Related
EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html
RESERVED
The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.
StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...
That's what I told you. Then please do.
noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing
Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!
So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Is there anyway to root the phone without connecting it to pc?
noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hello hello,
this will be my "live" thread of bringing AICP 13.1 to my xperia z1c, I found some Guide's that I will follow and I will share with you all the links and knowledge I gained as a newbie that I used to understand and fix my problems on the way.
Maybe this will help you, too.
Main Tutorial: LINK
Target of all this: LINK
My Device:
Sony XPERIA Z1C, 14.6.A.1.236 , Lollipop 5.1.1
My best hint: read carefully, take your time to understand what you're trying to do and do your own research!
Hopefully you will get a aicp custom rom out of it.
_____________________________________________
_____________________________________________
General information: Android 5.1.1 cannot be rooted due to its high security standards, therefore we will downgrade to a lower security stock rom and create root access there. Root access will be needed as well as an unlocked bootloader to install real recovery (TWRP) which is the tool to flash custom roms like aicp. But the aicp custom rom will not have a good working camera, don't ask me why, but the camera seems to be a really difficult thing from the point of developer's view, let's accept this. Aside of that disadvantage, this custom rom is a very nice software and it makes my z1c kind of new. I don't use my camera anyway often at all.
During all this flashing thing I had a very big ??? while implementing real recovery. I was able to flash the .236.ftf but not the openbootloader.ftf as described in section 5 in the main tutorial. The result was twrp boot failed.
Error description:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
boot stock rom works
My solution:
I restarted from scratch and finally with the kind of messed up secquenceI got it:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
flash openbootloader works
flash twrp works
boot twrp works
UPDATE 06.12.2018 as a solution for REAL RECOVERY with working camera <<< RECOMMENDED
0. boot into rom works
1. flash openbootloader works
2. boot into rom works
3. flash .236.ftf works
4. boot into rom & check camera works
3. flash twrp ( business as usal ) works
4. boot twrp ( First boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
5. full wipe, flash aicp-rom, flash gapps, flash magisk-root, boot system works
6. enjoy Oreo 8.1 & camera check !!! works !!!
This routine worked straight forward for me where I started from scratch with my second device.
Flashing aicp was pretty easy, good to know for flashing the rom was full wipe = advanced wipe and select everything except of micro sd
To complete my aicp 13.1 Oreo 8.1 device the camera problem has to be fixed ( Saving the taken picture fails, display goes into freeze, no chance to solve this with camera mods, camera apps )
But @lm089 gave me the right hint, and finally this was my solution! Thanks again @lm089!!
Have fun with your new >> SONY XPERIA Z1 COMPACT <<
How to update TWRP
1. Turn Off your device
2. Start device in fastboot mode by connecting via usb cable to your pc and press Vol- until blue led tuns on
3. use fastboot flash recovery twrp.img to flash it
4. boot twrp ( This first boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
How to update to aicp 14.0 pie 9.0
starting with the running and latest aicp 13.1 oreo 8.1 rom above I just followed the Instructions here. As a specialty I had to install the Magisk Manager App manually into the rom to get root. Downloading supersu.apk from www.supersuroot.org works fine as well.
Your fastboot connection doesnt work for some reason though u had this workin fine in the past? maybe u had a windows update. install your drivers again.
>> LETS KEEP THIS DEVICE ALIVE <<
_____________________________________________
_____________________________________________
More helpful links that I used:
Debug apps by creating logs
what is adb? an xda tutorial
ADB working Download Link and ADB Article on xda
xda flashtool error during setup: click
[NOOBIE] Basic adb commands and device partition overview
Latest TWRP 3.2.3-0 for z1c
root solution using flash tool
Restore DRM functionality after UB
If TA Backup dry restoration restoration fails: Solution and Download *.dll
Boot into recovery or fastboot mode
How to install TWRP
Magisk beats superSU
How to Install Custom ROM using TWRP for Android!
change boot animations
[TUTORIAL] Design Your Own Bootanimation
Backup & Restore Your ROM With TWRP
Terminology: odex and deodex
If the camera goes into freeze or saving the picture fails: This was my solution! /// But you better go straight with the steps of my update 06.12.2018, field tested!
THANKS A LOT TO @colaigor for his [BEGINNERS GUIDE]
Ok. So i dont have much time now but i can give some short directions.
1. Get unlock codes from sony for bootloader unlock
2. Instal adb and fastboot at your system(PC)
3. Instal z1c drivers
4. Instal flashtool
5. Unlock bootloader,root,flash recovery(search forum for "real recovery" ),flash root solution
6. Flash wanted rom,gaps
P.P. On second thought u dont need flashtool. All can be done with adb and fastboot commands from terminal
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
derjango said:
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
Click to expand...
Click to collapse
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Ok thank you :good:
flashtool log of openbootloader.ftf failed:
01/015/2018 13:15:58 - INFO - Device connected in flash mode
01/017/2018 13:17:19 - INFO - Selected Bundle for Sony Xperia Z1 Compact(D5503). FW release : 1. Customization : openbootloader
01/017/2018 13:17:19 - INFO - Preparing files for flashing
01/017/2018 13:17:19 - INFO - Please connect your device into flashmode.
01/017/2018 13:17:19 - INFO - Using Gordon gate drivers version 3.1.0.0
01/017/2018 13:17:20 - INFO - Opening device for R/W
01/017/2018 13:17:20 - INFO - Device ready for R/W.
01/017/2018 13:17:20 - INFO - Reading device information
Click to expand...
Click to collapse
solved, I skipped step 5.2, flashing the .236.ftf in advance
but how can I start TWRP?
doesnt work with POWER + Vol-, vibrate & release power
I tried to flash the following recovery solution using this command:
smartphone in fastboot mode (blue LED enabled)
fastboot flash recovery recovery.img
TWRP from step 5.1 of the GUIDE
TWRP 3.0.2
My formerly flashed .236.ftf rom works fine, but I cant start TWRP the device goes directly to my rom
zlata said:
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Click to expand...
Click to collapse
Thats where I'm stuck right now, any ideas how to fix?
okay got it, basically i do not know what the problem is but:
after BLU
flash .236 :good:
flash openbootloader
flash twrp :good:
--> failed to install openbootloader and probably thus twrp failed
solution: I skipped to flash .236 as recommended by the author of the GUIDE (step 5.2)
flash open bootloader :good:
flash twrp :good:
--> failed to start twrp, though it was installed successfully
flash .236 :good:
flash openbootloader (failed again, but it's already on the device and I guess I could have skipped this here)
flash twrp :good:
first boot of twrp is successful :good:
And basically the author explained it in his text, FIRST INSTALL OPEN BOOTLOADER BEFORE WRITING STH TO RECOVERY PARTITION
I think you should use Aicp 14 pie instead of 13.1 Oreo
I feel Aicp 14 PIE is very stable and flash port camera stock this link https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-stock-camera-nougat-roms- t3628791
Nice thread, thank you! Wish I had that when I started rooting and flashing
@lm089 Haha it's quite some work to get into it, right? I just saw that we are running on the same device & custom rom, how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
derjango said:
how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
Click to expand...
Click to collapse
Had this situation twice with 2 different oreo ROMs. Both times I solved it following a rather strange sounding suggestion I found on the AICP 13.1 discussion thread. The basic idea is to go back to a stock Sony ROM. Boot into it and make sure the camera is working which for me was the case both times. Then - if necessary - re-root your phone (on first occasion I flashed a pre-rooted .236 version but that caused some extra trouble so next time I decided to flash an unrooted version). And from then on it's the standard way as you described it in your OP.
Good luck!
Okay, thanks a lot for your hint! Unfortunately the camera mod didn't fix the problem, my android-task for this evening is defined:
AICP 13.1 Oreo 8.1 on z1c, root, ulb, magisk 17.1
1. backup my system (done)
2.0 flash stock rom lollipop 5.1.1 (14.6.A.1.236.ftf) with flashtool via usb (done),booting the os for the first time takes quite long (~10m), check camera in the os (done)
interesting fact: recovery is deleted by flashing the rom via flashtool - I thought I can go the lazy way and skip the step of installing twrp again into recovery
2.1 okay, let's do it: install twrp (done) and boot into twrp, NOT into ROM!! (done) (Vol- & Power, wait for vibration & release Power but keep Vol- until TWRP starts up)
3. flash aicp 13.1 following this (full wipe as an advanced wipe: select all EXCLUDING THE SD STORAGE)
Again here, I recognized the first boot of the rom takes quite longer.
4. check camera (done)
!!!! IT WORKS !!!!
(I did it two times)
alright, lets start flashing my second device - now I know how to do it
Thanks guys!!
derjango said:
!!!! IT WORKS !!!![/SIZE]
Click to expand...
Click to collapse
Weird, isn't it?
lm089 said:
Weird, isn't it?
Click to expand...
Click to collapse
Totally But hey, it's a solution
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
derjango said:
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
Click to expand...
Click to collapse
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
lm089 said:
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
Click to expand...
Click to collapse
Yes, its used as an external storage
derjango said:
Yes, its used as an external storage
Click to expand...
Click to collapse
ok, that's something different; adoptable storage means that your SD or part of it is setup to extend internal storage. If you can access all of your SD from TWRP then it is indeed formatted a external storage.
1) How to unlock bootloader:
https://developer.sony.com/develop/...ed/unlock-bootloader/how-to-unlock-bootloader
2) Download Platform-tools (adb & fastboot) r.26.0.2 as latests version does not work (or just for me):
https://xiaomifirmware.com/downloads/download-platform-tools-adb-fastboot-r-26-0-0/
3) Download TWRP 3.2.3-0 https://androidfilehost.com/?fid=11410963190603854057 and place file in Platform Tools folder on PC
4) Restart in fastboot mode and flash revovery:
fastboot flash recovery Z1C_twrp_3.2.3-0.img
fastboot reboot
5.1) Download AICP Oreo 8.1 http://dwnld.aicp-rom.com/device/amami/WEEKLY/aicp_amami_o-13.1-WEEKLY-20181204.zip and place file in Platform Tools folder on PC
5.2) Download Gapps Pico https://opengapps.org/?download=false&arch=arm&api=8.1&variant=pico and place file in Platform Tools folder on PC
5.3) Download stable Magisk 17.1 https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip place file in Platform Tools folder on PC
6.1) Load TWRP. Advance>ADB Sideload (for Oreo)
adb sideload aicp_amami_o-13.1-WEEKLY-20181204.zip
(do not restart)
6.2) Repeat Advance>ADB Sideload (for Gapps)
adb sideload open_gapps-arm-8.1-pico-2018XXXX.zip
(do not restart)
6.3) Repeat Advance>ADB Sideload (for Magisk)
adb sideload Magisk-v17.1.zip
(restart)
I'm trying to install magisk on MiA2Lite with january update but I fail.
I've tried
- Zip installation (Magisk Manager -> download .zip) but when I reboot on TWRP i don't find zip, all folders seems empty
- upgrade boot image: the upgrade semmes works well but when I restart MiA2Lite and I open Magisk Manager I alway see "Magisk is not installed" ed if I tap on INSTALL Magisk Manager propose: "download zip or upgrade boot img"..
the option "direct install (recommended)" dosn't apear to me
IO13 said:
I'm trying to install magisk on MiA2Lite with january update but I fail.
I've tried
- Zip installation (Magisk Manager -> download .zip) but when I reboot on TWRP i don't find zip, all folders seems empty
- upgrade boot image: the upgrade semmes works well but when I restart MiA2Lite and I open Magisk Manager I alway see "Magisk is not installed" ed if I tap on INSTALL Magisk Manager propose: "download zip or upgrade boot img"..
the option "direct install (recommended)" dosn't apear to me
Click to expand...
Click to collapse
If you want to install magisk from TWRP:
-Put the magisk.zip on your fastboot folder,
-Boot to TWRP and connect the phone to your PC, then use this code :
Code:
adb push ./magisk.zip /sdcard
-Now, you will be able to see magisk.zip on the Install section of your TWRP. Make sure to rename the magisk installation zip to "magisk.zip"
If you want to install without TWRP:
-Get patched_boot.img for 10.0.3.0 here: https://forum.xda-developers.com/mi...hed-boot-img-v10-30-0-january-update-t3891331
-Put the img in your fastboot folder, shutdown your phone.
-Go into fastboot mode on your phone (hold Vol- and Power)
-Connect phone to PC and write this on ADB:
Code:
fastboot boot patched_boot.img
-Let it download the img to the phone then unplug and wait for it to boot.
-Install Magisk Manager and tap Install->Direct Install
Next time, before you open a thread, please try reading other threads. Because this is explained pretty much all over the forum. :good:
marstonpear said:
Next time, before you open a thread, please try reading other threads. Because this is explained pretty much all over the forum. :good:
Click to expand...
Click to collapse
I assure you that if I would have preferred to find the information myself rather than wait for some kind user to answer me. Unfortunately it is not so simple, there are many double posts with information missing (you imagine a new user who wants to try to install the GCam, there are several posts on the subject with redundant or sometimes opposite information, there are two posts on how to install Magisk without losing the OTA, they are almost identical but in one there is written that with Pie no longer works, in the other no ..). Look for an info here with the search function is anything but simple so thank you for answering me so exhaustively!
marstonpear said:
If you want to install magisk from TWRP:
-Put the magisk.zip on your fastboot folder,
-Boot to TWRP and connect the phone to your PC, then use this code :
Code:
adb push ./magisk.zip /sdcard
-Now, you will be able to see magisk.zip on the Install section of your TWRP. Make sure to rename the magisk installation zip to "magisk.zip"
If you want to install without TWRP:
-Get patched_boot.img for 10.0.3.0 here: https://forum.xda-developers.com/mi...hed-boot-img-v10-30-0-january-update-t3891331
-Put the img in your fastboot folder, shutdown your phone.
-Go into fastboot mode on your phone (hold Vol- and Power)
-Connect phone to PC and write this on ADB:
Code:
fastboot boot patched_boot.img
-Let it download the img to the phone then unplug and wait for it to boot.
-Install Magisk Manager and tap Install->Direct Install
Next time, before you open a thread, please try reading other threads. Because this is explained pretty much all over the forum. :good:
Click to expand...
Click to collapse
Bro.. i'd like to ask
So the diffrence/concept is , if
- with twrp we dont need patched boot.img
- without twrp (we need patched boot img)
Are we can flash stock rom via twrp? So dont need fastboot anymore? At least fastboot for emergency case only
And last why right now is so much step in order doing mod, last time i doing mod with my samsung galaxy grand 2, the key is only how to install custom recovery (cwm or twrp) , from that recovery if we want to install custom rom or root , just download zip , flash from custom recovery, enjoy.... Simple
Why in this phone not like that, especially install GSI rom ( which still im not clearly about GSI and difference with custom rom)
bla.tiga said:
Bro.. i'd like to ask
So the diffrence/concept is , if
- with twrp we dont need patched boot.img
- without twrp (we need patched boot img)
Are we can flash stock rom via twrp? So dont need fastboot anymore? At least fastboot for emergency case only
And last why right now is so much step in order doing mod, last time i doing mod with my samsung galaxy grand 2, the key is only how to install custom recovery (cwm or twrp) , from that recovery if we want to install custom rom or root , just download zip , flash from custom recovery, enjoy.... Simple
Why in this phone not like that, especially install GSI rom ( which still im not clearly about GSI and difference with custom rom)
Click to expand...
Click to collapse
You can't flash stock ROM with TWRP, unless you use a backup of your own stock ROM, then you can recover your backup to install stock. Also you're talking about 6 yr old phone. Many things have changed since then on Android lol. GSI means Generic System Image which means that these roms should be able too boot on every device with treble support. Instead of creating a rom from scratch for every device, they just make a GSI and that can be installed on every GSI supported (project treble enabled) phone. You can still install TWRP and flash what you want. But beware you might have issues and Mi A2 Lite doesn't have any custom ROMs yet, because it is project treble enabled. You can use GSIs for now but most of them lag so I stick with stock. You can try modding the stock rom with magisk etc. :good:
marstonpear said:
You can't flash stock ROM with TWRP, unless you use a backup of your own stock ROM, then you can recover your backup to install stock. Also you're talking about 6 yr old phone. Many things have changed since then on Android lol. GSI means Generic System Image which means that these roms should be able too boot on every device with treble support. Instead of creating a rom from scratch for every device, they just make a GSI and that can be installed on every GSI supported (project treble enabled) phone. You can still install TWRP and flash what you want. But beware you might have issues and Mi A2 Lite doesn't have any custom ROMs yet, because it is project treble enabled. You can use GSIs for now but most of them lag so I stick with stock. You can try modding the stock rom with magisk etc. :good:
Click to expand...
Click to collapse
Oh i see.. thanks for the explanation... Gathering information in xda is bit confusing lol
Okay one more thing to be clear, right now im on oreo august security patch V 9.6.6.0 ODLMIFF
I want to install twrp and flash magisk (do i need downgrade to 9.6.4.0?) , if i succeed install both of that, and i want upgrade rom to pie or upper version via fastbot flash, i need to remove twrp and magisk, or just directly flash with mi flash??
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Well, you didn't had TWRP as recovery, so no nandroid backup available. From one of my experiences with flashing a stock rom for acer, I had to delete some lines of code from the meta inf folder relating the version of the phone, in order to successfully flash it. Maybe the stock ROM you are trying has some lines of code detecting if bootloader unlocked.
Im also having trouble getting a good tutorial for getting rid of the os or just to have magisk on the tablet
You dowoad latest rom and flash stock via hru and. Twrp search xda
unbrick Huawei MediaPad M5 Lite
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Click to expand...
Click to collapse
Unbrick using Huawei Multi tool .
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what could do next to approach the problem?
dnrob
Click to expand...
Click to collapse
You can install these roms only if you can downgrade to update v177 and lower
Like me you need to Unbrick your mediapad m5 lite
First place need to go back in Fastboot mode.
So UNPLUG , turn off , wait a second and turn on with volume Down , when screen blink release power button and keep volume down pressed a second until Fastboot mode
Or, try to boot in Fastboot with volume down + power AND USB plugged in goes into fastboot, or TWRP if you flashed TWRP to RECOVERY2 instead to RECOVERY.
If doesnt work try the same plug or unplug cuz we have Recovery_ramdisk , eRecovery and eRecovery2
WHEN its okay and you can turn on fastboot mode
Second prepair the img's for unbricking
The LEGIT methods its come back stock rom , then you'll be able to do what you want.
Download Huawei Multi-Tools , Huawei Update Extractor and update.zip of your stock ROM and update_data_full
Then use Huawei Update Extractor to extract
system.img ramdisk.img recovery_ramdisk.img From update.app\update.zip and
Cust.img from update.app\update_full_public.zip.
If you have backup of your userdata.img its the time to put all together in the same directory before go futher.
If all its good , you just need to click unbrick.
Maybe i'll soon do a guide for unbrick and prevent brick , and how install twrp without losing data or encryption data
helmuth said:
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
Click to expand...
Click to collapse
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
BesterTrainer said:
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
Click to expand...
Click to collapse
sasuke988 said:
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
Click to expand...
Click to collapse
https://
pro-teammt.ru/
en/
online-firmware-database/
?firmware_model=BAH2-W19&firmware_page=0
Check out your model (C432C431/...)
Use the huawei extractor to extract the images
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Raresh T said:
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Click to expand...
Click to collapse
It's for the 8" screen variant. It won't work on our 10.1"
is there any current custom house for this model because no links work. And on the stock, I have a problem with 5ghz Wi-Fi
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
SkipM4 said:
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
Click to expand...
Click to collapse
thats an interesting suggestion. could you post some guides on how could someone rebrand their device ?