Develop Bugs

Change Miui 10 stable chinese version to Miui 10 stable GLOBAL version

Hello folks,
I bought a brandnew Mi Max 3 via Singapore. Unfortunately it was delivered with the chinese ROM version (now updated to Miui 10 CN).
Is there any step by step manual to flash my original phone to the Miui 10 global stable version. I need to use the german language and the google playstore
As far as I now global verion of Miui 10 is rolled out for the Mi Max 3.
Thanx for your help, friends.
MimaxXolli

Pretty sure you going to have use TWRP it other after unlocking.

In the same boat now, mine updated to 10 overnight Grrr. Got about 5 days to wait for the BL unlock now

I also have table China 10.0.3.0 and I want to unlock bootloader and install some global multilanguage rom. Which one should I install? Any link? I read about anti rollback and don't want to crash my phone.
Sent from my MI MAX 3 using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:55 PM ----------
I have 6/128gb version.
Sent from my MI MAX 3 using Tapatalk

Easy steps. Make sure the rom you are flashing to is the same or higher version
Twrp is not required
Save your files as unlocking bootloader will wipe device
Put your device in fastboot mode
Unlock bootloader, very important
Put your device in fastboot mode again
Download fastboot file https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Extract all files until you see the img files
Open miflash tool https://c.mi.com/thread-1220989-1-0.html
Put the path of the img files in there and click refresh
Select clean all and flash

Yes but which rom I have to install. Can you give me some links?
Sent from my MI MAX 3 using Tapatalk

samson09 said:
Yes but which rom I have to install. Can you give me some links?
Sent from my MI MAX 3 using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
This one
Fastboot:
Global:
Stable (MIUI 10 V10.0.1.0.OEDMIFH) (ANTI ROLL-BACK ACTIVATED)
Click to expand...
Click to collapse

I am in the exact same situation. I thought going from 10.0.3.0 CN to 10.0.1.0 Global would activate antirollback? Or is this safe? Thank you.

impossible install global version with twrp, anyone could install it? tell me please, for me its impsible, i tried 15 times and allways bootloop, thanks

zed011 said:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
This one
Click to expand...
Click to collapse
jorgeepelos said:
impossible install global version with twrp, anyone could install it? tell me please, for me its impsible, i tried 15 times and allways bootloop, thanks
Click to expand...
Click to collapse
I was able to install Global 10.0.1.0 using
https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html
and fastboot ROM from
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503

Well!
It is relatively easy to convert from official China rom to official Global rom on my China Mi Max 3 via the Miflash Tool Beta, which I bought my set from Shenzhen, China back in July 2018.
Before 18-Oct-2018 (CN MIUI 10.0.3.0):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 19-Oct-2018 (Global MIUI 10.0.1.0):

Be careful with the mi flash tool. Select clean all, not any other option. Or else your bootloader will be relocked and you will get a brick.

I did encounter a problem during the 1st flashing process with the Beta Tool. "Remote : cannot read command" at the end of flahing
What I did was reinstalled all drivers using the latest miflash tool. Reboot pc, and then I used back the Beta Tool again to flash. Bingo!
FYI, all versions of official miflash tools don't work on my Windows 10 pc stating that "Length cannot be less than zero"!

wilfogn said:
I was able to install Global 10.0.1.0 using
https://www.xiaomigeek.com/download-xiaomi-mi-flash-tool.html
and fastboot ROM from
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Click to expand...
Click to collapse
This not twrp.............
Enviado desde mi MI MAX 3 mediante Tapatalk

Anyone got problems with the 5GHz band on 10 stable? WiFi is poor. 2,4GHz no problem.

Hello ,
I'm now on china stable V9.6.11.0 unlocked bootloader , is it safe to flash global 10.0.1.0.O via fastboot?

marcoryn said:
Anyone got problems with the 5GHz band on 10 stable? WiFi is poor. 2,4GHz no problem.
Click to expand...
Click to collapse
I don't have 5GHz but I had some disconnections with 2.4GHz. I have no problems anymore since I switched my router to another channel.
buberon4o said:
Hello ,
I'm now on china stable V9.6.11.0 unlocked bootloader , is it safe to flash global 10.0.1.0.O via fastboot?
Click to expand...
Click to collapse
It's safe, only make sure to keep the bootloader unlocked by selecting the "Clean All" option in MiFlash.
1642wlmi said:
Sorry for question but i have the same problem. About 15 days ago my mi max 3 4/64 CN got an udate from 9.6.xx CN to 10.03.xx . It's safe if i use mi flash for go from 10.03 CN to 10.01 global or i have some problem with ARB?
Click to expand...
Click to collapse
No problems with ARB, I've already done it

Sorry for question but i have the same problem. About 15 days ago my mi max 3 4/64 CN got an udate from 9.6.xx CN to 10.03.xx . It's safe if i use mi flash for go from 10.03 CN to 10.01 global or i have some problem with ARB?
Thanks

1642wlmi said:
Sorry for question but i have the same problem. About 15 days ago my mi max 3 4/64 CN got an udate from 9.6.xx CN to 10.03.xx . It's safe if i use mi flash for go from 10.03 CN to 10.01 global or i have some problem with ARB?
Thanks
Click to expand...
Click to collapse
Yes! CN 10.0.3.0 to Global 10.0.1.0 is super safe as well!
Both are ARB rom! So, no worry!
I did exactly that 2 days ago! :fingers-crossed:

How to turn on unlocking face. I dont see this option
Wysłane z mojego MI MAX 3 przy użyciu Tapatalka

How To Guide A guide to unlock the bootloader

Edit: No guarantee that this will work!​
Disclaimer: Your warranty may be void after this procedure. I will not be responsible for any mishap that may happen after unlocking.
Backup you data! Device resets after unlocking!
Step 0: Enable developer options.
It is visible under Settings -> Additional settings after tapping 7 times on the build number.
Step 1: Install the apk linked below.
https://download.c.realme.com/flash/Unlock_tool/DeepTesting_X50pro_Q.apk
Step 2: Update this app by installing this -
https://forum.xda-developers.com/at...327195/?hash=232650ae3997a68a5743c72cdf121c9b
Step 3: Open the app and apply for deep-testing.
It takes sometime to get it reviewed and approved. My request took about a day to get enrolled in this deeptesting progam.
Step 4: Get the latest Android platform-tools and Google usb_driver for Windows. Extract wherever is comfortable for you.
Step 5: Reboot into the bootloader.
Connect the phone to your PC with the provided cable.
Enter the following in a cmd terminal where the extracted platform-tools are. Shift+Right click in that folder for getting the option to open a PowerShell terminal.
Note the prefix.
.\adb reboot bootloader
Step 5: Install the driver.
Open the device manager and right-click on the "Android" device. Choose "Update driver" option.
Select the manual installation option. Now, select the option at the top called "All devices".
Click the "Have Disk" button and then choose the .inf file in the usb_driver folder.
Choose "Android Bootloader Interface" option.
It will show "Operation completed successfully" message.
Step 6: Unlock time.
.\fastboot flashing unlock
Your device will show a warning.
Now is the time to rethink.
Vol up to proceed.
Now, the device will reset. Disconnect the cable and let it boot.

Ohhh....Good Job ¡¡ Thank you ¡¡

Teletubi said:
Ohhh....Good Job ¡¡ Thank you ¡¡
Click to expand...
Click to collapse
Happy to help
Do let me know of any issues

Does it work on realme q3i 5g bro ? Mine was 4/128gb version , rmx3042

Cuonglla117 said:
Does it work on realme q3i 5g bro ? Mine was 4/128gb version , rmx3042
Click to expand...
Click to collapse
It should work. Hardware is almost same.
This may work with all Realme models launched with 11
The only difference I found is that the radio (modem) has extra CDMA bands, irrelevant for unlocking.

crazo7924 said:
It should work. Hardware is almost same.
This may work with all Realme models launched with 11
The only difference I found is that the radio (modem) has extra CDMA bands, irrelevant for unlocking.
Click to expand...
Click to collapse
My q3i 5g unlocked sucessfully , thanks sir !

crazo7924 said:
It should work. Hardware is almost same.
This may work with all Realme models launched with 11
The only difference I found is that the radio (modem) has extra CDMA bands, irrelevant for unlocking.
Click to expand...
Click to collapse
Did u try any of gsi on your device please ? I wanna flash gsi but i dont know if it working or not .

Cuonglla117 said:
Did u try any of gsi on your device please ? I wanna flash gsi but i dont know if it working or not .
Click to expand...
Click to collapse
Not yet. I've tried the DSU loader in developer options (12 beta). Doesn't require fastboot.

crazo7924 said:
Not yet. I've tried the DSU loader in developer options (12 beta). Doesn't require fastboot.
Click to expand...
Click to collapse
thank you , but can i port twrp or custom recovery for this device

And what if deep testing gives out that the "phone model does not support deep testing "(rmx3242)?

I have realme narzo 30 4g and it says "failed to submit", "this model doesnt support deep testing".

I tried to unlock my device with this. (Realme 8 5G, identical twin) I get prompt saying this phone model doesn't support deep testing, what should I do?

alexmalek9274 said:
I tried to unlock my device with this. (Realme 8 5G, identical twin) I get prompt saying this phone model doesn't support deep testing, what should I do?
Click to expand...
Click to collapse
i think u need to use another deep testing apk

alexmalek9274 said:
I tried to unlock my device with this. (Realme 8 5G, identical twin) I get prompt saying this phone model doesn't support deep testing, what should I do?
Click to expand...
Click to collapse
I too have Realme 8 5G. I've not yet tried on the latest update.
Edit: it works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

crazo7924 said:
I too have Realme 8 5G. I've not yet tried on the latest update.
Edit: it worksView attachment 5432067
Click to expand...
Click to collapse

teketi13 said:
I have realme narzo 30 4g and it says "failed to submit", "this model doesnt support deep testing".
Click to expand...
Click to collapse
alexmalek9274 said:
I tried to unlock my device with this. (Realme 8 5G, identical twin) I get prompt saying this phone model doesn't support deep testing, what should I do?
Click to expand...
Click to collapse
I have same problem! Do we have a solution?

Hello guys, my Realme 8 5G face the same problem, and i'd try this instruction. This is my Deep Test result. " oplus Verify fail need to verify signature of another brand oplus Verify pass fastboot verify success fastboot_unlock_verify ok" What should i do next?
My Device had no Data Connection Because it downgrade to India ota_downgrade.zip File anyone can help me fix this problem?

BaldOne22 said:
Hello guys, my Realme 8 5G face the same problem, and i'd try this instruction. This is my Deep Test result. " oplus Verify fail need to verify signature of another brand oplus Verify pass fastboot verify success fastboot_unlock_verify ok" What should i do next?
My Device had no Data Connection Because it downgrade to India ota_downgrade.zip File anyone can help me fix this problem?
Click to expand...
Click to collapse
I also downgrade, and the version was probably the same for India. I had to send it to service, wait 2 weeks. They changed motherboard ( I don't know why ) and returned with BETTER FASTER SMOOTHER UI 2.0.
After I messed with ADB and face a boot-loop, to solve the problem I had to update again to laggier and awkward UI 3.0. So now I have to revert to UI 2.0 and don't know how.
I assume a Global rollback package can solve your problem also.

BaldOne22 said:
Hello guys, my Realme 8 5G face the same problem, and i'd try this instruction. This is my Deep Test result. " oplus Verify fail need to verify signature of another brand oplus Verify pass fastboot verify success fastboot_unlock_verify ok" What should i do next?
My Device had no Data Connection Because it downgrade to India ota_downgrade.zip File anyone can help me fix this problem?
Click to expand...
Click to collapse
Step 6

I can't install the app it say it conflicts with another app package

Question How do I re-flash the China version of OP9RT from OxygenOS to ColorOS?

I am using OxygenOS in the China version of OnePlus 9RT. Is it possible to switch back to ColorOS?
If there is such a forum, I would appreciate it if you could paste it in your reply.
I am Japanese and use some English and translation tools, so my English may be strange.

What oxygenOs version are you using? A12 or A13?

donkeyman1234 said:
What oxygenOs version are you using? A12 or A13?
Click to expand...
Click to collapse
I'm using OOS 13.

m0. said:
I'm using OOS 13.
Click to expand...
Click to collapse
My phone comes with COS13, but I changed it to OOS13. Then I downgraded to OOS12. I have seen an article about changing OOS12 to COS12, maybe you can do that then update to COS13. But backup your data before doing any move.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com

donkeyman1234 said:
My phone comes with COS13, but I changed it to OOS13. Then I downgraded to OOS12. I have seen an article about changing OOS12 to COS12, maybe you can do that then update to COS13. But backup your data before doing any move.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com
Click to expand...
Click to collapse
How did you downgrade to OOS12?

m0. said:
How did you downgrade to OOS12?
Click to expand...
Click to collapse
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com

donkeyman1234 said:
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com
Click to expand...
Click to collapse
Are there any caveats, such as not being able to downgrade the rollback ROM via local OTA? Also, does developer options enabled or disabled affect whether downgrading via OTA is possible or not?

m0. said:
Are there any caveats, such as not being able to downgrade the rollback ROM via local OTA? Also, does developer options enabled or disabled affect whether downgrading via OTA is possible or not?
Click to expand...
Click to collapse
I asked this question because I got a warning that I could not downgrade when I tried to change the China version of OP7T from OOS12 to OOS10.

You have to use roll-back firmware to downgrade.
m0. said:
Are there any caveats, such as not being able to downgrade the rollback ROM via local OTA? Also, does developer options enabled or disabled affect whether downgrading via OTA is possible or not?
Click to expand...
Click to collapse
you have to use roll-back firmware to downgrade. After that, the phone just look like new one, you have to setup everything.
Right now I am back to A11 for testing. Again flash back to OOS13.

m0. said:
I asked this question because I got a warning that I could not downgrade when I tried to change the China version of OP7T from OOS12 to OOS10
Click to expand...
Click to collapse
only oos12 to oos11, then oos11 to oos10

donkeyman1234 said:
only oos12 to oos11, then oos11 to oos10
Click to expand...
Click to collapse
Thanks for everything. I'll try to do more tomorrow, so I'd appreciate it if you could give me some advice.

donkeyman1234 said:
My phone comes with COS13, but I changed it to OOS13. Then I downgraded to OOS12. I have seen an article about changing OOS12 to COS12, maybe you can do that then update to COS13. But backup your data before doing any move.
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
community.oneplus.com
Click to expand...
Click to collapse
Hello, how do you flash to OOS13 ? I am also at COS13 now, but I dont see any OOS13 rom to be flashed. And may I know why do you flash back from OOS 13 to COS 13? I saw the link you attached above is for oneplus 9r, not 9rt, is both phone's ROM compatible?

diontan said:
Hello, how do you flash to OOS13 ? I am also at COS13 now, but I dont see any OOS13 rom to be flashed. And may I know why do you flash back from OOS 13 to COS 13? I saw the link you attached above is for oneplus 9r, not 9rt, is both phone's ROM compatible?
Click to expand...
Click to collapse
I unlocked the bootloader, then flashed 9RT OOS13 fastboot ROM.

donkeyman1234 said:
only oos12 to oos11, then oos11 to oos10
Click to expand...
Click to collapse
When I downgrade from OOS13 to 12 and then read the COS13 file by local update, I get Verification failed. Is there any solution for this?

m0. said:
When I downgrade from OOS13 to 12 and then read the COS13 file by local update, I get Verification failed. Is there any solution for this?
Click to expand...
Click to collapse
you should change oos12 to cos12 then cos12 to cos13

donkeyman1234 said:
I unlocked the bootloader, then flashed 9RT OOS13 flastboot ROM.
Click to expand...
Click to collapse
i already unlock my bootloader, may you send me the OOS 13 ROM ? I only found android 11 rom here in this forum, where the latest was A.11. I saw comments that said flashing from COS to OOS only applicable for same android version, if we use as downgrade or upgrade, we might brick the phone. The threads where I found OOS rom is from below. I don't see OOS13 ROM inside the thread
[FASTBOOT][ROM][UNOFFICIAL][OP9RT] OxygenOS A.04-A.08 for MT2110 devices
Greetings, I've appreciated @abhinavgupta371, @HELLBOY017 for initial version of this firmware and @penguinus for continuous support and testing. PLEASE NOTE THAT FASTBOOT ROMS CAN ONLY BE USED IN DEVICES WITH AN UNLOCKED BOOTLOADER!!! AND BE...
forum.xda-developers.com

diontan said:
i already unlock my bootloader, may you send me the OOS 13 ROM ? I only found android 11 rom here in this forum, where the latest was A.11. I saw comments that said flashing from COS to OOS only applicable for same android version, if we use as downgrade or upgrade, we might brick the phone. The threads where I found OOS rom is from below. I don't see OOS13 ROM inside the thread
https://forum.xda-developers.com/t/...oxygenos-a-04-a-08-for-mt2110-devices.4404719
Click to expand...
Click to collapse
See conversation

donkeyman1234 said:
Delete
Click to expand...
Click to collapse
Sorry, may i know what 'Delete' means here ?

donkeyman1234 said:
you should change oos12 to cos12 then cos12 to cos13
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried with 12 and 13 and it still happens.

you should
m0. said:
View attachment 5812213View attachment 5812215
I tried with 12 and 13 and it still happens.
Click to expand...
Click to collapse
try use fastboot rom not direct update.(like cos13 to oos13)

Question Help needed to return to Android 12 stable

I opted in for the beta of A13 with my Vivo X80 Pro (Europe version).
The battery drain gets worse every week.
Now I found out that to downgrade to the stable version, I need to send the phone to VSP Data.
That is on the other side of Europe for me.
So, I want to downgrade it myself.
How to do this? Because all the tutorials I found online are outdated, incorrect or incomplete.
At the moment PD2185BF_EA_A_13.1.11.7.W30 is installed.
I did a lot of custom ROM with the HTC HD2, Samsung S3 and Xioami's before. But cant get this simple downgrade to go
Who can guide me with a complete tutorial and working drivers (for Windows 11 Enterprise)?

If you have the Mediatek version, you may have some luck experimenting with mtkclient. We do such downgrades on 1+ Nord2 without bootloader unlock, so it might be possible to do something similar here as well.
If you don't think you have the chops to figure it all out, wait till somebody with your device does though.

The EU version (W30) is the Snapdragon variant.

Welp, if the official instructions don't work for you (people have mixed success with it), you're indeed hosed and you'll have to send it in.

I suggest going to the service center if there is one in your country. They can downgrade it there.
Or just wait until stable or more capable beta versus on of A13 is up.

Sorry if someone already mentioned this but have you tried the Vivo downgrader computer application? It's the only thing that let me downgrade. I do have the Chinese version though so I am not sure if it only works on that.
https://zs.vivo.com/upload/aftool/downgrader-setup.exe

Music&Art said:
Sorry if someone already mentioned this but have you tried the Vivo downgrader computer application? It's the only thing that let me downgrade. I do have the Chinese version though so I am not sure if it only works on that.
https://zs.vivo.com/upload/aftool/downgrader-setup.exe
Click to expand...
Click to collapse
This looks to be a Chinese program.
I'm afraid it will brick my phone since my ROM is EU and not Chinese.

HellStorm666 said:
I opted in for the beta of A13 with my Vivo X80 Pro (Europe version).
The battery drain gets worse every week.
Now I found out that to downgrade to the stable version, I need to send the phone to VSP Data.
That is on the other side of Europe for me.
So, I want to downgrade it myself.
How to do this? Because all the tutorials I found online are outdated, incorrect or incomplete.
At the moment PD2185BF_EA_A_13.1.11.7.W30 is installed.
I did a lot of custom ROM with the HTC HD2, Samsung S3 and Xioami's before. But cant get this simple downgrade to go
Who can guide me with a complete tutorial and working drivers (for Windows 11 Enterprise)?
Click to expand...
Click to collapse
Does Vivo not have service in your country? I also tried donwgrade, but unfortunately I didn't find any working tools, ROMs, or procedure....
I have the same FW version as you and I have no battery problem. Check your apps. Often some update with gplay fails and then there is excessive consumption.

How about this?
Vivo X80 Pro PD2185F_EX_A_12.0.12.5.W30.V000L1 upgrade downgrade ROM
Download Vivo X80 Pro PD2185F_EX_A_12.0.12.5.W30.V000L1 update file, you can use it for upgrade & downgrade
romprovider.com

Music&Art said:
How about this?
Vivo X80 Pro PD2185F_EX_A_12.0.12.5.W30.V000L1 upgrade downgrade ROM
Download Vivo X80 Pro PD2185F_EX_A_12.0.12.5.W30.V000L1 update file, you can use it for upgrade & downgrade
romprovider.com
Click to expand...
Click to collapse
Tried it, but doesn't work.

xBenny said:
Does Vivo not have service in your country? I also tried donwgrade, but unfortunately I didn't find any working tools, ROMs, or procedure....
I have the same FW version as you and I have no battery problem. Check your apps. Often some update with gplay fails and then there is excessive consumption.
Click to expand...
Click to collapse
They did, that is why I bought the phone.
But after 2 months they stopped.
Never a Vivo phone for me ever again.

HellStorm666 said:
This looks to be a Chinese program.
I'm afraid it will brick my phone since my ROM is EU and not Chinese.
Click to expand...
Click to collapse
It works fine. I used it myself to downgrade to A12

thepublocal said:
It works fine. I used it myself to downgrade to A12
Click to expand...
Click to collapse
I tried to run the tool just now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google translate says that it says "there is currently no version to downgrade to"

HellStorm666 said:
I tried to run the tool just now.
View attachment 5829891
Google translate says that it says "there is currently no version to downgrade to"
Click to expand...
Click to collapse
Ahhh I'm on Chinese version of the phone. Origin OS.

So... it gets even worse.
UK site has a newer version of A12 (PD2185F_EX_A_12.0.14.1.W30.V000L1) of the 16th of December.
X80 Pro Funtouch OS PD2185F_EX_A_12.0.14.1.W30.V000L1 System Update | vivo United Kingdom
Download X80 Pro Funtouch OS PD2185F_EX_A_12.0.14.1.W30.V000L1 (2022-12-16, 5734.4). Learn more about how to download and update by official tutorials and tools.
www.vivo.com
And the 'local upgrade' function on the phone worked. (for the first time of all the tries).
But after the restart, it said the upgrade failed because the installed version is newer.

HellStorm666 said:
So... it gets even worse.
UK site has a newer version of A12 (PD2185F_EX_A_12.0.14.1.W30.V000L1) of the 16th of December.
X80 Pro Funtouch OS PD2185F_EX_A_12.0.14.1.W30.V000L1 System Update | vivo United Kingdom
Download X80 Pro Funtouch OS PD2185F_EX_A_12.0.14.1.W30.V000L1 (2022-12-16, 5734.4). Learn more about how to download and update by official tutorials and tools.
www.vivo.com
And the 'local upgrade' function on the phone worked. (for the first time of all the tries).
But after the restart, it said the upgrade failed because the installed version is newer.
Click to expand...
Click to collapse
can you upload apk com.iqoo.aftersale.engineermode ?

HellStorm666 said:
I tried to run the tool just now.
View attachment 5829891
Google translate says that it says "there is currently no version to downgrade to"
Click to expand...
Click to collapse
Press on the blue text below, it will go to another window
It'll open up a window for downgrade files

ko_hi said:
Press on the blue text below, it will go to another window
It'll open up a window for downgrade files
Click to expand...
Click to collapse
The translation says backup.

HellStorm666 said:
The translation says backup.
Click to expand...
Click to collapse
I must check how i did it, which version duo you have?

Question How put EEA rom on Xiaomi 13 ULTRA china

I friend,
I have an Xiaomi 13 Ultra with China ROM,
Now Xiaomi realeased the EEA ROM,
How I Can install the EEA ROM official on my Xiaomi 13 Ultra?

With Miflash(DONT RE LOCK THE BOOTLOADER)
BOOTLOADER MUST BE UNLOCKED
Unlock bootloader
Xiaomi Community
new.c.mi.com
Apply for unlocking Mi devices
en.miui.com
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com

Ok thanks friend.
I am in waiting for the unlock bootloader!
is there a mode to not wait the 167 hour?

REDUTOPIAxda said:
Ok thanks friend.
I am in waiting for the unlock bootloader!
is there a mode to not wait the 167 hour?
Click to expand...
Click to collapse
Nope.
See also XiAOMI EU ROM (better than stock).

NOSS8 said:
Nope.
See also XiAOMI EU ROM (better than stock).
Click to expand...
Click to collapse
Thanks, but I prefer the stock version.

REDUTOPIAxda said:
Thanks, but I prefer the stock version.
Click to expand...
Click to collapse
With a Stock ROM you will need to root the phone and use Magisk modules for the device to be certified.

what purpose does it serve?

REDUTOPIAxda said:
what purpose does it serve?
Click to expand...
Click to collapse
If the play store is not certified, no Netflix, etc. and the banking apps do not work.
This is due to the unlocked bootloader on a stock rom.

ok I am now on MIUI EEA.
Flash ok..
Very thanks!

I installed EEA. Have hard time to sign in to google in the beginning...but I found way around...
(disable network/pass initial set up/log in again)

NOSS8 said:
If the play store is not certified, no Netflix, etc. and the banking apps do not work.
This is due to the unlocked bootloader on a stock rom.
Click to expand...
Click to collapse
Could you give to me a guide?

REDUTOPIAxda said:
Could you give to me a guide?
Click to expand...
Click to collapse
Root:
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM Dear Xiaomi 13 user, I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems...
forum.xda-developers.com
Magisk+Zygisk
Download Shamiko [Zygisk Module] Magisk | MagiskRoot
Download Shamiko Zygisk Module Latest Version for Magisk. It requires Magisk v24.1+ and can be used to Hide root to run Bank Apps.
magiskroot.net
Safetynet
Download Universal SafetyNet Fix [Magisk Module]
Download Universal SafetyNet Fix Magisk Module Latest Version. Passes Play Integrity API, SafetyNet, CTS Profile Match, & Basic Integrity.
magiskroot.net

Hi there, i've just got my CN rom 13 ultra but can't proceed with unlock and flash because of certain issues.
1) I can't use the latest Miunlock version because it gets detected as a virus by McAfee. The version i'm currently on is 6.5.224.28, is that sufficient for 13 ultra?
2) On Miflash i'm told to install certain things, how do i find them for download? I could click on continue but i don't know if it'd work properly nor would i like to risk bricking my new phone due to some unforeseen errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance

Also, has anybody tested out the camera system? Mine seems to use the same lens for 1x 3.2x and 5x zoom, no idea if it's a CN rom thing....
EDIT: unchecking "auto adjust lens" fixed that

jeff121212 said:
Hi there, i've just got my CN rom 13 ultra but can't proceed with unlock and flash because of certain issues.
1) I can't use the latest Miunlock version because it gets detected as a virus by McAfee. The version i'm currently on is 6.5.224.28, is that sufficient for 13 ultra?
2) On Miflash i'm told to install certain things, how do i find them for download? I could click on continue but i don't know if it'd work properly nor would i like to risk bricking my new phone due to some unforeseen errors.
Thanks in advance
Click to expand...
Click to collapse
No viruses.
The tutorial is here:
How put EEA rom on Xiaomi 13 ULTRA china
I friend, I have an Xiaomi 13 Ultra with China ROM, Now Xiaomi realeased the EEA ROM, How I Can install the EEA ROM official on my Xiaomi 13 Ultra?
forum.xda-developers.com
Correct the path.
For the error create an empty TXT file of the same name.

Thanks, i opened the newest MiFlash without issue. I have a mi account tied to my current xiaomi phone, should i continue to register a new account, which will remove the previous one? Will that render my current phone unusable?

jeff121212 said:
Thanks, i opened the newest MiFlash without issue. I have a mi account tied to my current xiaomi phone, should i continue to register a new account, which will remove the previous one? Will that render my current phone unusable?
Click to expand...
Click to collapse
Why use the other account (explanations)?

I'm not sure, but i probably used the same email to either attempt to flash another phone or for my current phone, i can't remember which, as i am using now to log into MiUnlock.
what would happen if i proceed, will i lose ability to use any of my current phones?

jeff121212 said:
I'm not sure, but i probably used the same email to either attempt to flash another phone or for my current phone, i can't remember which, as i am using now to log into MiUnlock.
what would happen if i proceed, will i lose ability to use any of my current phones?
Click to expand...
Click to collapse
The answer is indicated in the screenshot.

Not exactly, it says i won't be able to access the account, not unable to use the phone itself. Now i can't remember if a xiaomi account needs to exist and be tied with a phone for it to be fully usable