Related
I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.
I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out
mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?
hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.
okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.
I'd like to keep bluetooth on in my car for taking calls, but the phone seems to automatically output audio through that as well, even if a 3.5mm cable is connected. I searched through the settings to no avail. Is it possible to use BT strictly for calls while still outputting music through aux? I mostly listen through Pandora, and I'm on CM7.
I forgot about this post, but it looks like it didn't get any replies. Bump!
Bump
Solution
Yes, it is possible, while connected to your car,
go to settings, Wireless & networks, Bluetooth settings,
search for your car's Bluetooth name and long press it, this should show you a "pop up" window,
click on "Options...", there you have something called Profiles which allow you to control the behavior of that particular Bluetooth device,
You should have 2 boxes ticked, Phone and Media,
tick media off and your device will only work for calls!
Hope it helps!
Best Regards,
P.S: If your phone connects via Bluetooth to your car and streams music, than I must assume your car supports A2DP, in which case, you will gain nothing of audio quality for using the aux input... just saying.
TheSeeK said:
Yes, it is possible, while connected to your car,
go to settings, Wireless & networks, Bluetooth settings,
search for your car's Bluetooth name and long press it, this should show you a "pop up" window,
click on "Options...", there you have something called Profiles which allow you to control the behavior of that particular Bluetooth device,
You should have 2 boxes ticked, Phone and Media,
tick media off and your device will only work for calls!
Hope it helps!
Best Regards,
P.S: If your phone connects via Bluetooth to your car and streams music, than I must assume your car supports A2DP, in which case, you will gain nothing of audio quality for using the aux input... just saying.
Click to expand...
Click to collapse
Oh man, thanks so much. I can't believe it took this long to get this straightforward of an answer. I'll have to try it out today.
As far as the audio quality goes, I feel like there's a subjective difference; some sort of flakiness or bits of static when going through BT. But maybe it's just a placebo effect; I'll do some more trials.
EfemaN said:
Oh man, thanks so much. I can't believe it took this long to get this straightforward of an answer. I'll have to try it out today.
Click to expand...
Click to collapse
You are most welcome!
Come give feedback later so that other can benefit from your doubt!
EfemaN said:
As far as the audio quality goes, I feel like there's a subjective difference; some sort of flakiness or bits of static when going through BT. But maybe it's just a placebo effect; I'll do some more trials.
Click to expand...
Click to collapse
Well, it's not impossible.. You could have a low quality Bluetooth receiver but since it is built in with your car it seems unlikely.. either way, what matters is you get your solution and your peace of mind! (I know how I get when something like this happens and I can't figure out a solution! xD)
Don't forget to post back.
Best Regards,
Yep, works flawlessly. I haven't done enough testing to see whether my car sees audio differences between aux and BT, but I'm at least able to use aux separately if I find a difference.
Connects to car automatically only with PHONE mode and have to connect MEDIA manually through settings every single time
kolyan said:
Connects to car automatically only with PHONE mode and have to connect MEDIA manually through settings every single time
Click to expand...
Click to collapse
I have to unpair and repair my Bluetooth headset every single time I use it. (phone audio only). Looks like Samsung really borked up BT.
Thinking about upgrading to MDL this weekend to see if that fixes it.
i dont know about bluetooth with car, but i listen to my bluetooth headphones every day at work for hours and i have had no probs whatsoever with my bluetooth. it paired really easy like too easy and that was it.
I guess thanks for the fact that at least it works manually so in my case its a 100% software issue.
I'm having no issues with phone or media when hooked up to my car.
Sent from my SGH-M919 using Tapatalk 2
RGD622 said:
I'm having no issues with phone or media when hooked up to my car.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Which car or which radio?
kolyan said:
Which car or which radio?
Click to expand...
Click to collapse
I have the same problem with my Denon aftermarket head unit.
My Motorola BT headset pairs ok, but the quality of the audio is so bad to my callers I can't use it. On my S3 it sounded fine. I had to switch to a different headset that's giant and stupid.
kolyan said:
Which car or which radio?
Click to expand...
Click to collapse
2011 Hyundai Sonata
have a jabra headset and its paired excellently 100% of the time
Had minor issues (device based) when it was "paired" to 2 devices.
Use Bluetooth Auto Connect from play store. I was having the same problem except mine connected on to media instead of phone. That app fixed it right up.
Mine will drop connection intermittently to my VW RNS-315 head unit and also drop connection to my Jawbone Icon HD. When it drops the Jawbone I often see a message on the screen that says Bluetooth Sharing has crashed. Not sure if this is as a result of the rooting process or if it's a glitch in the latest firmware. Hoping Samsung will fix and T-Mo will release patch soon.
Have yet to have an issue here with my S4 and my JVC Arsenel (Dont remember which model #, was one of the higher single DIN units a year ago though), use it daily and it connects on its own without issue / hassel both phone and media
I experience the same phone only problem with my Ford Sync system, I have to manually check Media audio, but it pairs both the first tube after unpairing. I'll try the Play Store app and report back today. I will say is nice to see voice control over bluetooth has been fixed in Jelly Bean.
UPDATE: Bluetooth Auto Connect (The first one listed in a Play Store search by Jakub Klos) works flawlessly to connect Phone and Media audio. Thanks @Sym_Link!
No problems with bluetooth here, my Pioneer radio in my Grand Marquis, both audio and phone sync flawlessly. However, my Sony unit in the Saturn, will sync the phone no problem, but I still have to manually check the box to sync with audio.
My experience w/ BT audio has been variable. I have an aftermarket head unit installed on a '05 Acura RSX (JVC-NSX1 - http://www.crutchfield.com/ISEO-rgbtcspd/p_105NSX1/JVC-KW-NSX1.html).
Note: my headunit also utilizes MirrorLink...which is just flippin' awesome.
BT Media audio seems to be very app dependent. I use Grooveshark and Play Music for my day to day listening, and I find that my Grooveshark will auto-play when BT Connects but if I'm going from a fresh power cycle of my automobile to Google Play I have to start the app on my phone prior to accessing the in-dash controls on my head unit.
Other times I can just select in dash controls and it will play Play Music.
Ironically, since the iOS 6.0 update plugging in the GF's iPhone no longer plays audio (freaking Apple). So if she wants to stream media it's only available over BT. Ah, progress!
I'm listening to the internet radio on my Note 3. Used it with the mini 3.5 mm cable first, then found the menu in my car media center to hook it up via BT. Got everything connected seems to work fine the sound quality via BT is much better that via the cable.
HOWEVER BT connection between the phone and radio randomly disconnects for no particular reason (I have it set to connect automatically as soon as the ignition is turned on) and every time it connects it starts playing the Samsung tune or whatever music theme even on the top of the radio music.
What could be causing that?
My touchscreen clarion does it to as far as the disconnects go, and music playing through the default Google player vs my player pro.. As for disconnecting, mine just have a issue connecting off hand but best way is make sure the player in the car is turned on with bt enabled and then turn on the phones bt and press play after the connection is made, shouldn't have any disconnects
As for the playing, if it's the same as what mine used to do, I'd free one of the players and keep the main one you use that way nothing plays but what you want.
Hope that helped any..
Sent from my SM-N900T using XDA Premium 4 mobile app
ezsoulja said:
My touchscreen clarion does it to as far as the disconnects go, and music playing through the default Google player vs my player pro.. As for disconnecting, mine just have a issue connecting off hand but best way is make sure the player in the car is turned on with bt enabled and then turn on the phones bt and press play after the connection is made, shouldn't have any disconnects
As for the playing, if it's the same as what mine used to do, I'd free one of the players and keep the main one you use that way nothing plays but what you want.
Hope that helped any..
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes this is what I do. As soon as as ignition is on BT connects, and the stupid Samsung tune ("over the horizon" according to my car audio system) starts playing in the car by default. I have to go into phone menu and pause that and then start the radio. And then it starts disconnecting the BT so I have to do all those things again (this time while driving)...
toshik1 said:
Yes this is what I do. As soon as as ignition is on BT connects, and the stupid Samsung tune ("over the horizon" according to my car audio system) starts playing in the car by default. I have to go into phone menu and pause that and then start the radio. And then it starts disconnecting the BT so I have to do all those things again (this time while driving)...
Click to expand...
Click to collapse
Sounds like something with your cars receiver doing like a auto play type deal once connected. The phone wouldnt have a way of playing automatically without being told to.. id check the receiver and see if it has something about auto and changing it to manual, the only thing that should be auto is the pair
I connect my Note 3 to my Kenwood deck daily. Its a bit different scenario but I have no issues with BT streaming at all. It connects automatically and waits for me to switch to Pandora or BT streaming. When connected it stays connected and doesn't skip. I think the phone can be solid with the right receiving device.
The only issue I do have is that the microphone doesn't work when people call me. Works fine if I call them.
I have had zero issues on 2 different Toyota vehicles using the factory audio system with Bluetooth. Phone and media (music) connects. Music only starts playing when I select BT on my stereo. No issues. Probably something with how your car's system is setup.
DECIM8 said:
I connect my Note 3 to my Kenwood deck daily. Its a bit different scenario but I have no issues with BT streaming at all. It connects automatically and waits for me to switch to Pandora or BT streaming. When connected it stays connected and doesn't skip. I think the phone can be solid with the right receiving device.
The only issue I do have is that the microphone doesn't work when people call me. Works fine if I call them.
Click to expand...
Click to collapse
I doubt that recent LS460 premium audio would be at blame.
BT connection issue
I have a question for you guys, up until recently last week I had been using my stock note 3 with my 2013 kia optima bluetooth radio but last week it started only connecting to the phone audio ive tried pairing and repairing but only the phone audio connects no media audio, ive tried going into the settings and checking the media audio box but it will only flash for a little and not connect any idea on what it may be or how I can fix it? Thanks
rogelior said:
I have a question for you guys, up until recently last week I had been using my stock note 3 with my 2013 kia optima bluetooth radio but last week it started only connecting to the phone audio ive tried pairing and repairing but only the phone audio connects no media audio, ive tried going into the settings and checking the media audio box but it will only flash for a little and not connect any idea on what it may be or how I can fix it? Thanks
Click to expand...
Click to collapse
Is there a menu in your car for audio/media/Bluetooth settings? On Toyota, they have a menu for BT Audio devices where you can connect.
Sent from my SM-N900T using XDA Premium 4 mobile app
BT connection issue
shorty87 said:
Is there a menu in your car for audio/media/Bluetooth settings? On Toyota, they have a menu for BT Audio devices where you can connect.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yea but it shows both phone and media next to my phone yet it won't play the media audio only the phone
For reason Bluetooth audio doesn't work properly when I'm connecting it to car Bluetooth. However it works fine with headsets. I tried different cars by different brands and the issue stays. Please help.
No issue here. What is the issue ? Calls or music?
artoax said:
No issue here. What is the issue ? Calls or music?
Click to expand...
Click to collapse
Music. The audio sounds muffled. Was using OP6T before and it works perfectly. Issue happens only in iqoo9Pro
sounds like an issue with the BT codecs. Jump into Developer mode and play with the BT settings.
See screenshot attached.
artoax said:
sounds like an issue with the BT codecs. Jump into Developer mode and play with the BT settings.
See screenshot attached.
Click to expand...
Click to collapse
These are the options when connected to my car. All other options are greyed out. So no luck yet
M95ahd said:
For reason Bluetooth audio doesn't work properly when I'm connecting it to car Bluetooth. However it works fine with headsets. I tried different cars by different brands and the issue stays. Please help.
Click to expand...
Click to collapse
I have the same issue but a i think it's all Bluetooth conecction it sounds so low
I don't know what to do
Does cheking the disable bluetooth a2dp hardware offload fixes it? if not return that setting to the default if you want.