{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR P10 LITE OREO
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Made with the codes released from Huawei. Flashing from recovery twrp from oreo.
this modified kernel is fully compatible with huawei P8lite 2017, P10 lite, P20 Lite, Mate 10 lite, Honor 7x and Honor 9 lite.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Download the ZIP
Save in external memory.
Flash through TWRP.
return to the main panel.
clean (only one cache).
turn off the phone for a minute and turn on
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
HONOR 7X----------link
HONOR 9L----------link
P8 LITE-----------link
P10 LITE----------link
P20 LITE----------link
MATE 10 LITE------link
do not copy this module, you can publish in other modified kernel with the respective credits
KERNEL 5.6 link
KERNEL 5.0 link
KERNEL 2.1 (P20Lite) link
KERNEL 2.1 link
KERNEL 2.0 link
KERNEL 1.8 link
XDAevDB Information
MorfuZ, Kernel for the Huawei HI6250.
Credits
- ajituchiha. (commits)
- Dil3mm4
- osm0sis/AnyKernel2
- Alexxx1 P10L
- Chisetdel31260 M10L
- Emrullah bingul P8L
- Valerio Gerva H7X
- Giacomo Fazio P20L
Contributors
Catuva21
Source Code: https://github.com/catuva21/hi6250-emui8.x
Version Information
Status: Stable
Created 2018-06-02
Last Updated 2018-10-11
DESCRIPTION MORFUZ KERNEL-EMUI 8This core aims at the optimal performance to battery ratio in mid-range terminals, Kirin 65X processor
KERNEL 5.6
Governor BIOSHOCK and DARKNESS back
Planner sio, sioplus and tripndroid back
Added other configurations that Morfuz Kernel 2.1 had
New governors CPUFreq dancedance intellicative.
KMS update
Optimization of blu_active governor for kirin
Other necessary modifications.
KERNEL 5.0
configurations since the beginning of the source codes of Huawei, some changes of the Kernel 2.1 morph
Upstream to the latest version of the kernel v4.4.129
Compiled with the latest Linaro tool 4.9.
EAS has been fully applied.
Conscious energy planning support
new governor governor Schedutil
ExFat has been updated
Frandom support
CPU optimizations and energy use.
IO optimizations
Selinux Permessive now without magisk module
O3 optimizations
Huawei specific optimizations
Uses a timer frequency of 300 HZ
Wireguard support.
Removed spam from unwanted registration
Enabled Advance TCP congestion algorithms
Westwood is used as the default TCP algorithm
Many changes to improve performance.
KERNEL 2.1:
Compiled with the latest Linaro tool chain 4.9
Changed kernel code sources
Selinux Permissive
corrected the MMC - USSD
KERNEL 2.0:
Compiled with the latest Linaro tool chain 4.9
Added fsync support on-off
energy saving.
governor improvements by default
updated boeffla_blocker ver 1.1.0
Advanced TCP
disabled check root
added cpu_boost
GPU get aware
power quickwakeup
KERNEL 1.8:
Added Governador Blu_Active
Added Governador Impulse
Added Governor Darknnes
Added Governor Bioshock
Added I/O scheduler: Sio
Added I/O scheduler: Sio Plus
Added I/O planner: Zen
Added I/O planner: Tripndroid
LZ4 compression
Compiled with the latest Linaro tool chain 4.9
Selinux Permessive
Wireguard support
R2
Hey very interesting thanks for this kernel I have a question: Does this kernel allow to pass safetynet with an unlocked bootloader and without magisk? Thank you in advance.
Also with this kernel i can't underclock cpu to Save battery
kaiomatico said:
Hey very interesting thanks for this kernel I have a question: Does this kernel allow to pass safetynet with an unlocked bootloader and without magisk? Thank you in advance.
Click to expand...
Click to collapse
should pass safetynet if you do not have root
Thank you.
Any tips how to raise gpu performance?
Or in general, what options to use in kernel adiator?
Does it contain usb otg patches for charging?
CATUVA21 said:
should pass safetynet if you do not have root
Click to expand...
Click to collapse
Hey I just tried lineageos 15 without root but WITH an unlocked bootloader and your kernel and it passes safetynet and works with pokemon go without magisk just fine, so thank you a thousand times for this awesome kernel! It is simply the best thing that could happen for the honor 9 lite, thanks :victory:
I flash this kernel and is working on p smart too
kaiomatico said:
Hey I just tried lineageos 15 without root but WITH an unlocked bootloader and your kernel and it passes safetynet and works with pokemon go without magisk just fine, so thank you a thousand times for this awesome kernel! It is simply the best thing that could happen for the honor 9 lite, thanks :victory:
Click to expand...
Click to collapse
thanks for activating threads @Darth
links
Wow that awesome performance. The best :good::good
With lld-l31 wifi don't work. There's a way to solve this problem?
honor 9 lite
does lineage os 15.1 support volte
Can I just flash the stock KERNEL with fastboot if I want to revert to stock KERNEL?
Thread reopened. Update the sources link in OP.
You are good to go.
@CATUVA21
-XDA Staff.
Final work
Did anyone tested on Android Pie, Honor 9,is it working well?
CATUVA21 said:
FOR P10 LITE OREO
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Made with the codes released from Huawei. Flashing from recovery twrp from oreo.
this modified kernel is fully compatible with huawei P8lite 2017, P10 lite, P20 Lite, Mate 10 lite, Honor 7x and Honor 9 lite.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Download the ZIP
Save in external memory.
Flash through TWRP.
return to the main panel.
clean (only one cache).
turn off the phone for a minute and turn on
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
HONOR 7X----------link
HONOR 9L----------link
P8 LITE-----------link
P10 LITE----------link
P20 LITE----------link
MATE 10 LITE------link
do not copy this module, you can publish in other modified kernel with the respective credits
KERNEL 5.6 link
KERNEL 5.0 link
KERNEL 2.1 (P20Lite) link
KERNEL 2.1 link
KERNEL 2.0 link
KERNEL 1.8 link
XDAevDB Information
MorfuZ, Kernel for the Huawei HI6250.
Credits
- ajituchiha. (commits)
- Dil3mm4
- osm0sis/AnyKernel2
- Alexxx1 P10L
- Chisetdel31260 M10L
- Emrullah bingul P8L
- Valerio Gerva H7X
- Giacomo Fazio P20L
Contributors
Catuva21
Source Code: https://github.com/catuva21/hi6250-emui8.x
Version Information
Status: Stable
Created 2018-06-02
Last Updated 2018-10-11
Click to expand...
Click to collapse
Nice
Include Honor 6x
Related
Hello everyone. After some time for building Roms and kernels for the OnePlus One, now I am here for the OnePlus 5.
Some of you already know me for what I focus on my builds.
Functionality
Speed
Smoothness
Battery
Features:
Compiled by a custom toolchain from Google to ensure the best experience.
Schedulers available:
SIO
BFQ
ZEN
CFQ - Default
Deadline
NOOP
MAPLE
Extra TCP advanced algorithm:
Westwood - set as default
Reno
Cubic
Highspeed
HTCP
Vegas
Veno
lp
illinois
yeah
Sound Control - Sound and Microphone control
KCAL - Control colours on your display
Adreno Idler - (Battery saver without compromising performance)
Notification LED control
Sweep2sleep
To control features use kernel adiutor.
Patches from Google Kernel for 4.4 devices
Latest CAF patches LA.UM.6.4.r1-07600-8x98.0
Latest Linux patches 4.4.126
Optimized libraries
Crypto patches
Wakelock blocker to reduce battery drain due to the modules (does not affect functionality)
Upstream code for F2FS
Using noatime
Patches to improve battery life
Passes Safetynet
WireGuard
Upstream code android binder
Screen flickering fixes
Version to use:
2.xx-O - Oreo 8.1 - Recommended to use OB6
1.xx-O - Oreo 8.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download New Kernel
There are two branches:
Stable - which has all proven and tested development
Beta - new features introductions. Remember if your chip fries... It was done with good intentions, intended only for brave people.
To build this kernel I give a huge thank you to great dev @savoca has had a lot of patience and shared his knowledge to build a kernel with a step by step guide, as also explaining how each stuff works.
@andi79 for the introduction of the 64bit model kernel compilation.
All credits go to the OnePlus team.
Disclaimer: With the use of this kernel I am not responsible for any damage to the phone. It is at your own risk in case happens something wrong. I use this kernel daily and test it before release.
Source code
XDA:DevDB Information
[KERNEL]New Kernel for the OnePlus 5
Contributors
jgcaap
ROM OS Version: 8.0.0 oreo/8.1.0 oreo
Version Information
Status: Stable
Created 2017-12-10
Last Updated 2018-03-23
XDA:DevDB Information
New Kernel, Kernel for the OnePlus 5
Contributors
jgcaap
Source Code: [url]https://github.com/NewRom/android_kernel_oneplus_msm8998[/URL]
Kernel Special Features:
Version Information
Status: Stable
Created 2018-04-01
Last Updated 2018-04-01
Instructions:
1) If you come from another kernel (which is not stock) flash the boot.img of the stock version.
2) Flash the zip file.
Changelog:
v2.05-O
Updated toolchain compilation environment
v2.04-O
SELinux: removed switch option.
updated to Linux 4.4.125
adjusted swap kernel to 10%. It will be very hard to use this.
Added patches from Google related to
Merged new Oneplus patches
Upgraded to wifi LA.UM.6.4.r1-07400-8x98.0
ensure the kernel is compiled for LP64
Added patch to prevent regressions in the compressed kernel image.
Removed some debug options and unnecessary features.
v.2.03-O
Merged LA.UM.6.4.r1-07400-8x98.0
v.2.02-O
Merged linux v4.4.123 patches
v.2.01-O
Reverted some of the code from the last rebase.
v2.00-O
Rebase kernel from oneplus 8.1 sources.
There was added alot of patches for cfq.
Removed some schedulers.
Added wireguard.
Applied changed which use less cpu.
Added display options to provide power savings.
Added display dimmer option.
Added kcal back.
Removed fifo, so, vr schedulers.
v.1.29-O
Rebased current kernel commits as it is with 8.1 sources.
v.1.28-O
More upstream fixes by Google.
v.1.27-O
Screen flickering fixes (was finding this really annoying)
CPU jumping randomly fixed ( more battery)
Upstream code for android binder with loads of fixes from Google
v.1.26-O
Merged CAF patches LA.UM.6.4.r1-06900-8x98.0
v.1.25-O
Merged Linux patches 4.4.120
v.1.24-O
Merged Linux patches 4.4.119
v.1.23-O
Synced with Oneplus changes.
v.1.22-O
Added wireguard back.
v.1.21-O
Merged Linux patches 4.4.118.
Disabled wireguard
v.1.20-O
Merged Linux patches 4.4.117.
v.1.19-O
Updated toolchain
v.1.18-O
Rebased and merged Linux patches 4.4.116.
Ext4 fixes
CPU interactive fixes
Merge tag 'LA.UM.6.4.r1-06500-8x98.0'
Changed some configurations for WiFi.
Lowered min frequency to 300mhz (less heat).
v.1.17-O
Merged Linux patches 4.4.115.
v1.16-O
Merged Linux patches 4.4.114.
v1.15-O
Synced with new oreo beta
Added cpu patch
Added crypto
v1.14-O
Merged Linux. Patches 4.4.113
Updated WiFi from caf drivers
Merge caf LA.UM.6.4.r1-06100-8x98.0
v1.13-O
Compiled with custom toolchain
v1.12-O
Merged Linux patches 4.4.112
v1.11-O
Synced with beta 2 for op5t
v1.10-O
Added Linux patches until 4.4.111
Disabled some debug
Changed binary Wi-Fi to a custom one built by caf
Compiled with google toolchain
Troubleshooting :
No wifi or broken hotspot.
Solution: You probably come from another kernel, please reflash rom, then flash kernel.
Battery drain:
This rom has a bug in the wifi. Please go to advanced settings and turn off scanning always available.
On status appears kernel 4.4.21
Since there is a requirement to the kernel say that is version 4.4.21-perf+ for wifi to work then I named the kernel 4.4.21-perf+. This until I check wifi driver source.
Thanks for making the dedicated thread
Veliion said:
Thanks for making the dedicated thread
Click to expand...
Click to collapse
Welcome, and enjoy.
I'm on OOS 5.0.4 which is on android version 8.0.0. Is newKernel-OOS-1.29-O.zip the latest version that i should use? Or some other. Please help
wow. new kernel . gonna try .
sleepwalking0593 said:
I'm on OOS 5.0.4 which is on android version 8.0.0. Is newKernel-OOS-1.29-O.zip the latest version that i should use? Or some other. Please help
Click to expand...
Click to collapse
Correct.
Can you add tripndroid and Alucard?
Download and ready to flash. Thx for your work.
Thanks for op5 thread
Does it support for RR?
Glad to see you in op5 forum, I'm following you since the good old bacon times
h.castle said:
Does it support for RR?
Click to expand...
Click to collapse
Only on OOS ROMs. It doesn't support custom ROMs currently
New kernel online with latest Linux patches 4.4.127
I have installed this version newKernel-OOS-2.07-O.zip on open beta 8 on my Oneplus 5 but during flash it shows oneplus 5t .Is it good to go or i should wipe my phone ???
Aarju said:
I have installed this version newKernel-OOS-2.07-O.zip on open beta 8 on my Oneplus 5 but during flash it shows oneplus 5t .Is it good to go or i should wipe my phone ???
Click to expand...
Click to collapse
It is fine.. Just a message kernel are unified.
jgcaap said:
It is fine.. Just a message kernel are unified.
Click to expand...
Click to collapse
Thanks developer
2.07 work veey well. Thx dev.
How to update kernel??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Oxygen Kernel is based on stock Samsung source code taken from Samsung Opensource Release Center with sole aim to provide better performance, stablity and battery backup than stock kernel. A kernel tells the hardware in your Android device how to behave, kind of like your mommy tells you how to behave. You can modify how fast your processor runs by over or under clocking it or optimize your system for battery life.
Oxygen Kernel is always up-to-date with latest patches from kernel.org
Known for maximum stability and smooth performance
All the Source Code is available on github
Kernel Info
LINUX: 3.18.132
SAFETYNET: Green
SELINUX: Permissive
TOOLCHAIN: Google's GCC 4.9
Compatible ROMS
All Touchwiz 8.0 and 8.1 ROMs
All AOSP 8.1 and 9 ROMs
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version
Full -Ofast build with graphite optimisations
Removed a lot of useless debug and logging options
Disabled TIMA, KNOX, DM-VERITY,etc
Awesome battery life and smooth performance
ARM enhanced performance patches
Overclock CPU up-to 1.7GHz and GPU up-to 1146MHz
GPU Voltage Control
CPU Governors: conservative, interactive, ondemand, performance, powersave, userspace (default: interactive)
I/O Schedulers: bfq, cfq, deadline, maple, noop (default: maple)
Powersuspend and State Notifier drivers
Dynamic FSync, FS fsync toggle on/off
Frandom driver for 10-50x faster random number generation
Spectrum Support (a simple, profile based kernel manager || now integrated into Oxygen Control)
Disabled CRCs by default for 30% performance boost
CDROM emulation on mass_storage (compatible with DriveDroid)
Wireguard support
Boeffla Wakelock Blocker
Oxygen Control App Features
Full CPU and GPU Control
Boeffla Wakelock Blocker
Spectrum Support
Samsung Hotplug
CRC Control
And many more!
These features are only available through Oxygen Control App
Download Oxygen Control from Github Releases
Warning: If you come from some other custom kernel or have any issues, you should dirty flash your ROM before flashing Oxygen Kernel to avoid problems.
Reflash ROM -> Flash Oxygen Kernel --> Flash Magisk if you want to root
If you are upgrading between Oxygen Kernel versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Going back to stock: You can backup your boot.img with TWRP before flashing Oxygen Kernel and restore the backup whenever you want to revert.
This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock tw rom
Downloads
Kernel
Download
Oxygen Control
Download
Telegram Group
Join Oxygen Kernel Community group on Telegram here
Join Oxygen Kernel Channel on Telegram here
If you like my work donations are always welcome
Google Pay UPI ID: [email protected]
Paypal: https://paypal.me/SiddhantNaik
Don't forget to hit the thanks button, it's free.
Credits
Samsung Open Source Center for the Source code
@Oves786 and @SolarX_dev for numerous help and support
@osm0sis for AnyKernel2
@jesec for Fingerprint Fix
@morogoku for MTweaks
Everyone others from whom i have picked commits (credited on Github)
XDA:DevDB Information
Oxygen Kernel J7 Pro, Kernel for the Samsung Galaxy J7 (2017)
Contributors
DarkLord1731
Source Code: https://github.comDarkLord1731/j7y17lte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: 2.0.132
Stable Release Date: 2019-01-26
Created 2018-05-23
Last Updated 2019-08-11
Changelogs:
Oxygen Kernel v2.0.132
Linux 3.18.132
Fixed kernel not booting on some TW oreo ROMs
Enabled back Input Booster for a better responsive user experience
Updated to latest kernel source
Removed some useless CPU governors (Only the best ones are kept)
Removed unwanted IO Schedulers (Only the best ones are kept)
Updated the kernel to better support AOSP ROMs
Switched to Google's GCC 4.9 toolchain
Removed a lot of useless debug and logging options
Disabled TIMA, KNOX, DM-VERITY,etc
Check github source for more changes
Loads of other changes
I can't list all of the changes because i've rebased the source code completely. But believe me, this is a major update.
Oxygen Kernel v1
Initial Release
Reserved
Battery And Performance At Its MAX
Thanks @DarkLord1731 For Your Work
Thanks you
It freezes in splash screen and then kicks back to twrpm J7 PRO G variant
mozzafar alali said:
Thanks you
Click to expand...
Click to collapse
Good work bro so far running great
parth111999 said:
Battery And Performance At Its MAX
Thanks @DarkLord1731 For Your Work
Click to expand...
Click to collapse
mozzafar alali said:
Thanks you
Click to expand...
Click to collapse
razkal1 said:
Good work bro so far running great
Click to expand...
Click to collapse
Thanks
LuanTeles said:
It freezes in splash screen and then kicks back to twrpm J7 PRO G variant
Click to expand...
Click to collapse
Fixed and reuploaded
DarkLord1731 said:
Thanks
Fixed and reuploaded
Click to expand...
Click to collapse
Same thing on j730f/ds
---------- Post added at 11:57 AM ---------- Previous post was at 11:47 AM ----------
skayii said:
Same thing on j730f/ds
Click to expand...
Click to collapse
nevermind, i flashed aosp kernel:/ My bad
Thanks, it was perfectly installed on J730FM (stock)
Thnaks.keep it update regularly..:victory:
Can it work on resurrection remix Oreo?
james Chimba said:
Can it work on resurrection remix Oreo?
Click to expand...
Click to collapse
Yes
Successfully installed in j7 pro G/DS though not rooted, any suggestion on how to root? the last time I rooted having issue on screen unlocking delay that I have to unroot.
Sorry for such a question, but it says "Any AOSP Oreo Roms", does this mean any or the only one found in the ROM Forum Secton for this device?
Hello,Can it work on ROM][7.0][NovaOS][J7 Pro J730F][NoteFE Full Port]?
GGhost said:
Sorry for such a question, but it says "Any AOSP Oreo Roms", does this mean any or the only one found in the ROM Forum Secton for this device?
Click to expand...
Click to collapse
Yes Any=Any AOSP oreo rom
Agusvn said:
Hello,Can it work on ROM][7.0][NovaOS][J7 Pro J730F][NoteFE Full Port]?
Click to expand...
Click to collapse
Yes
Battery life is way shorter on this kernel. But performance is much better
Noooooooo !!!
My battery gonna to die !! HELP ! :crying:
Battery life is fine for me rr 6.0 j730f
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR P10 LITE OREO
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Made with the codes released from Huawei. Flashing from recovery twrp from oreo.
this modified kernel is fully compatible with huawei P8lite 2017, P10 lite, P20 Lite, Mate 10 lite, Honor 7x and Honor 9 lite.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Download the ZIP
Save in external memory.
Flash through TWRP.
return to the main panel.
clean (only one cache).
turn off the phone for a minute and turn on
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
HONOR 7X----------link
HONOR 9L----------link
P8 LITE-----------link
P10 LITE----------link
P20 LITE----------link
MATE 10 LITE------link
do not copy this module, you can publish in other modified kernel with the respective credits
KERNEL 5.6 link
KERNEL 5.0 link
KERNEL 2.1 (P20Lite) link
KERNEL 2.1 link
KERNEL 2.0 link
KERNEL 1.8 link
XDAevDB Information
MorfuZ, Kernel for the Huawei HI6250.
Credits
- ajituchiha. (commits)
- Dil3mm4
- osm0sis/AnyKernel2
- Alexxx1 P10L
- Chisetdel31260 M10L
- Emrullah bingul P8L
- Valerio Gerva H7X
- Giacomo Fazio P20L
Contributors
Catuva21
Source Code: https://github.com/catuva21/hi6250-emui8.x
Version Information
Status: Stable
Created 2018-06-02
Last Updated 2018-10-11
DESCRIPTION MORFUZ KERNEL-EMUI 8This core aims at the optimal performance to battery ratio in mid-range terminals, Kirin 65X processor
KERNEL 5.6
Governor BIOSHOCK and DARKNESS back
Planner sio, sioplus and tripndroid back
Added other configurations that Morfuz Kernel 2.1 had
New governors CPUFreq dancedance intellicative.
KMS update
Optimization of blu_active governor for kirin
Other necessary modifications.
KERNEL 5.0
configurations since the beginning of the source codes of Huawei, some changes of the Kernel 2.1 morph
Upstream to the latest version of the kernel v4.4.129
Compiled with the latest Linaro tool 4.9.
EAS has been fully applied.
Conscious energy planning support
new governor governor Schedutil
ExFat has been updated
Frandom support
CPU optimizations and energy use.
IO optimizations
Selinux Permessive now without magisk module
O3 optimizations
Huawei specific optimizations
Uses a timer frequency of 300 HZ
Wireguard support.
Removed spam from unwanted registration
Enabled Advance TCP congestion algorithms
Westwood is used as the default TCP algorithm
Many changes to improve performance.
KERNEL 2.1:
Compiled with the latest Linaro tool chain 4.9
Changed kernel code sources
Selinux Permissive
corrected the MMC - USSD
KERNEL 2.0:
Compiled with the latest Linaro tool chain 4.9
Added fsync support on-off
energy saving.
governor improvements by default
updated boeffla_blocker ver 1.1.0
Advanced TCP
disabled check root
added cpu_boost
GPU get aware
power quickwakeup
KERNEL 1.8:
Added Governador Blu_Active
Added Governador Impulse
Added Governor Darknnes
Added Governor Bioshock
Added I/O scheduler: Sio
Added I/O scheduler: Sio Plus
Added I/O planner: Zen
Added I/O planner: Tripndroid
LZ4 compression
Compiled with the latest Linaro tool chain 4.9
Selinux Permessive
Wireguard support
reservet
Where did you get sources? Huawei didn't release EMUI8 sources yet as far as i know.
Zillinda said:
Where did you get sources? Huawei didn't release EMUI8 sources yet as far as i know.
Click to expand...
Click to collapse
use another source hi6250 oreo, I left the link in the publication
Hell yeah!!!
I tried this kernel on my Honor 7x running on Oreo emui 8.0. And it's changed the complete performance of the device. Incredible speed for multitasking and finger,face unlock. And feeling the difference in battery life too. Games became more smoother. Even though I can play Pubg without lag (special thanks for that). Suggested this kernel for a lot of friends, they are loving it.
Keep the good work going. And give us updates. Eagerly waiting.
*Loving your work*
Thank you again for making this awsome kernel....??
Thanks very much for this kernel, it gave us a huge performance increase in our device (Both stock and treble roms)
One side note tho, after flashing this kernel only the p10 lite recovery works with it, i think it's because the recoveries share the same ramdisk maybe ?
Tested on Honor-7x (BND-L21C185) Emui 8
adarshar123 said:
Hell yeah!!!
I tried this kernal on my Honor 7x running on Oreo emui 8.0. And it's changed the complete performance of the device. Incredible speed for multitasking and finger,face unlock. And feeling the difference in battery life too. Games became more smoother. Even though I can play Pubg without lag (special thanks for that). Suggested this kernal for a lot of friends, they are loving it.
Keep the good work going. And give us updates. Eagerly waiting.
*Loving your work*
Thank you again for making this kernal....??
Click to expand...
Click to collapse
Thanks for trying, apparently it is compatible with:
HUAWEI P10 LITE
HUAWEI MATE 10 LITE
HUAWEI P8 LITE 2017
HONOR 7X
HONOR 6X
CATUVA21 said:
Thanks for trying, apparently it is compatible with:
HUAWEI P10 LITE
HUAWEI MATE 10 LITE
HUAWEI P8 LITE 2017
HONOR 7X
HONOR 6X
Click to expand...
Click to collapse
@CATUVA21 can we expect further updates on this kernal? I'm loving it and for our device there is no hope for new custom kernals. And I would like to stick with this. I'm curious to know that, you are working on this kernal or not!! Please make a reply!!✌✌
CATUVA21 said:
Thanks for trying, apparently it is compatible with:
HUAWEI P10 LITE
HUAWEI MATE 10 LITE
HUAWEI P8 LITE 2017
HONOR 7X
HONOR 6X
Click to expand...
Click to collapse
yeah im currently using it with my p8 lite 2017 and charging speed increased a little bit on treble roms. thank you. its just that in normal usage it gets warm
adarshar123 said:
@CATUVA21 can we expect further updates on this kernal? I'm loving it and for our device there is no hope for new custom kernals. And I would like to stick with this. I'm curious to know that, you are working on this kernal or not!! Please make a reply!!
Click to expand...
Click to collapse
if I upgrade to where this kernel can, for now I'm busy in the family:laugh::laugh:
CATUVA21 said:
Thanks for trying, apparently it is compatible with:
HUAWEI P10 LITE
HUAWEI MATE 10 LITE
HUAWEI P8 LITE 2017
HONOR 7X
HONOR 6X
Click to expand...
Click to collapse
Honor 9 Lite had hi6250, so it too?
hackintosh5 said:
A
Honor 9 Lite had hi6250, so it too?
Click to expand...
Click to collapse
it would be a matter of course that you will perform kernel testing
CATUVA21 said:
it would be a matter of course that you will perform kernel testing
Click to expand...
Click to collapse
I'm not really as I misflashed previously and it cost me €20 and a lot of free time. I'll ask around..
Sent from my kminiltexx using XDA Labs
Works on honor 9 lite
The ui is much smoother then before
Also can the developer add wakelock blockers?
@CATUVA21 does the source code repo include WiFi/Bluetooth fixes?
And which branch is the latest release compiled from?
Sent from my kminiltexx using XDA Labs
Honor 9 Lite... tested since 48h...
No errors, all working.
One Problem. Setenforce 0 runs without errors but getenforce still gives enforcing state back.
@CATUVA21, Hi ...did flash this kernel...its very smooth.only got one issue ,cant run any USSD code on my dialer..am on WAS-LX1AC432B362
stevelexx said:
@CATUVA21, Hi ...did flash this kernel...its very smooth.only got one issue ,cant run any USSD code on my dialer..am on WAS-LX1AC432B362
Click to expand...
Click to collapse
Great! I've been wracking my brain why!)
Does the kernel source on GitHub have patches for WiFi and BT? Also, please could you push the V2 source, and add a tag/release for v1.8. it would also be great to have build instructions.
Thanks for the great kernel!
Sent from my kminiltexx using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
Requirements:
-Huawei P10 Lite WAS-L01,L01A,LX1,LX1A,LX2,LX2J,L22,L22J,LX3,L23,L03
-Huawei P10 Lite-Recovery Twrp EMUI 8.0.0
https://forum.xda-developers.com/p1...-emui-8-0-0-huawei-p10-lite-dual-sim-t3780780
-Only For Free Versions (Dual Sim And Single Sim)
-Bootloader Unlocked
-Activate OEM Unlock
CONTENTS...
- Credits :angel:
- Features
- Bugs
- Installing Procedure
- Downloads :laugh:
- How to use
- Test
BUGS...
- Not found yet.
INSTALLING PROCEDURE...
- Download CUSTOM KERNEL and install Recovery Twrp, The files You are in the download section.
- Copy it to your device sdcard(outside the folder)
- Go into recovery mode
(Make Sure to be in F2FS data partition)
- Select Elemental-Kernel.zip
- Installation Starts
-Make,Wipe,Davilk Cache
- Reboot Now
- Done.
The Group Telegram: Huawei Development
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
The THANKS button encourages me to keep working for free. You decide if it's worth pressing
XDA:DevDB Information
Kernel For The Huawei P10 Lite
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
vovan1982
ginnocenti
Alexxxx1
-KangVIP Framework & Team HRT
-Team Win Recovery Project For P10 Lite
-Huawei Technologies Co, Ltd. 华为技术有限公司
Kernel-Source: https://github.com/KingOfMezi/Kernel-Elemental.git
ROM OS Version: Android 8.0.0 Oreo
ROM Kernel: Linux 4.4.23+
ROM Firmware Required: EMUI 8.0.0
Version Information
Status: Stable
Current Stable Version: 2018-10-10
Stable Release Date: 2018-10-10
Created: 2018-10-10
Last Updated: 2018-10-10
The THANKS button encourages me to keep working for free
You decide if it's worth it to press or donate
https://www.paypal.me/KingOfMezi
ChangeLog:
(2018-10-16) Elemental-KernelV5.8-EMUI8.0.zip
Elemental-KernelV5.8-EMUI8.0 https://mega.nz/#!rE5kUCpL!RWyDWXq4YZXWccIp4yT_T7qfbITebkZ2YoLKrahIGIA
-Removed Root Check Hi6250 All models:
Hey, I just tried the kernel, without root but WITH an unlocked boot loader and its kernel and it goes to safetynet and it works with pokemon without magisk root, so thank you very much for this amazing kernel. It's simply the best thing that could happen for all hi6250 devices.
edit: after updating magisk to 17.1, Pokémon go is working
-Activate Lazyplug:
Awesome changes coming,options , lazyplug (arters new awesome project which increases performance and battery ) new gpu drivers , new malloc ( Jcmalloc 4.0.0 )
kernel is going to be awesome !! ... https://github.com/KingOfMezi/Kernel-Elemental/commit/cf5803b88bf7d0d45c1f2cfac6c6699d7b3b7ad5
-Activate Huawei Einstein Music https://drive.google.com/file/d/1sV_Ju-Une77vR2KJjB7FW2FAlnThMyQw/view
-Enabled call recorder for any version https://drive.google.com/file/d/1it-78sL_hJzLIP2kRHkbF1EqM4229pLf/view
Click to expand...
Click to collapse
-Fixed Wifi and Bluetooth everything works
-Deleted Virtual fingerprint
-Compiled with latest Linaro 4.9 toolchain GCC 8.1.0
-Activate additional TCP congestion algorithms
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
+ Performance and new codes
-I/O Scheduler (Zen, tripndroid, sio, sioplus)
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5 https://drive.google.com/file/d/10Br79of4Q7PfffGcsSDaHAHcldJRAz7S/view
-Enabled CloudFolder
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100% https://drive.google.com/file/d/1L2d-DVMi4hJ2FV_d7_EoSsNKfRspDMpG/view
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
(2018-10-14) Elemental-KernelV5-EMUI8.0.zip
Download: Link Available: https://mega.nz/#!2RJEzC4Z!NBd5h1JUjmLl0u4nlXs6Cx-8C92Kb9OJZ0T4FmgfqEc
-Fixed Wifi and Bluetooth everything works
-Deleted Virtual fingerprint
-Compiled with latest Linaro 4.9 toolchain GCC 8.1.0
-Activate additional TCP congestion algorithms
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957
+ Performance and new codes
-I/O Scheduler (Zen, tripndroid, sio, sioplus)
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5
-Enabled CloudFolder
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100%
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
(2018-10-10) Elemental-KernelV4-EMUI8.0.zip
Download: Link Available: https://mega.nz/#!OEgnzSwb!_mLi1k6BK5EXtvRHJETDyMJJgdbMV-zL5eZzmVWJVGY
-Compiled with latest Linaro 4.9 toolchain
-Adds Bluactive Governor
-Adds Impulse Governor
-Enabled Selinux Permissive
-Updates to reduce kernel size
-Added zen, fiops I/O schedulers
-Config.Video_Fullscreen (Unlimited)
-Enabled screen rotation automatic
-Enabled screen 4x4,4x5,5x5,6x5
-Enabled CloudFolder
-Enabled Fingerprint Virtual
-Config.SlowMotionZoom
-Config.Videosize.1080p
-Enabled Facial Unlock 100%
-Twin application
-Support DTS
-Frp_unlock
-Optimizations Etc
-Is More Stable And Fluid
-Activated All Huawei Hidden Functions
After flashing, I'm not able to turn WiFi on.
dawid9706 said:
After flashing, I'm not able to turn WiFi on.
Click to expand...
Click to collapse
ok I will solve that detail and upload again to Kernel V4.1 do not worry :good:
The THANKS button encourages me to keep working for free. You decide if it's worth pressing
edit: source code released https://github.com/KingOfMezi/Kernel-Elemental
Even when.I flash the kernel and I open about phone it shows that I have V2 ... do I need to.change the twrp recovery from @KingOfMezi
ameshiya said:
Even when.I flash the kernel and I open about phone it shows that I have V2 ... do I need to.change the twrp recovery from @KingOfMezi
Click to expand...
Click to collapse
The elemental rom comes by default with its kernel,sorry
edit: Use it in emui 8.0.0 stock, you will have many incredible functions,luck :highfive:
Sorry there are two things that I didn't undestand:
Removed Root Check Hi6250 All models means that the kernel is not rooted?
-Make,Wipe,Davilk Cache means that I have to wipe only the Dalvik cache or that I have to wipe everything plus the Dalvik Cache?
Thanks
Another question, installing your kernel still I pass SafetyNet in magisk?
TIA
Harlock1978 said:
Another question, installing your kernel still I pass SafetyNet in magisk?
TIA
Click to expand...
Click to collapse
Everything is working good but if u have september+ patch u will get USSD code error.
About wipe: just click here and swipe.
Thank you, I have the latest firmware installed (.376) so I think if I installed this kernel I will have the USSD error.
If I flash this, will I continue to get OTA updates?
I have TWRP from Pretoriano-twrp_p10_lite_0.4.img. Can i flash this kernel? One more thing if i want to back to stock kernel its possible? Thanks in advance.
noslen69 said:
I have TWRP from Pretoriano-twrp_p10_lite_0.4.img. Can i flash this kernel? One more thing if i want to back to stock kernel its possible? Thanks in advance.
Click to expand...
Click to collapse
Yes and yes.
Who i make to reverte back to stock kernel? Thanks for the help. I make this questions because i am afraid to make something wrong and i have only this phone.
noslen69 said:
Who i make to reverte back to stock kernel? Thanks for the help. I make this questions because i am afraid to make something wrong and i have only this phone.
Click to expand...
Click to collapse
You have stock kernel on team pheanom blog I downloaded it and if u can't find I will upload...
nemanjsb said:
You have stock kernel on team pheanom blog I downloaded it and if u can't find I will upload...
Click to expand...
Click to collapse
One last question, i am in stock rom 8.0 i have F2FS data partition or i have to do something before flash the kernel.
Please upload the stock kernel. Thanks for you help.
noslen69 said:
One last question, i am in stock rom 8.0 i have F2FS data partition or i have to do something before flash the kernel.
Please upload the stock kernel. Thanks for you help.
Click to expand...
Click to collapse
Bootloader unlocked?
Stock kernel
nemanjsb said:
Bootloader unlocked?
Stock kernel
Click to expand...
Click to collapse
Yes unlocked. And stock kernel.
noslen69 said:
Yes unlocked. And stock kernel.
Click to expand...
Click to collapse
It's ok go on.
nemanjsb said:
It's ok go on.
Click to expand...
Click to collapse
I flash it everything ok. Looks like its a bitte more slow. Can i do something, do we have any settings? Another thing do you know any Google camera that works whit our phone. Thanks for your help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C.A.F 4.9 KERNEL
What is this kernel ?
This Kernel is designed for stability , security optimized as possible with latest caf tag update .
What is features included in this Kernel ?
driver stable from daisy-o-oss in majority ( exept peelir and touchscreen... )
majority change driver come from : @33bca & @rama982
latest CAF Kernel from LA.UM.8.6.2.r1-07800-89xx.0
latest Prima WLAN LA.UM.8.6.2.r1-07800-89xx.0
latest Techpack audio LA.UM.8.6.2.r1-07800-89xx.0
compiled witch latest proton-clang 11 release
upstreamed to 4.9.231
-fp fpc/goodix gestures
-dt2w enabled for all screen !
*underclock clock GPU 19mhz
*GPU timeout 62s
*ttl support
*full support ipv6
*lz4 zram enabled
*governor cpu available : schedutil , powersave , performance
*schedutil governor improved ( cleaned and added lot commit linaro )
*cpufreq fix linaro
*exfat support
*scheduler i/o available :
- cfq (enabled in default ) , bfq , deadline , noop
*thermal change
*vdso32
*TCP congestion controller available:
TCP BIC
TCP CUBIC ( default enabled )
TCP WESTWOOD
TCP HTCP
TCP HSTCP
TCP HYBLA
TCP VEGAS
TCP NV
TCP SCALABLE
TCP LP
TCP VENO
TCP YEAH
TCP ILLINOIS
TCP DCTCP
TCP CDG
TCP BBR ( commit fix added )
*franco cpu-boost & Pull in Modified version for EAS cpu-boost
*touchboost option ( disabled in default )
*Wakelock blocker { block list enabled by nathanchance and franco }
*devfreq optimization
*sched optimization
*genirq optimization
*cpuidle / s2idle optimization
and probably more check sources for more information about features and change ...
Compatible Systems with this Kernel
This kernel is only compatible for Android 10 custom rom !
Stock android 10.0 and gsi from @phhusson is no supported , all stock vendor no support kernel 4.9 also !
DOWNLOAD
This Kernel will receive updates with new CAF tags and new upstream
Guide Install :
Boot into TWRP recovery
Flash the Kernel ZIP file & re-flash magisk if installed
wipe dalvik-cache & Reboot to System- enjoy!
Thanks for :
Xiaomi kernel sources
Code Aurora forum for caf 4.9 release
@rama982
@33bca
@krasCGQ
-and all other no mentionned in sources
XDAevDB Information
C.A.F Kernel 4.9 for Mi a2 lite and Redmi 6 pro (daisy / sakura)
Contributors :
@ada12
Source Code: https://github.com/RebornDaisyProject/daisy_msm8953/
Status: Stable
Update 13/06/2020 :
*everything is rebased check post
Update 24/06/2020 :
*big changelog see here : https://pastebin.com/z7zR7T6q
Update 29/06/2020 :
*changelog >>> https://del.dog/celytuconi.txt
Update 23/07/2020 :
*changelog >>> https://del.dog/yuworfimyk.txt
OMG... A powerful kernel!
Thanks guy
Thank you! need miui version ! ^^
miui cant support kernel 4.9 sadly same as stock vendor ! no video codec, cant take camera record and no fp fpc its need custom vendor ...
alcopsy said:
Thank you! need miui version ! ^^
Click to expand...
Click to collapse
Now installed on my phone with POSP on it. So far it's good.
good work <3
this kernel normally working with pexel experience rom with android 10?
After switch mobile data in other sim needs reboot phone for eneble mobile data
That bug is due to your rom ( trees sources ) . report to your maintener rom witch full log for help dev
andrey1981 said:
After switch mobile data in other sim needs reboot phone for eneble mobile data
Click to expand...
Click to collapse
This kernel is compatible witch all rom custom android 10.0
andrey1981 said:
this kernel normally working with pexel experience rom with android 10?
Click to expand...
Click to collapse
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
andrey1981 said:
Which governor in this kernel saves maximum energy?
dt2w function not working in hx8399c touch panel in this kernel.
Other functuinons working normal.
thanks for great work!
Please fix dt2w for hx8399c touch panel for Redmi 6pro.
Click to expand...
Click to collapse
ada12 said:
blu_schedutil save more energy ...
about hx8399c touch panel, thanks for report I will look on it for add
Click to expand...
Click to collapse
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
ok... maybe driver no shared by xiaomi like fts before , If I find driver I tell you
andrey1981 said:
hx8399c doesn't work on many kustom roms and kernels. in stock miui work normal. this is original xiaomi panel
View attachment 4935969
Click to expand...
Click to collapse
Thanks bro, in latest kernel dt2w normal working with hx8399c.
Great work!!!
where are you take this driver?
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
1- For have better life battery, you can use battery charge limit [Root] app for limit your charge to 80%
2- in custom version kernel from Smartpack kernel manager you can set all perfctl value to -10mv for good undervolting phone
perfect_ said:
Hi,
thanks for ur work.
My concern is unexpected shutdown. When battery gets old phone shutdowns himself at %30 battery level or so. Apple fixed it with reducing overall system power draw. At least we can play with Cpu voltages using these kernels. Can you develop simple button for it?
More info
1- https://forum.xda-developers.com/android/help/android-fail-safe-unexpected-shutdown-t4042257
2- https://support.apple.com/en-us/HT208387
3- Xiaomi Mi A2 Lite user experiencing unexpected shutdown.
https://www.reddit.com/r/Xiaomi/comments/eueg14/battery_problems/
Click to expand...
Click to collapse
Update 23/02/2020 :
*ainur sound enabled
*state notifier
*voltage controls setting ( no default under )
*arm64: msm8953-regulator: >Optimized the regulator for good performance
*oc cpu 2152 mhz and oc 2208mhz
*oc gpu 725mhz
*under 19mhz gpu
*TTL fix
*lz4 zram updated and set in default
*adreno idler
*added 4 governor eas :
blu_schedutil
pixutil
smurfutil
pixel_smurfutil
waiting 4.9.215 OC version...