[ROM][6.0.1][CM]CyanogenMod 13 - Nokia X

Important
Repartition your phone before installing this ROM
https://forum.xda-developers.com/nokia-x/general/tutorial-how-to-partition-nokia-x-xl-t3450079
Working:
Everything
Not working
No FM
offline charge
Before you install:
Clean flash is recommended
How to install:
1.Boot into TWRP 3.1.1 or 2.8.7.0
2.Flash ROM
3.Reboot
4.First boot will take around 10-20min
Note
-Install Kernel Adiutor and change CPU Governor to OnDemand
Download Link:
Discontinued
XDA:DevDB Information
CyanogenMod 13, ROM for the Nokia X
Contributors
Sofiane omega, weritos, Cyanogen
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any
Version Information
Status: Stable
Current Stable Version: 2018-01-20
Stable Release Date: 2018-01-20
Created 2018-12-04
Last Updated 2018-12-04

I wish it worked on xl. I m too afraid to give it a try though..

upload the link...........
please
please
please
please
please

upload the link...........
please
please
please
please
please

Gonna try it later. : )

Where's the patch and the mod?

No patch how we gonna flash this? (( Please upload it

Upload please.
Sent from my NOKIA x using XDA Labs

Update
can be installed without patch or mod ready just read instruction that all

Please give link for the patch!!!

Error 7 when installing with twrp3.0.2 and i used the repartitioning zip.
1. Wiped everything except sd card
2. Flashed the zip
3. Tried flashing rom.
Then error 7 showed up

Hello Sofiane Omega,
First of all, thank you for this amazing ROM for Nokia X. This ROM is faster than the previous Lineage 13 for Nokia X.
For those who could not install this ROM, please read and follow the instructions carefully.
In my case, I could not use builder.prop in the post.
After I installed the ROM, I installed Delta GAPP in this link
I need Google Play to install an app for chating and I could not make MicroG to run Google Play service. So I use Delta GAPP instead.
Any questions about installing this ROM are welcome. I will try to answer as much as I can.
Regards,

shirshak 1234 said:
Error 7 when installing with twrp3.0.2 and i used the repartitioning zip.
1. Wiped everything except sd card
2. Flashed the zip
3. Tried flashing rom.
Then error 7 showed up
Click to expand...
Click to collapse
Try repartition manually from the link in the post. I also could not get the repartitioning zip to work.
You also need TWRP 3.1.1 or may be 3.2.1 to install the ROM.
This ROM is great. Hope you can install it soon.

siamese007 said:
Try repartition manually from the link in the post. I also could not get the repartitioning zip to work.
You also need TWRP 3.1.1 or may be 3.2.1 to install the ROM.
This ROM is great. Hope you can install it soon.
Click to expand...
Click to collapse
Hi @siamese007
Did dual sim work with this ROM?
Anything that you feel not working.
I am thinking about giving this a try soon!

Syncnister said:
Hi @siamese007
Did dual sim work with this ROM?
Anything that you feel not working.
I am thinking about giving this a try soon!
Click to expand...
Click to collapse
The dual sim works fine. I have not tried all of the features. But from my daily use, this ROM is good enough.
The only problem is GAPPs. I am using Delta GAPP. Once I install Delta GAPP, phone is slowing down.
I tried to use A GAPP but the system partition is not enough for this. And I don't know how to re-partition to create bigger system partition.
If someone can modify A GAPP to use with this ROM, it will be perfect. A GAPP is very light and can be used with old phone really well.

siamese007 said:
Hello Sofiane Omega,
First of all, thank you for this amazing ROM for Nokia X. This ROM is faster than the previous Lineage 13 for Nokia X.
For those who could not install this ROM, please read and follow the instructions carefully.
In my case, I could not use builder.prop in the post.
After I installed the ROM, I installed Delta GAPP in this link
I need Google Play to install an app for chating and I could not make MicroG to run Google Play service. So I use Delta GAPP instead.
Any questions about installing this ROM are welcome. I will try to answer as much as I can.
Regards,
Click to expand...
Click to collapse
so regarding build.prop use this file and flash it some problem will get fixed
and for gapps they slow down the phone a lot that why i never used them i download from apkmirror,apkpure or f-droid and you better use lite version of what you want to use (fb lit,m lite,line lite..etc)

siamese007 said:
The dual sim works fine. I have not tried all of the features. But from my daily use, this ROM is good enough.
The only problem is GAPPs. I am using Delta GAPP. Once I install Delta GAPP, phone is slowing down.
I tried to use A GAPP but the system partition is not enough for this. And I don't know how to re-partition to create bigger system partition.
If someone can modify A GAPP to use with this ROM, it will be perfect. A GAPP is very light and can be used with old phone really well.
Click to expand...
Click to collapse
which version did you try i think i could help with that if you tell me

Sofiane omega said:
which version did you try i think i could help with that if you tell me
Click to expand...
Click to collapse
Hello Sofiane Omega,
Thank you for your attention.
I have tried A-GAPPs for Android 6.0.1 in this link.
Before this, I tried microG for GAPP in this link but could not get the Play Store up. I have tried microG on Samsung Galaxy S in this link. This is very light weight. I don't know how the developer create this microG for his build of Samsung Galaxy S1 ROM. The ROM runs very smooth with this microG and I can enter Play store that I need.
Your ROM is very cool. Works best so far for Nokia X. Really smooth for this limited RAM.
Regards, :good::good::good:

siamese007 said:
Hello Sofiane Omega,
Thank you for your attention.
I have tried A-GAPPs for Android 6.0.1 in this link.
Before this, I tried microG for GAPP in this link but could not get the Play Store up. I have tried microG on Samsung Galaxy S in this link. This is very light weight. I don't know how the developer create this microG for his build of Samsung Galaxy S1 ROM. The ROM runs very smooth with this microG and I can enter Play store that I need.
Your ROM is very cool. Works best so far for Nokia X. Really smooth for this limited RAM.
Regards, :good::good::good:
Click to expand...
Click to collapse
sorry but i already tried micro g and i never get signature spoofing to be set true and you could make it work but xposed never did function properly no matter what i did
i used this rom on my x as daily drive with and without gapps if you need gapps flash them but make sure you don't install so much app and don't over do your phone
and i hope you liked the new way your phone look and flash build.prop that i sent you it will correct some problem and fix some bug
thank you for using my rom have great day

Sofiane omega said:
sorry but i already tried micro g and i never get signature spoofing to be set true and you could make it work but xposed never did function properly no matter what i did
i used this rom on my x as daily drive with and without gapps if you need gapps flash them but make sure you don't install so much app and don't over do your phone
and i hope you liked the new way your phone look and flash build.prop that i sent you it will correct some problem and fix some bug
thank you for using my rom have great day
Click to expand...
Click to collapse
OK. No problem.
I may try to repartition to increase system partition for install A-gapp.
Nokia X is very limited resource. I used to try install many apps and the phone brick in the end.
Thank you anyways for the nice ROM. :good::good:

Related

help acro s stable kitkat rom

Can you help me pick what kitkat rom should i use? I want a stable, fast and battery efficiet rom..
shibabz03 said:
Can you help me pick what kitkat rom should i use? I want a stable, fast and battery efficiet rom..
Click to expand...
Click to collapse
Try the mokee rom.... i have been using it... It's stable , fat and battery efficient... can't post the link to the took... Google mokee hikari
Does it still give root too all apps that want it, without asking?
cmr_noob said:
Try the mokee rom.... i have been using it... It's stable , fat and battery efficient... can't post the link to the took... Google mokee hikari
Click to expand...
Click to collapse
hi there.. how to install mokee?? is it just like the other custom rom installation?
wipe data/ factory
wipe cache
wipe dalvik
install zip
are those the steps? or do i need to format system as well?
already downloaded the file but im waiting for the confirmation of the steps..
You don't need to format system... just flash the boot.img and then install it like any other custom Rom... If you need to grant root access to all apps without them asking for it .. You can change the settings in superuser to do that
What version should i install first? Nightly or Release?
cmr_noob said:
You don't need to format system... just flash the boot.img and then install it like any other custom Rom... If you need to grant root access to all apps without them asking for it .. You can change the settings in superuser to do that
Click to expand...
Click to collapse
I went to the website bro. I saw 2 kinds of releases the nightyly and i think the other one is named RELEASE but i assumed it would be the official one they had an update in the nightly version this june 4 So i should just install the official release and OTA to the current nightyly build?
Mekoo seems great. Tried the first unofficial that came. It has improved greatly. Ext_sd is working perfectly.

[Stop dev][Rom][UB][4.4.4_r2.0.1]AOSP[Final version]

This ROM is based of AOSP
As it is AOSP it has next to no extra features but it is very smooth. In this ROM everything should work. HDMI, Radio, and no pause when recording.
Credits:
@deedwar for the source and many helps of compile
@Apology11 for nearly EVERYTHING else
@billchen1977 for the kernel
@MrGezz
Sources:
AOSP Source
Device
Vendor of aoba
Bugs:
You tell me.
Final version:
http://pan.baidu.com/s/1o6vCPsA
Beta5:http://pan.baidu.com/s/1mgl7u32
Beta4:
http://pan.baidu.com/s/1i3rIJ1j
Beta3:
http://pan.baidu.com/s/1jGglj9c
2nd Version:
http://pan.baidu.com/s/1mgl1QJI
Previous Version:
http://pan.baidu.com/s/1jGiifaQ
XDA:DevDB Information
[ROM][UB][4.4.4]AOSP , ROM for the Sony Xperia Ion
Contributors
kin912
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2014-09-27
Created 2014-09-27
Last Updated 2014-09-27
Reserved
Changelog:
1.2014.9.27 1ST Previous version.
2.2014.9.28 2nd version @deedwar
Fix the bluetooth.
Fix the battery.
3.3rd version
Tweak the notification led.
Fix the mobile network.
4.Beta4
Fix the random restart.
5.Beta5
Add SELinux supposted.
Add fsat charger
Add exfat and f2fs supposted.
Add cpu oc to 1.89g
Fix some bluetooth issues.
Some smooth tweaks.
5.Final version
4.4.4.r2.0.1
Fix some pic flash.
More tweaks with the kernel.
Where is the download link???
Is this ROM faster than Carbon ROM? Carbon is the best KK ROM so far but I'd like to give a shot to AOSP ROM.
Finally someone is here to give us AOSP..thanks @kin912
Please download link... Thanx for 4.4.4.
xnv said:
Is this ROM faster than Carbon ROM? Carbon is the best KK ROM so far but I'd like to give a shot to AOSP ROM.
Click to expand...
Click to collapse
I have ever used a KK rom for ION. So can you message me a carbon rom link ? We are here to waiting for AOSP rom.
Sorry if i ask for another rom in you topic kin912. Thank !!
Download link is mentioned in op
Please read properly.
http://pan.baidu.com/s/1jGiifaQ
dhruvmu said:
Download link is mentioned in op
Please read properly.
http://pan.baidu.com/s/1jGiifaQ
Click to expand...
Click to collapse
I thought it is 1st version and waiting for 2nd version 28/09 . So can you instruct to install ? Im newbie. Thank !
anhbinx said:
I thought it is 1st version and waiting for 2nd version 28/09 . So can you instruct to install ? Im newbie. Thank !
Click to expand...
Click to collapse
I think 2nd version is not yet uploaded. @kin912 will surely update the link when its done. Till then u can use version 1.
Flash this only if u have unlocked bootloader.
Reboot to recovery. Wipe data factory reset. Wipe cache and dalvik cache. Flash the ROM. Flash gapps and reboot.
dhruvmu said:
I think 2nd version is not yet uploaded. @kin912 will surely update the link when its done. Till then u can use version 1.
Flash this only if u have unlocked bootloader.
Reboot to recovery. Wipe data factory reset. Wipe cache and dalvik cache. Flash the ROM. Flash gapps and reboot.
Click to expand...
Click to collapse
Gapps 4.1.2 , is it right ? Do you install the rom ? Thanks.
anhbinx said:
Gapps 4.1.2 , is it right ? Do you install the rom ? Thanks.
Click to expand...
Click to collapse
No.
Use 4.4.4 gapps.
I have not installed the ROM yet but will try it out tonight.
I have flashed the rom. But i can not access Mobile Network, i set up manually but no working. Bluetooth as notice no working too for 1st version.
Can anyone help me on Mobile Network ?
anhbinx said:
I have flashed the rom. But i can not access Mobile Network, i set up manually but no working. Bluetooth as notice no working too for 1st version.
Can anyone help me on Mobile Network ?
Click to expand...
Click to collapse
@anhbinx can you mirror the file on mediafire?? I get corrupted file on every download..
Nobody gives any feedback?
kin912 said:
Nobody gives any feedback?
Click to expand...
Click to collapse
Can you provide the link for v2???
kin912 said:
Nobody gives any feedback?
Click to expand...
Click to collapse
I had installed the rom. Very smooth but mobile data can not connect... 3G is important to me so i have to switch the previous rom. . If you can fix the issue, i will appreciate that. Thanks
I just downloaded successfully but the speed was so horrible from opera browser..
 @kin912 thanks for your hard work and here are some comments on your aosp rom
1)The rom is smooth and no lag at all..
2)It is simple and the user interface is preety just like cm..
3)Bluetooth is not working at all..it doesnot want to get open..
4)And what I feel missing is cyanogenmod like theme engine..
Lastly @kin912 plz port cyanogenmod 4.4.4 milestone 10 and latest paranoid too ..coz you are only the one left with us who has ability to develop something new for ion..:good::good:
Chocklety Boyee said:
I just downloaded successfully but the speed was so horrible from opera browser..
@kin912 thanks for your hard work and here are some comments on your aosp rom
1)The rom is smooth and no lag at all..
2)It is simple and the user interface is preety just like cm..
3)Bluetooth is not working at all..it doesnot want to get open..
4)And what I feel missing is cyanogenmod like theme engine..
Lastly @kin912 plz port cyanogenmod 4.4.4 milestone 10 and latest paranoid too ..coz you are only the one left with us who has ability to develop something new for ion..:good::good:
Click to expand...
Click to collapse
Since you have downloaded can u mirror it. Even I am having a hard time downloading it. Got error in between after downloading for an hour.[emoji20] [emoji20] [emoji20]
anhbinx said:
I had installed the rom. Very smooth but mobile data can not connect... 3G is important to me so i have to switch the previous rom. . If you can fix the issue, i will appreciate that. Thanks
Click to expand...
Click to collapse
I have not 3G network simcard.Is 2G ok?

[ycjeson][MIUI 8] LeEco Cool1 (C106)

Hi guys,
First of all, this work is not mine, is from @ycjeson, I found it here: MIUI 8 For LeEco Cool1.
I decided to start this thread, because any information about LeEco Cool1 is difficult to find and in the most part it is in Russian or Chinese...
Get to work!
Do not forget to make a DUMP of your primary system partitions (like IMEI). Trust me, do it!!!
1) Tutorial here;
2) Needed tools here.
Install TWRP Recovery from BB72TT
Tutorial and download links here!
Install MIUI 8 and make root
1) I recomend a full wipe (cache, dalvik, data, system);
2) Put MIUI 8 and Magisk v10.2 into internal SD Card;
3) Move Magisk v10.2 zip to '/cache' partition using file manager of TWRP;
4) Install MIUI 8 via TWRP;
5) Reboot system without wipe anything (first boot will be long);
6) Reboot to TWRP;
7) Flash Magisk v10.2 zip from '/cache' partition;
8) Reboot system (may be fast);
9) Install phh's root manager apk and Latest Magisk Manager apk.
Optional to remove encryption from '/data' partiton:
10) Wipe data and cache;
11) Reboot system (boot will be very long, be patience);
12) Put Magisk v10.2 into internal memory;
13) Fash Magisk v10.2 zip again;
14) Reboot system (may be fast);
15) Install phh's root manager apk and Latest Magisk Manager apk.
DOWNLOAD ROM
Magisk downloads and more informations here!
Well guys, if possible, say thanks to people who contribute to improving the LeEco Cool1 community:
BB72TT from "leeco.re" forum, for your precious TWRP recovery
partyheadgmailcom from "leeco.re" forum, for tutorials (DUMP and How to install TWRP Recovery)
@ycjeson for your precious MIUI 8
@topjohnwu for Magisk
@phhusson for Superuser
Other people I forgot to mention!
I hope it's useful! :highfive:
A big thanks for your idea of introducing the ROM here.
I own this device, it has a lot of potential from software development angle but unfortunately the lack of popularity for this device is one the main reasons why devs are not interested in developing custom ROMs
Also this device runs LE ECO EUI hence I hope Le eco will come up with some awesome updates (if not then hope someone takes the initiative for some custom ROMs specially a lineage OS ROM would be perfect)
Screen shot and bug report?
download link
please provide download link:fingers-crossed::fingers-crossed::fingers-crossed:
not work
abhipundir said:
please provide download link:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Try this link: download
chidosu said:
not work
Click to expand...
Click to collapse
If you performed the procedure as described, this works, I even tested it!
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Kaushikrex007 said:
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Click to expand...
Click to collapse
So, you can't flash gapps in MiUi based ROMs, because gapps is just for AOSP ROMs. Search in Google about Google apps for MiUi.
What are the bug reports?
Please report the detailed bug report of the ROM.
Kaushikrex007 said:
I just installed it working perfectly but I didn't find G apps . can I flash arm 64 g apps package from the g apps open source website??
Click to expand...
Click to collapse
did you see any camera bug???????????????and what is the android version
Roms c106 compatible model c106-9?
Enviado desde mi Redmi Note 3 mediante Tapatalk
maligno1 said:
Roms c106 compatible model c106-9?
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
I think not.
Why am I losing signal at certain times? While phone calling it's shutting suddenly.
reddsmokee said:
Why am I losing signal at certain times? While phone calling it's shutting suddenly.
Click to expand...
Click to collapse
Had that issue too.. Roms bug
ceraklija said:
Had that issue too.. Roms bug
Click to expand...
Click to collapse
Thank you friend your reply. So is there any update without this issue?
reddsmokee said:
Thank you friend your reply. So is there any update without this issue?
Click to expand...
Click to collapse
I think no, the lastest version is the one from december.
Miui9 leeco cool1
http://bbs.7to.cn/thread-320449-1-1.html
sost_xda said:
Miui9 leeco cool1
http://bbs.7to.cn/thread-320449-1-1.html
Click to expand...
Click to collapse
Thank you for sharing. But a few question i have.
Does fingerprint unlock and 3g-4g internet work?
Because as i understand it, i'm confused.
Can I install it on my c103 device

[NEW ROM][U/B] Jaguar for Xperia Z3 DUAL

February 11: This is Jaguar rom for Xperia Z3 Dual. I am not going to describe the rom, as it is the same as the one for Z3. Look here for everything including description/instructions/credits etc...:https://forum.xda-developers.com/z3/orig-development/rom-jaguar-leo-lp-5-1-1-official-t3482840
DOWNLOAD ROM: https://forum.xda-developers.com/devdb/project/dl/?id=23106
DOWNLOAD KERNEL ADIUTOR/AFWALL: https://forum.xda-developers.com/devdb/project/dl/?id=20974
Unzip and install as normal apps on first boot. Without Afwall - no internet
KERNEL SOURCE (DON'T FLASH!): https://forum.xda-developers.com/devdb/project/dl/?id=23107
XDA:DevDB Information
[NEW ROM][U/B]JAGUAR ROM FOR XPERIA Z3 DUAL, ROM for the Sony Xperia Z3
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Stable
Stable Release Date: 2017-02-11
Created 2017-02-11
Last Updated 2017-02-11
Reserved
Mine
Mine
Reserved
Thanks for supporting Z3 Dual as well.
Will this ROM support VoLTE on Z3 Dual as well?
ajaychaudhary07 said:
Thanks for supporting Z3 Dual as well.
Will this ROM support VoLTE on Z3 Dual as well?
Click to expand...
Click to collapse
The features say so. Try and see for yourself!
Sent from my Xperia Z3 using Tapatalk
blackhawk_LA said:
The features say so. Try and see for yourself!
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
Hmm Okay I ll....
ilqar.ehlimanov said:
Thanks for supporting Z3 Dual as well.
help inistall problem:{
Click to expand...
Click to collapse
Which help? How are we supposed to help someone without knowing what problem is there?
Please realise that this is a DEVELOPMENT forum. And we as users can ask for help but after searching, reading and learning. I bet your problem has been already described and solved a few times.
The developers do more than enough making roms and sharing with us, so we should try to not annoy them with countless questions all the time.
PD: Sorry for the double post; I thought tapatalk would join them.
Sent from my Xperia Z3 using Tapatalk
please,help me.
Thank for answer!
I am download the rom but it doesn't opening.system is error.What can I do?
ilqar.ehlimanov said:
Thank for answer!
I am download the rom but it doesn't opening.system is error.What can I do?
Click to expand...
Click to collapse
Read Xperia Z3 thread. Everything there applies to Z3 dual. From your post it is not even clear what you did. Did you have an error on install in TWRP or on boot? If the rom installed fine, did your do fresh install, meaning you wiped system/data/cache/dalvik? Which TWRP did you use?
Again, read and follow instructions in Z3 thread...
twrp 3.0.2 wiped system/data/cache/dalvik I do its. Dowload but system is error.GOOGLE GAPPS is dowload but system UL is problems.
ilqar.ehlimanov said:
twrp 3.0.2 wiped system/data/cache/dalvik I do its. Dowload but system is error.GOOGLE GAPPS is dowload but system UL is problems.
Click to expand...
Click to collapse
You need to flash Gapps right after the rom and before booting, otherwise you will have errors...
I am dowload rom+open GAPS .it is opening but it is error system.
But z3LEO is dowload same is not problem.Simconnector can't comeing.
I think it's time for some better feedback, i installed the rom with no errors, booted nicely, but unfortunately the system ui keeps crashing.
I did a full wipe, system, data, dalvick, and cache, a clean install twice, got the system ui fc on both, no gapps installed, no extras installed.
Why is it crashing? I guess it's simply something about the build.prob file, anyway i can't tell because i couldn't get a logcat. I also tried it with airplane mode ON using power menu, rebooted and it didn't help.
https://drive.google.com/file/d/0B8E-wUe_vMJHalRpWmVJMlZCZXc/view?usp=drivesdk
Also, afterwards while restoring my backup, it showed me this:
https://drive.google.com/file/d/0B8E-wUe_vMJHMjNPNkJjV0RHbWM/view?usp=drivesdk
Maaaybe it's like a recovery error thing related to modems not being installed? Anyway i installed stock rom with my old twrp and restored my backup. Ready for testing when needed.
Hit thanks if that was helpful.
@veiron144lww if VoLTE option was available in network option?
veiron144lww said:
I think it's time for some better feedback, i installed the rom with no errors, booted nicely, but unfortunately the system ui keeps crashing.
I did a full wipe, system, data, dalvick, and cache, a clean install twice, got the system ui fc on both, no gapps installed, no extras installed.
Why is it crashing? I guess it's simply something about the build.prob file, anyway i can't tell because i couldn't get a logcat. I also tried it with airplane mode ON using power menu, rebooted and it didn't help.
https://drive.google.com/file/d/0B8E-wUe_vMJHalRpWmVJMlZCZXc/view?usp=drivesdk
Also, afterwards while restoring my backup, it showed me this:
https://drive.google.com/file/d/0B8E-wUe_vMJHMjNPNkJjV0RHbWM/view?usp=drivesdk
Maaaybe it's like a recovery error thing related to modems not being installed? Anyway i installed stock rom with my old twrp and restored my backup. Ready for testing when needed.
Hit thanks if that was helpful.
Click to expand...
Click to collapse
The errors while restoring happens to me usually, and they don't mean anything I think. Have you checked md5 of the rom? If so, there may be a problem with this build. I'm sure the Dev will check it out
Sent from my Xperia Z3 using Tapatalk
ajaychaudhary07 said:
@veiron144lww if VoLTE option was available in network option?
Click to expand...
Click to collapse
No way to know, nothing was reachable, not even the status bar, only the fc message and power menu.
Hit thanks if that helped.
veiron144lww said:
No way to know, nothing was reachable, not even the status bar, only the fc message and power menu.
Hit thanks if that helped.
Click to expand...
Click to collapse
Someone would have to run adb logcat by connecting to computer and running logcat during booting, as I don't have Z3 Dual...
ajaychaudhary07 said:
@veiron144lww if VoLTE option was available in network option?
Click to expand...
Click to collapse
Volte will not work on custom roms because Sony modem files for AOSP are published in a different format than on stock and there is no way to switch to volte modem like in stock.
@optimumpro Okay dear. Thanks
sorry,again worried you.if I KERNEL SOURCE is download this rom aosp 14.1 maybe is opening?and how can I dowload KERNEL SOURCE ?
ilqar.ehlimanov said:
sorry,again worried you.if I KERNEL SOURCE is download this rom aosp 14.1 maybe is opening?and how can I dowload KERNEL SOURCE ?
Click to expand...
Click to collapse
No, 14.1 kernel won't work with this rom. The only way to find out the problem is if someone runs adb logcat during boot. Kernel source is available in download section...

Face Lock from Secure lock for all Devices

Hi,so this is my very first thread here on XDA so and I'm so excited to present to you my work.
So I originally created this zip file for my device J5 2015(J500F) for when I realized that the Face Unlock feature you get after flashing normal Gapps on an AOSP Rom didn't simply do the trick on TouchWiz Nougat Roms ported for the J500F like the Updesh Rom or the Odessey Roms. Whenever I flashed the Gapps for nougat and then rebooted,the play store vanished off along with Play Services app and If i tried to install or flash a zip of the play store or play services,they just gave the traditional annoying error' Unfortunately --- has stopped working'.
As per my knowledge about these things go, I can say that TouchWiz has already a modded version of play store embedded in the rom unlike Aosp which kinda clashes with Gapps zip when Flashed in Twrp so I went ahead n after some research on how to make Flashable zips and how to modify gapps i finally was able to make a working Gapps zip file that only flashed the face Unlock app and the libs required
This is technically meant for any device running Android Nougat 7.1 and up and having an ARMv7 CPU architecture.
So this may be helpful for those who want only the face Unlock feature from the secure lock and this will even work on heavily modded Roms and is regardless of the device!:good::good::fingers-crossed:
So Version 2 is already up and its kinda big in size right now but expect it to shrink soon!
Cheers!
XDA:DevDB Information
[7.1][ARMv7]Face lock For all Aosp+Samsung Nougat Devices, Tool/Utility for the Samsung Galaxy J5
Contributors
Vmb265, Vmb265
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2018-02-11
Current Beta Version: 1
Beta Release Date: 2017-12-26
Created 2018-02-11
Last Updated 2018-02-11
Google Drive Link V2:
https://drive.google.com/file/d/1QgfhaCEzfWjNwbjsAMX2F3TBOsiFuVdp/view?usp=sharing
Video Tutorial:
https://youtu.be/MT_rM0EGnOA
Link?
Panesar.pb08 said:
Link?
Click to expand...
Click to collapse
Thread has been updated!
What's the difference between v1 and v2? Any changelog? Been using this for about a month now and its brilliant man good work thanks a lot
garylawwd said:
What's the difference between v1 and v2? Any changelog? Been using this for about a month now and its brilliant man good work thanks a lot
Click to expand...
Click to collapse
V1 was just like alpha test version so I never released it!V2 is all that works!
Bootloop for my
aristidew said:
Bootloop for my
Click to expand...
Click to collapse
A bit more info would be helpful. What device do you have? What android version do you have? Twrp version? Firmware?
I use a J500M with rom odyssei then Android 7.1.1,
TWRP PRO 3.1.1-1
Help me please !
aristidew said:
I use a J500M with rom odyssei then Android 7.1.1,
TWRP PRO 3.1.1-1
Help me please !
Click to expand...
Click to collapse
Try the smart lock zip. You will probably have to reflash your ROM now because of the bootloop but this zip definitely works on odyssey ROM its what I used
https://forum.xda-developers.com/galaxy-j5/themes/galaxy-j5-unlock-t3714602/post74739957
yes I just restored a backup. The flash went well but it did not change anything in <Security <Smart Lock.
Thanks anyway !
aristidew said:
yes I just restored a backup. The flash went well but it did not change anything in <Security <Smart Lock.
Thanks anyway !
Click to expand...
Click to collapse
That's weird because that's the zip I used when I had odyssey. Now I'm on the latest validus from last month and it also worked again. Sorry I couldn't help you any further but it should work for you. Try flashing again and wipe dalvik and cache after and see if that works.
garylawwd said:
That's weird because that's the zip I used when I had odyssey. Now I'm on the latest validus from last month and it also worked again. Sorry I couldn't help you any further but it should work for you. Try flashing again and wipe dalvik and cache after and see if that works.
Click to expand...
Click to collapse
yes I tried again 4 times, it did not work
aristidew said:
yes I tried again 4 times, it did not work
Click to expand...
Click to collapse
Hi, could you try and install the facelock apk from apkmirror with root permissions in the system/app.
Just download the correct version for your android version and CPU architecture from ApkMirror and then place it in /system/app with a root file explorer like mi explorer or es file manager!
Yeaaah, it works, Thanks bro !!!

Categories

Resources