Stable Pie ROM for Honor 6x - Honor 6X Guides, News, & Discussion

DISCLAIMER
This ROM is not my work. It belongs to Askucio Droid (Sorry if I got the spelling wrong) & Team Pixys OS. I am just posting on this section for our devices with detailed instruction.
WARNING
Your warranty is now void. I am not responsible if you brick your device. Please make sure you know what you're doing and don't proceed if you don't meet the requirements. However I will try to help all I can.
REQUIREMENTS
*Unlocked Bootloader
*You must be on Stock EMUI 8
*Honor 6x
*TWRP recovery
*Non-Rooted Device
*Patience
DOWNLOAD
OpenGapps: https://opengapps.org
(Download the nano package for arm64 & Android 9)
ROM: https://sourceforge.net/projects/pixys-os/files/pie/hi6250/
(Download latest zip.)
INSTALLATION
*Boot your device into TWRP recovery.
*Wipe->Format Data->YES->Advanced Wipe.
*Mark Dalvik/ART Cache, Cache, Data, Internal & System.
*Perform the wipes. Only wipe these mentioned and nothing else.
*Now go to install and select Pixys OS zip. Delay: 2-4 min.
*Wipe Cache and then install Gapps. Delay around 3-4 min. Again wipe Cache.
*Now goto Reboot-> Power Off/Shutdown.
*Now plug your USB cable into computer and other end into phone while holding Volume Down and boot into Bootloader.
*Flash Stock Recovery for your device.
*Power off by holding power button. Once phone restarts hold Volume Up to enter into erecovery and Wipe Data/Factory Reset.
*Wipe Cache and Reboot.
*Initial Configuration and Start.
Rooting
Boot your device into Bootloader and flash TWRP from Elemental ROM thread (Be sure to thank KingOfMezi). After that flash latest Magisk for root goodies.
If you face any problem feel free to ask. ROM is not mine. I simply make the guide to flash on Honor 6x. All credit goes to Askucio Droid and Pixys OS Team.

Great post!
I still have to rebrand and update to emui8.
Looks like a huge job.

I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here

After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.

Hi sir thank you for this guide always wanted to flash this pixy os but no detailed instructions for pur device..
Im just a newbie here..
Can you help me find the link for the recovery for my device.
im on BLL-L22?
anyone pls help me

BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.

galapagos said:
After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.
Click to expand...
Click to collapse
I always find buttons easy. But yeah you can do that as well. I guess whatever suits you.

Alex19Gam said:
I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here
Click to expand...
Click to collapse
No idea how to do that but thanks for doing that. I can't even spell the name right LOL :silly:

Mannan Qamar said:
BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.
Click to expand...
Click to collapse
Oh man....I think I need to rebrand first for this then get the emui 8 im still running on emui 5...im from the Philippines..
so the stock recovery should be on the updater.app the ill just extract that file then I need to look for "recovery.img"?
is that how its done?

Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.

Is the moble metwork standby battery drain bug in this rom?

Mannan Qamar said:
Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.
Click to expand...
Click to collapse
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning

Can I upgrade from EMUI 5.x ???

ubaidpks said:
Can I upgrade from EMUI 5.x ???
Click to expand...
Click to collapse
No. You will brick your phone. First upgrade to EMUI 8

jhorne917 said:
Is the moble metwork standby battery drain bug in this rom?
Click to expand...
Click to collapse
No. Battery Life is awesome. No drain on standby.

jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but Don't ignore it and fix signal first then after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.

One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?

Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.

jasonalejandro507 said:
One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?
Click to expand...
Click to collapse
Yes you can but to be on the safe side I would advise to restore EMUI 8 first. Though you can go directly if you wish.

Sephiroth79 said:
Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.
Click to expand...
Click to collapse
jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but dont ignore it fix it first and after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.
Follow along. You're both in the same boat.

Related

Asus Fonepad 7 FE170CG

Hello, friends!
It's been a really long time after my Q900 and X3D-SE...
For those who are having trouble with Asus Fonepad 7 2014 FE170CG in terms of softbrick, kindly take some time to read this thread.
I am currently on Latest Kitkat with version: 11.2.3.33
1.) In terms of Rooting(Offcourse YES, this tab is rootable) i rooted this device with Rootzenphone.apk(attached below). Kindly follow the tutorial here to root the device. When it doesn't get rooted in first time, repeat it. I got it rooted at 1st time itself. After rooting, i removed all the apps i don't need!
2.) To update your Fonepad, download the appropriate zip firmware(zip rom) from the Asus site. Download the matching SKU's only. For eg: WW-WW, CN-CN, JP-JP etc... And i really don't know about installing CN firmware over WW variants. After downloading, rename your file accordingly. Eg: UL-K012-WW-11.2.3.33-user.zip to k012_sdupdate.zip and put the file in the root of external SD card. Time to backup all your critical data! Finally switch off your tab. Now press Vol up + Power buttons until you see the Asus logo. If you are in Jelly Bean, the options are slightly different where you have to choose SD update. Your tab will now reboot to recovery, installs the update and reboots back to the installed firmware. On the other hand, if you are in KitKat, the options like SD download and SD update won't be available because they are removed from the newer Fastboot images. The SD update and SD download are now replaced by recovery option which is the one you need to select. After that device will reboot and install the updates.
3.) To downgrade the firmware to JellyBean, download the appropriate version of the firmware file(I used UpdateLauncher_K012_WW_10_32_1_33_1.zip) and follow the steps as above. Your device will be downgraded. In this version the options on the Droidboot menu will be different from the KitKat version. Just choose SD update to install any other updates.
4.) This is the main part for which i am creating this thread!
THE SOFT BRICK
I was pulling off my hairs for about a day trying to figure out the problem.
Reason for my softbrick: I got a feeling that my device was slightly going slow and the amount of available free RAM was only 200MB. SO, i was considering to Downgrade the firmware from Kitkat to Jellybean. I downloaded the Jellybean firmware UpdateLauncher_K012_WW_10_32_1_33_1.zip from the Asus site and installed it using the method above! Everything went fine and device booted to JellyBean with the familiar interface. Everything was fine but i noticed that the device was slightly heating up and was missing many features like dual apps etc... Hence i decided to go back to KitKat which is were all the problems began! I downloaded the latest firmware UL-K012-WW-11.2.3.33-user.zip. Installation begun as usual but at the end, installation was terminated with a message error. I was shocked! When i rebooted the device i got a USB icon with a red progress bar in a second and went away! The device neither booted nor charged! I repeatedly tried this procedure but failed continuously. I booted to the Droid Boot and saw the firmware version was fine and can't figure what the problem was! But i noticed that the same JellyBean firmware installed again without any glitches and booted fine. When i tried the Kitkat firmware, it failed again and device didnt't boot. This is tricky part! So, i downloaded the first kitkat firmware UL-K012-WW-11.2.3.18.2-user.zip after the JellyBean and tried to install it. To my suprise, the installation went fine and device booted up with that KitKat firmware. Now i put the latest Kitkat firmware UL-K012-WW-11.2.3.33-user.zip to the external SD card and tried to install it and it successfully installed :victory: :victory: Now i am back on the latest firmware
My recommendation : If you do anything, make sure to backup data and have knowledge on what you are doing. Thanks for reading this thread. Please press thanks if i helped you!
Lollipop update has been released some time ago. Please remember to unroot before you update or else you'll get soft bricked.
downgrade and ota update
In lillipop i got major laggs and baterry drained more than 50% over night in standby mode.
So I downgrade to latest kitkat WW_V11.2.3.33 from asus site, using fastboot and intel temporary cwm recovery.
It works great but now ifwi is 64.33 from lollipop, not 64.25 from kitkat.
It seems there is an OTA update WW_V11.2.3.34 but I dont get notification for download.
Is there any way to downgrade ifwi version?
Or do I have to ask here someone for capture the WW_V11.2.3.34 OTA update from /cache and upload here?
Or is there any fix for lillipop horrible lag (2-3 secs after presing or swiping) and masive battery drain? I tried factory reset lollipop and even reinstall with fastboot erase system and intel thetered temp cwm install UL-K012-WW-12.8.1.26-user.zip
b0by said:
In lillipop i got major laggs and baterry drained more than 50% over night in standby mode.
So I downgrade to latest kitkat WW_V11.2.3.33 from asus site, using fastboot and intel temporary cwm recovery.
It works great but now ifwi is 64.33 from lollipop, not 64.25 from kitkat.
It seems there is an OTA update WW_V11.2.3.34 but I dont get notification for download.
Is there any way to downgrade ifwi version?
Or do I have to ask here someone for capture the WW_V11.2.3.34 OTA update from /cache and upload here?
Or is there any fix for lillipop horrible lag (2-3 secs after presing or swiping) and masive battery drain? I tried factory reset lollipop and even reinstall with fastboot erase system and intel thetered temp cwm install UL-K012-WW-12.8.1.26-user.zip
Click to expand...
Click to collapse
For some reasons, i too didn't get that update! I am also in 11.2.3.33 I flashed the device 4 times just to get this update but didn't!
b0by said:
In lillipop i got major laggs and baterry drained more than 50% over night in standby mode.
So I downgrade to latest kitkat WW_V11.2.3.33 from asus site, using fastboot and intel temporary cwm recovery.
It works great but now ifwi is 64.33 from lollipop, not 64.25 from kitkat.
It seems there is an OTA update WW_V11.2.3.34 but I dont get notification for download.
Is there any way to downgrade ifwi version?
Or do I have to ask here someone for capture the WW_V11.2.3.34 OTA update from /cache and upload here?
Or is there any fix for lillipop horrible lag (2-3 secs after presing or swiping) and masive battery drain? I tried factory reset lollipop and even reinstall with fastboot erase system and intel thetered temp cwm install UL-K012-WW-12.8.1.26-user.zip
Click to expand...
Click to collapse
Hello! Ifwi is easy! Take the KitKat Firmware and unzip it complitely, so that you have acces to the files of the rom.zip (Firmware)! In the Firmware (1st-Site) is a ifwi.zip! Unzip this ifwi.zip, and take the dnx_fwr.bin (VLC) and the ifwi.bin (VLC) file, and copy it to your adb/fastboot binarys! Then go to fastboot-mode and First: fastboot flash dnx dnx_fwr.bin, when its done, Second: fastboot flash ifwi ifwi.bin, when its done, reboot bootloader, and check ifwi-version! Should be the version you have flashed!
But do it in your own! Im not responsebile for failure or brick!
Bluetooth permission to receive apk
hi
i cant underestand English very well but i have question
i have asus fonepad 7 fe 170 cg kitkat and i rooted this but i cant receive .apk with Bluetooth for this reason i installed xposed and i downloaded Bluetooth ToolKit.apk
whit this program my bluetooth have permission to receive apk but i want to know what file chenged in root divice and in permission that my bluetooth can receive apk
please say me what file chenged???????
Are you getting play store links when you send an .apk file or can't receive files at all??? And i never installed xposed since it has no use for me....
roselanguste said:
Hello! Ifwi is easy! Take the KitKat Firmware and unzip it complitely, so that you have acces to the files of the rom.zip (Firmware)! In the Firmware (1st-Site) is a ifwi.zip! Unzip this ifwi.zip, and take the dnx_fwr.bin (VLC) and the ifwi.bin (VLC) file, and copy it to your adb/fastboot binarys! Then go to fastboot-mode and First: fastboot flash dnx dnx_fwr.bin, when its done, Second: fastboot flash ifwi ifwi.bin, when its done, reboot bootloader, and check ifwi-version! Should be the version you have flashed!
But do it in your own! Im not responsebile for failure or brick!
Click to expand...
Click to collapse
I have 4 .bin files in ifwi.zip:
CLVp_CSAX_FWR_DnX_20.3E.bin
CLVp_CSAX_OS_DnX_20.3E.bin
IFWI_v64.25_CSAX_PROD.bin
signed_CLVP_CSAX_SoftFuseFile.bin
Dont I have to flash them all? or just the ...FWR_DnX.bin and IFWI_v64.24....bin?
My dear friends, please concentrate on getting Clockworkmod and Cyanogenmod... I am trying real hard here. I contacted all the devs i could, none willing to help me! No device & vendor tree, Locked bootloader, No custom recovery, No stable ROM...... Really feeling so down
OK! You have Four ifwi-Files, Yes then Flash them All!
Expecting some help over here!!! Support me for creating device and vendor trees........
Downgrade IFWI version!
roselanguste said:
Hello! Ifwi is easy! Take the KitKat Firmware and unzip it complitely, so that you have acces to the files of the rom.zip (Firmware)! In the Firmware (1st-Site) is a ifwi.zip! Unzip this ifwi.zip, and take the dnx_fwr.bin (VLC) and the ifwi.bin (VLC) file, and copy it to your adb/fastboot binarys! Then go to fastboot-mode and First: fastboot flash dnx dnx_fwr.bin, when its done, Second: fastboot flash ifwi ifwi.bin, when its done, reboot bootloader, and check ifwi-version! Should be the version you have flashed!
But do it in your own! Im not responsebile for failure or brick!
Click to expand...
Click to collapse
Hello, i tried to downgrade IFWI version by following your method... Everything flashed successfully but the version number stays the same! For eg. if i flash version 64.25, it still stays the 64.33 version of Lollipop firmware only!!! Do you know why???
irfanjunaid said:
Hello, i tried to downgrade IFWI version by following your method... Everything flashed successfully but the version number stays the same! For eg. if i flash version 64.25, it still stays the 64.33 version of Lollipop firmware only!!! Do you know why???
Click to expand...
Click to collapse
Hello! Have you more than this two files in your ifwi.zip? In many cases there are more files in ifwi.zip! Unzip the ifwi.zip and flash all files what is in there! Token.files=fastboot flash token filename, dnx.files=fastboot flash dnx filename, and ifwi.files=fastboot flash ifwi filename! But i suggest you, when you not need this ifwi/dnx for anything, then you should stay on the newer ifwi?! ifwi is BIOS for Intel Phones! So you have KitKat with the newer BIOS-update from Lollipop! Its like a BIOS-update for PC!
Ever since i flashed that Lollipop 64.33 IFWI, i didn't get access to the 11.2.3.34 update at all! So, do you think this IFWI version is problem or Asus pulled that firmware from its servers???
@irfanjunaid , Hello sir.
I just got Asus model: k012 Stuck on logo.
Now i am downloading all the firmwares u mentioned in the OP, but one question .. Did u flash them via stock recovery or u flashed the temporary cwm recovery available .
Sobaro said:
@irfanjunaid , Hello sir.
I just got Asus model: k012 Stuck on logo.
Now i am downloading all the firmwares u mentioned in the OP, but one question .. Did u flash them via stock recovery or u flashed the temporary cwm recovery available .
Click to expand...
Click to collapse
Always flash Stock ROM via stock recovery.... I did via stock recovery... But don't forget, rename the downloaded zip file to k012_sdupdate.zip and put it into a clean formatted SD card. Now press volume up + Power button until you see Asus logo. Now choose Recovery. Now your tab boots to recovery, installs firmware and reboots itself.... Note: No downgrade possible, cannot change SKU(WW-CN etc.....)
I get stuck at the Asus Logo after intel splash.... with a spinning wheel that keeps on going and going and going.... I have download the files you mentioned above, put them on SD card but cannot boot into droidboot, it goes back to main screen. When I select Recovery, it runs about 5 seconds and gives error and then restarts. What seems to be the problem here?
Thanks!
Jabbacks said:
I get stuck at the Asus Logo after intel splash.... with a spinning wheel that keeps on going and going and going.... I have download the files you mentioned above, put them on SD card but cannot boot into droidboot, it goes back to main screen. When I select Recovery, it runs about 5 seconds and gives error and then restarts. What seems to be the problem here?
Thanks!
Click to expand...
Click to collapse
What version of firmware are you in now? Is it rooted? Did you try a factory reset? After factory reset allow tab to take some time to boot up... After that go developer settings -> turn ON usb debugging... Now in PC, run adb via commandline and run adb reboot bootloader... Now see if it goes to droidboot...
This is what I find in bootloader mode. Why can't it go in to droidboot?
IFWI Version: 64.25
SERIAL: E60KBC383526
DROIDBOOT VERSION: TW_FONEPAD-11.2.3.18.2-20141022
PRODUCT: K012
Following Firmwares:
UL-K012-WW-11.2.3.18.2-user.zip
UL-K012-WW-11.2.3.33-user.zip
I tried the old version but to no avail. Also the latest!
Thanks!
Jabbacks said:
This is what I find in bootloader mode. Why can't it go in to droidboot?
IFWI Version: 64.25
SERIAL: E60KBC383526
DROIDBOOT VERSION: TW_FONEPAD-11.2.3.18.2-20141022
PRODUCT: K012
Following Firmwares:
UL-K012-WW-11.2.3.18.2-user.zip
UL-K012-WW-11.2.3.33-user.zip
I tried the old version but to no avail. Also the latest!
Thanks!
Click to expand...
Click to collapse
This is the droidboot.... You can now connect your tab to PC and issue fastboot commands to it.... For example: Fastboot erase cache
But for heaven's sake please don't install lollipop update.....
Now try this: Fastboot erase cache
Fastboot erase userdata
Now choose reboot....
See if it boots up....

I lost my official running system

My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?
Return to official
Simpro said:
My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?
Click to expand...
Click to collapse
If you already downloaded official firmware for your model, put it on root folder on your sdcard or internal memory, in folder named "dload" (without quotes). It should contain two files: recovery.img and UPDATE.APP. Then turn off your phone, and turn it on with holding Power+Volume Up+Volume Down. Wait for install to finish, it will reboot itself when done. You will lose all your data on internal storage and root, so you will need to install TWRP and SuperSU again if needed.
What if it stuck again in twrp like the first time ?
Simpro said:
What if it stuck again in twrp like the first time ?
Click to expand...
Click to collapse
Recovery.img in dload folder will replace TWRP with default Huawei recovery. Also, i was stucked in earlier TWRP recovery, with version 3.0.2-0 it was ok.
If you don`t have need for root, rom will work with default recovery.
Ok thank you i will try it
Where i can find a stock firmware for gx8 (i'am from morocco)
Simpro said:
Where i can find a stock firmware for gx8 (i'am from morocco)
Click to expand...
Click to collapse
Hm, not sure, regional Huawei website for Morocco doesn't list GX8, you could try with rom from this forum: https://forum.xda-developers.com/gx8/how-to/g8-g7-plus-official-roms-europe-t3294362 .
it will be in middle east like my device
http://consumer.huawei.com/kw-en/support/products/downloads/detail/huawei-g8-kwen.htm?id=84325

Roll Back to MarshMallow [BLN-L22]

Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.
suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.
Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse
honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro
honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.

How to downgrade Realme X to Android 9/ Color OS 6 from Android 10 /Realme UI?

Hello devs,
I upgraded my Realme X to android 10 using OTA.
Although there are no serious bugs, the UI has minor glitches now and then. But the camera has lost its quality significantly. It is taking comparatively bad photos now when compared to Android 9.
Can You kindly write a guide on how to downgrade to Android 9? It will be really appreciated.
Thank You in advance.
@SagarMakhar @gritik95 @indroider
Download Stock rom released on 19th Feb and flash it manually if your bootloader is unlocked or if you have custom recovery
rupeshmaurya35 said:
Download Stock rom released on 19th Feb and flash it manually if your bootloader is unlocked or if you have custom recovery
Click to expand...
Click to collapse
Bootloader is locked. Can't I flash older versions?
I have the same query. Any help would be highly appreciated.
Bootloader is locked. I just purchased the phone and upgraded to Realme UI. Now I want to downgrade to colorOS so I can either use it or flash the phone to other ROM(s) which is completely impossible as of now in Realme UI.
U can unlock bootloader using In depth test app and adb but u can't use TWRP because TWRP is not supported in android 10.
What about fastboot? Can we flash Android 9 using fastboot? Have you successfully downgraded?
ShattrdChain said:
Hello devs,
I upgraded my Realme X to android 10 using OTA.
Although there are no serious bugs, the UI has minor glitches now and then. But the camera has lost its quality significantly. It is taking comparatively bad photos now when compared to Android 9.
Can You kindly write a guide on how to downgrade to Android 9? It will be really appreciated.
Thank You in advance.
@SagarMakhar @gritik95 @indroider
Click to expand...
Click to collapse
Hi
I've bricked my realme x and that lead me to start searching ow to unbrick it, and with that i can tell you there's a way to make a downgrade of the android version.
The first thing you need to have is the .ofp file of the software version you want (if you have the india/global version you will not have any problem finding it, but if you have the chinese version you probably could not find it *i've been searching a lot for this file, if you find it, please let me know*)
once you have the ofp file you need the flashing tool of oppo, known as msmdownload tool, the issue with this is the tool will ask you for username and password, because its for oppo workers, and a lot of patched versions don't reconize the file.
If you made this far its pretty simple, select the ofp file, connect the device pressing volumen + and volumen -, and push in the icon of flash.
you can do it in another way, unlocking the bootloader (theres a tutorial in this forum), and then flashing a recovery (you migth flash a custom rom first via adb/fastboot) a zip file with the twrp, and then using the flashable zip of color OS
I hope this help you, but if you're not very mastered in this i reccomend u let realme work of improving the rom or using a gcam
Irvinukis said:
Hi
I've bricked my realme x and that lead me to start searching ow to unbrick it, and with that i can tell you there's a way to make a downgrade of the android version.
The first thing you need to have is the .ofp file of the software version you want (if you have the india/global version you will not have any problem finding it, but if you have the chinese version you probably could not find it *i've been searching a lot for this file, if you find it, please let me know*)
once you have the ofp file you need the flashing tool of oppo, known as msmdownload tool, the issue with this is the tool will ask you for username and password, because its for oppo workers, and a lot of patched versions don't reconize the file.
If you made this far its pretty simple, select the ofp file, connect the device pressing volumen + and volumen -, and push in the icon of flash.
you can do it in another way, unlocking the bootloader (theres a tutorial in this forum), and then flashing a recovery (you migth flash a custom rom first via adb/fastboot) a zip file with the twrp, and then using the flashable zip of color OS
I hope this help you, but if you're not very mastered in this i reccomend u let realme work of improving the rom or using a gcam
Click to expand...
Click to collapse
But how can u flash custom recovery in android 10. As i know TWRP or any other custom recovery are not fully developed for android 10 .
rupeshmaurya35 said:
But how can u flash custom recovery in android 10. As i know TWRP or any other custom recovery are not fully developed for android 10 .
Click to expand...
Click to collapse
you have to flash the recovery after flashing another rom
thats why i suggest you flashing a custom rom via ADB and then flashing the color os rom
Irvinukis said:
you have to flash the recovery after flashing another rom
thats why i suggest you flashing a custom rom via ADB and then flashing the color os rom
Click to expand...
Click to collapse
It is very simple if you say "I DON'T KNOW"

need android 10 stock recovery

Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Nihat2003lol said:
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Click to expand...
Click to collapse
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
n70shan said:
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
Click to expand...
Click to collapse
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Nihat2003lol said:
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Click to expand...
Click to collapse
cant find any fastboot rom for android 10 indonessian
n70shan said:
cant find any fastboot rom for android 10 indonessian
Click to expand...
Click to collapse
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Nihat2003lol said:
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Click to expand...
Click to collapse
only android 9 fastboot available , android 10 fastboot download links are broken
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
You can install orange fox recovery because it support ota update and then you never need to worry about ota updates.:laugh:
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
Download & flash this within LR.TWRP bro: https://bigota.d.miui.com/V11.0.2.0...DGlobal_V11.0.2.0.QGGIDXM_b57de5267e_10.0.zip
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Rakesh Mahto said:
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Click to expand...
Click to collapse
is that possible to use stock recovery from indian device for Indonesian device?
.

Categories

Resources