Huawei P10 stereo speaker mod oreo [Magisk Module] - Huawei P10 Themes, Apps, and Mods

This mod enables the earspeaker to act as the second speaker in combination with the main bottom firing speaker.
This mod is tested on the B379 firmware on the VTR-L09. The difference is not night and day in my opinion but try it yourself.
It's not completely tweaked yet but it works.
Module is made for magisk 17 and higher.
Download is in the attachment.
*Disclaimer
Flash and use at your own risk! If you blame me for ruining your phone, you should fish slap yourself

It's not worth it...it is to low on volume.
But still, thanks
---------- Post added at 12:31 PM ---------- Previous post was at 11:48 AM ----------
Can you give a mod to make it back?

Just disable the module. I will tweak it later more.

I disable it but the mod is still activated
---------- Post added at 12:02 PM ---------- Previous post was at 11:56 AM ----------
And now I dont have any sound...can you give me the stock mixer?

Mrawy said:
I disable it but the mod is still activated
---------- Post added at 12:02 PM ---------- Previous post was at 11:56 AM ----------
And now I dont have any sound...can you give me the stock mixer?
Click to expand...
Click to collapse
Did you reboot? If it's still active I'll upload the original file from b379
Sent from my VTR-L09 using Tapatalk

wulsic said:
Did you reboot? If it's still active I'll upload the original file from b379
Click to expand...
Click to collapse
Yeah I reboot it...and now I dont have any sound.
I tried to install it back.and still no sound

Mrawy said:
Yeah I reboot it...and now I dont have any sound.
I tried to install it back.and still no sound
Click to expand...
Click to collapse
That's weird, I don't face those issues. Try to check its permissions if it's rw r r(644) in /odm/etc/audio/hi6403/mixer_volumes_VICTORIA_ce.xml
You can use the terminal to chmod 644 /odm/etc/audio/hi6403/mixer_volumes_VICTORIA_ce.xml
Or use root browser. If those things don't work try to replace the file with a copy of /odm/etc/audio/hi6403/mixer_volumes_VICTORIA_normal.xml. Can't make a flashable zip right now, still odd behavior.
Sent from my VTR-L09 using Tapatalk

Where is download link ?

Related

Need JB boot animation

Can somebody please me where I can get the JB boot animation which will work on PA2.99. I like it very much, after searching I found one in myONE RC8 section but not sure whether it would work or not in PA. I just downloaded the update zip from there and found framework-res.apk instead of boot animation.zip, and so bit scared to try. Can anybody please confirm me this or help e to find the Jb boot animation for PA.
Sent from my One V
U need to download full rom and extract it from there.... update.zip has nothing to do with bootanimation i suppose.... and it will work on PA.... jst rename it to bootanimation.zip and set permissions...!!!!
Even I was expecting something like bootanimation.zip but instead found the framework-res.apk
Not sure if android 4+ version integrated the boot animation with framework-res.apk file
Can anybody please post the working Jb boot animation on PA please.
Sent from my One V
No no.... framework has nothing to do with bootanimation....
---------- Post added at 11:49 PM ---------- Previous post was at 11:46 PM ----------
Amm... are asking 4 dat glowing 'X' one....??? just wanna be sure....
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
If yes.... den extract from here.... btw, u can flash it.... except camera.... everything works...!!! Jst change the gallary app after flash...
---------- Post added at 11:56 PM ---------- Previous post was at 11:54 PM ----------
http://forum.xda-developers.com/showthread.php?t=2002212
No no just Google it download the zip
Don't flash
Open it there will be a notepad thing
Open it
Put our screen resolution and if u want modify the frame rate and voila u van have any phones boot animation at ur step
Sent from my One V using xda premium

need help

when i flash a file with the apk like ogyoutube it crashes on start up and even when i try to open it up
and when i install it like a normal apk it works fine
can someone please help i want to put the apk file in the rom so it is flashed into the system and dont want it to crash
Put it to /data/app folder
Sent from my GT-I9100 using Tapatalk
---------- Post added at 12:39 PM ---------- Previous post was at 12:35 PM ----------
Or try titanium back up and use convert to system app
Sent from my GT-I9100 using Tapatalk

[Q] disabling stock Sprint lg g3 boot and shutdown animations

I was hoping someone can help me figure out how to disable these or disable and install the ones I downloaded that are the android l boot animations?
Mime is an Australian version and the boot and shutdown animations are located in /data/.op/opt_au/
Sent from my LG-D855 using Tapatalk
I was hoping this was in the q&a section
randyrampage609 said:
I was hoping someone can help me figure out how to disable these or disable and install the ones I downloaded that are the android l boot animations?
Click to expand...
Click to collapse
the files are under system/media. you can download and put new files there, as long as they are names the same then new animations will work fine
stas333 said:
the files are under system/media. you can download and put new files there, as long as they are names the same then new animations will work fine
Click to expand...
Click to collapse
I tried putting them in the locations you suggested before I posted this but when I went to rename the Sprint animations and then copy the new files to suggested folder the Sprint ones came up on boot and shutdown still be in mind I was doing this on my phone would it be easier to use my laptop instead?
randyrampage609 said:
I tried putting them in the locations you suggested before I posted this but when I went to rename the Sprint animations and then copy the new files to suggested folder the Sprint ones came up on boot and shutdown still be in mind I was doing this on my phone would it be easier to use my laptop instead?
Click to expand...
Click to collapse
rename the sprint animations with ending ".bak". Also, make sure the permissions is right
stas333 said:
rename the sprint animations with ending ".bak". Also, make sure the permissions is right
Click to expand...
Click to collapse
I'm using supersu and xposed installer how would i go about making sure the permissions are right and i think i have the Sprint files labeled as .bak
randyrampage609 said:
I'm using supersu and xposed installer how would i go about making sure the permissions are right and i think i have the Sprint files labeled as .bak
Click to expand...
Click to collapse
file editor.
stas333 said:
file editor.
Click to expand...
Click to collapse
Can you elaborate on file editor please? Thanks
The Sprint Boot Animations are in carrier/cust/poweroff and /poweron. If you messed with /system/media you deleted stock LG animations not Sprint.
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:11 AM ---------- Previous post was at 04:10 AM ----------
This is covered in the Sprint Themes section
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:13 AM ---------- Previous post was at 04:11 AM ----------
And you need to use Root Explorer or some kind of good root file browser with r/w capabilities
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:19 AM ---------- Previous post was at 04:13 AM ----------
To get rid of the Sprint animations delete them from /poweron and /poweroff. Dont overwrite them with something else, just delete them and use /system/media for any custom or stock LG animations. Hope this helped.
Sent from my LGLS990 using Tapatalk
sinisin said:
The Sprint Boot Animations are in carrier/cust/poweroff and /poweron. If you messed with /system/media you deleted stock LG animations not Sprint.
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:11 AM ---------- Previous post was at 04:10 AM ----------
This is covered in the Sprint Themes section
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:13 AM ---------- Previous post was at 04:11 AM ----------
And you need to use Root Explorer or some kind of good root file browser with r/w capabilities
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:19 AM ---------- Previous post was at 04:13 AM ----------
To get rid of the Sprint animations delete them from /poweron and /poweroff. Dont overwrite them with something else, just delete them and use /system/media for any custom or stock LG animations. Hope this helped.
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
Thanks I'll try what you suggested when I get home
And if you could be so kind to explain how the permissions are set for the new animations and to delete the Sprint ones that would be helpful I usually know this stuff but I tried out iPhone for a year so I need to get back into android customization before the iPhone I had HTC one x on cyanogen thanks for all the help
sinisin said:
The Sprint Boot Animations are in carrier/cust/poweroff and /poweron. If you messed with /system/media you deleted stock LG animations not Sprint.
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:11 AM ---------- Previous post was at 04:10 AM ----------
This is covered in the Sprint Themes section
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:13 AM ---------- Previous post was at 04:11 AM ----------
And you need to use Root Explorer or some kind of good root file browser with r/w capabilities
Sent from my LGLS990 using Tapatalk
---------- Post added at 04:19 AM ---------- Previous post was at 04:13 AM ----------
To get rid of the Sprint animations delete them from /poweron and /poweroff. Dont overwrite them with something else, just delete them and use /system/media for any custom or stock LG animations. Hope this helped.
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
yes you helped greatly just disabled the stock sprint animations now when i shutdown it doesnt do the lg animation which is fine because i want to get rid of them as well but the start up lg plays anyway to disable that one
rwrr are the permissions and any animations that are still playing are in system/media unless you're talking about the splash screen(the lg screen before the boot animation) in which case thats part of the kernel and not able to change.
Sent from my LGLS990 using Tapatalk

[All-Around-Post]Edge+ files[Root/Twrp/Kernels/Mods/Recoverys/Firmware/filesonly]3/26

Here's a start:
Click Here
Above is a link to how to use someone these files. I had to hunt most of these down and get someone them off my old pc. I hope this fixes the issues with most of Gameronone files that are missing. If you have any missing files please post them and ill post them in the OP.
All files here: Click here
Marshmallow root:
check OEM
Unzip Download
Flash tar in odin
Reboot.
Will Boot loop a couple times then will boot up with boot animation.​
Roms:
Marshmallow-
-----------------------
Lollipop-
Defender 1.3: Download Here
TW Slim 1.3: Download Here
Sprint Note 5 Stock OK3 Port: Download Here
-------------------------------
Kernels:
Marshmallow-
Stock kernel:
Download Here
-----------------------
Lollipop-
Root Kernel(zip): Download Here
Root Kernel(tar): Download Here
----------------------
Mods:
Marshmallow-
Note 5 patch MM: Do Not FLASH NOTE 5 ROMS! It brick your device and the stock MM tar will not fix this!
-----------------------
Lollipop-
Note 5 Patch: Download Here
True Edge: Download Here
Sound Boost xml: Download Here
420 dpi mod: Download Here
---------------------
Recoverys:
Marshmallow ONLY:
TWRP 3.0.0.1 (thanks to Beandip-Javier): Download Here
Lollipop Only!:
TWRP 2.8: Download Here
TWRP 3.0: Download Here
----------------------
Odin:
3.10.0: Download Here
3.10.5: Download Here
3.10.6: Download Here
3.10.7: Download Here
----------------------
Unbricking Tar with pit:
Marshmallow:
BPC3 full wipe system restore: Download here
Lollipop-
Pit: Download here
Unbrick tar: Download Here
---------------------
Firmware:
MM:
BPD2: Download here
BPD1: Download Here
BPC3 : Download here
Lollipop-
OK3: Download Here
OJ6: Not Found
OI6: Download Here
OG6: Download Here
---------------------
Xposed:
APK: Download Here
MM:
Latest stable xposed MM: Download Here
Lp:
Zip: Download Here
--------------
TW Launcher:
Tw lollipop: Download Here
Tw Marshmallow: Download Here
Dude thank you
Sent from my SM-G928P using Tapatalk
Thank You
Just when hope was turning dark, you added light. Thank you. I've been looking for some of these. Me and my s6+ give big thanks.
Anyone have the TW Launcher?
Beandip-Javier said:
Anyone have the TW Launcher?
Click to expand...
Click to collapse
Updated in OP
MonkeyAround said:
Updated in OP
Click to expand...
Click to collapse
You the man, thank you.
Any of these links work for me, just pop up a lot of junk advertising.. Please help
borgx76 said:
Any of these links work for me, just pop up a lot of junk advertising.. Please help
Click to expand...
Click to collapse
If your using your phone to download from chrome you have to close the new window out that opens the advertisment and go back to the old window with the download link. I had to do it a few times but it worked
nvm
Sent from my SM-G928P using XDA Premium HD app
Both note 5 patch and true edge zips are malware
Sent from my P01M using XDA Premium HD app
thatruth132 said:
Both note 5 patch and true edge zips are malware
Sent from my P01M using XDA Premium HD app
Click to expand...
Click to collapse
Shouldn't be, the note 5 patch let's you run Note 5 roms on the sprint edge plus.
thatruth132 said:
Both note 5 patch and true edge zips are malware
Sent from my P01M using XDA Premium HD app
Click to expand...
Click to collapse
I have used both of those and they were not malware for me?
After download was asked to exract and intsall deleted aafter oc said malware ...
---------- Post added at 07:42 PM ---------- Previous post was at 07:41 PM ----------
But i did install the MOAR ROM from the note 5 thread and just flashed the boot img drom the defender rom and now i have MOAR just no full edge settings
---------- Post added at 07:51 PM ---------- Previous post was at 07:42 PM ----------
Can someone post a less confusing link
---------- Post added at 11:44 AM ---------- Previous post was at 10:51 AM ----------
Ok so after flashing the Note 5 MOAR
then the fix
Then tranfered over the edge files from Defender 0K3
I have it all working
In love
Sent from my SM-N928P using XDA Premium HD app
Beandip-Javier said:
Shouldn't be, the note 5 patch let's you run Note 5 roms on the sprint edge plus.
Click to expand...
Click to collapse
joedaddyoo said:
I have used both of those and they were not malware for me?
Click to expand...
Click to collapse
thatruth132 said:
After download was asked to exract and intsall deleted aafter oc said malware ...
---------- Post added at 07:42 PM ---------- Previous post was at 07:41 PM ----------
But i did install the MOAR ROM from the note 5 thread and just flashed the boot img drom the defender rom and now i have MOAR just no full edge settings
---------- Post added at 07:51 PM ---------- Previous post was at 07:42 PM ----------
Can someone post a less confusing link
---------- Post added at 11:44 AM ---------- Previous post was at 10:51 AM ----------
Ok so after flashing the Note 5 MOAR
then the fix
Then tranfered over the edge files from Defender 0K3
I have it all working
In love
Sent from my SM-N928P using XDA Premium HD app
Click to expand...
Click to collapse
Get a ad blocker
When you click the big blue download button it promotes a ad just click back and click it again. No need to extract anything just flash in recovery. There is no malware if that's what you're phone or pc tells you it's an ad download (fake file) which the Internet is full of now. Like saying you have a virus you need to scan your device Blah blah blah. If you can't figure out how to navigate threw ads you probably shouldn't be flashing file, since most likely you keep download malware ad files.
The only reason I used devhost is because I don't really know any hosting sites and gameronone used it, it's free (ad based), and it allows up to 2gbs of upload per-file.
So again
Click blue download only
Click back once to navigate out of the ad
Click blue download again
Recommend CM browser
It's really not hard.
So back to the post .... has anyone else tried flashing the moar rom
thatruth132 said:
So back to the post .... has anyone else tried flashing the moar rom
Click to expand...
Click to collapse
Yeah I flashed last month and it been working great for me.
edge files
Can you tell the files that you transfer over? Soo i can be in love to lol
Tried the MM Odin file it failed
​
thatruth132 said:
Tried the MM Odin file it failed
Click to expand...
Click to collapse
What MM file? The one that said test only? I didn't post it cause I was toying around with it and it could brick the device.
Would any one have stock kernel zip? Computer down not able to pull from rom.

3d touch and camera mod

Hey ,hope u doing well
Here's an awesome mod for all miui 9 users
https://drive.google.com/file/d/0BzECsSl_g89LMEZFMHgwMFF6Zm8/view?usp=drivesdk
By installing it u will get stock like 3d pressure sensed
Shortcuts over apps
Installation:
If u are rooted then
Unroot Ur device with magisk uninstaller
Flash the attached zip
Root back Ur device
Magisk /supersu
Walla!!!
You are done enjoy
How i can uninstall this mode without full flash ?
Is this working for u
Is it stable??
Why it needs to unroot first? Can you post a video using it?
i have non rooted device and TWRP installed with stable rom can i use this mod, and if any thing wrong happens is there any way to uninstall this mode? waiting for your positive reply dear Mohammad Jameel.
It doesn't work and It breaks the camera..
---------- Post added at 06:04 PM ---------- Previous post was at 06:04 PM ----------
It doesn't work and it breaks the camera

Categories

Resources