Related
I am not responsible for anything that may occur.
Most of the GSI's need SELinux Permissive status. This cannot happen with boot.img because of Vendor. So we have to use Magisk to make Permissive. This is for old GSI's. If you are gonna use new GSI's from Erfan and Phhusson check the end of the thread.
1- You need a working GSI installed(HavocOS works). https://sourceforge.net/projects/havoc-os/files/arm64-aonly/
2- You need to install Magisk. I installed v19.3.
3- You need TWRP recovery. I use 3.3.0. And make sure you disabled your data encyrption.
4- You need a Permissiver. With Magisk SELinux Manager module we are patching SELinux systemlessly.
*After installing Magisk reboot. Then add this module in Magisk Manager and reboot(Follow steps on guide. Volume up to confirm, after volume down to select permissive). https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042 You don't need latest. Just download 1.0 from Attached Files. I used that.
* Go to about on your settings. You should see in bottom permissive status. If you see enforcing go back and fix what you have done wrong. After making permissive go to TWRP recovery. In recovery make sure data is mounted in Mount. Then go to Advanced > File Manager. In there open data folder and delete everything other than adb, app, media. Then go to app folder and delete everything other than com.topjohnwu.magiskxxx.
* Now you should only have adb, app/com.topjohnwu.magisk(xxx), media. Exit from File Manager and go to Backup. Choose only Data. Then swipe to backup. Backup stored in /sdcard/TWRP, /data/media/0/twrp. That's why we didn't delete media folder. And don't ever wipe Internal storage(Your backup in there.).
5- But you can wipe data and that excludes backup. So wipe Dalv, system, data and cache. And then in Restore your backup and you should get your Magisk and Modules back(You can see adb and app folder by remounting).
6- Flash any GSI you want. If you want to install GApps stock version go to mount and uncheck Mount system partition read-only and tick system on the top. Go to Wipe> Advanced Wipe> Check system> Repair or Change File system> Resize File System> Swipe to resize. This will make your space 3600mb again. Your system files will not be touch. Now you can install gApps zip.
Working OxygenOS: https://drive.google.com/open?id=1GPGWJu3lUeheUO2iGSNHQWEPiYgeF3DY
LINKS to GSI's: https://docs.google.com/document/d/123s7H37wHKqlxn8rIBQmG_DvffgTVZv3hO-uiy7N-sk/edit?usp=sharing
Some Files if needed = https://drive.google.com/drive/folders/1yFJl-teTlbSWilgJIgN317Ba2FFVRSaO?usp=sharing
Tested on Version V16.0615.1908.109.
As of today, Android Q/10 is working. https://github.com/phhusson/treble_experimentations/releases
Wipe dalv, system, data, cache. Flash img, then flash Magisk-phh.zip.
For Erfan:
Since 25.09.2019, all new ErfanGSI's will work on our devices. Check the date. It should be newer than 20190925. No need to flash Permissiver or Zygote fix.
You need to flash stock boot.img. Mount vendor and delete /vendor/overlay in Advanced > File Manager to fix Pixel Launcher crash. If you want to backup vendor.img follow this guide.
Telegram Channel:https://t.me/Zenfone5GSI
In Turkish Language: https://docs.google.com/file/d/1GKlOl68vOngXAMfvj9rV6YZ9Wq8AC4JG7m7AdIf6i74/view
Thank you very nice work in the telegram group, I would appreciate it if you help us
LifefesTR said:
Thank you very nice work in the telegram group, I would appreciate it if you help us
Click to expand...
Click to collapse
What help do u need? Contact me from telegram and I will try to help.
emincangencer said:
What help do u need? Contact me from telegram and I will try to help.
Click to expand...
Click to collapse
I've done the way step by step ... but when I install Evolution Erfan GSI still not boot..When I see the file manager in Twrp..Is open the data ..like ADB, Media, app is the lost.. I restore again ... still not boot... I again see in twrp...file manager,,data/app,media,adb is lost again..Why?? Is there anything wrong ?
albarudin said:
I've done the way step by step ... but when I install Evolution Erfan GSI still not boot..When I see the file manager in Twrp..Is open the data ..like ADB, Media, app is the lost.. I restore again ... still not boot... I again see in twrp...file manager,,data/app,media,adb is lost again..Why?? Is there anything wrong ?
Click to expand...
Click to collapse
In twrp "adb push C:\Users\Emincan\.android\adbkey.pub /data/misc/adb/adb_keys". Reboot. In bootanimation "adb shell getenforce". If answer is permissive, it should work. If it's enforce, you have done something wrong.
I have done this on Vendor Version V16.0615.1908.109. Maybe that's affecting.
And make sure you are doing it with https://sourceforge.net/projects/evolution-x/files/GSI/Evolution-9.0-GSI-ARM64-AONLY-20190811.zip/download
emincangencer said:
In twrp "adb push C:\Users\Emincan\.android\adbkey.pub /data/misc/adb/adb_keys". Reboot. In bootanimation "adb shell getenforce". If answer is permissive, it should work. If it's enforce, you have done something wrong.
I have done this on Vendor Version V16.0615.1908.109. Maybe that's affecting.
And make sure you are doing it with https://sourceforge.net/projects/evolution-x/files/GSI/Evolution-9.0-GSI-ARM64-AONLY-20190811.zip/download
Click to expand...
Click to collapse
ok sir...thanx you
sir...please help me,how the fix dt2w in the rom gsi
link for image oxygen os please on google drive link error
phentem said:
link for image oxygen os please on google drive link error
Click to expand...
Click to collapse
I deleted them because it's outdated. U can find it on https://t.me/VegaGSIs
Source code: (Unmodified)
Device tree: https://github.com/DevelopedInside/android_device_wileyfox_marmite
Kernel: https://github.com/DevelopedInside/android_kernel_wileyfox_msm8937
Vendor: https://github.com/DevelopedInside/proprietary_vendor_wileyfox
New Rom
http://www.mediafire.com/file/dv69tdgx9r99e3f/crDroidAndroid-9.0-20200219-marmite-v5.11.zip
crDroidAndroid-9.0-20200312-marmite-v5.12
New Rom
March security update
lineageOS String updated to 5.12
http://www.mediafire.com/file/gejbk30o1lev8vs/crDroidAndroid-9.0-20200312-marmite-v5.12.zip/file
Robin..what it's working? And what not?
Tnx :All it's OK!
I find a bug//
in Whatsapp its having a problem with recording an audio message// ??*
ciobaneasca said:
I find a bug//
in Whatsapp its having a problem with recording an audio message// ??*
Click to expand...
Click to collapse
Suppect its a Whatsapp problem (Facebook you know) Try a lineage 16.0 rom and see if it works there?
robin0800 said:
Suppect its a Whatsapp problem (Facebook you know) Try a lineage 16.0 rom and see if it works there?
Click to expand...
Click to collapse
I think so too...
I found a 2 bug..with Google pixel launcher..it's crushing system ui on first load after restart device..when I press button to see which apss are opened..
ciobaneasca said:
I think so too...
I found a 2 bug..with Google pixel launcher..it's crushing system ui on first load after restart device..and press button to see which apss are opened..
Click to expand...
Click to collapse
I will build a linage 16.0 rom and upload it probably tomorrow.
robin0800 said:
I will build a linage 16.0 rom and upload it probably tomorrow.
Click to expand...
Click to collapse
An clean build of Los?
This is version of Pixel Launcher..
/lineage-16.0-20200322-UNOFFICIAL-marmit
Not the right pla\ce but here it is.
http://www.mediafire.com/file/ails9jgqwbr0kcq/lineage-16.0-20200322-UNOFFICIAL-marmite.zip/file
robin0800 said:
Not the right pla\ce but here it is.
http://www.mediafire.com/file/ails9jgqwbr0kcq/lineage-16.0-20200322-UNOFFICIAL-marmite.zip/file
Click to expand...
Click to collapse
You test it? Or just compiled?
ciobaneasca said:
You test it? Or just compiled?
Click to expand...
Click to collapse
I tested it.... Whatsapp still does not record.
But yes I just compiled I am not a developer
robin0800 said:
I tested it.... Whatsapp still does not record.
But yes I just compiled I am not a developer
Click to expand...
Click to collapse
OK..tnx for information..
Then...I'm not installing it.. Because I have cR Droid..with the same bugs..
Sow..Robin..what we have? 2 Roms with the same bugs?
1). Bug with the Sound ( WhatsApp no rec. Sound messages, and Distorted sound in phone when you make a call in speaker mode)
2). Bug with Pixel Launcher ..crushing system Ui ( When press button to see history off opened apps)
3). Battery drain.
4). Hot device when watching video on youtube or facebook.
Who can fix that..??
crDroidAndroid-9.0-20200426-marmite-v5.12
New Rom With April Security Patch
https://www.mediafire.com/file/f0xevve8oew6f99/crDroidAndroid-9.0-20200426-marmite-v5.12.zip/file
robin0800 said:
New Rom With April Security Patch
https://www.mediafire.com/file/f0xevve8oew6f99/crDroidAndroid-9.0-20200426-marmite-v5.12.zip/file
Click to expand...
Click to collapse
@robin0800 will you be making an update to the lineage 16 ROM or was that a one off? thanks.
crDroidAndroid-9.0-20200511-marmite-v5.12
New Rom with May security patch
http://www.mediafire.com/file/xmuq9irqi3tat38/crDroidAndroid-9.0-20200511-marmite-v5.12.zip/file
Rom review
robin0800 said:
New Rom with May security patch
Selinux doesn't work but o well never really care about whether it is enforced or disabled much anyway I did once manage to get selinux working through prop edits... or once using an app but fingerprint stopped working
Most other things seems to be working fine which is great
Official crdroid for Marmite has same issue but it is older version
Sometimes the torch stop working reboot fixes it and restarting system ui crashes the entire os repeatedly so this requires a reboot using the actual buttons
This is probably the best Android 9 rom for the swift 2 so much cool functionality and it would be sik to use a stable crdroid 6 Marmite rom
Click to expand...
Click to collapse
this phone its so old, and i play again nice, thank for dev
how install the magisk ? thank
Allow OEM unlocking from developer options first
Cedoresti said:
this phone its so old, and i play again nice, thank for dev
how install the magisk ? thank
Click to expand...
Click to collapse
READ EVERYTHING FIRST NOT IN CHRONOLOGICAL ORDER Assuming you're on marmite you will have to go to XDA and go on Wileyfox Swift 2 ROMs, Kernels, Recoveries, & Other Development then click on lineage 15.1 rom download TWRP 3.2.3 from the link near to it this TWRP is the best one coz it can read the internal storage official TWRP is 3.3.1 but doesn't support internal storage so its not good once you have done that go to magisk.me and then download the magisk 20.4 flashabke zip file. Then next part is annoyimg. You will need a pc there is an app on the phone but i have never tested it and you probably not gonna have 2 phones in he first place maybe a tablet but anyway you will have download minimal adb and fastboot from any site that you think is appropriate your phones drivers should automatically install unless you have a bad os or something if they don't you will need to look into how to find your phones driver with research but you may not find them even after doing that anyway so assuming you have minimal adb and fastboot running and your phone s drivers are installed to confirm whether it has worked type in adb devices and press enter your device should come up as connected also I forgot to mention you need to on to about phone on settings system on build number a few times to unlock developer options the go to settings system developer options Enable Android debugging back to before once you have typed in adb devices a popup may come in your phone press yes allow in future option if you trust the device you're using once you press yes your device is usable you need to enable USB mass storage and copy twrp to your computer now for Windows 10 as I've only done this on windows 10 press on start and locate minimal adb and fastboot right click on it and press open file location if it comes up with the shortcut which I'm guessing it has right click on minimal adb shortcut and then open file location you will need to copy the TWRP file to there and rename the TWRP IMG to twrp.img go back to minimal adb and fastboot and also put your phone in fastboot mode now I think as soon as you turn your phone off it should go to fastboot mode if not then search how to do it coz I can't be asked writing every detail. Your phone will be factory data reset in the process this is for data security we'll come back to that later you may lose your warranty but that's not a problem if you know how to take care of your phone now on minimal and and fastboot type in fastboot oem unlock you should backup your data first go on settings system backup assuming you have Google services and play installed which I'm pretty sure you do all your data will be backed up and restored once you restore from cloud on the setup process after resetting coz of unlocked bootloader. Once you have accepted the bootloader unlock and it has been successfully unlocked turn if the device plug it in computer and type in on minimal
ADB and fastboot type in fastboot flash recovery
twrp.img now if you copied the files
In the correct directory as described before the recovery should have installed in a few seconds one problem is at the start the recovery might be getting replaced by stock recovery but after entering it a few times using power button and volume down button simultaneously should take you to the recovery you are going to see a message on your phone saying bootloader unlocked blah blah blah wait a few seconds or press power button and you will be in the recovery now your device may be encrypted type in your phone password/pin and you will be able to read internal storage press on select storage internal storage and press on download folder and then press on the magisk file you downloaded the swipe to install and you are installing root using magisk you should keep your device encrypted for security purposes now that you have twrp it can be used to bypass your screen unlock unless you have encrypted your device my marmite device encrypted the device automatically on the stock operating system another thing is that if you want to use your banking app go onto settings hide magisk manager option press ok and then the name of the magisk manager app should now be manager also go back to the settings and snake magisk hide option then restart the app and then go to the menu icon and magisk hide and then press in the app you want access to it should now be ticked and root should be hidden from the app my guide isn't perfectly layed but should have the important information you need know was writing it from the top of my head without punctuation:good:
i have ready 3.2.3-0. ONLY 3.2.2 ITS OK ?
Hi all.
I wanted to share my experiences with you all.
I have the last couple of days run this rom as my daily driver - and I must say, that this is by far the best I have tried yet.
The rom is very fast and so far all features that I have used have worked perfect right out of the box.
I will link you to the rom and write a short guide to how I made it stable and usefull.
Hope more of you will enjoy running Android 11 (R) on your P20 Lite - Mine is ANE-LX1 hw/eu but this should run on all versions.
First som screenshots from my phone:
Links to files:
set-bl-key_TishSerg4pda - https://drivemere.com/drive/ne
TWRP-oreo-smart.img - https://drivemere.com/drive/nf
CAOS R 300I+ ROM - https://drivemere.com/drive/ng
Ekstra:
Netflix apk (this one will work on android 11) - https://drivemere.com/drive/nd
NB: None of these files are created by me so please help support the creators by donating to maintain their work.
Guide:
Requirements: Unlocked phone - Guess you alle have this by now.
I started off from EMUI 9.1.0.370.
First off i installed the TWRP from bootloader to ramdisk_recovery.
fastboot flash ramdisk_recovery TWRP-oreo-smart.img
Then boot phone to recovery
(Star phone - in eRecovery choose to reset to factory default - type in "yes" and the phone will boot to TWRP.
In TWRP go to "wipe" -> advanced -> Select Dalwik Cache, Cache, Data and System. Swipe to wipe.
Now go to install -> select img -> choose CAOS image and flash to "system image" - DO NOT REBOOT SYSTEM!
Select wipe -> slide to factory reset.
Now you can boot the phone to the startup-screen.
Set up the phone and go to Play Store. Install the app named Treble Info (just search it)
Look in the app to what kind of "Treble and VNDK" used by your phone - Mine was using VNDK version 28.
This next part is a bit tricky!!
Boot to the recovery (as described above -> eRecovery -> factory default -> TWRP recovery.
Now go to mount - make sure that "system" is selected.
Go to advanced -> File Manager.
Now go to folder system -> system -> system_eks -> apex
You will most likely find som folders named (xxx=something):
xxxx.vndk.27
xxxx.vndk.28
xxxx.vndk.29
xxxx.vndk.current
Since my was using 28 I could chose to enter folder .27 and mark the blue folder in the down right corner
Choose to delete folder.
This will free up approx. 1GB system memory to install apps on the phone.
I hope you will like this rom as much as I have during the last week.
Please leave any feedback..
It has been many years, I haven't uploaded rom. I hope I succeed without any problems. thanks
whitetigerdk said:
Please leave any feedback
Click to expand...
Click to collapse
Tried afternoon "caos-v300l-210117-arm64-bvZ.img.xz" ROM, I installed it like any other GSI Treble ROM - flashing extracted .img file from fastboot & factory reset.
Maybe it's an easier way...
tried this myself.. wouldn't boot.. but through TWRP there was no problem
Might be working for some to flash it directly from fastboot:
fastboot flash system "caos-image-file".img
Anyway -still need the TWRP to delete the files from system folder - som might as well use it when it's available
whitetigerdk said:
Anyway -still need the TWRP to delete the files from system folder - som might as well use it when it's available
Click to expand...
Click to collapse
You can simply use root explorer (Solid Explorer etc.)
-Alf- said:
You can simply use root explorer (Solid Explorer etc.)
Click to expand...
Click to collapse
Well.. only if you root the ROM first. This one is not rooted by default. (I prefer it like this) so if you follow my guide - TWRP is the way to do it.
Yes there might be more ways to go there but I wanted to do a simple step-by-step guide easy to follow for beginners.
whitetigerdk said:
Well.. only if you root the ROM first. This one is not rooted by default.
Click to expand...
Click to collapse
Is that supposed to be a joke?
caos-v300l-210110-arm64-bgZ - "Z" means that the ROM is pre-rooted with SuperUser and there's is an option turn on/off root in phone settings.
No comment...
No comment...
It's such a waste of time. Have a nice day!
Where in settings should this be? Looked all over.. can't seem to find it..
Nevermind - found it.
Forgive me - it's been 10 years since I last worked with Android ROMs.. a lot has happened since then..
This might be a weird beginner question. But in description of rom image i find the AOSP sounds were replaced with Q Google ones. But I can not find any one of them. No notification, ringtone, alarm sounds present on the phone. Why is that? Where can I find them?
I used caos-v300l-210117-arm64-bgZ-lite.img using fastboot install over stock 9.1.0.374.
Sure, I could use 3rd party apps for that, but I hate to use them.
luka_bubi said:
This might be a weird beginner question. But in description of rom image i find the AOSP sounds were replaced with Q Google ones. But I can not find any one of them. No notification, ringtone, alarm sounds present on the phone. Why is that? Where can I find them?
Sure, I could use 3rd party apps for that, but I hate to use them.
Click to expand...
Click to collapse
I actually had the same.. no alarm sound or ringtones.. I just uploaded some mp3's to the phone and use those.. (ringtone is CTU phone from the serie "24"..)
luka_bubi said:
No notification, ringtone, alarm sounds present on the phone.
Click to expand...
Click to collapse
Everything can be found in "audio"folder. Go root/system/product/media/audio , you can copy sounds to the int.storage using root explorer (e.g. Solid explorer) .
-Alf- said:
Everything can be found in "audio"folder. Go root/system/product/media/audio , you can copy sounds to the int.storage using root explorer (e.g. Solid explorer) .
Click to expand...
Click to collapse
Thank you, that worked!
rom link is no longer working help plz!
[OFFICIAL] AOSP Q Mod // CAOS <= official tread by author
CAOS TrebleGSI <= latest version on SourceForge
luka_bubi said:
[OFFICIAL] AOSP Q Mod // CAOS <= official tread by author
CAOS TrebleGSI <= latest version on SourceForge
Click to expand...
Click to collapse
Whats agz bgz bzg lite bvz lite avz on the download section
stunteur said:
Whats agz bgz bzg lite bvz lite avz on the download section
Click to expand...
Click to collapse
an explanation can be found here
luka_bubi said:
] AOSP Q Mod // CAOS <= official tread by author
Click to expand...
Click to collapse
DISCLAIMER* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.PRE REQUIREMENTS:- SDK Platform-tools (Get it here)
-boot.img from Stock Rom
-Patience
LET'S BEGIN!
Extract the SDK Platform tools folder to an easily accessible directory
UNLOCKING THE BOOTLOADERNOTE: THIS WILL ERASE ALL DATA FROM YOUR DEVICE SO MAKE SURE TO TAKE A BACKUP IF NECESSARY
-Extract the SDK Platform tools folder to an easily accessible directory
- Go to Settings > About Tablet > Tap build number 7 times. Go back to main page of Settings > System > Developer
options and enable OEM unlocking and USB Debugging
- Reboot the system to bootloader (Press Vol - and Power key or type "adb reboot bootloader" by opening a command prompt window in Platform tools directory)
- To unlock bootloader type the below code
fastboot flashing unlock
- The device will do a factory reset and restart itself
-After Setting up your device install the magisk app from here
ROOTING [MAGISK]METHOD-1 (FASTBOOT)- Transfer your boot.img to Internal Stroage
- After installing the magisk app Go to Install > Select and Patch a File
- Select the boot.img you transferred to Internal Storage. Magisk will patch your boot.img and display the output folder after the process.
- Transfer the Patched boot.img to SDK Platform tools folder and rename it to boot.img
- Reboot to Bootloader and type the below command:
fastboot flash boot boot.img
-Reboot the device by typing:
fastboot reboot
-Check Magisk manager and the device must be rooted now
METHOD-2 (TWRP)- Install TWRP by following this guide
- Download the magisk apk. Transfer it to SD-Card and flash it from twrp
- Reboot your device
CREDITS@topjohnwu Magisk
@adazem009 For TWRP recovery
Press Thanks button if this guide was useful to you!
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
PATCHED BOOT IMAGE FROM YT-X705FThis is a magisk patched boot.img from the latest firmware for YT-X705F. Please don't use it for other models (YT-X705L, YT-X705X)
TNSMANI said:
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
Click to expand...
Click to collapse
Noted sir. It won't happen again
what version of ROM you use .
the last one is not work with magisk
I use this version YT_X705F_S001135_210909_ROW
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Loserintheend said:
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Click to expand...
Click to collapse
You just have to make sure you use the boot.img from the exact firmware you are on now. Let me know if it worked.
Johannj22 said:
I use this version YT_X705F_S001135_210909_ROW
Click to expand...
Click to collapse
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release OTA-Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install OTA Update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Loserintheend said:
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Click to expand...
Click to collapse
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Johannj22 said:
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Click to expand...
Click to collapse
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Loserintheend said:
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Click to expand...
Click to collapse
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Johannj22 said:
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Click to expand...
Click to collapse
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Loserintheend said:
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Click to expand...
Click to collapse
Waiting?. I am sorry I think its the language barrier ..I don't understand certain things you say.
Any help provided for X705X tab,It got A10 update.How can I get stock rom and boot image for the latest update?
Finally I find out RSA mentioned in this threads and able to download stock firmware
vygavedha said:
Finally I find out RSA mentioned in this threads and able to download stock firmware
Click to expand...
Click to collapse
Yes use RSA and flash the stock firmware. This stock firmware you flashed should be saved in your system's C:\ProgramData\RSA\Rom Files folder. Just get the required image files from there/
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
vygavedha said:
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
Click to expand...
Click to collapse
Send me a screenshot
Johannj22 said:
Send me a screenshot
Click to expand...
Click to collapse
Sure. I have deleted the downloaded file. I will redownload the same and update the screen shot tomorrow
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet