Samsung Galaxy A5 (2017) suddenly reboots - Samsung Galaxy A3, A5, A7 (2017) Questions & Answe

Hello everyone,
I successfully installed lineage-14.1 and twrp-3.1.1-0-a5y17lte 3 on my new Samsung Galaxy A5 (2017) a couple of weeks ago. First everything was fine, but recently it started to reboot sporadically and often hung in a boot loop. Once it gave strange sounds through the loud speakers when i pressed a button or other strange things (at that time logcat showed a lot of debug messages related to audio). I tried to remove most of the apps I had installed, removed the sdcard, the SIM, wiped normal cache and dalvik cache and reflashed it with 3 different nightly builds of LineageOs. Nothing helped. Often I had to interrupt the boot loop by pressing the <power>+<volume down> keys. Whenever I was able to enter TRWP recovery and reboot it seemed to be fine for some time but the same procedure started again after an hour or so.
Since this problem at the very beginning of the boot process a small red text is shown just before the boot logo - the problem is that it is so fast that I cannot read the (error?) message.
Does anybody know a way how to find out what this boot message could be ?
I have backed up the boot log (dmesg.log) and there some warnings with a call trace are shown.
It says something like "Attribute error_cnt: write permission without 'store'". Does anybody got a clue what that could mean and how I can solve the problem ?
There are also some minor error messages in the log that I did not consider so important - but I am really a newbie in that kind of devices and cant really judge it.
If somebody is interested I can provide the dmesg.log, recovery.log and a bugreport.zip of my device.
Here is are some of the error messages I found in the dmesg.log:
<4>[ 1.046739] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.046764] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.046780] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.046795] [0: swapper/0: 1] Modules linked in:
<4>[ 1.046813] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.14-g3d77bc46b82 #1
<4>[ 1.046828] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.046844] [0: swapper/0: 1] Call trace:
<4>[ 1.046865] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.046884] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.046904] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.046924] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.046944] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.046961] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.046978] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.046997] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047017] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047035] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047052] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047070] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047087] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047104] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.047121] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.047139] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.047157] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.047175] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.047194] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.047212] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.047241] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741e ]---
<6>[ 1.047442] [0: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 455, base_baud = 0) is a S3C6400/10
<4>[ 1.047640] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.047661] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.047676] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.047690] [0: swapper/0: 1] Modules linked in:
<4>[ 1.047708] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.14-g3d77bc46b82 #1
<4>[ 1.047722] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.047736] [0: swapper/0: 1] Call trace:
<4>[ 1.047755] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.047773] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.047792] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.047810] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.047829] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.047846] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.047862] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.047881] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047901] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047918] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047935] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047952] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047969] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047986] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.048003] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.048020] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.048039] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.048056] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.048075] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.048091] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.048106] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741f ]---
<4>[ 1.048985] [0: swapper/0: 1] [ExyRNG] passed the start-up test
<4>[ 1.050183] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.050207] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/include/linux/kref.h:47 set_current_rng+0x60/0x7c()
<4>[ 1.050222] [0: swapper/0: 1] Modules linked in:
<4>[ 1.050239] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.14-g3d77bc46b82 #1
<4>[ 1.050254] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.050268] [0: swapper/0: 1] Call trace:
<4>[ 1.050287] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.050304] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.050323] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.050341] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.050360] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.050377] [0: swapper/0: 1] [<ffffffc00001beac>] warn_slowpath_null+0x14/0x20
<4>[ 1.050395] [0: swapper/0: 1] [<ffffffc00032aee4>] set_current_rng+0x5c/0x7c
<4>[ 1.050412] [0: swapper/0: 1] [<ffffffc00032b498>] hwrng_register+0x1c0/0x23c
<4>[ 1.050430] [0: swapper/0: 1] [<ffffffc00032ba04>] exyswd_rng_probe+0x48/0x70
<4>[ 1.050448] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.050466] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.050483] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.050500] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.050517] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.050534] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.050551] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.050569] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.050586] [0: swapper/0: 1] [<ffffffc000cedd08>] exyswd_rng_init+0x34/0x70
<4>[ 1.050604] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.050623] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.050640] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.050654] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af7420 ]---
<6>[ 1.050813] [0: swapper/0: 1] ExyRNG: hwrng registered
<6>[ 1.050866] [0: swapper/0: 1] ExyRNG driver, (c) 2014 Samsung Electronics
<4>[ 1.046739] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.046764] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.046780] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.046795] [0: swapper/0: 1] Modules linked in:
<4>[ 1.046813] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.14-g3d77bc46b82 #1
<4>[ 1.046828] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.046844] [0: swapper/0: 1] Call trace:
<4>[ 1.046865] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.046884] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.046904] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.046924] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.046944] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.046961] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.046978] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.046997] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047017] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047035] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047052] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047070] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047087] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047104] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.047121] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.047139] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.047157] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.047175] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.047194] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.047212] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.047241] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741e ]---
<6>[ 1.047442] [0: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 455, base_baud = 0) is a S3C6400/10
<4>[ 1.047640] [0: swapper/0: 1] ------------[ cut here ]------------

@quirxi, are you using a ram swapper? I don't know much about logs so i'm probably wrong.
Code:
<4>[ 1.047676] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
It looks like to me a file has the wrong permissions.
Sent from my Samsung SM-A520W using XDA Labs

@iloveoreos
no - I dont use a ram swapper as far as I know. Not sure what this is really . For me it also looks like it has wrong permissions - I just wonder why ? Only used the standard procedure for installing lineageos and TWRP.
Now I restored the backup from the original image with TWRP and the strange thing is that the error occured again. So I reckon that its not the fault of lineageos or some software installed on it but the fault of either TWRP or a hardware problem. That is the only thing that is left after I changed anything else. Today I reflashed the stock rom with odin and till now the problem did not occur again. If it is going to happen again I reckon that it is a hardware problem else I my best guess is TWRP failure.

Would it work to change permissions manually?
Sent from my Samsung SM-A520W using XDA Labs

iloveoreos said:
Would it work to change permissions manually?
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
I dont really know how to do that. I wonder why a system app at boot time has problems with permissions since it should be running with the highest permissions anyway as far as I know ?

quirxi said:
I dont really know how to do that. I wonder why a system app at boot time has problems with permissions since it should be running with the highest permissions anyway as far as I know ?
Click to expand...
Click to collapse
Every file has certain permissions. You can change them with a root browser.(if you are rooted) You can also do it with twrp IF you know the commands good enough. (I do NOT)
Sent from my Samsung SM-A520W using XDA Labs

iloveoreos said:
Every file has certain permissions. You can change them with a root browser.(if you are rooted) You can also do it with twrp IF you know the commands good enough. (I do NOT)
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
Not sure, but i guess that are normal unix/linux permissions that the files usually have, or am I mistaken ? That would be easy to change - just wonder why they are wrong ??

quirxi said:
Not sure, but i guess that are normal unix/linux permissions that the files usually have, or am I mistaken ? That would be easy to change - just wonder why they are wrong ??
Click to expand...
Click to collapse
I couldn't have one idea why, lol. You said you tried flashing a few times?
Sent from my Samsung SM-A520W using XDA Labs

Disable any modification related to entropy/random (magisk modules, initd, apps, etc).
Those permissions are sysfs attributes that can't be changed without compiling. I could be wrong!
Probably less relevant:
Try disabling CPU hotplugging and using only 1 clock for testing: /sys/devices/system/cpu/*
Selinux (and its audit logs)
Linux permissions chmod and chown.
Linux 'permissions' chattr.
Samsung uses vnswap by default to compress ram, probably not relevant.

I'm porting KVM for Samsung Galaxy S8 and got the same kernel panic like this. The kernel traceback suggest that `s3c24xx_serial_probe` might be the problem. Any ideas?

Related

Samsung Galaxy GT-I5510 Callisto | Firmware Releases ,Custom Roms , Rooting

Here is general talk.
How to use odin:
Install kies and reboot
Plug-in phone via usb cable
Kill all kies process
Launch Odin
Click ops box and select Callisto.ops
How to root official gingerbread:
http://www.megaupload.com/?d=52Y28SPP
You need kies, odin and callisto.ops.
1. Follow odin use instruction [Steps from 2-5]
2. Select PDA and chose patch.
3. Flash
4. Extract and run Superoneclickroot. If superoneclick looks is dead/hang, launch another session with gingerbreak, but don`t close first.
I recommend installing busybox.
If you have problems with wifi after rooting try flash this file:
http://www.multiupload.com/PPY0X7VCH8
physical keyboard azerty not working with gingerbread
hi, WillingMagic. do you have any idea how to fix the physical keyboard to work with the "I5510XWKP5_I5510NEEKP1_I5510XXKPF_HOME.tar.md5" firmware?
before this, copying the original folders "keylayout" and "keychars" into "system/usr" used to work, but it won't work anymore...
thanks in advance.
behemot24 said:
hi, WillingMagic. do you have any idea how to fix the physical keyboard to work with the "I5510XWKP5_I5510NEEKP1_I5510XXKPF_HOME.tar.md5" firmware?
before this, copying the original folders "keylayout" and "keychars" into "system/usr" used to work, but it won't work anymore...
thanks in advance.
Click to expand...
Click to collapse
don't copy all.. just rename your former callisto_kepad3.kcm.bin to sec_keypad.kcm.bin and paste it to /keychar folder. don't forget to set permission & reboot your device. it works for me
didhiy said:
don't copy all.. just rename your former callisto_kepad3.kcm.bin to sec_keypad.kcm.bin and paste it to /keychar folder. don't forget to set permission & reboot your device. it works for me
Click to expand...
Click to collapse
Not working for me.
I've replace the file with my froyo backup and nothing have change...
I'm running with azerty keyboard, Arkas 1.2 – Ganymede 3 custom rom
Scylla.bx said:
Not working for me.
I've replace the file with my froyo backup and nothing have change...
I'm running with azerty keyboard, Arkas 1.2 – Ganymede 3 custom rom
Click to expand...
Click to collapse
well, actually I use qwerty not azerty.. I found this one file enough to fix some weird character on mine
if you have former froyo files, maybe you can try to copying all file to /keychar & /keylayout with renaming the callisto_ file with sec_
in my case the froyo qwerty.kl will make the alt function act like second alpha keyboard layout. maybe your azerty.kl will different
Display driver in official gingerbread seems to be broken like mentioned in old thread - after having the phone sit idle for a yet undetermined time, the display would get all scrambled and colors get messed up.
Does android put the display driver in some kind of "deep sleep" after a while? Looks like you will get no issues if you wake the phone within a shorter period of time.
I'll see whether or not the display messes up if I disable display sleep under developer menu.
EDIT: makes me wonder whether it's possible to reset frame buffer device without having to reboot the phone. Any guidelines?
Here's what I figured:
1) Takes a few minutes of display sleep to mess up the hardware
2) Every other wake results in normal screen (let display sleep, wait a while, wake the phone, get garbled screen, let display sleep, wait a while, wake the phone with normal screen. the cycle repeats)
Relevant kmsg below (I removed Battery and WHITELIST events)
Phone sleeping, waking it up results in garbled screen, not unlocking, letting it go back to sleep again:
<4>[ 1261.684013] ta8566 lcdc_ta8566_set_backlight:85,23
<4>[ 1261.684626] ta8566 lcdc_ta8566_set_backlight:102,26
<4>[ 1261.685248] ta8566 lcdc_ta8566_set_backlight:119,30
<4>[ 1261.685861] ta8566 lcdc_ta8566_set_backlight:136,33
<4>[ 1261.686484] ta8566 lcdc_ta8566_set_backlight:153,38
<4>[ 1261.687088] ta8566 lcdc_ta8566_set_backlight:170,42
<4>[ 1261.687699] ta8566 lcdc_ta8566_set_backlight:187,46
<4>[ 1261.688313] ta8566 lcdc_ta8566_set_backlight:204,49
<4>[ 1261.688934] ta8566 lcdc_ta8566_set_backlight:221,53
<4>[ 1261.689548] ta8566 lcdc_ta8566_set_backlight:238,57
<4>[ 1261.690161] ta8566 lcdc_ta8566_set_backlight:255,61
<4>[ 1261.694579] [TSP] Error code : 3509
<4>[ 1261.694623] [TSP] touch_hw_rst! : 3776
<4>[ 1261.694681] [TSP] Dump state, last rst=5
<4>[ 1261.694701] #1=0,#2=0,#3=0,#4=0,#5=17,#6=0,#7=0,#8=0,#9=0,#10=0
<4>[ 1261.842578] [TSP] build = 0xaa
<4>[ 1261.842621]
<4>[ 1261.842634] [TSP][ERROR] line : 4915
<4>[ 1261.902803] [TSP] reset acq atchcalst=0, atchcalsthr=0
<4>[ 1262.084296] [TSP] TA NON-Detect!!!
<4>[ 1262.086909] [TSP] Dump state, last rst=5
<4>[ 1262.086929] #1=0,#2=0,#3=0,#4=0,#5=17,#6=0,#7=0,#8=0,#9=0,#10=0
<4>[ 1262.088978] [TSP] Calibrating : msg[0] = 1, msg[1] = 144
<4>[ 1262.094906] [TSP] Dump state, msg[0]=0x4, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.096876] [TSP] Dump state, msg[0]=0x5, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.098843] [TSP] Dump state, msg[0]=0x6, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.100809] [TSP] Dump state, msg[0]=0x7, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.106293] [TSP] Dump state, msg[0]=0x8, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.108324] [TSP] Dump state, msg[0]=0x9, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.110316] [TSP] Palm Touch! - 0 released, Ver. 21
<4>[ 1262.113866] [TSP] Dump state, msg[0]=0xD, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.115433] [TSP] Dump state, msg[0]=0x14, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1262.116983] [TSP] msg[0] = 1, msg[1] = 0
<4>[ 1262.118509] [TSP] Dump state, msg[0]=0xFF, [1]=0x0, [2]=0x7A, [3]=0x50, [4]=0x3C, [5]=0x0
<4>[ 1266.275096] [KeyLED] msm_keypad_bl_led_set: value=0
<4>[ 1266.276404] ta8566 lcdc_ta8566_set_backlight:238,57
<4>[ 1266.293111] ta8566 lcdc_ta8566_set_backlight:221,53
<4>[ 1266.309678] ta8566 lcdc_ta8566_set_backlight:204,49
<4>[ 1266.325238] ta8566 lcdc_ta8566_set_backlight:187,46
<4>[ 1266.341869] ta8566 lcdc_ta8566_set_backlight:170,42
<4>[ 1266.357398] ta8566 lcdc_ta8566_set_backlight:153,38
<4>[ 1266.373939] ta8566 lcdc_ta8566_set_backlight:136,33
<4>[ 1266.390466] ta8566 lcdc_ta8566_set_backlight:119,30
<4>[ 1266.407004] ta8566 lcdc_ta8566_set_backlight:102,26
<4>[ 1266.423536] ta8566 lcdc_ta8566_set_backlight:85,23
<4>[ 1266.439061] ta8566 lcdc_ta8566_set_backlight:68,19
<4>[ 1266.455649] ta8566 lcdc_ta8566_set_backlight:51,16
<4>[ 1266.471184] ta8566 lcdc_ta8566_set_backlight:34,12
<4>[ 1266.487841] ta8566 lcdc_ta8566_set_backlight:17,7
<6>[ 1266.503714] request_suspend_state: sleep (0->3) at 1266512241179 (2011-09-27 10:18:54.775473332 UTC)
<4>[ 1266.504868] ta8566 lcdc_ta8566_set_backlight:0,0
<6>[ 1266.507923] msm_batt_early_suspend(): going to early suspend
<6>[ 1266.507968] msm_batt_send_event() : Suspend event ocurred.events = 00000001
<6>[ 1266.508059] msm_batt_early_suspend(): Handled early suspend event. rc = 0
<4>[ 1266.508106] [TSP] +qt602240_ts_suspend
<4>[ 1266.510269] [TSP] -qt602240_ts_suspend
<6>[ 1266.510991] [kr3dm_suspend] res = 2727
<6>[ 1266.511021] [kr3dm_suspend] data = 7
<4>[ 1266.515003] new_value = 0, old state = 1
<4>[ 1266.515044] cancelling poll timer
<6>[ 1266.541676] [kr3dm_suspend] KR3DM !!suspend mode!!
<4>[ 1266.571639] [HSIL] mdp_lcdc_off(355) mdp_lcdc_off start
<4>[ 1266.571723] [HSIL] mdp_lcdc_off(378) mdp_lcdc_off end
<4>[ 1266.571766] ta8566 [lcdc_ta8566_panel_poweroff]
<4>[ 1266.753096] ta8566 start ta8566_disp_powerdown
<4>[ 1266.811584] ta8566 lcdc_ta8566_set_backlight:0,0
<4>[ 1266.814774] [HSIL] mdp_suspend_sub(1387) will cancel_delayed_work
<4>[ 1266.814819] [HSIL] mdp_suspend_sub(1391) will flush_workqueue
<4>[ 1266.814866] [HSIL] mdp_suspend_sub(1395) will atomic_read
<4>[ 1266.814906] [HSIL] mdp_suspend_sub(1400) will mdp_pipe_ctrl
<4>[ 1266.814951] [HSIL] mdp_suspend_sub(1402) after mdp_pipe_ctrl
<6>[ 1269.144336] PM: Syncing filesystems ... done.
<4>[ 1269.146208] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1269.172359] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 1269.192234] Suspending console(s) (use no_console_suspend to debug)
<3>[ 1269.194899] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.194956] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.195069] [RPC] Wrote 80 bytes First 1 Last 1 mid 253
<3>[ 1269.196741] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1269.196958] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.197063] [RPC] READ on ept d3b75be0
<7>[ 1269.197163] msmrtc_tod_proc_result: 09/27/2011 10:18:57 (01)
<3>[ 1269.197264] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.197303] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.197374] [RPC] Wrote 80 bytes First 1 Last 1 mid 254
<3>[ 1269.198886] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1269.199234] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.199283] [RPC] READ on ept d3b75be0
<7>[ 1269.199348] msmrtc_tod_proc_result: 09/27/2011 10:18:57 (01)
<3>[ 1269.199438] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.199478] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.199541] [RPC] Wrote 80 bytes First 1 Last 1 mid 255
<3>[ 1269.200866] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1269.201218] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.201266] [RPC] READ on ept d3b75be0
<7>[ 1269.201329] msmrtc_tod_proc_result: 09/27/2011 10:18:57 (01)
<3>[ 1269.202391] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.202433] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.202509] [RPC] Wrote 80 bytes First 1 Last 1 mid 0
<3>[ 1269.203311] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<3>[ 1269.203366] [RR] o RESUME_TX id=0:00000001
<3>[ 1269.204528] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1269.204873] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.204923] [RPC] READ on ept d3b75be0
<7>[ 1269.204989] msmrtc_tod_proc_result: 09/27/2011 10:18:57 (01)
<1>[ 1269.212734]
<1>[ 1269.212764] ar6000_check_wow_status: Received IRQ while we are wow suspending!!!
<1>[ 1269.212796]
<4>[ 1269.313933] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1269.314038] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1269.314084] AR6000: wow_suspend 1 check Rst PIN 1
<1>[ 1269.314114] Setup WoW successfully
<1>[ 1269.314149] ar6000_suspend_ev:Suspend for wow mode 3
<1>[ 1269.314196] ar6000_suspend_ev:Suspend for 2 mode pwr 3 status 13
<6>[ 1269.315914] sec_jack:sec_jack_suspend :micbias_reg5 off
<4>[ 1269.316236] [VIB] susepend
<4>[ 1269.318394] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1269.319009] PM: suspend of devices complete after 125.123 msecs
<6>[ 1269.320063] PM: late suspend of devices complete after 0.993 msecs
<6>[ 1269.321793] PM: early resume of devices complete after 1.169 msecs
<6>[ 1269.322099] wakeup wake lock: gpio_kp
<4>[ 1269.323369] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1269.363794] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
<4>[ 1269.365774] [VIB] resume
<4>[ 1269.471566] pc_clk_set_rate id : 19, rate : 144000
<4>[ 1269.471696] pc_clk_set_rate id : 0, rate : 144000
<4>[ 1269.471719] , rc : 0
<4>[ 1269.741868] pc_clk_set_rate id : 19, rate : 49152000
<4>[ 1269.742011] pc_clk_set_rate id : 0, rate : 49152000
<4>[ 1269.742036] , rc : 0
<1>[ 1269.742466] ar6000_resume_ev: enter previous state 3 wowState 2
<4>[ 1269.742514] AR6000: wow_resume 1 check Rst PIN 1
<4>[ 1269.742561] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1269.742649] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1269.742693] AR6000: wow_resume 2 check Rst PIN 1 pending 0
<1>[ 1269.743148] Resume WoW successfully
<4>[ 1269.743186] AR6000: wow_resume 3 check Rst PIN 1 pending 3
<3>[ 1269.743823] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.743868] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.743948] [RPC] Wrote 80 bytes First 1 Last 1 mid 1
<3>[ 1269.744641] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=60 dst=1:d3b75be0
<3>[ 1269.744753] [RR] x RESUME_TX id=1:d3b75be0
<3>[ 1269.744848] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.744904] [RPC] READ on ept d3b75be0
<7>[ 1269.745018] msmrtc_tod_proc_result: 09/27/2011 10:19:38 (01)
<3>[ 1269.746173] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1269.746218] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1269.746286] [RPC] Wrote 80 bytes First 1 Last 1 mid 2
<3>[ 1269.747028] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1269.747159] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1269.747211] [RPC] READ on ept d3b75be0
<7>[ 1269.747278] msmrtc_tod_proc_result: 09/27/2011 10:19:38 (01)
<6>[ 1269.749469] PM: resume of devices complete after 426.944 msecs
<4>[ 1269.750659] Restarting tasks ... done.
<6>[ 1269.782731] suspend: exit suspend, ret = 0 (2011-09-27 10:19:38.535351667 UTC)
<6>[ 1269.789184] request_suspend_state: wakeup (3->0) at 1269797684562 (2011-09-27 10:19:38.541790000 UTC)
<4>[ 1269.804258] [KeyLED] msm_keypad_bl_led_set: value=255
<4>[ 1269.827186] new_value = 1, old state = 0
<4>[ 1269.827236] starting poll timer, delay 200000000ns
<4>[ 1269.829561] new delay = 200000000ns, old delay = 200000000ns
<4>[ 1269.831188] new delay = 200000000ns, old delay = 200000000ns
<4>[ 1269.832824] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
<4>[ 1269.832944] polarity setting
<4>[ 1269.832974] ==============++minhyodebug : LCD CONTROLLER Registers Setting
<4>[ 1269.833026] display_hctl = 0xff0010
<4>[ 1269.833056] display_v_start = 0x860
<4>[ 1269.833084] display_v_end = 0x1ab1f
<4>[ 1269.833113] lcdc_border_clr = 0x0
<4>[ 1269.833141] lcdc_underflow_clr = 0xff
<4>[ 1269.833171] lcdc_hsync_skew = 0x0
<4>[ 1269.833199] ctrl_polarity = 0x3
<4>[ 1269.833226] active_hctl = 0x0
<4>[ 1269.833253] active_v_start = 0x0
<4>[ 1269.833279] active_v_end = 0x0
<4>[ 1269.833331] pc_clk_set_rate id : 42, rate : 9388000
<4>[ 1269.833454] pc_clk_set_rate id : 0, rate : 9388000
<4>[ 1269.833478] , rc : 0
<4>[ 1269.833941] ta8566 [lcdc_ta8566_panel_poweron]
<4>[ 1269.833974] ta8566 start ta8566_disp_powerup
<4>[ 1269.850393] ta8566 start ta8566_disp_on
<4>[ 1270.171728] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
<4>[ 1270.201668] ta8566 lcdc_ta8566_set_backlight:0,0
<6>[ 1270.224881] [kr3dm_resume] res = 707
<6>[ 1270.224919] [kr3dm_resume] data = 27
<4>[ 1270.225376] starting poll timer, delay 200000000ns
<6>[ 1270.225436] [kr3dm_resume] KR3DM !!resume mode!!
<4>[ 1270.225469] [TSP] +qt602240_ts_resume
<4>[ 1270.227003] [TSP] -qt602240_ts_resume
<6>[ 1270.227034] msm_batt_late_resume(): going to resume
<6>[ 1270.227073] msm_batt_send_event() : Resume event ocurred.events = 00000002
<6>[ 1270.227153] msm_batt_late_resume(): Handled Late resume event. rc = 0
<4>[ 1270.227204] ta8566 lcdc_ta8566_set_backlight:17,7
<4>[ 1270.227799] ta8566 lcdc_ta8566_set_backlight:34,12
<4>[ 1270.228401] ta8566 lcdc_ta8566_set_backlight:51,16
<4>[ 1270.229013] ta8566 lcdc_ta8566_set_backlight:68,19
<4>[ 1270.229631] ta8566 lcdc_ta8566_set_backlight:85,23
<4>[ 1270.230243] ta8566 lcdc_ta8566_set_backlight:102,26
<4>[ 1270.271804] ta8566 lcdc_ta8566_set_backlight:119,30
<4>[ 1270.272438] ta8566 lcdc_ta8566_set_backlight:136,33
<4>[ 1270.273058] ta8566 lcdc_ta8566_set_backlight:153,38
<4>[ 1270.273658] ta8566 lcdc_ta8566_set_backlight:170,42
<4>[ 1270.274268] ta8566 lcdc_ta8566_set_backlight:187,46
<4>[ 1270.274878] ta8566 lcdc_ta8566_set_backlight:204,49
<4>[ 1270.275498] ta8566 lcdc_ta8566_set_backlight:221,53
<4>[ 1270.276108] ta8566 lcdc_ta8566_set_backlight:238,57
<4>[ 1270.276719] ta8566 lcdc_ta8566_set_backlight:255,61
<4>[ 1270.293138] [TSP] reset acq atchcalst=0, atchcalsthr=0
<4>[ 1270.485773] [TSP] TA NON-Detect!!!
<4>[ 1270.488446] [TSP] Dump state, last rst=5
<4>[ 1270.488468] #1=0,#2=0,#3=0,#4=0,#5=17,#6=0,#7=0,#8=0,#9=0,#10=0
<4>[ 1270.490559] [TSP] Calibrating : msg[0] = 1, msg[1] = 144
<4>[ 1270.506498] [TSP] Dump state, msg[0]=0x4, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.508508] [TSP] Dump state, msg[0]=0x5, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.510494] [TSP] Dump state, msg[0]=0x6, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.512548] [TSP] Dump state, msg[0]=0x7, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.523574] [TSP] Dump state, msg[0]=0x8, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.525623] [TSP] Dump state, msg[0]=0x9, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.527618] [TSP] Palm Touch! - 0 released, Ver. 21
<4>[ 1270.529604] [TSP] Dump state, msg[0]=0xD, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.543478] [TSP] Dump state, msg[0]=0x14, [1]=0x0, [2]=0x0, [3]=0x0, [4]=0x0, [5]=0x0
<4>[ 1270.545526] [TSP] msg[0] = 1, msg[1] = 0
<4>[ 1270.547819] [TSP] Dump state, msg[0]=0xFF, [1]=0x0, [2]=0x7A, [3]=0x50, [4]=0x3C, [5]=0x0
<4>[ 1274.829303] [KeyLED] msm_keypad_bl_led_set: value=0
<4>[ 1274.830536] ta8566 lcdc_ta8566_set_backlight:238,57
<4>[ 1274.847226] ta8566 lcdc_ta8566_set_backlight:221,53
<4>[ 1274.863794] ta8566 lcdc_ta8566_set_backlight:204,49
<4>[ 1274.879408] ta8566 lcdc_ta8566_set_backlight:187,46
<4>[ 1274.895973] ta8566 lcdc_ta8566_set_backlight:170,42
<4>[ 1274.912513] ta8566 lcdc_ta8566_set_backlight:153,38
<4>[ 1274.928039] ta8566 lcdc_ta8566_set_backlight:136,33
<4>[ 1274.944579] ta8566 lcdc_ta8566_set_backlight:119,30
<4>[ 1274.960348] ta8566 lcdc_ta8566_set_backlight:102,26
<4>[ 1274.976919] ta8566 lcdc_ta8566_set_backlight:85,23
<4>[ 1274.992521] ta8566 lcdc_ta8566_set_backlight:68,19
<4>[ 1275.009059] ta8566 lcdc_ta8566_set_backlight:51,16
<4>[ 1275.025626] ta8566 lcdc_ta8566_set_backlight:34,12
<4>[ 1275.041266] ta8566 lcdc_ta8566_set_backlight:17,7
<6>[ 1275.058176] request_suspend_state: sleep (0->3) at 1275066686228 (2011-09-27 10:19:43.810789999 UTC)
<4>[ 1275.059289] ta8566 lcdc_ta8566_set_backlight:0,0
<4>[ 1275.065849] new_value = 0, old state = 1
<4>[ 1275.065888] cancelling poll timer
<6>[ 1275.076934] msm_batt_early_suspend(): going to early suspend
<6>[ 1275.076999] msm_batt_send_event() : Suspend event ocurred.events = 00000001
<6>[ 1275.077091] msm_batt_early_suspend(): Handled early suspend event. rc = 0
<4>[ 1275.077138] [TSP] +qt602240_ts_suspend
<4>[ 1275.079284] [TSP] -qt602240_ts_suspend
<6>[ 1275.080004] [kr3dm_suspend] res = 2727
<6>[ 1275.080036] [kr3dm_suspend] data = 7
<6>[ 1275.080493] [kr3dm_suspend] KR3DM !!suspend mode!!
<4>[ 1275.133279] [HSIL] mdp_lcdc_off(355) mdp_lcdc_off start
<4>[ 1275.133318] [HSIL] mdp_lcdc_off(378) mdp_lcdc_off end
<4>[ 1275.133338] ta8566 [lcdc_ta8566_panel_poweroff]
<4>[ 1275.313124] ta8566 start ta8566_disp_powerdown
<4>[ 1275.371611] ta8566 lcdc_ta8566_set_backlight:0,0
<4>[ 1275.374809] [HSIL] mdp_suspend_sub(1387) will cancel_delayed_work
<4>[ 1275.374854] [HSIL] mdp_suspend_sub(1391) will flush_workqueue
<4>[ 1275.374901] [HSIL] mdp_suspend_sub(1395) will atomic_read
<4>[ 1275.374941] [HSIL] mdp_suspend_sub(1400) will mdp_pipe_ctrl
<4>[ 1275.374986] [HSIL] mdp_suspend_sub(1402) after mdp_pipe_ctrl
<6>[ 1276.404448] PM: Syncing filesystems ... done.
<4>[ 1276.406313] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1276.432369] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 1276.452249] Suspending console(s) (use no_console_suspend to debug)
<3>[ 1276.454924] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1276.454978] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1276.455089] [RPC] Wrote 80 bytes First 1 Last 1 mid 3
<3>[ 1276.456773] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1276.456999] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1276.457106] [RPC] READ on ept d3b75be0
Click to expand...
Click to collapse
------------ Second wake, now screen goes back to normal:
<7>[ 1276.457203] msmrtc_tod_proc_result: 09/27/2011 10:19:45 (01)
<3>[ 1276.457303] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1276.457343] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1276.457411] [RPC] Wrote 80 bytes First 1 Last 1 mid 4
<3>[ 1276.458741] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1276.459086] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1276.459136] [RPC] READ on ept d3b75be0
<7>[ 1276.459201] msmrtc_tod_proc_result: 09/27/2011 10:19:45 (01)
<3>[ 1276.459284] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1276.459326] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1276.459396] [RPC] Wrote 80 bytes First 1 Last 1 mid 5
<3>[ 1276.460149] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<3>[ 1276.460216] [RR] o RESUME_TX id=0:00000001
<3>[ 1276.461393] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1276.461766] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1276.461814] [RPC] READ on ept d3b75be0
<7>[ 1276.461883] msmrtc_tod_proc_result: 09/27/2011 10:19:45 (01)
<3>[ 1276.462833] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1276.462876] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1276.462948] [RPC] Wrote 80 bytes First 1 Last 1 mid 6
<3>[ 1276.464249] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=60 dst=1:d3b75be0
<3>[ 1276.464571] [RR] x RESUME_TX id=1:d3b75be0
<3>[ 1276.464659] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1276.464709] [RPC] READ on ept d3b75be0
<7>[ 1276.464776] msmrtc_tod_proc_result: 09/27/2011 10:19:45 (01)
<4>[ 1276.573863] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1276.573974] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1276.574021] AR6000: wow_suspend 1 check Rst PIN 1
<1>[ 1276.574053] Setup WoW successfully
<1>[ 1276.574088] ar6000_suspend_ev:Suspend for wow mode 3
<1>[ 1276.574134] ar6000_suspend_ev:Suspend for 2 mode pwr 3 status 13
<6>[ 1276.575946] sec_jack:sec_jack_suspend :micbias_reg5 off
<4>[ 1276.576241] [VIB] susepend
<4>[ 1276.578329] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1276.578949] PM: suspend of devices complete after 125.040 msecs
<3>[ 1276.580044] pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
<3>[ 1276.580094] PM: Device power.0 failed to suspend late: error -11
<6>[ 1276.580438] PM: early resume of devices complete after 0.284 msecs
<3>[ 1276.580653] PM: Some devices failed to power down
<4>[ 1276.580879] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1276.623824] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
<6>[ 1276.624401] wakeup wake lock: power-supply
<4>[ 1276.625258] [VIB] resume
<4>[ 1276.731536] pc_clk_set_rate id : 19, rate : 144000
<4>[ 1276.731671] pc_clk_set_rate id : 0, rate : 144000
<4>[ 1276.731694] , rc : 0
<4>[ 1277.002196] pc_clk_set_rate id : 19, rate : 49152000
<4>[ 1277.002366] pc_clk_set_rate id : 0, rate : 49152000
<4>[ 1277.002389] , rc : 0
<1>[ 1277.002806] ar6000_resume_ev: enter previous state 3 wowState 2
<4>[ 1277.002854] AR6000: wow_resume 1 check Rst PIN 1
<4>[ 1277.002899] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1277.002991] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1277.003033] AR6000: wow_resume 2 check Rst PIN 1 pending 0
<1>[ 1277.003464] Resume WoW successfully
<4>[ 1277.003499] AR6000: wow_resume 3 check Rst PIN 1 pending 3
<3>[ 1277.004139] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1277.004183] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1277.004263] [RPC] Wrote 80 bytes First 1 Last 1 mid 7
<3>[ 1277.004953] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1277.005104] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1277.005163] [RPC] READ on ept d3b75be0
<7>[ 1277.005233] msmrtc_tod_proc_result: 09/27/2011 10:19:46 (01)
<3>[ 1277.006399] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1277.006443] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1277.006509] [RPC] Wrote 80 bytes First 1 Last 1 mid 8
<3>[ 1277.007083] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1277.007219] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1277.007273] [RPC] READ on ept d3b75be0
<7>[ 1277.007339] msmrtc_tod_proc_result: 09/27/2011 10:19:46 (01)
<6>[ 1277.007993] PM: resume of devices complete after 427.286 msecs
<4>[ 1277.009809] Restarting tasks ... done.
<6>[ 1277.052573] suspend: exit suspend, ret = 0 (2011-09-27 10:19:46.545141663 UTC)
<6>[ 1281.107244] PM: Syncing filesystems ... done.
<4>[ 1281.109084] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 1281.142326] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 1281.162144] Suspending console(s) (use no_console_suspend to debug)
<3>[ 1281.164826] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.164881] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.164994] [RPC] Wrote 80 bytes First 1 Last 1 mid 9
<3>[ 1281.166668] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1281.166898] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.166999] [RPC] READ on ept d3b75be0
<7>[ 1281.167103] msmrtc_tod_proc_result: 09/27/2011 10:19:50 (01)
<3>[ 1281.167204] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.167244] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.167316] [RPC] Wrote 80 bytes First 1 Last 1 mid 10
<3>[ 1281.168206] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
<3>[ 1281.168261] [RR] o RESUME_TX id=0:00000001
<3>[ 1281.169443] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1281.169789] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.169838] [RPC] READ on ept d3b75be0
<7>[ 1281.169903] msmrtc_tod_proc_result: 09/27/2011 10:19:50 (01)
<3>[ 1281.169993] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.170033] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.170104] [RPC] Wrote 80 bytes First 1 Last 1 mid 11
<3>[ 1281.171463] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=60 dst=1:d3b75be0
<3>[ 1281.171676] [RR] x RESUME_TX id=1:d3b75be0
<3>[ 1281.171861] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.171913] [RPC] READ on ept d3b75be0
<7>[ 1281.171991] msmrtc_tod_proc_result: 09/27/2011 10:19:50 (01)
<3>[ 1281.172996] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.173041] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.173111] [RPC] Wrote 80 bytes First 1 Last 1 mid 12
<3>[ 1281.174414] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1281.174771] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.174823] [RPC] READ on ept d3b75be0
<7>[ 1281.174889] msmrtc_tod_proc_result: 09/27/2011 10:19:50 (01)
<4>[ 1281.283921] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1281.284031] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1281.284078] AR6000: wow_suspend 1 check Rst PIN 1
<1>[ 1281.284109] Setup WoW successfully
<1>[ 1281.284146] ar6000_suspend_ev:Suspend for wow mode 3
<1>[ 1281.284191] ar6000_suspend_ev:Suspend for 2 mode pwr 3 status 13
<6>[ 1281.285934] sec_jack:sec_jack_suspend :micbias_reg5 off
<4>[ 1281.286264] [VIB] susepend
<4>[ 1281.288338] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1281.288934] PM: suspend of devices complete after 125.125 msecs
<6>[ 1281.289959] PM: late suspend of devices complete after 0.966 msecs
<6>[ 1281.291533] PM: early resume of devices complete after 1.019 msecs
<6>[ 1281.292001] wakeup wake lock: gpio_kp
<4>[ 1281.293256] [KeyLED] msm_keypad_bl_led_set: value=0
<6>[ 1281.333823] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
<4>[ 1281.335793] [VIB] resume
<4>[ 1281.441608] pc_clk_set_rate id : 19, rate : 144000
<4>[ 1281.441738] pc_clk_set_rate id : 0, rate : 144000
<4>[ 1281.441761] , rc : 0
<4>[ 1281.711799] pc_clk_set_rate id : 19, rate : 49152000
<4>[ 1281.711929] pc_clk_set_rate id : 0, rate : 49152000
<4>[ 1281.711954] , rc : 0
<1>[ 1281.712368] ar6000_resume_ev: enter previous state 3 wowState 2
<4>[ 1281.712414] AR6000: wow_resume 1 check Rst PIN 1
<4>[ 1281.712461] AR6000: SdioEnable4bits 1 check Rst PIN 1
<4>[ 1281.712534] AR6000: SdioEnable4bits 2 check Rst PIN 1
<4>[ 1281.712576] AR6000: wow_resume 2 check Rst PIN 1 pending 0
<1>[ 1281.713036] Resume WoW successfully
<4>[ 1281.713073] AR6000: wow_resume 3 check Rst PIN 1 pending 3
<3>[ 1281.713709] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.713754] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.713834] [RPC] Wrote 80 bytes First 1 Last 1 mid 13
<3>[ 1281.714526] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1281.714684] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.714743] [RPC] READ on ept d3b75be0
<7>[ 1281.714814] msmrtc_tod_proc_result: 09/27/2011 10:22:00 (01)
<3>[ 1281.715963] [RPC] CALL to 30000048:65537 @ 0:00000001 (44 bytes)
<3>[ 1281.716008] [RPC] Writing 44 bytes, max pkt size is 500
<3>[ 1281.716076] [RPC] Wrote 80 bytes First 1 Last 1 mid 14
<3>[ 1281.716646] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3b75be0
<3>[ 1281.716783] [RPC] READ on ept d3b75be0 (56 bytes)
<3>[ 1281.716836] [RPC] READ on ept d3b75be0
<7>[ 1281.716903] msmrtc_tod_proc_result: 09/27/2011 10:22:00 (01)
<6>[ 1281.717598] PM: resume of devices complete after 425.181 msecs
<4>[ 1281.719373] Restarting tasks ...
<6>[ 1281.744528] request_suspend_state: wakeup (3->0) at 1281753002954 (2011-09-27 10:22:00.527500000 UTC)
<4>[ 1281.757008] new_value = 1, old state = 0
<4>[ 1281.757058] starting poll timer, delay 200000000ns
<4>[ 1281.759369] new delay = 200000000ns, old delay = 200000000ns
<4>[ 1281.760976] new delay = 200000000ns, old delay = 200000000ns
<4>[ 1281.832674] done.
<6>[ 1281.833309] suspend: exit suspend, ret = 0 (2011-09-27 10:22:00.616306667 UTC)
<4>[ 1281.833383] [KeyLED] msm_keypad_bl_led_set: value=255
<4>[ 1281.861778] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
<4>[ 1281.861986] polarity setting
<4>[ 1281.862023] ==============++minhyodebug : LCD CONTROLLER Registers Setting
<4>[ 1281.862078] display_hctl = 0xff0010
<4>[ 1281.862108] display_v_start = 0x860
<4>[ 1281.862138] display_v_end = 0x1ab1f
<4>[ 1281.862166] lcdc_border_clr = 0x0
<4>[ 1281.862196] lcdc_underflow_clr = 0xff
<4>[ 1281.862226] lcdc_hsync_skew = 0x0
<4>[ 1281.862254] ctrl_polarity = 0x3
<4>[ 1281.862281] active_hctl = 0x0
<4>[ 1281.862308] active_v_start = 0x0
<4>[ 1281.862336] active_v_end = 0x0
<4>[ 1281.863328] pc_clk_set_rate id : 42, rate : 9388000
<4>[ 1281.863466] pc_clk_set_rate id : 0, rate : 9388000
<4>[ 1281.863489] , rc : 0
<4>[ 1281.864011] ta8566 [lcdc_ta8566_panel_poweron]
<4>[ 1281.864044] ta8566 start ta8566_disp_powerup
<4>[ 1281.864324] ta8566 start ta8566_disp_on
<4>[ 1282.171668] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
<4>[ 1282.201666] ta8566 lcdc_ta8566_set_backlight:0,0
<6>[ 1282.205643] [kr3dm_resume] res = 707
<6>[ 1282.205669] [kr3dm_resume] data = 27
<4>[ 1282.206123] starting poll timer, delay 200000000ns
<6>[ 1282.206168] [kr3dm_resume] KR3DM !!resume mode!!
<4>[ 1282.206201] [TSP] +qt602240_ts_resume
<4>[ 1282.219094] [TSP] -qt602240_ts_resume
<6>[ 1282.219151] msm_batt_late_resume(): going to resume
<6>[ 1282.219194] msm_batt_send_event() : Resume event ocurred.events = 00000002
<6>[ 1282.219284] msm_batt_late_resume(): Handled Late resume event. rc = 0
<4>[ 1282.219343] ta8566 lcdc_ta8566_set_backlight:17,7
<4>[ 1282.219941] ta8566 lcdc_ta8566_set_backlight:34,12
<4>[ 1282.220544] ta8566 lcdc_ta8566_set_backlight:51,16
<4>[ 1282.221158] ta8566 lcdc_ta8566_set_backlight:68,19
<4>[ 1282.229346] ta8566 lcdc_ta8566_set_backlight:85,23
<4>[ 1282.229976] ta8566 lcdc_ta8566_set_backlight:102,26
<4>[ 1282.230599] ta8566 lcdc_ta8566_set_backlight:119,30
<4>[ 1282.231213] ta8566 lcdc_ta8566_set_backlight:136,33
<4>[ 1282.232426] ta8566 lcdc_ta8566_set_backlight:153,38
<4>[ 1282.249603] [TSP] reset acq atchcalst=0, atchcalsthr=0
<4>[ 1282.251688] ta8566 lcdc_ta8566_set_backlight:170,42
<4>[ 1282.252311] ta8566 lcdc_ta8566_set_backlight:187,46
<4>[ 1282.252924] ta8566 lcdc_ta8566_set_backlight:204,49
<4>[ 1282.253546] ta8566 lcdc_ta8566_set_backlight:221,53
<4>[ 1282.254159] ta8566 lcdc_ta8566_set_backlight:238,57
<4>[ 1282.254773] ta8566 lcdc_ta8566_set_backlight:255,61
<4>[ 1282.462469] [TSP] TA NON-Detect!!!
<4>[ 1282.464831] [TSP] Dump state, last rst=5
<4>[ 1282.464848] #1=0,#2=0,#3=0,#4=0,#5=17,#6=0,#7=0,#8=0,#9=0,#10=0
Click to expand...
Click to collapse
Scylla.bx said:
Not working for me.
I've replace the file with my froyo backup and nothing have change...
I'm running with azerty keyboard, Arkas 1.2 – Ganymede 3 custom rom
Click to expand...
Click to collapse
I think we just have to wait for a firmware with the proper files
Edit qwerty.kl to support AZERTY
didhiy said:
well, actually I use qwerty not azerty.. I found this one file enough to fix some weird character on mine
if you have former froyo files, maybe you can try to copying all file to /keychar & /keylayout with renaming the callisto_ file with sec_
in my case the froyo qwerty.kl will make the alt function act like second alpha keyboard layout. maybe your azerty.kl will different
Click to expand...
Click to collapse
Here is the the qwerty.kl from mine:
Code:
key 399 GRAVE
key 2 1
key 3 2
key 4 3
key 5 4
key 6 5
key 7 6
key 8 7
key 9 8
key 10 9
key 11 0
key 158 BACK WAKE_DROPPED
key 230 SOFT_RIGHT WAKE
key 60 SOFT_RIGHT WAKE
key 107 ENDCALL WAKE_DROPPED
key 62 ENDCALL WAKE_DROPPED
key 229 MENU WAKE_DROPPED
key 139 MENU WAKE_DROPPED
key 59 MENU WAKE_DROPPED
key 127 SEARCH WAKE_DROPPED
key 217 SEARCH WAKE_DROPPED
key 228 POUND
key 227 STAR
key 231 CALL WAKE_DROPPED
key 61 CALL WAKE_DROPPED
key 232 DPAD_CENTER WAKE_DROPPED
key 108 DPAD_DOWN WAKE_DROPPED
key 103 DPAD_UP WAKE_DROPPED
key 102 HOME WAKE
key 105 DPAD_LEFT WAKE_DROPPED
key 106 DPAD_RIGHT WAKE_DROPPED
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 116 POWER WAKE
key 212 CAMERA
key 16 Q
key 17 W
key 18 E
key 19 R
key 20 T
key 21 Y
key 22 U
key 23 I
key 24 O
key 25 P
key 26 LEFT_BRACKET
key 27 RIGHT_BRACKET
key 43 BACKSLASH
key 30 A
key 31 S
key 32 D
key 33 F
key 34 G
key 35 H
key 36 J
key 37 K
key 38 L
key 39 SEMICOLON
key 40 APOSTROPHE
key 14 DEL
key 44 Z
key 45 X
key 46 C
key 47 V
key 48 B
key 49 N
key 50 M
key 51 COMMA
key 52 PERIOD
key 53 SLASH
key 28 ENTER
key 56 ALT_LEFT
key 100 ALT_RIGHT
key 42 SHIFT_LEFT
key 54 SHIFT_RIGHT
key 15 TAB
key 57 SPACE
key 150 EXPLORER
key 155 ENVELOPE
key 12 MINUS
key 13 EQUALS
key 215 AT
# On an AT keyboard: ESC, F10
key 1 BACK WAKE_DROPPED
key 68 MENU WAKE_DROPPED
Maybe it's safe to edit the file to suits the azerty.. *just an idea*
GB updated my Market to 3.1.5 and now I can't install many of applications as Market does not show them or prevent from installing because it is incompatible with my phone. Any hint how to downgrade or make it working again ?
jazzzy said:
GB updated my Market to 3.1.5 and now I can't install many of applications as Market does not show them or prevent from installing because it is incompatible with my phone. Any hint how to downgrade or make it working again ?
Click to expand...
Click to collapse
Try uninstalling via Titanium Backup or some other app which can remove as root and then install the apk from here: http://android.modaco.com/topic/325980-new-style-market-apk-downloads/
EDIT: Also, some PDF-sheet from samfirmware IIRC mentions TV-out as a feature, is there such a feature or is it simply an error? I'd love a TV-out feature, whether it's hdmi/composite.
didhiy said:
Maybe it's safe to edit the file to suits the azerty.. *just an idea*
Click to expand...
Click to collapse
Done, thanks for the info !
http://forum.xda-developers.com/showpost.php?p=18015123&postcount=2
bootanimation won't stop
I try to enabling the bootanimation.zip file on /system/media
first I enabling the bootanim on init.rc file than packed it again to boot.img, the result is nothing
then try to renaming /system/bin/bootanimation to /system/bin/samsungani, it works but the animation won't stop..
any idea to solve this problem?
Solved
on property:dev.bootcomplete〓1
stop samsungani
Now I have bootanimation enable on gingerbread
I don't know if this was already know, but the USB JIG used to put the I9000 in Download Mode also seem to work with the I5510. I haven't yet tried to flash something, so this might not work.
In the attachement you can find a screenshot. It says "MDL Factory download mode ...". So this is different from the normal Download Mode screen.
Edit: Just saw that it was already postet yesteday, sorry
https://galaxy551.wordpress.com/2011/09/30/usb-jig-and-third-download-mode/
So it seems that flashing with ODIN works, putting the phone into this special Download Mode.
Does the official gingerbread works in every european cellphones?
TY
sindamc said:
Does the official gingerbread works in every european cellphones?
TY
Click to expand...
Click to collapse
Might as well be. I flashed my phone from Asia and it's worked fine besides the slideout keyboard fuss which can be fixed after a little tweaking...
hi,
I replaced the file like didhiy said and keyboard is now correct, but i still get the slavic characters when long-press keys, instead of á i get ä.
Anyone knows how to fix this?
Thanks
sindamc said:
Does the official gingerbread works in every european cellphones?
TY
Click to expand...
Click to collapse
Works fine for me, it even had the correct keyboard layout without me doing anything.
Torreip said:
Done, thanks for the info !
http://forum.xda-developers.com/showpost.php?p=18015123&postcount=2
Click to expand...
Click to collapse
thanks, it worked for me too! I will try to find a place for the equal sign too, it's pretty stupid they didn't put the '=' on the keypad

E400-Kernel 3.x

Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx
fergy said:
Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx
Click to expand...
Click to collapse
So, to reply to Myself:
#1 BMA2x2
<6>[ 1.992438] bma2x2_probe
<6>[ 2.243759] Bosch Sensortec Device not foundi2c error 8063
<4>[ 2.244029] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 2.244374] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 2.244629]
<4>[ 2.244636] <6><><bmm_probe><1174>function entrance
<4>[ 2.245148]
<4>[ 2.245153] <6><><bmm_wakeup><193>waking up the chip...
<4>[ 4.020973]
<4>[ 4.020979] <6><><bmm_wakeup><209>wake up result: fail, tried times: 6
Click to expand...
Click to collapse
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
<4>[ 4.021373] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 4.021903] bmm050: probe of 4-0012 failed with error -5
Click to expand...
Click to collapse
#2 APDS9190:
<6>[ 4.075116] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 4.075329] proximity_apds9190 5-0039: probe error
Click to expand...
Click to collapse
#3 RT9396:
4>[ 0.513224] rt9396 init start
<6>[ 0.513616] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.514189] Registered led device: lcd-backlight
<3>[ 0.514208] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.514679] Registered led device: button-backlight
<3>[ 0.514696] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.515536] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.515883] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.516679] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.517026] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.517964] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.518169] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
Click to expand...
Click to collapse
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx
fergy said:
So, to reply to Myself:
#1 BMA2x2
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
#2 APDS9190:
#3 RT9396:
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx
Click to expand...
Click to collapse
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.
tudorsirb said:
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.
Click to expand...
Click to collapse
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4
fergy said:
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4
Click to expand...
Click to collapse
thank you fergy, just getting back to compiling
hecatae said:
thank you fergy, just getting back to compiling
Click to expand...
Click to collapse
BTW, right registers for L3:
Touch GPIO:
Code:
I2C_SDA 10
I2C_SCL 9
IRQ 39
I2C_SLAVE_ADDR 0x48
Sensor GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
Accel GPIO:
Code:
GPIO_INT 94
GPIO_I2C_SCL 49
GPIO_I2C_SDA 48
I2C_ADDRESS 0x48
Compas GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
GPIO_INT 35
I2C_ADDRESS 0x10
Proxi GPIO:
Code:
I2C_SCL 16
I2C_SDA 30
GPIO_DOUT 17
I2C_ADDRESS 0x44
LDO_NO_VCC 1
Note that You must rearrange voltage @Board-msm7x27a-regulator:
Code:
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n),
EDIT:
As from technical specs, power module must to give right power voltage for specific part of hardware so it can run.
Also, the rest of power registers:
Code:
PCOM_VREG_SMP(smps1, 3, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps2, 4, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps3, 2, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps4, 24, NULL, 2100000, 2100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* fergy(from shematics) : <lcd operating at 1.8v: VREG_MSME_1.8V, lcd firmware loader need 3.3v and other functions need 2.8v: VREG_LCD_2.8V> so ldo01 need this change here */
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo04, 50, NULL, 800000, 2850000, 0, -1, 0, 0, 0, 0, n), /* min (800000 -> 2850000) */
PCOM_VREG_LDO(ldo05, 45, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo06, 51, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo07, 0, NULL, 2600000, 2600000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo08, 9, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo09, 44, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo10, 52, NULL, 2800000, 3000000, 0, -1, 0, 0, 0, 0, p), /* min (2800000 -> 3000000) */
PCOM_VREG_LDO(ldo11, 53, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo12, 21, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo13, 18, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo14, 16, NULL, 3300000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo15, 54, NULL, 1800000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo16, 19, NULL, 3000000, 3000000, 0, -1, 0, 0, 0, 0, p), /* NFC 3.0 V */
PCOM_VREG_LDO(ldo17, 56, NULL, 3000000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (3000000 -> 3300000) */
PCOM_VREG_LDO(ldo18, 11, NULL, 2700000, 2700000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo19, 57, NULL, 1200000, 1800000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 1800000) */
/* not used vreg_ncp */
PCOM_VREG_NCP(ncp, 31, NULL, -1800000, -1800000, 0, 0, 0, 0, 0),
as per old regulato code:
Code:
RT8053_VREG_INIT(LDO1, 1200000, 3300000),
RT8053_VREG_INIT(LDO2, 1200000, 3300000),
RT8053_VREG_INIT(LDO3, 1200000, 3300000),
RT8053_VREG_INIT(LDO4, 800000, 2850000),
RT8053_VREG_INIT(LDO5, 1200000, 3300000),
RT8053_VREG_INIT(DCDC1, 800000, 2300000),
In attachments 7225A pinouts and LCD pinouts....
Enjoy in research.
PS, if You need any help, PM or em[email protected]
Cheers
PS2:
LOG from My Kernel:
Code:
<6>[-----------------------][ 0.000000] Booting Linux on physical CPU 0
<6>[-----------------------][ 0.000000] Initializing cgroup subsys cpu
<5>[-----------------------][ 0.000000] Linux version 3.4.0 ([email protected]) (gcc version 4.4.3 (GCC) ) #48 PREEMPT Wed Oct 23 00:39:38 CEST 2013
<4>[-----------------------][ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
<4>[-----------------------][ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[-----------------------][ 0.000000] Machine: LG MSM7225AB
<6>[-----------------------][ 0.000000] memory pool 3 (start 26600000 size 1a00000) initialized
<4>[-----------------------][ 0.000000] Memory policy: ECC disabled, Data cache writeback
<1>[-----------------------][ 0.000000] Initialized strongly ordered page successfully
<3>[-----------------------][ 0.000000] smem_find(137, 80): wrong size 64
<3>[-----------------------][ 0.000000] smem_find(137, 72): wrong size 64
<6>[-----------------------][ 0.000000] socinfo_init: v4, id=99, ver=1.1, raw_id=1540, raw_ver=1, hw_plat=2, hw_plat_ver=65536
<6>[-----------------------][ 0.000000] L310 cache controller enabled
<6>[-----------------------][ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c7, AUX_CTRL 0x00540000, Cache size: 262144 B
<7>[-----------------------][ 0.000000] On node 0 totalpages: 78592
<7>[-----------------------][ 0.000000] free_area_init_node: node 0, pgdat c092474c, node_mem_map c1055800
<7>[-----------------------][ 0.000000] Normal zone: 1436 pages used for memmap
<7>[-----------------------][ 0.000000] Normal zone: 0 pages reserved
<7>[-----------------------][ 0.000000] Normal zone: 77156 pages, LIFO batch:15
<6>[-----------------------][ 0.000000] allocating 1843200 bytes at c15f8000 (17f8000 physical) for fb
<6>[-----------------------][ 0.000000] Initialized persistent memory from 0ff00000-0ff3dffe
<7>[-----------------------][ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[-----------------------][ 0.000000] pcpu-alloc: [0] 0
<4>[-----------------------][ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 77156
<5>[-----------------------][ 0.000000] Kernel command line: androidboot.hardware=e0 lge.rev=rev_12 lge.reboot=reboot uart_console=disable lge.frst=flag3 kcal=000000000000000000 androidboot.emmc=true androidboot.serialno=1e2bf5 androidboot.baseband=msm
<6>[-----------------------][ 0.000000] BOARD: LGE rev_12
<6>[-----------------------][ 0.000000] rebootmode_setup , reboot_mode = 0
<6>[-----------------------][ 0.000000] UART CONSOLE : disable
<6>[-----------------------][ 0.000000] FRST MODE : flag3
<6>[-----------------------][ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[-----------------------][ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[-----------------------][ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.000000] Memory: 205MB 102MB = 307MB total
<5>[-----------------------][ 0.000000] Memory: 297260k/297260k available, 43732k reserved, 0K highmem
<5>[-----------------------][ 0.000000] Virtual kernel memory layout:
<5>[-----------------------][ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[-----------------------][ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[-----------------------][ 0.000000] vmalloc : 0xd5000000 - 0xff000000 ( 672 MB)
<5>[-----------------------][ 0.000000] lowmem : 0xc0000000 - 0xd4d00000 ( 333 MB)
<5>[-----------------------][ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[-----------------------][ 0.000000] .text : 0xc0008000 - 0xc0847368 (8445 kB)
<5>[-----------------------][ 0.000000] .init : 0xc0848000 - 0xc087a000 ( 200 kB)
<5>[-----------------------][ 0.000000] .data : 0xc087a000 - 0xc0940fb0 ( 796 kB)
<5>[-----------------------][ 0.000000] .bss : 0xc0940fd4 - 0xc0b32100 (1989 kB)
<6>[-----------------------][ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[-----------------------][ 0.000000] NR_IRQS:645
<6>[-----------------------][ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[-----------------------][ 0.000000] Console: colour dummy device 80x30
<6>[-----------------------][ 0.000000] console [tty0] enabled
<6>[-----------------------][ 0.001876] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
<6>[-----------------------][ 0.070119] pid_max: default: 32768 minimum: 301
<6>[-----------------------][ 0.070631] Mount-cache hash table entries: 512
<6>[-----------------------][ 0.071753] Initializing cgroup subsys cpuacct
<6>[-----------------------][ 0.071818] Initializing cgroup subsys devices
<6>[-----------------------][ 0.071871] Initializing cgroup subsys freezer
<6>[-----------------------][ 0.071919] Initializing cgroup subsys net_cls
<6>[-----------------------][ 0.072024] CPU: Testing write buffer coherency: ok
<6>[-----------------------][ 0.072586] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
<6>[-----------------------][ 0.072834] Setting up static identity map for 0x7d3118 - 0x7d317c
<6>[-----------------------][ 0.083881] dummy:
<6>[-----------------------][ 0.084523] NET: Registered protocol family 16
<6>[-----------------------][ 0.086551] gpiochip_add: registered GPIOs 0 to 15 on device: generic
<6>[-----------------------][ 0.086748] gpiochip_add: registered GPIOs 16 to 42 on device: generic
<6>[-----------------------][ 0.086933] gpiochip_add: registered GPIOs 43 to 67 on device: generic
<6>[-----------------------][ 0.087176] gpiochip_add: registered GPIOs 68 to 94 on device: generic
<6>[-----------------------][ 0.087364] gpiochip_add: registered GPIOs 95 to 106 on device: generic
<6>[-----------------------][ 0.087549] gpiochip_add: registered GPIOs 107 to 132 on device: generic
<6>[-----------------------][ 0.088831] Shared PLL control available.
<6>[-----------------------][ 0.092576] acpuclk_7627_probe()
<6>[-----------------------][ 0.093818] ACPU running at 600000 KHz
<6>[-----------------------][ 0.093869] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[-----------------------][ 0.093949] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094026] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094101] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 7 3 4 6
<6>[-----------------------][ 0.094178] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094254] 4 300000 2 4 37500 4 122880 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094331] 5 320000 0 3 40000 4 122880 -1 1 4 -1 7 -1 8 6
<6>[-----------------------][ 0.094408] 6 400000 4 2 50000 4 122880 5 1 4 -1 7 -1 8 9
<6>[-----------------------][ 0.094483] 7 480000 0 2 60000 4 122880 5 2 4 6 -1 -1 8 9
<6>[-----------------------][ 0.094559] 8 600000 2 2 75000 4 160000 5 3 4 6 -1 -1 -1 9
<6>[-----------------------][ 0.094636] 9 800000 4 1 100000 4 200000 7 -1 8 6 -1 -1 -1 -1
<6>[-----------------------][ 0.094703] CPU0: 6 scaling frequencies supported.
<6>[-----------------------][ 0.095214] smps1: 1100 mV normal
<6>[-----------------------][ 0.095743] smps2: 1100 mV normal
<6>[-----------------------][ 0.096164] smps3: 1800 mV normal
<6>[-----------------------][ 0.096599] smps4: 2100 mV normal
<6>[-----------------------][ 0.097064] ldo01: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097509] ldo02: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097953] ldo03: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.098393] ldo04: 800 <--> 2850 mV normal
<6>[-----------------------][ 0.098834] ldo05: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.099313] ldo06: 1200 mV normal
<6>[-----------------------][ 0.099759] ldo07: 2600 mV normal
<6>[-----------------------][ 0.100199] ldo08: 2850 mV normal
<6>[-----------------------][ 0.100731] ldo09: 1800 mV normal
<6>[-----------------------][ 0.101181] ldo10: 2800 <--> 3000 mV normal
<6>[-----------------------][ 0.101678] ldo11: 1800 mV normal
<6>[-----------------------][ 0.102103] ldo12: 2850 mV normal
<6>[-----------------------][ 0.102574] ldo13: 2850 mV normal
<6>[-----------------------][ 0.103053] ldo14: 3300 mV normal
<6>[-----------------------][ 0.103509] ldo15: 1800 <--> 2850 mV normal
<6>[-----------------------][ 0.103969] ldo16: 3000 mV normal
<6>[-----------------------][ 0.104403] ldo17: 3000 <--> 3300 mV normal
<6>[-----------------------][ 0.104868] ldo18: 2700 mV normal
<6>[-----------------------][ 0.105323] ldo19: 1200 <--> 1800 mV normal
<6>[-----------------------][ 0.105784] ncp: 1800 mV normal
<6>[-----------------------][ 0.108236] persistent_ram: uncorrectable error in header
<6>[-----------------------][ 0.108313] persistent_ram: no valid data in buffer (sig = 0x00000000)
<6>[-----------------------][ 0.134009] console [ram-1] enabled
<4>[-----------------------][ 0.135923] smps3: Failed to create debugfs directory
<6>[-----------------------][ 0.136394] ebi2_tovis_power_save: on=1
<5>[-----------------------][ 0.141893] Boot Reason = 0x01
<6>[-----------------------][ 0.142263] CRASH LOG START ADDR : 0xcf3e000
<6>[-----------------------][ 0.142609] CRASH LOG END ADDR : 0xcf3efff
<6>[-----------------------][ 0.148831] fs_gfx3d: normal
<6>[-----------------------][ 0.189384] bio: create slab <bio-0> at 0
<6>[-----------------------][ 0.190898] ION heap vmalloc created
<6>[-----------------------][ 0.191329] ION heap camera_preview created at 26600000 with size 1000000
<6>[-----------------------][ 0.191736] ION heap audio created at 27600000 with size 22e000
<6>[-----------------------][ 0.192001] ION heap sf created at 2782e000 with size 7a0000
<5>[-----------------------][ 0.193088] SCSI subsystem initialized
<6>[-----------------------][ 0.193954] usbcore: registered new interface driver usbfs
<6>[-----------------------][ 0.194446] usbcore: registered new interface driver hub
<6>[-----------------------][ 0.195166] usbcore: registered new device driver usb
<6>[-----------------------][ 0.196259] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[-----------------------][ 0.196898] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[-----------------------][ 0.197789] i2c-gpio i2c-gpio.4: using pins 48 (SDA) and 49 (SCL)
<6>[-----------------------][ 0.198544] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[-----------------------][ 0.198966] Linux media interface: v0.10
<6>[-----------------------][ 0.199259] Linux video capture interface: v2.00
<6>[-----------------------][ 0.200178] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[-----------------------][ 0.201623] Bluetooth: Core ver 2.16
<6>[-----------------------][ 0.201926] NET: Registered protocol family 31
<6>[-----------------------][ 0.202276] Bluetooth: HCI device and connection manager initialized
<6>[-----------------------][ 0.202509] Bluetooth: HCI socket layer initialized
<6>[-----------------------][ 0.202861] Bluetooth: L2CAP socket layer initialized
<6>[-----------------------][ 0.203661] Bluetooth: SCO socket layer initialized
<6>[-----------------------][ 0.204669] cfg80211: Calling CRDA to update world regulatory domain
<6>[-----------------------][ 0.206219] Switching to clocksource dg_timer
<6>[-----------------------][ 0.256563] NET: Registered protocol family 2
<6>[-----------------------][ 0.257419] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[-----------------------][ 0.259088] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.261809] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
<6>[-----------------------][ 0.263358] TCP: Hash tables configured (established 16384 bind 16384)
<6>[-----------------------][ 0.263611] TCP: reno registered
<6>[-----------------------][ 0.264063] UDP hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.264561] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.265464] NET: Registered protocol family 1
<6>[-----------------------][ 0.266373] Unpacking initramfs...
<6>[-----------------------][ 0.306193] Freeing initrd memory: 320K
<3>[-----------------------][ 0.313148] Notify: smsm init
<4>[-----------------------][ 0.313904] get_nand_partitions: no flash partition table in shared memory
<6>[-----------------------][ 0.321429] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[-----------------------][ 0.325761] rpcrouter: Server create rejected, version = 0, program = 3000003b
<6>[-----------------------][ 0.330666] [adsp.c:adsp_init] rs00000000 -- 0
<6>[-----------------------][ 0.332506] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[-----------------------][ 0.332884] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[-----------------------][ 0.333251] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[-----------------------][ 0.333473] [audpp.c:audpp_probe] queueid:13
<6>[-----------------------][ 0.333819] [audpp.c:audpp_probe] decid:0
<6>[-----------------------][ 0.334166] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.334383] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[-----------------------][ 0.334739] [audpp.c:audpp_probe] queueid:14
<6>[-----------------------][ 0.334944] [audpp.c:audpp_probe] decid:1
<6>[-----------------------][ 0.335288] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.335643] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[-----------------------][ 0.335863] [audpp.c:audpp_probe] queueid:15
<6>[-----------------------][ 0.336209] [audpp.c:audpp_probe] decid:2
<6>[-----------------------][ 0.336414] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.350538] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[-----------------------][ 0.350906] [audpp.c:audpp_probe] queueid:16
<6>[-----------------------][ 0.351254] [audpp.c:audpp_probe] decid:3
<6>[-----------------------][ 0.351459] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.351814] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[-----------------------][ 0.352173] [audpp.c:audpp_probe] queueid:17
<6>[-----------------------][ 0.352379] [audpp.c:audpp_probe] decid:4
<6>[-----------------------][ 0.352724] [audpp.c:audpp_probe] nr_codec_support:1
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** CUT *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
<4>[-----------------------][ 0.612901] BU61800 init start
<7>[-----------------------][ 0.613764] Registered led device: lcd-backlight
<3>[-----------------------][ 0.613788] bu61800bl:bu61800_probe: Registering led class dev successfully.
<7>[-----------------------][ 0.614201] Registered led device: button-backlight
<3>[-----------------------][ 0.614221] bu61800bl:bu61800_probe: Registering led class dev successfully.
<3>[-----------------------][ 0.618993] bu61800bl:bu61800_probe: done
<6>[-----------------------][ 0.622471] setting pdata->panel_info.fb_num to 3. type: 2
<6>[-----------------------][ 0.624686] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<4>[-----------------------][ 0.625536] Read GPIO LCD port 1
<6>[-----------------------][ 0.909313] input: touch_mcs8000 as /devices/virtual/input/input0
<7>[-----------------------][ 0.909939] evbug: Connected device: input0 (touch_mcs8000 at unknown)
<6>[-----------------------][ 0.910596] ts_set_veg : 0
<6>[-----------------------][ 0.936828] ts_set_veg : 1
<6>[-----------------------][ 0.976683] Touchscreen is connected to the board
<4>[-----------------------][ 1.049021] <MELFAS> CORE_VERSION : 0x D
<4>[-----------------------][ 1.050483] GPIO Matrix Keypad Driver: Start keypad matrix for e0_keypad in interrupt mode
<6>[-----------------------][ 1.051456] input: e0_keypad as /devices/virtual/input/input1
<7>[-----------------------][ 1.052071] evbug: Connected device: input1 (e0_keypad at unknown)
<6>[-----------------------][ 1.053309] Bosch Sensortec Device detected!
<6>[-----------------------][ 1.053323] BMA250 registered I2C driver!
<6>[-----------------------][ 1.054269] input: bma250 as /devices/virtual/input/input2
<7>[-----------------------][ 1.054696] evbug: Connected device: input2 (bma250 at unknown)
<4>[-----------------------][ 1.056076]
<4>[-----------------------][ 1.056084] [I]<6><><bmm_probe><1174>function entrance
<4>[-----------------------][ 1.056689]
<4>[-----------------------][ 1.056698] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[-----------------------][ 1.061524]
<4>[-----------------------][ 1.061533] [I]<6><><bmm_wakeup><209>wake up result: succeed, tried times: 2
<4>[-----------------------][ 1.062076]
<4>[-----------------------][ 1.062083] [I]<6><><bmm_probe><1198>register dump after waking up
<7>[-----------------------][ 1.062641] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.062653]
<7>[-----------------------][ 1.071508] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.071519] 00 00 00 ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.071531] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.071541] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.071553]
<4>[-----------------------][ 1.072181]
<4>[-----------------------][ 1.072188] [I]<6><><bmm_check_chip_id><144>read chip id result: 0x32
<4>[-----------------------][ 1.072874]
<4>[-----------------------][ 1.072881] [N]<5><><bmm_probe><1203>Bosch Sensortec Device bmm050 detected
<6>[-----------------------][ 1.073799] input: bmm050 as /devices/virtual/input/input3
<7>[-----------------------][ 1.074198] evbug: Connected device: input3 (bmm050 at unknown)
<7>[-----------------------][ 1.087289] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.087303]
<7>[-----------------------][ 1.096151] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.096163] 00 04 0f ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.096174] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.096184] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.096196]
<4>[-----------------------][ 1.097356]
<4>[-----------------------][ 1.097364] [N]<5><><bmm_probe><1295>sensor bmm050 probed successfully
From CM:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
I/cm ( 113): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
I/cm ( 114): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/cm ( 117): Welcome to Android 4.3 / CyanogenMod-10.2-20131009-UNOFFICIAL-e400
Nobody? Nothing? Why?
fergy said:
Nobody? Nothing? Why?
Click to expand...
Click to collapse
I dont think there are some other devs from l3 who can help u! But u've done a rly good work, yet! So we are pleased to see a first build of cm10/1/2/3 or even 11
The whole l3 comunity will apprecate your work!
All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.
thank you for your progress till now, waiting to see more progress and a bootable cm10.1/2 port !
Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk
cybojenix said:
Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj
hecatae said:
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj
Click to expand...
Click to collapse
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1
cybojenix said:
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1
Click to expand...
Click to collapse
Code:
--------- beginning of /dev/log/main
I/cm ( 116): Welcome to Android 4.1.2 / CyanogenMod-10-20131116-UNOFFICIAL-e400
I/cm ( 117): _
I/cm ( 118): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 119): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 120): )) _))
I/cm ( 121):
I/DEBUG ( 126): debuggerd: Nov 16 2013 15:02:12
and??
Post more
cr3pt said:
and??
Post more
Click to expand...
Click to collapse
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C
DeathArrow said:
All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.
Click to expand...
Click to collapse
OK, let's make this transparent.
Did You make working Kernel with E600 sources (for working, I mean that Android is booted)?
To answer on that: no.
Why: drivers for E400 touch (and some other things) are not compatible with E600, nor E410, nor anything except E400/E405.
Now when this is clear, can We continue with make it "workable"?
You notice that I say "workable" instead "bootable" as don't need any introduction 'how-to'.... instead of that, was ask (and was asked) if anybody want to work on this. Apreciate Your knowledge, but wasn't see that anyone is interesting on this 'bump-up'.
Anyway, I am not here to discuss about 'how to' make something (there are lot's of forums about help) but to help to someone and get help if needed regarding specific thing, so can We cooperate on project or not?
hecatae said:
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C
Click to expand...
Click to collapse
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.
fergy said:
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.
Click to expand...
Click to collapse
hi fergy,
do you want a source, or a kernel, or a boot.img or?

[Q] Random power offs

Hi, I have xperia zl and yesterday accidentally magnet touched my zl...screen turned off and after that it powered on and worked but there were some errors in dmesg. Now it is randomly(or not, I think only when it is a bit overloaded) powering off but if I connect it to to pc it is not rebooting but some strange stuff appears in dmesg ( http://pastebin.com/pckHxMZF ). Any suggestions? Thanks
Also i`m using cm11.0
UPD: Connected with adb over network and waited untill it reboots, here are last lines of dmesg
Code:
<3>[ 400.473968] wlan: [4146:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
<3>[ 426.057586] wlan: [4162:E :SME] sme_FTUpdateKey: Unhandled state=0
<3>[ 440.554016] wlan: [4146:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
<6>[ 453.081512] mdm_status_change: unexpected reset external modem id 0
<6>[ 453.086883] mdm_start_ssr: Resetting mdm id 0 due to mdm error
<6>[ 453.092590] subsys-restart: subsystem_restart_dev(): Restart sequence requested for external_modem, restart_level = 3.
<6>[ 453.103515] subsys-restart: subsystem_shutdown(): [e9fc3480]: Shutting down external_modem
And looks like my wlan0 mac address changed
Found something here - http://forum.xda-developers.com/xperia-z/help/xperia-zbricked-wi-fi-t2409804/page3
It is wifi related, maybe that`s why my mac changed
Now this is dmesg before shutting down:
Code:
<4>[ 229.088745] CPU1 didn't collape within 1ms
<4>[ 229.092071] Modules linked in: wlan(C)
<4>[ 229.096557] [<c010c470>] (unwind_backtrace+0x0/0x11c) from [<c017d1ac>] (warn_slowpath_common+0x4c/0x64)
<4>[ 229.105804] [<c017d1ac>] (warn_slowpath_common+0x4c/0x64) from [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 229.116027] [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4)
<4>[ 229.126922] [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4) from [<c011e8dc>] (platform_cpu_kill+0x20/0x30)
<4>[ 229.136749] [<c011e8dc>] (platform_cpu_kill+0x20/0x30) from [<c010b214>] (__cpu_die+0x4c/0x78)
<4>[ 229.145019] [<c010b214>] (__cpu_die+0x4c/0x78) from [<c08a2e24>] (_cpu_down+0x118/0x214)
<4>[ 229.152648] [<c08a2e24>] (_cpu_down+0x118/0x214) from [<c08a2f44>] (cpu_down+0x24/0x40)
<4>[ 229.160644] [<c08a2f44>] (cpu_down+0x24/0x40) from [<c08a46b4>] (store_online+0x2c/0x78)
<4>[ 229.168914] [<c08a46b4>] (store_online+0x2c/0x78) from [<c049fa78>] (dev_attr_store+0x18/0x24)
<4>[ 229.177307] [<c049fa78>] (dev_attr_store+0x18/0x24) from [<c028a3f4>] (sysfs_write_file+0x100/0x148)
<4>[ 229.186981] [<c028a3f4>] (sysfs_write_file+0x100/0x148) from [<c023a0f8>] (vfs_write+0xa8/0x180)
<4>[ 229.195220] [<c023a0f8>] (vfs_write+0xa8/0x180) from [<c023a3e8>] (sys_write+0x34/0x68)
<4>[ 229.203155] [<c023a3e8>] (sys_write+0x34/0x68) from [<c0106120>] (ret_fast_syscall+0x0/0x30)
<4>[ 229.212249] ---[ end trace da227214a82491c7 ]---
<4>[ 237.840850] ------------[ cut here ]------------
<4>[ 237.844879] WARNING: at ../../../../../../kernel/sony/apq8064/arch/arm/mach-msm/pm-8x60.c:995 msm_pm_wait_cpu_shutdown+0xa8/0xc4()
<4>[ 237.857116] CPU1 didn't collape within 1ms
<4>[ 237.860595] Modules linked in: wlan(C)
<4>[ 237.864349] [<c010c470>] (unwind_backtrace+0x0/0x11c) from [<c017d1ac>] (warn_slowpath_common+0x4c/0x64)
<4>[ 237.873840] [<c017d1ac>] (warn_slowpath_common+0x4c/0x64) from [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 237.883880] [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4)
<4>[ 237.893402] [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4) from [<c011e8dc>] (platform_cpu_kill+0x20/0x30)
<4>[ 237.906341] [<c011e8dc>] (platform_cpu_kill+0x20/0x30) from [<c010b214>] (__cpu_die+0x4c/0x78)
<4>[ 237.914611] [<c010b214>] (__cpu_die+0x4c/0x78) from [<c08a2e24>] (_cpu_down+0x118/0x214)
<4>[ 237.922973] [<c08a2e24>] (_cpu_down+0x118/0x214) from [<c08a2f44>] (cpu_down+0x24/0x40)
<4>[ 237.930145] [<c08a2f44>] (cpu_down+0x24/0x40) from [<c08a46b4>] (store_online+0x2c/0x78)
<4>[ 237.938812] [<c08a46b4>] (store_online+0x2c/0x78) from [<c049fa78>] (dev_attr_store+0x18/0x24)
<4>[ 237.946838] [<c049fa78>] (dev_attr_store+0x18/0x24) from [<c028a3f4>] (sysfs_write_file+0x100/0x148)
<4>[ 237.956481] [<c028a3f4>] (sysfs_write_file+0x100/0x148) from [<c023a0f8>] (vfs_write+0xa8/0x180)
<4>[ 237.964721] [<c023a0f8>] (vfs_write+0xa8/0x180) from [<c023a3e8>] (sys_write+0x34/0x68)
<4>[ 237.972595] [<c023a3e8>] (sys_write+0x34/0x68) from [<c0106120>] (ret_fast_syscall+0x0/0x30)
<4>[ 237.982147] ---[ end trace da227214a82491c8 ]---
<3>[ 245.350189] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 245.356719] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 245.362152] afe_send_hw_delay: config cmd failed
<6>[ 250.620727] SLIM_CL: skip reconfig sequence
<3>[ 250.700622] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 250.707305] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 250.712829] afe_send_hw_delay: config cmd failed
<6>[ 254.915313] SLIM_CL: skip reconfig sequence
<3>[ 258.102020] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 258.109100] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 258.114227] afe_send_hw_delay: config cmd failed
<6>[ 275.903686] msm_vidc_dec: Inside vid_dec_open()
<4>[ 275.907257]
<4>[ 275.907257] res_trk_download_firmware(): Request firmware download
<4>[ 275.949737]
<4>[ 275.949737] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
<3>[ 275.965454] Rate 266670000 for vcodec_clk is greater than highest Fmax
<6>[ 275.984374] fw_version 8:30:2013
<4>[ 276.108154]
<4>[ 276.108154] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
<6>[ 276.118316] WARNING: H264MaxLevelExceeded : 51
<6>[ 276.121643] profile 4 level 0 progressive 1
<4>[ 276.125823]
<4>[ 276.125854] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
<4>[ 276.135559]
<4>[ 276.135589] VIDC: vidc_freq = 200000000, req_perf_lvl = 187680, set_perf_lvl = 244800
Do your have any installs or changes last time?
If yes - first method it is facotury defaults, or backup. Maybe you can only remove last installs..
Second - it hardware problem... power controller, maybe, or usb block
freask5 said:
Do your have any installs or changes last time?
If yes - first method it is facotury defaults, or backup. Maybe you can only remove last installs..
Second - it hardware problem... power controller, maybe, or usb block
Click to expand...
Click to collapse
Replacing battery helped
suleymanovemil8 said:
Replacing battery helped
Click to expand...
Click to collapse
Great)) Congratulations))

[Q] [N7105] bootloops / random restarts, worse with SIM inserted?

Hi,
when I started using my Note 2 LTE with an LTE sim card (tested LTE long ago without problems), running CM11 nightly from approx. 1 month ago, it started to reboot randomly. But it also happened with the other sim card without LTE, that worked fine before.
Updating CM didn't change anything.
Then I flashed the newest DBT stock ROM for the N7105 (N7105XXUFNE3_N7105DBTFNE1_DBT) (without knowing about the KNOX bootloader...). The behavior was the same with any of the SIM's inserted, but without SIM, it took hours compared to minutes or seconds for it to reboot.
Then I tried to flash the N7105XXDMB2-XEF-Service-Firmware (at this moment, I remember it was warranty void 0 and showed sw rev invalid magic string, EDIT2: perhaps did'nt want to downgrade the bootloader to a non knox version? but without also flashing bootloader it now doesn't flash, trying another old 4.3 formware which is without bootloader perhaps, but didn't work, can I remove it somewhere and how?... /EDIT2) with separated CSC, Bootloader, PDA, Modem and PIT. I also ticked repartiton.
Here the log output:
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FULL_MODEM_N7105XXDMB2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FULL_CSC_N7105XXDMB2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping.."
It said "set partition" in the box where "PASS" also appears for more than 10 hours, then I unplugged it.
After unplugging:
"<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!"
It didn't change anything, but when making a factory reset it even rebooted instantly.
I also flashed the pit file with repartition alone. but same behavior.
But after all of this, it was repartitioned.
I successfully flashed philz touch cwm, didn't change anything.
Now I flashed the newest DBT (N7105XXUFNE3_N7105DBTFNE1_DBT) again. No restart without SIM, but didn't test it for hours. With SIM, instant restart after entering PIN. And what's really strange... now it has an instant bootloop without SIM, too. Factory reset made it boot successfully again.
Is something wrong with my radio unit or what else could I try?
EDIT2:
I now flashed philz recovery to gain root access, made that in the recovery, then I installed adbd Insecure v2.00 to have root adb when booting up. Without Sim card it was again fine for a long time and then i put my sim card in and logged proc/kmsg and logcat to files on my device via an adb command.
Here they are, I really hope some can have a look at it and perhaps find anything that helps!
pastebin.com/drMnTDgr
en.file-upload.net/download-9867498/logcat.txt.html (was too big for pastebin)
/EDIT
EDIT3:
Here's the last_kmsg log from the same crash:
pastebin.com/pYJK0CPG
From another crash: pastebin.com/q7fj4byt
And the 3rd crash: pastebin.com/AV7RPquK
/EDIT
EDIT4:
I managed to get kernel logs even after adb disconnects! There's also one last_kmsg now that shows some logs before the restart, that looks promising!
See the answer below: http://forum.xda-developers.com/showpost.php?p=57088630&postcount=7
/EDIT
Any help is much appreciated!
Thanks in advance.
fightcookie
Insert your sim in another phone and remove sim pin lock.
Then insert the unlocked sim in your lte phone and see if it bootloops.
If it boots successfully clear the Sim app data and cache.
Reboot and see if your problem is solved and if you got lucky.
Ravi.
-----------------------------
If you liked my post, please hit the thanks / thumbs up button.
Hi,
ok I'll try that, but what do you mean by clearing the SIM app data and cache and how do I do that?
And I'm interested in why this could help (even though it crashed without SIM sometimes) and what the problem could have been then, could you tell me your thoughts on this?
fightcookie
fightcookie said:
Hi,
ok I'll try that, but what do you mean by clearing the SIM app data and cache and how do I do that?
And I'm interested in why this could help (even though it crashed without SIM sometimes) and what the problem could have been then, could you tell me your thoughts on this?
fightcookie
Click to expand...
Click to collapse
I don't have a solid reason to support what I said, but from self experience I found out the PIN-locked SIMs generally pose problems at the first time of boot.
Earlier SIMs were 32k and now they come with 64k memory. Previously there was no Android but only Nokia, Siemens, Ericsson, etc which designed both hardware & the software which resulted in both being compatible.
Now to avoid SIM-duplication, mobile companies encrypt the data in it which may give problems when the phone is initializing (since it is a very basic mode the phone is operating in).
All the above combinations do mess up SIM reading capabilities of the phone when software is constantly, something may break.
So, I asked you for the above.
Regarding clearing SIM app menu, you should find it with the name "STK" of with the name of your Mobile Carrier under Apps. You need to clear the cache and data of this app. See "Vodafone Services" app in screenshot.
Thanks for your explanation. But it first rebooted while the new LTE sim was already in it and working for some time..
Do you mean that the software now has a problem with the card even though it worked before or that the software had a problem with the card and modified the card somehow? Just trying to understand this phenomenon .
On a stock rom I can't find such an app. So do I need to flash a Telekom branded ROM to do this (my SIM is from congstar, which is a daughter of Telekom and uses their cell towers)? Right now I have my phone available, which I could flash some other firmware on, and a very basic relatively new Nokia phone. Later I could put the SIM in another android phone, but it would be good not needing to flash another ROM on that.
What are these data containing that should be cleared?
When the problem occured I used Cyanogenmod, which doesn't have such an app, so I also didn't do any settings in such an app, even though the problem then occured. Could it be that you mean some settings one has done in the app could prevent another SIM from initializing correctly, but isn't it also OK if I wiped my whole phone and flashed a clean ROM or did I misunderstand you?
Just want you to remove the Sim Pin lock using another phone and then retest. Thats all. Forget the sim application if you cannot see it.
Just have a hunch that your Sim is probably going corrupt which may need to be replaced by your cellular service provider.
Also if possible check the sim in another phone and see if it is working.
Ravi.
-----------------------------
If you liked my post, please hit the thanks / thumbs up button.
I removed the PIN with another phone, but it keeps crashing with that SIM and without SIM at all, too
I also tested the SIM in another phone, calling and SMS works, data still has to be tested in a smartphone.
I also wiped the EFS partition and restored an EFS backup. Wiped modem, too. Flashed the newest ROM (no matter which country), which is from Singapore (N7105XXUFNJ1_N7105OLBFNJ1_MM1, but has the same N7105XXUFND3 modem), but didn't change anything.
Flashed back newest DBT ROM (N7105XXUFNE3_N7105DBTFNE1_DBT) and Philz recovery.
I now managed to get a kernel log and logcat till after the adb connection is interrupted! (see here for how to do it: stackoverflow.com/questions/6071547/shutdown-log-in-android/27111185#27111185).
Of course the command stopped somewhere in the shutdown process, so they are indeed cut off in the middle of the line.
Normal reboot :
kmsg: nopaste.info/3e7eebd751.html
logcat: en.file-upload.net/download-9912275/logcat243_normalreboot-till-after-adb-disconnect.txt.html
last_kmsg: pastebin.com/GjkHkLAk
crash:
kmsg: nopaste.info/14cef13cdf.html
logcat: en.file-upload.net/download-9912298/logcat2416-till-after-adb-disconnect.txt.html
I wanted to get the last_kmsg from that crash but after the crash, it had a bootloop, which could only be fixed with wiping cache. Sometimes only a new flash via Odin helped then..
This is the last_kmsg after these bootloops, in contrast to my previous last_kmsg's it contains logs before the kernel restart, which could really be helpful!!! (didn't seem like a crash / panic / ooops in all the logs): pastebin.com/ikqkmeCh
Here is it at least the end and hopefully more important part in text form for people to better find this thread:
Code:
THIS IS JUST THE END OF THE LOG, SEE pastebin.com/ikqkmeCh FOR FULL LOG!
<5>[ 751.561032] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 751.563851] c0 [TSP] DVFS On![8]
<6>[ 751.565224] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 751.601427] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 751.700104] c0 [TSP] DVFS Off!
<5>[ 753.402448] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 753.405280] c0 [TSP] DVFS On![8]
<6>[ 753.406448] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 753.463122] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 753.560060] c0 [TSP] DVFS Off!
<5>[ 754.623197] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 754.626090] c0 [TSP] DVFS On![8]
<6>[ 754.630485] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 754.683798] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 754.780043] c0 [TSP] DVFS Off!
<5>[ 754.826587] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 754.827607] c0 [TSP] DVFS On![8]
<6>[ 754.829123] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 754.897544] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 754.995053] c0 [TSP] DVFS Off!
<5>[ 755.019269] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 755.019305] c0 [TSP] DVFS On![8]
<6>[ 755.020677] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 755.069836] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 755.165044] c0 [TSP] DVFS Off!
<5>[ 755.640533] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 755.643228] c0 [TSP] DVFS On![8]
<6>[ 755.644406] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 755.710981] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 755.810050] c0 [TSP] DVFS Off!
<5>[ 757.614478] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 757.617332] c0 [TSP] DVFS On![8]
<6>[ 757.618582] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 757.685053] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 757.785060] c0 [TSP] DVFS Off!
<5>[ 758.316662] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 758.319436] c0 [TSP] DVFS On![8]
<6>[ 758.320793] c0 [VIB] haptic_work: pwm_config duty=27787
<5>[ 758.366310] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 758.465066] c0 [TSP] DVFS Off!
<5>[ 758.947063] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 758.949869] c0 [TSP] DVFS On![8]
<6>[ 758.951011] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 758.977241] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 759.075033] c0 [TSP] DVFS Off!
<5>[ 759.700331] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 759.703134] c0 [TSP] DVFS On![8]
<6>[ 759.704083] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 759.770393] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 759.870023] c0 [TSP] DVFS Off!
<5>[ 759.882612] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 759.882639] c0 [TSP] DVFS On![8]
<6>[ 759.886853] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 759.933601] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 760.030030] c0 [TSP] DVFS Off!
<5>[ 760.045362] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 760.046911] c0 [VIB] haptic_work: pwm_config duty=27787
<6>[ 760.049250] c0 [TSP] DVFS On![8]
<6>[ 760.071878] c0 max77693_get_online_type
<6>[ 760.074191] c0 max77693_get_online_type: online(0x00030000)
<6>[ 760.074215] c0 battery_get_cable: main(3), sub(0), pwr(0)
<6>[ 760.081438] c0 max17047_get_soc: SOC(35, 3432 / 9722)
<6>[ 760.083948] c0 [34] bat: s(35, 0), v(3888, 110), t(26.5), cs(1, 1), cb(3), cr(466, 460), t(732)
<6>[ 760.084543] c0 healthd: battery l=35 v=3888 t=26.5 h=2 st=2 c=0 chg=u
<5>[ 760.096399] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 760.195057] c0 [TSP] DVFS Off!
<5>[ 760.686347] c0 melfas-ts 3-0048: P(M)(60) [ 0]
<6>[ 760.689055] c0 [TSP] DVFS On![8]
<6>[ 760.691068] c3 [VIB] haptic_work: pwm_config duty=27787
<5>[ 760.695347] c0 melfas-ts 3-0048: R(M)(60) [ 0]
<6>[ 760.795030] c0 [TSP] DVFS Off!
<6>[ 760.829749] c3 EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts:
<7>[ 760.829792] c3 SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<3>[ 761.876694] c0 init: no such service 'fuse_sdcard1'
<4>[ 762.878890] c0 [EXFAT] trying to unmount...
<4>[ 762.879436] c0 [EXFAT] unmounted successfully
<6>[ 762.947933] c0 SysRq : Emergency Remount R/O
<6>[ 762.978158] c0 EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
<4>[ 762.979360] c0 Emergency Remount complete
<6>[ 763.049409] c0 notify_modem_fatal or shutdown
<7>[ 763.089195] c0 usb usb1: usb wakeup-resume
<7>[ 763.089340] c0 usb usb1: usb auto-resume
<7>[ 763.089457] c0 s5p-ehci s5p-ehci: resume root hub
<7>[ 763.115176] c0 hub 1-0:1.0: hub_resume
<7>[ 763.115383] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 763.115596] c0 hub 1-0:1.0: port 2: status 0501 change 0001
<7>[ 763.220274] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 763.220543] c0 hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
<7>[ 763.275214] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 763.275377] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 763.330228] c0 usb 1-2: new high speed USB device number 2 using s5p-ehci
<7>[ 763.336612] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 763.336773] c0 s5p-ehci s5p-ehci: devpath 2 ep0in 3strikes
<7>[ 763.341106] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 763.341267] c0 s5p-ehci s5p-ehci: devpath 2 ep0in 3strikes
<7>[ 763.345608] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 763.345765] c0 s5p-ehci s5p-ehci: devpath 2 ep0in 3strikes
<7>[ 763.400211] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 763.400368] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<3>[ 763.455216] c0 usb 1-2: device descriptor read/64, error -71
<7>[ 763.615212] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 763.615370] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 763.674358] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 763.674520] c0 s5p-ehci s5p-ehci: devpath 2 ep0out 3strikes
<7>[ 763.879357] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 763.879514] c0 s5p-ehci s5p-ehci: devpath 2 ep0out 3strikes
<3>[ 764.080188] c0 usb 1-2: device not accepting address 2, error -71
<7>[ 764.135211] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 764.135370] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 764.190221] c0 usb 1-2: new high speed USB device number 3 using s5p-ehci
<7>[ 764.245211] c0 s5p-ehci s5p-ehci: port 2 high speed
<7>[ 764.245372] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 764.304357] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 764.304519] c0 s5p-ehci s5p-ehci: devpath 2 ep0out 3strikes
<7>[ 764.509356] c0 s5p-ehci s5p-ehci: detected XactErr len 0/8 retry 32
<7>[ 764.509518] c0 s5p-ehci s5p-ehci: devpath 2 ep0out 3strikes
<0>[ 764.550151] c0 (sec_debug_set_upload_magic) 0
<6>[ 764.554046] c0 REBOOT Notifier for CPUFREQ
<6>[ 764.555479] c0 REBOOT Notifier for BUSFREQ
<6>[ 764.555591] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.555651] c0 dummy 2-0057: shutdown -
<6>[ 764.555730] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.555820] c0 s5p-ohci s5p-ohci: shutdown -
<6>[ 764.555877] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.556565] c0 s5p-ehci s5p-ehci: shutdown -
<6>[ 764.557071] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557128] c0 pn65n 12-002b: shutdown -
<6>[ 764.557171] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557230] c0 s5p_ddc 5-003a: shutdown -
<6>[ 764.557276] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557341] c0 sii9234_cbus 15-0064: shutdown -
<6>[ 764.557388] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557454] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[ 764.557503] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557565] c0 sii9234_tpi 15-003d: shutdown -
<6>[ 764.557616] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557680] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[ 764.557890] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.557947] c0 i2c 5-0009: shutdown -
<6>[ 764.557986] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.558041] c0 i2c i2c-5: shutdown -
<6>[ 764.558082] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.558153] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[ 764.630293] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[ 764.630343] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[ 764.630397] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[ 764.680052] c0 max77686-rtc max77686-rtc: shutdown -
<6>[ 764.680145] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680205] c0 dummy 7-0006: shutdown -
<6>[ 764.680249] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680309] c0 max77686 7-0009: shutdown -
<6>[ 764.680351] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680405] c0 i2c i2c-7: shutdown -
<6>[ 764.680446] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680506] c0 wm8994 4-001a: shutdown -
<6>[ 764.680549] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680603] c0 i2c i2c-4: shutdown -
<6>[ 764.680642] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680703] c0 melfas-ts 3-0048: shutdown -
<6>[ 764.680746] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680801] c0 i2c i2c-3: shutdown -
<6>[ 764.680843] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.680906] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[ 764.680952] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681006] c0 i2c i2c-2: shutdown -
<6>[ 764.681044] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681099] c0 i2c i2c-1: shutdown -
<6>[ 764.681142] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681195] c0 i2c i2c-0: shutdown -
<6>[ 764.681232] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681285] c0 i2c i2c-12: shutdown -
<6>[ 764.681323] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681378] c0 ice4 22-006c: shutdown -
<6>[ 764.681417] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681473] c0 i2c i2c-22: shutdown -
<6>[ 764.681513] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681572] c0 an30259a 21-0030: shutdown -
<6>[ 764.681615] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.681672] c0 i2c i2c-21: shutdown -
<6>[ 764.681733] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[ 764.681805] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[ 764.681864] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[ 764.682816] c0 max77693-muic max77693-muic: shutdown -
<6>[ 764.682876] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[ 764.683821] c0 max77693-led max77693-led: shutdown -
<6>[ 764.683875] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.683933] c0 dummy 17-0048: shutdown -
<6>[ 764.683974] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684031] c0 dummy 17-0025: shutdown -
<6>[ 764.684073] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684138] c0 max77693 17-0066: shutdown -
<6>[ 764.684183] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684238] c0 i2c i2c-17: shutdown -
<6>[ 764.684277] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684332] c0 i2c i2c-15: shutdown -
<6>[ 764.684373] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684445] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[ 764.684496] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684552] c0 i2c i2c-14: shutdown -
<6>[ 764.684592] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684659] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[ 764.684711] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[ 764.684768] c0 i2c i2c-8: shutdown -
<6>[ 764.684912] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.684996] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[ 764.685073] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.685820] c0 sdhci_shutdown_host : MMC Card OFF
<6>[ 764.685866] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[ 764.685947] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.686016] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[ 764.686076] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[ 764.686134] c0 mdnie mdnie: shutdown -
<4>[ 764.686291] c0 Disabling non-boot CPUs ...
<5>[ 764.692030] c0 CPU3: shutdown
<0>[ 764.692798] c0 Restarting system.
<0>[ 764.692868] c0 sec_reboot (104, (null))
Samsung S-Boot 4.0 for GT-N7105 (May 16 2014 - 14:44:47)
EXYNOS4412(EVT 2.0) / 2044MB / 0MB / Rev 10 / N7105XXUFNE3 /(PKG_ID 0x702f058)
BOOTLOADER VERSION : N7105XXUFNE3
PMIC rev = PASS2(4)
BUCK1OUT(vdd_mif) = 0x07
BUCK3DVS1(vdd_int) = 0x28
cardtype: 0x00000007
SB_MMC_HS_52MHZ_1_8V_3V_IO
mmc->card_caps: 0x00000311
mmc->host_caps: 0x00000311
[mmc] capacity = 30777344
Current SBOOT version : VERSION_-+A2
- read_bl1
pit_check_signature (PIT) valid.
initialize_ddi_data: usable! (13:0xc)
[RPMB] emmc_rpmb_open:
Get DATA success.
[RPMB] emmc_rpmb_close:
initialize_rpmb_data: usable! (GT-N7105:VERSION_-+A2)
PARAM ENV VERSION: v1.0..
set_charger_current: chg curr(bf), in curr(17)
set_charger_state: buck(1), chg(1), reg(0x05)
microusb_get_attached_device: STATUS1:0x3f, 2:0x41
set_auto_current: ta_state(0), curr(1800)
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(3958) is caculated to t-soc(70.966)
init_fuelgauge: start: vcell(3958), vfocv(3778), soc(34), table soc(70)
init_fuelgauge: finish: vcell(3958), vfocv(3778), soc(34), table soc(70)
init_microusb_ic: before MUIC: CDETCTRL:0x2d
init_microusb_ic: after MUIC: CDETCTRL:0x2d
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3e
init_microusb_ic: MUIC: CONTROL2:0x3e
PMIC_ID = 0x02
PMIC_IRQSRC = 0x00
PMIC_IRQ1 = 0x53
PMIC_IRQ2 = 0x00
PMIC_IRQ1M = 0xff
PMIC_IRQ2M = 0xff
PMIC_STATUS1 = 0x16
PMIC_STATUS2 = 0x00
PMIC_PWRON = 0x09
PMIC_RTCINT = 0x11
PMIC_RTCINTM = 0x3d
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x41
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 0, MAGNA
cmu_div:12, div:1, src_clk:880000000, pixel_clk:67425696
s5p_dsim_display_config: VIDEO MODE
41, 16, 26,
<start_checksum:448>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:450>offset:50, size:6296
<start_checksum:454>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
[mobi_drv] add: 0x43e51e90, size: 3933
MobiCore INIT response = 0
MobiCore RTM has initialized!
MobiCore IDLE flag = 0
MobiCore driver address 43e51e90, size = 3933
MobiCore RTM Notified back!
MobiCore Driver loaded and RTM IDLE!
MobiCore RTM has been uninitialized!
load_kernel: loading boot image from 106496..
pit_check_signature (BOOT) valid.
No need to update kernel type.
SMC Num = 0x83000001
mobismc success!!! [ret = 0]
[s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A2, rpmb_version:VERSION_-+A2
rpmb_version:50, cur_version:50
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1FC00000 A0000000
ATAG_SERIAL: 4 54410006 42f7f306 8ff29f23
ATAG_INITRD2: 4 54420005 42000000 16a128
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: a9 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c [email protected] [email protected] [email protected] s3cfb.bootloaderfb=0x5ec00000 lcdtype=0 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=fcef9ac91b9dc17b060b95a25524e218 connie=GT-N7105_LTE_OPE_3518497511139278a20bfdc620d2aad5 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N7105XXUFNE3 androidboot.selinux=enforcing androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=42f7f3068ff29f23 snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0
Starting kernel at 0x40008000...
SWITCH_SEL(3)
fightcookie
Sorry man
Don't know about logcats and I am a newbie in that area.
If your sim is ok then well, I don't know where your phone is failing.
Could be a bad battery but that would freeze the phone or lose power and thats not the case.
Just see if you have not undervolted your cpu and are using the proper governor.
You have cleared the dalvik, cache too right. If not then try that.
Yes make sure you are using the latest updates and be sure to check out the known bugs list of the rom you are installing. But thats pretty basic stuff which you may already be knowing about.
Good luck then.
Ravi.
Ravi.
-----------------------------
If you liked my post, please hit the thanks / thumbs up button.
Ok, thanks for the help anyways!!
It doesn't freeze, but sometimes, not always, it just went off and stayed off. But the restarts then would have to be instantiated because of the battery.. any way to check this?
No, I am using stock kernel and governor settings from the Samsung stock rom and kernel now, that should work, if these are shipped with the devices or as official updates.
I already wiped dalvik numerous times, always when I flashed another ROM.
I tried the latest stock rom, cyanogenmod, philz recovery (or stock Samsung) and latest stock or devil kernel.
fightcookie
As of now, it could be helpful to try swapping the battery with a good known one if you are getting restarts. That's all from my side.
Ravi.
-----------------------------
If you liked my post, please hit the thanks / thumbs up button.
Sure ok, I'll try to find another battery I can test it with and will report back, if it changed anything or not.
Sooooo, it's pretty late but for anyone facing the same problem:
I switched the battery and everything was working. I also got another log where it said something like no battery and shutting down, the same as when removing the battery while the phone is powered on.
fightcookie

remove it

<6>[ 2.173714] [0: recovery: 2120] [c0] dsim_panel_set_brightness : panel is not active state..
<6>[ 2.173718] [0: recovery: 2120] [c0] LCD is off
<6>[ 2.173790] [0: recovery: 2120] [c0] decon_blank ++ blank_mode : 0
<6>[ 2.173795] [0: recovery: 2120] [c0] decon-int UNBLANK mode: 0type (0: DSI)
<6>[ 2.173799] [0: recovery: 2120] [c0] decon_enable: 0
<6>[ 2.173918] [0: recovery: 2120] [c0] decon_int_set_clocks +
<6>[ 2.174016] [0: recovery: 2120] [c0] dout_sclk_decon_int_vclk: 37 Mhz
<6>[ 2.174021] [0: recovery: 2120] [c0] dout_sclk_decon_int_eclk: 45 Mhz
<6>[ 2.174025] [0: recovery: 2120] [c0] decon_int_set_clocks -
<4>[ 2.174051] [0: recovery: 2120] [c0] decon 14830000.decon_fb: pm_stay_awake
<6>[ 2.185655] [0: recovery: 2120] dsim_reset_panel is not exist, so create it
<6>[ 2.185663] [0: recovery: 2120] [c0] dsim_reset_panel is empty, so make list
<6>[ 2.185722] [0: recovery: 2120] [c0] check_dt: gpio: 3, regulator: 0, delay: 8, pinctrl: 0
<6>[ 2.250127] [0: recovery: 2120] [c0] MDD : s6e88a0_init was called : s6e88a0
<4>[ 2.259865] [3: migration/3: 23] [c3] IRQ141 no longer affine to CPU3
<5>[ 2.260408] [0: thread_hotplug: 1417] [c0] CPU3: shutdown
<6>[ 2.403659] [0: recovery: 2120] [c0] MDD : s6e88a0_displayon was called
<6>[ 2.416757] [0: recovery: 2120] [c0] dsim_panel_set_brightness : platform : 255, : mapping : 350, real : 350, index : 61
<6>[ 2.416833] [0: recovery: 2120] [c0] acl: 0, auto_brightness: 0
<6>[ 2.416859] [0: recovery: 2120] [c0] temperature: 25, tset: 25
<6>[ 2.416899] [0: recovery: 2120] [c0] decon_blank -- blank_mode : 0
<6>[ 2.416928] [0: recovery: 2120] [c0] dsim_panel_set_brightness : platform : 255, : mapping : 350, real : 350, index : 61
<6>[ 2.416932] [0: recovery: 2120] [c0] LCD is on
<4>[ 2.418225] [2: migration/2: 18] [c2] IRQ140 no longer affine to CPU2
<5>[ 2.418716] [0: thread_hotplug: 1417] [c0] CPU2: shutdown
<4>[ 2.420265] [1: migration/1: 13] [c1] IRQ139 no longer affine to CPU1
<5>[ 2.420736] [0: thread_hotplug: 1417] [c0] CPU1: shutdown
<6>[ 2.450559] [0: recovery: 2120] [c0] dsim_panel_set_brightness : platform : 255, : mapping : 350, real : 350, index : 61
<6>[ 2.500814] [0: recovery: 2120] [c0] bt532_ts[bt532_ts_open : 2196] invalid work proceedure (0)
<6>[ 2.513074] [0: recovery: 2120] [c0] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
<7>[ 2.513120] [0: recovery: 2120] [c0] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
<6>[ 2.525606] [0: recovery: 2120] [c0] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[ 2.525647] [0: recovery: 2120] [c0] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<4>[ 2.535067] [1: swapper/1: 0] [c1] CPU1: Booted secondary processor
<4>[ 2.537050] [2: swapper/2: 0] [c2] CPU2: Booted secondary processor
<4>[ 2.538998] [3: swapper/3: 0] [c3] CPU3: Booted secondary processor
<6>[ 2.553284] [1: recovery: 2120] [c1] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[ 2.553325] [1: recovery: 2120] [c1] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[ 2.577986] [1: recovery: 2120] [c1] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
<7>[ 2.578028] [1: recovery: 2120] [c1] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
<6>[ 2.610998] [1: recovery: 2120] [c1] FAT-fs (mmcblk1p1[179:33]): trying to mount...
<4>[ 2.616149] [1: recovery: 2120] [c1] FAT-fs (mmcblk1p1[179:33]): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 2.616164] [1: recovery: 2120] [c1] FAT-fs (mmcblk1p1[179:33]): mounted successfully!
<7>[ 2.616219] [1: recovery: 2120] [c1] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
<6>[ 2.683872] [1: recovery: 2120] [c1] FAT-fs (mmcblk1p1[179:33]): trying to unmount...
<6>[ 2.683908] [1: recovery: 2120] [c1] FAT-fs (mmcblk1p1[179:33]): unmounted successfully!
<6>[ 3.668672] [2: recovery: 2120] [c2] FAT-fs (mmcblk1p1[179:33]): trying to mount...
<4>[ 3.674417] [2: recovery: 2120] [c2] FAT-fs (mmcblk1p1[179:33]): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 3.674433] [2: recovery: 2120] [c2] FAT-fs (mmcblk1p1[179:33]): mounted successfully!
<7>[ 3.674467] [2: recovery: 2120] [c2] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
<6>[ 3.717971] [2: recovery: 2120] [c2] dsim_panel_set_brightness : platform : 255, : mapping : 350, real : 350, index : 61
<7>[ 3.723103] [3: init: 1] [c3] usb: enable_store enabled=0, !dev->enabled=0
<7>[ 3.723621] [3: init: 1] [c3] usb: enable_store enabled=0, !dev->enabled=1
<3>[ 3.723643] [3: init: 1] [c3] android_usb: already disabled
<7>[ 3.723724] [3: init: 1] [c3] usb: functions_store buff=mtp,adb
<7>[ 3.723744] [3: init: 1] [c3] usb: android_enable_function name=mtp
<7>[ 3.723757] [3: init: 1] [c3] usb: android_enable_function name=acm
<7>[ 3.723768] [3: init: 1] [c3] usb: android_enable_function name=adb
<7>[ 3.723831] [3: init: 1] [c3] usb: enable_store enabled=1, !dev->enabled=1
<7>[ 3.723843] [3: init: 1] [c3] usb: enable_store f:mtp
<7>[ 3.723853] [3: init: 1] [c3] usb: enable_store f:acm
<7>[ 3.723862] [3: init: 1] [c3] usb: acm is enabled. (bcdDevice=0x400)
<7>[ 3.723872] [3: init: 1] [c3] usb: enable_store f:adb
<7>[ 3.723886] [3: init: 1] [c3] usb: enable_store vendor=18d1,product=4ee2,bcdDevice=400
<7>[ 3.723895] [3: init: 1] ,Class=0,SubClass=0,Protocol=0
<7>[ 3.723905] [3: init: 1] [c3] usb: enable_store next cmd : usb_add_config
<6>[ 3.727714] [3: adbd: 2150] [c3] adb_open
<7>[ 3.727743] [3: adbd: 2150] [c3] usb: android_bind_enabled_functions f:mtp
<6>[ 3.727753] [3: adbd: 2150] [c3] mtp_bind_config
<7>[ 3.727790] [3: adbd: 2150] [c3] usb: android_bind_enabled_functions f:acm
<6>[ 3.727811] [3: adbd: 2150] [c3] DUN is registerd
<7>[ 3.727822] [3: adbd: 2150] [c3] usb: android_bind_enabled_functions f:adb
<6>[ 3.727831] [3: adbd: 2150] [c3] adb_bind_config
<6>[ 3.735724] [0: recovery: 2120] [c0] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
<7>[ 3.735766] [0: recovery: 2120] [c0] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
<6>[ 4.525455] [3: recovery: 2149] [c3] mtp_open
<4>[ 10.478648] [1: hwrng: 887] [c1] hwrng: no data available
<6>[ 10.478658] [0: kworker/0:2: 1132] [c0] muic_print_reg_log:e(0)0 13(1)0 14(0)0 15(0)0 1b(0)0 1d(3)0 20(4)0 21(0)0 24(4)0 3a(0)0 2(1f)0 2(1e)1 2(1e)0 2(1e)0 3(0)0 4(0)0 a(4)0 b(0)0 15(0)0 1d(3)0 7(1f)0 13(1)0 13(25)1 13(25)0 13(25)0
<6>[ 10.480689] [0: kworker/0:2: 1132] [c0] muic_print_reg_dump:CT:1e IM1:dc IM2:0 MS1:25 MS2:0 ADC:1f DT1:4 DT2:0 DT3:0 RS1:3
<6>[ 11.278585] [0: kworker/0:2: 1132] [c0] usb_notify: reserve_state_check booting delay finished
<6>[ 11.278599] [0: kworker/0:2: 1132] [c0] usb_notify: reserve_state_check event=vbus(1) enable=1
<6>[ 11.278611] [0: kworker/0:2: 1132] [c0] usb_notify: otg_notifier_callback event=vbus(1)
<6>[ 11.278694] [1: kworker/u8:2: 1130] [c1] usb_notify: otg_notify_state+ event=vbus(1), enable=on
<6>[ 11.278711] [1: kworker/u8:2: 1130] [c1] usb_notifier: exynos_set_peripheral usb attached
<6>[ 11.278723] [1: kworker/u8:2: 1130] [c1] usb_notifier: check_usb_vbus_state vbus state = 1
<6>[ 11.279030] [1: kworker/u8:2: 1130] [c1] usb_notifier: check_usb_vbus_state: get the 13580000.usb platform_device
<7>[ 11.279043] [1: kworker/u8:2: 1130] [c1] usb: s3c_vbus_enable is_active=1(udc_enable)
<7>[ 11.279784] [1: kworker/u8:2: 1130] [c1] samsung-dwc-usb2phy 135c0000.usb2phy: end of samsung_dwc_usb2phy_init
<6>[ 11.280824] [1: kworker/u8:2: 1130] [c1] usb_notify: otg_notify_state- event=vbus, cable=vbus
<6>[ 11.365118] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: sm5703_get_ocv: read = 0x45f, ocv = 4371
<6>[ 11.373232] [0: kworker/0:2: 1132] [c0] sm5703_test_read: 0x4 = 0xbe, 0x5 = 0xff, 0x6 = 0xf3, 0x7 = 0xff, 0x8 = 0x00, 0x9 = 0x08, 0xa = 0x03, 0xb = 0x00, 0xc = 0x55, 0xd = 0x07, 0xe = 0x03, 0xf = 0x07, 0x10 = 0x1c, 0x11 = 0x10, 0x12 = 0x7a, 0x13 = 0x08, 0x60 = 0x03, 0x6b = 0x20, 0x66 = 0x00,
<6>[ 11.374157] [0: kworker/0:2: 1132] [c0] sec-battery battery.31: sec_bat_get_temperature_by_adc: Temp(231), Temp-ADC(2141)
<6>[ 11.374889] [0: kworker/0:2: 1132] [c0] sec-battery battery.31: sec_bat_get_temperature_by_adc: Temp(231), Temp-ADC(2140)
<6>[ 11.374907] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: fg_vbatocv_check: iocv_error_count (0)
<6>[ 11.374927] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: fg_vbatocv_check: mode change to mix RS auto mode
<6>[ 11.377834] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: sm5703_get_temperature: read = 0x1a40, temperature = 262
<6>[ 11.378617] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: sm5703_get_ocv: read = 0x45f, ocv = 4371
<6>[ 11.378637] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: sm5703_get_soc: fg_get_soc : temp_std = 25, temperature = 262, temp_offset = 10, temp_offset_cal = 0x1, curr_cal = 0x7500
<6>[ 11.380014] [0: kworker/0:2: 1132] [c0] sm5703-fuelgauge 7-0071: sm5703_get_soc: read = 0x640c, soc = 1000
<6>[ 11.383082] [0: kworker/0:2: 1132] [c0] 0xAC=0x204d, 0xAD=0x211a, 0xAE=0x22e7, 0xAF=0x2400
<6>[ 11.386152] [0: kworker/0:2: 1132] [c0] 0xBC=0x204d, 0xBD=0x211a, 0xBE=0x22e7, 0xBF=0x2400
<6>[ 11.389228] [0: kworker/0:2: 1132] [c0] 0xCC=0x0b33, 0xCD=0x0ccc, 0xCE=0x1000, 0xCF=0x1028
<6>[ 11.392297] [0: kworker/0:2: 1132] [c0] 0x85=0x00db, 0x86=0x0017, 0x87=0x2006, 0x28=0x0944
<6>[ 11.392317] [0: kworker/0:2: 1132] [c0] sec-battery battery.31: sec_bat_get_battery_info:Vnow(4410mV),Inow(101mA),Imax(450mA),SOC(100%),Tbat(231),Tchg(0),is_hc_usb(0)
<4>[ 11.423860] I[0: swapper/0: 0] [c0] usb: Reset interrupt - (GOTGCTL):0xd0000
<6>[ 11.443611] [0: kworker/0:2: 1132] [c0] sec-battery battery.31: sec_bat_battery_cable_check: Battery Connected
<6>[ 11.443848] [0: kworker/0:2: 1132] [c0] sm5703_get_charging_health : charger->is_charging = 1, charger->cable_type = 4, charger->aicl_state = 0
<6>[ 11.443861] [0: kworker/0:2: 1132] [c0] sm5703_get_charging_health : vbus_status = 32
<6>[ 11.443871] [0: kworker/0:2: 1132] [c0] sm5703_get_charging_health : Health : 1
<6>[ 11.443891] [0: kworker/0:2: 1132] [c0] sec-battery battery.31: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<6>[ 11.443953] [0: kworker/0:2: 1132] [c0] sec_chg_get_property: slow-charging mode
<7>[ 11.544047] I[0: swapper/0: 0] [c0] usb: GET_DES
<7>[ 11.544124] [0: kworker/0:2: 1132] [c0] usb: android_work config= (null),connected=1,sw_connected=0
<7>[ 11.544191] [0: kworker/0:2: 1132] [c0] usb: android_work sent uevent USB_STATE=CONNECTED
<4>[ 11.547710] I[0: swapper/0: 0] [c0] usb: Reset interrupt - (GOTGCTL):0xd0000
<7>[ 11.683969] I[0: swapper/0: 0] [c0] usb: GET_DES
<7>[ 11.684157] I[0: swapper/0: 0] [c0] usb: set_config_number single config num=0
<7>[ 11.684171] I[0: swapper/0: 0] [c0] usb: config_buf f->mtp
<7>[ 11.684184] I[0: swapper/0: 0] [c0] usb: config_buf f->acm0
<7>[ 11.684195] I[0: swapper/0: 0] [c0] usb: config_buf f->adb
<7>[ 11.684206] I[0: swapper/0: 0] [c0] usb: set_interface_count next_interface_id=4
<7>[ 11.684506] I[0: swapper/0: 0] [c0] usb: set_config_number single config num=0
<7>[ 11.684519] I[0: swapper/0: 0] [c0] usb: config_buf f->mtp
<7>[ 11.684530] I[0: swapper/0: 0] [c0] usb: config_buf f->acm0
<7>[ 11.684541] I[0: swapper/0: 0] [c0] usb: config_buf f->adb
<7>[ 11.684552] I[0: swapper/0: 0] [c0] usb: set_interface_count next_interface_id=4
<6>[ 11.685829] I[0: swapper/0: 0] [c0] android_usb gadget: high-speed config #1: android
<7>[ 11.685843] I[0: swapper/0: 0] [c0] usb: set_config e mtp[0]
<7>[ 11.685880] I[0: swapper/0: 0] [c0] usb: set_config e acm0[1]
<7>[ 11.685896] I[0: swapper/0: 0] [c0] usb: set_config e acm0[2]
<7>[ 11.685923] I[0: swapper/0: 0] [c0] usb: set_config e adb[3]
<7>[ 11.685949] I[0: swapper/0: 0] [c0] usb: SET_CON
<7>[ 11.685960] I[0: swapper/0: 0] [c0] usb: set_config_number single config num=0
<7>[ 11.686013] [0: kworker/0:2: 1132] [c0] usb: android_work config=c0a92238,connected=1,sw_connected=1
<7>[ 11.686115] [0: kworker/0:2: 1132] [c0] usb: android_work sent uevent USB_STATE=CONFIGURED
<4>[ 20.493669] [3: hwrng: 887] [c3] hwrng: no data available

Categories

Resources