It doesn't work. It only shows the '+' and your connection becomes slower.
Original thread: https://c.mi.com/thread-996850-1-1.html
Redmi 5 Plus is capable of LTE Advanced, but unfortunately it's software-locked for unknown reasons. I'll show you step by step how to unlock LTE+/4G+
You do everything at your own risk and responsibility!
1. Download needed files on PC https://drive.google.com/uc?authuser=0&id=1EGIDZ3eI_F-Lit5bh0HESR_oP1rMP6Em&export=download
2. Extract downloaded file
3. Install QPST
4. Launch QPST Configuration
5. 'Call' *#*#717717#*#* on your phone
5. Plug in your phone
6. Your phone should appear in QPST Configuration > If it doesn't, check in device manager if Qualcomm USB Composite Device driver is up-to date. If it isn't - let Windows search for an update.
7. In QPST Configuration go to Start Clients > Software Download
8. Click on Backup and make a backup just in case.
9. Click on Restore and browse file
9. Select unlock_CA_vincent.QCN you've extracted before
10. Click on Allow phone/file ESN mismatch
11. Click Start and wait till it says the process has been completed (shouldn't last more than a few seconds)
12. Restart your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yep LTE+ icon ahow on your system but not ca i test speed 4G max speed stuck around 40-60Mps normally 2CA is 100Mpbs++ and i see on network signal guru it's show LTE Not LTE2CA and i try anoter qcn file it's same
ON REDMI 5 PLUS CAN'T USE THIS METHOD FOR UNLOCK CA (in global version MEG7 and my country is thailand)
but redmi 5 plus support intrabrand CA in my country but not support interbrand like b1+b3 or b3+b8 you can check with network signal guru and show me a result @Ksarin112
Need root ?
dont use this method, not useful, yes, you get the lte+ signal, but yr dl speed doesnt change and your ping, esp in gaming, goes right up
How use?
Anyone knows where is the default location for backup, as I used this method and no changes in speed but the battery drain faster and I don't remember the default location, because in order to use this method I selected my download folder to update phone by the downloaded qcin file.
The model number in qcn file and the phone do not match. I have redmi note 5 indian varient
Can you post any screen?
Related
I searched all forum but didnt get exact information i need , MY G3 is asian 32 GB D855 and SEA firmware , in settings there is no option for LTE , there are temporary ways like enable LTE from service menu or a parmanent method but first get root and delete LTE config apk and odex , My question is if i flash EUR kdz (i am aware i didn't get OTA's) is that possible it show me EUR firmware version in settings and LTE enabled by default in settings ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D855 using Tapatalk
Dial *#*#4636#*#* and on preferred network type, choose lte/gsm/wcdma...the other option is to upgrade to V10J from Asia, with complete wipe, this will choose 4G first...
This worked for me. Thank you
mingocr83 said:
Dial *#*#4636#*#* and on preferred network type, choose lte/gsm/wcdma...the other option is to upgrade to V10J from Asia, with complete wipe, this will choose 4G first...
Click to expand...
Click to collapse
10J is not available via OTA
Sent from my LG-D855 using Tapatalk
fix the LTE using Prop.Build
Had the same problem. Found this fix. It is a permanent fix but have be rooted. But seeing as rooting and unrooting so simple, that shouldn't be a problem.
Simply use a Prop Build editor to go into the build.prop and change the "telephony.lteOnCdmaDevice” value from 0 to 1. There are two lines on in the G3 build prop. Make sure both have the value of 1. Then save. Then reboot.
I applied this to my G3 problem and now it is completely fixed!! I can select LTE auto and it stays, even on a reboot! I'll basically have to do this everytime i flash a new rom or update but it works!
I'll probably make a YouTube video later today to share the fix.
This is simply a collection of information with some blanks filled in to allow those not as well versed in huawei/ADB as myself to rebrand. After 4 days of agony with Funkyhuawei and very little info i managed to resolve the issue myself. Primarilly, rebranding from pie on their toolkit would not work and i did not feel comfortable rebranding the more involved ways explained on here here.
You will need a membership to FH and credits. Also to have selected the same version eg 8.0.0.159 for the TARGET region. for me, i was c782 but rebranding to c432 so selected clt-l09c432 8.0.0.159
It is written with the intention of using FHRebrandTool2, as this one allows you to remain as CLT-L09 if that is your model, not force a switch to L29 even without dual sim
First, obviously, if you cant/havent unlcked FRP and bootloader, stop reading now. You're process is finished lol
Second, remove all security pins and fingerprints (developer options>require to be unlocked>off)
If you are on pie, use this incredibly simple automated script setup from @Androlark thank you my friend for this as you saved me here https://r.tapatalk.com/shareLink?ur...share_tid=3841687&share_fid=3793&share_type=t this is necessary as rebrandtool does not operate correctly with android 9 but fh instructions and even FH help are unclear on
For the correct software, download your latest android 8 version from Firmware Finder, taking note of the changelog, the flashing requires older update version with THREE folders, the giveaway is the changelog says "this will rollback your device to emui8" (dont rollback using Hisuite, as it itself advises not to if device unlocked. When selecting download in FF you may be presented with a list of many folders, most with the same name, simply click one of each name (update, public and cltxxxxxhw) transfer these to your phone after checking "check availability by imei" and doublechecking you have selected the correct region (C782,c432 etc)
Before flashing, to save panic, READ "AFTER FLASH INSTRUCTIONS" in flashy folder of extracted flashtool downloaded from above.
Follow post and flash.bat instructions and its all automated.
Factory Reset as advised when complete
Wahey you're back on old faithful Oreo and still device unlocked
Now startup device, complete basic setup to access menu, ensure adb AND allow adb during charge mode are on (this helps stop adb turning back off at restart in some cases) ensure to forget any wifi connection you used during setup
Back to fastboot (device off, hold power down,connect cable to computer) once loaded run FHRebrandTool2 again, being careful if you use manual entry to assign new model and region
Once complete and you restart you will keep getting connect usb to continue rebrand dont panic, hold power until shutdown then hold volume down and connect usb to computer again, you will get Erecovery. Select Install latest package and use the FunkyHuawei instruction from here, EG change DNS on router or use a computer as a hotspot to install new region software and wait.........wait.........wait.........funkyhuaweis carrier pidgeons are a bit slow
Rebranded and update back to pie and enjoy the precious security updates
Proof is in the pudding [emoji16] currently waiting on hisuite downloading my first update to 161
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CLT-L09 using Tapatalk
Do it at your own risk.
Share tutorial to help others.
This error happens because the ROM is not the correct one for the device;
Example:
PCAMIXM, OCACNXM, OCACNFK, OCAMIFH, and ETC.
If you remember what you were using before installing the rom that gave the problem just install again.
Example: I remember I was using PCAMIXM and installed OCACNXM.
Just go back to PCAMIXM.
If you do not remember you will have to test with existing, the correct rom will not display the message(Find device storage corrupted).
D̶o̶ ̶n̶o̶t̶ ̶u̶s̶e̶ ̶t̶h̶e̶ ̶u̶p̶d̶a̶t̶e̶ ̶R̶O̶M̶ ̶b̶e̶c̶a̶u̶s̶e̶ ̶i̶t̶ ̶d̶o̶e̶s̶ ̶n̶o̶t̶ ̶w̶o̶r̶k̶!̶
Fastboot ROM only.
First set up the device even with the message: Find device storage corrupted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enable OEM Mode
Whebever you change ROM, enable this option first before writing the new ROM!!!
[*][font=ProximaNova, Arial, sans-serif]Unlock[/font] the boot, don't worry it will be locked again when we pass the ROM.
Please follow the steps below:
Step 1. Download Mi Unlock application on PC and sign in with your Mi account;
http://miuirom.xiaomi.com/rom/u1 ... k-en-3.5.910.35.zip
Step 2. Turn off the phone manually and hold down the Volume down key and the power button to enter fastboot mode;
Step 3. Connect your phone to the PC using the USB cable and click "Unlock".
There we have the boot unlocked.
Download the program:
XiaoMiFlash
Links to roms in fastboot mode;
V10.4.1.0.PCAMIXM:
https://bigota.d.miui.com/V10.4.1.0.PCAMIXM/sagit_global_images_V10.4.1.0.PCAMIXM_20190714.0000.00_9.0_global_dbd26e5a5e.tgz
V10.3.4.0.OCAMIXM:
https://bigota.d.miui.com/V10.3.4.0.OCAMIXM/sagit_global_images_V10.3.4.0.OCAMIXM_20190527.0000.00_8.0_global_cc4f15601b.tgz
V10.0.1.0.OCAMIFH:
https://bigota.d.miui.com/V10.0.1.0.OCAMIFH/sagit_global_images_V10.0.1.0.OCAMIFH_20180905.0000.00_8.0_global_7ce4be65b4.tgz
Extract the rom:
sagit_global_images_V10.4.1.0.PCAMIXM_20190714.0000.00_9.0_global (Do not leave subdirectories, only the folder without subfolders).
Open the program click select and select the extracted rom.[attachimg]4808252[/attachimg]
Then select the option: clean all and lock(This option is at the bottom of the program.).
Then click flash.
Wait for the process to finish...
If you get the lock state message go to next rom.
This message may also be displayed when OEM mode is disabled.
Or bootlocked, fix [font=ProximaNova, Arial, sans-serif][color=#0800]Unlock[/color][/font] the boot
Click to expand...
Click to collapse
After the flash is over you will have your cell phone working again.
Being able to repair my device like this, I can't guarantee it will work with everyone!
Hope it helps anyone who is experiencing this issues.
Here are other ROMS for other models.
MIUI Global ROM All Devices
Additional information:V10.4.2.0.PCAMIXM(Latest)
V10.4.1.0.PCAMIXM(Rolled back)
V10.3.4.0.OCAMIXM
V10.3.1.0.OCAMIXM(Rolled back)
Got any tips? post to help your friends.
Sorry for any mistakes, my time is short.
Good luck.
I have a Huawei E5787Ph-67a which is locked to an Australian operator Telstra and have been trying to unlock the device to work with other service providers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So far my attempts to use the various Huawei code generators posted on various forums has not been very successful as the Huawei E5787Ph-67a requires a factory code which is in 16 digit Alphanumeric format. I have even tried paid online unlocking services but they have not been able to provide me the code.
The current Firmware version: 21.235.01.00.302 and Current Web UI version: 21.100.19.00.302.
I have managed to download the factory firmware on the web which is not an update EXE file but instead a BIN file: E5787Ph-67a_UPDATE_21.235.01.00.302_WEBUI_21.100.19.00.302_NE5.bin
I managed to put it into firmware update mode using the following steps:
1. Install driver: HUAWEI PRODUCT LINE WINDRIVER 2.78.12.00
2. Press and hold Reset and power on button simultaneously.
3. On the screen you will see "ready to update" and then "Installing".
4. Now connect E5787PH-67a to PC with USB cable.
5. Wait for few seconds to install the drivers on your computer and verify the Device manager shows the Huawei device under Ports (COM & LPT).
But after doing the above I am unable to connect via Balong_USB_Downloader or dc-unlocker2client no matter which set of ports I select. I was not able to telnet or ssh into it either via Putty.
I was wondering if there was a way to edit the E5787Ph-67a_UPDATE_21.235.01.00.302_WEBUI_21.100.19.00.302_NE5.BIN file to unlock the operator restrictions and upload it to the modem.
Any suggestions will be highly appreciated or any previous experience along this route with this device will be welcome.
I need this too. if you find out how to flash please tell me. regards
I have an unlocked E5787Ph-67a. Do you have a method to pull the firmware from it?
What firmware version do you have installed currently? You can see it in the web interface.
also got the same problem how to unlock ?
I can help with teamviewer. Change the Telstra firmware to global firmware with additional of band 5 and band 40
menatekera said:
I can help with teamviewer. Change the Telstra firmware to global firmware with additional of band 5 and band 40
Click to expand...
Click to collapse
This would be fantastic having help to understand how. This is my only net where I live and router currently unstable.
OnthewrongPlanet said:
This would be fantastic having help to understand how. This is my only net where I live and router currently unstable.
Click to expand...
Click to collapse
You need to know how to open modem casing and apply boot-point.
menatekera said:
I can help with teamviewer. Change the Telstra firmware to global firmware with additional of band 5 and band 40
Click to expand...
Click to collapse
Can you help me with my huawei E5787ph-67a?
menatekera said:
I can help with teamviewer. Change the Telstra firmware to global firmware with additional of band 5 and band 40
Click to expand...
Click to collapse
Hello, i have a 4gx E5787ph-67a openline but it can only be locked at BAND 28. Is there away to locked it on other BANDS like B1 only?
Hello, I need someone to explain to me the issue I’m facing with my phone. So I have a Xiaomi
Redmi note 8 pro (256GB Chinese version) that was working just fine until I installed the update of Android 11. After the update, google services was not working. I proceeded to unlock it and flashing it with the Mi Flash because I wanted to change the ROM to the global version, I chose the “clean all” option instead of “clean all and lock”. After the flash completed the phone showed an error (with a statement I did not pay attention to or read) and then it didn’t turn on (and only the LED was on). I tried to flash it again but it didn’t fix it. After that, I found a tool to bypass Xiaomi protection and I flashed it again with SP flash tool and switched it to the Global version (StockROM file after extraction= 6GB). It remained bricked so I flashed it back to the Chinese ROM with StockROM firmware upgrade, yet the phone is still broken but the LED is sometimes on (always on when I put it to charge). Can anyone help me please?
Did you install the drivers?
What does it say in device manager?
Have you tried flashing fastboot rom in sp flash tool? Dont use upgrade one
Kenora_I said:
Did you install the drivers?
What does it say in device manager?
Have you tried flashing fastboot rom in sp flash tool? Dont use upgrade one
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
still wont turn on
UNBRICK BEGONIA NO AUTH
Requirements: 1) PC 2) Internet 3) Patience Windows Method: • Download this file - Click-Here (Download from Telegram) (https://mega.nz/file/A4YSEZaA#0Jk3_jH8uVtMnATciVRtWw2r_SH0NPLq4P6SrGNuwJQ)
telegra.ph
Go here and do this
Kenora_I said:
UNBRICK BEGONIA NO AUTH
Requirements: 1) PC 2) Internet 3) Patience Windows Method: • Download this file - Click-Here (Download from Telegram) (https://mega.nz/file/A4YSEZaA#0Jk3_jH8uVtMnATciVRtWw2r_SH0NPLq4P6SrGNuwJQ)
telegra.ph
Go here and do this
Click to expand...
Click to collapse
same thing dident work
Same problem here with xiaomi 9pro
After the update in android 11, (made from the phone (locked)) the 256gb card if it's inside it makes the phone rebooting continuesly..
If its outside the phone, works normally