I got this phone refurbished from Warehousedeals for the SO.
Does anyone else have charging problems?
It does not charge fully. It is super picky about the charger (eg 90% of phone chargers don't work) and it apparently does not fast charge when connected to the Nokia charger it came with.
Seems to me like this refurbished is actually broken …?
I had similar problems. Turned out the problem was in the original charging cable. Bought a new one, and everything is ok for now.
Similar issues here and I also own a refurbished model. Gonna buy and try a new charging cable from Amazon as the above post said. Hope that fixes the issue.
Edit:- New cable fixes the issue.
Related
So when the unresponsive screen when grounded issue came about, I didn't really notice the problem much myself. However, recently, and I'm not sure when this started, the screen has become horribly unresponsive when charging any time! Doesn't matter if it's on desk, in my hand, stock charger, 3rd party charger, etc., if it's charging at all, the touch screen only accepts half or less of my inputs, making typing impossible. Is this due to the last software update? Anyone else experience this issue? I would exchange the phone, but not if it's not going to help anything.
this happens to me when i use my cheap ebay charger
The fps lifting kernels fix this.
+1 for symtoms seen when using a wonky charger/cable.
+1 due to cheap charger - anyone know why this happens? is the OEM usb cable different spec from the cheap ones?
Hate to beat a dead horse, but the same happens when I plug my phone into the charger I got from eBay. Kind of disappointing, considering that I would otherwise be able to charge two batteries at the same time.
I notice this issue with the stock charger.
I believe the issue was when its not grounded..
Being plugged in is just about the most grounded your phone can get.
That's not the problem.
Starting to do it to me also now.
Just to be clear, this happens to me with the STOCK charger.
r546 said:
Just to be clear, this happens to me with the STOCK charger.
Click to expand...
Click to collapse
I'm having the same issue. i just chocked it up to the new kernel.
one thing i did notice is it seems to be intermittent. Yesterday night, it worked fine. this morning(conveniently when my alarm went off) i could NOT get the dismiss thingy to slide down.
Anyone else experiencing this? I do think it got worse after last software update. Would be nice if the next one improved things.
I emailed support, they did not say anything about it being a known issue, and suggested a factory reset. If that doesn't help, they recommended using my warranty. Would like to hear from more people before going through with the reset.
It happens to me when charging via outlet. Charging via USB connected to computer does not produce the issue.
I think it has to do with grounding.
Same thing happens to me! I noticed it with my aftermarket wall charger.
Bringing this back up, happens to me with a Stock charger.
Is it really the kernel? :\
@Person who said charging is the most grounded, the stock charger is not grounded ( in AU anyway ) and therefore it is the LEAST grounded.
ive noticed this happening over the past month or so. i've got to admit i've only really noticed this when its plugged into a usb cord i got off ebay. relieving to think it might only be an issue with it being a cheap cable and not the phone but i'll verify tonight with the stock cable.
I've been plagued by this problem for weeks and just discovered that it only happens when charging. I use the stock charging cable and wall adapter. I'm very, very happy to know what the problem is. I'm going to start testing this at various locations.
EDIT: I've tried this on both the wall adapter at work and on my work computer's usb. Same problem, though it seems worse when plugged into the wall outlet.
The touchscreen is fine on my sprint brand car charger and on the usb charger on my laptop. However, it starts missing taps when I plug my usb cable into my usb car charger. I'm going to best buy tonight to buy a different charger and see if that helps.
Sent from my Virus Infected Evo using the XDA app.
I have these issues as well with the stock charger and cable regardless of which kernel I use.
I've had my G4 since almost launch day and within weeks the supplied USB cable stopped charging the phone. I thought it was a cable problem, but it worked fine with other devices.
I tried other cables with the G4 and these still charged it so I thought nothing more of it until charging degraded with every USB cable I own to where the phone would only charge 20-30% during an overnight charge and the phone would frequently not recognise it was plugged in at all. I contacted LG who did a repair under warranty and all was fine.
I've now had the repaired phone back for about 3 weeks and the same problems are starting up again and it's only a matter of time until I am forced to return again for a repair.
Is anyone else having similar problems? I thought I may have just had an unlucky manufacturing problem, and the LG reps confirmed that to repair my phone they basically replace all the internal circuit boards and components rather than just replacing the individual component that is faulty (in this case the USB/charging port)
Basic debugging includes asking stupid questions, so please forgive but still answer any of those
Are you using a different charger? If so, check if that one is within specifications and if you do send in for repair again, use a different charger.
Are you propping up the device at an odd/weird angle or in a dock of some sort with the cable attached?
(As they replaced the entire print, it's probably not this, just the USB-micro port bent or broken.)
You could double check the wall outlets being used, there might be some kind of electrical problem there.
Either using all kinds of fancy electical testing gadgets, or stick a USB light into the hub or charger, does it flicker?
When sending it back for repairs, did they check the stock charger as well?
Hopefully these questions help you find any logical or plausible cause.
FreezyExp said:
Basic debugging includes asking stupid questions, so please forgive but still answer any of those
Are you using a different charger? If so, check if that one is within specifications and if you do send in for repair again, use a different charger.
Are you propping up the device at an odd/weird angle or in a dock of some sort with the cable attached?
(As they replaced the entire print, it's probably not this, just the USB-micro port bent or broken.)
You could double check the wall outlets being used, there might be some kind of electrical problem there.
Either using all kinds of fancy electical testing gadgets, or stick a USB light into the hub or charger, does it flicker?
When sending it back for repairs, did they check the stock charger as well?
Hopefully these questions help you find any logical or plausible cause.
Click to expand...
Click to collapse
Hi FreezyExp,
1. I am using the standard charger that came with the phone, but this has not been repaired/replaced. I have tried other chargers too, but all the same issue.
2. No weird propping up or anything like that. If I hold my phone while it is plugged in it is constantly vibrating as the charger connects and disconnects, and if I place it on the desk to charge I have to ensure that I have at least 3-4" of cabe "on the desk" to give it enough support to make the connection.
3. Wall connection is fine and I have tried it with a range of outlets around the home, both with extension sockets used and plugged directly into the wall and there is no different. No flickering light when using a USB light either.
4. When I sent it back all they asked me to return was the main section of the handset - so no battery or rear cover, no cables or chargers etc
It does seem to be the same issue as last time, a USB connection becoming loose from the main motherboard, but it seems weird that I have had the same issue twice in the space of 4-5 months.
I've been having some sort of problem with my G4 usb port. If I plug it in to a computer, it will lose connection and get a connection again if I barely touch the end of the cord at the phone end. I've tried many different cords and different usb ports on my computer, but it still has problems.
I can't fast charge, either. When I plug it in to fast charge, it actually starts discharging even faster. I've had some extreme battery life problems, too. It drained from 100-36 the other night with everything disabled, and it's been doing that kind of thing a lot lately. I'm guessing that the charging port is what's messing up my battery life because it won't charge correctly.
Never dropped it or anything.
I got my G4 on January 24 and my USB port has also failed. I am getting a replacement from Verizon, but am concerned that a six month old phone has this issue.
I also own a G4 H815. A while ago the phone started not receiving any charge from the cable and I would have to prop it up from right under the cable's micro usb end. Thought it was because it was bent inside the port and not making connection with the cable so I had the port replaced. Now I'm experiencing the same problem and I think it might be the cable that's already gone kaput and is effing up the port itself. I took the phone to the same place to get the port replaced again and bought new cables (I lost both the original adapter and the cable, which were charging slow anyway. Now using a 2A Asus adapter which works great) and when I asked the guy at the repair shop, he says it's a chronic issue with G4 devices. I don't really understand how it would happen twice in just a few months even with a new charger port. What should I make of this? Did they replace my port with an already faulty one, cahrged me full price and now trying to sell this bogus or am I really doomed with this phone?
Hi all,
a few days ago my phone stopped charging using the stock wall charger, connecting N5X to may PC using a cable was (and is) still working.
I thought the charger was broken, I tried my old Nexus 5 charger with no luck, I then bought a new compatible charger from Amazon which had the same problem so I guess it's something with my phone.
The thing I don't understand is how via USB I can still charge the N5X, anyone had a similar problem?
I guess my only option is to RMA the device (which I'd rather not of course, unfortunately I will have to deal with LG directly).
Thanks
My charger is failing now, its output voltage has significantly dropped. Does anyone know a good charger replacement?
I think Xiaomi sells the official charger from their store/app. You give it a try
I'm having the same problem since 3 4 months. I bought the mivi cable and same problem was still there..i thought the problem is with the cable then i replaced it with brand new cable but the problem is still there. The actual problem is with the charging port.
So charging is extremely slow now: max 280mA showing in Ampere app. Tried different cables and chargers(QC3.0 certified), charging speed remains the same.
I can't connect to PC anymore. Windows doesn't even make a sound when I connect the phone to PC. Showing no device.
Headphones connected to USB port are playing only one audio channel.
I've been using LOS 15.1 since last summer without problems, haven't done any updates since. The problem with USB port emerged a month ago and I am almost convinced it's a HW issue. AIDA64 indicates no temperatures over 36°C in thermal section so sensors are working fine I guess.
Anyone tried these charging ports from Aliexpress? Comments indicate that they are not the same as the original.
It really sounds as hardware problem. I asume you already tried with the phone off, and after factory reset and the problem persists.
In my experience, the original lower board have fuses which are expensive and are replaced by resistors on chinese replacements. If you dont want to lose this, try going into a repair shop and have the USB-C port replaced or desoldered/resoldered from the board. Must be done by experienced guy or it will be melted.
I'd buy the replacement board anyway. As long as you don't use crappy chargers, you shouldnt need the fuse too much, and also, the phone have another fuse in the motherboard.
If you have not tried with the phone off, try it. I got the xiaomi wireless charger and it works like crap with the phone on. it disconnects/maintains chage/stops charging A LOT, but if I charge the phone turned off it charges without issues at full power (8-10W according to my USB meter). Maybe is just the firmware being an ass
Thank you for insights. I confirm that hard reset nor charging solved the missing QC3.0 functionality. It's clearly a HW issue.
The whole situation was caused by losing my original charger on a trip and then using certified QC3.0 charger (not from Xiaomi) and unfortunately - cheap Chinese micro USB C cable. I can't stress this more... Never use cheap cables (or chargers) they can literally fry up your port. In this case it was definitely the cable eventhough it worked fine for 5 months.
It seems (from comments) that beside fuses the charging ports from Aliexpress are missing the possibility to transfer data over USB as well. Which is not that crucial because FTP over WiFi is bearable. The real problem that I need to fix is quick charging because with 280mA on Ampere app it takes 5 hours to charge this phone.
The charging port I've bought on Ali is on its way so I will update this thread in a few weeks after inserting it into the phone.
Losing data over usb is quite a problem if you are into custom roms/mods on native miui (which resets the recovery on each update).
Hope that ali's board does have this funcionality. About charging, you can get locally a wireless charger for now, though for me it only charges fast when the phone is idle, using it always just keeps the charge (probably to avoid overheating).
So how the story ends? We're you able to solve the problem?
I had the same issue with my Mix 2. bought a replacement port from Aliexpress and Witrigs.com. As posted on most forums these replacement ports don't support fast charging (in most cases) and no USB data transfer (this is the case with mine).
I had dropped a message on the witrigs.com website to confirm if their supposedly 'OEM' replacement supports data over USB (it looks much more like the original board in the phone that the 'custom' replica one that is half the price).
but I'm not very hopeful of that being the case, given someone has already left a comment on the product page indicating they bought the OEM version and faced the same issue with no quick charging or USB data transfer
Got some problem when i lost my usb travel charger on a trip.
and now my phone was too slow and cant transfer data even if i buy the new authentic from xiaomi store.
i hard reset for 3 times and but no luck.
omg -___-
I know it's old, but I'll let you in on my problem.
I have the Mi Mix 2 and it was happily fast charging until recently. Still the original plug and cable
I have tried all sorts of theories to get it fixed and one person said to charge it while turned off
So I plugged in my usb cable and turned off my phone. Only for it to automatically fire up and go into fastboot. No charging. Just fastboot on the screen
Obviously I can get out of fastboot mode again, but is mine an option change in the settings that needs addressing?
Thanks