Develop Bugs

Wifi and Bluetooth not working Verizon Galaxy Note 4

I have a used Verizon Galaxy Note 4.
I can't turn on the WIFI or the Bluetooth.
Nothing happens when you tap the buttons for either of these.
So far, I opened it up and detached and reattached the 2 cables for wifi and Bluetooth . This did not resolve the problem.
It also appeared to have a custom firmware on it so I used odin and installed the latest original firmware but it did not solve the problem.
I was wondering if it could be the charging port board or the Bluetooth and wifi cables but I have read that some people had to swap the main board instead.
A couple of other unusual things,
If I go to settings and tap "System Updates" it says Software update is temporarily unavailable "
Also, if I boot to recovery mode it says "Installing system update" and then says "No command" and finally goes to the menu.

What bootloader are you on? Also what is your baseband and currently installed android version? What firmware did you flash? Is your carrier Verizon?

I couldn't log back in here for some reason so I had to use a different account.
Yes it is Verizon
Baseband: N910VVRS2CQC1
Android Version: 6.0.1
Firmware: MMB29M.N910VVRU2CQC1
In bootloader it says:
Odin Mode: (High Speed)
Product Name: SM-N910V
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START

JediYeti said:
I couldn't log back in here for some reason so I had to use a different account.
Yes it is Verizon
Baseband: N910VVRS2CQC1
Android Version: 6.0.1
Firmware: MMB29M.N910VVRU2CQC1
In bootloader it says:
Odin Mode: (High Speed)
Product Name: SM-N910V
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Click to expand...
Click to collapse
If you have data working, can you download this from the playstore https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en and after you install and open it, scroll over to firmware and tell me what it says there. That will tell you what bootloader you are on. You should be on the CPD1 bootloader.

dhplap said:
If you have data working, can you download this from the playstore https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en and after you install and open it, scroll over to firmware and tell me what it says there. That will tell you what bootloader you are on. You should be on the CPD1 bootloader.
Click to expand...
Click to collapse
I thought we got an update after pd1 that could he could potentially be on . I realize the bootloader didn't change but it may have gotten renamed to the appropriate firmware . That looks right (his device info) if it were stock updated

mojoswagger1980 said:
I thought we got an update after pd1 that could he could potentially be on . I realize the bootloader didn't change but it may have gotten renamed to the appropriate firmware . That looks right (his device info) if it were stock updated
Click to expand...
Click to collapse
The information he provided doesn't show what bootloader he is on though.

Yetisimo said:
I have a used Verizon Galaxy Note 4.
I can't turn on the WIFI or the Bluetooth.
Nothing happens when you tap the buttons for either of these.
So far, I opened it up and detached and reattached the 2 cables for wifi and Bluetooth . This did not resolve the problem.
It also appeared to have a custom firmware on it so I used odin and installed the latest original firmware but it did not solve the problem.
I was wondering if it could be the charging port board or the Bluetooth and wifi cables but I have read that some people had to swap the main board instead.
A couple of other unusual things,
If I go to settings and tap "System Updates" it says Software update is temporarily unavailable "
Also, if I boot to recovery mode it says "Installing system update" and then says "No command" and finally goes to the menu.
Click to expand...
Click to collapse
Hey man I m not sure how far you've gone but I'd have to suggest a complete factory reset then wipe from recovery then reinstall via Odin (latest firmware down to bpa1 should all be usable if you plan on rooting you need to go back anyway . Either way your info is correct something is wrong with your radio flash either pd1 or bpa1 just to be certain the bug isn't inherint to your current firmware

Thanks. It says Bootloader version N910VVRU2CQC1
Some other things while I'm looking.
PDA VERSION N910VVRU2CQC1 / N910VVRU2CQC1_QC4
CSC VERSION N910VVZW2CQC1
BASEBAND N910VVRS2CQ1
Kernel Version 3.10.40-8025465
[email protected] #1
32 BIT
ROOT EXISTENCE No

JediYeti said:
Thanks. It says Bootloader version N910VVRU2CQC1
Some other things while I'm looking.
PDA VERSION N910VVRU2CQC1 / N910VVRU2CQC1_QC4
CSC VERSION N910VVZW2CQC1
BASEBAND N910VVRS2CQ1
Kernel Version 3.10.40-8025465
[email protected] #1
32 BIT
ROOT EXISTENCE No
Click to expand...
Click to collapse
Well that looks right. I would take mojoswagger1980's advice.

I think that's what I already did unless I'm missing something. I did factory reset and wipe and installed the aforementioned firmware with odin.
I'm new to this.
Are you saying I missed something?
should i try again with a different firmware?

JediYeti said:
I think that's what I already did unless I'm missing something. I did factory reset and wipe and installed the aforementioned firmware with odin.
I'm new to this.
Are you saying I missed something?
should i try again with a different firmware?
Click to expand...
Click to collapse
Could you provide the link of the firmware that you flashed with Odin?

Ok.
Please note that this problem existed before I updated firmware.
I was hoping that updating firmware would fix it.
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
The link was
https://www.androidfilehost.com/?fid=745425885120726202

JediYeti said:
Ok.
Please note that this problem existed before I updated firmware.
I was hoping that updating firmware would fix it.
---------- Post added at 01:21 AM ---------- Previous post was at 01:19 AM ----------
The link was
https://www.androidfilehost.com/?fid=745425885120726202
Click to expand...
Click to collapse
Can I get the link to the thread that file came from? I checked Paul Pizz's threads and didn't find that exact download file. It seems like that should have worked. Might have been a bad download. I would try again and if that doesn't work I would Odin back to bpa1. That's lollipop but that would give you a fresh start so you could unlock your bootloader if you decided to. That's just my opinion though.

Could you send me links to good files please?

JediYeti said:
Could you send me links to good files please?
Click to expand...
Click to collapse
Try this with Odin https://www.androidfilehost.com/?fid=529152257862721079

I tried it but it didn't fix it. Maybe a hardware problem.

JediYeti said:
I tried it but it didn't fix it. Maybe a hardware problem.
Click to expand...
Click to collapse
are you sure its a verizon note 4? its easy to flash other carriers ROM . please post a pic of your devices about phone screen(s) so we have an idea what firmware we r talking about . you do lose WiFi f you take safe upgrade maybe you got a phone only partially updated . need more info

[Solved] Custom binary (recovery) blocked by frp lock after Note FE rom install

Hello everyone,
According to this post i did install note FE rom on my note 7 sm-n930F.
I did not have any problem flashing my first n930f.
Unfortunately, for my second install, i stupidly FORGOT to enable OEM unlock when flashing TWRP. :crying::crying:
I continued to install the ROM without problem but after the first reboot, the phone is blocked with the message "custom binary (recovery) blocked by frp lock"
I can boot in download mode (power + volume down + home) so i tried to flash a N930F stock rom but it fails with the message "check fail : device : 2 binary : 1"
(I think this is due to the fact that the stock rom is Android 6 and the device's rom is Android 7).
I tried Emergency Device Recovery from SmartSwitch PC without success : the device is not recognized by SmartSwitch.
I do not know what to do, can someone help me unbrick this phone ?
Thank you for your help.

Same for me. I cant believe it! No solution here from XDA community!

Open Odin flash TWRP , flash rom .

minhcanh97 said:
Open Odin flash TWRP , flash rom .
Click to expand...
Click to collapse
not so simple...
unable to flash TWRP -> blocked by FRP lock
I finally found the right stock rom for my N-930F (N930FXXU2BPI7) with help from pvpaco (see here)

I had the same problem (forgot to toggle oem lock) just flash the stock firmware for your device and it will boot (using odin) if you had a Google account it may ask you to sign in again if not just set up the device toggle the oem switch and flash twrp

The problem no flashable available stock rom for Korean models S/L/K. All failed in Odin. I had also a frp on , I can't flash any custom file.

For the note 7 or FE?

CrypticVorttex said:
For the note 7 or FE?
Click to expand...
Click to collapse
Note 7

What processor do you have snapdragon or exynos ?

CrypticVorttex said:
What processor do you have snapdragon or exynos ?
Click to expand...
Click to collapse
Exynos

so I found the firmware you need but it will take an age to download but you may not have a choice https://alfafile.net/file/FiXh this is for the n930s

CrypticVorttex said:
so I found the firmware you need but it will take an age to download but you may not have a choice https://alfafile.net/file/FiXh this is for the n930s
Click to expand...
Click to collapse
Thanks but it doesn't work already flashed. My device binary is on 2.

Can you boot to download mode? if so can you send a picture of that screen

Sorry I didn't tried this version, worked for u to solve frp lock?
---------- Post added at 06:03 PM ---------- Previous post was at 05:54 PM ----------
CrypticVorttex said:
Can you boot to download mode? if so can you send a picture of that screen
Click to expand...
Click to collapse
Yes I can but I need a version with binary 2.

Flashing stock firmware will get past the frp lock all I can suggest is try the firmware I posted and see if it works, keep me updated

CrypticVorttex said:
Flashing stock firmware will get past the frp lock all I can suggest is try the firmware I posted and see if it works, keep me updated
Click to expand...
Click to collapse
Samsung don't allow downgrading, I need the latest ota with 15 % battery limitation.

translpro said:
Samsung don't allow downgrading, I need the latest ota with 15 % battery limitation.
Click to expand...
Click to collapse
hmmm, not sure I can be any help then, unless you can find the correct official rom for your phone then the only other option would be to take it to a Samsung service centre (although the phone should be recalled they might still be able to help you)
sorry I cant help any more

Hi guys, I've got a note 7 UK n930f with 0% battery update, I can still access download mode but not recovery or system boot. OEM unlock is not switched on so I can install twrp or root or anything like that. I've tried lots of different firmwares but they all fail , see pics...
Does anyone have any info on what I can do next?
Thanks
Kev

Stuck with frp block on N930F. But I don't understand the title.. How is this a solved case? Could anybody anywhere find the 0% battery update firmware?

Dear all i hope somone of you can halpe i have samsung sm-n910p not 4 it has 6.0.1
N910pVPU5DQI5 and icant root or log in to the phone becaused it's block by google account

Why can't I update my Tmobile S6 edge plus?!!!

Hi everybody, I'm from Africa and I recently bought a used Tmobile Samsung Galaxy S6 edge plus (sm-g928T) but I can't do software update.
When I go to Settings > About device > And click "Download updates manually"
It says "Registering device..." and then it either says "Processing failed." or "Registration failed."
can you help me to fix this problem please?
I know the phone came from USA in an unofficial way but it's not lost or stolen, I checked it on the Web using imei number and it said it's "clean" device.

Tried a factory reset yet?
If you dont want to do that, then you can download the latest update from Sammobile and install it via Odin.

Smart switch restored my device for me

LEGONIKES said:
Tried a factory reset yet?
If you dont want to do that, then you can download the latest update from Sammobile and install it via Odin.
Click to expand...
Click to collapse
Hi, I did a factory reset and it didn't change anything.
If I flash the phone via Odin will it still recognize my local sim card or I have to unlock the phone after installing the update?

godkingofcanada said:
Smart switch restored my device for me
Click to expand...
Click to collapse
Hi, I tried smart switch and it showed message: "Your device software is up to date: PG1(TMB)" which doesn't make sense because my phone in on android 6.0.1 while it should be on android nougat

camalger said:
Hi, I did a factory reset and it didn't change anything.
If I flash the phone via Odin will it still recognize my local sim card or I have to unlock the phone after installing the update?
Click to expand...
Click to collapse
If you download and install the official version from sammobile (with f. Reset unticicked) the only thing changed should be the os. It would leave everything else as is, unless the way you have your phone unlocked is through some process I don't know.

LEGONIKES said:
If you download and install the official version from sammobile (with f. Reset unticicked) the only thing changed should be the os. It would leave everything else as is, unless the way you have your phone unlocked is through some process I don't know.
Click to expand...
Click to collapse
It's 20 bones for an unlock code anyway. No big deal. I have my defreeze and sim unlocked codes saved for my s5 s6e+ and s7

LEGONIKES said:
If you download and install the official version from sammobile (with f. Reset unticicked) the only thing changed should be the os. It would leave everything else as is, unless the way you have your phone unlocked is through some process I don't know.
Click to expand...
Click to collapse
Should I install the latest update or the same version I have then check for the OTA update?
My phone baseband version is G928TXXU3DPG1 which is wired because I can't find any firmware with (XX) in the middle on sammobile or any other website, the most similar is G928TUVU3DPG1 but I don't wanna use a wrong firmware, I need to be sure.
Any suggestion please? Could my phone be simply refurbished and doesn't support android updates?

Solved using Samfirm and Odin

[G930U] FEB-2019 - Official Stock Firmware OREO for Unlocked S7 (G930UUEU9CSA3)

[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5

sm g930u v9 bootloader
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery

Nelson456 said:
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery
Click to expand...
Click to collapse
can someone please check this out if their is a downgrade method etc boot recovery for v9 i would appreciate it this is insane i regret when i hit the ota update button

SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
It has worked for me, thank you very much.
.Details of my Galaxy s7:
-G930P
-Had the February 2019 update, Bootloader v9.
Thank you and luck to others.:laugh:

Can I flash this firmware on a G930a unlocked S7??

Neoguto said:
Can I flash this firmware on a G930a unlocked S7??
Click to expand...
Click to collapse
Should work just fine

Nice work...
Installed this with all tools in thread. Appears to take the image, updates Android to 32% then shows "Erasing". Reboots, says something about rebooting for Sim Updates, does this for a few mins. Then updates Android apps and boom, new stock phone no provider junk on it. Very nice. If I find any issues after the phone setup, I will post update, but if nothing, appears this is now a Stock unlocked phone.
Phone - SM-930P Sprint
Had most recent April Update
No longer on sprint, it's on GoogleFi now, but was unlocked by provider

Is this rootable or did I just take my Marshmellow S7 and destroy it's rootability??? FML why oh why didn't I ask this before doing it...

Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty

Ap958571 said:
Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty
Click to expand...
Click to collapse
I'd say oreo, the newer the better for the sake of actually being able to obtain the apks from the google play store.
I was able to run most games just fine with this rom. :good:

Is this specifically for TMobile users? It's just that i noticed it was TMB-$(version_info).
I guess my question is, does it matter if i use this on a Straight Talk phone, or should i suck it up and spend a day downloading the VMU rom from SAMMOBILE?
More specificity, if it matters. Previously i upgraded from stock Straight Talk rom that came with the phone to VMU, with the SM-G930U firmware. I'm looking to upgrade from Nougat to Oreo now though.
Currently my phone is running VMU-G930UUES4CRG3-20180809155130

SethGandy said:
Should work just fine
Click to expand...
Click to collapse
probably a dumb noob question, but do i have to request a carrier unlock on a 930A before i do this? it is currently carrier locked.
also, after doing whatever is required, will it get OTA unlocked updates?
EDIT: i went ahead and got my s7 unlocked with the ATT code. on trying to flash i got an SHA256 error. after some google i checked the bootloader is "8". is this why? update checker says i'm up to date with Dec 3 2018 security updates...

I'm sorry but is these Snapdragon S7 variants likely to have a Android 9 Rom in the future?
I know it's idiotic btw hope some responses would be left.

SethGandy said:
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
Click to expand...
Click to collapse
This is the first time I've done this and other guides seems to say the opposite. Can someone confirm which I should use if I don't want to do a clean install?
Thanks

Will WiFi calling still work after installing this on a T-Mobile S7? Thank You.

SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx

kdkhimura said:
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx
Click to expand...
Click to collapse
I have the same setup and it worked for me.

whatubeggin said:
I have the same setup and it worked for me.
Click to expand...
Click to collapse
any problem after u update ur phone??

change the samsung s7 logo at startup
Hello, I'm French I do not speak English well. I am looking for someone who can help me change the logo Samsung S7 powered by android at boot time.
Thanks in advance.

Bring aosp 9 plis

Samsung Note10+ Not updating at all

Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps

NYKNick1015 said:
Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps
Click to expand...
Click to collapse
+1 for me. Ive spent almost 2 years and 3 phones trying to get an answer to this. My note 8 had this problem, then my note 10+, then the replacement note 10+. At&t blames Samsung, then Samsung blames at&t, over and over and over. I even had a Samsung technician sit in on a 3 way call with an at&t technician for the better part of an hour. The last I heard was that at&t was petitioning samsung to fix something on their end because at&t shows that everything is up to date on my phone but its not. Im looking into Odin too because this is getting stupid.

At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk

So I can use a verizon csc and it will work on a att branded phone? Or is a generic one better?
Edit
Basically which one do you pick. I'm leaning towards a tmobile because it sounds like the included bloatware is smaller.

I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk

butchieboy said:
I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
I actually went ahead and did this last night with the tmobile firmware and it was just as easy as you said. For whatever reason I didn't even get any bloatware. It booted up with the at&t logo and sound, and my software version says att/att/att. I put my sim card back in and there were no special notifications or anything, everything just worked. I wonder if Frija gave me the att firmware despite me putting in tmb? Either way, everything is up to day now. Thanks for the help!

Anytime my friend glad it all worked out[emoji106]
Sent from my SM-N975U using Tapatalk

US to EU Automatic Updates
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.

butchieboy said:
At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Hi I have the same problem. I flashed android 10 One UI 2.0 on my Exynos Note10+ SM-N975F last December via Odin and download the firmware from Samfrew(like Sammobile).(the firmware is the German version and I bought my phone from Egypt) Since then I didn't receive any security patch updates I only have the December 2019 one. Will it be safe if I download the latest firmware from Sammobile and flash it; the file in over 5GB , can this overwrite? I never tried to flash the same software two times. Is it safe?

As long as you are using the firmware that is for your device and your region you should be fine. Although this is Snapdragon thread I would think International flashing is same. You may want to double check in your device specific thread as I don't want to be the blame if there is something different with F version.
SM-N950U Extreme Syndicate Root
---------- Post added at 06:21 AM ---------- Previous post was at 06:11 AM ----------
Also try turning off auto update date and time. Set date like 5days ahead. Then check for update. Sometimes this little trick works for OTA
SM-N950U Extreme Syndicate Root

Robiko said:
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.
Click to expand...
Click to collapse
Yes,i have u1 version and i receive update regulary,now waiting for oneui 2.1 [emoji3]