Code:
[COLOR="Blue"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on ether
Download link:
LineageOS Downloads
Official root addon
LineageOS Extras
Changelog:
Changes for ether
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to javelinanddart
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS 15.1 for Nextbit Robin (ether), ROM for the Nextbit Robin
Contributors
javelinanddart
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-08-21
Last Updated 2018-08-21
javelinanddart said:
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below...
Click to expand...
Click to collapse
Great work Thanks !!!
Finally ETA for LOS 15.1 will stop , now it would look like that :
When LOS 16 plz .....
Seriously , good work :highfive:
Does it means you are the new maintainer ?
RaiZProduction said:
Great work Thanks !!!
Finally ETA for LOS 15.1 will stop , now it would look like that :
When LOS 16 plz .....
Seriously , good work :highfive:
Does it means you are the new maintainer ?
Click to expand...
Click to collapse
Yes, although if you'd bothered to check, that information is on the wiki...
Also, Lineage 15.1 has existed for a long long time (since March, iirc). All of my unofficial builds were public.
This rom is going good thus far, is there a way to re-enable the big cpu clusters because im a gamer and i dont want any lags
Well done and thank you
Just flashed this and so far so good -- works very smoothly and enjoying the new Oreo interface enhancements. THANKS!
Screen won't always turn on when pressing the power button
brendonla said:
Just flashed this and so far so good -- works very smoothly and enjoying the new Oreo interface enhancements. THANKS!
Click to expand...
Click to collapse
Update 8/24: Having screen issues now - when the screen is off and I press the power button to turn on the screen, it doesn't turn on all the time.
Subjectively speaking, it feels like this happens 50-60% of the time. Not sure if it's my device or the finger print reader or what (I was on the latest nightly build of 14.1 and this didn't happen).
I did a clean install (wiped the device and then flashed the ROM, gapps, Magisk and rebooted.
I'll give it another day or so to see if this changes, but wondering if anyone else has this issue.
Otherwise like the performance. Very smooth UI response time.
i cleaned flashed & am stuck at " Adding the finishing touches" screen.
have redownloaded flashed the rom & a day older gapps nano.
still the same any ideas?
brendonla said:
Update 8/24: Having screen issues now - when the screen is off and I press the power button to turn on the screen, it doesn't turn on all the time.
Subjectively speaking, it feels like this happens 50-60% of the time. Not sure if it's my device or the finger print reader or what (I was on the latest nightly build of 14.1 and this didn't happen).
I did a clean install (wiped the device and then flashed the ROM, gapps, Magisk and rebooted.
I'll give it another day or so to see if this changes, but wondering if anyone else has this issue.
Otherwise like the performance. Very smooth UI response time.
Click to expand...
Click to collapse
I never faced this problem
---------- Post added at 04:39 AM ---------- Previous post was at 04:39 AM ----------
iluvatrix said:
i cleaned flashed & am stuck at " Adding the finishing touches" screen.
have redownloaded flashed the rom & a day older gapps nano.
still the same any ideas?
Click to expand...
Click to collapse
What version of twrp are you using to flash it?
oshane126(jamaican) said:
I never faced this problem
---------- Post added at 04:39 AM ---------- Previous post was at 04:39 AM ----------
What version of twrp are you using to flash it?
Click to expand...
Click to collapse
3.2.3.0
i used opengapps stock & was able to set up but now have problem with the stock google camera refusing to open
iluvatrix said:
3.2.3.0
i used opengapps stock & was able to set up but now have problem with the stock google camera refusing to open
Click to expand...
Click to collapse
Oh I used nano
oshane126(jamaican) said:
Oh I used nano
Click to expand...
Click to collapse
i used Nano at first but was stuck at " Adding the finishing touches" screen.
brendonla said:
Update 8/24: Having screen issues now - when the screen is off and I press the power button to turn on the screen, it doesn't turn on all the time.
Subjectively speaking, it feels like this happens 50-60% of the time. Not sure if it's my device or the finger print reader or what (I was on the latest nightly build of 14.1 and this didn't happen).
I did a clean install (wiped the device and then flashed the ROM, gapps, Magisk and rebooted.
I'll give it another day or so to see if this changes, but wondering if anyone else has this issue.
Otherwise like the performance. Very smooth UI response time.
Click to expand...
Click to collapse
Have you applied the Lock Clean overlay?
oshane126(jamaican) said:
Oh I used nano
Click to expand...
Click to collapse
please let me know the exact date of the nano you used so i can try , thanks
---------- Post added at 13:41 ---------- Previous post was at 13:39 ----------
oshane126(jamaican) said:
Oh I used nano
Click to expand...
Click to collapse
which date nano you used? let me try the exact one you used. thanks
---------- Post added at 13:42 ---------- Previous post was at 13:41 ----------
oshane126(jamaican) said:
Oh I used nano
Click to expand...
Click to collapse
which date nano you used? let me try the exact one you used. thanks
iluvatrix said:
i cleaned flashed & am stuck at " Adding the finishing touches" screen.
have redownloaded flashed the rom & a day older gapps nano.
still the same any ideas?
Click to expand...
Click to collapse
iluvatrix said:
please let me know the exact date of the nano you used so i can try , thanks
---------- Post added at 13:41 ---------- Previous post was at 13:39 ----------
which date nano you used? let me try the exact one you used. thanks
---------- Post added at 13:42 ---------- Previous post was at 13:41 ----------
which date nano you used? let me try the exact one you used. thanks
Click to expand...
Click to collapse
Please use either of the following:
MindTheGapps, from http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm64-20180808_153856.zip
Open GApps nano from August 19th or earlier. (or any OpenGApps variant, as long as the dialer doesn't get replaced with Google Dialer)
Latest versions of the Google Setup Wizard seem to be buggy and crash repeatedly. MindTheGapps is from August 8th, so it's still using a version of the Setup Wizard that doesn't crash, and based from the Omnirom Telegram chat, someone had success with Open GApps, August 19th build.
Are you guys using official TWRP & 3230 or 3220? Or twrp that is linked in the opening Post?
iluvatrix said:
Are you guys using official TWRP & 3230 or 3220? Or twrp that is linked in the opening Post?
Click to expand...
Click to collapse
I'm using the TWRP linked in the LineageOS wiki. The offiical TWRP builds use a device tree that hasn't been updated since Android Marshmallow, and the UI is laggy to hell and back. This is not the case in the unofficial one from the Lineage wiki.
iluvatrix said:
please let me know the exact date of the nano you used so i can try , thanks
---------- Post added at 13:41 ---------- Previous post was at 13:39 ----------
which date nano you used? let me try the exact one you used. thanks
---------- Post added at 13:42 ---------- Previous post was at 13:41 ----------
which date nano you used? let me try the exact one you used. thanks
Click to expand...
Click to collapse
August 22
---------- Post added at 07:07 PM ---------- Previous post was at 07:03 PM ----------
iluvatrix said:
Are you guys using official TWRP & 3230 or 3220? Or twrp that is linked in the opening Post?
Click to expand...
Click to collapse
I used version 3230
TheC92 said:
Have you applied the Lock Clean overlay?
Click to expand...
Click to collapse
Nope. Not sure what that even is.
I'm going to rewipe and reflash the ROM, gapps nano and Magisk again and see if the problem still occurs.
I really like this ROM, so hoping a fresh install might do the trick.
I'm on TWRP 3220. I'll try installing the TWRP in the original post.
FBE?
Hi javelinanddart, thanks for continuing your work on maintaining LOS for the Robin.
Question: is it feasible to implement file-based encryption on this device? Thanks!
brendonla said:
Nope. Not sure what that even is.
I'm going to rewipe and reflash the ROM, gapps nano and Magisk again and see if the problem still occurs.
I really like this ROM, so hoping a fresh install might do the trick.
I'm on TWRP 3220. I'll try installing the TWRP in the original post.
Click to expand...
Click to collapse
OK, so I upgraded to latest TWRP 3230, wiped, reflashed the ROM, gapps, and Magisk: reinstalling my apps from my last backup now, but so far the power button turns the screen back on without any issues.
Thanks again for your efforts on this ROM.
Related
Full Advance 4.4.2
Samsung Galaxy S (i9000)
Full Advance is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Full Advance does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on unofficial builds is the leading
* cause of male impotence.
*/
Installation Instructions
- Coming from 4.4 or less ROMS
Download Full Advance-XXXXXXXX.zip to your phone
Boot into Recovery
Wipe all your data (System/Data/Dalvik Cache)
Flash Full Advance-XXXXXXXX.zip from your phone
(Optional)Flash Gapps.zip from your phone
Reboot
Features :
-Highly optimised ROM
-Stable
-Smallest ever 135mb rom
-New Battery tweaks
-New speedup tweaks
-complete AOSP
Download :
https://www.androidfilehost.com/?w=files&flid=45358
(Please don't use new opengapps. getting errors)
Gapps
Review:
Thanks to @werty100
[/YOUTUBE]
XDA:DevDB Information
Full Advance 4.4.2, ROM for the Samsung Galaxy S I9000
Contributors
althafvly, kasper_h, Cyanfox
ROM OS Version: 4.4.x KitKat
Based On: Cyanogenmod
Version Information
Status: Stable
Current Stable Version: Full Advance 4.4.2-2
Stable Release Date: 2015-12-12
Created 2015-12-12
Last Updated 2017-02-01
@althafvly,Base 4.4 is most stable for i9000 than other Android bases,many thanks for your works.
What about Android 4.4.4? D:
EDIT: anyway, thanks for your hard work!
Flowah123 said:
What about Android 4.4.4? D:
EDIT: anyway, thanks for your hard work!
Click to expand...
Click to collapse
i think 4.4.2 is more stable for i9000. coz its very fast with gapps
coolberry said:
@althafvly,Base 4.4 is most stable for i9000 than other Android bases,many thanks for your works.
Click to expand...
Click to collapse
Thank you
Full Advance for 4.0.3 ?
yah7733 said:
Full Advance for 4.0.3 ?
Click to expand...
Click to collapse
what do you mean?
althafvly said:
what do you mean?
Click to expand...
Click to collapse
for ICS ..
I will test this rom i comment my opinions now i am installing rom with /data F2FS like in all new roms, GAPPS you tell us, and SuperSU 2.46
---------- Post added at 04:17 PM ---------- Previous post was at 04:12 PM ----------
werty100 said:
I will test this rom i comment my opinions now i am installing rom with /data F2FS like in all new roms, GAPPS you tell us, and SuperSU 2.46
Click to expand...
Click to collapse
Phone Encryption ?¿ i tell my after boting It said "reset phone" and it reset and perform a wipie it self and and another time the same
---------- Post added at 04:22 PM ---------- Previous post was at 04:17 PM ----------
werty100 said:
I will test this rom i comment my opinions now i am installing rom with /data F2FS like in all new roms, GAPPS you tell us, and SuperSU 2.46
---------- Post added at 04:17 PM ---------- Previous post was at 04:12 PM ----------
Phone Encryption ?¿ i tell my after boting It said "reset phone" and it reset and perform a wipie it self and and another time the same
Click to expand...
Click to collapse
F2FS DATA is not supported nor in recovery neither on system in this rom
Also Mackay Kernel i was thinking you will put the Omni Kernel
WIFI not working
Same here wifi not working even after clean install from 2.3.6.Could it be a kernel problem?
Edit:with semaphore everything ok
werty100 said:
I will test this rom i comment my opinions now i am installing rom with /data F2FS like in all new roms, GAPPS you tell us, and SuperSU 2.46
---------- Post added at 04:17 PM ---------- Previous post was at 04:12 PM ----------
Phone Encryption ?¿ i tell my after boting It said "reset phone" and it reset and perform a wipie it self and and another time the same
---------- Post added at 04:22 PM ---------- Previous post was at 04:17 PM ----------
F2FS DATA is not supported nor in recovery neither on system in this rom
Also Mackay Kernel i was thinking you will put the Omni Kernel
WIFI not working
Click to expand...
Click to collapse
Yeah f2fs not working . ext4 is only working . WiFi is kernal problem I think so. Use semaphore kernal
ioannis_m said:
Same here wifi not working even after clean install from 2.3.6.Could it be a kernel problem?
Edit:with semaphore everything ok
Click to expand...
Click to collapse
Use semaphore or cyancore
yah7733 said:
for ICS ..
Click to expand...
Click to collapse
No ics
I recommend this rom.. is very nice
Good Job
Full advance 6.0.1
http://forum.xda-developers.com/showthread.php?t=3277051
New fixed build . try this
https://copy.com/pxmfMSFfqpcHvA8E
I will try to make today a small review of this rom...
werty100 said:
I will try to make today a small review of this rom...
Click to expand...
Click to collapse
Here you have it ...
Is a small review of rom look and performance...
I am starting i need to fix some things for recording better videos and things like that
Any other review you will like PM and i will try to make it now than i am in holidays
werty100 said:
I am starting i need to fix some things for recording better videos and things like that
Any other review you will like PM and i will try to make it now than i am in holidays
Click to expand...
Click to collapse
I know you said to PM you, but I think this will interest to many people, so I'll ask you here:
can you review some of the three MM ROM?
Flowah123 said:
I know you said to PM you, but I think this will interest to many people, so I'll ask you here:
can you review some of the three MM ROM?
Click to expand...
Click to collapse
A very good quetion , I was waiting for soorti to publish cm13 to install it and make review
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Information:
This is up to date builds of CyanogenMod 12.1 based on original work by jrior001.
Known issues:
FM Radio is unsupported.
SELinux is in permissive mode for now.
Links:
Download CyanogenMod 12.1
Download GAPPS
Device Tree
Kernel Sources
CyanogenMod Patches 1, Patches 2
Credits:
CyanogenMod
jrior001
crpalmer
And other ZF2 contributors
XDA:DevDB Information
Unofficial CyanogenMod 12.1 Updated (Z00D), ROM for the Asus ZenFone 2
Contributors
flex1911
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 12.16.5.126
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-12
Last Updated 2016-11-12
Reserved
Changelog:
Code:
20161112:
Updated base to .126 stock rom
Updated to last CM sources and 2016-10-01 security patch
Major SELinux update (policy is pretty raw and unstable for now, so permissive is used)
Fixed USB-OTG support (working USB disk)
Some minor updates and fixes
Please update to latest stock firmware before installing this!
Iam so glad you supported our device
Thank you very much
Hope you will compile more rom for z00d
12.1??
kjinx01 said:
12.1??
Click to expand...
Click to collapse
Because of problems with hwcomposer I did not manage to run graphics on cm13 for now. I'm looking for a solution, but I can not promise that issue somehow can be solved without sources to critical libraries.
Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir
ShakiraHill said:
Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir
Click to expand...
Click to collapse
Official CM is always good. But with 12.1 it's almost pointless now.
Good Work.Your rom is wonderful
Your updated cm 12.1 is very good and stable
Hope you will consider to move to compile cm 13 or official cm 12.1 for z00d as soon as possible
We will all really apreciate
Moreover,when i use music player,it crashed and stated that can't play this song
And whenever i reboot ,it has a popup of force close
Hope you take a quick look and fix this bug
Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.
ivalno said:
Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.
Click to expand...
Click to collapse
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!
flex1911 said:
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!
Click to expand...
Click to collapse
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
Yeah, everything is right. Make sure you're running latest firmware (.126)
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.
ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
Yes, it is necessary. You can update from previous cm12.1 only if you already have last firmware, otherwise it will not work consistently.
This ROM was built using .126 blobs, drivers and kernel, so you are required to update the firmware to .126.
RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
I aslo hope so
I hope some devoted devs will find a solution to this problem to compile cm 13 for z00d
We are really looking forward to cm 13 in the future,sir :'
Or at least is cm 12.1 official
#alwaysrespect
---------- Post added at 04:13 PM ---------- Previous post was at 04:08 PM ----------
jacoghi said:
Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.
Click to expand...
Click to collapse
We are really glad to hear that there will be more roms coming up for our device
I can't wait to see them
Thank you very much for your supporting
We highly appreciate it
Moreover, we are also really looking forward to your solutions to compile cm 13 for z00d
Or at least, cm 12.1 official is also good now ;'
All best wishes for you
Hope you are healthy and lucky
Hi, thanks for your work
How is battery life compared to stock?
Greg9 said:
Hi, thanks for your work
How is battery life compared to stock?
Click to expand...
Click to collapse
I did not compare that. You can test it by yourself. If it's worse - i'll do something with cpu scaling in next build.
Op, this is it. Couldn't get ril to work yet, as I mentioned. However, it's ridiculously fast in comparison to 5.1 so I guess it's worth the shot.
Is that 6.0 for zood? Is that a dream?! Man, I hope you'll manage to get ril working
Lineage 14.1 For H30-U10 By Syed Hassan
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
>Flash Gapps
>flash Optional Zips if you want
>reboot.
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773
Download
Gapps
Optional
Super Su Already Added To get root..
Dont Forget To Hit Thanks Button If you Support My Work
Known Issue:
Fm radio and sim2 incoming
Credit:
Hassanjavaid8181(ME)
Manjunath Yashu
Aditya Kumar
Tribetmen
Fire855
Farhung
XDA:DevDB Information
[ROM] [7.1.x] LineageOS 14.1 for H30-U10 by Syed Hassan, ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
Source Code: https://github.com/MTK-Kernels/android_kernel_huawei_h30u10
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2017-10-16
Last Updated 2018-01-25
links added..
Can i update from cm13 or do i need to do a clean install ? Witch twrp is minimum needed?
Thx
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
And what means stable, is everything working ?
Vpn, Screen mirroring, camera,bt, and so on ?
Its not booting bro....Just sits on the boot logo....
GTtron816 said:
Its not booting bro....Just sits on the boot logo....
Click to expand...
Click to collapse
Did you clean flash?
hassanjavaid8181 said:
Did you clean flash?
Click to expand...
Click to collapse
Yes...wiped every thing except internal and SD card....
blubba83 said:
Can i update from cm13 or do i need to do a clean install ? Witch twrp is minimum needed?
Thx
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
And what means stable, is everything working ?
Vpn, Screen mirroring, camera,bt, and so on ?
Click to expand...
Click to collapse
Twrp 3.1.1 would be fine
Yes most of things are working....
And you will have to do a clean flash..
I have looked at the ZIP Struktur, why you put additional apps to this Rom, Software people need can be installed by them self, no need to put titanium and solidexplorer in this Rom it only blows up the size.
Thx
I'm using the twrp by codelover which is 2.8.x is it OK.
Hi Hassan, I hope you are well. I continue with my gaaps question. Which ones should I download? I see in the information of the rom that is 7 and in the title I see 7.1. get me out of doubt please
GTtron816 said:
I'm using the twrp by codelover which is 2.8.x is it OK.
Click to expand...
Click to collapse
Yeah its OK it should work fine..
David723 said:
Hi Hassan, I hope you are well. I continue with my gaaps question. Which ones should I download? I see in the information of the rom that is 7 and in the title I see 7.1. get me out of doubt please
Click to expand...
Click to collapse
I am well.thank you
Gapps you downloaded for nouget rr would work fine for this also..
If you want to download
Arm
7.1
Pico..
hassanjavaid8181 said:
I am well.thank you
Gapps you downloaded for nouget rr would work fine for this also..
If you want to download
Arm
7.1
Pico..
Click to expand...
Click to collapse
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
---------- Post added at 02:46 PM ---------- Previous post was at 02:19 PM ----------
David723 said:
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
Click to expand...
Click to collapse
I could not install it, it stuck in the logo
Boot
I tried to flash this rom but it is stuck in booting logo... (TWRP 3.1.1.0)
David723 said:
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
---------- Post added at 02:46 PM ---------- Previous post was at 02:19 PM ----------
I could not install it, it stuck in the logo
Click to expand...
Click to collapse
I did the wipes and reinstalled and nothing stuck in the logo
It shows installation succeeded but it won't boot....
Tried flashing 3 times....
flash that patch via recovery and report here
https://mega.nz/#!dc41wDTT!7jqlYqr2li7BeQsmj8q5kInE4a43imsuh8j-BRMv6jY
David723 said:
I did the wipes and reinstalled and nothing stuck in the logo
Click to expand...
Click to collapse
flash patch i uploaded after installing rom and report.
Thanks Hassan, some screenshots would be useful. and what about the double tap? Is it included? I'm really in love with it!
hassanjavaid8181 said:
flash patch i uploaded after installing rom and report.
Click to expand...
Click to collapse
Ok
Theory says - CAF based ROM should be the ultimate in performance & battery and this is currently the only CAF based rom available that gets regular updates and being actively worked on.
1. ROM Sources: https://github.com/Citrus-CAF
2. Kernel: https://github.com/Krieg-Kernel
(Slider is not working)
Download here: https://androidfilehost.com/?fid=11410963190603872951 (tested on my own DECRYPTED OP5 with OB21)
1. Wipe cache/system/data
2. Flash ROM zip
3. Boot to ROM
4 (OPTIONAL) reboot to TWRP, flash gapps+Magisk
5. reboot
This is only for the flashaholics right now! The rom works fine but the developers claims is still in its infant phase!
I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me
great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
quake73 said:
I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me
Click to expand...
Click to collapse
how about using firmware version?
jahidinbedod said:
great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
how about using firmware version?
Click to expand...
Click to collapse
added OB21 to my OP but stable 5.1.7 works fine, too
quake73 said:
added OB21 to my OP but stable 5.1.7 works fine, too
Click to expand...
Click to collapse
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?
jahidinbedod said:
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?
Click to expand...
Click to collapse
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file
quake73 said:
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file
Click to expand...
Click to collapse
yes I did
after booting up to the home screen
reboot recovery right?
then flash gapps + magisk
but not boot up (restart the logo)
what is the gapps + magisk version?
i use nano + magisk 17.1 stable
---------- Post added at 05:18 AM ---------- Previous post was at 04:33 AM ----------
@quake73
success using magisk 17.3 :good::good::good:
11/30 build 54MB? Bito treasures in your androidfilehost folder. Bliss. Hmmm.
same here,
afh link is showing CitrusCAF-v5.0-KeyLime-Pie-cheeseburger-COMMUNITY-20181130-2017.zip
for the OnePlus OnePlus 5, by quake73 = 54.9 MB ??
after downloading it is showing the archive is corrupt..
In afh click on quakes name, then oneplus5. There is a 11/29 build. Along with some other stuff. Havent tried it.
The Download file is 54MB??It must be for a Pen Phone
---------- Post added at 12:13 PM ---------- Previous post was at 11:16 AM ----------
Here is a link to 1129 Build 677MB
https://androidfilehost.com/?fid=11410963190603862312
---------- Post added at 12:38 PM ---------- Previous post was at 12:13 PM ----------
Clean installed 1129 Flash
ROM
Gapps
xXxNoverity
Magisk17.3
All in one go, boots up does all setting connects to wifi etc. looks OK
Yeah, you are right, 30/11 is only 54MB, I don't know how did that happen, I apologize. I guess it was some glitch with AFH. It is corrected now.
P.S. Magisk doesn't seem to work on 30/11. I modified the first post to point to the 29/11.
1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)
thaidroid said:
1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)
Click to expand...
Click to collapse
I do the same
I also have fully set up aex backed up for emergency restoring to a functional rom. As for the features - I believe the devs will slowly add them in the future. I follow their telegram channel, they still haven't released any official build for any device, i'd say it's still in its alpha phase. I hope they will continue their good work, I too am curious if the CAF base can give any measurable difference.
Added to the OnePlus 5 Index Thread here.
Can you keep updating?
Can you keep updating?
[email protected] said:
Can you keep updating?
Click to expand...
Click to collapse
Sure, I'll try making a new build whenever the Citrus' devs add something new or CAF sources get updated.
Nice, been waiting for a CAF based ROM to try and see the differences.
Thank you very much!
New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029
quake73 said:
New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029
Click to expand...
Click to collapse
good job bro :good:
i like based on CAF
wait for official release
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on bacon
Official Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (Nano/pico are the only ones that fits)
Changelog:
Changes for bacon
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to jrior001
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS, ROM for the OnePlus One
Contributors
jrior001, npjohnson, mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2019-03-01
Last Updated 2019-03-01
Let's try it out....bacon pie...
jrior001 said:
Already on my list to look into. Its been working in bring up testing so should be easy fix.
Click to expand...
Click to collapse
Thanks for the great work you (and others of course) have done for getting bacon to remain a supported device by LineageOS :good:
Regarding LED notificattion issue, it seems that in some unofficial builds have already found the solution thanks to @dar2q
dar2q said:
if you use the commit from hxxps://review.lineageos.org/c/LineageOS/android_device_oppo_msm8939-common/+/234947 even though it is for another model, the LED starts working with SELinux still set to enforcing (sorry but i cant post links yet)
Click to expand...
Click to collapse
dar2q said:
@KiD3991 and @Tomoms for the LEDs to fully work (aka pulsing) you need to allow it in the sepolicy/file_contexts file:
Code:
/sys/devices/[a-z0-9]+\.i2c/i2c-[0-9]/[0-9]-[a-z0-9]+/grpfreq u:1object_r:sysfs_leds:s0
/sys/devices/[a-z0-9]+\.i2c/i2c-[0-9]/[0-9]-[a-z0-9]+/grppwm u:1object_r:sysfs_leds:s0
remove 1 at u:1object
Click to expand...
Click to collapse
I really don't know if it will be related to, but I tell you it just in case it can be useful.
drezz2 said:
What exactly does "Issue with play store and our device fingerprint" consist of what I can or can not do? that is, the store works but it is possible that it will not let me install any app?
Click to expand...
Click to collapse
It means that Play Store provides us with obsolete versions of some applications (such as Instagram or Facebook). The simplest solution is to download them from sites like apkmirror, that's all.
I have a problem with adb sideload. I made Format Data and when I try to flash Pie by adb sideload on TWRP says "you need adb 1.0.34 or newer". How can I proceed?
Enviado desde mi MI 8 mediante Tapatalk
Someone have issue with camera? Freeze...
Because of the new thread devoted to lineageos 16 I will repeat the description of issues with the first LOS16 relase:
- NFC is not working (GPay), phone can receive NFS tags but cannot send it,
- camera app crashes, it has no permission to device camera,
- led notificatiins are not working.
Upgrade according to LOS developers recommendations: from last LOS15.1 flash in trwp, ROM and gapps pico.
Hardware Buttons
Hi, not sure if you're aware of this already but hardware buttons don't seem to turn off after nav bar is toggled. Can anyone else confirm this? I've dirty flashed over 15 so maybe that's why but I'm not sure. By the way, thanks for supporting our device even longer. Props to the lineage team! :good:
Just wanted to ask if SELinux is enforcing or permissive on this build? Thanks once more![/QUOTE]
miaoruicong31431614 said:
Just wanted to ask if SELinux is enforcing or permissive on this build? Thanks once more!
Click to expand...
Click to collapse
Official builds always enforce SELinux.
Taurus_XDA said:
Thanks for the great work you (and others of course) have done for getting bacon to remain a supported device by LineageOS :good:
Regarding LED notificattion issue, it seems that in some unofficial builds have already found the solution thanks to @dar2q
I really don't know if it will be related to, but I tell you it just in case it can be useful.
It means that Play Store provides us with obsolete versions of some applications (such as Instagram or Facebook). The simplest solution is to download them from sites like apkmirror, that's all.
Click to expand...
Click to collapse
thanks
the problem maybe detecting in what applications that happens, maybe you are not aware of it
Is it possible that this is the cause of this too?
https://www.reddit.com/r/Android/comments/a19cl3/google_play_silently_updating_some_apps_even_when/
(Maybe it has nothing to do ... but I've noticed)
maybe I should wait a bit longer to install the rom being the main mobile.
I hope that the first battery data (drainage) .. is provided by the people who have it installed:silly:
Good
drezz2 said:
thanks
the problem maybe detecting in what applications that happens, maybe you are not aware of it
Is it possible that this is the cause of this too?
https://www.reddit.com/r/Android/comments/a19cl3/google_play_silently_updating_some_apps_even_when/
(Maybe it has nothing to do ... but I've noticed)
maybe I should wait a bit longer to install the rom being the main mobile.
I hope that the first battery data (drainage) .. is provided by the people who have it installed:silly:
Click to expand...
Click to collapse
Yes, you have to detect which applications aren't updated and solve it by yourself.
The link you are reffering I don't think is related. The problem here is the device fingerprint (or certification) that is too old (from the last CyanogenOS build from 2016).
vitafer1 said:
I have a problem with adb sideload. I made Format Data and when I try to flash Pie by adb sideload on TWRP says "you need adb 1.0.34 or newer". How can I proceed?
Enviado desde mi MI 8 mediante Tapatalk
Click to expand...
Click to collapse
What about getting a current adb? Mine is 1.0.40 (and i guess not really current, binary is from Mai 2018).
Your device tells you :"use adb 1.0.34 or never" ... what is unclear with this?
Cheers
Kurt
P.S.: ... next to come will be the question : "but where can i get it" ... i did the googling for you : Android Platform-Tools
Taurus_XDA said:
Yes, you have to detect which applications aren't updated and solve it by yourself.
The link you are reffering I don't think is related. The problem here is the device fingerprint (or certification) that is too old (from the last CyanogenOS build from 2016).
Click to expand...
Click to collapse
Thank you again
I imagined that it had no relationship, and this I have begun to notice not long ago .. but I do not know ... it will be a mistake in the store .. I hope it is not something with intention
krzysn said:
Because of the new thread devoted to lineageos 16 I will repeat the description of issues with the first LOS16 relase:
- NFC is not working (GPay), phone can receive NFS tags but cannot send it,
- camera app crashes, it has no permission to device camera,
- led notificatiins are not working.
Upgrade according to LOS developers recommendations: from last LOS15.1 flash in trwp, ROM and gapps pico.
Click to expand...
Click to collapse
Camera is not a issue at all
It does not crash it opens fine and records video and takes pictures with no problem
I am running the latest los nightly you can look at my screenshot
Please recommend best firmware baseband zip for LOS 16 for oneplus one thanks in advance...
I hope this marks the beginning for LOS based roms
saurabh.pin2 said:
Please recommend best firmware baseband zip for LOS 16 for oneplus one thanks in advance...
Click to expand...
Click to collapse
There is no "best" firmware, it all depends on you and where you live. For most of the people best is c6-00241
P.S for me camera works fine and yeah LED doesn't work, but it doesn't bother me
LTMendarynas7 said:
P.S for me camera works fine and yeah LED doesn't work, but it doesn't bother me
Click to expand...
Click to collapse
Are you have wiped any partition before upgrade?
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
A few minutes ago I have flashed my phone again with wiped system partition. Still problems with camera and NFC
krzysn said:
Are you have wiped any partition before upgrade?
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
A few minutes ago I have flashed my phone again with wiped system partition. Still problems with camera and NFC
Click to expand...
Click to collapse
I always go safely when upgrading major android versions. I do clean flash because I don't like doing dirty and it helps avoid me some problems