Durable clear case that doesn't stain or yellow? - Google Pixel 3 XL Accessories

I am looking to find a nice, durable clear case for the XL. I've had a couple cheaper TPU cases in the past, but they were not very durable and after a while would get kind of gross and even begin to discolor. I am leaning towards picking up the Lifeproof Next and am wondering if anyone has it and like it or if there might be some other good options out there?

I prefer the ones with the PC back instead of tpu since they don't yellow. I've got the ringke and caseology ones which are both good. there are a ton of options on Amazon/eBay/AliExpress, a lot of times they'll come up under a search for bumper

Ringke Fusion but get the smoke black instead of the clear. It's still clear but with darkened edges so it hides any discoloration much better.

I've been using this one for a couple weeks and so far/so good...$10 on Amazon...

kerobrat said:
I've been using this one for a couple weeks and so far/so good...$10 on Amazon...
Click to expand...
Click to collapse
good to hear that one is good, i shied away because of all the fake reviews and got a ringke fusion.

kerobrat said:
I've been using this one for a couple weeks and so far/so good...$10 on Amazon...
Click to expand...
Click to collapse
That looks just like my Caseology Waterfall Series case and one that I saw on AliExpress. I've been happy with mine so far and wireless charging is fine. We'll see how well it ages and resists yellowing or hardening.

The hard back on it is a total fingerprint magnet, like it gets downright greasy sometimes, which is actually pretty gross ?
But, I tend to just wipe the back across my jeans if it gets gross and it doesn't show a single scratch yet, and not a bit of discoloration that I can see, like 3 weeks in now. For $10 I'm very happy with it.

Don't know if you picked anthing up yet but I have had great success with the RINGKE CLear Fushion on every phone I have owned inlcuding the Pixel 3XL - excellent case. Good Luck

Related

Roocase Ultra Slim Leather Case for 10.1 Review - Pics Heavy

I received this today in mail from PC Micro. They had coupon for 20% off tablet accessories so ended up to be $26 shipped.
Here is my brief review, and I'll let pictures do the talking.
Build quality: Probably the best I have used for any case. I'm pretty frugal guy, I wouldn't pay an arm or leg for cases but this is one of the very best. It's genuine leather, thus it smells great and feels great. None of that cheap PU leather cases come even close.
Protection: I feel pretty safe with the Gtab 10.1 in this case. Obviously, it's less protection than the thicker cases but this is more than enough for most people's daily use.
Accessibility: All ports are cut out perfectly. Obviously you can't charge with the folio flap close, so you have to charge it with it open. It's also a thin case, so when you are trying to touch the lower borders of the tablet, the rim of the case wouldn't become obtrusive.
Others: There is a velcro flap to keep the tablet in the case so it wouldn't slide out with the case open. A very nice touch IMO. Also there is no magnet for closure. I purposely wanted a case without magnet, so this may be pro or con based on user preference.
Overall: 9.5/10 (I don't give 10/10s). This is as good a case you can get. Don't look any further.
Hi Gordec, thanks for your brief review.
Could you maybe expand it a bit more with your experience as far as using it as a stand? In both modes, for typing and vertical for viewing media or browsing?
Roocase
My friend had one for his Ipad(allple Suck)but the case was nice so I bought one for my galaxy and it was great ...love it made a great addition.
I just got the ultra slim case today and its amazing i dont like the leather one because it covers the bezel around the screen nd it kinda gets in the way with the screen but this case is amazing.. The ultra Slim one..
I just received this case yesterday and must say that I am pleasantly surprised. I was afraid that the advantages of a case would not outweigh the added thickness and weight. However, what makes this case so great is the stand feature. It is so easy to use and type on the tablet when it is perked up on your lap or on the table in front of you. If you are on the fence I'd recommend this case 100%.
Edit: I have the "multi-angle" one (search Amazon)
I have been using this for a few weeks now. It's is a nice little case. Workmanship is vastly better than the comparably priced Acase I returned when the stitching started unraveling.
I dunno if this has happened to any of you guys but after having this case for about 2 months now, I decided to take the tablet out and give it a clean. Lo and behold I noticed that the case has discolored the back of the tablet. I have tried using alcohol to clean it with a cloth but no dice. Anyone else got this?
saltbread said:
I dunno if this has happened to any of you guys but after having this case for about 2 months now, I decided to take the tablet out and give it a clean. Lo and behold I noticed that the case has discolored the back of the tablet. I have tried using alcohol to clean it with a cloth but no dice. Anyone else got this?
Click to expand...
Click to collapse
Yup I got this! Tried the same things you did. Guess this is the price we pay for getting a cheap case -_-
saltbread said:
I dunno if this has happened to any of you guys but after having this case for about 2 months now, I decided to take the tablet out and give it a clean. Lo and behold I noticed that the case has discolored the back of the tablet. I have tried using alcohol to clean it with a cloth but no dice. Anyone else got this?
Click to expand...
Click to collapse
bskim23 said:
Yup I got this! Tried the same things you did. Guess this is the price we pay for getting a cheap case -_-
Click to expand...
Click to collapse
Rats! I have been using mine for three weeks and this has not happened yet. Should I just nip this in the bud and move to a better case? Any suggestions as to a good upgrade? I'd prefer something thin.
I don't have a recommendation for you other than to warn you to get another case before yours becomes discolored like ours.
saltbread said:
I don't have a recommendation for you other than to warn you to get another case before yours becomes discolored like ours.
Click to expand...
Click to collapse
OK, thanks. I just ordered this case from amazon:
http://www.amazon.com/Infinite-Adju...P6/ref=sr_1_11?ie=UTF8&qid=1314814140&sr=8-11
Will post my impressions when I get it.
Cool, looking forward to it
I know this is an old thread but I just wanted to add that I have this case and have been using it for about three months now. I just checked the back of my Tab and it's pristine. I have the metallic gray back though, not the white plastic. It's a really great case-if you have the metallic back, don't let the complaints scare you-it looks like the discoloration only happens to the white plastic ones.

PureGear Slim Shell Case

Does anyone know where I could find some reviews of this case? Been holding off buying a case for a way too long and this looks promising
http://www.pure-gear.com/shop-by-ca...case-for-samsung-galaxy-s-iii-collection.html
Would anyone know where I could buy the coconut jelly version in the uk? I would be willing to make a video review on my youtube channel: youtube.com/polesp as a payment
I was waiting for the Musubo cases to come out, but decided to pull the trigger on the PureGear Slim Shell instead. I ordered the Black Tea one from this seller on eBay: http://www.ebay.com/itm/PUREGEAR-SA...t=LH_DefaultDomain_0&var=&hash=item2573f30cba
At $22.75 and free shipping, this is the lowest price I was able to find. It's out for delivery today, so I'll post a quick review within the next couple of days. I'm currently using a CruzerLite TPU case, as I'm not a big fan of dual layer (i.e., Otterbox, Ballistic, etc.) cases. The PureGear certainly seems like an interesting option.
kgbkny said:
I was waiting for the Musubo cases to come out, but decided to pull the trigger on the PureGear Slim Shell instead. I ordered the Black Tea one from this seller on eBay: http://www.ebay.com/itm/PUREGEAR-SA...t=LH_DefaultDomain_0&var=&hash=item2573f30cba
At $22.75 and free shipping, this is the lowest price I was able to find. It's out for delivery today, so I'll post a quick review within the next couple of days. I'm currently using a CruzerLite TPU case, as I'm not a big fan of dual layer (i.e., Otterbox, Ballistic, etc.) cases. The PureGear certainly seems like an interesting option.
Click to expand...
Click to collapse
Thank you! there are virtually no reviews out for this case which one are you getting? if it is the coconut jelly one would you be able to comment on whether the clear back leaves any marks on the back of the s3 (those big bubbles you get when plastic touches something), as postage to the UK takes 30 days your help is really appreciated
I was considering both Coconut Jelly and Black Tea, and ended up going with Black Tea. I know exactly what marks/bubbles you're referring to - my wife is using a CruzerLite translucent green TPU case on her white GS3, and the bubbles on the back are a bit unsightly. I came across a post on a different thread, where it was suggested to spread a small amount of talcum powder inside the case prior to putting it on the phone. Supposedly, it completely eliminates the bubbles.
We sell this case in store at TMobile ... they sell out fast... pretty nice case and a very functional holster
Just seeing if anyone has purchased one of these cases and how they compare to a diztronic or SGP color hybrid.
Thanks,
i wanted to buy this but kinda worry about the grippy rubber will easily get dirt and not washable. Also, how come there is no passion fruit color at all?????
Forget the case, look at the screen protector. Damn genius design...
looks real nice.
I like the Black Tea. Passion Fruit would've been soo much better had it had green trim rather then the blue.
I received my case and am definitely liking it so far, despite a couple of minor imperfections. I'll post a review this weekend, when I have the time to sit down and write one up. All in all, I give the case 8.5/10.
The rubber is hard, not the grippy kind. It doesn't trap dirt at all. The case is far superior to the CruzerLite TPU case that I've been using previously.
@Goobacks:
I agree, the design of the roll-on screen protector is absolutely genius. However, $25 is a bit too hefty.
kgbkny said:
I received my case and am definitely liking it so far, despite a couple of minor imperfections. I'll post a review this weekend, when I have the time to sit down and write one up. All in all, I give the case 8.5/10.
The rubber is hard, not the grippy kind. It doesn't trap dirt at all. The case is far superior to the CruzerLite TPU case that I've been using previously.
@Goobacks:
I agree, the design of the roll-on screen protector is absolutely genius. However, $25 is a bit too hefty.
Click to expand...
Click to collapse
did you get the coconut jelly clear version?? when u say the rubber is hard, is that the back too? will this prevent those unsightly bubbles?
thanks
I am looking at this case and wonder how everyone that got them likes it? Is it a slippery case? Holding up well?
grillheadxl said:
I am looking at this case and wonder how everyone that got them likes it? Is it a slippery case? Holding up well?
Click to expand...
Click to collapse
In the event you come back to this thread, my case is holding up like a champ. They are available on Amazon for around $15 nowadays, and it's definitely worth the money. I got the orange one for my wife, who always keeps her phone in her purse, and the edges accummulated black scuff marks all around the sides of the case. I have the black tea one, and it still looks the same as it did the day I bought it. Then again, I don't have a purse!
Not a bad case not real grippy got the coconut jelly ( clear ) I don't recommend the color it looks like it has 3 cracks ( really small ones ) rite above the 3 slots for camera speaker and flash but not bad for paying 17 bucks with shipping from cell guru
sent from the samsung galaxy airplane (i747)
kgbkny said:
In the event you come back to this thread, my case is holding up like a champ. They are available on Amazon for around $15 nowadays, and it's definitely worth the money. I got the orange one for my wife, who always keeps her phone in her purse, and the edges accummulated black scuff marks all around the sides of the case. I have the black tea one, and it still looks the same as it did the day I bought it. Then again, I don't have a purse!
Click to expand...
Click to collapse
Hi, I read a comment on Amazon about the white one where the reviewer says that the nubs didn't stop the case from scratching when the phone vibrated. Do you or your wife see this problem?
Thanks
trying to decide between this case and the incipio silicrylic
Ive heard not so good things about this case
Sent from my Galaxy S3 using neighbors wifi
1slow4G said:
Ive heard not so good things about this case
Sent from my Galaxy S3 using neighbors wifi
Click to expand...
Click to collapse
Ya Im setting mine aside as a back up case and using my casemate pop volume button r real responsive but the power button is kinda hard to press has lots of rough sharp edges at case seams and real very cheap and slippery
sent from the samsung galaxy airplane (i747)

HTC One Diztronic TPU Case Review

Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
nice thanks !
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
HotInEER said:
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
Click to expand...
Click to collapse
Yeah the Poetic cases look great. I'll be picking some up soon and reviewing those as well.
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
pokey9000 said:
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
Click to expand...
Click to collapse
Yeah, I got my first one back when I had my Galaxy Nexus LTE. After being happily surprised I got both the hard shell and TPU for my Nexus 4 and will be using this one on my future HTC One. Hopefully sales are good enough for the TPU that they release a hard shell case.
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Gja88 said:
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Click to expand...
Click to collapse
I doubt it will grey over time. I've never had it happen to me on any case.
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
dxwilliams40 said:
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
Click to expand...
Click to collapse
Yeah I'm scared to make the switch to HTC and sense since I've had stock since the gnex lte but I've never owned an HTC device and I always thought sense looked nice. I've heard so many bad things about it that it has me worried, but I guess I've gotten bored of pure stock for a bit and its time to try something new. Either way I can't wait to try it out. Hopefully its worth it!
Sent from my Nexus 4
I got my Diztronic Gray TPU case today, and since I've been using the HHI (purchased from that $0.99 sale last week) I figured I'd share the differences having them both in hand.
As I said above, I had a Diztronic TPU on a previous phone and enjoyed it although it had a few flaws (excess molding flash around buttons, missing NC mic hole). Being a tightass I jumped on the cheap HHI case deal, figuring I'd take a chance on other manufacturers matching that same quality.
And I was rewarded for my cheapness with a cheap case. The HHI case has two big problems as far as I'm concerned. The cutout for the power button is pill shaped, following the contour of the button and projecting upwards away from the case. It doesn't leave much room for a finger to press, especially when trying to use your index finger when one-handing it. I remedied this with an X-Acto and a soldering iron to smooth the cut, opening up the button hole towards the back of the case. More troubling though is the fit around the front of the case. HHI managed to get the back of the case to fit the curves of the One nicely. However they didn't account for the bevel around the One's bezel. The side effect of this is that the corners don't stretch the front portion enough, leaving the sides to bow out a couple of mm at the center of each side. I don't think this would affect the function of the case in an impact, but at best it ruins the straight line aesthetic of this phone. One lesser annoyance is the molding seam that runs the entire perimeter, which isn't distracting to the touch but is very obvious against the transparent side pieces.
The HHI seems like it would be a functional case from the aspect of being protective: it covers the corners with shock absorbing TPU and protects the bezel where it counts. It goes in and out of pockets easily and the matte clear blends well with the color of the silver phone.
Today the Diztronic came in and the extra $11.51 proved well worth it. The Diztronic case fixes both of the issues I had with the HHI: the power button cutout is nearly flush with the button at the front and back, making it easy to push, and the front fits snug and stays straight along the edges. Like the HHI, the cutouts all line up ok, and while it doesn't make a functional difference the camera cutout is centered maybe 1mm too low. Unlike the HHI, the molding seams are small and in the corners. My previous TPU case experience was with a black case, so time will tell if I'll see this one turn yellow after a few months. If that happens (and supposedly it's inevitable with clear TPU) I'll buy the black version without hesitation.
TL;DR: The HHI and Diztronic TPU cases both do their jobs, but the Diztronic is well worth the extra money for the fit and finish.
Nxxx said:
Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
Click to expand...
Click to collapse
SH*T. lol i just spent awhile putting a video together for these cases. hahaha
http://www.youtube.com/watch?v=czwrO4AWlQ0&feature=youtu.be
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
fightr said:
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
Click to expand...
Click to collapse
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
beforedenied said:
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Haha 'tis is true but I remember I got my HTC One S case for approximately $7 or so but
nevertheless I am quite content with this case! I just recieved it today, so far so good. I was a little concerned that it would cover the camera a little as the cutout looks really tight and possibly even touches the lens but it actually doesn't affect the pictures which is fine for me!
Otherwise I'm liking it! I feel like it is definitely a little more protected than it would be naked but slim enough to not make much of a difference although I do miss the aluminum unibody feel a little..
Just to add, definitely not going to protect much from a crazy fall or anything but I already knew that when I decided to purchase it.
Purchased this case after seeing everyone's reviews here. Thanks everyone!

Thinnest clear case?

Looking for the best case to show off the Moto X, so I'm trying to find the thinnest clear (not frost!) case out there. Not worried about drops, just want basic scratch and scuff protection.
For reference, I have the Diztronic TPU clear case and the Minisuit clear case, but am looking for something more minimalist that will LEAST change the look of a naked X. Has anyone seen such a case?
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
I bought the Griffin Reveal Case. It has the clear back and is pretty thin. It's hard plastic with a softer rubber around the edge. The back scratches fairly easy, but I do not see them unless I take the case off and look for them. I had read this in reviews, but I'll live with it for the $12.50 I paid from their ebay store (price is higher now on ebay, though cheaper than amazon with shipping).
Ebay link
or
Amazon
I originally had a clear diztronic tpu case, which added a lot of bulk IMO. The Reveal case keeps more of the original feel of the phone.
Mayze23 said:
I have the clear power support air jacket case. It's kinda expensive but it's thin & it has some sort of self healing coating that heals scratches. The only downside is that it makes your phone slippery.
Click to expand...
Click to collapse
do the scratches actually "heal"? I'm getting this case tomorrow, I'm undecided if I want to keep it or get another one...
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Mayze23 said:
I haven't scratched it on purpose to see but I've used it for a couple of weeks now and there are no visible scratches.
Click to expand...
Click to collapse
Same here. Been using it 2-3 weeks and there are zero scratches.
I have found, like others have said, that it is very hard to get off. It's a breeze to get on though.
Are there any truly transparent TPU cases? The Diztronic is frosted
Rocketfish TPU Case from BestBuy
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
I've been using the AirJacket for a while and really like it. As others have said, no visible scratches, good protection, and it doesn't feel particularly slippery to me. Also doesn't add much bulk. I don't like what it does to the feel of the buttons. Where before they were good and "clicky", now it's mushy, hard to press, and doesn't always respond. I've taken to pressing on them horizontally with my thumbnail instead. Could be I've had bad luck with mine, but I have been tempted to try modifying the buttons (scraping away some rubber to thin them out).
Hey guys!
Now I'm waiting for my walnut Moto X and trying to choose between Rocketfish TPU case and Air Jacket by Powersupport. Price doesn't matter on me. Understood from forums that air jacket has some self-healing coatin and dunno abt same issue in Rocketfish case.
What you guys think about it? What case might be your choise?
Thanks beforehand.
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
tgerbracht said:
I think the two tone air jacket is not very appealing but it's all personal taste. If the rocket fish is like the diztronic but clear I'd go with that
Click to expand...
Click to collapse
Thanks for feedback!)
Already ordered air jacket + non-glair film. Will make photoes upon delivery
I got a LUVVITT from amazon. TPU sides and Polycarbonite clear back.
I like it so far. It does seem to show minor scuff and scratches on the back though.
samarth1 said:
What you need is the Rocketfish TPU case from BestBuy. It's what I've been using from day 1 of owning my Moto X, and it's pretty fantastic. 100% clear all round, and great to the touch. Covers the buttons as well, and has a good lip around the edges so you can put it face down. Go for it, you won't be disappointed. I'm surprised this case doesn't get as much publicity around here as it should.
http://www.bestbuy.com/site/soft-sh...&skuId=1645012&st=rocketfish moto x&cp=1&lp=1
Click to expand...
Click to collapse
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
Thank you. The buttons are hard to press as well. I will return it tomorrow. I will probably go naked.
Sent from my Nexus 7 using Tapatalk
yamaha83 said:
thats the case i have but after using for a while its now discolored with a yellow hue and some blue from being in my jeans pocket.
Click to expand...
Click to collapse
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Please do
The rocket fish case looks great, the buttons are a bit stiff and it is relatively expensive from best buy. Still, it's the best truly clear case I've found.
styndall said:
You know I thought it was my eyes--mine seems to be looking a bit yellow too! Nice to see someone else has the problem and I am not seeing things. Dang it, I like this case too... Maybe I will try to soak it in something...like oxyclean or I don't know... something! If I am able to remove my yellowness I'll report back!
Click to expand...
Click to collapse
Good luck, but don't be hopeful. I've had clear TPU yellow before. I think it's a chemical reaction from either light exposure or skin oils. I tried everything and it doesn't 'clean' up at all.

Accessories AliExpress Ultra-Thin Matte Hard Case for Pixel 6 Pro

https://imgur.com/a/zzQwwe0
Just got this ultra thin matte hard case for the Pixel 6 Pro. I like super thin cases made by MNML Case and Peel, but they are expensive and not hard so they expand and become useless.
This AliExpress case snaps on and overs no protection from drops, but I like it, super thin and great feeling, not slippery.
My P6P is the Cloudy White and I got the transparent case. They have several different colors including Yellow and Blue. Super cheap and took 11 days to ship even though estimate was several months! I currently own the Google Case, Spigen Ultra Hybrid and now this one. I returned the Spigen, will keep the Google Case for when I travel, and use this AliExpress one for daily driver.
This is the link to the case: https://www.aliexpress.com/item/1005003432204266.html
EDIT: I apologize for not cleaning my phone before taking photos.
nxt said:
https://imgur.com/a/zzQwwe0
Just got this ultra thin matte hard case for the Pixel 6 Pro. I like super thin cases made by MNML Case and Peel, but they are expensive and not hard so they expand and become useless.
This AliExpress case snaps on and overs no protection from drops, but I like it, super thin and great feeling, not slippery.
My P6P is the Cloudy White and I got the transparent case. They have several different colors including Yellow and Blue. Super cheap and took 11 days to ship even though estimate was several months! I currently own the Google Case, Spigen Ultra Hybrid and now this one. I returned the Spigen, will keep the Google Case for when I travel, and use this AliExpress one for daily driver.
This is the link to the case: https://www.aliexpress.com/item/1005003432204266.html
EDIT: I apologize for not cleaning my phone before taking photos.
Click to expand...
Click to collapse
I like it, but, I wish the edges were black.
I ordered a similar case from eBay, but, it's all black, just made its way stateside earlier today, should deliver by the end of the week.
nxt said:
https://imgur.com/a/zzQwwe0
Just got this ultra thin matte hard case for the Pixel 6 Pro. I like super thin cases made by MNML Case and Peel, but they are expensive and not hard so they expand and become useless.
This AliExpress case snaps on and overs no protection from drops, but I like it, super thin and great feeling, not slippery.
My P6P is the Cloudy White and I got the transparent case. They have several different colors including Yellow and Blue. Super cheap and took 11 days to ship even though estimate was several months! I currently own the Google Case, Spigen Ultra Hybrid and now this one. I returned the Spigen, will keep the Google Case for when I travel, and use this AliExpress one for daily driver.
This is the link to the case: https://www.aliexpress.com/item/1005003432204266.html
EDIT: I apologize for not cleaning my phone before taking photos.
Click to expand...
Click to collapse
Clicked on link and case isn't showing up, want that exact case and can't seem to find
cmarkortiz said:
Clicked on link and case isn't showing up, want that exact case and can't seem to find
Click to expand...
Click to collapse
Link works for me.
Case looks good, I parked this also in my shopping list a few days ago.
For my old P30 Pro I have a similar case, which still looks new after one year of use.
You can see the phone colors, but it doesn't tun yellow...
cmarkortiz said:
Clicked on link and case isn't showing up, want that exact case and can't seem to find
Click to expand...
Click to collapse
AliExpress has been weird for me for a while. Browsing the website, tapping on any product it goes to a different product, tapping on any links goes to that random product. Try this, search for "ultra matte pixel 6 pro"
nxt said:
AliExpress has been weird for me for a while. Browsing the website, tapping on any product it goes to a different product, tapping on any links goes to that random product. Try this, search for "ultra matte pixel 6 pro"
Click to expand...
Click to collapse
Same i click link for product then different products show up. Ill keep searching for the case it shows up but again when i click different product appears
Very pricy but very strong ( Aramid Fiber, aka kevlar ) has shown up on Jeff Bezos' store.
Amazon.com
I'm not saying you should hold up and wave your phone around in a gun fight. That would be really stupid, right ? Maybe only secret agents would have the balls and the spare cash to run this case while working . . .
nxt said:
https://imgur.com/a/zzQwwe0
Just got this ultra thin matte hard case for the Pixel 6 Pro. I like super thin cases made by MNML Case and Peel, but they are expensive and not hard so they expand and become useless.
This AliExpress case snaps on and overs no protection from drops, but I like it, super thin and great feeling, not slippery.
My P6P is the Cloudy White and I got the transparent case. They have several different colors including Yellow and Blue. Super cheap and took 11 days to ship even though estimate was several months! I currently own the Google Case, Spigen Ultra Hybrid and now this one. I returned the Spigen, will keep the Google Case for when I travel, and use this AliExpress one for daily driver.
This is the link to the case: https://www.aliexpress.com/item/1005003432204266.html
EDIT: I apologize for not cleaning my phone before taking photos.
Click to expand...
Click to collapse
ive got 5 cases now and this is the one i keep coming back to. as you mention it wont offer any protection if i drop it but it makes the phone less slippery, feels good and is virtually invisible when looking at the phone front on
skimminstones said:
ive got 5 cases now and this is the one i keep coming back to. as you mention it wont offer any protection if i drop it but it makes the phone less slippery, feels good and is virtually invisible when looking at the phone front on
Click to expand...
Click to collapse
But will it stop bullets ?

Categories

Resources