Code:
[B][U]Disclaimer:[/U][/B]
I am not responsible for any damage to you your device. Everything you do, you do on your own risk!
Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone.
Unfortunately the ROMs for SM-T560NU tabs are not working on that device, but I found a working ROM of LineageOS 14.1 (Android Nougat 7.1.2) on the following page:
How to install Android Nougat on the Galaxy Tab E (SM-T561)
Click to expand...
Click to collapse
Original source (Russian language)
Click to expand...
Click to collapse
LineageOS 14.1 (formerly known as CyanogenMod) ROM is based on the Android stock ROM released by Google, which the LineageOS team modifies.
Credits go to the LineageOS team for making this ROM available to many devices and to independent developers like Ma3a_XaTa for porting this ROM to the Tab E SM-T561.
Click to expand...
Click to collapse
Just installed it to my tab and it seems working well!
I used the instructions from a comment at the bottom of the page:
Downloads:
ROM: LineageOS 14.1
Gapps: The Open GApps Project
Boot Image: boot.img
SoftKeyFix: KeyFix
Recovery: TWRP Recovery for Tab E
Root: SuperSU
Click to expand...
Click to collapse
Prerequisites:
1. Make sure you have TWRP 3 installed (HowTo)
2. Move the downloaded files to your Micro SD Card (>4GB recommended)
3. >50% battery charge
4. Some patience.
Click to expand...
Click to collapse
Installation:
1. Boot to TWRP 3 (Power + Home + Volume Up) and Swipe to allow modifications
Note: Make sure to Backup EFS and Modem to Micro SD Card in TWRP.
2. Wipe > Advanced Wipe > (Select Dalvik Cache, System, Data, Internal Storage, Cache ONLY) > Swipe to WIPE
3. Install > Select Storage > Micro SD Card > Select lineage-14.1-20180419-UNOFFICIAL-gtel3g.zip
4. Add More Zips > open_gapps-arm-7.1-pico-2018xxxx.zip
5. Add More Zips > keys.zip
6. Swipe to confirm flash and wait for 5-10 mins
7. After the Flash process DO NOT restart system.
8. Go back to Install > Install Image > boot.img > Select Boot Partition > Swipe to confirm flash
9. After the boot.img has been flashed DO NOT restart system IF you want Root.
10. Go back to Install > Install Zip > SR3-SuperSU-v2.82-SR3-20170813133244.zip > Swipe to confirm flash
11. Now Restart System.
12. Wait 10-15 mins, it will take some time.
13. Enjoy Lineage OS!
Click to expand...
Click to collapse
Known bugs:
- Charging while the device is off works, but does not show battery charge indicator animation.
Click to expand...
Click to collapse
Good luck and enjoy!
Code:
[B][U]Miscellaneous:[/U][/B]
[URL="https://www.hardreset.info/devices/samsung/samsung-t560-galaxy-tab-e-96-wifi/download-mode/"]HowTo bring the Tab to DownloadMode[/URL]
Hints & Tips:
1. To improve the speed of the tablet, turn of animations inside Developer Options.
2. You can also install an app freezer called "Icebox" to temporarily disable RAM hungry apps like Facebook, Chrome etc.
3. To ensure longer battery life, disable “double tap to wake” hidden somewhere in the settings (use the app called "Kernel Adiutor" from the Playstore).
4. If you don’t plan to put a SIM on this thing or if you are having a SM-T560 only, put it in airplane mode and then turn on your WiFI when needed. Turn of GPS/location or even sync when not necessary.
5. Disable "Adaptive Display" in the settings. It seems to make the tablet slower.
6. Improve the battery life of the tab by using an app called “L Speed“ (available in Playstore).
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
mimuta said:
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
Click to expand...
Click to collapse
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
SeeDoubleYous said:
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
Click to expand...
Click to collapse
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
V3rdeV1ntage said:
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
Click to expand...
Click to collapse
What version of TWRP are you using & what error do you get?
Have someone passed safetynet check ? Can you help me with pass?
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Problems of ignition and charge of battery
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
s5minimalist said:
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Click to expand...
Click to collapse
I have my T560 all the time in airplane mode with Wifi on. Battery drain is no problem at all.
It is also written in my second post:
HTML:
https://forum.xda-developers.com/showpost.php?p=78977223&postcount=2
aribetty said:
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Click to expand...
Click to collapse
I had a similar problem in the beginning. Seemed as the tab was in a bootlooporsomething similar with black screen.
The only solution I found was to wait some days until the battery was empty, charge the tab and directly started to download/recovery mode and flash it again.
Now it is working fine with this ROM.
Rittachi said:
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
Click to expand...
Click to collapse
I am using it now for ~2.5 months and I am quite happy with it.
It is much better then the stock ROM.
Hi @SeeDoubleYous and guys. I was reading the Forum and decided to share with you my experience with this ROM. Well, I'm owner of a SM-T560 (in US and Canada this model is T560NU I don't know why it's different just in these two countries ). Anyway....
I made all the steps described on the step-by-step Instructions. (TWRP Recovery via ODIN, Root, ROM, GAPPS, etc etc etc).
I'll be honest with you. My t560 turned in a piece of sh... Very Slow, Apps Stucking all the time, sometimes bootlooping too... i used the Tab for almost 3 weeks. After that I decided to reset the device and I did all steps again using the same ROM (I reinstalled the TWRP RECOV via ODIN, proceeded a Factory + Internal Memory Wipe, Installed the LINEAGE 14.1 OS, etc, etc, etc) But this time I choose the "Micro" GAPPS option instead "PICO". Installed Root SU, etc, etc exactly as the directions wrote in the top page.
For my surprise, It's perfect Now!!!! ROM is great.... No problems of RAM, Bootlooping, Stucking, APP crashing... Absolutelly Nothing!
I don't know why, but it seems that the secret is install for first time and use for some weeks even its is not working fine. And After that, proceed All the step-by-step again from the very beggining. (Reinstall TWRP, ROM, GAPPS, Keys, "Boot Image" and ROOT SU). It will work fine on SM-T560 just from the second Install on.....
All Best guys
I need help. My screen is stuck on boot again
Am I bricked?
Hi guys, I've got a T560 tablet with the official ROM and I'm researching to upgrade it's software.
Currently I'm away off-shore for work but as soon as I get home I'll try this ROM.
I've been a fan of CyanogenMod since the early days and I'm eager to try it so I can bring some new life into my old tablet.
Since this ROM is for the SIM card variant T561 I was searching for a way to disable the Radio altogether and I found this:
https://android.stackexchange.com/q...le-radio-signal-in-a-phone-without-a-sim-card
Basically it disables the RIL with a simple Terminal Command:
Code:
su -c "setprop persist.radio.noril 1"
Can someone try this and see if its working properly? (OFC after a Back-up is done) Its persistent through reboots so you don't need to use Airplane Mode anymore and maybe it will help with the battery draining problem.
Also one question for the guys who are currently using this ROM:
Is Magisk working? After everything is set-up can we uninstall SuperSU and install Magisk for root?
Thank you,
Have a nice day!
SpawNyK said:
Code:
su -c "setprop persist.radio.noril 1"
Click to expand...
Click to collapse
I've tried the command and it worked, no reboots even if the airplane mode is off and no problem so far.
I don't know if the battery life is better now because I've just done it.
For the other question, I haven't tried because I like SuperSu, but I think there's no problem.
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
Can you please provide a guide for flashing this?
Like which GApps version should I use, etc...
I get in red, does something affect ROM? e: unknown command [log]
Hey,
does this rom works with SM-T562??? (3G)
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
gucio1976 said:
I found it here .
https://www.youtube.com/watch?v=-4h_3qDRiv8
Click to expand...
Click to collapse
Why should you use the old version, if this thread offers a newer one?
gucio1976 said:
---------- Post added at 11:33 ---------- Previous post was at 11:13 ----------
Something else. Maybe it will be useful to someone.
https://www.youtube.com/watch?v=7JpUomQs2ok
Click to expand...
Click to collapse
I think that's the same version as offered here...
shreejalm said:
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
Click to expand...
Click to collapse
I did not find any new version. The ones available are only working with the SM-T560NU....
Sorry!
Related
UPDATED 7/01/2014: added a link to surdu_petru's cyanogenmod
added MIUI 3.12.6 instead of 3.12.22, the last one caused some troubles
added new instrustions for a working TWRP
thread organized for a better and easier view
Click to expand...
Click to collapse
In This thread i will keep an eye on every forum that has a HAM section to find every ROM being developed for out device
How to get TWRP
1_ Use TWRP recovery from the ascend P6 forum "credits to surdu_petru"
If you found the instructions a bit confusing then do as follows
a- Download this zip containing some files we need, extract it and copy the 4 files within to the root of your sd card
b- Install Touch Recovery.apk, launch the app then hit "Install Recovery" this will ask for root permission, when it done, hit "Reboot into Recovery"
c- When in CWM recovery, select "install zip" and look for "Touch Recovery Loader.zip" in your exterbal sd card
d- Selct "install zip" again and this time look for "TWRP_01" and "TWRP_02" install them both one by one.
e- Select Reboot System, when the phone rebootsn first you get to see the HUAWEI ASCEND logo, then the LED light will turn GREEN so quickly keep pressing "volume+" or "vomule-" til the LED light turns RED
f- If you did everything right you should be now in TWRP
2_ In TWRP recovery, select "Install" then flash the zip file you want
Click to expand...
Click to collapse
How to Flash a stock ROM
1_ download the rom and unzip it
2_ put the dload folder in the root of your external sd card
3_ make sure the folder dload contains one file names "UPDATE.APP"
4_ backup system settings and other configurations to external sdcard using the backup app from huawei
5_ go to settings>about phone>system update>local update>confirm
Click to expand...
Click to collapse
STOCK ROMs (Android 4.1.X/Emotion UI)
B113
DOWNLOAD
Android 4.1
EMUI 1.5
Version Number: V100R001C00B113
Update Package Size: 1.08 GB
Click to expand...
Click to collapse
[/CENTER]
B221
DOWNLOAD
Android 4.1.2
Current General Release from Huawei for the International Market, with Gapps
Click to expand...
Click to collapse
Credits to Onecton
STOCK ROMs (Android 4.2.X/Emotion UI)
B905
DOWNLOAD
Android 4.2.2.
Currently the Beta Chinese Version, No Gapps included
For Navigationbar Options Edit this in Build.prop:
ro.config.hw_navigationbar =false -> true
ro.config.hw_shownavisettings =false -> true
GApps which work with this Rom -> LINK
CWM for flashing said GApps -> LINK[
Click to expand...
Click to collapse
Credits to Onecton
B906
Android 4.2.2
EMOTION UI 1.6
Latest stable chinese version (multilang)
Three themes only
Click to expand...
Click to collapse
DOWNLOAD
DOWNLOAD mirror
B907
Android 4.2.2
EMOTION UI 1.6
Russian version (should work perfectly in other countries)
Click to expand...
Click to collapse
DOWNLOAD
CUSTOM ROMs
[UNOFFICIAL][CyanogenMod 10.1 [06/01/2013]
Credits to THE ONE THAT MADE IT @surdu_petru
10.1 is based on Android 4.2
builded from the last updated CyanogenMod 10.1 source ;
based on Firmware B125 !
build safe to test only if you follow the steps to Installation !
Include the last update TWRP Recovery R02.1 !!!
Not Working :
camera ;
maybe some other small stuff :
audio a2dp ;
Wi-Fi hotspot ;
Click to expand...
Click to collapse
For a download link please visit surdu_petru's thread HERE
FLASH with TWRP recovery
MIUI ROMs
MIUI 3.12.6
Based on Android 4.2.2
When bugs found, please report them here
Click to expand...
Click to collapse
How to flash
1_ Use TWRP recovery from the ascend P6 forum "credits to surdu_petru"
If you found the instructions a bit confusing then do as follows
a- Download this zip containing some files we need, extract it and copy the 4 files within to the root of your sd card
b- Install Touch Recovery.apk, launch the app then hit "Install Recovery" this will ask for root permission, when it done, hit "Reboot into Recovery"
c- When in CWM recovery, select "install zip" and look for "Touch Recovery Loader.zip" in your exterbal sd card
d- Selct "install zip" again and this time look for "TWRP_01" and "TWRP_02" install them both one by one.
e- Select Reboot System, when the phone rebootsn first you get to see the HUAWEI ASCEND logo, then the LED light will turn GREEN so quickly keep pressing "volume+" or "vomule-" til the LED light turns RED
f- If you did everything right you should be now in TWRP
2_ In TWRP recovery, select Install then flash the zip file
Download link
MIUI 3.6.9
Based on Android 4.1.2 and Emotion UI B114
Click to expand...
Click to collapse
DOWNLOAD
How to Flash
1_ Download and unrar the ROM
2_ Enable "USB Debugging"
3_ Change usb connection to MTP
4_ Run the file "flash_all.bat " then tap just "enter"
5_ When you see that the flash is done, press and hold the "volume up" on the phone + any key on PC
6_ Phone will automatically restarts when you see the Huawei logo, release the phone "volume up" key
7_ Perform a factory reset
Thanks a lot
Really appropriate this compilation , looking forward to seeing 4.3 or 4.4 even custom rom.
Thanks
Can the international version of Huawei Ascend Mate( 1Gb ram ) use all the above roms.
Hi Hamdimo.
Firstly :thumbup::thumbup::thumbup::thumbup: for this forum..
Is there any custom P6 rom available for mate? In the other forum someone mention porting p6 rom in our ham? Thanks
[email protected]
Just Want To Know If Whatsapp Work Perfectly In MIUI?
There is android 4.4 costom rom for the mate?
Gesendet von meinem HUAWEI MT1-U06 mit Tapatalk
CM 10.2 on Ascend Mate?
Does anyone know how hard it would be to get CM 10.2 to run on the Ascend Mate? Just got the phone and really love it but can't stand all the bloat which really kills the batty. Love to have something lean and mean like CM running on my phone.
Thanks.
vastphoto said:
Does anyone know how hard it would be to get CM 10.2 to run on the Ascend Mate? Just got the phone and really love it but can't stand all the bloat which really kills the batty. Love to have something lean and mean like CM running on my phone.
Thanks.
Click to expand...
Click to collapse
CM 10.1 is the best we can hope for until huawei release a 4.3 or 4.4 rom for the mate and then we will still need a way to flash a custom recovery. Until then our options are very limited.
But the updates its to slow...
Gesendet von meinem HUAWEI MT1-U06 mit Tapatalk
MIUI 5 3.8.12 for Huawei Ascend Mate.
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
thegooz said:
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
Click to expand...
Click to collapse
Nice catch, i'll include this rom here as an update
thegooz said:
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
Click to expand...
Click to collapse
hi thegooz,
i hv downloaded it. just in case would you be kind to include how you flash it with a guide? thanks.
i read the guide but just in case someone would want to ask the same question over and over again, they'll have the flashing guide.
i havent install it yet, wanna try when i get back.
by the way, i revert back to B221, will it be compatible? i also had downloaded the Official B907 from the russian site but have not flash yet.
just want to know anyone experiences towards these.
I feel that i've made a mistake.
I try flashing the miui rom from thegooz link. Its stuck in bootloop/keep restarting when still reading files during the last system reading. That was in 60% batt.
Now keep restarting that way.
When i discionnect the charging cable it turn off and restarting again. Same as when i connect the cable again.
Any suggestion guys.
T28#HOX
theoppositeman said:
hi thegooz,
i hv downloaded it. just in case would you be kind to include how you flash it with a guide? thanks.
i read the guide but just in case someone would want to ask the same question over and over again, they'll have the flashing guide.
i havent install it yet, wanna try when i get back.
by the way, i revert back to B221, will it be compatible? i also had downloaded the Official B907 from the russian site but have not flash yet.
just want to know anyone experiences towards these.
Click to expand...
Click to collapse
I've used the B907 as well. It's just a dload onto the SDcard and install. That ROM seems to be the best one in my experience. However, I couldn't the hide/show nav buttons to work. I ended up using Ultimate Dynamic Navbar Lite by Pavel (googleplaystore) to get the effect.
I'll probably switch back to it soon. I like MIUI but, it isn't as smooth although it looks better; and some things don't work well, i.e., voice assistant is in Chinese, MIUI audio player doesn't work with APEX launcher....things like that.
This is how I installed it. You might have to unplug/replug the usb and start over if it doesn't read Daemon. just unplug phone, close bluish/green window and try again. It took me a couple of times.-
Unzip ROM to desktop.
Put your usb cable in your pc and your phone.
Check if it is in debug mode (I was connected as Huwaei suite option).
If it isn't in debug, then go to settings developer options put usb debugging on.
Open ROM folder on desktop and press shift and double click on flash_all (its a batch file)
A command line window will appear in blueish/green (it's in Chinese).
Just press 1 on your keyboard and press enter (rom)
Then press enter again.
The phone will shutdown and will immediately will reboot you will get the Huawei ascend logo en the files will transfer now wait the phone will boot into the new ROM and your done (give it a while and don't unplug until the window appears to be completed).
I've done before and was able to dload back to B907 off SD card.
I've a 1.5gb version phone.
Good luck.
I am now stuck in bootloop. Mistakrnly didnt realised the battery is low 4+%.
At first try it went to bootloop so i restart in recovery force update with dload in ext sd card. Until 'Checking Module SYSTEM' phone restart in the middle and keep restarting at huawei logo.
I think battery not enough. So now i need help if anyone knows how to deplete
The battery so can charge. No led light when connect to usb cable/ no signal of the mate charging.
T28#HOX
theoppositeman said:
I am now stuck in bootloop. Mistakrnly didnt realised the battery is low 4+%.
At first try it went to bootloop so i restart in recovery force update with dload in ext sd card. Until 'Checking Module SYSTEM' phone restart in the middle and keep restarting at huawei logo.
I think battery not enough. So now i need help if anyone knows how to deplete
The battery so can charge. No led light when connect to usb cable/ no signal of the mate charging.
T28#HOX
Click to expand...
Click to collapse
You will probably need to leave ur mate on charge for sometime before ur mate is able to return to its normal state.
Try also the force installation method to install the B907 ROM to revive ur unit.
(with or without the charger connected).
Hope this helps..
Sent from my HUAWEI MT1-U06 using xda app-developers app
syaah said:
You will probably need to leave ur mate on charge for sometime before ur mate is able to return to its normal state.
Try also the force installation method to install the B907 ROM to revive ur unit.
(with or without the charger connected).
Hope this helps..
Sent from my HUAWEI MT1-U06 using xda app-developers app
Click to expand...
Click to collapse
Agreed. Or try holding all three buttons (pwr/volume +/_-) and wping/ clearing data then any ROM from SDcard (dload)
Thanks gooz n syaah.
It seems when i connected to cable to charge its not charging but turn on and stuck on the huawei logo. Cant turn it off except if i disconnect the cable. Theres no led light when connect to cable too.
When i press both vol button it will start the sdcard update but stuck in the last 'Checking Module SYSTEM' and when its in middle loading it restarted either back to the sdcard update or stuck in the logo screen.
I did left the phone stuck on the logo for a night hoping it will deplete the batt but to no avail. Still the same situation.
T28#HOX
Hello !
As I can see , you are able to use TWRP Recovery !
Now you can test a beta CyanogenMod 10.1 , should be ok also on HAM !
Good luck !
surdu_petru said:
Hello !
As I can see , you are able to use TWRP Recovery !
Now you can test a beta CyanogenMod 10.1 , should be ok also on HAM !
Good luck !
Click to expand...
Click to collapse
Do you really think it's possible? do we have a device tree now?
i have your TWRP on my device and it works just PERFECT.
Q&A for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting Tab Pro 12.2 with last firm done!
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Don't needed. You can root the normal cf-auto-root with latest sock without problem.
After we pm chat last days about rollback to T900UEUAND4 as unique possibility for rooting, i decided to do a last try before that, and luckily works perfect:
-just did a factory reset to restore from B3 recovery i been trying to prev installed T900UEUANI1 stock, wipe caché with stock recovery, odined cf-auto-root and voilá, just rooted!
No need to do the old B3-rollback-prior-D4 method now. Just a normal auto-root with no hassling.
temp maybe?
chhaggerty said:
It sounds like you maybe having a "Sleep of Death" (SOD) issue. The T520 and P900 have had similar problems. I will out of town until Monday but I'll do some research and hope to have a solution soon.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
crpalmer said:
There is a deadlock in Samsung's code triggered by the CPU boost driver. Look in the t520 device repo for the commit that disables it (actually probably 2 commits because I removed some functionality that doesn't make sense for this processor).
Click to expand...
Click to collapse
Dauntless said:
Device: SM-T900
Android: 4.4.2 (Stock, unrooted)
Kernel: 3.4.39-2534013
When putting the tablet into sleep mode, it will automatically shut itself down. When I try to turn it back on, the tablet will only do so after I plugged in the charger. The battery itself is fully charged.
I've updated to the latest available firmware version that's available to me. I couldn't find any list of known issues, so I'm wondering if this is a common problem and if I should return my tablet?
Click to expand...
Click to collapse
Same here. It seems that the problem maybe is temperature: after some time charging it gets really hot and maybe can't awake from that and need rebooting.
I've disabled the magnet sensor vía 3rd app to off the close-lid functionality but don't improve the problem.
Here in summer the room gets to +30°c and the Tab ups to almost 65°c when it gets hot!
Maybe it just reach the temp threshold and self shutdown, or intend that not letting awake.
Perhaps CM11 build here charges battery too fast, with higher voltage than allowed and provoque overheating. I mean, i really feels that it's charging real fast..
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Posted update last night, check it out
Thanks, btw, i was able to use ODIN to get a good version of TWRP and the ROM installed smoothly. I have encountered a few small bugs but nothing to report that is new. I noticed the "sleep of death" I think you are referring to, deep sleep resulting in a manual reboot to wake up. I have noticed my bluetooth disconnects and reconnects every few minutes during deep sleep..not sure why. will report back. Thanks SO SO much for the development, i love it, so sick of the green and blue and the settings tabs on this stock OS disgust me. I am curious tho, am I the only one who noticed significant slowdown and lag compared to stock? I do not put a lot of stock in benchmarks (skewed toward uncle sammy) but they also showed big slowdown....just my very humble and grateful early experiences. Thanks again.
total reflashing needed?
chhaggerty said:
Posted update last night, check it out
Click to expand...
Click to collapse
Well thanks, but,i don't see a flashing update but an entire 221MBs rom to flash..
Can you post just the little update file , if there's any, to flash above the installed rom?
I don't want to install rom, apps and config all over again.
Thanks!
-----
lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
-----
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Reboot from Android with 'reboot to recovery' option and when the TWRP splash logo shows it enter in a bootloop always to this instance that TWRP logo appears.
Then i just installed the good old UAND4 rom and it works fine.
Maybe i shouldn't go to recovery direct from android to prevent bootloop happen and try to go the normal way from boot.
Don't know, maybe I'll try some day.., or maybe better wait to Android L comes to us.
Please advice all that stuff in the respective threads, i can't.., cause' these 'noobs-wait-to-10-posting-before' rules..
Greetings.
bertoxo said:
1. Can you post just the little update file , if there's any, to flash above the installed rom?
2. Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
3. Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Click to expand...
Click to collapse
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.
arcadia2uk said:
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.
Click to expand...
Click to collapse
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.
bertoxo said:
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.
Click to expand...
Click to collapse
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option
arcadia2uk said:
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option
Click to expand...
Click to collapse
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!
bertoxo said:
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!
Click to expand...
Click to collapse
HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...
HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...
Click to expand...
Click to collapse
Thanks!
Installed boot.img and works flawlessly. Now i can back using lid cover again and no more hangs.
I hope they can solve the auto-rotate thing next time.
flashing screen, powering down...
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
My guess is that gaming need more power, why I would stop greeify and reset the governor to interactive while gaming. But other than that I have no ideas, as I haven't heard of this problem before.
This ROM is fantastic! Smooth, fast, responsive and just as described...big thanks.
spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
I don't know if you noticed, but chhaggerty just released a version 3, maybe this will work as there has been some work on the governors.
chhaggerty said:
New update see OP
Click to expand...
Click to collapse
Can i use the 4.4.4 GAPPS instead of 4.4.3 you are posting?
arcadia2uk said:
Thanks for another quality update, notably when reading how other cm11 exynos versions always seems to break something. With your T-900 cm11, I have never had any issues. The latest version is still running smooth, the changes in the CPU governor will probably allow for better battery life with the added conservative setting. However, I don't know what trade-off this will have on performance.
Click to expand...
Click to collapse
Maybe they start to use the big.LITTLE behavior of the Exynos, instead of ever using just the full power a15 cluster (battery eater).
I've haven't tried it but since it's a 4.4.4 rom they should work fine.
Error flashing ROM
Hi guys,
I get this error message when I try to flash CM11:
"Can't install this package on top of incompatible data. Please try another package or run a factory reset"
This is a brand new rooted SMT-900 Tab Pro 12.2". Here's some notes:
- I received the error using V1, V2, and V3, all receive the error message
- I downloaded two copies of v3 from two separate mirrors (CA and AZ), both receive the error message
- I did a factory reset and still received the error message
- Wiped davlik/cache/system partitions
- Tried on TWRP 2.7 and 2.8, both receive same error message
- All I have done to this tablet is root it, install TWRP, and create one backup
Any thoughts? I can try using CWM if someone can give me a quick overview of how to install it and remove TWRP (or keep TWRP).
*I TAKE NO CREDIT FOR ANY OF THIS, IM JUST TELLING HOW I DID IT. I AM ALSO NOT GUARANTEING YOU WILL HAVE THE SAME OUTCOME*
*I recommend going to this new update guide by CVertigo1 in the ROM's section as this version of the PlayStore ROM is outdated.*
Credit for Root and PlayStore Rom goes to jrkruse (https://forum.xda-developers.com/member.php?u=1949695)
ROOTING
1)Flashed stock Nougat ROM
2)Flashed ENG-ROOT found here https://www.androidfilehost.com/?fid=457095661767141717
- Make sure to flash the correct kernel included in the zip file
3) Install SuperSU. Link: https://www.androidfilehost.com/?fid=529152257862710010
- I used the regular Root.bat not the one with tweaks
FIXING LAG
1)Install Flashfire from PlayStore
2)Download the PlayStore Rom from https://www.androidfilehost.com/?fid=457095661767144652
-Transfer the file to the S7
3)Open Flashfire and flash the zip choosing only Mount/ system read/write
4)Now AROMA Installer will pop up and go through all of the terms and conditions
-When asked what to wipe I choose to wipe everything
-Next when asked what bloat to remove I choose the PlayStore Rom which removes all bloat and replaces stock apps with google apps (To see full list of changes refer to the PlayStore thread)
5)Now when my S7 boot it showed no launcher, I simply held the home button down which opened the google search, in there I searched for the playstore app and installed Nova Launcher.
-Now reinstall SuperSU by double clicking the root.bat like before
6) Installed the following apps to help with lag; Lspeed, Greenify, Kernal Auditor, LeanDroid, Force Doze, and SSD Boost
-I used most of the settings found on Lag fix threads for the MM root
My S7 is smooth as butter after all of this, no lag spikes and random crashes like I was experiencing with just the ENG Root flashed.
EXTRA
1)I did have to to a reboot to get the camera to work properly
2) I had to download a Dialer/Contacts and Message app from the playstore because the stock ones were deleted in this process. But the store ones work just fine, I am recieving calls and messages like normal.
3) *Battery life is just a little worse than stock, might be worth waiting for Xposed to released for Nougat.*
Credit for Root and PlayStore Rom goes to jrkruse (https://forum.xda-developers.com/member.php?u=1949695) :good:
setup wizard keeps stopping...
I have followed your step with my phone (Galaxy S7 Verizon - Android 7), but when go to step no 5 my phone always alert (The process com.android.phone has stopped, Setup Wizard keep stopping...). I tried to hold HOME button but still nothing and message always alert even reboot phone.
Please help. thank in advance
Bunrin said:
I have followed your step with my phone (Galaxy S7 Verizon - Android 7), but when go to step no 5 my phone always alert (The process com.android.phone has stopped, Setup Wizard keep stopping...). I tried to hold HOME button but still nothing and message always alert even reboot phone.
Please help. thank in advance
Click to expand...
Click to collapse
Weird, did you wipe your S7 completely before doing the process? I would flash fresh nougat and try again.
UPDATE
Went through the entire process once more and found that wiping but keeping SU image works the best, I chose "no wipe" but it caused random reboots. I then wiped my phone and did as stated in my original post and it is working smooth once again.
ikoyhn said:
Weird, did you wipe your S7 completely before doing the process? I would flash fresh nougat and try again.
Click to expand...
Click to collapse
My S7 model (SM-G930V). it's not compatible with VZW_TMO_HYBRID_PLAYSTORE_BS_FREE_STOCK_V6.zip? while installing show DEVICE: Samsung Galaxy S7 G935V
Bunrin said:
My S7 model (SM-G930V). it's not compatible with VZW_TMO_HYBRID_PLAYSTORE_BS_FREE_STOCK_V6.zip? while installing show DEVICE: Samsung Galaxy S7 G935V
Click to expand...
Click to collapse
The rom is for Verizon and T mobile devices. Your good to go.
Blade22222 said:
The rom is for Verizon and T mobile devices. Your good to go.
Click to expand...
Click to collapse
Bunrin said:
My S7 model (SM-G930V). it's not compatible with VZW_TMO_HYBRID_PLAYSTORE_BS_FREE_STOCK_V6.zip? while installing show DEVICE: Samsung Galaxy S7 G935V
Click to expand...
Click to collapse
Yup it says G935 but it also works with the G930.
ikoyhn said:
Yup it says G935 but it also works with the G930.
Click to expand...
Click to collapse
When install finish after reboot my phone show "Setup Failed....". any ideas. thanks
Bunrin said:
When install finish after reboot my phone show "Setup Failed....". any ideas. thanks
Click to expand...
Click to collapse
Did you start on a factory fresh Nougat? It must be trying to run the setup that you first have to do when you get/wipe your phone. But you should have already done this prior IF you wiped your phone completely and started from there.
Here is another guide that you might find helpful: https://forum.xda-developers.com/verizon-galaxy-s7/development/rom-t3576124
ikoyhn said:
Did you start on a factory fresh Nougat? It must be trying to run the setup that you first have to do when you get/wipe your phone. But you should have already done this prior IF you wiped your phone completely and started from there.
Here is another guide that you might find helpful: https://forum.xda-developers.com/verizon-galaxy-s7/development/rom-t3576124
Click to expand...
Click to collapse
Thanks for your support.
Is this for the Qualcomm processor?
Gon Rouge said:
Is this for the Qualcomm processor?
Click to expand...
Click to collapse
Yes the *US*S7 does have the Qualcomm processor, and this ROM does work with it. If you are looking to see if it will work for another device with the processor then I recommend looking here: https://forum.xda-developers.com/member.php?u=1949695, for more information on the ROM and compatibility.
ikoyhn said:
Yes the S7 does have the Qualcomm processor, and this ROM does work with it. If you are looking to see if it will work for another device with the processor then I recommend looking here: https://forum.xda-developers.com/member.php?u=1949695, for more information on the ROM and compatibility.
Click to expand...
Click to collapse
Not all s7s are Qualcomm, we sometimes get international users in here.
Blade22222 said:
Not all s7s are Qualcomm, we sometimes get international users in here.
Click to expand...
Click to collapse
Whoops forgot about that, I fixed my reply. Thanks for pointing it out:good:
My phone is now stuck on the boot text (Samsung Galaxy S7) have yet to see past it.
IDCM said:
My phone is now stuck on the boot text (Samsung Galaxy S7) have yet to see past it.
Click to expand...
Click to collapse
-After what step did it get stuck on the boot text?
-Did you start factory fresh?
ikoyhn said:
-After what step did it get stuck on the boot text?
-Did you start factory fresh?
Click to expand...
Click to collapse
I've got it all in working order, but to address the issue.
It was just straight after using the first Odin file. (Flashed ENG-ROOT)
Although with hours of sitting here and determination, I came to a solution using this post and many others.
I now have my S7 (Verizon) rooted and functioning with no issues.
Thank you for sharing. :highfive: :good:
IDCM said:
I've got it all in working order, but to address the issue.
It was just straight after using the first Odin file. (Flashed ENG-ROOT)
Although with hours of sitting here and determination, I came to a solution using this post and many others.
I now have my S7 (Verizon) rooted and functioning with no issues.
Thank you for sharing. :highfive: :good:
Click to expand...
Click to collapse
Glad you got it all sorted out:good:
I haven't rooted a phone in a few years but I feel like I missed a fundamental step of the root process so I have a stupid question: I get to the rom flashing step and my phone can't reboot because "Custom binary locked by SECURE BOOT (boot.img)." Then I reflash the ENG-ROOT boot.img and that same secure boot blocks because of the custom modem binary. So I just reflashed stock to get it working again, but it still gives that message if I try to install something like magisk. Am I missing something?
fjgrf said:
I haven't rooted a phone in a few years but I feel like I missed a fundamental step of the root process so I have a stupid question: I get to the rom flashing step and my phone can't reboot because "Custom binary locked by SECURE BOOT (boot.img)." Then I reflash the ENG-ROOT boot.img and that same secure boot blocks because of the custom modem binary. So I just reflashed stock to get it working again, but it still gives that message if I try to install something like magisk. Am I missing something?
Click to expand...
Click to collapse
You cannot use any custom kernels on us snapdragon models. No magisk or anything. The only root option is engboot and root.bat plus the setups to smooth it out or no root at all
This is my first ever ROM to post up. I just recently started building them. This is a stock deodexed Nougat ROM that is pre rooted. It is 100% AT&T Nougat with just a few fixes. I have left all Samsung and AT&T bloat for those that want all the bloat but like to be rooted and deodexed.
Follow the steps below for installation:
Step 1: You must already be on Nougat firmware. There are various threads on how to do this but if you can not figure it out just ask and i will try to assist you the best i can.
Step 2: Once on Nougat, root your device. Follow this guide https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
Step 3: Once Rooted, install Flash fire from playstore.
Step 4: Open Flashfire and grant SuperSU access, once you are at the main menu, press the + and select Flash ZIP or OTA, go to the place you stored the ROM and selecet it. On the next screen MAKE SURE "Mount /system read/write" is selected and click the check mark in the upper right hand corner.
Step 5: Click the + sign again and select "Wipe", leave the defaulted boxes checked (System data, 3rd party apps, and Dalvik cache) and click the check mark in the upper right corner again. ( optional, you can select internal storage but you don't have to).
Step 6: VERY VERY IMPORTANT, select and hold down on Wipe and move it above "Flash ZIP or OTA"
Step 7: Make sure EverRoot is disabled and Reboot is set to normal.
Step 8: Click the lightning bolt and then yes on the next prompt, and let FF do it's thing.
*****Be patient, it will take up to 15 min to boot but most times it is quicker than that.*****
* Fixes i added
Fingerprint fix after root. Thanks to @qwewqa
Replaced IMSService.apk to remove hurricane icon.
CPU Fixes. Thanks to @stang5litre
Issues:
Phone forgetting Bluetooth devices after reboot, I am trying to find a fix for it and will update when i do.
Thanks @stang5litre for countless hours and days of walking me through so many steps from setting up my kitchen to fixing my phone via TV and ADB.
Thanks @SuperR. for the kitchen and all the continued support
Thanks @Chainfire for Flashfire and SuperSU
Download link: https://www.dropbox.com/s/17w8ut192jwixnw/G930AUCS4BQE1.zip?dl=0
Where did you get the ATT stock firmware?
Edit: nevermind I thought you had the latest firmware sorry. Good luck on your first rom
jrkruse said:
Where did you get the ATT stock firmware?
Edit: nevermind I thought you had the latest firmware sorry. Good luck on your first rom
Click to expand...
Click to collapse
Thanks bud. I've been looking for the latest but can't find it. I tried to pull it from my phone using superR kitchen but couldn't deodex it correctly. So inn still working on it. Lol
Congrats bud!!!
Cool. Does adoptable storage work with this ROM?
yuejon said:
Cool. Does adoptable storage work with this ROM?
Click to expand...
Click to collapse
This is 100% stock rooted, deodex, if it didn't work on stock unrooted, chances are that it don't work on this one either.
Hello, I've flashed the rom and loving it so far, it is buttery smooth and seems to have the same battery drain as in stock, but two problems... Every reboot or when I just turn off the wifi, it forgets the password. I've tried build prop editor and set ro.securestorage.suppprt to false, but no success. Another problem, Blutooth won't turn on. It used to before I changed the build prop, but now, it just doesn't turn on. I'm not sure if it is a problem with nougat root or your rom itself, I would love some answers. Otherwise the rom is great and I hope you continue to update it as there isn't a lot of development in AT&T.
OfferedBison said:
Hello, I've flashed the rom and loving it so far, it is buttery smooth and seems to have the same battery drain as in stock, but two problems... Every reboot or when I just turn off the wifi, it forgets the password. I've tried build prop editor and set ro.securestorage.suppprt to false, but no success. Another problem, Blutooth won't turn on. It used to before I changed the build prop, but now, it just doesn't turn on. I'm not sure if it is a problem with nougat root or your rom itself, I would love some answers. Otherwise the rom is great and I hope you continue to update it as there isn't a lot of development in AT&T.
Click to expand...
Click to collapse
Thank you for your feedback. I have experienced the Bluetooth issue on another more custom rom that I'm building, i haven't pin pointed it yet but am still working on it. I was originally thinking it had something to do with something that i removed from the rom (bloat) because when i run this rom with all the bloat i didn't have the issue. I will switch back to this rom and run it for a few days and see if the issue pops back up. As for the WiFi password, i have no problem with that and i have mine set to "true". I'll look into it though and get back with you.
For the battery drain, install kernel auditor, settings menu in top left corner, go to cpu, and set the governor to "on Demand" that will help a little bit.
dirtydodge said:
Thank you for your feedback. I have experienced the Bluetooth issue on another more custom rom that I'm building, i haven't pin pointed it yet but am still working on it. I was originally thinking it had something to do with something that i removed from the rom (bloat) because when i run this rom with all the bloat i didn't have the issue. I will switch back to this rom and run it for a few days and see if the issue pops back up. As for the WiFi password, i have no problem with that and i have mine set to "true". I'll look into it though and get back with you.
For the battery drain, install kernel auditor, settings menu in top left corner, go to cpu, and set the governor to "on Demand" that will help a little bit.
Click to expand...
Click to collapse
Thank you. The Bluetooth problem was fixed when I reverted the changes I made in build prop, and for the wifi problem I think it was something I froze in titanium backup, since I froze some bloat etc.
OfferedBison said:
Thank you. The Bluetooth problem was fixed when I reverted the changes I made in build prop, and for the wifi problem I think it was something I froze in titanium backup, since I froze some bloat etc.
Click to expand...
Click to collapse
The changes you made in build.prob? You mean by setting the secure.storage to false? I do know that on the custom Rom I'm building, i had it set to false and i was having the blue tooth issue, for the WiFi issue, it could be something you froze, can you SS your frozen list.
dirtydodge said:
The changes you made in build.prob? You mean by setting the secure.storage to false? I do know that on the custom Rom I'm building, i had it set to false and i was having the blue tooth issue, for the WiFi issue, it could be something you froze, can you SS your frozen list.
Click to expand...
Click to collapse
Here,
OfferedBison said:
Here,
Click to expand...
Click to collapse
Thanks, the only two things that I'm not sure what it is, is UPSM_N and com.android.Samsung. M. I'm not saying that could be causing it but I'll habe to research what those two things are. Thank you.
dirtydodge said:
Thanks, the only two things that I'm not sure what it is, is UPSM_N and com.android.Samsung. M. I'm not saying that could be causing it but I'll habe to research what those two things are. Thank you.
Click to expand...
Click to collapse
I defrosted android.samsung, but cannot defrost upsm.n, weird. This doesn't seem to be the problem as it still persists.
OfferedBison said:
I defrosted android.samsung, but cannot defrost upsm.n, weird. This doesn't seem to be the problem as it still persists.
Click to expand...
Click to collapse
So your still having the WiFi problem not remembering password after reboot? My ro.secure is set to true and I'm not having the issue.
dirtydodge said:
So your still having the WiFi problem not remembering password after reboot? My ro.secure is set to true and I'm not having the issue.
Click to expand...
Click to collapse
Unfortunately, yes. Maybe something went wrong when I flashed the rom... I'll try reflashing the rom later , when I have time.
OfferedBison said:
Unfortunately, yes. Maybe something went wrong when I flashed the rom... I'll try reflashing the rom later , when I have time.
Click to expand...
Click to collapse
ok. Yea i would try that. I can't duplicate the issue on my end. Leave the ro.secure storage set to true and see if that fixed it. That's what mine is set at and I'm not having any problems with Bluetooth or passwords at this moment.
dirtydodge said:
ok. Yea i would try that. I can't duplicate the issue on my end. Leave the ro.secure storage set to true and see if that fixed it. That's what mine is set at and I'm not having any problems with Bluetooth or passwords at this moment.
Click to expand...
Click to collapse
I have reflashed the rom and also added a dual speaker mod. Everything is working like a charm. Bluetooth and Wifi are all working.
Flashed this and it works fine, but I also experience WiFi 'losing' passwords.
I just flashed it again and no change. In fact, from the time I enter the WiFi password during setup until setup is done, I have to re-enter WiFi password because it 'forgets' (it reports authentication error later after having worked fine initially)
Any other ways to fix this so I don't have to keep re-entering passwords like this?
JJHiemenz said:
Flashed this and it works fine, but I also experience WiFi 'losing' passwords.
I just flashed it again and no change. In fact, from the time I enter the WiFi password during setup until setup is done, I have to re-enter WiFi password because it 'forgets' (it reports authentication error later after having worked fine initially)
Any other ways to fix this so I don't have to keep re-entering passwords like this?
Click to expand...
Click to collapse
Use root explorer, go to system/build.prop and make sure ro.secure.storage is set to "true" as shown in the attachment. I live around Houston TX so we're prepping for the hurricane at the moment so I might be oit for a few days but I'll try to check back on here as soon as I can. Another issue that has been brought up is the phone forgetting Bluetooth device after a reboot. At this moment there is no fix for it that i can find. As soon as I can find a fix for this i will upload a new version.
same g930a-v models-same problem.pls wanted phone emergency backup file (g930a-v same
same g930a-v models-same problem.pls wanted phone emergency backup file (g930a-v same).help me pls all user phone no down mode.
http://forum.gsmhosting.com/vbb/f10...0a-sbl-error-upload-mode-pls-help-me-2301220/
dirtydodge said:
This is my first ever ROM to post up. I just recently started building them. This is a stock deodexed Nougat ROM that is pre rooted. It is 100% AT&T Nougat with just a few fixes. I have left all Samsung and AT&T bloat for those that want all the bloat but like to be rooted and deodexed.
Follow the steps below for installation:
Step 1: You must already be on Nougat firmware. There are various threads on how to do this but if you can not figure it out just ask and i will try to assist you the best i can.
Step 2: Once on Nougat, root your device. Follow this guide https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
Step 3: Once Rooted, install Flash fire from playstore.
Step 4: Open Flashfire and grant SuperSU access, once you are at the main menu, press the + and select Flash ZIP or OTA, go to the place you stored the ROM and selecet it. On the next screen MAKE SURE "Mount /system read/write" is selected and click the check mark in the upper right hand corner.
Step 5: Click the + sign again and select "Wipe", leave the defaulted boxes checked (System data, 3rd party apps, and Dalvik cache) and click the check mark in the upper right corner again. ( optional, you can select internal storage but you don't have to).
Step 6: VERY VERY IMPORTANT, select and hold down on Wipe and move it above "Flash ZIP or OTA"
Step 7: Make sure EverRoot is disabled and Reboot is set to normal.
Step 8: Click the lightning bolt and then yes on the next prompt, and let FF do it's thing.
*****Be patient, it will take up to 15 min to boot but most times it is quicker than that.*****
* Fixes i added
Fingerprint fix after root. Thanks to @qwewqa
Replaced IMSService.apk to remove hurricane icon.
CPU Fixes. Thanks to @stang5litre
Issues:
Phone forgetting Bluetooth devices after reboot, I am trying to find a fix for it and will update when i do.
Thanks @stang5litre for countless hours and days of walking me through so many steps from setting up my kitchen to fixing my phone via TV and ADB.
Thanks @SuperR. for the kitchen and all the continued support
Thanks @Chainfire for Flashfire and SuperSU
Download link: https://www.dropbox.com/s/17w8ut192jwixnw/G930AUCS4BQE1.zip?dl=0
Click to expand...
Click to collapse
Phone - Moto Z play XT1635-02-DS
Android- 7.1.2
Installed TWRP 3.1.1.0
Viper addison 7.1.2
Here are my problem:
1. Flashed with supersu v2.79 and also v2.82, neither works. Phone still not rooted. When i tried toa access supersu app, it says "there is no su binary installed and supersu can't install it..."
2. Camera does open but it doesn't function, it stays dark. (I have custom gapps 7.1.x)
3. Proximity sensor does not seem to be working in other cases, but the phone goes dark as soon as i press dial or as soon as i pick a call and remains so untill the other party cuts the call. Otherwise i need to shut down the phone if i have to end the call from my phone.
4. When i shut down the phone, in order to reboot manually from recovery-reboot-bootloader. Otherwise it remains in twrp recovery.
Can anyone help please?
Have you tried flashing back to stock and seeing if that fixed these issues?
Pal Guite said:
Phone - Moto Z play XT1635-02-DS
Android- 7.1.2
Installed TWRP 3.1.1.0
Viper addison 7.1.2
Here are my problem:
1. Flashed with supersu v2.79 and also v2.82, neither works. Phone still not rooted. When i tried toa access supersu app, it says "there is no su binary installed and supersu can't install it..."
2. Camera does open but it doesn't function, it stays dark. (I have custom gapps 7.1.x)
3. Proximity sensor does not seem to be working in other cases, but the phone goes dark as soon as i press dial or as soon as i pick a call and remains so untill the other party cuts the call. Otherwise i need to shut down the phone if i have to end the call from my phone.
4. When i shut down the phone, in order to reboot manually from recovery-reboot-bootloader. Otherwise it remains in twrp recovery.
Can anyone help please?
Click to expand...
Click to collapse
This is not really a problem with the phone per se but the rom you chose to flash. The reboot issue can be checked by setting a command at bootloader using "fastboot oem fb_mode_clear".
gman88667733 said:
Have you tried flashing back to stock and seeing if that fixed these issues?
Click to expand...
Click to collapse
Thanks. But i don't have the stock rom. I didn't intend to use a custom rom. I tried to root it to recover some deleted photos and the moron that i am, i didn't back up the stock firmwares and while tweaking around in the recovery i somehow deleted the stock rom. This is my 1st time...
DroneDoom said:
This is not really a problem with the phone per se but the rom you chose to flash. The reboot issue can be checked by setting a command at bootloader using "fastboot oem fb_mode_clear".
Click to expand...
Click to collapse
Thanks... I tried the above command (it does recognize my device) bur this is what i get :
{bootloader} slot-count: not found
{bootloader} slot-suffixes: not found.
Pal Guite said:
Thanks... I tried the above command (it does recognize my device) bur this is what i get :
{bootloader} slot-count: not found
{bootloader} slot-suffixes: not found.
Click to expand...
Click to collapse
Is there an option for the bootloader in developer settings in your rom similar to the screenshot I attached? Make sure it's enabled.
DroneDoom said:
Is there an option for the bootloader in developer settings in your rom similar to the screenshot I attached? Make sure it's enabled.
Click to expand...
Click to collapse
Thanks for your concern. Developer option is 'on' and Multiprocess webView renderers seperately - 'on'. But i get the same problem. (and how do you attach screenshots ? I don't see any option for attaching files) In anycase, like you said, i think the problem has more to do with the rom. Can you please suggest me another rom or if possible link from where i can download stock rom for my phone.
Pal Guite said:
Thanks for your concern. Developer option is 'on' and Multiprocess webView renderers seperately - 'on'. But i get the same problem. (and how do you attach screenshots ? I don't see any option for attaching files) In anycase, like you said, i think the problem has more to do with the rom. Can you please suggest me another rom or if possible link from where i can download stock rom for my phone.
Click to expand...
Click to collapse
If your on xda with your browser, it's the paperclip icon to attach files. If you are using a 3rd party app that wraps xda into it then I can't help you there. As for going back to stock, Motorola made things a little critical when they released Nougat. Depending on how far you were on keeping the device up to date through stock, flashing the available stock images (which aren't signed) could brick the device if you aren't careful. There use to be an account on androidfilehost that uploaded current stock packages but it seems they're all gone now. If you remember the build number of the device before you rooted, that will help in picking the right stock files. I've taken a break in keeping my device rooted so I haven't kept track of the resources used to help go back to stock but they're in the MZP guide threads.
EDIT: a word of caution when reverting to stock:
-Don't use flash tools that don't let you see/edit the fastboot commands
-Do not use commands that touch modem/radio or gpt partitions
Found an upload of the latest build release keep it around when you figure out what you need to flash. It's best to clear system, data, and cache before flashing. Also have a rom (and twrp) at hand to adb sideload in case stock doesn't boot.
https://androidfilehost.com/?a=show&w=files&flid=215703
This Android version 7.1.1
Security patch: Sept 2017
Build number: NPN26.118-22-2
Thanks alot... ?