So I upgraded from the Pixel to the Pixel 3 and I'm looking for a decent card case. I'm a student and have to constantly carry my student ID with me to pay for food, ride the bus, get into my room, etc. There were no good options for the Pixel, and the Pixel 2 has the Spiegen Slim Armor with Card Slot Holder (can't link, new user ¯\_(ツ)_/¯ ) which is ideal, but there are none for the 3. I have an adhesive card holder on the back of my case now, but I'd really prefer to have on built-in that's not a flip open wallet case. Are there any out there right now, or will I just have to wait?
YutBrosim said:
So I upgraded from the Pixel to the Pixel 3 and I'm looking for a decent card case. I'm a student and have to constantly carry my student ID with me to pay for food, ride the bus, get into my room, etc. There were no good options for the Pixel, and the Pixel 2 has the Spiegen Slim Armor with Card Slot Holder (can't link, new user ¯\_(ツ)_/¯ ) which is ideal, but there are none for the 3. I have an adhesive card holder on the back of my case now, but I'd really prefer to have on built-in that's not a flip open wallet case. Are there any out there right now, or will I just have to wait?
Click to expand...
Click to collapse
Here's one.
Related
Has anyone bought one of these?
Any reviews? or Speculation?
http://www.ebay.com.au/itm/160687657213?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Not sure I would want to put my note in one of those. I would be devastated if it fell out of the holder.
What would you do with it on the handlebars anyway?
DannagE said:
Not sure I would want to put my note in one of those. I would be devastated if it fell out of the holder.
What would you do with it on the handlebars anyway?
Click to expand...
Click to collapse
I agree. I'd jazz the holder up a little more to secure it in place.
And it could be used for navigation, speedometer, there for ease of access for music controls, all sorts.
I would not trust $7 worth of plastic to maintain a friction fit grip on my $700 phone. It is more money, but I plan to buy the RAM mounts aquabox if I decide to mount it on my bike.
David
After I was looking for a bike mount I simply chose this and ordered.
Delivery of course as usual quickly with Amazon Prime.
At first I was a little skeptical when I saw the fastening method with the rubber bands.
This skepticism was gone after the first try immediately. In the pictures, the holder acts huge, so I was pleasantly surprised when I received it.
It is pretty small, well packaged and assembly instruction was also there. The blue areas are all gummed and coated in the supply with a protective film. The lateral mounting arms with feathers on train kept so many devices can be transported with it. The suspension is so strong that my phone (HTC 10) also remained so already in the holder. For safety's sake you do of course still the 4 rubber straps up so that the device is firmly locks in the holder. Of course, the fixing on the bicycle handlebar designed to also easily and is suitable for all kinds of thick rods.
All in all this is a great product at a reasonable price.
I've been using my S7 Edge with the Choetech mount on my mountain bike for a month now. At first I didn't think the silicone band would stretch over my S7 with a Samsung case on it but it does. The design and build quality of the mount is good. The phone isn't going anywhere. It's cool that I can listen to Pandora while riding and still be able to hear any noise around me. I'm thinking on getting a backup phone though just in case I wipe out. *knocks on wood* lol
I also have a few Choetech wireless chargers. Never had a issues with their products and the pricing is good.
One piece of advice if I may: if you are going to actually use it on your bike, please use some glue or some other form of reinforcing the part that is connecting the actual holder to the handlebar grip. Those 4 pins will "unclick" by themselves if the vibrations are strong enough (like when you ride on rough terrain or if you go on and off the sidewalk). It happened to me in the past and I ruined a nice phone back then. Lesson learned.
TomF1979 said:
After I was looking for a bike mount I simply chose this and ordered.
Delivery of course as usual quickly with Amazon Prime.
At first I was a little skeptical when I saw the fastening method with the rubber bands.
This skepticism was gone after the first try immediately. In the pictures, the holder acts huge, so I was pleasantly surprised when I received it.
It is pretty small, well packaged and assembly instruction was also there. The blue areas are all gummed and coated in the supply with a protective film. The lateral mounting arms with feathers on train kept so many devices can be transported with it. The suspension is so strong that my phone (HTC 10) also remained so already in the holder. For safety's sake you do of course still the 4 rubber straps up so that the device is firmly locks in the holder. Of course, the fixing on the bicycle handlebar designed to also easily and is suitable for all kinds of thick rods.
All in all this is a great product at a reasonable price.
Click to expand...
Click to collapse
If mounted upright, and set it to record video. Does the mount obstruct the camera at all? Looks like it's close to clearing the mount. I'm looking for something that can record without obstructing the camera.
If you guys are looking for a really solid bike mount, I tested this one for Cheotech and it is pretty secure. I would recommend it.
I use it with my HTC 10 and Neo Hybrid case and it fits great. Just FYI if ppl want more options
CHOETECH-Universal-Mount
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.
I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.
I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...
I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?
I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk
Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?
Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk
morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk
I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.
morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.
I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.
I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
What is everyone using?
My old side spring grip style one isn't going to work. I love the thing but it either presses on the volume buttons or activates Assistant. Have any of you found one that works without these issues?
I'm considering one of the magnetic ones but I don't like the idea of having to add a piece of metal to the back of my case.
Any success stories?
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Sent from my Pixel 2 using Tapatalk
Izeltokatl said:
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Click to expand...
Click to collapse
That is pretty cool. Make a good Xmas gift too.
Izeltokatl said:
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
I really like the looks of those! Very clean.
Have you had any issues with the phone wanting to spin on the mount?
Thanks,
Jared
I'm waiting for my Pixel 2 to arrive, but I use a Spigen Magnetic Mount for my air vent currently. They offer a windshield/dash mount also. It holds very tight, but not too tight. No issue with the phone falling and/or rotating during driving.
I'm wondering if any of the Spigen cases will work without the need to put the metal plate inside. I currently have the metal plate inside the back cover of my Galaxy S5, but I can tell there is a bulge where it is placed.
I'm on the list to be notified when these release. By far the best holder charger combo I've ever used https://www.proclipusa.com/category/google-pixel-2
Can't tell you how disappointed when I popped my new phone into the dash mount only to watch the volume drop on it's own. The volume rocker placement on the Pixel 2 leaves a lot to be desired. I'm not a huge fan of magnets interfacing with computers to be honest. Hope I can find a decent alternative.
I use the Tetrax, both the Fix and Xway. Most of the time I use the Fix, because I like having my air vents actually blowing air on ME, but in the summer, on a long drive, using the GPS and charging the device, it can sometimes get warm. I just take it off the Fix, and move it to the air vent to let the air conditioner cool it down. I've used this system for nearly a decade, not sure if the Pixel 2 will get warm enough to need the air vent.
The only thing you need to put on the phone is a small metal button. The package comes with several sizes. I adhere this to my Spigen Thin Fit case, so it doesn't have to be attached to the actual phone.
http://store.tetrax.us/en_us/featured/tetrax-fix.html
http://store.tetrax.us/en_us/featured/xway.html
ClutchIT magnetic mount system.
krelvinaz said:
That is pretty cool. Make a good Xmas gift too.
Click to expand...
Click to collapse
I got two of these yesterday, one for me and another for a Xmas gift.
Works great. I have had co-workers, friends and family who have seen it, express interest in getting one for themselves.
I order 6 extra plates to go with each unit. It already comes with several extras. I have only used one plate so far because a allot of places I will use it are metal surfaces.
I put the thin disc on the back of my phone and put my case back on. Nothing to see until I actually use it.
Good mount.
https://clutchit.com
Ok
Brodit
Adjustable active Brodit + ProClip :good:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Shibang said:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Click to expand...
Click to collapse
I second this, I find the magnetic car mount is by far the best I've ever used, the one i previously used, used to activate active edge or turn volume down, which was quite annoying.
Scosche
I was using Scosche before Brodit.
awesome
Anyone have any experience with mous.co?
$50 !!!!! https://www.mous.co/collections/pixel-5-case
$120 !!! https://www.mous.co/products/wireless-charger-for-car?variant=31852886687802
Sticker shock has me running for the hills but I can't find any other reputable options for magnetic mounting/charging.
Anyone other magnetic mount Qi chargers out there? Cheers.
This one works wonders for me. It's not magnetic but the self actuating arms are smooth and silent.
https://www.amazon.com/dp/B08BRB124G/ref=cm_sw_r_cp_apa_fabc_K2SQ2J9P26C8T4VPDHHR?_encoding=UTF8&psc=1
jtlrwells said:
This one works wonders for me. It's not magnetic but the self actuating arms are smooth and silent.
Amazon
Click to expand...
Click to collapse
from where can I get Google Accessories in Canada?
from where can I Get it in Canada?
I live in Canada and I dont want to purchase it online but want to purchase physically.
_aa_ said:
Anyone have any experience with mous.co?
$50 !!!!! https://www.mous.co/collections/pixel-5-case
$120 !!! https://www.mous.co/products/wireless-charger-for-car?variant=31852886687802
Sticker shock has me running for the hills but I can't find any other reputable options for magnetic mounting/charging.
Anyone other magnetic mount Qi chargers out there? Cheers.
Click to expand...
Click to collapse
I have the limitless case for my Pixel 5. It's okay. I paid $34 for it on sale and even that feels overpriced. It's fairly large and bulky but protects the phone well. The buttons are sub-par and the fingerprint sensor is very recessed. I haven't tried any of their magnetic accessories so can't comment on that. If you do decide to pick one up, definitely wait for a sale.
araibbdami said:
from where can I get Google Accessories in Canada?
Click to expand...
Click to collapse
Amazon would be your best bet. I got a case called the Dbrand Grip. You get to choose a skin to put on the back of the case and it's wireless charging compatible.
_aa_ said:
Anyone have any experience with mous.co?
$50 !!!!! https://www.mous.co/collections/pixel-5-case
$120 !!! https://www.mous.co/products/wireless-charger-for-car?variant=31852886687802
Sticker shock has me running for the hills but I can't find any other reputable options for magnetic mounting/charging.
Anyone other magnetic mount Qi chargers out there? Cheers.
Click to expand...
Click to collapse
I'm using this case for my Pixel 5 and happy with it.
It has metal plate built in for magnetic mount.
I can wireless charge it without removing case.
Nimbus9 Cirrus 2 Dual Layer Protection Phone Case for Google Pixel 5 - Black (GOPX5N9CI2BK) | Visions Electronics Canada
www.visions.ca
I have both as well as the card holder.
I originally purchased the Aramid Fiber case, but that material proved to be a fingerprint/oil magnet. I then ordered the Speckled Fabric case and am quite pleased with it. It has a soft touch feel, doesn't attract dust or dirt, and cleans up very easily with a damp cloth. The case itself is not the slimmest, but it is also not what I would consider bulky, being just slightly smaller than the Spigen Tough Armor. The top and bottom edges have a slight lip to keep the screen from sitting flush when placed face down, with a screen level dip on the sides to facilitate edge swiping. Though it seems some may disagree, I feel that the edges are perfectly contoured, the buttons feel just right, and it has plenty of grip. Overall, in my opinion, it is a great case assuming you plan to take advantage of the Limitless 3.0 accessories.
The wireless charger mount is nearly perfect with one significant caveat: The vent clip is terrible. However, since the ball joint cup/tightening ring is on the mount and not the clip, if you already have another mount that has a 17mm ball joint, such as an iOttie dashboard or disc drive mount, you can easily swap in the Mous mount and it will fit and tighten easily and securely. As for the magnetic hold, it is very secure and does not have any alignment or slide/drift issues like most of the stick-on metal plate magnetic systems I've tried previously.
As for the card wallet, it too is nearly perfect, assuming you only need to carry a maximum of 3 cards and a couple of double or triple folded bills. It's a little stiff at first, but the leather-like material seems to have a little stretch to it, and will also return to form assuming you don't cram it too full. It also attaches securely and detaches easily.
At this point I've been using them for about a month, and I would say it's probably the closest thing to a MagSafe-like setup you can find for a very select range of Android phones.
All of the pieces also seem to be well constructed and are likely to last quite a while assuming you don't regularly put your phone through a lot of abuse.
My final piece of advice would be this:
Since their products are a bit pricey, buy the case first, try it for a few days to see if you like it. If you do, go back and use the 20% off code they give you with your first purchase to purchase the other accessories you want to add. If you don't, return it and you're only out the cost of return shipping.
bit of a late reply but yeah i have the limitless 3.0 case myself, i saw some people review it and they seemed quite positive about it so i bought it and i am happy with it, it still charges wirelessly just fine and NFC still works as well even tho its quite a chunky case which i rather have then a case which gives like no protection