{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
It's oxygen os port for zuk z2. This is the latest oreo version of oxygen os rom available. This port brings all the software feature of oxygen os except for those required hardware such as nfc, alertslider, etc.
Status :
stable
Bugs :
# silent mode, due to absence of alert slider
workaround: added added swipe right to silent and you can also use app that add volume tile to notification drawer.
Instructions :
-WIPE Dalvik/Art Cache, Cache, Sytem, Data, Vendor (if exist)
-Reboot to recovery
-FLASH OOS ROM
-Reboot and do the initial device setup.
-Now reboot back to recovery to flash the patch
[ Remember, flash patch after first boot otherwise it will cause boot-loop.]
Note :
device might warm up so after set up just leave it for 5-10 min to cool down.
If you for some reason wiped data, use the revert zip immediately then reboot to avoid bootloop after that you can use the patch .
Downloads and Screenshots :
https://drive.google.com/open?id=1aC_aOLLCkh2nI5A4VPAcVlJyVXXys1O9
Magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Have a good day! :good:
Please read before proceeding to installation.
Check the instructions.
Please check screenshot, most doubt will be cleared.
Its oxygen os, so it already has gapps.
Contributors
Dhananjay_Yadav
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlock Bootloader and Twrp
Based On: OOS
Version Information
Status: Stable
Current Stable Version: V311
Stable Release Date: 2018-07-29
Created 2018-07-29
Last Updated 2018-10-23
XDA:DevDB Information
OxygenOs Oreo for Zuk Z2, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Dhananjay_Yadav
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlock Bootloader and Twrp
Based On: OOS
Version Information
Status: Stable
Current Stable Version: V311
Stable Release Date: 2018-07-29
Created 2018-07-29
Last Updated 2018-10-23
reserved
any bugs left?
Review after initial use of 1 hour
Rom is very smooth....
Gcam+OPcam working great
Benchmark screenshot attached(Antutu 135478)
Everything Working...
Battery backup good..(still testing)
VoLte Working perfectly
Will update Soon...
@Dhananjay_Yadav
Just flashed and here is what I have to say-
Bugs-
face unlock doesn't work
ph2w doesn't work
Hal 1 camera apps dead(Insta, Whatsapp, etc..)
Pocket mode is bugged(fp stll detected even when pocket detection is turned on)
Overall rom is stable as compared to my port but bugs are quite same
Would be great to see these bugs fixed in coming updates
Any bugs
Where is Jack fix zip?
dcoolguy said:
Where is Jack fix zip?
Click to expand...
Click to collapse
rom include aroma installer, so after debloat option, in mod menu second option ( do this after first boot ).
Will it change the baseband?.. In your nougat port, I heard reports that baseband gets changed to 1.70 from 1.76..
I'd like to try your tom but this is my only concern.. Could you clear this up? Thank you in advance
SteelBodyX said:
Will it change the baseband?.. In your nougat port, I heard reports that baseband gets changed to 1.70 from 1.76..
I'd like to try your tom but this is my only concern.. Could you clear this up? Thank you in advance
Click to expand...
Click to collapse
Nope.. this one doesn't change baseband
sidS6 said:
Nope.. this one doesn't change baseband
Click to expand...
Click to collapse
Did you try it? I really don't want to mess with my baseband.. Also, if you did try it then did you find any bugs even if it's minor..
SteelBodyX said:
Did you try it? I really don't want to mess with my baseband.. Also, if you did try it then did you find any bugs even if it's minor..
Click to expand...
Click to collapse
Yeah I am currently running it.. awesome tomorrow, no bugs noted so far
---------- Post added at 08:37 AM ---------- Previous post was at 08:36 AM ----------
sidS6 said:
Yeah I am currently running it.. awesome rom no bugs noted so far
Click to expand...
Click to collapse
Rom*
---------- Post added at 08:43 AM ---------- Previous post was at 08:37 AM ----------
What's app camera and recording not working :'(
---------- Post added at 08:51 AM ---------- Previous post was at 08:43 AM ----------
@Dhananjay_Yadav 3rd party apps are unable to use camera? Is there a workaround for that?
Dhananjay_Yadav said:
rom include aroma installer, so after debloat option, in mod menu second option ( do this after first boot ).
Click to expand...
Click to collapse
Bro what is Aroma Installer . Im a kind of noob can you explain how to flash jack fix zip.
Srinivasan9 said:
Bro what is Aroma Installer . Im a kind of noob can you explain how to flash jack fix zip.
Click to expand...
Click to collapse
about aroma installer
Just start flash process you will understand ....
simple just start flashing, follow instruction given, but don't select fix jack option this time, after first boot, reboot to recovery again and flash same zip and this time just select fix jack option (in mod section).
sidS6 said:
@Dhananjay_Yadav 3rd party apps are unable to use camera? Is there a workaround for that?
Click to expand...
Click to collapse
there is, give me some time i will post it after testing.
Trying it out, will edit this post with review in a few days.
EDIT:
1. ROM is super fast. Fastest ROM I've tried on this phone.
2. Phone crashes if I try to disable Vibrate in Silent mode in Alert Slider.
3. Default GCam works, just remember to change the settings as dev has advised. Also, Lens Blur and Photo Sphere not working. OnePlus Camera also working flawlessly.
4. Double tap to wake, along with all screen off gestures don't work.
5. Battery life is decent so far...standby is good, but drains pretty fast when using the phone.
6. Face Unlock doesn't work.
7. Night Mode doesn't turn off automatically.
8. Ambient display turns on, but touch doesn't work.
9. Other apps (Snapchat, Instagram, etc.) can't use the camera. This is the only major issue. I hope a fix comes out for this.
Will keep updating this post.
sidS6 said:
[/COLOR]What's app camera and recording not working :'(
@Dhananjay_Yadav 3rd party apps are unable to use camera? Is there a workaround for that?
Click to expand...
Click to collapse
HAL1 error,
whatsapp, insta snapchat and tg cam wont work.
same bug on OOS 8.1 op5t port.
Apps cannot read the camera.(For example cannot use camera to read the QR code to pay)
except this, this rom is really perfect
Faceunlock does not seem to be working
Pubg reviews please.
Sent from my Pixel XL using Tapatalk
Related
Team Firangi Presents to you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclamer
As you people might know recently OnePlus released Open Beta 23/11 for the 5/5t which enabled the support for project treble on those devices. This ment that oxygen os finally had native support for treble for A only devices. What this means in a nutshell that this rom brings the newer ui and features from it and has made porting cross platform roms a lot simpler.
NOTE
->This is a alpha release and you'll find various bugs here and there, our team is working to fix them so please co-operate.
->Don't complain about lags and battery life project is still in alpha stage.
->Flash suncool and boost mod by @characteres
What is this?
It's oxygen os port for zuk z2. This is the latest Oreo version of oxygen os rom available. This port brings all the software feature oxygen os except for those required hardware such as nfc, etc.
Status :
Alpha
Bugs :
#Unable to save wifi network
Workaround:- Restore wifi backup from other rom
#Hal 1 camera apps dead
Workaround:- Use gcam mod
#No do not disturb mode due to alert slider absence.
Workaround :you can use airplane mode or just disable vibration from setting/sounds and lower volume.
Instructions :
Prerequisite : TWRP, Unlocked bootloader
IF you are using any TREBLE ROM:
-WIPE Dalvik/Art Cache, Cache, Sytem, Data, Vendor
-Reboot to recovery
-FLASH OOS ROM
-FLASH patch
IF you are using any NON-TREBLE ROM:
Refer this thread first
Downloads :
Rom:- Here
Patch:- Here
Wanna help me? Buy me a coffee :
paypal
paytm
Have a good day!
Please read before proceeding to installtion
Check the instructions.
Please check screenshot, most doubt will be cleared.
Its oxygen os, so it already has gapps.
Credits:
Art Chen
amog787
kenny3fcb for his kernel
10 Testers
XDA:DevDB Information
Oxygen OS beta11 port for Z2_Plus, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
devabhi, erfanoabdi, narshi shukla
Source Code: https://github.com/AOSiP-Devices/kernel_zuk_msm8996
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Treble twrp
Based On: OOS
Version Information
Status: Alpha
Created 2018-07-11
Last Updated 2018-07-11
PS:- this rom is not daily driver yet as you still find some issues, if you face some feel free to attach a log along with the description in the comments below
Screenshots-
Here
how to backup and restore wifi backup??
Yay finally oos for z2?
Wow, great work bro
Finally OOS ! GREAT WORK
poran123 said:
how to backup and restore wifi backup??
Click to expand...
Click to collapse
Use swift backup.
My device baseband version is 1.76 can I flash this build ??
GaZillionAire said:
My device baseband version is 1.76 can I flash this build ??
Click to expand...
Click to collapse
Yeah
Reserved for review
the magisk link is broken, we can take the oficial lastes stable magisk (16) ?
vladimir.jz said:
the magisk link is broken, we can take the oficial lastes stable magisk (16) ?
Click to expand...
Click to collapse
obviously you can
Love u! [emoji7]
Wysłane z mojego G8342 przy użyciu Tapatalka
Will it replace 1.76 baseband with 1.70 as it did previously?
vladimir.jz said:
the magisk link is broken, we can take the oficial lastes stable magisk (16) ?
Click to expand...
Click to collapse
Sorry for the broken link, official magisk is compatible
Finally sm1 is trying. Thank u so much. Really appreciate your hard work.
whoa !! 16 views & 15 replies?
abhi.goel said:
whoa !! 16 views & 15 replies?
Click to expand...
Click to collapse
VoLTE working perfect.
oxygen os beta 11 review
so, everything basic is working. :good:
no problem in phone calls, data connectivity,
a lot more better in heat and battery management when compared to the older test builds
volte working
double tap to wake is working
three finger gesture working
navigation gestures working
some bugs (including the bugs stated in the op)
1. wi-fi problems as stated
2. stock camera as stated (gcam works perfectly)
3. brightness bug hasn't been solved yet, even after flashing the provided patch .. (lowest point will turn off the display)
4. screen wake up time is a little slow. (makes us think that fingerprint is slower, but its not)
5. as stated , face unlock registers the face but doesn't unlocks
6. the custom dpi settings in the display menu doesn't work properly (either its too big, or its very small, the mid point doesnt change anything at all)
7. the screen off gestures and fingerprint gestures aren't working
8. night mode and reading modes doesn't work
9. google contacts sync has some problems. doesn't seem to sync completely
10. the hot spot fails for the first time, but then after works fine
apart from these, im not gonna comment on battery life, smoothness and heat isues of the rom as it still is in alpha
but im happy to say that the dev made a significant improvement, because the battery life and smoothness are very much better than the test builds
as for the heat issue , the cooling solution like suncooling will work for the most of the part
these are just listing out what works and what not, and is no way an offence to the dev and his efforts, thanks @devabhi for the excellent port,
overall, pretty solid build for an alpha
checkout screenshots
Installed as instructed but still device burn like hell and there are bug as post say alpa so not that I can complain just sad that facelock not working
---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------
thilak devraj said:
oxygen os beta 11 review
so, everything basic is working. :good:
no problem in phone calls, data connectivity,
a lot more better in heat and battery management when compared to the older test builds
volte working
double tap to wake is working
three finger gesture working
navigation gestures working
some bugs (including the bugs stated in the op)
1. wi-fi problems as stated
2. stock camera as stated (gcam works perfectly)
3. brightness bug hasn't been solved yet, even after flashing the provided patch .. (lowest point will turn off the display)
4. screen wake up time is a little slow. (makes us think that fingerprint is slower, but its not)
5. as stated , face unlock registers the face but doesn't unlocks
6. the custom dpi settings in the display menu doesn't work properly (either its too big, or its very small, the mid point doesnt change anything at all)
7. the screen off gestures and fingerprint gestures aren't working
8. night mode and reading modes doesn't work
9. google contacts sync has some problems. doesn't seem to sync completely
10. the hot spot fails for the first time, but then after works fine
apart from these, im not gonna comment on battery life, smoothness and heat isues of the rom as it still is in alpha
but im happy to say that the dev made a significant improvement, because the battery life and smoothness are very much better than the test builds
as for the heat issue , the cooling solution like suncooling will work for the most of the part
these are just listing out what works and what not, and is no way an offence to the dev and his efforts, thanks @devabhi for the excellent port,
overall, pretty solid build for an alpha
checkout screenshots
Click to expand...
Click to collapse
Same from me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally MIUI arrived for Moto X Play after a lot of time and effort. This Miui 8 Global version is based on a a Miui port for Moto G3 turbo from user Innfinite4evr.
Disclaimer: This is a port, there may be many bugs since it is not an official support of Xiaomi. Im not responsible for any damage to your device or your information.
What we find in miui?
- Second space
- Cloned Apps
- MIUI 8 Gallery, Wallpaper Carousel, Scanner, Calculator, Notes and many more.
- Snap camera and moto gestures(camera and chopchop for torch)
What is working?
All.. if you find a potential bug tell me..
BUGS
The quick ball works but cannot be customized..
The sim card doesn't show on status bar but it works (to fix it just tap power button twice)
Rgb sliders from live display. Try a similar app from playstore.
INSTALLATION
You need the bootloader unlocked and a custom recovery(twrp)
1 - Place rom in your external sd card
2 - Reboot to recovery
3- Wipe Data, Dalvik cache, Cache and System.
4 - Go to mount and unmount system
5- Flash Rom zip file
6- Reboot and have fun!
DOWNLOAD
Miui 8v1
Miui 8v2
DON'T FLASH GAPPS, ALREADY INCLUDED
DON'T FLASH ANOTHER KERNEL, THEY DONT SUPPORT MIUI
Changelog
V1 - 17 - 08 -18:
-Initial build
V2 - 22 - 08 -18:
-Fix battery drain and stability bugs(NOT FRAMEWORKS BUGS)
THANKS
- Innfinite4evr for the port
- Squid2 for help with the camera bug and for cm13
IF YOU WANT TO APPRECIATE MY WORK AND TIME
http://paypal.me/nicomg96
XDA:DevDB Information
[ROM] [6.0.1] MIUI 8 Global - Port, ROM for the Moto X Play
Contributors
NicoMG
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2018-08-22
Beta Release Date: 2018-08-18
Created 2018-08-18
Last Updated 2018-10-05
First
Second
Thanks
Is the battery drain completely corrected after the use of the app? Or is it still worse than most roms?
Shepxda said:
Is the battery drain completely corrected after the use of the app? Or is it still worse than most roms?
Click to expand...
Click to collapse
The app is like a shortcut for hidden options.. If you dont optimized those apps maybe will get 2 hours of sot but if you do that you will get around 4 or 5 hours of sot..
This rom looks amazing and I don't face any battery drain issues. I am facing issues with the color correction in live display . When I slide the bar it goes directly to 10% and doesn't allow to change the values for all RGB. Can you please tell me a quick fix for this??
ssuurryyaa101 said:
This rom looks amazing and I don't face any battery drain issues. I am facing issues with the color correction in live display . When I slide the bar it goes directly to 10% and doesn't allow to change the values for all RGB. Can you please tell me a quick fix for this??
Click to expand...
Click to collapse
This works fine with kernel adiutor so is problem of live display
NicoMG said:
This works fine with kernel adiutor so is problem of live display
Click to expand...
Click to collapse
Kernal auditor doesn't seem to work properly, like the RGB values changes automatically. I have to manually execute the profile that I created for RGB everytime ,like every hour.
ssuurryyaa101 said:
Kernal auditor doesn't seem to work properly, like the RGB values changes automatically. I have to manually execute the profile that I created for RGB everytime ,like every hour.
Click to expand...
Click to collapse
Im trying to fix but I dont know if it is problem of cm13 or miui. Btw its a port of a port.. some things maybe has problems and I dont have all the knowledge to fix it and in playstore are apps that do the same
Wifi not showing.. Settings crashed everytime.. Any resolution?
manish.kumar86 said:
Wifi not showing.. Settings crashed everytime.. Any resolution?
Click to expand...
Click to collapse
No problem with that. Did you wipe cache, dalvik, data and system before install?
yes.. formatted each partition except internal.. tried twice..same issue..
Update!
V2 - 22 - 08 -18:
-Fix battery drain and stability bugs(NOT FRAMEWORKS BUGS)
https://www.androidfilehost.com/?fid=1322778262903987021
NicoMG said:
Update!
V2 - 22 - 08 -18:
-Fix battery drain and stability bugs(NOT FRAMEWORKS BUGS)
https://www.androidfilehost.com/?fid=1322778262903987021
Click to expand...
Click to collapse
Does it supports VOLTE?
nainesh.vanza said:
Does it supports VOLTE?
Click to expand...
Click to collapse
Yes it does
Can't i root with Magisk..
---------- Post added at 03:28 PM ---------- Previous post was at 03:28 PM ----------
Can i root with Magisk
ayepandey said:
Can't i root with Magisk..
---------- Post added at 03:28 PM ---------- Previous post was at 03:28 PM ----------
Can i root with Magisk
Click to expand...
Click to collapse
try with magisk zip installer
sd card
the rom is awesom.
but I cant use a sd card.
how can i fix it?!any tips
thanks.
king123454321 said:
the rom is awesom.
but I cant use a sd card.
how can i fix it?!any tips
thanks.
Click to expand...
Click to collapse
I see my sd card and move files with root explorers. Try MiXplorer
What is this ?
It's OnePlus 5T Oxygen Os OB22 port for Asus Zenfone Max Pro M1 from OnePlus5T by Guzram. This is the Pie version of Oxygen os rom available. This port brings all the software feature of oxygen os except for those required hardware such as nfc, etc.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom port, it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
WARNING2:
MAYBE FULL OF BUGS. DONT FLASH IF YOU ARE AFRAID OF THEM.
Bugs :# AOD (Always on Display)
# Idle Drains
# Camera works after reboot wait for 5 mins
# If any major bugs found Report with logs.
# Dont report for minor bugs.
Instructions:# Download & Extract the given zip.
# Place the the folder inside TWRP Backup Folder.
# WIPE Dalvik/Art Cache, Cache, System, Data, Vendor.
# Restore System, Vendor & Boot
# Flash Magisk
NOTE:# OnePlus Camera is Half Broken Use Gcam
# Reboot to System, Recovery, Bootloader is Broken, use Hardware keys to Navigate.
# Headset broken (need Magisk Module to work included in zip)
#If You have Flashed Magisk after restoring it might not boot, so do force reboot if it hasnt booted.
# The Latest File is with The Latest Superior Os Vendor thanks to @LordShenron
Download Link:Latest OnePlus 5T Oxygen Os Port OB22 Source Forge
Android File Host
For More Updates and Bug Fixes Join Telegram Channel & Group
Telegram Channel
Telegram Group
Credits:A Big Thanks To Guzram To make Rom Stable and lit Telegram Channel for Guzram Ports : Guzram ChannelThanks To
@VivekBhagat :- For Fixing Audio For Our Device.
@SagarMakhar :- For SGSI Fix
@FRANKY :- Merged All Patches and Dsied for X00TD
@guzram :- porter, researcher, merged all into better patch
@fxsheep :- amazing guide, patch template
@erfanoabdi :- P related stuff
@1+ :- the ROM maker
XDA:DevDB Information
[ROM][9.0][X00TD] Oxygen Os [OOS], ROM for the Asus ZenFone Max Pro M1
Contributors
Gautham Asir, VivekBhagat, teztaz--v3
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Oxygen Os
Version Information
Status: Stable
Created 2018-12-20
Last Updated 2019-01-03
Since you mention that bugs why you tag stable ? mind blowing
Here some ss
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ASUS_X00TDA using Tapatalk
Junnie said:
Since you mention that bugs why you tag stable ? mind blowing
Click to expand...
Click to collapse
Because bugs that are mentioned are minor and sgsi even its working fine is a big works also don't want use it or want a fully stable Rom. why wasting time on sgsi you have other ROM go try them
Sent from my ASUS_X00TDA using Tapatalk
..
Junnie said:
Since you mention that bugs why you tag stable ? mind blowing
Click to expand...
Click to collapse
Ide drain is not there .. use 2018-12-16 build without changing kernel
in latest build we havnt test the IDE drain .
2018-12-16 ( based on PE official vendor)
2018-12-20 ( based ons superior Os offical vendor/ FP is fast there)
"Bootloader broken " what is this? I don't know anything about this?
Franky001 said:
Ide drain is not there .. use 2018-12-16 build without changing kernel
in latest build we havnt test the IDE drain .
2018-12-16 ( based on PE official vendor)
2018-12-20 ( based ons superior Os offical vendor/ FP is fast there)
Click to expand...
Click to collapse
thanks for the confirmation mate , you should post on your changelog :highfive:
1) So should I expect it to be as snappy and smooth with all good features that oxygen os offers?
2) And any plans to update it regularly... Or even once in a while?
Cause before this we also asked for a Miui 9/10 Port....we got it..but terrible when it came to updates...yeah surely Dev's been busy with Pie and is doing awesome there....but maintaining it a thing....
Anyways...
Thanks for this one...
Great job
Will wait for your response for those 2 questions
Peace
[email protected] said:
1) So should I expect it to be as snappy and smooth with all good features that oxygen os offers?
2) And any plans to update it regularly... Or even once in a while?
Cause before this we also asked for a Miui 9/10 Port....we got it..but terrible when it came to updates...yeah surely Dev's been busy with Pie and is doing awesome there....but maintaining it a thing....
Anyways...
Thanks for this one...
Great job
Will wait for your response for those 2 questions
Peace
Click to expand...
Click to collapse
1. Yes
2.hmmm not fixed if guzram update sgsi will surely do it because he is main developer you can say we used his sgsi that only boots on whyred and x00td
Can someone please tell me how flash this os?
VivekBhagat said:
Here some ssView attachment 4669416View attachment 4669417View attachment 4669418View attachment 4669419View attachment 4669420
Sent from my ASUS_X00TDA using Tapatalk
Click to expand...
Click to collapse
How did you enable pie navigation bar?
How to flash google apps?
sushil11 said:
How did you enable pie navigation bar?
How to flash google apps?
Click to expand...
Click to collapse
Setting/button & gestures/buttons
For gapps use app store that comes in rom search play store install it
VivekBhagat said:
Setting/button & gestures/buttons
For gapps use app store that comes in rom search play store install it
Click to expand...
Click to collapse
Sir Can u tell me the steps to flash this?
Extract zip file and place it under twrp folder ,mount system ,vendor and then restore
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
Anyone how to make market app in English.system is in English but market app is in Chinese
---------- Post added at 03:49 PM ---------- Previous post was at 03:47 PM ----------
Rom is smooth and has some minor bugs .
Is headset working? I mean earphones
I can setup faceunlock but it doesnt unlock ...any fix for that?
Ya it works after flashing headset fix from magisk
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
Noticed some lag ,when using browser ,using keyboard.other than that ROM is very very smooth.bootloader is to be fixed as restarting will not work.
---------- Post added at 04:16 PM ---------- Previous post was at 04:14 PM ----------
Audio tuner crashes
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
Camera crashes,but it works 1 in 5 times
rampittu007 said:
Sir Can u tell me the steps to flash this?
Click to expand...
Click to collapse
Steps are given in op sir
VivekBhagat said:
Steps are given in op sir
Click to expand...
Click to collapse
Frankly speaking i don't understand that! Still confused! Sry fr that? would you mind if u can tell in a better view?!
rampittu007 said:
Frankly speaking i don't understand that! Still confused! Sry fr that? would you mind if u can tell in a better view?!
Click to expand...
Click to collapse
# Download & Extract the given zip.
(you should understand this...)
# Place the the folder inside TWRP Backup Folder.
(you have to place the extracted folder in the TWRP folder where the backups are stored if you backup any rom in twrp)
# WIPE Dalvik/Art Cache, Cache, System, Data, Vendor.
(go to twrp, then wipe those options.)
# Restore System, Vendor & Boot.
(Go to Restore and do those....)
# Flash Magisk
(You know this)
Download
RR-P-v7.0.0-20190124-honami-Unofficial
RR-P-v7.0.0-20190217-honami-Unofficial
RR-P-v7.0.0-20190304-honami-Unofficial
RR-P-v7.0.1-20190314-honami-Unofficial
RR-P-v7.0.1-20190412-honami-Unofficial
RR-P-v7.0.2-20190810-honami-Unofficial
Xperia Camera
TWRP 3.2.x-0
Magisk
Modem for C6902 NEED TEST, FIRST MAKE A BACKUP
GAPPS arm/9.0
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP-3.2.x-0_Honami.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install Gapps
7. Install XREN-kernel (optional)
8. Install SuperSU or Magisk
9. Done!
Local manifest - how to build...
XDA:DevDB Information
Resurrection Remix 7.0.0 for Honami, ROM for the Sony Xperia Z1
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Beta Release Date: 2019-01-24
Created 2019-01-24
Last Updated 2019-08-11
Changelogs
24.01.2019
-initial release
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
04.03.2019
- Update from source
14.03.2019
- Update from source
- Change to Carbon source for device (test it)
12.04.2019
- Update from source
- Switch to XREN kernel
- Fixed problems with 5 GHz WIFI channels (Thank's SpiritCroc and 115ek)
- added aptX/aptXHD (Thank's SpiritCroc and 115ek)
11.08.2019
- Update from source
- Update power profile
- more features
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
raschad said:
View attachment 4692564 View attachment 4692565 View attachment 4692566 View attachment 4692567 View attachment 4692568
Click to expand...
Click to collapse
Thanks a lot Bro i was waiting for this soo long
Is this microg supported?
Where can i find the boot.img?
Review
Used for a day pretty stable for initial release but sometimes lags a lot
also flashed XREN kernel
some bugs i found on daily usage
1= camera doesn't work for me
2= lockscreen freezes if i turn off screen and then screen on within 5-6 seconds after on i have to wait in screen off then wakeup after some time
3= some features of rom aren't working e.g. customization also many features of previous roms aren't available
any way thanks for your work for porting such a beautiful rom for us
i was also waiting for your RR Oreo update
that was really awesome rom also with some bugs but a lot of customization :good:
@raschad big trouble with pie stearing i test it and device go to bootloop in Recovery i must completed new flash the rom sry my english is terible
Sent from my [device_name] using XDA-Developers Legacy app
When use pie stearing button in quick settings bar
@raschad big trouble with pie stearing i test it and device go to bootloop in Recovery i must completed new flash the rom sry my english is terible
Sent from my [device_name] using XDA-Developers Legacy app
When use pie stearing button in quick settings bar
Is anyone out here who can bring this nice rom to the Xperia Z2?
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
Is it stable enough to install it for someone else. Phone is currently on lineage 14 and incall echo is there a problem. Also the speakers don't get loud and distord very quickly. I'm thinking about problems like gps issues, heat or battery problems.
Thanks in advance if anyone can give me some information.
RR is the best rom for our device
i will download and try it
thank you raschad
moh kotb said:
RR is the best rom for our device
i will download and try it
thank you raschad
Click to expand...
Click to collapse
As far as i know yes,and it's the only one out there with too much cutomization, but i tried the RR Pie Rom for now and found some lags and bugs, anyway i will tag My LogCat file to Mr raschad Dev to take a look.
My respect Mr raschad, many thanks for your great work and effort, i tried your RR pie Rom with Rz Kernel for a time and found the some lags and bugs like, First is lockscreen lag and freeze till restarting phone, and there is some of configurations and settings does not applied i'am not sure if this caused from Rz kerel and didn't tried without it, anyway thanks a lot and please this is My LogCat file to check in.
Thank you MR Raschad for thise rom
i try it and its realy Fantastic
but when i use xern kernel, system reboat & reboat ( the same thing with aicp pi rom )
when i using rz kernel , camera is very bad
when installing rom without custom kernel , touch screen is lag , incoming call maybe failed , some feature not work as quick setting in rom customization
what about gps .. it work with me but not fixed whit any satalite...
we waiting next update... thank you.
Is there someone who uses this as a daily driver? Have a spare Z1 and want to use this ROM so my GF can use this phone.
Rubenos said:
Is there someone who uses this as a daily driver? Have a spare Z1 and want to use this ROM so my GF can use this phone.
Click to expand...
Click to collapse
yeaj its pretty stable but some lags
for use as daily driver try RR N official built for stability
Dison Reigns said:
yeaj its pretty stable but some lags
for use as daily driver try RR N official built for stability
Click to expand...
Click to collapse
All Pie roms for this phone have been slow imo, Oreo is very smooth and stable for me though.
Chocolatetrain said:
All Pie roms for this phone have been slow imo, Oreo is very smooth and stable for me though.
Click to expand...
Click to collapse
eah bro oreo was smooth but not stable as compared to nougat
try and see the difference
---------- Post added at 07:42 AM ---------- Previous post was at 07:38 AM ----------
and bonus point is i also flashed a moded sony camera by raschad and i got manual controls and higher fps videos on nougat but not oreo or pie
i don't know why but on resurrection remix nougat its working same as cyberian camera o even better because front camera also working thats was missing in cyberian
thats my opinion
try yourself
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi 8 [Dipper]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
You tell me
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked our work? Give us a beer
jhenrique09 paypal
Hlcpereira paypal
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r41
Security patch level: September 2020
Build author/Device Maintainer: Hlcpereira, GiaSen
Kernel Source: https://github.com/PixelExperience-Devices/kernel_xiaomi_polaris
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Reserved #1
Reserved #2
You'll need the TWRP unofficial by @mauronofrio due encryption. It'll may be needed to flash DM-Verity if you're not encrypted. Build is going to be up soon
So Fast. Thanks a lot.
Btw I guess we can't downgrade to Pie if we flash this version. Am I Correct?
Hlcpereira said:
You'll need the TWRP unofficial by @mauronofrio due encryption. It'll may be needed to flash DM-Verity if you're not encrypted. Build is going to be up soon
Click to expand...
Click to collapse
Version 3.1.1-1 or -2 ? (i'm asking 'cause with the other rom with android 10, the -2 version of twrp gives an error)
---------- Post added at 16:06 ---------- Previous post was at 16:04 ----------
amirkrs said:
So Fast. Thanks a lot.
Btw I guess we can't downgrade to Pie if we flash this version. Am I Correct?
Click to expand...
Click to collapse
i downgraded and had no issues.
Normal steps (wipe cache, system, data and install the 9 rom)
Thank you for your great work.
Does it have IR face unlock, even knowing that google removed from Q's ?
Thanks for the effort! Gonna try when I get home!
amirkrs said:
So Fast. Thanks a lot.
Btw I guess we can't downgrade to Pie if we flash this version. Am I Correct?
Click to expand...
Click to collapse
I had to downgrade to Pie after because of the September pie updates. Just switched to the Official TWRP because of the changes made to TWRP to work with Android 10 encryption.
Can I use Magisk for root?
W3ND31 said:
Version 3.1.1-1 or -2 ? (i'm asking 'cause with the other rom with android 10, the -2 version of twrp gives an error)
---------- Post added at 16:06 ---------- Previous post was at 16:04 ----------
i downgraded and had no issues.
Normal steps (wipe cache, system, data and install the 9 rom)
Click to expand...
Click to collapse
So What about ARB? Cause Im Really worried about this. I had a terrible time when my phone went into xiaomi recovery and kept it self locked
amirkrs said:
So What about ARB? Cause Im Really worried about this. I had a terrible time when my phone went into xiaomi recovery and kept it self locked
Click to expand...
Click to collapse
Mi 8 has ARB permissive, so don't worry about that.
So I shouldn't even try this ROM with official twrp? Only recommended one?
Marian166 said:
Can I use Magisk for root?
Click to expand...
Click to collapse
No
mar.ur said:
No
Click to expand...
Click to collapse
How to root
Hlcpereira said:
Mi 8 has ARB permissive, so don't worry about that.
Click to expand...
Click to collapse
Installed and runs fine for now!! Google pay doesn’t wokr out of the box and bluetooth crashed repeatedly on my phone until I rebooted.. will further investigate
Fast and great work!
Several issues to report:
1) There is one or more app keeping on start automatically and error exit, a system dialog pops up briefly and disappear quickly. It may interrupt the other app. Any where to manage the auto start apps?
2) After first time bootup, swap close the apps won't work. After reboot, it works.
This is the finding so far.
Environment: Dipper dirty flash from Pie Plus 14/9 version, and also DM-Verity ZIP.
---------- Post added at 11:40 PM ---------- Previous post was at 11:14 PM ----------
Further issue discovered:
First call in to mobile: incoming call appear several times then disappear, vibrate works, and recent call history is empty.
Second call into mobile: no incoming call appear, vibrate works, and recent call history is empty.
Series issues now: Can't make outgoing call.
Grabbed a phone number from website, click it, it goes of phone UI with the correct number, press phone icon to dial, no outgoing call made...
Marian166 said:
How to root
Click to expand...
Click to collapse
you need to flash kernel which already patched with su. however it will grant root access to all app and no manager so you can't hide it
Netvetra said:
Fast and great work!
Several issues to report:
1) There is one or more app keeping on start automatically and error exit, a system dialog pops up briefly and disappear quickly. It may interrupt the other app. Any where to manage the auto start apps?
2) After first time bootup, swap close the apps won't work. After reboot, it works.
This is the finding so far.
Environment: Dipper dirty flash from Pie Plus 14/9 version, and also DM-Verity ZIP.
---------- Post added at 11:40 PM ---------- Previous post was at 11:14 PM ----------
Further issue discovered:
First call in to mobile: incoming call appear several times then disappear, vibrate works, and recent call history is empty.
Second call into mobile: no incoming call appear, vibrate works, and recent call history is empty.
Click to expand...
Click to collapse
Netvetra said:
Series issues now: Can't make outgoing call.
Grabbed a phone number from website, click it, it goes of phone UI with the correct number, press phone icon to dial, no outgoing call made...
Click to expand...
Click to collapse
you dirty flash from Pie to 10, of course you will face lot of bugs. try clean flash and if the problem still existed, you can report it
you dirty flash from Pie to 10, of course you will face lot of bugs. try clean flash and if the problem still existed, you can report it[/QUOTE]
Oh, my fault. Didn't realise it's an major upgrade.
Will downgrade first and come back.