Develop Bugs

[ROM UPDATED NOV 11 [UB] DirtyUnicorns Lollipop 5.1.1 r29 Unofficial

If anyone has a problem with Dialer crashing, flash this and reboot: http://forum.xda-developers.com/attachment.php?attachmentid=3542888&d=1447583272
November 11: Rom updated. This is the same release 29 with the following changes:
1. Fixed notifications: now you have the correct icons in status bar
2. Network switches in Settings: mobile, wifi and bluetooth
3. Changes in WP8_supplicant: better wifi
You can flash dirty if you are on the previous release.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15160
--------------------------------------------------------------------------------------------------------
November 9: Rom updated to release 29
1. Latest Google sources including stagefright and audioflinger patches
2. Updated M5 kernel compiled with GCC 5.2.1 Ubertc - some say no one has done it before
3. Du has abandoned Lollipop (too bad for them), so, this is final unless there are further releases by Google
Kernel does NOT have recovery builtin. So, have TWRP in Fota/Recovery partition
Download: See download link for November 11 above
You may try to do dirty flashing if you were on a previous release, but full wipe is preferable
Oh, I want to give credit (the second time in this thread) for initial kernel sources to @Myself5
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
October 14. New update to LP 5.1.1 r24. This release includes:
1. Blacklist (call blocking). If you go to Security, you will see Blacklist heading where you can add numbers to block
2. Google October Security Patches.
3. Latest Sources (r.24)
This is probably the final Lollipop release, unless Google does r.25 et al. Virtually no one is doing anything with Lollipop: everyone is on Marshmallow... So, enjoy it while it lasts, as we are looking at the next summer the earliest when Marshmallow could become stable...
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14752
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
September 23. Rom updated to LP 5.1.1 r18, DU release 9.7. Latest sources.
Kernel includes the implementation of the latest Linux commit where persistent ram is replaced with Pstore. Also, the latest Sony 14.6 release with a revamped wifi module. The result: more ram available, better wifi and general stability... This kernel is only available on my Jaguar rom (originally) and this version of DU.
Do a fresh install and then you can restore your data (if you were on my prior release), otherwise, fresh install.
Remember, due to DU implementation of Selinux switch (which in my release is redundant (as Selinux is disabled in kernel), the system will take an extra minute (on first boot only) to have access to Settings. Android may complain that Settings app is not responding, choose wait and then allow root access to Settings, so that it could do its thing with Selinux switch. You only have to do it once...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=14515
____________________________________________________________________________________________________
August 22: Rom updated to LP 5.1.1 r13. Latest sources.
The main change: I have fixed brightness in TWRP 2.8.7. Due to horrendously wrong values, brightness could not be manually adjusted and also exceeded Sony's maximum settings over 18 times, which resulted in temperature rising to over 65 degrees during flashing. So, now the brightness lever works and you have about 52 degrees during backup/restore. I will be pushing commits upstream soon..
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=14132 Download link fixed. There were 4 downloads, please re-download and re- flash.....
You can flash dirty if you are on my previous release.
____________________________________________________________________________________________
August 14: Rom updated to LP 5.1.1 r10 and DU 9.6. Original DU is still release 9, but I used Google's r10 sources.
Latest AOSP/CM/DU sources. Latest M5 kernel with cpu/gpu overclock. TWRP 2.8.7 is in boot image.
You may flash dirty if you were on my previous release. If you use Xposed modules, you must flash Xposed for LP5.1.1 before rebooting.
Otherwise, clean flash. Keep in mind that due to DU changes LockClock app is part of DU Tweaks and if you remove it, you won't have access to Tweaks anymore. The good news is that DU's Lockclock does not have googleplay binaries...
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14022
__________________________________________________________________________________________
August 11: Kernel updated to include the latest CM and M5 commits. Kernel now is 2 mb lighter. Also, the fixed TWRP 2.8.7 is included in boot.img.
Download: http://forum.xda-developers.com/showpost.php?p=62282724&postcount=198
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
August 3: New build. Latest changes. On my end latest M5 kernel with the following additions:
1. CPU frequencies and voltage: 268/300/422/652/729/883/960/1036/1190/1267/1497/1574/1728/1958/2150/2265/2419/2457 and they all show up in voltage
2. GPU two new frequencies: 533/600
I flashed dirty, wiped cache/dalvik and had no problems, but clean flash with the subsequent data restore in TWRP is still preferable.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=13841
P.S. TWRP is in boot, so, get rid of your fota recovery first...
___________________________________________________________________________________________________
July 31: Kernel updated to reflect recent M5 changes. Also, GPU overclock to 600 is added thanks to Androguide.
Download: http://forum.xda-developers.com/showpost.php?p=62126634&postcount=145
____________________________________________________________________________________________________
July 30: New build. This is DU's release 9.5. Latest sources. See changelog in rom.
On my side: Wifi disconnection after 15 min of sleep and excessive draining are fixed. Now, the battery draining is very close to Kitkat
And generally wifi has more power now, as I have increased power cap to 80. All features listed below are also included
On first boot, Settings app is going to hang for about 1 minute due to the fact that SElinux switch is looking for Selinux which is expelled from the rom (as you know), so, just wait for Settings ask for root permission and grant it. If the system says app is not responding, choose wait, because you really want to give Settings that root permission, so that it wouldn't bother you anymore
If you are on a previous DU build, you may flash dirty, but fresh install (and then data restore in TWRP) is preferred.
TWRP is back in boot.img, so, if you have fota recovery, get rid of it in bootloader: fastboot erase recovery
Enjoy
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13759
_______________________________________________________________________________________
July 19: rom updated. This is 5.1.1 release 8. Latest changes
All hardened features
FM radio included
New M5 kernel with TWRP
Slim Launcher
Here is how to update without losing your data, provided you are upgrading from an earlier DU version:
1. Back up your current DU version
2. Factory Reset
3. Wipe System/Data/Cache
4. Flash the rom
5. Do Xposed Framework if you use it
6. Restore Data partition from your previous DU version
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13601
_____________________________________________________________________________________________________
July 14. This is an update in SystemUI.apk and Settings.apk. The first one may (or may not) fix the infamous screen freezing issue and incorporates this AOSPA commit: https://github.com/AOSPA-L/android_frameworks_base/commit/0542d859b7678b40c1e39f46a75cd9eb4af68103.
The second in Settings brings Hotspot idle support based on this: https://github.com/DirtyUnicorns/android_packages_apps_Settings/commit/ccabd57818de51196e7cb82eeae266e90029bb08
Just flash the attached dirty and reboot.
Download Link: forum.xda-developers.com/attachment.php?attachmentid=3404076&d=1436880734
________________________________________________________________________________________
New build is available. Latest changes including Selinux switch, Quick settings access to the respective setting.
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13497
_______________________________________________________________________________________
July 8, new kernel added
Download Link: http://forum.xda-developers.com/showpost.php?p=61766574&postcount=92
________________________________________________________________________________________
July 4, FM Radio added
Download: http://forum.xda-developers.com/showpost.php?p=61699414&postcount=88
Rom updated on June 27. This is LP 5.1.1 release 5. Latest DU and Google sources. All my hardened features included.
Additional changes (by me):
1. Network selection includes all options seen in phone test menu. Now, you can select many combinations of networks in Settings/More/Cellular Networks, as opposed to just 3g/2g/Lte, which means that your selection will stick, unlike when you make changes in test phone menu
2. SlimLauncher instead of Launcher3
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13325
______________________________________________________________________________________________________
New build is up. I think I was able to address most heat issues. There are also a few changes in DU sources in framework, telephony, vendor and DU tweaks. CPUs are running at about 32 degrees idle and about 42-47 under load. You should also see battery life improvement. There is absolutely no screen flickering (because of no overheating). This is experimental, as I have addressed some MP decision triggers, which in generic CM based kernels result in all 4 CPUs being online all the time. No wonder there was overheating.
I have also found that surprisingly the most lag free action is with Conservative governor. This is counter intuitive, but nonetheless true.. You try it and report
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13091
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Rom Updated on June 11. This is 5.1.1 release 4. Numerous changes, see DU update info in Settings:
Add USB Tether title
Various ThemeChooser fixes
Add Volume Rocker Swap button function
Add Wakelock Blocker
Add AOKP System /Listview Animations
Task Manager
Show 4G instead of LTE
Make headset notification dismissable
Allow all files over BT
Increasing ring volume
Unlink ringer and notification volumes
ADB over Network tile
Compass tile
PIN keypad shuffler
My own hardened features
Kernel with TWRP 2.8.0; overclocking, voltage, sound and kcal
Fixed Camcoder mike low recording level
Fixed Thermanager to address low charging and flickering
DOWNLOAD: http://forum.xda-developers.com/devdb/project/dl/?id=12979
___________________________________________________________________________________________________
Here is the latest Dirty Unicorns LP 5.1.1 unofficial compiled from sources on May 25. The lightest rom - only 252 mb in zip. All hardened features enabled including:
1. Removed nefarious IPs (Google, AT&T, Department of Defence and others from over 30 files in sources)
2. Hardened kernel features
3. 256 bit data encryption
4. Background WIFI scanning disabled
5. VOLTe (voice over LTE) provisioned
6. Restoring network selection is handled by system, as opposed to modem (the less control to modem, the better)
7. Latest CM and DU sources
Instructions:
1. Unlocked bootloader, root and recovery
2. Enter recovery, wipe /System/Cache/Data
3. Flash the rom and reboot
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12638
WARNINGS: I am not responsible for your device turning into a paper weight. You are on XDA, which means if anything goes wrong, blame yourself (and Putin)
Credit: DU Team; Slimroms for kernel and CM
XDA:DevDB Information
Dirty Unicorns Lollipop 5.1.1, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP; CyanogenMod
Version Information
Status: Testing
Created 2015-05-26
Last Updated 2015-10-13

New Kernel: Sound, Voltage, Color, Overclock
Here is a new kernel, which is based on CM12.1/M5
New Features:
1. All hardened features included
2. Overclocked to 2457
3. Voltage, Screen Color, Sound
4. TWRP 2.8.0 in boot image
5. Kernel compiled in DU5.1 build environment (with DU ram disk), as opposed to
generic build, which may cause issues because of different init files
Here is my voltage table, which is pretty stable:
300 mhz 730
422 mhz 740
652 mhz 760
729 mhz 770
883 mhz 790
960 mhz 805
1036 mhz 815
1190 mhz 835
1267 mhz 845
1497 mhz 855
1574 mhz 860
1728 mhz 870
1958 mhz 885
2265 mhz 955
2342 mhz 965
2457 mhz 980
Instructions: Unzip boot.img and flash in fastboot:
fastboot flash boot boot.img
fastboot reboot
Credit to MyselfM5 and to anyone who contributed to overclocking/sound/screen color
Source: https://github.com/HonamiZ1/android_kernel_sony_msm8974

soon i test this rom very thanks for the work

I have run this rom for about 24 hours and here are my impressions:
Most stable rom so far and I have tried them all. Also, good on battery. Flickering issue has been definitely fixed (by CM) and I have used their honami device with new values in thermanager. It was not easy to build, but doable, as opposed to Omnirom, which as of now, has no chance for our device. Thanks to DirtyUnicorns, they have a separate calf branch which is suitable for Z1. Don't try to use another kernel with this rom unless you copy modules too. This kernel has screen, sound settings, but no voltage, and I don't recommend tinkering with default values. I have also given up on TWRP 2.8.6, as it has major bugs resulting in overheating and failure to backup/restore. Use any version below.
The rom requires some tinkering: as such, Adaway defaults to disabled on reboot, because of DirtyUnicorn's internal adblock. If like myself, you like Adaway more, then disable adblock in Dirty Tweaks and also delete /system/etc/hosts.alt file. This way, Adaway will work fine.
A separate word on battery. It takes me 3-3.5 hours on OEM charger for a full charge from about 16%. If it takes you more or less, don't blame the rom/kernel, it is your battery dying. Forget about fast charging, it will do nothing good and for sure will destroy the battery. Heat just kills it like nothing else. If the charging is slow, the battery can't get the required voltage and the phone wouldn't report it fully charged. If it is too fast, that means that it attained the required voltage, but holding capacity has been severely reduced, which in turn means, the battery won't hold the load. Trust me, I have recently put a new battery (and new battery door) after using the phone for less than a year. Changing the battery was not a pleasant experience (the sticky they put on glass did not hold, so, I had to use glass glue,.) Why it was a battery? Because, while the phone would say battery heath is good, youtube wouldn't last for more than 20 minutes. Considering that the phone appeared in 2013, that's a miserable battery life, bit it was my fault: too much flashing and heat.

Screen freezes?
Any screen freezes on this ROM? Stayed away from AOSP cause my panel has issues with it. Would be nice to have a ROM which doesn't freeze

Wow, I've been waiting for this!
The only thing that's bothering me now is the lack of advance WiFi and Bluetooth option in the tiles (no arrow below WiFi and Bluetooth icon).

What things do or do not work? I honestly want to flash this so bad, but I'm afraid I might want to go back to my previous ROM when I find out my camera/shutter key doesn't work :/
I'm running a debloated version of the stock ROM, and I'm looking into this for an even lighter experience.
Thanks!

Quick question regarding C6902...would it be required to flash the modem separately like before on kitkat? Or has that been integrated into the rom?
Thanks.for understanding

kpbotbot said:
What things do or do not work? I honestly want to flash this so bad, but I'm afraid I might want to go back to my previous ROM when I find out my camera/shutter key doesn't work :/
I'm running a debloated version of the stock ROM, and I'm looking into this for an even lighter experience.
Thanks!
Click to expand...
Click to collapse
Camera shutter button will never work on AOSP. Just saying.

LOL. I just checked the camera hardware button and it works...

optimumpro said:
LOL. I just checked the camera hardware button and it works...
Click to expand...
Click to collapse
The launch from sleep?

AnrgKrshn said:
The launch from sleep?
Click to expand...
Click to collapse
Not the launch, but shutter...

optimumpro said:
Not the launch, but shutter...
Click to expand...
Click to collapse
I thought he meant the launch

Camera Mike Low Level Fix
This takes care of low level camera sound recording:
http://forum.xda-developers.com/xperia-z1/themes-apps/camera-low-recording-sound-permanent-fix-t3121958/post61044646#post61044646
Enjoy...

I had this bug in all 5.1 ROMs where the camera preview would work fine in low light but after pressing shutter, the photo would come out dark.
Is it still here in this ROM?

Hi, have some problems installing. When I install it seems to remove recovery and I think the efs as well since the network doesn't work at all. I've flashed it three times, each time losing recovery and having to flash the stock rom back. Thanka for your help

Reserved

bigmeech084 said:
Hi, have some problems installing. When I install it seems to remove recovery and I think the efs as well since the network doesn't work at all. I've flashed it three times, each time losing recovery and having to flash the stock rom back. Thanka for your help
Click to expand...
Click to collapse
Just do a search for Xperia Z1 recovery fota solution or fastboot any kernel with good recovery.
I don't know what efs is, but I have absolutely no network/wifi problems: works straight on boot. If you have C6902, you need to flash a file that is posted in general section.

Kernel with TWRP integrated
http://forum.xda-developers.com/showpost.php?p=60569243&postcount=136
Here is a 5.1 kernel with TWRP integrated.
Unzip it and flash in fastboot: fastboot flash boot boot.img
Remember, if you have TWRP in FOTA, don't flash this one, because you wouldn't be able to get to recovery at all.

optimumpro said:
Just do a search for Xperia Z1 recovery fota solution or fastboot any kernel with good recovery.
I don't know what efs is, but I have absolutely no network/wifi problems: works straight on boot. If you have C6902, you need to flash a file that is posted in general section.
Click to expand...
Click to collapse
Thank you. It's c6902, Could you direct me to the file Im meant to flash? Maybe efs is the wrong term, but no network and when I dial *#06# to check imei, it doesn't send a code back and doesn't seem to recognize a Sim, reflashed to stock and got network back

LineageOS 14.1 | 27.11.2019 | Shield blobs EOL

LineageOS 14.1​
FOR ROMS RELEASED BEFORE NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
Instruction
1) flash BootBlobs-SHIELD-mocha.zip
2) reboot to recovery
3) install this recovery
4) reboot to recovery
5) install the ROM
FOR ROMS RELEASED AFTER NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
3) BRAIN, READING SKILL and presence of basic knowledge about firmware (in the absence need learn to independently)
Instruction
1) download TosForPSCI-0.1.zip
2) unzip TosForPSCI-0.1.zip
3) download recovery-03.11.2018
4) go to fastboot mode
5) execute command: fastboot flash tos your path to tos.img
6) execute command: fastboot flash recovery your path to recovery-03.11.2018.img
7) reboot to new recovery(u can execute fastboot reboot holding vol+ button)
8) if you are on previous LineageOS 14.1 build then you may install the ROM without wipes. If you're not, make full wipes then
9) install current LineageOS 14.1 build
10) reboot to the system
Sources
Device
Kernel
Vendor
Changelogs
27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
28.10.2019
system:
- the latest security patch by LineageOS team
- Trebuchet replaced by Launcher3
kernel:
- all changes since release in December 2018
28.12.2018
system:
- the latest security patch
kernel:
- a little bit updated sdcardfs
- fixes of defects after switching to the new Synaptics touchscreen driver
03.11.2018
system:
- the latest security patch
- added tile for activatingdeactivating battery charging
kernel:
- new Synaptics touchscreen driver(possibly less lags)
- a little bit updated sdcardfs
- fixed a couple of security issues when using root
- PSCI downgraded to version 0.1
28.09.2018
system:
- the latest security patch
kernel:
- reworked binder driver(the system should be more stable)
19.08.2017
system:
- the latest security patch
kernel:
- dvfs driver was heavily updated(better power consumption)
- binder was updated
- therm_est thermal sensor was fixed
24.07.2018
system:
- source code was updated
- changes for devices with 3Gb RAM
kernel:
- added new driver(written by me) for reducing cpu power consumption in suspend mode.
- panel driver was changed for reducing power consumption in suspend mode
- palmas gpio driver was changed for reducing power consumption in suspend mode
18.06.2018
system:
- source code was updated
kernel:
- spectre patch by nvidia
- other small changes
21.05.2018
system:
- source code was updated
- usb internet sharing was fixed
- other small changes
kernel:
- sdcardfs was updated to the 3.18 kernel level.
- ability to change display colors was added
14.04.2018
system:
- sdfat was added(instead of vfat and exfat)
- audio HAL was updated(like in 15.1)
- 64-bit binder was returned
kernel:
Los14.1 and Los15.1 use an unified kernel for now. All updates from 15.1 are inside.
16.03.2018
kernel:
- usb otg for flash drives was fixed
- problems with battery percentages was fixed
09.03.2018
kernel:
- based on official rel-24-uda-r1 branch
- updated binder
system:
- we are using 64-bit binder for now
- updated sources
Broken:​- Cameras
Download:​Touchscreen hotfix for ROM released at 29.12.2018
ROM folder
Last build
XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi Pad
Contributors
Artemka2008
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2018-10-05
Last Updated 2020-03-09

27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
What is "tile for activating\deactivating battery charging"?
- this is system icon(like performance profiles) which permits\prohibits the supply of current to the battery at the time when the charger is connected.
Why do we need that tile?
- if you play, watch a movie or perform another costly action, then activating this mode will save the battery from unnecessary wear because energy will go directly from the charger. But you need a fairly powerful charger, if the power of the charger is not enough, then partially the consumption will be compensated by the battery.
What happens if you do not install TosForPSCI-0.1?
- at best, only one CPU core will be active. At worst, the recovery will not be started (if it has not been updated too) and the system too.
How to roll back on the firmware version, which came out before November?
- download TosForPSCI-0.2 and recovery. You'll be able to flash older ROMs after installing them
Why do I need to lower the PSCI version from 0.2 to 0.1?
- Using version 0.1 fixes a problem with shutting down a device.

Finally!an XDA thread.big thanks to Artemka2008

finally on xda thread!!big thanks to this rom contributor.
Best Rom for mi pad 1,dirty flash from previous build,works like a charm

Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.

Tautologica said:
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
Click to expand...
Click to collapse
i lost 4-5% around 9 hours deep sleep mode with wifi turned off + greenify
thats pretty good i guess

Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .

pussel said:
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .
Click to expand...
Click to collapse
Your battery is not calibrated.use any app or fully discharge and charge to 100% 2 or 3 times and this will be fixed.issue and remedy common with new rom flash

hello,my battery is jump to 0 from 30-40

I've been on update 8 (2018/06/18) for months and Mipad finally stuck at LOS logo. Please tell me why.
Clean install (update 11) done, the issue's still there after a couple of days. Actually, I only need to do factory reset to fix this.

Hi guys, any news about camera patch?
Thanks ?

velociraptor68 said:
Hi guys, any news about camera patch?
Thanks
Click to expand...
Click to collapse
Forget about cameras

Why? ?

velociraptor68 said:
Why?
Click to expand...
Click to collapse
Because

Artemka2008 said:
Because
Click to expand...
Click to collapse
Eh eh eh ? the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom? ?

velociraptor68 said:
Eh eh eh the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom?
Click to expand...
Click to collapse
Stop writing stupid things pls

stupid me who doesnt read helps you guys to test what will happen if dont install the TOS patch...
it will install and boot without any issue... BUT if it is not connected to charger and once you off the screen, it turns off.
I tot my battery is dead but then I go back and read the whole thread again then realize there is a new instruction for installing new ROM... so guys... please read the whole thread next time... haha...
different device might have different results but this is what happen to mine...
---------- Post added at 01:17 PM ---------- Previous post was at 01:00 PM ----------
I found the on-screen navigation toggle (under button right?) is missing. Is it being removed in the latest version or i mess something up again? FYI, i did a clean install.

Hi, I installed last rom 03.11.2018, it is very smooth. I try to record audio by microphone, but don't work... instead google assistant understand my voice.
Thanks

I would like to try this ROM, does it have gapps and root already integrated?
Let me answer my question: no, gapps and root need to be installed separately.
This ROM is wicked fast and smooth!

Im in AOSP extended oreo right now. Can i install this rom directly?

[Pro/Plus] F1XY Kernel [4.4] [1.14] [Feb 19]

Introducing 4th iteration of F1XY Kernel.​REQUIREMENTS
ROM compatible with msm-4.4, if it runs fine - you are good to go.
Clear mind.
Steardy hands.
Features
Using msm-4.4 kernel source, originally intended for SD660/835. Pie CAF release.
Lots of security improvements.
Kernel improvements from our lord and savior.
Scheduler improvements for better battery life.
Improved CPU freq control.
Faster wakeup.
A bit relaxed CPU throttling.
Improved charging driver for smoother battery charge/discharge.
Boeffla's wakelock blocker.
Latest F2FS and CFQ updates.
NET improvements + Wireguard.
Built with Clang 9.
Contributors
Kenny
Davide
Cooler Davide
Everyone in source: (will takes ages to load)
Subscribe to PewDiePie
Download
1.14: AFH - version for /factory -|- AFH- version for /vendor
1.13: AFH - version for /factory
1.13: AFH - version for /vendor
1.11: AFH
1.10: AFH
1.09: AFH
1.08: AFH
1.07 - skipped.
1.06: AFH
1.05: AFH
1.04 - skipped due to a big testing cycle.
1.03: AFH
1.02: AFH
Donations:
Sadly, due to PayPal's restrictions in my country I can't receive direct donations, however, I have a good friend in Russia, who's PayPal is not restricted and who will forward your donations to my debit card.
https://www.paypal.me/xeondead - add note "to Yaro"
XDA:DevDB Information
F1XY-4.4, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
Star_king12
Source Code: GitHub
Kernel Special Features:
Version Information
Status: Stable
Created 2018-11-13
Last Updated 2018-11-13

Changelogs will live here:
1.02 -> 1.03:
1. Improved GPU frequency control, you should see less lags/stuttering now.
2. Decreased CPU boost.
3. Deleted a few unneeded drivers (sound and touchscreens).
4. Killed IPA_WS wakelock.
5. Fixed some touchscreen regressions after 4.4 update. Wrong coordinates reporting should be fixed
1.03 -> 1.05:
1. EAS.
2. 4.4.165 and CAF updates.
3. Improved fingerprint scanner stability.
4. Zram improvements.
5. Added SimpleLMK (giving it another try).
1.05 -> 1.06
1. 4.4.166
2. Removed SLMK, no more lockups.
3. Disabled unused I/O schedulers (deadline, test)
1.06 -> 1.08
1. Upstream and CAF updates.
2. Reverted a lot of EAS commits (battery life should improve)
3. Fixed pocket mode.
4. Fixed a few memory leaks.
5. Fixed Hi-Fi sound.
6. HZ set to 1000.
1.08 -> 1.09
1. Some EAS updates.
2. Fixed Wi-Fi that died after 08 for some of the users.
3. Some camera improvemements from OnePlus 5.
1.09 -> 1.10
1. Camera issues should be gone now.
1.10 -> 1.11
1. Upstream (now with f2fs patches, some bugfixes and stuff)
2. VNDK support.
3. Fixed some memory leaks.
4. Medium overhaul of changes that were done in the past 1-2 months, filtered unused commits and organised everything better.
5. Improved touchscreen wake-up speed slightly.
1.13 is based on 1.10 (and thus 1.09), so changelog is relative to 1.10.
1. As always, EAS updates.
2. Upstream, CAF and kernel/common updates.
3. Fixed some memory leaks.
4. Faster touchsceen wakeup and suspend.
5. Improved performance by decreasing the amount of debug.
6. F2fs updates and improvements.
1.13 - > 1.14
1. Underclocked slightly further (1.4/1.78 GHz are new freqs)
2. Fixed an issue when phone's mic would die when a mic-less headphones were plugged in.
3. Removed an audio improving driver (didn't really improve anything).
4. Some toolchain optimizations enabled.

Guess I'll do it like this.

Seems fine, ty for the kernel from feheroroszorszag

Wew

Eyyyyy
Guess I'll take a reserve too
Edit: Time to use the reserve for a 1st page day 1 review
The kernel is working really well, with everything on stock because of no kernel tweaking.
The biggest improvement is probably standby batterylife and heat, for some reason other 4.4 kernels are really bad at this, resulting in around 20% battery loss overnight
The bad news is that USB tethering is still not working for me on all 4.4 kernels, including this one, so there's that

Slow charging Speed

Treble or non-treble

Faceless Sprit said:
Treble or non-treble
Click to expand...
Click to collapse
Treble

Yay.. too excited to test it. Can it have spectrum support..?

RaZoR747 said:
Yay.. too excited to test it. Can it have spectrum support..?
Click to expand...
Click to collapse
No.

Star_king12 said:
Guess I'll do it like this.
Click to expand...
Click to collapse
Impressive

hello @Star_king12, my device has a rare problem where most of the time when I try to scroll it registers a touch and while playing PUBG the trackpad stutters.
Only your F1XY CAF rev5 kernel fixed it for me and whichever rom I switch your kernel is the only solution.
Now with 4.4 kernel trend, I thought I could use F1XY4.4 for the hiccups but it missed out on the charm which the "3.18 caf rev5" had. So kindly implement the previous fix in your 4.4 edition too.
Need any testing or logcats, ready to cooperate.

zhhaa said:
hello @Star_king12, my device has a rare problem where most of the time when I try to scroll it registers a touch and while playing PUBG the trackpad stutters.
Only your F1XY CAF rev5 kernel fixed it for me and whichever rom I switch your kernel is the only solution.
Now with 4.4 kernel trend, I thought I could use F1XY4.4 for the hiccups but it missed out on the charm which the "3.18 caf rev5" had. So kindly implement the previous fix in your 4.4 edition too.
Need any testing or logcats, ready to cooperate.
Click to expand...
Click to collapse
I wish I knew what fixed it in that kernel. I'm aware of that issue and we are working with other devs to fix it, however since none of us have a device with such touchscreen, so it's way harder.

Star_king12 said:
I wish I knew what fixed it in that kernel. I'm aware of that issue and we are working with other devs to fix it, however since none of us have a device with such touchscreen, so it's way harder.
Click to expand...
Click to collapse
Can give me your telegram ID we can discuss in detail there and I can be your goto tester.

zhhaa said:
Can give me your telegram ID we can discuss in detail there and I can be your goto tester.
Click to expand...
Click to collapse
I already have 3-4 testers but there isn't much progress.

Installed Kernel on aex 6.0. At the moment everything is going great and solved the problem of charging. At the moment the performance is good without any problem. Later I will try if it is possible to connect the zuk to the computer. Thank you very much for your work.
Enviado desde mi ZUK Z2131 mediante Tapatalk

sivandra said:
Installed Kernel on aex 6.0. At the moment everything is going great and solved the problem of charging. At the moment the performance is good without any problem. Later I will try if it is possible to connect the zuk to the computer. Thank you very much for your work.
Enviado desde mi ZUK Z2131 mediante Tapatalk
Click to expand...
Click to collapse
How did you the charging problem ???

Direct install this kernel 3.18 to 4.4

RakeshDh!1 said:
How did you the charging problem ???
Click to expand...
Click to collapse
With Aex 6.0 new version, There was a problem during charging, you had to have the screen turned on to charge the battery. Installing this Kernel has solved the problem.
Enviado desde mi ZUK Z2131 mediante Tapatalk

[Kernel][04.01.2022][Android 11] Kirisakura 1.0.0_R for Asus Rog Phone 2 aka Yoda

Kirisakura-Kernel for the Asus Rog Phone 2
Hello everyone,
I proudly present Kirisakura-Kernel made for the Asus Rog Phone 2 aka Yoda!
Kirisakura - Kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
This project aims to keep most of the subsystems updated, way ahead of the stock kernel, thereby improving security and performance, while keeping stability as the foucs during testing! This includes Linux-Stable, CAF-Upstream and kernel/common.
Kernel Control Flow Integrity (Kernel-CFI), which is achieved by linking the kernel with LLD and Link Time Optimization (LTO), more precisely ThinLTO, are quite unique security features. In fact this may be one of the only 4.14 msm kernels with a fully working Kernel-CFI implementation and CFI-Violations fixed on a smartphone.
The only kernels made by OEMs offering this security feature are the ones for the Pixel 3 and Pixel 4 devices.
If that got you curious,have a read about Linux-Stable and why it is important here. The stable-process is not the same for every subsystem, but the general idea, rule of thumb and benefits are applicable for other subsystems as well.
Quick explanation of CAF-Upstream. CAF is short for Codeaurora-Forums. This is the place where development from Qualcomm for their SoCs happens. This includes the Snapdragon 855+ that´s built into the Asus Rog Phone 2.
The kernel-bases available on the Codeaurora-Forums, are basically the foundations OEMs use to build their own kernel additions on top, for devices featuring Qualcomm SoCs.
The Qualcomm developers push regular updates to the bases of the different SoCs, a bit similar to how Linux-Upstream works. OEMs usually stop updating the initial base after the phone is released.
This kernel focuses amongst others to provide the latest CAF-Updates merged in a regular manner, to provide updates, improvements and enhancements for SoC specific drivers and subsystems! This might take a while, because a lot of device specific testing is done on my end to ensure stability.
The kernel includes a lot of improvements and contributions from other developers as well. Without this kernel would not exist.
Many others contributed in some way or another to this kernel.
A big thanks to all of them at this place!
Now lets continue with a list of features in the next paragraph!
Main Features:
- Based on latest kernel sources from Asus for Android 11 and intended for use on Asus Stock Rom
- compiled with Clang 13.0.1 and built with -O3 speed optimizations
- Linux-Stable-Upstream included to 4.14.243
- CAF-Upstream merged
- Link the kernel with LLD and use KASLR
- include all important fixes/improvements from kernel/common
- F2FS implementation updated to latest state of kernel/common and kernel.org maintained by Jaegeuk Kim.
- Safety Net patches are included -> Kernel passes Safety Net
- Flashing the kernel will keep root!
- Sweep to sleep functionality
- Flashable via EXKM and FKM on a rooted system!
- specifically tuned EAS for the Asus Rog Phone 2
- removed nolog usage, remove rtb logging from the kernel
- remove selinux auditing from kernel for lower overhead
- remove IPC logging from the kernel
- Anykernel zip is based on the all new Anykernel3 release from @osm0sis
- option for 144hz refresh rate (Android 10 only)
- option to improve visibility in dark scenes
EAS related features:
- EAS implementation patched up to latest CAF state
- disable autogroups and use cgroups for more efficient task placement!
- Dynamic Stune Boost to inflate task utilization and not overload cores on interaction (thanks to @RenderBroken and @joshuous )
- improved schedutil governor
- updates from kernel/common
CPU related features:
- Power saving workingqueues enabled by default
have a read here: https://lwn.net/Articles/731052/
this complements EAS in general
- Change various drivers (WLAN, MM, audio, charger, power, thermal, glink etc) to user power efficient workingqueues. This should work well in conjunction with EAS
- include cpuidle patches from CAF
- improvements to cpufreq/times/stats
- vDSO 32 patches to improve 32-bit performance
- arm64: lse: Prefetch operands to speed up atomic operations (thanks to @kdrag0n )
File System related features:
- F2FS implementation updated to latest state of kernel/common and F2FS-Mainline on kernel.org maintained by Jaegeuk Kim.
- Include rapid GC by @arter97 ( best thing is to read the commit description linked here. I compared GC on stock google f2fs, upstreamed f2fs and f2fs with rapid GC. Rapid GC is the most effective, followed by upstreamed f2fs.)
- adapt F2FS to be inline with Pixel 4s code from Google, which is also directly maintained by Jaegeuk Kim
- include a few F2FS fixes from the Pixel 4 kernel
- include optimizations to UFS-Driver from Pixel 4
- various improvements to FS-Performance from the Pixel 4
- f2fs fix to prevent data loss in case of sudden power failure
GPU related features:
- Update GPU driver to latest CAF state
- remove debugging and non-sd855+ specific code from the GPU driver
- introduce low priority worker thread to improve performance in UI-critical situations
Network related features:
- Wireguard Support (Details)
- advanced TCP algorithms enabled
- includes new bbr and bbr2
Memory related features:
- Speculative Page Faults (1. 2) (CAF default)
- enabled per process reclaim (CAF default)
- Fix various memory leaks in different subsystems
- improved mm with patches from latest mainline
- various other changes from mainline
- included zstd and lz0-rle as options for ZRAM-algorithm (lz4 is probably the best all around, so only change it if you know why and what you are doing)
- allow swappiness up to a value of 200
- remove unused mem regions to free more RAM (thanks to @kdrag0n )
Security related features:
- Control-Flow-Integration (CFI) andLink-Time-Optimization (LTO) ported from 4.14 kernel/common and Pixel 4 Kernel
- Shadow Call Stack ported from 4.14 kernel/common and Pixel 4 Kernel
- enable init_on_alloc for even more security, more information can be found in the commit message
Misc Features:
TCP Congestion Algorithms:
- advanced algorithms enabled
- includes new bbr2
Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- please read [URL="https://arstechnica.com/gadgets/2018/08/p-is-for-power-how-google-tests-tracks-and-improves-android-battery-life/"]this for further info
Other features:
- disable logging and debugging to make the kernel more lightweight in various places (includes binder, mm, vma, gpu, ipa etc)
- remove VLAs from the kernel (more info)
- add support for steam controller
- add support for nintendo switch controller
Feature section for the "non visible" but perceptible improvements:
- updated binder section (responsible for interprocess communication)
- updated sdcardfs ; have a read about it here:
- fix CFI violations
- add ramoops/pstore support (thanks @luca020400)
Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
- magisk root
- a backup of boot.img and dtbo.img to be able to restore to stock. you should be able to do this easily via TWRP.
How to flash the Kernel:
1. Download the latest kernel.zip and make sure you have properly updated to the latest Asus Firmware
1a. Optional: While it may not be necessary all times, you may want to restore stock boot.img and dtbo.img, re-root with magisk and optionally install twrp.zip if coming from another kernel. Before reporting issues make sure you do that! Thank you!
2. Make sure to use latest Magisk stable. (not the latest canary!)
3. Flash the kernel.zip via latest EXKM or FKM app, or TWRP (haven´t tested TWRP myself as I don´t need it) and do a full reboot.
4. Flash the kernel again. This step is needed because flashing the kernel disables verity on vendor in order to modify two files. Disabling verity takes a reboot. Flashing the second time allows the two files to be changed correctly. This step is necessary if you flashed a firmware update. (This step should not be necessary when updating my kernel, if you are already running it, but if you want to be on the safe side just flash it twice)
5. Reboot and profit. It will take around 15 seconds for the kernel and the system to execute all changes done by flashing the kernel.zip. After 15 seconds 120fps will kick in, if you use 120fps setting!
DOWNLOAD:
Download is located always in this folder:
https://www.androidfilehost.com/?w=files&flid=303784
Important: Read after Download
Please take a look at the second post after flashing the kernel!
Changelog:
Android 9
1.0.0 Initial Release
1.0.2 https://forum.xda-developers.com/showpost.php?p=81389411&postcount=33
Android 10
2.0.0 https://forum.xda-developers.com/showpost.php?p=82238713&postcount=141
2.1.0 https://forum.xda-developers.com/showpost.php?p=82317211&postcount=191
2.6.0 https://forum.xda-developers.com/showpost.php?p=82495531&postcount=252
2.6.2 https://forum.xda-developers.com/showpost.php?p=82560081&postcount=261
2.6.4 https://forum.xda-developers.com/showpost.php?p=82602927&postcount=267
2.7.2 https://forum.xda-developers.com/showpost.php?p=82834055&postcount=281
2.7.5 https://forum.xda-developers.com/showpost.php?p=82837791&postcount=285
2.9.0 https://forum.xda-developers.com/showpost.php?p=83100663&postcount=306
3.0.6 https://forum.xda-developers.com/showpost.php?p=83526987&postcount=391
3.1.0 https://forum.xda-developers.com/showpost.php?p=83606511&postcount=406
3.1.3 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-84124933
3.1.5 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-84617449
3.2.0 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-84717691
3.2.1 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-84799241
3.2.2 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-85145887
3.2.3 https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-85431627
Android 11
1.0.0_R https://forum.xda-developers.com/t/...us-rog-phone-2-aka-yoda.4028237/post-86201183
Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee
If you like my work: http://paypal.me/freak07
Credits:
Asus for the Rog Phone 2
@osm0sis for all his work, including the ak3 installer!
@tbalden for being the best HTC wingman!
@LeeDroid for his awesome roms!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me in the past!
@arter97 for giving me advice
@kdrag0n for his help too
@topjohnwu for magisk!
@osm0sis for anykernel!
XDA:DevDB Information
Kirisakura Kernel, Kernel for the ASUS ROG Phone II
Contributors
Freak07
Source Code: https://github.com/freak07/Kirisakura_Yoda

F.A.Q:
Question: Why does the kernel version show as "unavailable" in settings after flashing it.
Answer: Asus does not allow for custom kernel names in their settings. Use a kernel manager to check the kernel version.
Question: Is root preserved when flashing this kernel?
Answer: Yes the Anykernel Zip will detect root and keep it.
Question: How do I return back to stock or another kernel.
Answer: Extract boot.img as well as dtbo.img from matching firmware you are on and flash the extracted boot.img via fastboot.
Question: How to report bugs properly?
Answer: Have a look at post #3 in this thread. The linked guide is a pretty good starting point.
Before reporting any bug make sure you´re not using any mods, magisk modules, scripts or other modifications that alter various functions like sound mods, data traffic etc.
Try to describe the issue as detailed as possible! Give your exact setup, like rom, magisk version, kernel version.
Is the issue reproducible? Does it happen frequently?
Provide logs, otherwise debugging is a lot harder. If you can already reproduce the issue and provide logs it greatly limits the amount of time I have to spent until I figure out how to reproduce it.
If the device force reboots/randomly reboots (that means you see the bootloader unlocked screen!) provide a ramoops file.
Easiest way is immediately after booting up, with a root explorer navigate to sys/fs/pstore. Copy the contents to your internal storage, zip it up and send it to me.
If the issue happens while the device is running provide a dmesg plus a logcat that you take while/shortly after the issue happens. This will log what´s running in the current session. Try to be as detailed as possible what´s happening when the issue appears. It will also help me in reading the log!

Useful Resources
How to report bugs:
It is incredibly useful if bug reports are done in a proper way. That saves everyones time and will ultimately lead to a faster bugfix (hopefully).
The following guide from @nathanchance is a very good guideline on how to properly report a bug!
android-tools/guides/proper_bug_reporting.txt at main · nathanchance/android-tools
Publicly available Android stuff. Contribute to nathanchance/android-tools development by creating an account on GitHub.
github.com

and one more for me

Wow!!! Awesome! Plans for kcal in the future?

Thank you so much for giving me a reason to unlock the bootloader. Finally am happy to see development for the device and that too from a well known developer ???? cheers mate and a very happy new year.

Can I flash Android 10 beta fota file to my cn version phone using this recovery?

I love your work bro keep this devlopment continue
All rog2 user support your hardwork ,
And more developer will come after seeing your hardwork

a5he said:
Can I flash Android 10 beta fota file to my cn version phone using this recovery?
Click to expand...
Click to collapse
please help..now my device stuck and keep looping in bootloader mode after trying to flash this kernel on Android 10 beta fota..and i cant reboot into twrp recovery and system..

sakamaki izayoi said:
please help..now my device stuck and keep looping in bootloader mode after trying to flash this kernel on Android 10 beta fota..and i cant reboot into twrp recovery and system..
Click to expand...
Click to collapse
flash the boot.img extracted from the android 10 beta firmware via fastboot.
Kernel is made for Android Pie as stated in the OP.

Welcome bro and thanks for the first rog 2 custom kernel.. ?
After flashing in twrp it says i should flash companion magisk module. Is there one yet?

mohammed510 said:
Welcome bro and thanks for the first rog 2 custom kernel.. ?
After flashing in twrp it says i should flash companion magisk module. Is there one yet?
Click to expand...
Click to collapse
Oh that’s a remnant of another kernel in the flashing script.
No there is none needed. I’ll remove that message in the next release!
thanks for the hint!

You just gave me a reason to unlock my bootloader and go back to Pie
What a day! Thanks a lot @Freak07! I'm happy for you being around!
Cheers,
anthonws.

sakamaki izayoi said:
please help..now my device stuck and keep looping in bootloader mode after trying to flash this kernel on Android 10 beta fota..and i cant reboot into twrp recovery and system..
Click to expand...
Click to collapse
Extract the boot.img from Update and flash it under .img in twrp.
Goodluck

Very thanks
Please work on power saving and governor

Thank you for joining the ROG 2 Forums @Freak07
apollo3x said:
Extract the boot.img from Update and flash it under .img in twrp.
Goodluck
Click to expand...
Click to collapse
How to extract the Payload file of Android 10 FOTA?
The current Payload dumper doesn't support it.

Thank you so much for your hard work, I can't wait for you to make an version for Android 10 , hopefully once we have a custom kernel we can finally enjoy the 6000 mah battery

Mohamad313 said:
Very thanks
Please work on power saving and governor
Click to expand...
Click to collapse
avivv said:
Thank you so much for your hard work, I can't wait for you to make an version for Android 10 , hopefully once we have a custom kernel we can finally enjoy the 6000 mah battery
Click to expand...
Click to collapse
No idea about Android 10, but I’m enjoying the 6000mah on Pie already. That Android 10 build floating around is no finished or final piece of software.
I’ll attach my current stats from this morning.
No extensive gaming, mainly browsing, exploring the phone, massaging, videos, some calls etc.
but all on constant 120hz.

Wow that's great stats, when I had android 9 I the battery life was worst than I expected, if there was a way to rollback to android 9 without wiping the data I would have done it just to try this kernel.

would it be possible to add battery charge limiting support? currently apps like ACC don't work with this phone.

[Kernel][Pie-Ten] droopy-kernel [Weekly]

Code:
> Your warranty is now void.
> I am not responsible for bricked devices, dead
> SD cards, or any other mishaps. Please do some research or go through
> the source repo if you have any concerns about kernel
> before flashing it.
Features:
Energy Aware Scheduling
CFQ I/O Scheduler
Flar2'sSound Control
Boeffla Wakelock Blocker
Customized CAF CPU-Boost
Kerneltoast's Devfreq Boost
Joshuous' Dynamic Stune Boost
Some Upstreams, Backports and Optimizations
Download | Changelog
Credits:
[•] krasCGQ [•] joshuous [•] Renderbroken [•] Flar2 [•] osm0sis
[•] Kerneltoast [•] MihranT [•] kdrag0n [•] franciscofranco
XDA:DevDB Information
droopy-kernel for Asus Zenfone Max Pro M1 (Plus)
Contributors
ajaivasudeve
Source Code: https://github.com/ajaivasudeve/kernel
Version Information
Status: Stable
Created 2020-01-12
Last Updated 2020-01-12

Info:
Telegram Group | Telegram Channel | EAS
Boost Drivers | Schedutil | ROMs | MODs

Pro AF

Gawd

:highfive:

[26/01/2020]
Changelog:
• Merged lnx.4.4.211
• Scheduler improvements
• Removed some kgsl, mdss, mm modifications from Kerneltoast
• Removed smartboost mod
• Charger driver improvements
• Reduced dmesg logspam
• Restricted userspace from boosting CPU when screen is off
• Switched to ALMK from SLMK
• Checked out ALMK to android-4.4 branch from kernel/common
• Tuned ALMK for better experience
• Reverted to stock cdfingerfp drivers partially
• Updated wlan drivers to tag LA.UM.7.2.r1-08100-sdm660.0
[More..]
Download

Can this be used with Latest stock rom Pie 060?

sibikallikkat said:
Can this be used with Latest stock rom Pie 060?
Click to expand...
Click to collapse
haven't tested it myself, but yeah I have seen people use it on stock ROM

I am having idle battery drain issue (~20% drain overnight) on Stock ROM so, I tried this kernel with 060 firmware. The kernel is working perfectly (at least to the extent I used it) but it didn't solve idle battery drain. I am trying to find solution since 2 months. I also tried couple of ROMs and other Kernels and all the old firmware but none of them worked, no matter what I do, the problem is intact. So, now the only solution that I can think of currently is, completely restore my Phone and then go to Service Center.
Again, thanks for this awesome kernel. This is the only kernel that is being updated when most of the development for this device is already dead.

How to install this kernel
I am new in installing kernel but i have installed roms before

kk9999gada said:
I am having idle battery drain issue (~20% drain overnight) on Stock ROM so, I tried this kernel with 060 firmware. The kernel is working perfectly (at least to the extent I used it) but it didn't solve idle battery drain. I am trying to find solution since 2 months. I also tried couple of ROMs and other Kernels and all the old firmware but none of them worked, no matter what I do, the problem is intact. So, now the only solution that I can think of currently is, completely restore my Phone and then go to Service Center.
Again, thanks for this awesome kernel. This is the only kernel that is being updated when most of the development for this device is already dead.
Click to expand...
Click to collapse
Do onething, remove fingerprint authentication and use the device like you usually do. The idle drain should reduce. Also if you can, track wakelocks using BetterBatteryStats. That would help recognize what drains the battery.

abhiv965580 said:
I am new in installing kernel but i have installed roms before
Click to expand...
Click to collapse
Just flash the provided zip file using twrp recovery, reboot. That's it.

23/02/2020
Changelog:
• Merged linux stable 4.4.214
• Merged CAF tag LA.UM.8.2.r1-05700-sdm660.0
• Moved to exfat fs drivers
• Haptic strength is now adjustable from userspace
• Brought back RT EAS integration
• Added backlight dimmer
• Brought back kerneltoast mdss, kgsl, mm optimizations
• Brought back CAF lmk changes
• Reduced boost duration
• Updated flasher package, should preserve magisk now.
• Fixed minor camera issues in some ROMs
• Reverted to tfa driver v6.5.0
[More]..
Download

ajaivasudeve said:
Do onething, remove fingerprint authentication and use the device like you usually do. The idle drain should reduce. Also if you can, track wakelocks using BetterBatteryStats. That would help recognize what drains the battery.
Click to expand...
Click to collapse
Thanks for reply.
Well, I'm not using Fingerprint authentication since Pie update. So, Something else is causing the issue. In fact, this issue started suddenly in (i guess) mid November. I have also tested idle drain on MSM Xtended, crDroid, Ion OS etc ROMs and Kernels namely Stardust, Singh, PBH and Droopy but the issue is same across. I have also tried Official Android 10 beta but the results are same. I also downgraded to Oreo 340 update but didn't helped. I also tried every Official Pie update till date.
You can take a look my Post #2 on Asus forum for BetterBatteryStats:
https://www.asus.com/zentalk/in/forum.php?mod=viewthread&tid=301145&extra=page=3&mobile=2

kk9999gada said:
Thanks for reply.
Well, I'm not using Fingerprint authentication since Pie update. So, Something else is causing the issue. I have also tested idle drain on MSM Xtended, crDroid, Ion OS etc ROMs and Kernels namely Stardust, Singh, PBH and Droopy but the issue is same across. I have also tried Official Android 10 beta but the results are same. I also downgraded to Oreo 340 update but didn't helped. I also tried every Official Pie update till date.
You can take a look my Post #2 on Asus forum for BetterBatteryStats:
https://www.asus.com/zentalk/in/forum.php?mod=viewthread&tid=301145&extra=page=3&mobile=2
Click to expand...
Click to collapse
Can you give me screenshot of kernel wakelocks page from better battery stats?

ajaivasudeve said:
Can you give me screenshot of kernel wakelocks page from better battery stats?
Click to expand...
Click to collapse
I'll give it in 1 day. I have reverted completely to Stock and Upgraded to Android 10 Official beta. I'll need to give permission to BBS via adb and then wait for 1 day to collect stats.

ajaivasudeve said:
Can you give me screenshot of kernel wakelocks page from better battery stats?
Click to expand...
Click to collapse
Here are the Screenshots of BBS on fresh installed Android 10 Official Beta - no Google Account added, no Third-party apps installed, No Sim/MMC inserted, WiFi ON all the time.

kk9999gada said:
Here are the Screenshots of BBS on fresh installed Android 10 Official Beta - no Google Account added, no Third-party apps installed, No Sim/MMC inserted, WiFi ON all the time.
Click to expand...
Click to collapse
Seems like your battery has degraded. get it checked at a service center. Good luck!

So far, so good, Running on StockMod Rom (.60 version)
Double Tap to Wake is not working though, I hope this will be fix on next update
:good::good: