Poweramp and px3 - MTCD Android Head Units General

Hello there. have a nice day. In my car listening to music with poweramp does not turn off during the phone call with bluetooth. So the music doesn't stop. I have activated the bluetooth option but still continue. I use in the car radio, dasaita px3 and 7.1.2 Android version. v2.95 mcu version.

Hello, I have the same problem as described by you...
Did you find a solution?

solved with new update. I am using the beta version.

Related

[Q] Car Bluetooth Audio Problem

I have a LG Nitro HD running on AT&T. The phone came pre-loaded with 2.3.5. The bluetooth phone part works as I can make and receive calls with my car (Suzuki Kizoshi 2010), but the audio over bluetooth doesn't work. The phone part works as I can make and receive calls. This is very important for me to be able to play the audio over bluetooth as I have a long commute to work and like to listen to my music. Any help is greatly appreciated. Thank You.
It's been about a month and still no solution. Has anyone else come across this problem?
I do not have this problem. I have a Pioneer X930BT headunit in my car and my Nitro streams audio over bluetooth (A2DP) to it perfectly as well as phone calls.
Have you tried streaming Sirius or spotify over bluetooth? I found that the only app on the phone that streams audio to my car correctly is the pre-installed audio app that comes with the phone.
I can confirm google music and napster stream great over bluetooth. I have not used spotify or sirius for android.
Are you sure your car supports audio profile?
I stream spotify, tunein radio every day through bluetooth.
Spotify actually pauses when bluetooth connection is lost which is great for getting out of the car. I wish TuneIn would do it.
Sent from my LG-P930 using Tapatalk
I have had the same problem with my nitro, it will automatically connect the phone but the media (A2DP) seems to drop automatically after connection. I've found if I manually re-connect to the receiver both will stay connected.
(settings > Wireless & Network > Bluetooth settings > *tap device name*)
I, like you, use it every time I'm in the car so it's annoying but it's a fix until there is a valid solution like a update or properly built rom.
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
theoski said:
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
Click to expand...
Click to collapse
That seems to be your problem JoTomlin and Kaiser. Before I installed my new headunit in my subaru I had tons of issues with my captivate playing music over bluetooth because the car had seperate profiles for A2DP and handsfree. When I got my new headunit which has a single profile containing both A2DP and handsfree it all worked without headache on the captivate and now the nitro. This is a problem with your car stereo. If its anything like my subarus, it would prefer to connect to handsfree and it would have to physically disconnect handsfree to connect A2DP (I would have to manually connect via the bluetooth menu). I solved it by getting a tunelink bluetooth audio receiver so handsfree would connect to the stereo and to the tunelink at the same time. Eventually I got tired of that and bought a new headunit.
Apparently a lot of people have swapped out their factory Kizashi factory head units for something better. But again, you'll want to bug Suzuki about something like this.
FWIW, I can stream Pandora just fine over a VW headunit with factory bluetooth. I do have to sometimes to a reconnect/pair though.
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
JoTomlin509 said:
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
Click to expand...
Click to collapse
Did you factory reset after updating?

Problem with car stereo after lollipop update

Hello everyone,
I have just updated my At&t Galaxy note 4 to lollipop a couple of weeks ago and I have lost the ability to skip tracks from my Pioneer DEH-P8400BH car stereo, while connected through Bluetooth to my note 4. I have tried with the stock music player and Playerpro and nothing happens when I skip a track back or forward. I don’t have any lock screen software and I have a Gear 2 always connected to my phone that can skip tracks without issues.
Please I need some help, it’s very annoying and not to mention dangerous to deal with my phone while I am driving.
Thanks,
I use google music and I have never had that problem. I use my steering wheel controls and can skip tracks without a problem. If you created that Bluetooth connection before the LP update, I would unpair the devices and re-pair them. If that doesn't work, consider a factory reset if you haven't already. Many people fixed lots of problems after the update by doing a factory reset.
This is a new LP Bluetooth music issue that I've never heard of. Just a suggestion:
If your Pioneer has updatable firmware (if it's aftermarket, it might. You didn't specify whether it was stock or aftermarket), then make sure it's updated. Otherwise report the problem to Pioneer.
Sent from my SAMSUNG-SM-N910A using Tapatalk
It's probably a Pioneer firmware issue. I have two cars, one has an AVIC X930bt in it and the other is a Lexus with factory stereo. On the Lexus, everything has been smooth sailing but on the t-bird with the Pioneer after market, I noticed it no longer works to change spotify songs using the head unit as I could before.
I also have the issue with my Pioneer stereo in my car...
I have updated my car stereo and that fixed my problem.
Thanks for the tip.

Nougat smartphone to RK3188 MTCC bluetooth for calls

One last cry for help before I drop-kick my head unit into the lake!
Do you have an MTCB or MTCC RK3188 HU that connects via bluetooth to an android 7.1 (Nougat) smartphone and allows you to make/receive calls via the HU?
If you have, what HU ROM are you using and do you need any additional apps to make it work?
I have an MTCC RK3188 HU which worked perfectly with my Xperia Z3 for calls over bluetooth but I can't get it to work with my Xperia XZ Premium and I've tried loads of ROMS, MCUs and bluetooth/MTC service apps.
Desperate! Help! Please!
I don't have the quad core rk3188, but I have the dual core rk3066 headunit(MTCB-JY). I did sync my nougat phone (Oneplus One on CyanogenMod), and answered a phone call through the stereo. I had my mom call me to test it. She said it sounded like I was far away from the mic (using the built-in mic on the front of the HU),I was less than an arms length away from the HU. 08122014
The headunit is using the stock shipped rom with a build number of 08122014 running 4.4.4, MCU 2.16. I used the Bluetooth app that was installed on the HU to sync the phone and connect the phone to the stereo. I didn't try calling out, but I answered a call using the stereo. The phone played it's ringtone, but the stereo did a normal phone ring.
I did just update my HU using the Malaysk rom build for my stereo and updated my MCU to the highest version. I haven't tested the phone capabilities yet.

Poweramp problem

Hello friends. I have mtcd px3 dasaita multimedia and android 7.1.2 version. I use agama car launcher. I use it with the poweramp program. The problem is. poweramp does not turn off when you make any phone calls. I turn off the sound from the focus, but again the poweramp does not turn off. I would be glad if you could help for the solution.
problem is solved. I contacted poweramp official. settings - sound- disable direct volume control. the problem has improved.

Strange No Sound Issue

Hi guys, hoping you can assist...I've had an Xtrons unit installed in my Audi TT for about a year now. One day as I was driving, I was listening to music from my phone via A2DP. Midway I switched my phone to my bluetooth headphones so I could listen on those in one ear. It seems the phone stayed paired to the head unit but the music was coming through the earpiece fine, no sound off the headunit.
Ever since that day, I've had no sound coming out of the head unit at all. I've done a factory reset, unpaired any bluetooth devices, and just tried listening to radio, but no sound comes out at all. I thought maybe the amp fuse was blown so checked that and it isnt that. I've pulled the unit forward and no cables are loose
I've contacted Xtrons to try and see if there's a new firmware in the hope that will fix it. My current build is shown below.
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20181206.171300 test-keys
Has anyone else experienced this? I'm hoping its a software issue and something didnt blow inside the unit itself. Everything else works fine, just no sound
Here you are a complete repository for mtcd units.
Select px5 and android 8 (oreo). Select any manufacturer (all rom are compatible)
Яндекс
Найдётся всё
disk.yandex.ru
Perhaps you need to upgrade your mcu as well.
Check on the repository or on xda forum for your specific manufacturer mcu upgrade

Categories

Resources