Develop Bugs

TWRP Recovery For Asus Zenfone Lite L1 (ZA551KL)

Presenting the TWRP Recovery for Asus Zenfone Lite L1 (ZA551KL) (asus_x00r)(Treble Supported)(Encryption Fixed) ​Disclaimer : I am not responsible for any bricked device, all responsibility bears the user.​
First Unlock Boot-loader using official asus ubl tool - Download UBL App
Team Win Recovery Project (TWRP) is the most famous custom recovery used by the people who like to flash custom roms, patches, flashable zips etc. The latest version is TWRP 3.2.3-0.
Flash zips through otg or Micro sd Cards as device is encrypted , if you format data and decry-pt then the Flashlight (torch) and the Camera will not Work.ENCRYPTION IS FIXED NOW
Installation By PC
1. Install fastboot tools - minimal adb and fastboot
2. Download twrp image and rename it as "twrp.img", then copy it to the Minimal ADB and Fastboot folder
3. Boot the device to fastboot mode - press and hold power button and volume down button
4. Connect device to pc
5. Open command prompt from Minimal ADB and Fastboot
6. Run command " fastboot flash recovery twrp.img "
7. Twrp will be flashed immediately
8. To boot in to twrp run " fastboot boot twrp.img " or disconnect device from pc and press and hold power button and volume up button
9. Device will be booted to twrp
NOW LETS DECRY-PT DATA
*Download the data Decrypt patch Zip :- Download
*Put it in otg (pendrive) or microsd card
*Then in twrp , Go to wipe section in twrp and tap on Format data (Important )
*Do not wipe data partiton , you have to format it
*then flash the Decrypt zip from your sdcard or pendrive
*after flashing wipe caches
*then reboot , and see camera and flashlight is working and Storage in Decrypted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Join telegram group for updates​
Downloads:-
1. Minimal Fastboot and Adb
2.TWRP_3.2.3.0_asus_lite_l1
3. Decrypt Patch Download
Device tree
Credits:
@Ashish Gupta1999 (me)
Tester - for testing a lot of builds time to time
if you like my work you can donate me also

Dose it support g cam portrait mode

Yes works fantastic(front cam)

Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?

dexx121 said:
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
Click to expand...
Click to collapse
Live l1 and lite l1 is a completely different devices

This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.

AndyYan said:
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
Click to expand...
Click to collapse
there is a specific twrp for live l1

Ashish Gupta1999 said:
there is a specific twrp for live l1
Click to expand...
Click to collapse
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.

AndyYan said:
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
Click to expand...
Click to collapse
Contact me on telegram @yoursenpai1 i will provide you there

it works

Ashish Gupta1999 said:
Contact me on telegram @yoursenpai1 i will provide you there
Click to expand...
Click to collapse
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help

Abhicr said:
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Click to expand...
Click to collapse
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick

Ashish Gupta1999 said:
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Click to expand...
Click to collapse
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.

Abhicr said:
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Click to expand...
Click to collapse
Well there is a fastboot rom available in my telegram channel of lite l1 check in there

Accidentally deleted the OS and now the mobile isn't even switching on. Any solution for this? Anyway I can install an OS ?

My mobile is ASUS Zenfone Lite L1.

BlackView BV9600 Pro + LineageOS?

Hi! Could you please explain if this ROM will be compatible with my smartphone? I'm not sure, I don't found it on the list on LineageOS website.

Well, someone need to compile it for our bv9600 - i also would appreciate it, but i don't have thoose skills...

Also, lenovo vibe c2

i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?

giannhs_n said:
i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?
Click to expand...
Click to collapse
jup, runs root - magisk

AMDFenics said:
jup, runs root - magisk
Click to expand...
Click to collapse
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks

giannhs_n said:
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks
Click to expand...
Click to collapse
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy

AMDFenics said:
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy
Click to expand...
Click to collapse
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

giannhs_n said:
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
View attachment 4705498
Click to expand...
Click to collapse
exact same version.
---------- Post added at 10:29 PM ---------- Previous post was at 10:27 PM ----------
First u need to go to fastboot mode, to unlock "OEM UNLOCK"
This is easy via adb
-> reboot fastboot
Did u install the correct driver? (ADB driver) is ur device listed?

i tried repacking it myself but with no luck so far, also tried various treble GSI, all booting on my BV9600Pro and basically working but mobile data and phone are broken so that's not an option for now

I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?

Root with sp Flash tool
Hi please Anyone could explain this procedure with Sp Flash Tool and post it?

serg2327 said:
I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?
Click to expand...
Click to collapse
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?

AMDFenics said:
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?
Click to expand...
Click to collapse
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.

serg2327 said:
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.
Click to expand...
Click to collapse
I'm glad to hear that it works that way to you. But that doesn't worked for me. So i wrote the way i took, to root. Let the others choose, wich way works for them. :fingers-crossed::good:

I am using another MTK device and SP FlashTool is great it lets you recover from any software brick. So I will advice people to use this method.
I am planning on buying bv9600 pro and having twrp ported and root is a good start to custom roms.
The touch driver issue on twrp should be easily solved with the good kernel module for the twrp. And official twrp support would be nice.
Subscribed to the thread will see where it goes.

hi guys, can you share a clean system twrp backup of bv9600? because my USB is damaged and i can not use sp flash tool to clean restore. thanks!

Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?

dark-wulf said:
Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?
Click to expand...
Click to collapse
Maybe there is a way, but i don't know him. It is a common way for many manufacturer, to say, "here u did something you are not supposed too"

https://www.mediafire.com/file/0j0bx6cb0cb58f5/BV9600Pro_30042019_full.zip/file
Latest Firmware (04.2019) Clean SP Flash tool Backup

adb/twrp issues....

Firstly, when plugging my 7t in to my windows 10 PC, I am asked to choose which mode to go in within usb preferences, as I did previously in order to achieve and ADB driver connection I chose file transfer.......
this didn't work for some reason, only when in MIDI did I get a confirmation with adb devices.....even though there is still no sign of adb interface in device manager.....
any ideas? I can get adb connection with MIDI but is this good enough to flash recoveries/boot images etc....?
I tried to flash twrp and I could successfully boot into twrp directly via fastboot but twrp couldn't seen any of my storage, despite having all security methods turned off...
all i want to do is gain root access but I am having no joy....
ever since android 10 rooting anything for me has been a pain in the ass......truly fed up....it shouldn't be this hard......
I also flashed a patched boot image in an attempt to gain root access but it all did was break my wifi........which i fixed by copying over the latest image and installing locally......
please HELP....

Everything about this issues is already said in this forum.

Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961

ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
sweet, ill check it out.....

ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?

mediaman123 said:
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?
Click to expand...
Click to collapse
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root

Josh McGrath said:
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root
Click to expand...
Click to collapse
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..

mediaman123 said:
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..
Click to expand...
Click to collapse
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

fawazahmed0 said:
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
Click to expand...
Click to collapse
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..

mediaman123 said:
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..
Click to expand...
Click to collapse
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp

fawazahmed0 said:
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp
Click to expand...
Click to collapse
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....

mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access

fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?

mediaman123 said:
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?
Click to expand...
Click to collapse
it wipe's the data

mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
TWRP is not functional at the moment, so stay away from it.
The only way to root right now is to use the patch boot image method.

Lossyx said:
No don't do this.... This is not about encryption at all. It's about the major partitioning changes that has happened in Android 10. Wiping the system will just make everything worse.
Avoid using TWRP at all.
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Oh, I didn't know this phone was on Android 10, Thanks for letting me know.
TWRP doesn't support Android 10 yet.
You can see it here
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html
Actually there is a twrp compiled for this phone, but that doesn't work , you can see the messages in thread:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
The steps I told, was for Android 9 and earlier devices, I assumed, this is an old device.
@mediaman123, So please wait, until twrp starts supporting the Android 10.
And for rooting, I am not sure, whether magisk supports this new phone or not.
Maybe @Lossyx can help you on that.

https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...

mediaman123 said:
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...
Click to expand...
Click to collapse
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
So if it boots an older image successfully I can move it over to the phone to patch to then flash it or use the already patched one and flash that...?..

BlackShark3S ROM or Recovery do you have? [Resolved!]

I know it's out of place, but I'm posting here because it's not registered this device with XDA. Forgive me.
I have a BlackShark 3S, but I can't update it because it broke Recovery.:crying:
Therefore, BlackShark 3S Full OTA or Recovery dump is required.
If you have it, would you please share it?
Thank you for reading.

Try the following:
1. Unlock bootloader (if not already) https://forum.xda-developers.com/t/blackshark-3-3-pro-3s-unlock-bootloader-files.4141537/
2. Download https://pan.ydxby.com/刷机包/黑鲨3/KLEN2009280CN00MQ3.zip?preview
3. Get Fastboot https://developer.android.com/studio/releases/platform-tools
4. Flash my fixed (updated with new bs3 and 3s kernel) TWRP from the attachment (fastboot flash recovery_a *Link to the downloaded TWRP image* and fastboot flash recovery_b *Link to the downloaded TWRP image*)
5. Boot to recovery (fastboot reboot recovery/fastboot boot *Link to the downloaded TWRP image*)
6. (recommended, not necessary) wipe all partitions in TWRP/Factory data reset/format as F2FS (updated it)
7. plug Phone to computer, copy the KLEN2009280CN00MQ3.zip from 2. to internal storage
8. install the zip in TWRP
9. (optional) after install, reboot to fastboot and flash TWRP again (if you don't do that you will have stock recovery)
10. boot the system
Other option:
instead of 2. Find the exact rom you have on your device https://pan.ydxby.com/刷机包/黑鲨3/
4. Extract the payload https://forum.xda-developers.com/t/guide-payload-bin-install-ota-zip-without-twrp.3865319/
5. install the recovery by fastboot flash recovery_a *Link to recovery.img* and fastboot flash recovery_b recovery.img
11. Tell me if sth worked for you so the next one with this problem sees
12. never buy a phone from someone who does not provide official stock ROM downloads/bootloader unlock again.

Sorry xda was not allowing me to upload for whatever invisible reasons. it seems to have worked after 200 attempts but 7z is not allowed (its smaller xda!) so i renamed to .zip. Just rename it back to KLEN2009280CN00MQ3TWRP_3.4.2B_repack.7z and extract it....

Hi @wertus33333
I saw it now.
I'll try it now.
12. never buy a phone from someone who does not provide official stock ROM downloads/bootloader unlock again.
Click to expand...
Click to collapse
That's really true.They also don't provide source code of linux kernel. (You are also mentioned here. https://forum.xda-developers.com/t/...l-and-up-to-date-china-rom-downloads.4197717/)
I was saved because you were there. Thank you.

koumaza said:
...
I was saved because you were there. Thank you.
Click to expand...
Click to collapse
Happy to help. So it worked out?

wertus33333 said:
Try the following:
1. Unlock bootloader (if not already) https://forum.xda-developers.com/t/blackshark-3-3-pro-3s-unlock-bootloader-files.4141537/
2. Download https://pan.ydxby.com/刷机包/黑鲨3/KLEN2009280CN00MQ3.zip?preview
3. Get Fastboot https://developer.android.com/studio/releases/platform-tools
4. Flash my fixed (updated with new bs3 and 3s kernel) TWRP from the attachment (fastboot flash recovery_a *Link to the downloaded TWRP image* and fastboot flash recovery_b *Link to the downloaded TWRP image*)
5. Boot to recovery (fastboot reboot recovery/fastboot boot *Link to the downloaded TWRP image*)
6. (recommended, not necessary) wipe all partitions in TWRP/Factory data reset/format as F2FS (updated it)
7. plug Phone to computer, copy the KLEN2009280CN00MQ3.zip from 2. to internal storage
8. install the zip in TWRP
9. (optional) after install, reboot to fastboot and flash TWRP again (if you don't do that you will have stock recovery)
10. boot the system
Other option:
instead of 2. Find the exact rom you have on your device https://pan.ydxby.com/刷机包/黑鲨3/
4. Extract the payload https://forum.xda-developers.com/t/guide-payload-bin-install-ota-zip-without-twrp.3865319/
5. install the recovery by fastboot flash recovery_a *Link to recovery.img* and fastboot flash recovery_b recovery.img
11. Tell me if sth worked for you so the next one with this problem sees
12. never buy a phone from someone who does not provide official stock ROM downloads/bootloader unlock again.
Click to expand...
Click to collapse
Thanks a lot! Working perfect!
Some comments what I found:
- After flashing ROM, safety net fails, all points
- Rooting without any problem
- Magisk Hide working well for that apps wich doesn't work if detect root
- Smali Patch not working for spoofing in PoGo
- I used this method because after unlock mi BS3S couldn't even once, login into google account, now can login anytime
Still have to find the way to make smali patch works, but at now looks fine
Thanks again

LuigiHacks said:
Thanks a lot! Working perfect!
Some comments what I found:
- After flashing ROM, safety net fails, all points
- Rooting without any problem
- Magisk Hide working well for that apps wich doesn't work if detect root
- Smali Patch not working for spoofing in PoGo
- I used this method because after unlock mi BS3S couldn't even once, login into google account, now can login anytime
Still have to find the way to make smali patch works, but at now looks fine
Thanks again
Click to expand...
Click to collapse
Happy to have helped,
-Maybe safety net fails bcs its CN beta rom
-If you only need location spoof you could try enabling dev options and selecting a mock location app from aurora-/playstore/F-droid no idea if it works with PoGo tho
to further optimize the ROM you could disable some of the bloatware with a magisk system app disabler.
would also be quite interesting if GSI's work (so we would have multilanguage support on nice interfaces with newest CN firmware...) but i filled that 256GB and backups take ages without USB3.0 xD

wertus33333 said:
Happy to have helped,
-Maybe safety net fails bcs its CN beta rom
-If you only need location spoof you could try enabling dev options and selecting a mock location app from aurora-/playstore/F-droid no idea if it works with PoGo tho
to further optimize the ROM you could disable some of the bloatware with a magisk system app disabler.
would also be quite interesting if GSI's work (so we would have multilanguage support on nice interfaces with newest CN firmware...) but i filled that 256GB and backups take ages without USB3.0 xD
Click to expand...
Click to collapse
Hello my friend, you deserved a cold beer
I flashed back KLEN2009280CN00MQ3, flash noverity zip, root magisk, smali patcher + spoofing signature, full Google apps and now everything works perfect, sing in all my accounts, magisk by passing safety net and spoofing PoGo without issues. Really thanks for your help.
One last question, do you know how to lock apps working in background and holding his reference in the notification bar? (Even when you release memory closing apps) it's for the joystick that am using.
Regards

LuigiHacks said:
Hello my friend, you deserved a cold beer
I flashed back KLEN2009280CN00MQ3, flash noverity zip, root magisk, smali patcher + spoofing signature, full Google apps and now everything works perfect, sing in all my accounts, magisk by passing safety net and spoofing PoGo without issues. Really thanks for your help.
One last question, do you know how to lock apps working in background and holding his reference in the notification bar? (Even when you release memory closing apps) it's for the joystick that am using.
Regards
Click to expand...
Click to collapse
nice.
so you want the app to stay active in background? remove it from battery optimizations (not sure if cleaning recents will still clean it but the system won't stop it)
also check the app permissions of the apps you want to keep in notification bar maybe there is an option somewhere

safety net passed in beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

And I recommend litegapps
LiteGapps
Download LiteGapps for free. LiteGapps is a custom gapps which is ,small, friendly and complete. LiteGapps is an Custom Gapps for smartphones, tablet, desktop, free and open-source software. by providing complete, stable support and several additional features.
sourceforge.net
It works systemless xD

koumaza said:
And I recommend litegapps
LiteGapps
Download LiteGapps for free. LiteGapps is a custom gapps which is ,small, friendly and complete. LiteGapps is an Custom Gapps for smartphones, tablet, desktop, free and open-source software. by providing complete, stable support and several additional features.
sourceforge.net
It works systemless xD
Click to expand...
Click to collapse
i recommend no gapps most apps "requiring" play services work perfectly without (they are telling different stories tho xD) and there is aurorastore

I've seen it, it's awesome!
Unfortunately, I need a Google Play license, so I'll use both.
And I just tried it, and the app is amazingly complete!
I will now use the aurora store to manage my apps.

Thanks for the post. Just got my BS 3S, i would like to root it and debloat most of the apps. Also is there any way to change the launcher? I tried in the settings, default apps, it says cant set because the launcher that Im trying to use is not allowed my JOYUI, Im trying Nova and Lawnchair 2. Thanks

I tried in the settings, default apps, it says cant set because the launcher that Im trying to use is not allowed my JOYUI, Im trying Nova and Lawnchair 2
Click to expand...
Click to collapse
Try installing and using quickswitch with magisk.
Then you can change the SystemUI native launcher.
Also, CustoMIUIzer is an interesting app so please try it.

koumaza said:
Try installing and using quickswitch with magisk.
Then you can change the SystemUI native launcher.
Also, CustoMIUIzer is an interesting app so please try it.
Click to expand...
Click to collapse
My BS 3S is not yet rooted, can you guide me?

hello can update
Download https://pan.ydxby.com/刷机包/黑鲨3/KLEN2009280CN00MQ3.zip?preview ??
Can't download now

iampatricktan said:
My BS 3S is not yet rooted, can you guide me?
Click to expand...
Click to collapse
I write the method I performed.
First, one thing to keep in mind is that the BlackShark 3 and 3S are partially compatible.
1. Unlock Bootloader.
Follow This Thread.
BlackShark 3/3 Pro/3S unlock bootloader files.
This unlocking method was researched by myself, so I bought two machines to study it. I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it. They charge high unlock fees to unlock for users in need. This is...
forum.xda-developers.com
2. Flash Magisk from TWRP
TWRP-LINK: https://mega.nz/folder/KU8DTZhR#M2YjCHUrmupBkovTam2HtQ
If you don't know what to do for, please ask me.

How to root and install custom recovery on Micromax IN 1 E6746

I have already unlocked the bootloader on my Micromax IN 1 E6746 and other than that it's untouched. How can I root my device and install custom recovery on it?
I have attached some screenshots from Treble check and Droid info app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

shah.meet6338 said:
I have already unlocked the bootloader on my Micromax IN 1 E6746 and other than that it's untouched. How can I root my device and install custom recovery on it?
I have attached some screenshots from Treble check and Droid info app.View attachment 5301995View attachment 5301997View attachment 5301999
Click to expand...
Click to collapse
For Magisk: Download the APK of the manager off of the official Github, and rip the boot.img from your ROM. Then: Use Magisk Manager to patch that boot image, and flash it to your boot using ADB commands while in fastboot mode.
For Recovery: I'm not sure. I do not own the device, and most devices have you do different things for flashing the recovery. Sorry that I can't help you in this regard.

OrthodoxOxygen said:
For Magisk: Download the APK of the manager off of the official Github, and rip the boot.img from your ROM. Then: Use Magisk Manager to patch that boot image, and flash it to your boot using ADB commands while in fastboot mode.
For Recovery: I'm not sure. I do not own the device, and most devices have you do different things for flashing the recovery. Sorry that I can't help you in this regard.
Click to expand...
Click to collapse
Any ideas on how to get the boot.img. This model is fairly new and hasn't been even 2 months since it was first released.

shah.meet6338 said:
Any ideas on how to get the boot.img. This model is fairly new and hasn't been even 2 months since it was first released.
Click to expand...
Click to collapse
You need to find a copy of the current stock ROM you are using. Then (since it will likely be in a .zip file): Extract it, and move it onto your device. Let Magisk do its job with the file, and then move the patched image onto your PC from your phone. Afterwards: Use ADB's "platform-tools" to flash the boot partition of your phone with the patched boot.img. You can find videos on how to do this, but the command should look like "fastboot flash boot x.img" - where x = the name of the file.

OrthodoxOxygen said:
You need to find a copy of the current stock ROM you are using. Then (since it will likely be in a .zip file): Extract it, and move it onto your device. Let Magisk do its job with the file, and then move the patched image onto your PC from your phone. Afterwards: Use ADB's "platform-tools" to flash the boot partition of your phone with the patched boot.img. You can find videos on how to do this, but the command should look like "fastboot flash boot x.img" - where x = the name of the file.
Click to expand...
Click to collapse
Found the recovery for my device.
Here is the link:
Thread '[RECOVERY][BETA][v3.0.0] Pitch Black Recovery [E7746][30/01/2021]' https://forum.xda-developers.com/t/...itch-black-recovery-e7746-30-01-2021.4210395/
The recovery works on Micromax in note 1 and Micromax in 1 ( as far as i know).

shah.meet6338 said:
Found the recovery for my device.
Here is the link:
Thread '[RECOVERY][BETA][v3.0.0] Pitch Black Recovery [E7746][30/01/2021]' https://forum.xda-developers.com/t/...itch-black-recovery-e7746-30-01-2021.4210395/
The recovery works on Micromax in note 1 and Micromax in 1 ( as far as i know).
Click to expand...
Click to collapse
Nice. You might need to flash a custom ROM to root your phone, as there doesn't seem to be any stock ROMs on the internet. You could maybe rip the stock ROM from your phone, but I'm not sure how to do that, nor how safe it is. If you use the custom ROM method instead: Just flash the ROM to your phone, then extract the .zip file of that ROM on your PC. Put the boot.img file on your phone, use the Magisk Patcher in the Magisk app, move the patched image to your computer, enter fastboot, and then flash your boot partition with it. Watch out, though. Depending on your phone: You may have A/B partitioning, which makes things a little harder for all flashing processes. I haven't had a phone with A/B partitioning for a while, so, I can't really help you there. But, I'm sure there are videos about it. The main process should still prove usefull regardless of which device you are using.
EDIT: You have an A-only system. Flashing the phone should be pretty easy.

OrthodoxOxygen said:
Nice. You might need to flash a custom ROM to root your phone, as there doesn't seem to be any stock ROMs on the internet. You could maybe rip the stock ROM from your phone, but I'm not sure how to do that, nor how safe it is. If you use the custom ROM method instead: Just flash the ROM to your phone, then extract the .zip file of that ROM on your PC. Put the boot.img file on your phone, use the Magisk Patcher in the Magisk app, move the patched image to your computer, enter fastboot, and then flash your boot partition with it. Watch out, though. Depending on your phone: You may have A/B partitioning, which makes things a little harder for all flashing processes. I haven't had a phone with A/B partitioning for a while, so, I can't really help you there. But, I'm sure there are videos about it. The main process should still prove usefull regardless of which device you are using.
EDIT: You have an A-only system. Flashing the phone should be pretty easy.
Click to expand...
Click to collapse
Flashed magisk zip through the custom recovery (PBRP) amd installed magisk manager app afterwards. Now i have a rooted phone with a custom recovery and stock rom.
If you have any suggestions for a good custom rom, please let me know.

shah.meet6338 said:
Flashed magisk zip through the custom recovery (PBRP) amd installed magisk manager app afterwards. Now i have a rooted phone with a custom recovery and stock rom.
If you have any suggestions for a good custom rom, please let me know.
Click to expand...
Click to collapse
I think that might be an out-dated version of Magisk. Some modules might not work. The newest update makesy ou install the app first. I think the latest is 22.1. As for a good ROM: Your phone supports project treble, which means that you can flash a GSI image if there isn't enough development for your device right now. I heard HavocOS is good. I'm personally a fan of crDroid, Pixel Experience, and Evolution X. LineageOS is also quite good. You can find treble ROMs here: https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/
Make sure to pick the appropriate GSI. If you don't already know: Flashing the wrong one can hard-brick your phone. You should download GSIs tailored around a-only arm64 architectures, because that's what your phone is built on. Happy flashing!

OrthodoxOxygen said:
I think that might be an out-dated version of Magisk. Some modules might not work. The newest update makesy ou install the app first. I think the latest is 22.1. As for a good ROM: Your phone supports project treble, which means that you can flash a GSI image if there isn't enough development for your device right now. I heard HavocOS is good. I'm personally a fan of crDroid, Pixel Experience, and Evolution X. LineageOS is also quite good. You can find treble ROMs here: https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/
Make sure to pick the appropriate GSI. If you don't already know: Flashing the wrong one can hard-brick your phone. You should download GSIs tailored around a-only arm64 architectures, because that's what your phone is built on. Happy flashing!
Click to expand...
Click to collapse
does pixel experience rom work for any treble device? If so, can you point me in the direction where i can find pixel experience rom .

shah.meet6338 said:
does pixel experience rom work for any treble device? If so, can you point me in the direction where i can find pixel experience rom .
Click to expand...
Click to collapse
1) It doesn't always work. While I'm not quite sure as to why, sometimes ROMs just won't work on some devices. That's not to say that other GSIs don't, though. The fun of flashing is finding out what works best for you.
2) https://forum.xda-developers.com/t/gsi-unofficial-11-pixel-experience-pixel-experience-plus.4269051/

OrthodoxOxygen said:
1) It doesn't always work. While I'm not quite sure as to why, sometimes ROMs just won't work on some devices. That's not to say that other GSIs don't, though. The fun of flashing is finding out what works best for you.
2) https://forum.xda-developers.com/t/gsi-unofficial-11-pixel-experience-pixel-experience-plus.4269051/
Click to expand...
Click to collapse
I tried the pixel experience plus from your link but when i select the .img file to flash, the recovery (PBRP) asks me to select a partition to flash from a list - nvram, uboot, boot, recovery, logo, tee1,tee2, super(product, vendor, system)
I am not sure which partition should i select here.

shah.meet6338 said:
I tried the pixel experience plus from your link but when i select the .img file to flash, the recovery (PBRP) asks me to select a partition to flash from a list - nvram, uboot, boot, recovery, logo, tee1,tee2, super(product, vendor, system)
I am not sure which partition should i select here.
Click to expand...
Click to collapse
You need to flash it to your system partition. Did you make sure to grab the correct GSI according to your architecture and partition(s)?

OrthodoxOxygen said:
You need to flash it to your system partition. Did you make sure to grab the correct GSI according to your architecture and partition(s)?
Click to expand...
Click to collapse
yes, i got the arm64 a only image. i don't see system partition mentioned separately on the list of partitions.
super(product,vendor,system) is one option. nvram is another option . uboot is another option and so on.
should i select super partition?

shah.meet6338 said:
yes, i got the arm64 a only image. i don't see system partition mentioned separately on the list of partitions.
super(product,vendor,system) is one option. nvram is another option . uboot is another option and so on.
should i select super partition?
Click to expand...
Click to collapse
Can you boot into fastboot mode? I believe you're meant to flash GSIs only to the system partition.
Follow this procedure:
1) Boot into recovery.
2) Click on "Wipe", go to the advanced section, and then select Dalvik/Art cache, Substratum Overlays, Magisk Modules, Cache, Data, System, and (If you want) Internal storage. Wipe them.
3) Boot into fastboot mode.
4) Open the "platform-tools" folder, and drop the GSI image inside. Then, open a console so you can use ADB. Enter "fastboot devices".
5) If your device is connected, enter: "fastboot flash system x.img" - "x" being the name of your image.
6) Hope that it works.

OrthodoxOxygen said:
Can you boot into fastboot mode? I believe you're meant to flash GSIs only to the system partition.
Follow this procedure:
1) Boot into recovery.
2) Click on "Wipe", go to the advanced section, and then select Dalvik/Art cache, Substratum Overlays, Magisk Modules, Cache, Data, System, and (If you want) Internal storage. Wipe them.
3) Boot into fastboot mode.
4) Open the "platform-tools" folder, and drop the GSI image inside. Then, open a console so you can use ADB. Enter "fastboot devices".
5) If your device is connected, enter: "fastboot flash system x.img" - "x" being the name of your image.
6) Hope that it works.
Click to expand...
Click to collapse
FAILED (remote: This partition doesn't exist)
i think it has something to do with the dynamic partitions. any ideas?

shah.meet6338 said:
FAILED (remote: This partition doesn't exist)
i think it has something to do with the dynamic partitions. any ideas?
Click to expand...
Click to collapse
How to Fix GSI System failed (remote partition table doesn't exist) fastboot
step by step guide to fix failed remote partition table doesn't exist, Most of the user face this issue during the Installation of GSI Firmware on dynamic
romprovider.com
Try this, maybe. I've heard about this tool on XDA, I believe.

OrthodoxOxygen said:
How to Fix GSI System failed (remote partition table doesn't exist) fastboot
step by step guide to fix failed remote partition table doesn't exist, Most of the user face this issue during the Installation of GSI Firmware on dynamic
romprovider.com
Try this, maybe. I've heard about this tool on XDA, I believe.
Click to expand...
Click to collapse
Here, too.
fastboot flash system: partition not found
Hi All, used my OP7T for a week before deciding to unlock. That went fine, but when I tried to flash a GSI (no custom ROMs available yet), it says partition not found?? Tried system and system_a. [email protected]:~/Downloads/Android$ fastboot flash...
forum.xda-developers.com

shah.meet6338 said:
I have already unlocked the bootloader on my Micromax IN 1 E6746 and other than that it's untouched. How can I root my device and install custom recovery on it?
I have attached some screenshots from Treble check and Droid info app.View attachment 5301995View attachment 5301997View attachment 5301999
Click to expand...
Click to collapse
Join this Telegram group for development of this device,
Telegram: Contact @MmxIn1_Official
t.me

shah.meet6338 said:
I have already unlocked the bootloader on my Micromax IN 1 E6746 and other than that it's untouched. How can I root my device and install custom recovery on it?
I have attached some screenshots from Treble check and Droid info app.View attachment 5301995View attachment 5301997View attachment 5301999
Click to expand...
Click to collapse
bro when gong to active on telegram,
we need testers like you to test custom roms and make our IN 1 Community better