Related
INTRODUCTION
First of all, I love RR rom very much. However, no developer is willing to continue to develop this rom since nougat was out at the early of 2017.
So, i was like "Hey why not build it myself" ...
Then i google myself and yep finally here comes the first rom that I builded successfully!
Thanks to Google and of course the team of RR
Im just have little knowledge in building rom
Im just follow step in the github page of RR...
So any problem mentioned by you guys, i may not be able to answer....
Hope anyone have those knowledge can help!
We learn together!
-IMPORTANT-
- This rom does not support LVM ( Chinese layout maybe support )
- This rom is ROOTLESS!!! flash the zip below to have root
- This is the final build of RR rom for Nougat
So don't ask for update for Nougat anymore
Let Us Wait For Oreo!!!:victory:
-INSTALLATION INSTRUCTIONS-
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
-DOWNLOAD LINK-
-ROM-
https://drive.google.com/open?id=1JHoPmS0K1S-H5Fq1xUHhESoKB0eBdqoZ
-GAPPS-
http://opengapps.org/
-EXTRA-
Root : https://ftp.acc.umu.se/mirror/lineageos/su/addonsu-14.1-arm-signed.zip
Source Code: https://github.com/ResurrectionRemix
Source Code: https://github.com/lineageos
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.x
Based On: Lineage OS
Version Information
Status: Final Unofficial
Current Version: 5.8.5_r29
Created 2017-11-04
Hi, can this be flash on FIND 7A? Thanks a bunch
imna357 said:
Hi, can this be flash on FIND 7A? Thanks a bunch
Click to expand...
Click to collapse
i dun have find7a.... u may try it and give us the feedback
David_Ozc said:
i dun have find7a.... u may try it and give us the feedback
Click to expand...
Click to collapse
will do. thanks
find7a也可以刷，就是dpi有点大
小池迟 said:
find7a也可以刷，就是dpi有点大
Click to expand...
Click to collapse
感恩！
[QUOTE=小
i get stuck in fastboot, cannot go into recovery mode and also boot up the phone, any solution for this?
NgCheeHang said:
i get stuck in fastboot, cannot go into recovery mode and also boot up the phone, any solution for this?
Click to expand...
Click to collapse
Quite likely need to run fastboot oem unlock from computer to phone in fastboot mode. Do a quick search for directions on forums.
Gborg3 said:
Quite likely need to run fastboot oem unlock from computer to phone in fastboot mode. Do a quick search for directions on forums.
Click to expand...
Click to collapse
I messaged him a tool for this that's most likely easier for him
How to fix
I flash ROM and gapps and then in screen show "encryption unsuccessful "
Faiez-[NivoBeatz said:
;74776217]I flash ROM and gapps and then in screen show "encryption unsuccessful "
Click to expand...
Click to collapse
You have the wrong partition layout, you have lvm
Jan.Pul said:
You have the wrong partition layout, you have lvm
Click to expand...
Click to collapse
How to fix that? I use oppo find 7.
Meh
Faiez-[NivoBeatz] said:
How to fix that? I use oppo find 7.
Click to expand...
Click to collapse
Here's what I do when i get that encryption unsuccessful.
I do it in a harder way but idk xP
First I flash again to stock recovery and ColorOS 2.1.5i,from the stock recovery I change the storage partition and reflash the custom Rom again and everything seem to work fine.
akmlfhm said:
Here's what I do when i get that encryption unsuccessful.
I do it in a harder way but idk xP
First I flash again to stock recovery and ColorOS 2.1.5i,from the stock recovery I change the storage partition and reflash the custom Rom again and everything seem to work fine.
Click to expand...
Click to collapse
But you need lvm because you need the space, so install an lvm aware rom like omnirom. Unfortunately lineageos is incompatible with lvm and you get that encryption unsuccessful...
First build for RR Oreo 8.1.0 is officially released for some device.
Any news for Find7?
rdis said:
First build for RR Oreo 8.1.0 is officially released for some device.
Any news for Find7?
Click to expand...
Click to collapse
for now it is not stable will try to update when it is stable enough
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
David_Ozc said:
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
Click to expand...
Click to collapse
My find 7 still going strong. At the moment using AOKP OREO. I have unified storage Wuxianlin style, so I'm using modded TWRP.
David_Ozc said:
Anyone here still using Oppo Find 7?
planning to build an OREO build FINAL version
my Oppo Find 7 dropped and screen broken last month so i need someone to test it after build
If no one still using this phone then i will leave this community forever. Do anything to show your presence here XD
Click to expand...
Click to collapse
Find7s with crdroid oreo here. Unified storage, modded twrp.
Sent from my Find7 using XDA Labs
For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
allofee said:
For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
Click to expand...
Click to collapse
The G97xF version works on G97xN too no need for this thread.
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
long time ago I tried the twrp but not working for my g975n, so I thought it's still not supported.
could you delete this post @admin? thanks.
Thanks for this amazing work !
Abaddon said:
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
Click to expand...
Click to collapse
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
m.orgilsaikhan said:
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
Click to expand...
Click to collapse
Via custom roms based on ONEUI with patched system and kernel. yes.
Via ODIN, you'd have to do some patching else it won't boot.
Can't exactly remember, but I had an N variant before.
I noticed a few days ago that a new version of TWRP that supports Android 11 is available for a lot of popular phones including the Pixel 3a. I was wondering if anyone has tried installing and using this version of TWRP yet. If you have, did you have any issues installing and using it?
TWRP 3.5.1
Tried it already, and got an error. However I am on A10. This was a mini update before A11 support. Read here.
Can you install android twrp on android 10? and can u install 10 based roms using said twrp?
Denu228 said:
Can you install android twrp on android 10? and can u install 10 based roms using said twrp?
Click to expand...
Click to collapse
No, our official TWRP only supports A9 for now.
MoistPicklez said:
No, our official TWRP only supports A9 for now.
Click to expand...
Click to collapse
Any idea if 3.5.2_9 ( https://dl.twrp.me/sargo/ ) does support Android 11? No instructions about how to install it....
Fentadroid said:
Any idea if 3.5.2_9 ( https://dl.twrp.me/sargo/ ) does support Android 11? No instructions about how to install it....
Click to expand...
Click to collapse
It doesn't work on A11 or A10 yet. These are mini releases before A11 support.
MoistPicklez said:
It doesn't work on A11 or A10 yet. These are mini releases before A11 support.
Click to expand...
Click to collapse
Ok, thank you
Using 3.5.1_9 on LG V20. Any idea why it seems to think that the year is 2067? I thought the flux capacitor in my DeLorean was broken.
is there android 11 support yet?
They would have to figure out the A/B partition thing.
That was the issue a year ago, at least.
blksith0 said:
They would have to figure out the A/B partition thing.
That was the issue a year ago, at least.
Click to expand...
Click to collapse
I really enjoyed using TWRP on older android versions but sadly, I don't think the A/B partition issue will be resolved.
Hey, a working TWRP for A11 on Sargo has been created by @Captain_Throwback on the Sargo/Bonito Telegram group. Should be available soon.
Anghirrim said:
Hey, a working TWRP for A11 on Sargo has been created by @Captain_Throwback on the Sargo/Bonito Telegram group. Should be available soon.
Click to expand...
Click to collapse
Could you share the Telegram group link please?
edit: found it: https://t.me/pixel3a/
benji said:
Could you share the Telegram group link please?
edit: found it: https://t.me/pixel3a/
Click to expand...
Click to collapse
Yep, saw you joining.
Has anyone had any luck with the news 3.6 build of twrp from nov 21?
Download TWRP for sargo
Download TWRP Open Recovery for sargo
dl.twrp.me
sciwhiz said:
Has anyone had any luck with the news 3.6 build of twrp from nov 21?
Download TWRP for sargo
Download TWRP Open Recovery for sargo
dl.twrp.me
Click to expand...
Click to collapse
No, I updated to Android 12 in November before TWRP 3.6 was released.
I was able to boot 3.6.0 with android 12 installed, BUT /data failed decryption, so I'm guessing needs a12 encryption update. I did not try to install it, just fastboot the image.
This is the first time I tried TWRP on the 3a, as I upgraded to a10 immediately after getting the phone two years ago.
Google Pixel 3A is Stuck in Bootloader & OEM is Unlocked while performing software Update.
please help installing TWRP with ADB unauthorized.
Any update on this? I'd like to use TWRP and flash Lineage 18 (Android 11)
Does anyone have the Kernel for 11.2.1.1. OTA ?
Psyscope said:
Does anyone have the Kernel for 11.2.1.1. OTA ?
Click to expand...
Click to collapse
While I don't have it, if you're having issues, you could always try going to 11.2.2.2 instead?
Psyscope said:
Does anyone have the Kernel for 11.2.1.1. OTA ?
Click to expand...
Click to collapse
OnePlus 9 kernel sources are here.
Or use payload_dumper to extract kernel from a full OTA
WatskeBart said:
OnePlus 9 kernel sources are here.
Or use payload_dumper to extract kernel from a full OTA
Click to expand...
Click to collapse
Great to share. I'm just wondering what OP needs it for so that we may be able to better assist if this doesn't resolve the possible issue they may be having.
Thank You, for the payload dumper much appreciated.
bulletbling said:
Great to share. I'm just wondering what OP needs it for so that we may be able to better assist if this doesn't resolve the possible issue they may be having.
Click to expand...
Click to collapse
I think OP meant to ask for Stock boot image for Global 11.2.1.1 AA.
My 9 Pro too stuck on this Build, due to Fastboot Flashed a supposed to be global version of the stock boot image(Most likely it's not Global version, ,maybe EU). Not able to OTA update since then, until Oneplus post FULL ROM on the support page, Global 11.2.1.1 AA stock boot image might be our(whoever lost their Global 11.2.1.1 AA stock boot image) only chance to get the system updates installed.
cmyhby said:
I think OP meant to ask for Stock boot image for Global 11.2.1.1 AA.
My 9 Pro too stuck on this Build, due to Fastboot Flashed a supposed to be global version of the stock boot image(Most likely it's not Global version, ,maybe EU). Not able to OTA update since then, until Oneplus post FULL ROM on the support page, Global 11.2.1.1 AA stock boot image might be our(whoever lost their Global 11.2.1.1 AA stock boot image) only chance to get the system updates installed.
Click to expand...
Click to collapse
Check my thread here:
[Solution] Installation Failed - Cannot Update / Try Again on OOS 11.2 Global
If you are having the cannot update issue and have the global variant of the OP9 Pro, you probably had flashed the EU (or other / wrong software version) boot.img. If your software version is anything other than 11.2, (including 11.2.1.1) you...
forum.xda-developers.com
You just need a global boot image from 11.2.1.1. Ask around.
Update:
Stable update has been released.
Xiaomi announced they’ll upgrade the Redmi Note 8 Pro to Android 11 late last year. They have gone to update the global models, leaving the European variants waiting for some time now. Of course, the update was going to arrive, and perhaps, the company needed some time to address a few issues before the European release. Meanwhile, as expected, the Redmi Note 8 Pro Android 11-based MIUI 12.5 update in Europe is now available to select users.
The Redmi Note 8 Pro is receiving both Android 11 and MIUI 12.5 simultaneously, unlike the Redmi Note 8, that’s currently pushing Android 11 only. It is seeding with a version number – MIUI 12.5.2.0 RGGEUXM – and weighs in at 2.2GB. Coming along with the update are the features of the new MIUI OS to improve device performance and address some problems introduced by MIUI 12. Interestingly, the Android security patch level is pushed to July 2021 to increase system security and stability.
Of course, the update brings a stable MIUI based on Android 11, meaning that you get the features of the current Android OS as well. However, some known bugs are affecting all MIUI Android 11 builds. They include third-party launcher compatibility, ugly square chat bubbles, floating windows conflicting with keyboards, glitches, and lags. Luckily, you can improve the device’s performance by performing a factory reset after upgrading. However, that won’t fix the problems with the launcher as you need to revert to the MIUI system launcher.
Again, the Redmi Note 8 Pro Android 11-based MIUI 12.5 is a limited rollout. Those in Indonesia are also receiving the build with a version number – MIUI 12.5.2.0 RGGIDXM. It brings features of the new MIUI OS and a stable MIUI based on Android 11. Also, the Android security patch level has been pushed to July 2021 to increase system security and stability.
DOWNLOAD THE REDMI NOTE 8 PRO ANDROID 11-BASED MIUI 12.5 UPDATE IN EUROPE
Device Name: Redmi Note 8 Pro
Version: MIUI 12.5.2.0 RGGEUXM
Codename: begonia
Type: Stable Beta
Region: Europe
Android version: 11
Android security patch level: July 2021
Download Link: Recovery (found here)
INDONESIA MODELS
Device Name: Redmi Note 8 Pro
Version: MIUI 12.5.2.0 RGGEUXM
Codename: begonia
Type: Stable Beta
Region: Indonesia
Android version: 11
Android security patch level: July 2021
Download Link: Recovery
Flash at your own risk. I haven't got time yet to try myself. Please report bugs.
Link to article
UPDATE12.5.3.0 has been released.
Changelog:
Optimization: Updated Android Security Patch to August 2021.
Increased system security.
Official download here.
I get the info first time from Xiaomi Firmware Updater by @yshalsager
Cross finger though, the Redmi Note 8 had already Chinese stable A11 since Feb 2021, per today it hasn't got any global A11.
x3r0.13urn said:
I get the info first time from Xiaomi Firmware Updater by @yshalsager
Cross finger though, the Redmi Note 8 had already Chinese stable A11 since Feb 2021, per today it hasn't got any global A11.
Click to expand...
Click to collapse
A11 will most likely be the last official update for this device, wouldn't be surprised if it will take till end of this year.
This works in global variant via TWRP, but I don't recommend it. I could not find a way to install Google Play, even though i tested a lot of tutorials, magisk, appstores.
donkyshot said:
A11 will most likely be the last official update for this device, wouldn't be surprised if it will take till end of this year.
Click to expand...
Click to collapse
not really since they re-release the RN8 variant....
might be A12 like the case with RN5
Global variant finally.... MIUI12.5 A11 Global sucks no fastboot so I guess you have to flash some MIUI version and then update, coming from POSP and not happy about it but oh well. Will post after I flash it and see how it is. Probably end up back on a custom ROM dislike MIUI bloated bs....
dcindallas said:
Global variant finally.... MIUI12.5 A11 Global sucks no fastboot so I guess you have to flash some MIUI version and then update, coming from POSP and not happy about it but oh well. Will post after I flash it and see how it is. Probably end up back on a custom ROM dislike MIUI bloated bs....
Click to expand...
Click to collapse
Stock MIUI is horrendous. Bloatware, permissions etc. I can't stand it.
I'm on PE+ 11 but would prefer an official LineageOS release (no such thing available for now). I would also consider a xiaomi.eu release but they dropped support for Begonia/Begoniain.
Compass.
Global variant finally.... MIUI12.5 A11 Global sucks no fastboot so I guess you have to flash some MIUI version and then update, coming from POSP and not happy about it but oh well. Will post after I flash it and see how it is. Probably end up back on a custom ROM dislike MIUI bloated bs....
nah don't.... this version is bootlooping on me....
Crescendo Xenomorph said:
Global variant finally.... MIUI12.5 A11 Global sucks no fastboot so I guess you have to flash some MIUI version and then update, coming from POSP and not happy about it but oh well. Will post after I flash it and see how it is. Probably end up back on a custom ROM dislike MIUI bloated bs....
nah don't.... this version is bootlooping on me....
Click to expand...
Click to collapse
That sucks, I haven't had time to flash it let me see what's up later today.
dcindallas said:
That sucks, I haven't had time to flash it let me see what's up later today.
Click to expand...
Click to collapse
seems it's for Mi Pilot only.... that's why it's bootloop
Actually, it's bootlooping due to custom recovery..
I just did it like this:
- Download MIUI 12.5 Global from xiaomifirmwareupdater
- Reboot to recovery
- Flash from recovery
- Reboot to bootloader (using adb reboot bootloader or just boot to fastboot mode by rebooting and holding down the VOL_DN)
- Flash stock recovery (get it from xiaomifirmwareupdater, download previous ROM and extract recovery.img)
And with above I'm currently running MIUI 12.5.1. It's basically updated, I've lost no data.
I'm gonna dig in tomorrow for flashing custom recovery if i can find some working with this..
EDIT:
It may be that in order for TWRP to work on this ROM, a full wipe will need to be performed.
It's bootlooping due to patched vbmeta (vbmeta flashed with --disable-verity --disable-verification). So I'm unable to get TWRP to work. We might need some developer assistance ?
maretodoric said:
Actually, it's bootlooping due to custom recovery..
I just did it like this:
- Download MIUI 12.5 Global from xiaomifirmwareupdater
- Reboot to recovery
- Flash from recovery
- Reboot to bootloader (using adb reboot bootloader or just boot to fastboot mode by rebooting and holding down the VOL_DN)
- Flash stock recovery (get it from xiaomifirmwareupdater, download previous ROM and extract recovery.img)
And with above I'm currently running MIUI 12.5.1. It's basically updated, I've lost no data.
I'm gonna dig in tomorrow for flashing custom recovery if i can find some working with this..
EDIT:
It may be that in order for TWRP to work on this ROM, a full wipe will need to be performed.
It's bootlooping due to patched vbmeta (vbmeta flashed with --disable-verity --disable-verification). So I'm unable to get TWRP to work. We might need some developer assistance ?
Click to expand...
Click to collapse
I got it to install no issues I had to flash whatever the latest A10 MIUI ROM is from fastboot then it updated to 12.5 on its own. I am back on POSP I really just hate MIUI its bloated and slow, not worth the time or effort to be honest IMHO
dcindallas said:
I got it to install no issues I had to flash whatever the latest A10 MIUI ROM is from fastboot then it updated to 12.5 on its own. I am back on POSP I really just hate MIUI its bloated and slow, not worth the time or effort to be honest IMHO
Click to expand...
Click to collapse
Is Google Assistant and Android Auto working fine on that ROM? I've tried couple of A11 custom ROMs, they have issues with either GA or AA or both.
maretodoric said:
Actually, it's bootlooping due to custom recovery..
I just did it like this:
- Download MIUI 12.5 Global from xiaomifirmwareupdater
- Reboot to recovery
- Flash from recovery
- Reboot to bootloader (using adb reboot bootloader or just boot to fastboot mode by rebooting and holding down the VOL_DN)
- Flash stock recovery (get it from xiaomifirmwareupdater, download previous ROM and extract recovery.img)
And with above I'm currently running MIUI 12.5.1. It's basically updated, I've lost no data.
I'm gonna dig in tomorrow for flashing custom recovery if i can find some working with this..
EDIT:
It may be that in order for TWRP to work on this ROM, a full wipe will need to be performed.
It's bootlooping due to patched vbmeta (vbmeta flashed with --disable-verity --disable-verification). So I'm unable to get TWRP to work. We might need some developer assistance ?
Click to expand...
Click to collapse
So my suspicion confirmed coz the old ROM zip got recovery image but the A11 ROM doesn't have so many files in it including recovery.img.
Thanks for confirmation & guide....
So, basically there's no way to root it for noW?
Crescendo Xenomorph said:
So my suspicion confirmed coz the old ROM zip got recovery image but the A11 ROM doesn't have so many files in it including recovery.img.
Thanks for confirmation & guide....
So, basically there's no way to root it for noW?
Click to expand...
Click to collapse
TWRP A11 file from telegram begonia group, magisk app patch boot.img and flash patched .img file
maretodoric said:
It's bootlooping due to patched vbmeta (vbmeta flashed with --disable-verity --disable-verification). So I'm unable to get TWRP to work. We might need some developer assistance ?
Click to expand...
Click to collapse
but without patching vbmeta, it'll just bootloop even with A11 ver TWRP, right?
one more question: can you activate Google Discovery feed on MIUI12.5 or it's stuck on App Vault?
Crescendo Xenomorph said:
but without patching vbmeta, it'll just bootloop even with A11 ver TWRP, right?
Click to expand...
Click to collapse
i patched vbmeta before flashing twrp_A11, no reboot loop.
try format data
sigma9988 said:
i patched vbmeta before flashing twrp_A11, no reboot loop.
try format data
Click to expand...
Click to collapse
nice, I'll try this tom...
so, flash the full fastboot A10 latest then A11, patch vbmeta, flash TWRP-A11 + magisk, then all is OK?
maretodoric said:
Is Google Assistant and Android Auto working fine on that ROM? I've tried couple of A11 custom ROMs, they have issues with either GA or AA or both.
Click to expand...
Click to collapse
Work perfect and yes I feel ya I HATE that Google assistant doesn't work on most custom roms. Let me say this POSP is updated weekly, stable, smooth and everything works. Everything. My phone will like die with this time installed. Hoping the maintainer does A12 soon.