Huawei Mate 8 [Oreo Upgrade] unofficially - NXT-AL10 8.0.0.829(C00)
EMUI 8 - Android 8 [optionally Kangvip System]
Test device:
Huawei Mate 8 (NEXT) - Model Number: Huawei NXT-L29 - Build Number: NXT-L29C432B583 OTA updated - free device - without branding - with root andTWRP recovery.
Since March no update has arrived on the Mate 8 (C432) and I expect it, Oreo will never arrive here either. So I've worked out a way to get Android 8 on the device.
It's really worth it, because the Mate 8 is still capable of easily keep up with the latest smartphones.
However, the "conversion" is quite complex and risky. This whole thing is also hard to undo. Consider participating well here. Knowledge of the subject is absolutely indispensable for the following actions. If you don't have an "overview" here, it's better to leave it alone, because the risk of this entirely up to the user. How to work with HiSuite, the Firmwarefinder and ADB, I will not go into more detaildescribe. I assume that you have a basic knowledge of this.
Requirements: - Firmware C432B582/83, - Root, - OEM and FRP unlocked, - USB Debugging on and HiSuite.
Copy the Firmwarefinder App to the SD.
Remove all codes. Sim, Unlock, Fingerprint.
Make sure the stock recovery is on the M8.
Then the SRK tool must be used to rebrand the M8 to AL-10.
Download:*https://androidfilehost.com/?fid=24572369242687273
Boot the rooted M8 and connect it to the PC via USB.
Grant access rights.
Enable USB debugging and OEM unlocking.
Start SRK Tool and start with option 7.
Option 9 sets the OEM info to cn (AL10).
During the flash process, access rights are requested on the M8 which must be confirmed.
After completion, the system reboots automatically. If the recovery now appears and a factoryreset or a data reset is requested, execute it.
After rebooting (may take up to 20 minutes), perform setup.
Reject or skip everything for security and Google, but sign up for WLan.
The Sim doesn't work yet. Continue not to pay attention.
Install the Firmwarefinder App. Search for this firmware there:
NXT-AL10C00B596, FF-No.: 144931 - 2,332 GB -
now GET AN UPDATE THROUGH DNS / MANUALLY / REGISTER UPDATE
Switch off M8.
Now activate DNS in the router/ look screenshot.
Now boot the M8 into the eRecovery.
Press Vol.+ and Power together and hold them. Release when the Huawei logo appears.
After a few seconds the eRecovery starts.
There on "Download latest version and recovery." "Download and recovery."
The B596 is now installed.
This will take a while, of course. Afterwards, the device reboots again. If a reset is requested again, execute it.
After the same quick setup as before, check the system update to see if an update to the B598 is offered. If so, perform this.
After completion and reboot, install the Firmwarefinder App again and search for this firmware:*
NXT-AL10C17B828 (8.0.0.828), FF-No.: 152726 - 2,292 GB -
Now to GET AN UPDATE THROUGH DNS / AUTO / RUN VPN SERVICE,
In the settings under System Update now execute the Oreo Update.
If the update B828 is not displayed there: In the Firmwarefinder the update via
GET AN UPDATE THROUGH Select DNS / MANUALLY / REGISTER UPDATE
and execute it via eRecovery.
After the reboot, in the system update via OTA the update to the
B829 is offered. Please execute it.
Now Oreo is installed and it gets regular updates via OTA.
You can now also install all updates via HiSuite PC and
even downgrades.
Unlocking:
Activate in the developer options: Allow ADB debugging in "load only" mode and
USB debugging. !! The correct order is important. !!
OEM Unlock (FRP) is no longer available.
Now reboot into the bootloader with USB connection and unlock the device with the Huawei Unlockcode via ADB.
Unfortunately, there is another Factoryreset after that.
After the reboot, set the two USB switches to the right again and then flash and root in fast boot mode via ADB TWRP. (Magisk 16.4)
Install and reboot the included modules in the Magisk Manager App.
Now the Sim card must be activated:
2018-08-17--11-32-28.cust.B829.zip download and unzip.
This results in the TWRP backup "2018-08-17--11-32-28.cust.B829".
Copy it to the SD card in your current TWRP backup directory
and restore it using TWRP restoring.
If this does not work, download and unpack CUST.rar. Then flash with adb: fastboot flash cust cust.img **
After the reboot the sim works correctly.
Now we have to make sure that all Google services work.
Install the GooglePlayStore.apk and try to login/set up your Google Account.
If this is not possible, the following must be carried out:
Install the App System App Remover.
Uninstall all Google Apps and Services.
(The busybox module must be installed in magisk.)
Install and run the Google Installer App.
Then reboot and everything should work.
You're done now!
ADB Flash Commands:
EMUI 5:
fastboot flash recovery recovery.img
fastboot flash recovery M8.TWRP.EMUI5.img
EMUI 8/ Oreo:
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_ramdisk TWRP.M8.OREO.img
Finally I created a Kangvip system for you.[font=Hind, sans-serif] In the download folder you will find the TWRP backup:
2018-08-18--KANG.SYSTEM. Just put it in your TWRP backup folder on the SD card and restore.
[/font][font=Hind, sans-serif]Note on TWRP:
There is currently no TWRP recovery available for the Mate 8 with OREO.
That's why I borrowed it from the P Smart. You cannot use it to create backups. However, it is suitable for installing Zip´s.
All other operations should be performed "with caution". TWRP starts in Chinese language and must be set to "English".
[/font]You can find everything you need with the download link in the attachment.
Again, think really hard about doing all this. If the terms mentioned are alien to you, look them up on the net.
Don't you get it? Let it go.That all this works on my device does not necessarily mean that it is works for you, too. A brick is quite possible in case of incorrect execution.
Excuse my bad English, please. I translated it with DeepL translator.
Thank you G. Man. For your hard work, and this steps really need to be very focused :good::good:
Regards
@G.Man. u were on nougat when u rebrand or marshmallow ? i tried b4 with marshmallow and i always get this error
https://ibb.co/eHpUne
btw im on L29C185B585
can u explain bro what u did to rebrand
crazyof said:
@G.Man. u were on nougat when u rebrand or marshmallow ? i tried b4 with marshmallow and i always get this error
https://ibb.co/eHpUne
btw im on L29C185B585
can u explain bro what u did to rebrand
Click to expand...
Click to collapse
I only used this tool. However, the device must have 100 % root, then it works.
hamadazh said:
Thank you G. Man. For your hard work, and this steps really need to be very focused :good::good:
Regards
Click to expand...
Click to collapse
Maybe you could use this:
https://mega.nz/#F!qSpjyJqI!oqFDBV25nI66J2cL9KUGJQ
G.Man. said:
Maybe you could use this:
https://mega.nz/#F!qSpjyJqI!oqFDBV25nI66J2cL9KUGJQ
Click to expand...
Click to collapse
Actually i changed my dear mate8 and I've mate 10 now,, but i can't leave mate 8 section
---------- Post added at 06:56 PM ---------- Previous post was at 06:49 PM ----------
crazyof said:
@G.Man. u were on nougat when u rebrand or marshmallow ? i tried b4 with marshmallow and i always get this error
https://ibb.co/eHpUne
btw im on L29C185B585
can u explain bro what u did to rebrand
Click to expand...
Click to collapse
Try this enter to superSU app settings then default access and change from prompt to grant then try again.
@hamadazh
I now have the Mate 10 lite. But still use the Mate 8 as daily driver.
G.Man. said:
@hamadazh
I now have the Mate 10 lite. But still use the Mate 8 as daily driver.
Click to expand...
Click to collapse
Yeah for me i returned back to stock then give it to my daughter and use the new generation from mate family
But i can't unlock it huawei closed unlock site and DC unlocker not support payments from my country too and i don't know what can i do with this,, no unlock, no twrp, no root, no testing, no bricking, all this = booooring very,
I've only mate 10, 128gb and 6gb ram for nothing, just make calls, answer calls, browsing, watching youtube, play with camera :laugh: then charge it onnnnnly :crying:
No bootloader unlock=no Fun at all
Regards
hamadazh said:
Actually i changed my dear mate8 and I've mate 10 now,, but i can't leave mate 8 section
---------- Post added at 06:56 PM ---------- Previous post was at 06:49 PM ----------
Try this enter to superSU app settings then default access and change from prompt to grant then try again.
Click to expand...
Click to collapse
@hamadazh could be the prob coz i rollback to marshmallow build 190 ? or doesnt matter what build is ? and if u have links to rollback for older build ?
L29C185 here
hamadazh said:
Yeah for me i returned back to stock then give it to my daughter and use the new generation from mate family
But i can't unlock it huawei closed unlock site and DC unlocker not support payments from my country too and i don't know what can i do with this,, no unlock, no twrp, no root, no testing, no bricking, all this = booooring very,
I've only mate 10, 128gb and 6gb ram for nothing, just make calls, answer calls, browsing, watching youtube, play with camera :laugh: then charge it onnnnnly :crying:
No bootloader unlock=no Fun at all
Regards
Click to expand...
Click to collapse
I have an account for you with 4 credits, is that enough?
@G.Man. bro u were on marshmallow when u rebrand ? if yes which build number u were in?
G.Man. said:
I have an account for you with 4 credits, is that enough?
Click to expand...
Click to collapse
Ooh thank you so much my friend you've a good heart, really :good:
But there's a problem too maybe i forgot to say it, it's DC not support my version 8.0.0.138 and i spent much time searching for go back to less version i found something but I am not sure about it it something about if my version have xloader 1 or not i can't explain more because i don't understand yet.
So I've to understand firs,, also i sent a lot of emails to huawei asking for bootloader code and waiting for answer. :good:
Thank you so much for your contribution. :good:
Thank you so much for trying helping me. :good:
Regardes
@hamadazh as i remember u said ur going to buy mi mix why u jump to fkng locked anti supported mate 10
btw mate 8 L29 will get oreo or only chinese ver
ill switch to device with androind one sys
crazyof said:
@G.Man. bro u were on marshmallow when u rebrand ? if yes which build number u were in?
Click to expand...
Click to collapse
Look #1 Test Device:
speechless said:
@hamadazh as i remember u said ur going to buy mi mix why u jump to fkng locked anti supported mate 10
btw mate 8 L29 will get oreo or only chinese ver
ill switch to device with androind one sys
Click to expand...
Click to collapse
I don't like xiaomi mate 10 very better than xiaomi also xiaomi not good support in my country, and my mate 10 is 6gb ram it's very speed nothing stopped in his way very smooth charging 58% in 30 minutes, it's greet phone.
Mate 8 L29 off course will have Oreo but when? I don't know like my mate 10 L29 have 8.0.0.138 and chinese version have 8.1
hamadazh said:
I don't like xiaomi mate 10 very better than xiaomi also xiaomi not good support in my country, and my mate 10 is 6gb ram it's very speed nothing stopped in his way very smooth charging 58% in 30 minutes, it's greet phone.
Mate 8 L29 off course will have Oreo but when? I don't know like my mate 10 L29 have 8.0.0.138 and chinese version have 8.1
Click to expand...
Click to collapse
as a hardware is very good snapy 4 sure but i hate locked devices i have nokia 7 plus with android 9 pie easy to play with:cyclops:
What if I revert to marshmallow, rebrand to AL10 then keep updating via system update or firmwarefinder until I reach oreo? Is that possible?
Astra1 said:
What if I revert to marshmallow, rebrand to AL10 then keep updating via system update or firmwarefinder until I reach oreo? Is that possible?
Click to expand...
Click to collapse
You will get the update via system normally, no need for FF.
---------- Post added at 07:19 PM ---------- Previous post was at 07:16 PM ----------
crazyof said:
@hamadazh could be the prob coz i rollback to marshmallow build 190 ? or doesnt matter what build is ? and if u have links to rollback for older build ?
L29C185 here
Click to expand...
Click to collapse
Sorry man i didn't see this post, it doesn't matter what build is, you'll got the update normally via system update, you want debrand to chinese version or what? If yes, it's ok any MM build.
Which build you are in now?
I debranded to AL10 from L29 . Updated all the way from B192 to B596, but it's not updating after that. There are many oreo firmwares on FF including the one OP mentioned, I tried the proxy and the dns methid, both of them. But no updates in the system update section. My bootloader is unlocked.
i m waiting Oreo updating for Huawei mate 8 .. does anyone have information about it ? When will it come ? I still have got Nougat 7.0
Model : NXT-L29 B560
Related
Edit: WARNING: B118 or other Chinese firmwares can brick your phone.
And supposedly has better optimization for games.
http://tieba.baidu.com/p/2733803032
The local update for China B118 is now available. From the comments on the forum the rom is BL unlocked. Other than that, this update got some new applications like voice assistant and market. The kernel on this B118 (unicom) is 3.0.8-00844. The kernel on B117 was 3.0.8-00829.
Huawei Ascend P6 Unicom version
( P6 -U06, EmotionUI 1.6, B118)
Release notes
Fit for:
Huawei Ascend P6 Unicom version ( P6-U06 )
Note:
Please brush before carefully read Brush tutorial and back up personal data, to avoid the risk of the process to bring;
This version only applies to the above fit models, other models are not supported;
To ensure system stability, it is recommended not to use third-party tools for system operation ROOT!
[The recommendation]
New section Huawei APK application
updates every day to chat, application markets, music and other applications
optimized to improve game compatibility
Download:
This post hidden content
http://zh.ui.vmall.com/emotiondownload.php?type=P6-U06
Huawei Ascend P6 mobile version
( P6 -T00, EmotionUI 1.6, B118)
Release notes
Fit for:
Huawei Ascend P6 mobile version ( P6-T00 )
Note:
Please brush before carefully read Brush tutorial and back up personal data, to avoid the risk of the process to bring;
This version only applies to the above fit models, other models are not supported;
To ensure system stability, it is recommended not to use third-party tools for system operation ROOT!
Update:
[The recommendation]
New section Huawei APK application
update music
optimized to improve game compatibility
Download
This post hidden content
http://zh.ui.vmall.com/emotiondownload.php?type=P6-T00
Huawei Ascend P6 Telecom Edition
( P6 -C00, EmotionUI 1.6, B118)
Release notes
Fit for:
Huawei Ascend P6 Telecom Edition (P6-C00)
Note:
Please brush before brushing carefully read the tutorial, and back up personal data , to avoid the risk of the process to bring;
This version only applies to the above fit models, other models are not supported;
To ensure system stability, it is recommended not to use third-party tools for system operation ROOT!
[Recommended] The
new part of the Huawei apk application
add -wing talk easily replaced with a letter
updating every day to chat, application markets, music and other applications
optimized to improve game compatibility
Download:
This post hidden content
http://zh.ui.vmall.com/emotiondownload.php?type=P6-C00
Upgrade Guide: This is the complete package, download a good decompression. , Is simply extract the files into the SD obtained dload root shutdown - then the power button and volume up and down keys with the press, three built strong brush, it can be upgraded to 118 from 117 online, update instructions from Huawei pollen club.
This update seems not many things, but it seems a lot of optimization, more importantly, to the glory of three updates after unlocking BL 118, the real REC out. Glory III and P6 did not much difference, as we all know, then this update to P6 118, is not it really a real REC it? Let us wait and slowly,
Click to expand...
Click to collapse
SOURCE
mega.co.nz mirror https://mega.co.nz/#!1EN2WQQb!BzgV6Cw-uw3NZF97L_ALEyuyyZ51f5-ennpVLClYP00
does this update work on European (Hsdpa/Umts-Phones)?
And ... is it really decrypted ..
if it is It would be a reason to downgrade from B122 to B118
If someone tries and gets a failed update, they might have to unroot first. Some chatter on that on Chinese forums.
I installed this. Haven't had enough time to explore everything, but there are some things added. Antutu results are as usual.
kaspars_l said:
I installed this. Haven't had enough time to explore everything, but there are some things added. Antutu results are as usual.
Click to expand...
Click to collapse
Is Gapps included? Also, what has been added?
miz_pimp said:
Is Gapps included? Also, what has been added?
Click to expand...
Click to collapse
Install via soft update and you will have GAPPS. I just did it and everything from B122 works here too.
ps - Asphalt 8 and Nova 3 are working without any lag /these games are lagging awful in B122/! First impressions are that the battery is optimized too! Great!
Apparently this ROM B118 China, finally we have fully unlocked the bootloader of the loader.
Look Ry09iu this news:
http://210.245.210.204/thread-8587439-1-1.html
amonev said:
Install via soft update and you will have GAPPS. I just did it and everything from B122 works here too.
ps - Asphalt 8 and Nova 3 are working without any lag /these games are lagging awful in B122/! First impressions are that the battery is optimized too! Great!
Click to expand...
Click to collapse
Any bugs noticed? Wifi drops, heating, decrease in speed?
warea said:
Any bugs noticed? Wifi drops, heating, decrease in speed?
Click to expand...
Click to collapse
I loss my conection with 3g and toggles too
alex61194 said:
I loss my conection with 3g and toggles too
Click to expand...
Click to collapse
No problems with connections at all!
alex61194 said:
I loss my conection with 3g and toggles too
Click to expand...
Click to collapse
How did you update, and from which version of firmware are you updating?
@amonev, did you do a factory reset before, or after, doing the soft update?
I've been struggling to download this since last night already, otherwise I'd already have updated by now.
Sent from my HUAWEI P6
reyncla said:
Apparently this ROM B118 China, finally we have fully unlocked the bootloader of the loader.
Look Ry09iu this news:
http://210.245.210.204/thread-8587439-1-1.html
Click to expand...
Click to collapse
Hi !
After installing the new B118 , I can see this when I try to install an UPDATE.APP :
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Click to expand...
Click to collapse
and also :
> fastboot oem get-bootinfo :
...
( bootloader ) unlocked
OKAY [0.608s]
finished. total time : 0.608s
Click to expand...
Click to collapse
So this means its fully unlocked, just the update agent gives false info about it being in the LOCK state?
tauio111 said:
So this means its fully unlocked, just the update agent gives false info about it being in the LOCK state?
Click to expand...
Click to collapse
Yes, bootloader was always unlocked ! only agent loaders check signature for all partitions , and we can not install anything without Huawei signature !
When you check > fastboot oem get-bootinfo :
if you will see < waitng for device > : you should uninstall this driver with yellow triangle from Device Manager " android sooner single adb interface " and reconnect device in fastboot mode !
surdu_petru said:
Yes, bootloader was always unlocked ! only agent loaders check signature for all partitions , and we can not install anything without Huawei signature !
When you check > fastboot oem get-bootinfo :
if you will see < waitng for device > : you should uninstall this driver with yellow triangle from Device Manager " android sooner single adb interface " and reconnect device in fastboot mode !
Click to expand...
Click to collapse
So basically the update did nothing? Appearantly the chinese already made a recovery that they call a "true recovery" probably overwrites the built-in recovery in the recovery.img, which I believe should be able to flash everything without the need for a signature from hw
tauio111 said:
So basically the update did nothing? Appearantly the chinese already made a recovery that they call a "true recovery" probably overwrites the built-in recovery in the recovery.img, which I believe should be able to flash everything without the need for a signature from hw
Click to expand...
Click to collapse
To be able to flash recovery.img on /recovery partition you need a signed image ! ... so it seems that they managed to sign this recovery image ...
But the question is : can we rewrite this recovery images ? or maybe we will have access to the second partition recovery ....
tauio111 said:
So basically the update did nothing? Appearantly the chinese already made a recovery that they call a "true recovery" probably overwrites the built-in recovery in the recovery.img, which I believe should be able to flash everything without the need for a signature from hw
Click to expand...
Click to collapse
That recovery was supposedly used for the unlocked Honor 3.
The following is the post by Riyou:
update from the official journal of view, B118 changes are not large, in fact, B118 has allowed unsigned mirror normal programming (ie our own modified boot. img, recovery.img, not after Huawei signed a special tool for image files), you can create a real civil society after the recovery or any modified boot.img, and for the sentence we are easy to understand, then it is already unlocked P6 B118 BL (actually no lock from the beginning, just to do a signature image file checksum)
Well, the first thing to "unlock BL" is produced after a third-party recovery, I have tested the glory of 3 recovery available (author ATX Team Dragon big stars), I tested the Unicom version, mobile and telecom version not yet measured, guess available
Note: Brush recovery on the premise that you must brush B118, best brush complete package
http://bbs.anzhi .com/thread-8579732-1-1.html
Click to expand...
Click to collapse
Source
And he linked his post to this:
Posts by big stars at 2013-11-29 16:20 edit
this to recovery, version 3 Huawei glory first true sense: CWM 6.0.4.5, truly unlimited Brush officially entered the era
2013.11.29 16: 00 Again update:
1, corrected version v2 data can not boot after clearing the problem (is unique because of Huawei cust partition)
Note: If you have now is not switched on, in the off state, press the volume + volume down + power, the phone will enter my v2 version recovery. And then manually copy the Honor3_Recovery-v3.zip to TF card, brush will enter into the new version of the recovery. This method applies only to situations brush after clearing data recovery v2 version unbootable.
2, v2 version can not directly fix problems with my brush MIUI complete package.
2013.11.29 update:
1, fix the problem can not enter shutdown mode charging
Precautions (deadline 2013.11.28):
1, bottom package must be 118, so that is unlocked, otherwise inaccessible recovery after the brush into the exe
2, provided is a key tool for the implementation of the windows you can double-click 3, before the individual is not fit for MIUI use this recovery (of course, a complete package can use this to brush in.), with particular attention off charging instructions: http:// bbs.anzhi.com/thread-8581168-1-1.html download (can not boot off charge after correction and wipe):
This post hidden content
Honor3_Recovery-v3. EXE : Link: http://pan.baidu.com/s/1eQH8w Password: xhvb
Honor3_Recovery-v3. ZIP : Link: http://pan.baidu.com/s/17WVVK Password: 5mm8
Click to expand...
Click to collapse
Source
alex61194 said:
I loss my conection with 3g and toggles too
Click to expand...
Click to collapse
I lost my toggles in the notification bar too, after flashing from the bootloader.
Sent from my HUAWEI P6
Hi guys,
Since today Huawei delivers the open sourcecode for the drivers, I guess.
Anyone in here capable to create a nice clean AOSP ROM or anything else good for our tablet?
Search link for LTE version:
http://m.huawei.com/enmobile/consum...roid=M2-A01L&proKey=Tablets_T/Tablets/M2-A01L
Direct download for LTE version:
http://download-c.huawei.com/downlo...oadId=89345&version=347349&siteCode=worldwide
Search link for WiFi version:
http://m.huawei.com/enmobile/consum...roid=M2-A01w&proKey=Tablets_T/Tablets/M2-A01w
Direct download for WiFi version:
http://download-c.huawei.com/downlo...oadId=89346&version=347353&siteCode=worldwide
I do not have the experience with ROM building, forking, ... etc. here.
One good room would be good.
Edit. Nevermind
Anyone with the LTE version of this can you upload to a cloud link so that I can download? I would rather not waste my time having to send an email to [email protected] just to get it. Thanks
Huawei Open Source Released
Hey,
maybe it is late, i have found the open source.
the link: consumer.huawei.com/en/opensource/
and we can find m2-a01l in the tablet part, and it is on page 4.
Emm...i dont know how many people use this tablet because it is out of date.:laugh:
and i dont know if it is everything we want
whatareyou007 said:
Huawei Open Source Released
Hey,
maybe it is late, i have found the open source.
the link: consumer.huawei.com/en/opensource/
and we can find m2-a01l in the tablet part, and it is on page 4.
Emm...i dont know how many people use this tablet because it is out of date.:laugh:
and i dont know if it is everything we want
Click to expand...
Click to collapse
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Crypto18 said:
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Click to expand...
Click to collapse
Hi! Have you able to develop for our poor table? 1 stable ROM should be enough
and0ng said:
Hi! Have you able to develop for our poor table? 1 stable ROM should be enough
Click to expand...
Click to collapse
The only problem in this moment still remain unlocking bootloader. I'm searching solutions
Crypto18 said:
The only problem in this moment still remain unlocking bootloader. I'm searching solutions
Click to expand...
Click to collapse
Yeah it's a pain to unlock the bootloader. But since I need to install Google Workspace device policy I have no other option
@Crypto18 - There is a possibilty to unlock the bootloader by using dc-unlocker - amount about 4 Euro. I had success in doing so a year ago. It would be very nice to get an AOSP-ROM für the tablet.
I think, I unlocked it with dc-unlocker, too, four years ago or so.
I would be happy to have any clean/empty/fresh AOSP ROM for this tablet, as up to today it is still fast and really usable.
If you need any help, I would also be eager to learn how to do it (building a ROM). @Crypto18
Crypto18 said:
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Click to expand...
Click to collapse
I did the DC-unlocker thing today as described in the sticky, so it still works. Somebody in this thread mentioned that it worked for him without the OEM unlock option (it disappeared in EMUI 4), but to be on the safe side I had done a downgrade to EMUI 3 before (the oldest one I found didn't have a working dialer, I didn't try the landscape calculator trick to activate the manufacturere mode, but updated to a later EMUI 3 version that had a a working dialer: "Huawei MediaPad M2-801L Android 5.1.1 EMUI 3.1 B007.zip").
I am now looking for a working TWRP (see my post in the sticky thread a few minutes ago).
If you manage to unlock your bootloader, I would be willing to go the "build your own version from scratch" way with you. I have experience as embedded Linux developer one decade ago, but never did it for Android. Would be more fun to have a second person interested in this "classic" tablet.
@coocooc , @Crypto18 ,
Have you made any progress with developing a custom rom?
@coocooc - Please search for "TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img" in TWRP. That's the TWRP you're looking for.
rotter99 said:
@coocooc , @Crypto18 ,
Have you made any progress with developing a custom rom?
Click to expand...
Click to collapse
Crypto18 so far did not come back, and I didn't start the journey yet.
I am on the way to prepare a Linux laptop for building Android and SBC stuff, but family life does not allow to spend many hours on my pet projects.
I wrote a mail to Huawei to get the latest sources (EMUI 4), but the first level support shown on their GPL site couldn't fulfill the wish. They gave me a developer address to apply to; let's see how this ends.
gelrav said:
@coocooc - Please search for "TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img" in TWRP. That's the TWRP you're looking for.
Click to expand...
Click to collapse
Thanks for the hint! I will try this TWRP version tonight. Which EMUI version are you using with this TWRP (EMUI 3 or 4)? Is there something to check in the flash layout first, to succeed with this TWRP?
@coocooc - I'm using a Huawei Mediapad M2 10.W with Emui 3.1., Android 5.1.1.
If you're on Mediapad 801L, the above mentioned TWRP will not work for you!
I am using “TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img“ om my M2-A01W and it working without any problems.
gelrav said:
@coocooc - I'm using a Huawei Mediapad M2 10.W with Emui 3.1., Android 5.1.1.
If you're on Mediapad 801L, the above mentioned TWRP will not work for you!
Click to expand...
Click to collapse
@gelrav Oh that might be the reason for my problems as I do use the 801L version. What alternative TWRP ist available then?
coocooc said:
@gelrav Oh that might be the reason for my problems as I do use the 801L version. What alternative TWRP ist available then?
Click to expand...
Click to collapse
Funny, the name of the TWRP file suggests that it is valid for both the L and the W versions of the M2-A01.
What is exactly the problem with this file?
I unlocked both the phone und FRP on my device before installing this file.
I am on EMUI 3.1. and Android 5.1.1.
@coocooc
Maybe this link can help you getting further:
Downloads for : Huawei -All-General-Generic- | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update - ("V. 6")
I have merged my threads. Please look here:
https://forum.xda-developers.com/ma...mate-8-nxt-t3677961/post73901232#post73901232
ChinHon said:
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582
- Custom System Update - ("V.6")
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582/592.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU. zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
Hint:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Click to expand...
Click to collapse
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
jbmc83 said:
you da man
Sent from my HUAWEI NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
This rom is going really well. Especially Xposed. I haven't been able to get it that stable yet. I'm really glad I finally made it.
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
me
nikolas60 said:
me
Click to expand...
Click to collapse
Do you know what it's about? The link is for developers only.
ChinHon said:
@jbmc83
I now have the link of the v2 you are looking for. Still interested?
Click to expand...
Click to collapse
sure thing, lets have it that would be the HRT v2 right? would i be qualified for the link tho? im not a dev either
Sent from my HUAWEI NXT-AL10 using Tapatalk
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
ChinHon said:
Everyone who works on a rom is a developer!
Here the link friends.
https://pan.baidu.com/s/1bpJGYyb
It's not HRT. Should be better. Look closely at the zip, could have subdirectories.
Click to expand...
Click to collapse
ah yes, i remember that one! actually have it already, you had provided a link before still, thanks for your trouble!
apparently, there is a new chinese B593 out, although the full stock versions provided on firmware finder are not approved for installation, unfortunately... so they cant be flashed properly. still, nice to see development continuing
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
ChinHon said:
I'll continue, of course, because it's questionable whether we get oreo.
Has someone successfully installed my update on another region?
Please let us know.
Click to expand...
Click to collapse
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
jbmc83 said:
could get interesting next spring, maybe well have another shot at oreo then... still wondering what the heck @c|nder was up to with this thread here
https://forum.xda-developers.com/mate-8/orig-development/oreo-rom-1-0-mate-8-south-america-t3702767
Click to expand...
Click to collapse
How to make new roms when you can't get to the baidu downloads anymore?
ChinHon said:
How to make new roms when you can't get to the baidu downloads anymore?
Click to expand...
Click to collapse
question is rather: how to make new roms if there arent any new firmwares being developed officially?
Sent from my HUAWEI NXT-AL10 using Tapatalk
Yeah, that's an aspect too. Making a new rom after every update is somehow unproductive. Just because of the google patch? I only made my update because of the stable xposed. I only make new ones in the future if something fundamentally changes.
Any news about oreo guys?[emoji848]
.....
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
aaron13 said:
Wow this is great work, how about the data? Is it decrypted with this method?
(sorry for the noob question)
Click to expand...
Click to collapse
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
ChinHon said:
Thank you.
My rom is not encrypted. It also replaces only the boot and system partitions.
Since data remains unaffected, nothing changes. It remains as it was before installation.
Click to expand...
Click to collapse
But it is rooted so titanium can be used?
aaron13 said:
But it is rooted so titanium can be used?
Click to expand...
Click to collapse
Yes!
Go with all my roms.
Hi guys!!!
Like the title said i have and Redmi Note 8 PRO with android 10 and i want root it....
I have tryed many guides without success so i have downgrade my phone to android 9....
Its possible to root in both android 9 and android 10???
If yes can you give me both guides???
also witch is better to have adroid 9 or 10????
please help me is over 2 weeks im try without success...
SonXiaomi89 said:
hi ! You can root redmi note 8 pro Magisk in ROM EU !
Click to expand...
Click to collapse
U tell me something that i already know....
My question was how i can??? i looking for a guide.
roberto_1986 said:
Hi guys!!!
Like the title said i have and Redmi Note 8 PRO with android 10 and i want root it....
I have tryed many guides without success so i have downgrade my phone to android 9....
Its possible to root in both android 9 and android 10???
If yes can you give me both guides???
also witch is better to have adroid 9 or 10????
please help me is over 2 weeks im try without success...
Click to expand...
Click to collapse
Greetings @roberto_1986,
Your choice between A9 and A10 will summarize easily. Do you need one of the new features provided on A10 which was not present on A9 version? If you do not know or if you are not sure, then you dont need A10, stick to A9 for now. Less bugs, better performance and battery life. OS is more mature.
Now regarding rooting, on A9 Rom nothing as easy as pressing the root button under the LR TWRP (1104 version for A9 1210 for A10), then pressing the Closing AVB 2.0 button and you are done. From there you can update to latest stable version within the OS (do not use the beta ones, no point using those and it did not work for me). Works like a charm. I am on MIUI 11.0.2.0 (A9) EEA and never had any kind of issues using this method a few times. I never tried the A10 version of the LR TWRP so I have no idea if they offer the same option for rooting on A10 or not.
You can also unroot from that same LR TWRP in case that would be required at some point.
Hope this helps.
Muad.Dib said:
Greetings @roberto_1986,
Your choice between A9 and A10 will summarize easily. Do you need one of the new features provided on A10 which was not present on A9 version? If you do not know or if you are not sure, then you dont need A10, stick to A9 for now. Less bugs, better performance and battery life. OS is more mature.
Now regarding rooting, on A9 Rom nothing as easy as pressing the root button under the LR TWRP (1104 version for A9 1210 for A10), then pressing the Closing AVB 2.0 button and you are done. From there you can update to latest stable version within the OS (do not use the beta ones, no point using those and it did not work for me). Works like a charm. I am on MIUI 11.0.2.0 (A9) EEA and never had any kind of issues using this method a few times. I never tried the A10 version of the LR TWRP so I have no idea if they offer the same option for rooting on A10 or not.
You can also unroot from that same LR TWRP in case that would be required at some point.
Hope this helps.
Click to expand...
Click to collapse
Ty for your answer!
TWRP TWRP 3.4.0-0 its going to work on A10?
also can u kink to me the turorial for root both android version??? ty so much.
roberto_1986 said:
Ty for your answer!
TWRP TWRP 3.4.0-0 its going to work on A10?
also can u kink to me the turorial for root both android version??? ty so much.
Click to expand...
Click to collapse
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Muad.Dib said:
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Click to expand...
Click to collapse
ty so much!
im tryed to root A10 and got bootloop again.....im broke so i think i will go back to A9 like u said!
i will try and let u know.
Muad.Dib said:
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Click to expand...
Click to collapse
Finaly i have downgraded to android 9....
now im little bit confused.....
i can install directly the last twrp for my phone from this site???----> https://unofficialtwrp.com/twrp-3-3-1-root-redmi-note-8-pro-begonia/
usualy im never install something that are upload from someone that idk who is...
im waiting your answer then i will flash it ty again for your support.
roberto_1986 said:
Finaly i have downgraded to android 9....
now im little bit confused.....
i can install directly the last twrp for my phone from this site???----> https://unofficialtwrp.com/twrp-3-3-1-root-redmi-note-8-pro-begonia/
usualy im never install something that are upload from someone that idk who is...
im waiting your answer then i will flash it ty again for your support.
Click to expand...
Click to collapse
That's very wise not to install stuff you find from internet from unknown sources.
Not sure how you found that website, but I never heard of it or even seen it for the matter. I would not consider it safe myself.
I used to be able to download stuff from MiFirm which *looked* more legit but who knows.
You can find the required files from the xda threads I posted above, it may come from individuals, but I do consider it safer somehow because we have feedback from xda users. Back then when we installed those unofficial version there were not official support of any kind anyway so we kind of had to be 'advanturous'. I dont even remember from where I got mine myself.
Best I can do for you is to provide you with the checksums of the file I did use to root my A9 and reflashed not so long ago.
Code:
$ md5sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
e41bba28984f14ea56da98448cd2c17d *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
$ sha256sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
8f203aec69f1ed021badac0f94d1906fcf0530f0e41beddcbc49652705c8731b *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
This way whatever source you are getting the file from you'll be able to check it against my sums which will guarantee you got the same version I did use. However I cannot guarantee they are 'legit'.
Before you proceed any further, I want to stress you never told me the flavor of the phone you own. Mine is Global EU phone flavor running an original stock MIUI.11.0.2.0_A9_PGGEUXM. If own a Chinese flavor (ordered on Alibaba, Aliexpress etc etc) you need to be extra cautious for example as they tend to brick more from what I read.
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post. If you restored to stock image using MiFlash or SP Flash Tools it is very likely you need to reapply those even if you did it before. Best to apply them twice than none.
Hope this helps.
Muad.Dib said:
That's very wise not to install stuff you find from internet from unknown sources.
Not sure how you found that website, but I never heard of it or even seen it for the matter. I would not consider it safe myself.
I used to be able to download stuff from MiFirm which *looked* more legit but who knows.
You can find the required files from the xda threads I posted above, it may come from individuals, but I do consider it safer somehow because we have feedback from xda users. Back then when we installed those unofficial version there were not official support of any kind anyway so we kind of had to be 'advanturous'. I dont even remember from where I got mine myself.
Best I can do for you is to provide you with the checksums of the file I did use to root my A9 and reflashed not so long ago.
Code:
$ md5sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
e41bba28984f14ea56da98448cd2c17d *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
$ sha256sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
8f203aec69f1ed021badac0f94d1906fcf0530f0e41beddcbc49652705c8731b *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
This way whatever source you are getting the file from you'll be able to check it against my sums which will guarantee you got the same version I did use. However I cannot guarantee they are 'legit'.
Before you proceed any further, I want to stress you never told me the flavor of the phone you own. Mine is Global EU phone flavor running an original stock MIUI.11.0.2.0_A9_PGGEUXM. If own a Chinese flavor (ordered on Alibaba, Aliexpress etc etc) you need to be extra cautious for example as they tend to brick more from what I read.
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post. If you restored to stock image using MiFlash or SP Flash Tools it is very likely you need to reapply those even if you did it before. Best to apply them twice than none.
Hope this helps.
Click to expand...
Click to collapse
mine is EEA so eurpean version!
also talk me about "Anti-Brick solution" ty
ans i read that the thread u link to me was copy/paste from another thread that is only for china version???
is working for EU too?
also when u bootloop is brick or something like that?
Muad.Dib said:
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post.
Hope this helps.
Click to expand...
Click to collapse
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
how do u brick redmi note 8 pro????
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
Ty i have installed TWR and now i am here ---> - then go to system_root > system and delete "recovery-from-boot.p"
but i cannot find this file why???
well nvm finaly i have rooted my phone ty so much!!!
roberto_1986 said:
mine is EEA so eurpean version!
also talk me about "Anti-Brick solution" ty
Click to expand...
Click to collapse
The Megathread is pretty much self explanatory for the Anti-Brick method, I cannot explain it any better than how it is explain there. Please refer to the link given in one of my previous posts and just apply the first part with flashing preloader.bin and lk.img as explained.
It will basically provide you with a safety belt in case you do anything wrong with your phone on A9 resulting in bricking the device, bootloop or whatever, so you can Flash stock back on using MiFlash / SP Flash Tool without having to need an authorized account.
roberto_1986 said:
Ty i have installed TWR and now i am here ---> - then go to system_root > system and delete "recovery-from-boot.p"
but i cannot find this file why???
Click to expand...
Click to collapse
This file might not be there, it is a file you have to delete to prevent OS to restore Mi Recovery 3 over your TWRP at reboot (making impossible to have TWRP stick on the phone).
In order to see that file you first need to mount 'system' in the options but as I said it is not always there.
roberto_1986 said:
well nvm finaly i have rooted my phone ty so much!!!
Click to expand...
Click to collapse
Glad I could help! Sharing the bits of knowledge we have here and here is the best thing in the world, bits of knowledge are only worth something if shared with someone else yeah!
Now that you are rooted dont mess up with your phone eh!
---------- Post added at 10:47 ---------- Previous post was at 10:22 ----------
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
As I said earlier, I have no experience in A10 (Q) problems as I am not willing to jump in there staying on A9 (P).
A10 benefits is not worth the risks to me. The Anti-brick method is well explained in the Megathread I posted the link few posts earlier, however, it's for A9 only not A10.
Looking at the lists of bugs still present on A10, I really see no point running A10 atm. But well anyone does what pleases him/her he he
Good Luck!
Muad.Dib said:
The Megathread is pretty much self explanatory for the Anti-Brick method, I cannot explain it any better than how it is explain there. Please refer to the link given in one of my previous posts and just apply the first part with flashing preloader.bin and lk.img as explained.
It will basically provide you with a safety belt in case you do anything wrong with your phone on A9 resulting in bricking the device, bootloop or whatever, so you can Flash stock back on using MiFlash / SP Flash Tool without having to need an authorized account.
This file might not be there, it is a file you have to delete to prevent OS to restore Mi Recovery 3 over your TWRP at reboot (making impossible to have TWRP stick on the phone).
In order to see that file you first need to mount 'system' in the options but as I said it is not always there.
Glad I could help! Sharing the bits of knowledge we have here and here is the best thing in the world, bits of knowledge are only worth something if shared with someone else yeah!
Now that you are rooted dont mess up with your phone eh!
---------- Post added at 10:47 ---------- Previous post was at 10:22 ----------
As I said earlier, I have no experience in A10 (Q) problems as I am not willing to jump in there staying on A9 (P).
A10 benefits is not worth the risks to me. The Anti-brick method is well explained in the Megathread I posted the link few posts earlier, however, it's for A9 only not A10.
Looking at the lists of bugs still present on A10, I really see no point running A10 atm. But well anyone does what pleases him/her he he
Good Luck!
Click to expand...
Click to collapse
I noticed that my cts profile is set to false....how to get this file true???
roberto_1986 said:
I noticed that my cts profile is set to false....how to get this file true???
Click to expand...
Click to collapse
It used to pass before, at least it was when I first installed it. Then google made some updates and it is not passing anymore. I am not an expert about that, but I know there are some threads where people are talking about this particular thing.
What is it useful for?
Muad.Dib said:
It used to pass before, at least it was when I first installed it. Then google made some updates and it is not passing anymore. I am not an expert about that, but I know there are some threads where people are talking about this particular thing.
What is it useful for?
Click to expand...
Click to collapse
certain game not working with the root thats why is important to have both profile setted to true!
so u too the first time got this cts profile to false and now is to true?
also when 1 profile is false mean something its gone wrong so i want to fix it
roberto_1986 said:
certain game not working with the root thats why is important to have both profile setted to true!
so u too the first time got this cts profile to false and now is to true?
Click to expand...
Click to collapse
roberto_1986 said:
also when 1 profile is false mean something its gone wrong so i want to fix it
Click to expand...
Click to collapse
I see.
No actually it was the other way around. When I first rooted in Feb it was passing both tests (green true).
Then one day after google made its changes it stopped working. But I only retro-graming so it is not so important for me.
Have you tried MagiskHide for the games you want to play with?
I cannot really help you with this further because I never tried to fix these myself not really needing to.
Anyway if you search Redmi Note 8 Pro forums you will see some other people are having the issue, at first I thought it was a A10 problem but probably is with the device.
Also you may found help in the telegram group REDMI NOTE 8 PRO OFFICIAL many gamers there I think.
Good luck and please let us know of your findings.
Muad.Dib said:
I see.
No actually it was the other way around. When I first rooted in Feb it was passing both tests (green true).
Then one day after google made its changes it stopped working. But I only retro-graming so it is not so important for me.
Have you tried MagiskHide for the games you want to play with?
I cannot really help you with this further because I never tried to fix these myself not really needing to.
Anyway if you search Redmi Note 8 Pro forums you will see some other people are having the issue, at first I thought it was a A10 problem but probably is with the device.
Also you may found help in the telegram group REDMI NOTE 8 PRO OFFICIAL many gamers there I think.
Good luck and please let us know of your findings.
Click to expand...
Click to collapse
well ty so much for everything u are awesome guy!
Hello All,
It has been a while since I have been around the XDA forums, needless to say I needed a new user! haha. I used to run custom ROMs on older Samsung devices, but got out of the game when I could never pass safetynet. Needless to say, I have now stepped into the world of OnePlus, and so far I am impressed! I managed to snag a 9 Pro for a good price, but it is the Chinese version (Needed dual-SIM), meaning it came with Color OS.
I have already managed to "Downgrade" the Color OS to Oxygen OS using another thread here. Worked flawlessly other then the IEMI...It's currently on 11.2.2.2DA.
Is there anyone that has managed to swap from 11.2.2.2DA to BA? I don't really want to root at this moment (maybe ill get into that at a later date)
I do have an OTA file for 11.2.2.2BA but when I use the local update, it just says it can't upgrade to a lower version.
Any ideas?
Natester769 said:
Hello All,
It has been a while since I have been around the XDA forums, needless to say I needed a new user! haha. I used to run custom ROMs on older Samsung devices, but got out of the game when I could never pass safetynet. Needless to say, I have now stepped into the world of OnePlus, and so far I am impressed! I managed to snag a 9 Pro for a good price, but it is the Chinese version (Needed dual-SIM), meaning it came with Color OS.
I have already managed to "Downgrade" the Color OS to Oxygen OS using another thread here. Worked flawlessly other then the IEMI...It's currently on 11.2.2.2DA.
Is there anyone that has managed to swap from 11.2.2.2DA to BA? I don't really want to root at this moment (maybe ill get into that at a later date)
I do have an OTA file for 11.2.2.2BA but when I use the local update, it just says it can't upgrade to a lower version.
Any ideas?
Click to expand...
Click to collapse
You have to wait for the next version.
excute this command and you can install the BA vesion package on DA 11.2.2.2
Q: How do I switch to Europe or Global OS?
A: Wait for the new version, download the #Full package and Local Update it. If you have Magisk installed, you can try to Local Update after entering the following command (need ROOT access).
resetprop ro.build.date.utc 1400000000
resetprop ro.system.build.date.utc 1400000000
Wait for coloros to oxygenos step
Thanks for the quick replies,
It appears everything ColorOS wise always points towards the Indian Edition. Not that it isn't stable or anything, I think the UK Version covers more radio bands which may work better here in NA. I was under the impression once I am on OOS, I am no longer tied to anything COS...
I see that 11.2.3 is available as an OTA update, but I don't see any links yet. My history with rooting and roms was that I could always change to the same version or higher, just never lower. I'm doing this in my case, but maybe that is changed with Oneplus where it wants to see higher only.
I will just wait till a link for 11.2.3 is available from OTA and go from there!
Thanks.
Hello all,
As the 11.2.3.3 OTA update came out for BA today, I tried to perform a local update to get it to BA.
Looks like everything went great. IEMI is still broken due to the COS to OS swap, but it isn't really concerning to me at the moment. I have backups of the original so I should be good.
Just posting to let anyone who reads know!
Actaurian said:
excute this command and you can install the BA vesion package on DA 11.2.2.2
Q: How do I switch to Europe or Global OS?
A: Wait for the new version, download the #Full package and Local Update it. If you have Magisk installed, you can try to Local Update after entering the following command (need ROOT access).
resetprop ro.build.date.utc 1400000000
resetprop ro.system.build.date.utc 1400000000
Click to expand...
Click to collapse
Do you mean going into fastboot, and entering these commands, and then subsequently rebooting into system, and then try and local upgrade? Please be clear with these steps and descriptions.
Actaurian said:
执行此命令，即可在DA 11.2.2.2上安装BA vesion软件包。
问：如何切换到欧洲或全球操作系统？
答：等待新版本，下载#Full软件包并对其进行本地更新。如果安装了Magisk，则可以在输入以下命令（需要ROOT访问权限）后尝试进行本地更新。
resetprop ro.build.date.utc 1400000000
resetprop ro.system.build.date.utc 1400000000
Click to expand...
Click to collapse
Ťthanks!
Natester769 said:
Hello All,
It has been a while since I have been around the XDA forums, needless to say I needed a new user! haha. I used to run custom ROMs on older Samsung devices, but got out of the game when I could never pass safetynet. Needless to say, I have now stepped into the world of OnePlus, and so far I am impressed! I managed to snag a 9 Pro for a good price, but it is the Chinese version (Needed dual-SIM), meaning it came with Color OS.
I have already managed to "Downgrade" the Color OS to Oxygen OS using another thread here. Worked flawlessly other then the IEMI...It's currently on 11.2.2.2DA.
Is there anyone that has managed to swap from 11.2.2.2DA to BA? I don't really want to root at this moment (maybe ill get into that at a later date)
I do have an OTA file for 11.2.2.2BA but when I use the local update, it just says it can't upgrade to a lower version.
Any ideas?
Click to expand...
Click to collapse
Hi, I have an OP9 Pro China version with Color OS and I also want to flash it to Oxygen OS. The Color OS version of my OP9 Pro was upgraded to A.04 version. Please advise if I can flash my phone to 11.2.2.2DA. I am not sure if 11.2.2.2DA is the higher version or not (compared with Color OS A.04). Please also advise if you followed the instructions from the post on OP Chinese forum to flash your 9 pro to 11.2.2.2DA, then use the same method to flash it to 11.2.2.3BA. Have you tried to flash your 9 pro to the AA global version? Sorry for so many questions. I haven't flash ROM since OP3T and I forget how it works. Thanks.
waiwaifong said:
Hi, I have an OP9 Pro China version with Color OS and I also want to flash it to Oxygen OS. The Color OS version of my OP9 Pro was upgraded to A.04 version. Please advise if I can flash my phone to 11.2.2.2DA. I am not sure if 11.2.2.2DA is the higher version or not (compared with Color OS A.04). Please also advise if you followed the instructions from the post on OP Chinese forum to flash your 9 pro to 11.2.2.2DA, then use the same method to flash it to 11.2.2.3BA. Have you tried to flash your 9 pro to the AA global version? Sorry for so many questions. I haven't flash ROM since OP3T and I forget how it works. Thanks.
Click to expand...
Click to collapse
I basically followed this guide on getting COS to OOS. https://www.oneplusbbs.com/thread-5895784-1.html. I believe I was on version A.03 when I did the update, but I could have been on A.04. It was as easy as downloading the right firmware and applying it via a local update. It brought me right to 11.2.2.2DA. *This does seem to break IEMI*
I then used the 11.2.2.3BA version downloaded right from XDA, and applied it via a local update.
I have not gone to global as I need dual SIM. So I can't help you there....
Natester769 said:
I basically followed this guide on getting COS to OOS. https://www.oneplusbbs.com/thread-5895784-1.html. I believe I was on version A.03 when I did the update, but I could have been on A.04. It was as easy as downloading the right firmware and applying it via a local update. It brought me right to 11.2.2.2DA. *This does seem to break IEMI*
I then used the 11.2.2.3BA version downloaded right from XDA, and applied it via a local update.
I have not gone to global as I need dual SIM. So I can't help you there....
Click to expand...
Click to collapse
Thanks for your detailed reply. Will try soon.