unlocked my bootloader of my note 4, then flashed 3.0.2.0 twrp and a system5.1.1.tar file on it so It wouldn't boot loop. however, when I try to flash your translated normav20 twrp just instantly reboots, I tried a higher version of twrp and I won't work so help me pls. n910v btw
Click to expand...
Click to collapse
You might be able to get some help from the thread that you downloaded the ROM from that you're trying to flash. Since you're still on lollipop make sure that's not a marshmallow ROM you're trying to flash. Good luck to you. Once you get it all figured out you're going to love it!
dhplap said:
You might be able to get some help from the thread that you downloaded the ROM from that you're trying to flash. Since you're still on lollipop make sure that's not a marshmallow ROM you're trying to flash. Good luck to you. Once you get it all figured out you're going to love it!
Click to expand...
Click to collapse
Thnx im fine know i did some research and was able to fix and flash what i needed to, i appreciate the response:good:
jarsdel said:
Thnx im fine know i did some research and was able to fix and flash what i needed to, i appreciate the response:good:
Click to expand...
Click to collapse
follow this
https://forum.xda-developers.com/showpost.php?p=74521633&postcount=1587
Hey guys since i dint see any stock roms here, i decided to make one thats possible to flash from twrp, its 100% stock nothing added nothing taken from original rom, no firmaware files in rom zip.
I have the the US Asus Zenfone 4 pro , tested ONLY ON THIS DEVICE DO NOT FLASH IT ON ANY OTHER ZENFONE YOU HAVE BEEN WARN!!
How to Flash:
1.Unlock Bootloader Via Official App
2.Flash TWRP
3:Swipe to allow modifications to system VERY IMPORTANT! flash noverity.zip just incase you get stuck in a bootlooop.
4lace zip on your sdcard/internal Storage
5:Wipe Data/System
6:Flash rom zip (Ignore "unknow command error" after flashing, i need to cleanup the update script )
7.Reboot to system
I followed these step and rom flashed fine.
I might try and do some other things with this phone, be advised i haven't tinker with android in a very very long time.
ROM Download LINKS:
OREO-WW-15.0410.1803.51.zip
Change log:
1.Security patch update
2.Improve touch sensitivity
3.Fix launcher home page folder cannot be changed
4.Fix play to/MI Box porject not full screen issue
5.Fix randomly auto reboot issue
6.Fix status bar icon to show more obviously
7.Fix audio issue in 3rd party APPs
OREO-WW-15.0410.1802.34 If you flash this you will need to flash 15.0410.1803.51 right after or you wont have audio and videos will lag.
WW-14.2610.1801.51_ROM
Change Log: January Security Updates
WW-14.2610.1712.45_ROM
Thanks Dude! Now I cant root it safe, without worrying about not having a recovery
No problem!, This will also allow people that unlocked bootloader before getting the latest ota, to be on the latest software update, il keep making these as asus releases future updates for our phones.
Added Latest WW-14.2610.1801.51 update enjoy guys.
rafyvitto said:
Added Latest WW-14.2610.1801.51 update enjoy guys.
Click to expand...
Click to collapse
Thanks dude...and sorry to ask...but can you do one with the oreo update? Thank
As soon as someone posts the oreo ota zip i will, haven't gotten the update on my phone yet ;/.
ok guys i have a working flashable OREO! but videos are lagging because i havent been able to flash the firmware files need to dig deeper into this, before releasing it, give me some time guys, also twrp is unable to decrypt OREO internal data so thats another issue, but this one si out of my league shakalaca will need to update our recovery to decryot oreo data, il upload the current rom if anyone is willinf to flash it with the current issues, let me know.
Here's a screenshot of about screen.
Proof of root on oreo
Hi.Can I update my firmware if bootloader is unlocked and root is installed?If so, how?
You want to upgrade to oreo? Or just update your current firmware?
Just wondering.Are phones updated when the bootloader is unlocked?
Yes you can update phones with unlock bootloader's, if you want official updates you need the stock recovery, the twrp flashable roms i made will give you stock recovery.
Where is the stock recovery to take?
Flash any of the twrp stock roms i made and it will give you stock recovery.
Download firmware from the official website of asus, install it via twrp
and I get stock recovery with the new firmware???You don't know when to do an unofficial unlock of the bootloader?
rafyvitto said:
ok guys i have a working flashable OREO! but videos are lagging because i havent been able to flash the firmware files need to dig deeper into this, before releasing it, give me some time guys, also twrp is unable to decrypt OREO internal data so thats another issue, but this one si out of my league shakalaca will need to update our recovery to decryot oreo data, il upload the current rom if anyone is willinf to flash it with the current issues, let me know.
Click to expand...
Click to collapse
Hi. I flashed the stock rom you uploaded because I accidentally lost mine... aside from audio/video lag issues, audio from calls were also unable to hear. Will patiently wait for your stock rom with firmware files. thaaaaanks
Go into recovery and flash the official oreo zip this will flash firmware files and fix no audio/video lag issues.
rafyvitto said:
Go into recovery and flash the official oreo zip this will flash firmware files and fix no audio/video lag issues.
Click to expand...
Click to collapse
:'(
Groundz said:
:'(
Click to expand...
Click to collapse
If you flash my oreo zip with no firmware and boot it up, this will give you stock recovery, which you will need to flash the stock oreo zip , and ofcourse you will need to reflash twrp after.
My phone has unlocked bootloader, TWRP, and is rooted with magisk. Got the OTA for (global) 9.5.4.0 last night - it downloads/de-crypts ok, reboots into TWRP, and then fails to flash. I also tried to flash manually via TWRP by locating the downloaded file, still fails. During the night, it rebooted itself (to try again I suppose), and my alarm didn't go off.
So here I am, late in work, wasting more "work time" to ask you for a possible solution :angel:
Go back to original miui recovery then you can update your miui successfully. After update,reflash twrp and magisk.
jimandy60 said:
Go back to original miui recovery then you can update your miui successfully. After update,reflash twrp and magisk.
Click to expand...
Click to collapse
Sounds easy, but I don't know how to do that. Could you point me in the right direction?
you can't flash an OTA with TWRP
Flash recovery img with fastboot
Code:
fastboot flash recovery recovery.img
then boot your phone
settings->about phone->system update->update
it will get in origin miui recovery and update system automatically
after update finished,reflash twrp and magisk
Thank you very much @jimandy60
With all the respect though, I would prefer downloading the file from a popular location. Is there any way to find this hosted somewhere else, maybe by Xiaomi?
ang3l said:
Thank you very much @jimandy60
With all the respect though, I would prefer downloading the file from a popular location. Is there any way to find this hosted somewhere else, maybe by Xiaomi?
Click to expand...
Click to collapse
maybe try this site?
en.miui.com
Hello!
I got the same problem but instead to come here and ask for help I tried to solve myself. I downloaded the lastest TWRP version and the device was not going into recovering mode. Then I installed again the previous one without results. I downloaded the TWRP app from Play Store and trying to solve I made wipe data, cache and I am not sure but I think also choose wipe system. Now my phone is stuck on the fastboot screen. Does not start. Using ADB I installed back the stck recovery but the problem remains. Somebody can help me please?
reflash the full rom?
download&unzip full rom package,get in fastboot mode and run flash_all.bat
Check out my guide here:
https://forum.xda-developers.com/mi-mix-2/how-to/guide-mi-mix-2-unroot-restore-recovery-t3770690
It has all the steps and files you will need to go from rooted stock MIUI Nougat to rooted stock MIUI Oreo applying the OTA update
colorado_al said:
Check out my guide here:
https://forum.xda-developers.com/mi-mix-2/how-to/guide-mi-mix-2-unroot-restore-recovery-t3770690
It has all the steps and files you will need to go from rooted stock MIUI Nougat to rooted stock MIUI Oreo applying the OTA update
Click to expand...
Click to collapse
Thanks, I'll take a look.
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.
cannon3025 said:
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.
Click to expand...
Click to collapse
I installed both just to see if I cam go back to CN rom once I'm on either Rom
Basically just downloaded the Global ROM file from the Nubia website, put it on my phones root folder, then did a local update, using the system update local update setting
auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I believe the recovery is part of the boot image now. I've dumped the payload too and I'll have a quick look and see if it's present. I have all the files for the US, global version. It's 4.1.2 I believe. I'll be happy to help any way I can. I just had a bad experience today... I've had my 6 Pro a week and already the cord has quit working. Not a good sign. I'm starting to regret my purchase.
auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways
bob24260 said:
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways
Click to expand...
Click to collapse
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?
auerick said:
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?
Click to expand...
Click to collapse
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.
bob24260 said:
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.
Click to expand...
Click to collapse
cool didn't know I could do that, thanks for the tip
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader
kittyshik said:
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader
Click to expand...
Click to collapse
fastboot flashing lock
though this will prompt another factory reset
auerick said:
fastboot flashing lock
though this will prompt another factory reset
Click to expand...
Click to collapse
thanks man appreciated!
where did you get the CN rom? can you share here?
here bro https://ui.nubia.cn/rom/detail/68
kittyshik said:
here bro https://ui.nubia.cn/rom/detail/68
Click to expand...
Click to collapse
thanks
Hello what are the steps and commands to go back to the CN rom? I cannot get it from all your comments here :'(
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
hmm i tried this method, it seems like my phone just went back to global rom even after cn boot image flashed
China rom is faster than global