Develop Bugs

[RECOVERY]Philz Touch Recovery 6 for Lenovo A3300

After some long time trying to sign up for 4PDA (the captcha is really damn hard), finally have Philz recovery for our device.
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
DOWNLOAD IS AT ATTACHMENT
Flash using SP flash tool (untick all except Recovery and change the recovery to this recovery), or using apps like Flashify or MobileUncle Tool.

Please move this thread to the right section if it on the wrong section.

Use for A3300HV Or GV??

[twrp][ported] all ported twrp for realme 3

ALL WORKING PORTED TWRP FOR REALME 3
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs:
Tell Me
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. fastboot oem reboot-recovery
Enjoy !
Downloads : https://drive.google.com/open?id=14g1y5d7DlbTibKv0Evr_Bfs5dTZTz7rJ
XDAevDB Information
TWRP For Realme 3, Kernel for the Oppo Realme 3
Credits :
Realme 1 & Umidigi F1 Play TWRP
@jeffalaiza
@realme3dev
Version Information
Status: Stable
Screenshot : Inside the link
Please Thanks Me

[RECOVERY] Pitch Black Recovery for Realme X [RMX1901]

Code:
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this project
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
# Method 1 (Fastboot Installation)
1. Boot into fastboot mode by adb reboot bootloader or key combo, doesn't matter.
2. Download the twrp image following the link in the download section and transfer it to the adb folder (or add adb to PATH for universal access).
3. Open the cmd/terminal and change directory into the adb folder (or where you downloaded twrp image).
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug, linux users may need to change connection type to transfer files from charging only.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery <pbrp-recovery.img>
BooM ! PBRP flashed successfully.
# Method 2 (Zip Flashing)
1. If you haveany custom recovery(TWRP, Orange Fox etc.) installed in your device, then this is just a piece of cake.
2. Download & flash the zip from custom recovery install menu.
3. It will reboot to recovery automatically after that.
BooM ! PBRP flashed successfully.
Note: Flashable zip contains decryption patch, so you don't need to worry about encryption, you can check log right after flasing PBRP, there should be a string in green color confirming device encryption status.
Downloads
Both Image & Zip=> Here
XDA:DevDB Information
PBRP For Realme X, Kernel for the Realme X
Contributors
chankruze
Source Code: https://github.com/N00bTree/android_device_realme_RMX1901
Kernel Special Features:
Version Information
Status: Testing
Created 2019-09-20
Last Updated 2019-09-23

I cannot believe my eyes ! Thanks so much

No boot my phone..
How to flash...
Add Video..
Help me bro..

[RECOVERY][3.5.2_10][gtelwifiue][gtesqltespr] TWRP Recovery

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916

DJABHipHop said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916
Click to expand...
Click to collapse
thank you for all your great and dedicated hard work

blaze2051 said:
thank you for all your great and dedicated hard work
Click to expand...
Click to collapse
NP

New TWRP 10 update for Samsung Galaxy Tab E 9.6 & Samsung Galaxy Tab E 8.0 MSM8916 Model
Change Log:
- Backup Now Works.
- Plus All Partitions can now be backup.

Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|

fillotassi said:
Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|
Click to expand...
Click to collapse
Nope, This version of TWRP is for SM-T560NU & the SM-T337P.

Development [UNOFFICIAL][RECOVERY][12][CAPRIP] OrangeFox Recovery Project

OrangeFox Recovery​
Code:
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*
INSTALLATION:
1. Back up your important data
2. Boot image with "fastboot boot path/to/image"
3. The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
4. Install flashable zip
5. Enjoy!
Credits
* TeamWin - for TWRP Recovery
* The OrangeFox Team - for your hard work
* To all testers for their time and patience
* @TheRealDarkness for build OrangeFox
* @ThE_MarD for TWRP sources
FEATURES:
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* AromaFM
* Password, torch, led
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* And many more!
Screenshots: https://telegra.ph/OrangeFox-Recovery-Project--Moto-g30caprip-12-22
Source Code: https://gitlab.com/OrangeFox
Download recovery: https://sourceforge.net/projects/caprip/files/OFOX/
REPORTING BUGS!
* You tell me
* You have to wait 10-20 seconds for the touch to work, (recovery was tested on caprip with ilitek and Novatek touchscreen)

could you enable data decryption for android 12, or it impossible?
even once I disabled screen lock entirely, I can't "decrypt /data" for some reason, which severely limits the entire point of custom recoveries
(running via fastboot boot, not permanent install, but shouldn't make a difference)
otherwise it looks pretty cool!

jan6 said:
could you enable data decryption for android 12, or it impossible?
even once I disabled screen lock entirely, I can't "decrypt /data" for some reason, which severely limits the entire point of custom recoveries
(running via fastboot boot, not permanent install, but shouldn't make a difference)
otherwise it looks pretty cool!
Click to expand...
Click to collapse
did you boot recovery?
I can make a guide on how to decrypt data on this device, it's really easy to do it, in the Moto G³⁰ group in BR we have two methods to do it.
Although since the recovery is based on TWRP 3.7.0-12-0 it should decrypt itself )))

why else would I write here if I didn't boot into this orangefox, lol
I did
Code:
adb reboot bootloader
fastboot boot OrangeFox-R11.1_0-Unofficial-caprip.img
it's the same as with twrp, more or less, /data is locked, and mounting of /data is required for like half the functionality, and nandroid backups are most of the point of a custom recovery
from what I've heard twrp SHOULD be able to decrypt android 11 and 12, idk why it doesn't work for me with neither twrp nor orangefox (which even has a nicer pin entry box for decryption), even if I remove screen lock entirely, it can't do it... (I'm running android 12)

jan6 said:
why else would I write here if I didn't boot into this orangefox, lol
I did
Code:
adb reboot bootloader
fastboot boot OrangeFox-R11.1_0-Unofficial-caprip.img
it's the same as with twrp, more or less, /data is locked, and mounting of /data is required for like half the functionality, and nandroid backups are most of the point of a custom recovery
from what I've heard twrp SHOULD be able to decrypt android 11 and 12, idk why it doesn't work for me with neither twrp nor orangefox (which even has a nicer pin entry box for decryption), even if I remove screen lock entirely, it can't do it... (I'm running android 12)
Click to expand...
Click to collapse
With the attached file you can easily decrypt, just follow these steps:
1° Format data
2° Flash zip attached
3° Format data and reboot
After that the storage should be free of encryption.
Or you can use another method, if you use my rom you will know that all the partitions are in read-write, being able to modify anything, including the vendor. Another exp would be:
With the other attachment "fstab.zip"
You can do the download, then unzip "fstab.zip", it will leave a file called "fstab.qcom", with it you go to the vendor and mount it as RW, then follow the path "/vendor/etc" and copy fstab.qcom, then you do a reboot and the storage would be decrypted.