Successful installation, however OS failed to boot.
OS is installed in an empty partition. After successfully installing, I restarted through 'advanced startup', then 'use a device', pressed Android-OS.
Through GRUB, I tried x86-android but that failed after 'Android_#'; laptop's stuck in a frozen terminal. Also tried x86-android nomodset, but that caused the screen to glitch blue.
The nightly kernels installed were the 7th July and 9th July updates.
Please post this in the Bliss OS thread, that is where we keep our support for that project
---------- Post added at 10:12 PM ---------- Previous post was at 10:01 PM ----------
Please post this in the Bliss OS thread, that is where we keep our support for that project
Oh alright, I'll ask again in Q&A then?
Related
does any one know how to or if you can activare wificalling on EE in UK, other handsets like Oneplus 5 and HTC U11 natively support this but not MIUI
Same
I have been asking the same.. There are a few good mi 6 ROMs on the forum but I haven't found a WiFi calling one. Its encoded into your build. I don't know but maybe one of the devs on here would be kind enough to tell me how to repack a ROM the files are on loads of other aosp and lineage os devices. I'm sure a simple zip flash should do it if correct files available.
---------- Post added at 07:59 AM ---------- Previous post was at 07:54 AM ----------
Here is a link to the aosp open source WiFi calling source code link.
https://www.google.co.uk/amp/s/www.xda-developers.com/google-open-source-code-for-wi-fi-calling/amp/
Ta
Stu
PS. There's an android.mk file there which seems to be a make file but traditional Linux commands won't work. Does anyone know how to do a post install of WiFi calling. A little bit of kindness goes a long way.
Someone answer pls as I'm going bald as it is lol
I would also like to see this... So I can use wi-fi calling on EE
Wifi calling
There is an unofficial build of resurrection remix for sagit available here by sagit. I just downloaded it. Will get link here to post and reply
---------- Post added at 09:19 AM ---------- Previous post was at 09:17 AM ----------
https://forum.xda-developers.com/mi-6/development/rom-resurrectionremix-5-8-3-t3654879
---------- Post added at 09:23 AM ---------- Previous post was at 09:19 AM ----------
https://www.androidfilehost.com/?fid=817550096634800109
That's the latest build he has released and don't forget to format your internal storage. It is encrypted and will put you in a boot loop. Follow his instructions and it will work a treat. The link above has full gapps.. Flash the small miui firmware kernel first to let it work. Any questions or stuck inbox me so the developer isn't inundated with questions.
Delete: misread question
Theory says - CAF based ROM should be the ultimate in performance & battery and this is currently the only CAF based rom available that gets regular updates and being actively worked on.
1. ROM Sources: https://github.com/Citrus-CAF
2. Kernel: https://github.com/Krieg-Kernel
(Slider is not working)
Download here: https://androidfilehost.com/?fid=11410963190603872951 (tested on my own DECRYPTED OP5 with OB21)
1. Wipe cache/system/data
2. Flash ROM zip
3. Boot to ROM
4 (OPTIONAL) reboot to TWRP, flash gapps+Magisk
5. reboot
This is only for the flashaholics right now! The rom works fine but the developers claims is still in its infant phase!
I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me
great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
quake73 said:
I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me
Click to expand...
Click to collapse
how about using firmware version?
jahidinbedod said:
great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
how about using firmware version?
Click to expand...
Click to collapse
added OB21 to my OP but stable 5.1.7 works fine, too
quake73 said:
added OB21 to my OP but stable 5.1.7 works fine, too
Click to expand...
Click to collapse
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?
jahidinbedod said:
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?
Click to expand...
Click to collapse
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file
quake73 said:
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file
Click to expand...
Click to collapse
yes I did
after booting up to the home screen
reboot recovery right?
then flash gapps + magisk
but not boot up (restart the logo)
what is the gapps + magisk version?
i use nano + magisk 17.1 stable
---------- Post added at 05:18 AM ---------- Previous post was at 04:33 AM ----------
@quake73
success using magisk 17.3 :good::good::good:
11/30 build 54MB? Bito treasures in your androidfilehost folder. Bliss. Hmmm.
same here,
afh link is showing CitrusCAF-v5.0-KeyLime-Pie-cheeseburger-COMMUNITY-20181130-2017.zip
for the OnePlus OnePlus 5, by quake73 = 54.9 MB ??
after downloading it is showing the archive is corrupt..
In afh click on quakes name, then oneplus5. There is a 11/29 build. Along with some other stuff. Havent tried it.
The Download file is 54MB??It must be for a Pen Phone
---------- Post added at 12:13 PM ---------- Previous post was at 11:16 AM ----------
Here is a link to 1129 Build 677MB
https://androidfilehost.com/?fid=11410963190603862312
---------- Post added at 12:38 PM ---------- Previous post was at 12:13 PM ----------
Clean installed 1129 Flash
ROM
Gapps
xXxNoverity
Magisk17.3
All in one go, boots up does all setting connects to wifi etc. looks OK
Yeah, you are right, 30/11 is only 54MB, I don't know how did that happen, I apologize. I guess it was some glitch with AFH. It is corrected now.
P.S. Magisk doesn't seem to work on 30/11. I modified the first post to point to the 29/11.
1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)
thaidroid said:
1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)
Click to expand...
Click to collapse
I do the same
I also have fully set up aex backed up for emergency restoring to a functional rom. As for the features - I believe the devs will slowly add them in the future. I follow their telegram channel, they still haven't released any official build for any device, i'd say it's still in its alpha phase. I hope they will continue their good work, I too am curious if the CAF base can give any measurable difference.
Added to the OnePlus 5 Index Thread here.
Can you keep updating?
Can you keep updating?
[email protected] said:
Can you keep updating?
Click to expand...
Click to collapse
Sure, I'll try making a new build whenever the Citrus' devs add something new or CAF sources get updated.
Nice, been waiting for a CAF based ROM to try and see the differences.
Thank you very much!
New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029
quake73 said:
New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029
Click to expand...
Click to collapse
good job bro :good:
i like based on CAF
wait for official release
####Validus OS####
Validus is GZOSP based with a Dark Wolfie theme
Minimal and useful features
Squared UI (Notification and Settings)
###Changelog###
Initial Build
Launcher3 as default
##Installation##
Wipe Dalvik,Cache,Data,System,Vendor
Flash ROM via TWRP
Flash Hotspot Fix
Flash Gapps(optional)
##CREDITS##
GZR - Team-https://plus.google.com/communities/109330559573276360638
KrasCGQ(Albert) for Device Tree
X00TD Group Members
##Sources##
Kud Source - https://github.com/KudProject/
Validus OS -
https://github.com/ValidusOs
####Download####
https://drive.google.com/file/d/1_DbUqVEgfSthHtO4vuivlXgSwppsoBeL/view?usp=drivesdk
###Bug Fix###
If you face blackscreen after hotspot or hotspot bug
Flash this via TWRP- https://drive.google.com/file/d/1V04kjDncfxrz9D5G6zsOVHvcax6KJugR/view?usp=drivesdk
Rom Version - 9.0.0 Pie
Kernel- Kud Kernel 4.4.x
Screenshots?
Going to try it now! lets see how beautiful is it! Current ROM Syberia, really loving it!
Seems to be super cool ROM. If provided Gcam that will be great.
refai said:
Seems to be super cool ROM. If provided Gcam that will be great.
Click to expand...
Click to collapse
You can use gcam by your choice, everyone has different preference,it has built in lawnchair
How is the battery backup on the ROM and charging speeds... Screenshots plz
any review of this rom?
Is otg working??
---------- Post added at 02:01 PM ---------- Previous post was at 01:54 PM ----------
Otg is not working on my device pls help me
vgvishnu said:
Is otg working??
---------- Post added at 02:01 PM ---------- Previous post was at 01:54 PM ----------
Otg is not working on my device pls help me
Click to expand...
Click to collapse
Use twrp for otg,as otg is not working almost in every pie rom
vgvishnu said:
Is otg working??
---------- Post added at 02:01 PM ---------- Previous post was at 01:54 PM ----------
Otg is not working on my device pls help me
Click to expand...
Click to collapse
Turn off your phonr, plugin otg, on your phone
Hello, I have been having issues installing Magisk on my Pixel XL device currently flashing with pixel dust 10.0.0_r36 link below, whenever I flash as instructed by the install page I just get a google logo bootloop and nothing seems to change I have tried asking help in various places and on the thread itself but none of it has helped so I figured might as well ask here as I'm stumped on how I can fix this.
https://forum.xda-developers.com/pixel-xl/development/rom-pixeldust-marlin-t3581750 <<- ROM release thread
fastboot flash boot patch img
then get root
---------- Post added at 03:47 AM ---------- Previous post was at 03:45 AM ----------
Im running bliss and dont have those issues
---------- Post added at 03:48 AM ---------- Previous post was at 03:47 AM ----------
Evolution X - Google Pixel Central
Evolution X - Google Pixel Central
Off Topic - @evolutionxOT
General Official - @evolutionx
News - @evolutionxOfficial
Updates - @evolutionxUpdates
https://t.me/EvolutionXPixel
---------- Post added at 03:49 AM ---------- Previous post was at 03:48 AM ----------
everyone in this forum help you
sean
Do not have the device at the moment I have just ordered it. But am currently building lineage os 17.1 so if all goes well will need testers
Awesome, I'm down to test I'm pretty good at finding bugs and ****, let me know. As long as it doesn't brick my phone I'm down, my MI 9 got perma bricked from Lineage but I'm not sure if it was from Lineage or I just got a defective phone. Probably was just a defective phone.
Looking forward to it!
News about this rom? @jonnieitis if you Need a tester contact me
---------- Post added at 05:13 PM ---------- Previous post was at 05:13 PM ----------
News about this rom? @jonnieitis if you Need a tester contact me
alexz230 said:
News about this rom? @jonnieitis if you Need a tester contact me
---------- Post added at 05:13 PM ---------- Previous post was at 05:13 PM ----------
News about this rom? @jonnieitis if you Need a tester contact me
Click to expand...
Click to collapse
if someone can tell me how to port lineage and create device threes i will build lineage , i already have lineage os's repo downloaded
I've never built custom ROMs before. However following the Lineage Build Guide for a similar device and following the building for new device guide. I hope to succeed.
I am in the process of downloading Lineage. I will need testers because I don't have the phone. The trees I've found are HERE.
Once I have a build (even untested) I'll create a thread in the development part and then hopefully more testers will arrive
---------- Post added at 03:40 PM ---------- Previous post was at 03:38 PM ----------
@SingleSliceOfCake check out the guide I mentioned above with the device trees I collected @jonnieitis I noticed you'd done a build. Are your sources similar to mine?
i've done the tree and vendor for monet for myself and it builds Resurrection Remix succesfully, but phone is getting bootloop after flashing it
T3cheN said:
i've done the tree and vendor for monet for myself and it builds Resurrection Remix succesfully, but phone is getting bootloop after flashing it
Click to expand...
Click to collapse
where are your tree and vendor for monet. Maybe I can help
Robert314 said:
where are your tree and vendor for monet. Maybe I can help
Click to expand...
Click to collapse
Tree:
Code:
https://github.com/T3ch3N/device-xiaomi-monet
Vendor:
Code:
https://github.com/T3ch3N/vendor-xiaomi-monet
Hi, any news on this. I would love to help to get lineage os running. I'm not a dev, but i build roms from sources in the past. Are these vendor kernel and device tree tested?
Interested in testing as well. Cheers!