Related
Hi, simple MOD to change the boot image of your tab.
HOWTO:
1- put your device in download mode;
2- flash with odin the attached file (PDA filed);
3- copy in the /mnt/.lfs/ folder your new image called logo.jpg
4- reboot and enjoy it!
IMPORTANT:
1- rename the image before the copy cause after you cannot mod it;
2- the image must have the same res of your tab;
3- images too big might don't work.
4- If something go wrong just reflash the .tar and follow again the steps above.
Thanks to ffgf that tested it.
Skin1980 said:
Hi, simple MOD to change the boot image of your tab.
HOWTO:
1- put your device in download mode;
2- flash with odin the attached file (PDA filed);
3- copy in the /mnt/.lfs/ folder your new image called logo.jpg
4- reboot and enjoy it!
IMPORTANT:
1- rename the image before the copy cause after you cannot mod it;
2- the image must have the same res of your tab;
3- images too big might don't work.
4- If something go wrong just reflash the .tar and follow again the steps above.
Thanks to ffgf that tested it.
Click to expand...
Click to collapse
Gonna try this one later. Thx man
Interesting...I never spotted this before. I still have my old 1010, I'll have to try this out! :good:
Xolo Q1000 Stock Nanodroid Backup, Rooting and Flushing CWM Method. (Tested on my own Phone)with Xolo Q1000 Stock Nandroid Backup
Read everything or risk a brick standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. (Well this method will definitely work). Don’t do it if you don’t know what is rooting and CWM.
1. Go to Settings > About Phone.
2. Next, scroll all the way down and tap on About Phone, and you will notice a segment detailing your device’s build number (XOLO
_Q1000_S105_130411).
3. Repeatedly tap on Build Number (seven taps should do the trick) until you’re met with a message that reads: “you are now a developer!”
4. Developer Options will now be available in within the Settings app.
5. Go to settings > developer options > enable USB debugging.
6. Download AND Install MTK Drivers h t t p : / / w w w . m e d I a f I r e . c o m /download/nv96xclhjmaiclu/Mobistel_Cynus_T1_Drivers_x86.exeDownload Here)
7. Reboot your PC.
8. Download and extract the MTK6589 Auto Root folder from the .rar download. H t t p : / / w w w . s e n d s p a c e . c o m /file/v9np38 Download Here)
9. Connect your phone to PC visa USB.
10. Run run.bat from the extracted MTK6589 Auto Root folder.
11. Press any key and wait while it roots your phone
12. After finished, now reboot
13. Now you’re rooted. Verify root with a ‘Root Checker’ app from Play, or run any app you know requires root and you should see a root permissions request.
14. Reboot your phone.
15. Now download Recovery Image and put it in to sd card. H t t p s : / / w w w . b o x . c o m/s/ymebwi7p7s6aegy0cunx Download Here)
16. Download Mobile uncle from play store.
17. Open Mobile uncle and Grand root access to it.
18. There is an option to flush recovery. Select it.
19. It will search the recovery image that is in sd card. Also if you are online then it will show more recovery from internet. I never tried that but they should also work but probably in Chinese language.
20. Select recovery it will ask for permission. Hit ok.
21. It will reboot your phone. Now CWM has been flushed.
22. Now you can do any CWM operations including flushing Touch wiz launcher and xperia keyboard as I already did.
Download: Stock Nandroid Backup for Xolo Q1000 (Untoched) from h t t p : / / d - h . s t / W k T
sizariya said:
Xolo Q1000 Rooting and Flushing CWM Method. (Tested on my own Phone)
Read everything or risk a brick standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. (Well this method will definitely work). Don’t do it if you don’t know what is rooting and CWM.
1. Go to Settings > About Phone.
2. Next, scroll all the way down and tap on About Phone, and you will notice a segment detailing your device’s build number (XOLO
_Q1000_S105_130411).
3. Repeatedly tap on Build Number (seven taps should do the trick) until you’re met with a message that reads: “you are now a developer!”
4. Developer Options will now be available in within the Settings app.
5. Go to settings > developer options > enable USB debugging.
6. Download AND Install MTK Drivers h t t p : / / w w w . m e d I a f I r e . c o m /download/nv96xclhjmaiclu/Mobistel_Cynus_T1_Drivers_x86.exeDownload Here)
7. Reboot your PC.
8. Download and extract the MTK6589 Auto Root folder from the .rar download. H t t p : / / w w w . s e n d s p a c e . c o m /file/v9np38 Download Here)
9. Connect your phone to PC visa USB.
10. Run run.bat from the extracted MTK6589 Auto Root folder.
11. Press any key and wait while it roots your phone
12. After finished, now reboot
13. Now you’re rooted. Verify root with a ‘Root Checker’ app from Play, or run any app you know requires root and you should see a root permissions request.
14. Reboot your phone.
15. Now download Recovery Image and put it in to sd card. H t t p s : / / w w w . b o x . c o m/s/ymebwi7p7s6aegy0cunx Download Here)
16. Download Mobile uncle from play store.
17. Open Mobile uncle and Grand root access to it.
18. There is an option to flush recovery. Select it.
19. It will search the recovery image that is in sd card. Also if you are online then it will show more recovery from internet. I never tried that but they should also work but probably in Chinese language.
20. Select recovery it will ask for permission. Hit ok.
21. It will reboot your phone. Now CWM has been flushed.
22. Now you can do any CWM operations including flushing Touch wiz launcher and xperia keyboard as I already did.
23. If you want to flush stock recovery back then same method can be applied. H t t p : / / d – h . s t /N8n Download Here)
Click to expand...
Click to collapse
good show chap! but i would recommend renaming it so it would be easier for newbies to find this. requesting it should be moved also.
what it should be?
Rename what? Please explain sir
I've rooted my XOLO Q1000 already.
Forgot to make a backup :| but hey! Thanks for the stock ROM!
Thanks button pressed.
Sent from my Q1000 using xda app-developers app
How do i flash the nandroid backup which i took from the internet
I might sound like a total noob.. that is because iam still in 9th grade..
guys.. could anyone help me to get to the stock rom of xolo q1000
i installed the nandroid backup that was given above..but when i go into recovery, and flash the nanadroid zip the instalation is aborted all the fricking time..:crying:
please help me..iam in need of help..
P.S iam new to xda..
Good start Dude..
BhavyaBirla said:
I might sound like a total noob.. that is because iam still in 9th grade..
guys.. could anyone help me to get to the stock rom of xolo q1000
i installed the nandroid backup that was given above..but when i go into recovery, and flash the nanadroid zip the instalation is aborted all the fricking time..:crying:
please help me..iam in need of help..
P.S iam new to xda..
Click to expand...
Click to collapse
Actually you have to unzip the nandroid backup given by me. Then place it in your SD card. Don't change the structure of directory. then go to CWM recovery. then backup and restore then restore the backup. Done. If any problem then pleas PM me or call me (Zero Nine Four Two Five Four Five One One Eight Six Or Zero Seven Three Eight Nine Nine Two Six Zero One Eight) any time dude. We will learn many things new also.
ROM please?
sizariya said:
Actually you have to unzip the nandroid backup given by me. Then place it in your SD card. Don't change the structure of directory. then go to CWM recovery. then backup and restore then restore the backup. Done. If any problem then pleas PM me or call me (Zero Nine Four Two Five Four Five One One Eight Six Or Zero Seven Three Eight Nine Nine Two Six Zero One Eight) any time dude. We will learn many things new also.
Click to expand...
Click to collapse
Thanks man.. hey.. could you please help me find a good rom for my phone? i didnt like the miui or the lewa os.. is there any other rom like cm or anything good enough..P.S also could u help me get the z1 walkman app on my phone..that would be great man..Thanks in advance!!:laugh:
Unable to find the nandroid backup!!
sizariya said:
Actually you have to unzip the nandroid backup given by me. Then place it in your SD card. Don't change the structure of directory. then go to CWM recovery. then backup and restore then restore the backup. Done. If any problem then pleas PM me or call me (Zero Nine Four Two Five Four Five One One Eight Six Or Zero Seven Three Eight Nine Nine Two Six Zero One Eight) any time dude. We will learn many things new also.
Click to expand...
Click to collapse
DUDE... I UNZIPPED THE NANDROID BACKUP AND PLACED IT ON MY SD card..but when i go in to restore it says no files found ...what do i do now..iam stuck between roms..:crying::crying::crying:
please reply quick
BhavyaBirla said:
DUDE... I UNZIPPED THE NANDROID BACKUP AND PLACED IT ON MY SD card..but when i go in to restore it says no files found ...what do i do now..iam stuck between roms..:crying::crying::crying:
please reply quick
Click to expand...
Click to collapse
Please tell me the full structure of unzipped file. Also send me the property view of this folder.
I did it!!
sizariya said:
Please tell me the full structure of unzipped file. Also send me the property view of this folder.
Click to expand...
Click to collapse
I did it.. Thanks..
But I want a god rom.. Like Cyanogenmod..
Could u suggest me some.. I don't pike Miui or lewa
Please help me
hai Sizariya.........thanks buddy....its a nice one......i rooted my xolo q1000.Hope new roms will be available in future.
A small problem is that its taking much time to recharge.Why that happening?
Have anyone noticed in our battery it is written as Li-Polymer. but actuallly it is Li-ion.How that happened??
Hi Sizariya...
Does this one apply on to Xolo Q1000s as well? If not, can you please guide me to something on that?!?
I need to install a recovery module on my phone - either of CWM or TWRP would do.
Thanks,
BhavyaBirla said:
I did it.. Thanks..
But I want a god rom.. Like Cyanogenmod..
Could u suggest me some.. I don't pike Miui or lewa
Please help me
Click to expand...
Click to collapse
OK i dont know if you will understand this but I will just try to explain a little
For making roms like CM, Pac , PA and stuff, You need kernel source code of that device
Without that it is impossible to build CM ( Even the Kitkat CM 11 )
Xolo never gives out kernel source code nor does Mediatek (MTK)
q1000 is Mt6589, so you can try to port from other devices too but building such good roms from scratch without bugs ?? It is impossible
So cheers and wait until someone does that himself
And yeah being in 9th doesnt make you a n00b
The reason you are n00b is that you just never reached out to know more about it
Cheers, have a good one
Protox 109,
Senior Member - Xda Dev
Read the resrt in my Signature
sizariya said:
Xolo Q1000 Stock Nanodroid Backup, Rooting and Flushing CWM Method. (Tested on my own Phone)with Xolo Q1000 Stock Nandroid Backup
Read everything or risk a brick standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. (Well this method will definitely work). Don’t do it if you don’t know what is rooting and CWM.
1. Go to Settings > About Phone.
2. Next, scroll all the way down and tap on About Phone, and you will notice a segment detailing your device’s build number (XOLO
_Q1000_S105_130411).
3. Repeatedly tap on Build Number (seven taps should do the trick) until you’re met with a message that reads: “you are now a developer!”
4. Developer Options will now be available in within the Settings app.
5. Go to settings > developer options > enable USB debugging.
6. Download AND Install MTK Drivers h t t p : / / w w w . m e d I a f I r e . c o m /download/nv96xclhjmaiclu/Mobistel_Cynus_T1_Drivers_x86.exeDownload Here)
7. Reboot your PC.
8. Download and extract the MTK6589 Auto Root folder from the .rar download. H t t p : / / w w w . s e n d s p a c e . c o m /file/v9np38 Download Here)
9. Connect your phone to PC visa USB.
10. Run run.bat from the extracted MTK6589 Auto Root folder.
11. Press any key and wait while it roots your phone
12. After finished, now reboot
13. Now you’re rooted. Verify root with a ‘Root Checker’ app from Play, or run any app you know requires root and you should see a root permissions request.
14. Reboot your phone.
15. Now download Recovery Image and put it in to sd card. H t t p s : / / w w w . b o x . c o m/s/ymebwi7p7s6aegy0cunx Download Here)
16. Download Mobile uncle from play store.
17. Open Mobile uncle and Grand root access to it.
18. There is an option to flush recovery. Select it.
19. It will search the recovery image that is in sd card. Also if you are online then it will show more recovery from internet. I never tried that but they should also work but probably in Chinese language.
20. Select recovery it will ask for permission. Hit ok.
21. It will reboot your phone. Now CWM has been flushed.
22. Now you can do any CWM operations including flushing Touch wiz launcher and xperia keyboard as I already did.
Download: Stock Nandroid Backup for Xolo Q1000 (Untoched) from h t t p : / / d - h . s t / W k T
Click to expand...
Click to collapse
Typo check : It is cwm flashing and touchwiz flashing... Not FLUSHING
cant enter into recovery mode shows option for
recovery
fastboot
normal
but cant select either of them plz urgent help required
Stock Firmware
BhavyaBirla said:
I might sound like a total noob.. that is because iam still in 9th grade..
guys.. could anyone help me to get to the stock rom of xolo q1000
i installed the nandroid backup that was given above..but when i go into recovery, and flash the nanadroid zip the instalation is aborted all the fricking time..:crying:
please help me..iam in need of help..
P.S iam new to xda..
Click to expand...
Click to collapse
Here u go :
http://androidxda.com/download-xolo-stock-rom-model
Dont mention the 9th grade
I am a dev nd im in 10th
njoyy!!
gladiator9120 said:
file not found can u re-upload it please.
Click to expand...
Click to collapse
did you try removing the spaces from the URL given?
those links worked for me
gladiator9120 said:
please find attachment.
Click to expand...
Click to collapse
I guess he must have removed the file.
try this link http://www.needrom.com/download/xolo-q1000/
As a Hacker we always change IMEI ( i dont do anything illegal ) . So now i am here with a post on how to fix IMEI number of any MTK device with a recently unbricked device. So lets start .
Note : All the software used in this are properties of their own companies . This is for information and development purpose only . Please do not try this for illegal purpose. I , nor xda is responsible for any thing which you face . You are responsible for any kind of nuclear war because of this .
Things You will Need :
Team Kustoms One pack solution for IMEI fix ( everything included )
Adb Drivers ( Included )
All download links given below .
So lets get start :
Method 1. ( NON ROOT METHOD )Step 1. Turn you phone Off ( install adb drivers and first check if all drivers are working . )
Step 2. Download and extract the pakage given below ( team kustom's IMEI package . )
Step 3. Install the Meta software given in the package .
Step 4. Open it ( make sure to run it in admin mode - run as admin )
Step 5. Select IMEI download as shown in images below .
Step 6. go to options and select the second option ( shown in images )
Step 7. Click on reconnect and connect you phone via USB ( do not turn it on . keep your phone turned off )
If this doent work then please remove battery and connect and turn the phone on .
You will see a popup relating IMEI tool . Now select the first option ( download Flash file ) and browse the BPLGU file which is in the package
Note : Other phone owner ( other than android one ) can search their BPLGU file in the ALL_MTK_BPLUG zip . This is special file for android one device .
Step 8. Now write both SIM imei ( check your mobile box for it or behind the battery - Writing wrong imei is illeagal )
Step 9. Click on second Option ( update flash file ) and close the imei tool.
Step 10. click on disconnect and turn your phone on . WTF you are on network back
Method 2. ( ROOTED METHOD ) - this wont work for our device and for many device it works .Step 1. Install Uncle mobile tool
Step 2. Open and give this app root access
Step 4. Go to engineer mode
step 5. Go to mtk engineer
Step 6. Or to directly go to engineer mode try this ( note it wont work for all device so use uncle moble application )
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
you can check video tutorial at www.groupflexi.com
Still dont understand how to do this ? Just check this videos :
NON ROOT METHOD : http://www.youtube.com/watch?v=lS4wThAdPmQ&feature=player_embedded
ROOT METHOD : http://www.youtube.com/watch?v=4gRAlf--D8E
DOWNLOAD LINKS AND IMAGES
1. TEAM KUSTOM's IMEI TOOL PACK
2. IMAGES FOR GUIDE .
3. MOBILE UNCLE APK
Credits :
Please Thank me if it worked . MOD make me a recognize contributor or recognize helper or something like that
Like us on www.facebook.com/groupflexi
Visit my website www.groupflexi.com
Buy me a coffee at www.groupflexi.com
Follow me on twitter : www.twitter.com/group_flexi
Reserved
kustom.hackers said:
As a Hacker we always change IMEI ( i dont do anything illegal ) . So now i am here with a post on how to fix IMEI number of any MTK device with a recently unbricked device. So lets start .
Note : All the software used in this are properties of their own companies . This is for information and development purpose only . Please do not try this for illegal purpose. I , nor xda is responsible for any thing which you face . You are responsible for any kind of nuclear war because of this .
Things You will Need :
Team Kustoms One pack solution for IMEI fix ( everything included )
Adb Drivers ( Included )
All download links given below .
So lets get start :
Method 1. ( NON ROOT METHOD )
Step 1. Turn you phone Off ( install adb drivers and first check if all drivers are working . )
Step 2. Download and extract the pakage given below ( team kustom's IMEI package . )
Step 3. Install the Meta software given in the package .
Step 4. Open it ( make sure to run it in admin mode - run as admin )
Step 5. Select IMEI download as shown in images below .
Step 6. go to options and select the second option ( shown in images )
Step 7. Click on reconnect and connect you phone via USB ( do not turn it on . keep your phone turned off )
If this doent work then please remove battery and connect and turn the phone on .
You will see a popup relating IMEI tool . Now select the first option ( download Flash file ) and browse the BPLGU file which is in the package
Note : Other phone owner ( other than android one ) can search their BPLGU file in the ALL_MTK_BPLUG zip . This is special file for android one device .
Step 8. Now write both SIM imei ( check your mobile box for it or behind the battery - Writing wrong imei is illeagal )
Step 9. Click on second Option ( update flash file ) and close the imei tool.
Step 10. click on disconnect and turn your phone on . WTF you are on network back
Method 2. ( ROOTED METHOD ) - this wont work for our device and for many device it works .
Step 1. Install Uncle mobile tool
Step 2. Open and give this app root access
Step 4. Go to engineer mode
step 5. Go to mtk engineer
Step 6. CDMService
Step 7. Enter IMEI number
Note : this post is not yet updated ( i am uploading download files to the server and images ) For Root method i have to add some commands which will be done today . Vist the post back After 1 hour .
Devs Please Recognize me as a recognized developer Please . I am on xda half a day
Click to expand...
Click to collapse
RESERVED .
Plz provide mirror Download Link
i need mirror download link becoz google drive download link is't downloading anything ,
Official Meta post
Moooohit said:
i need mirror download link becoz google drive download link is't downloading anything ,
Click to expand...
Click to collapse
http://en.miui.com/thread-10061-1-1.html
This where we hackers download the thing ...
can i rewrite my imei if i have change the chip in my phone
---------- Post added at 01:21 PM ---------- Previous post was at 01:13 PM ----------
when i try method 2...why it say it is not allowed in userbuild....what does it mean?
No
dewagame said:
can i rewrite my imei if i have change the chip in my phone
---------- Post added at 01:21 PM ---------- Previous post was at 01:13 PM ----------
when i try method 2...why it say it is not allowed in userbuild....what does it mean?
Click to expand...
Click to collapse
Nope . This wont work ! brother its for mtk . But try it....
kustom.hackers said:
Nope . This wont work ! brother its for mtk . But try it....
Click to expand...
Click to collapse
you right, Enumerate com port failed error coming while opening the program
OK I'm stuck, I've installed the Meta 3G software as admin and am running the app as admin, but I cant change the "get version" text to "IMEI Download". What could be causing that?
Image of what im seeing: https://www.dropbox.com/s/63odwuj1a6kq8ci/Meta3GGetVersion.png?dl=0
same here please help us with this
kustom.hackers said:
As a Hacker we always change IMEI ( i dont do anything illegal ) . So now i am here with a post on how to fix IMEI number of any MTK device with a recently unbricked device. So lets start .
Note : All the software used in this are properties of their own companies . This is for information and development purpose only . Please do not try this for illegal purpose. I , nor xda is responsible for any thing which you face . You are responsible for any kind of nuclear war because of this .
Things You will Need :
Team Kustoms One pack solution for IMEI fix ( everything included )
Adb Drivers ( Included )
All download links given below .
So lets get start :
Method 1. ( NON ROOT METHOD )Step 1. Turn you phone Off ( install adb drivers and first check if all drivers are working . )
Step 2. Download and extract the pakage given below ( team kustom's IMEI package . )
Step 3. Install the Meta software given in the package .
Step 4. Open it ( make sure to run it in admin mode - run as admin )
Step 5. Select IMEI download as shown in images below .
Step 6. go to options and select the second option ( shown in images )
Step 7. Click on reconnect and connect you phone via USB ( do not turn it on . keep your phone turned off )
If this doent work then please remove battery and connect and turn the phone on .
You will see a popup relating IMEI tool . Now select the first option ( download Flash file ) and browse the BPLGU file which is in the package
Note : Other phone owner ( other than android one ) can search their BPLGU file in the ALL_MTK_BPLUG zip . This is special file for android one device .
Step 8. Now write both SIM imei ( check your mobile box for it or behind the battery - Writing wrong imei is illeagal )
Step 9. Click on second Option ( update flash file ) and close the imei tool.
Step 10. click on disconnect and turn your phone on . WTF you are on network back
Method 2. ( ROOTED METHOD ) - this wont work for our device and for many device it works .Step 1. Install Uncle mobile tool
Step 2. Open and give this app root access
Step 4. Go to engineer mode
step 5. Go to mtk engineer
Step 6. Or to directly go to engineer mode try this ( note it wont work for all device so use uncle moble application )
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
you can check video tutorial at www.groupflexi.com
Still dont understand how to do this ? Just check this videos :
NON ROOT METHOD : http://www.youtube.com/watch?v=lS4wThAdPmQ&feature=player_embedded
ROOT METHOD : http://www.youtube.com/watch?v=4gRAlf--D8E
DOWNLOAD LINKS AND IMAGES
1. TEAM KUSTOM's IMEI TOOL PACK
2. IMAGES FOR GUIDE .
3. MOBILE UNCLE APK
Credits :
Please Thank me if it worked . MOD make me a recognize contributor or recognize helper or something like that
Like us on www.facebook.com/groupflexi
Visit my website www.groupflexi.com
Buy me a coffee at www.groupflexi.com
Follow me on twitter : www.twitter.com/group_flexi
Click to expand...
Click to collapse
When I format my mobile will imei go to invaild or it stays the no. that I have entered?
It depends
HellIsCool said:
When I format my mobile will imei go to invaild or it stays the no. that I have entered?
Click to expand...
Click to collapse
See it really depends . Its a kind of glitch i think. Sometime while flashing IMEI goes to invalid . But it really depends on your luck or how you use your device. Rough used device will get invalid IMEI means if you keep on flashing things. Like it depends , device can also get bricked but thats on your luck... ie. how unlucky you are... not all device are bricked.
i can't change imei on my samsung galaxy s5 mini (g800f): mtk engineer does not exist in my phone
how to do make this imei change on device powered by qualcomm snapdragon 615 processor??
hi i have a problem with the code *#*#3646633#*#* its not workin on mi s5
what to do ? and i donloaded the pack but saiz i need to buit and need activaision number
I changed my imei number from mtk mobile uncle tool and replaced with an new imei it was a success . The problem I have faced now is the old imei is being replaced some how is there any permanent imei fix method.
kustom.hackers said:
As a Hacker we always change IMEI ( i dont do anything illegal ) . So now i am here with a post on how to fix IMEI number of any MTK device with a recently unbricked device. So lets start .
Note : All the software used in this are properties of their own companies . This is for information and development purpose only . Please do not try this for illegal purpose. I , nor xda is responsible for any thing which you face . You are responsible for any kind of nuclear war because of this .
Things You will Need :
Team Kustoms One pack solution for IMEI fix ( everything included )
Adb Drivers ( Included )
All download links given below .
So lets get start :
Method 1. ( NON ROOT METHOD )Step 1. Turn you phone Off ( install adb drivers and first check if all drivers are working . )
Step 2. Download and extract the pakage given below ( team kustom's IMEI package . )
Step 3. Install the Meta software given in the package .
Step 4. Open it ( make sure to run it in admin mode - run as admin )
Step 5. Select IMEI download as shown in images below .
Step 6. go to options and select the second option ( shown in images )
Step 7. Click on reconnect and connect you phone via USB ( do not turn it on . keep your phone turned off )
If this doent work then please remove battery and connect and turn the phone on .
You will see a popup relating IMEI tool . Now select the first option ( download Flash file ) and browse the BPLGU file which is in the package
Note : Other phone owner ( other than android one ) can search their BPLGU file in the ALL_MTK_BPLUG zip . This is special file for android one device .
Step 8. Now write both SIM imei ( check your mobile box for it or behind the battery - Writing wrong imei is illeagal )
Step 9. Click on second Option ( update flash file ) and close the imei tool.
Step 10. click on disconnect and turn your phone on . WTF you are on network back
Method 2. ( ROOTED METHOD ) - this wont work for our device and for many device it works .Step 1. Install Uncle mobile tool
Step 2. Open and give this app root access
Step 4. Go to engineer mode
step 5. Go to mtk engineer
Step 6. Or to directly go to engineer mode try this ( note it wont work for all device so use uncle moble application )
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
you can check video tutorial at www.groupflexi.com
Still dont understand how to do this ? Just check this videos :
NON ROOT METHOD : http://www.youtube.com/watch?v=lS4wThAdPmQ&feature=player_embedded
ROOT METHOD : http://www.youtube.com/watch?v=4gRAlf--D8E
DOWNLOAD LINKS AND IMAGES
1. TEAM KUSTOM's IMEI TOOL PACK
2. IMAGES FOR GUIDE .
3. MOBILE UNCLE APK
Credits :
Please Thank me if it worked . MOD make me a recognize contributor or recognize helper or something like that
Like us on www.facebook.com/groupflexi
Visit my website www.groupflexi.com
Buy me a coffee at www.groupflexi.com
Follow me on twitter : www.twitter.com/group_flexi
Click to expand...
Click to collapse
Mobile uncle method was really easy , Now i now how unsafe these chinese phones, anyone can change imei no. this is so scary.
Just wanted to confirm it worked on my phone ie : LAVA IRIS 415 , MT6572
Thank you for the reply.. I'll try out.. But for temporary I did it again with mobile uncle tools..
how to fix imei of snapdragon processr
kustom.hackers said:
See it really depends . Its a kind of glitch i think. Sometime while flashing IMEI goes to invalid . But it really depends on your luck or how you use your device. Rough used device will get invalid IMEI means if you keep on flashing things. Like it depends , device can also get bricked but thats on your luck... ie. how unlucky you are... not all device are bricked.
Click to expand...
Click to collapse
I think it is very difficult to got bricked for am MTK chip.
How can I change IMEI if I have 3rd SIM?????????
AT+EGMR=?,??,”my_third_IMEI_code
PLEASE HELP
Just for Info :angel:
DISCLAIMER
I only write, what i am doing on my Phone. What ever you do on your Phone - you doing at your own Risk !
RISK AT THIS MOMENT
Phone is new on Market. By my last Phone after 3 month not firmware by Huawei downloadable ! Continue to wait
Hi, this is my way to root HP20L.
My Build is ANE-LX1 8.0.0.108(C432)
By this way is UserData erased ! Make Backup bevor you go this way !
I found FHMate10Tool.
This is a "DOS-Prompt" program.
- Phone has bootloader-unlock.
- Phone is in bootloader-mode.
- I am start FHMate10Tool as admin. Use point 1 (rooting).
- 4..5 seconds Tool write "phone is rooted" ; Phone reboot; make userdata format lowlevel; reboot
- only your work: beginning by zero (configure: google ...)
- risk to break Phone is minimal.
BUT i have Backup with "dd" from factory-system and factory-recovery-ramdisk. "not tested at this moment"
(test next days, then i make append here)
My THANK'S to @aveemashfaq for inspiration : https://forum.xda-developers.com/9-lite/how-to/guide-backup-partition-using-dd-t3767613
Attention : "dd" is Powerful. Any error by typing and the consequences can be catastrophic ! Nothing for beginners !!!
Check "SuperSU". Install Titanium Backup or what ever you need.
If you wish TWRP, wait ! I am next days testing.
SuperSU is for me full-ok. If you need Magisk - look in forum.
I hope this help you & have fun !
Append 20180415 :
Now we have a good Chance for TWRP(any device !)
Look https://forum.xda-developers.com/android/apps-games/twrpbuilder-t3744253
Download this APP, install on your Phone, follow the instruction
You need from your Phone your "recovery.img" (Nougat) or "recovery_ramdis.img" (Oreo) for upload in APP and a little bit wait-time
TWRP-Builder = the best idea from last 5 year's : :good: :laugh:
Append 20181223 :
First we need BL-unlock. Huawei give us NO BL-unlock-code more. The only that's work is CD-Unlocker. Use DC-Unlocker for reed BL-unlock-code.
If DC-Unlocker not work on your Device - sorry ! Huawei is more and more "closed source" (Example : iPhone)
If you have your BL-unlock-code : unlock the BL (Attention ! This format data. On the End of BL-unlock your Device is "New". NO App's, NO Settings)
The good Way to root your Device is "Magisk". You need on your PC actual Firmware (look in Device Menu/System/Over the Device) as Full-Update Download.
Extract with HuaweiUpdateExtractor "ramdisk.img" (inside is "boot").
Copy the "ramdisk.img" to Device (Example in "Download") and the Same with "MagiskManager.app".
Install "MagiskManager.app" [MM] in Device, start MM, let it create "patched_boot.img", copy "patched_boot.img" to PC inside your ADB-Folder (Example "C:\ADB").
Open DOS-Prompt on your PC, change inside ADB-Folder (Example "cd C:\ADB").
Go with your Device in "bootloader-mode" with
- adb reboot bootloader
Flash "patched_boot.img" in your Device with
- fastboot flash ramdisk patched_boot.img
Reboot your Device with
- fastboot reboot
If Device run open MM, let MM self-update doing (it is need) and check if Device rootet (Example : Play-Store "RootChecker").
With this Way we have root AND Stock-ROM AND OTA-Updates work.
We can restore the Stock-Ramdisk (and have original Stock-ROM without root)
If you need you can TWRP install.
JamesBott said:
Just for Info :angel:
DISCLAIMER
I only write, what i am doing on my Phone. What ever you do on your Phone - you doing at your own Risk !
RISK AT THIS MOMENT
Phone is new on Market. By my last Phone after 3 month not firmware by Huawei downloadable ! Continue to wait
Hi, this is my way to root HP20L.
My Build is ANE-LX1 8.0.0.108(C432)
By this way is UserData erased ! Make Backup bevor you go this way !
I found FHMate10Tool.
This is a "DOS-Prompt" program.
- Phone has bootloader-unlock.
- Phone is in bootloader-mode.
- I am start FHMate10Tool as admin. Use point 1 (rooting).
- 4..5 seconds Tool write "phone is rooted" ; Phone reboot; make userdata format lowlevel; reboot
- only your work: beginning by zero (configure: google ...)
- risk to break Phone is minimal.
BUT i have Backup with "dd" from factory-system and factory-recovery-ramdisk. "not tested at this moment"
(test next days, then i make append here)
My THANK'S to @aveemashfaq for inspiration : https://forum.xda-developers.com/9-lite/how-to/guide-backup-partition-using-dd-t3767613
Attention : "dd" is Powerful. Any error by typing and the consequences can be catastrophic ! Nothing for beginners !!!
Check "SuperSU". Install Titanium Backup or what ever you need.
If you wish TWRP, wait ! I am next days testing.
SuperSU is for me full-ok. If you need Magisk - look in forum.
I hope this help you & have fun !
Click to expand...
Click to collapse
Tool worked for me. Now having access to all root features! Thanks for sharing! :good:
@r00terb3y
thank's for your test and response. :good:
all : if you give thanks, i am happy :laugh:
- if you click on thanks-button : i am very happy :laugh::laugh:
My Test, my phone, my risk !!!
First test with TWRP 3.2.1-0 (Huawei P smart).
TWRP flash + run = ok.
backup : folder (/data/media/0/TWRP) not created (Permission denied)
that's no big surprise : build for other device
Now my question : if here any twrp-developer how give me answer "how much work is it to build twrp for this device ?" 2 hour? 5 hour?
I have no idea, I do not have any twrp build.
if i can help for build (info from inside device, test new build ...) i do it !
a little bit risk is good for my brain : new phone, day 1 : bootloader unlock (warranty : bye - bye), see about twrp.
with extracted "recovery" form https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
no risk to test twrp (thank's to @kilroystyx), switch stock-recovery to twrp and return - all ways work.
Warning for beginner : do you want to do such experiments - a paperweight for 1 € or $ is much cheaper than such this nice phone to turn into one
@JamesBott, the reason that you cannot backup data partition should be other, i suspect that your data partition is encrypted and that might be the reason.
If you are ok testing TWRP's I can try do one for P20 lite
@kilroystyx
if i test twrp:
- flash twrp
- twrp /wipe/format data
- reboot twrp to twrp
- twrp backup data
the twrp for Huawei P smart work on my Honor 9 Lite, not on HP20L.
if you found twrp : i test (give me download link) & if any work : i write here for ALL how need twrp!
with your recovery_ramdis.img(extract from update.app) i can test all twrp.
i flash recovery_ramdis.img and phone is in "delivery state" : work as a "new phone" . it's only my time [flash, test, reflash ...] . problem : for me not
sorry - double save #6
i use this for general info
i am not developer.. i am service. i am learn by doing and help other with my experience
@JamesBott, when I have something to test I'll let you know.
By the way, are you also interested to test CallRecorder MOD?
TWRP backups does not work because the P20 has a different partition layout than previous Huawei phones.
@kilroystyx
sorry : CallRecorder not need. i use my Phone first for Whatsapp (family and friends) and Telegram (special friends).
@mchtt
i think the same. twrp on H9L work, by install and twrp/format data work and msg "need restart for write function-changes". on HP20L : twrp/format data work, but no msg.
test was only a "shot in to the blue". i think, we are to fast. phone is new on market - very new.
my interest is technology : what works, what not.
for me a good phone : bootloader open - twrp - root - adaware. the follow other is secondary.
JamesBott said:
@mchtt
i think the same. twrp on H9L work, by install and twrp/format data work and msg "need restart for write function-changes". on HP20L : twrp/format data work, but no msg.
test was only a "shot in to the blue". i think, we are to fast. phone is new on market - very new.
my interest is technology : what works, what not.
for me a good phone : bootloader open - twrp - root - adaware. the follow other is secondary.
Click to expand...
Click to collapse
Yes but at least we have treble out of the box!
You tried flashing .GSI ?
It flashed flawlessly but the notch is not supported for the moment ?
@mchtt
excuse my question : what you mean "You tried flashing .GSI ?"
My Build is ANE-LX1 8.0.0.108(C432).
I used FHMate10Tool_201711115 to root and I can confirm this is working.
JamesBott said:
@mchtt
excuse my question : what you mean "You tried flashing .GSI ?"
Click to expand...
Click to collapse
.gsi is a system.img you can flash on treble enabled phones.
So you can easily flash LOS, RR or AOSP...
---------- Post added at 11:17 AM ---------- Previous post was at 10:57 AM ----------
JamesBott said:
@mchtt
excuse my question : what you mean "You tried flashing .GSI ?"
Click to expand...
Click to collapse
.gsi is a system.img you can flash on treble enabled phones.
So you can easily flash LOS, RR or AOSP...
@mchtt
i am extracted from full-update.app "recovery_ramdis.img" . test : flash recovery_ramdisk twrp.img and for return flash recovery_ramdis.img.
on H9L test developer-ROM's : flash system dev-sys.img. for return flash system system.img (extract from my own full-update.app)
that's all. never other (boot ...)
damn - double save #16 / is this my guilt ?
@Reversedhex
thank's for you msg. have fun
Reversedhex said:
My Build is ANE-LX1 8.0.0.108(C432).
I used FHMate10Tool_201711115 to root and I can confirm this is working.
Click to expand...
Click to collapse
Just run as admin and press 1 and everything ok?
Just bought the phone, waiting for a RIL and Wi-Fi working AOSP/LOS ROM (I'm a dev but I don't have any idea about Kirin). EMUI doesn't make me miss root.
Overview
Now, I have seen many people facing problems like lost IMEI or NVRAM warning in their wifi list! Well, these are normal errors when you often flash a custom and wiped system or update using SP Flash Tools. So fix isn't that hard! But still, many people suffer from this! Now, this guide is applicable for every device(MTK) but BPLGU modem file will vary from device to device. I have specially made this guide for Lenovo Vibe K4 Note users!:laugh:
WARNING !!! IMEI CHANGING IS ILLEGAL. THIS GUIDE ONLY HELPS YOU HOW TO RESTORE ORIGINAL IMEI OF YOUR DEVICE! I DONT TAKE ANY RESPONSIBILITY OF ANY ILLEGAL ACTION TAKEN AGAIN YOU! BE AWARE IF YOU ARE NOT SURE FOR WHAT IMEI IS USED FOR ALSO I DONT TAKE ANY RESPONSIBILITY OF DEAD DEVICES/ BRICKS! PLEASE DO SOME RESEARCH IF YOU ARE NOT AWARE OF ANYTHING. HOWEVER, THIS GUIDE WILL HELP YOU DEAL WITH THINGS, IF YOU READ CAREFULLY AND FOLLOW INSTRUCTIONS THEN YOU DONT NEED TO WORRY ABOUT ANYTHING!
Click to expand...
Click to collapse
So lets fix it up !
Required stuffs !
Windows PC (7/8/8.1/10)
Usb Cable
Few tools
Drivers
Your device, ofc !
Download Section !
1. Scatter files !
2. MauiMETA
3. Temoprary IMEI fix.zip
Now before we start doing anything make sure you download everything from the download section. Also, make sure your device is having TWRP installed.
Process !
Now most of you must have thought hey Max where is NVRAM fix? There was nothing about NVRAM in title Well chill down I will target NVRAM NOW !! So let us begin! Now as you have downloaded entire scatter files so NVRAM needs entire scatter files. "Woosh! Thank god it was useful somehow" most of you must have thought Hehehe Well one more thing if you are using permanent NVRAM fix then use it before you flash IMEI or else you lose it again if you fix NVRAM after IMEI. However, a temporary fix can be flashed later on.
* Now navigate to the firmware folder
* Look for scatter file open it in notepad or notepad ++
* There look for this line, "partition_name: NVRAM"
* There you will also notice, "s_download: false"
* Just change it to, "s_download: true"
* Save and exit!
* Open Sp flash tools and load scatter file(Remember a thing, you will have to use an older version of SP Flash Tools)
* You will see checkbox of NVRAM just choose it and keep rest options unchecked!
* Flash into your device and all set!
NVRAM IS FIXED PERMANENTLY :good:
But now for those who are lazy doing this, there is a temporary zip file which you can flash and NVRAM problem will be fixed for a limited time to do so just go to download section and download temporary fix zip file and flash it into TWRP (Yes, that's why we needed TWRP):angel:
Now before we start doing anything make sure you download everything from the download section. Also, make sure your device is having TWRP installed. (YES AGAIN MAKE SURE YOU HAVE EVERYTHING)
• After that, run Maui META 3G
• Use USB COM
• From Options menu, select “Connect smartphone in meta mode”.
• Press Reconnect and connect the phone in the switched off state.
• Wait for a minute. Your Device automatically boots into meta mode. The blinking led will become yellow and you can see "connected with target"
• Now from the drop-down menu select “IMEI download”. Click ok till you see IMEI download box.
• Click Change NVRAM Database FIle and browse to “MT6753 DB” folder and select the following file.
File\MT6753\
BPLGUInfoCustomAppSrcP_MT6753_S00_K5_ROW_LWG_V56_ 1_lwg_n (BPLGU modem file for mt6753, do a double check as the name might change with firmware versions).
[Well I have not extracted this file yet from stock ROM scatter files. However, I have given you the download link of entire stock ROM look the file there itself !]
• Click ok on any warning.
• Leave IMEI Increasemnt 0.
• Write first 14 digits of your IMEI in IMEI box and last 15th digits will go in checksum(should be entered automatically). Eg:- if IMEI is 123456789123456, write 12345678912345 in IMEI and 6 in the checksum. Do same for Sim_2
[Now most of you must be wondering where is my IMEI. I don't remember it and also it's not there in the list. Don't worry pull your back cover and you will see IMEI sticker there just type the same IMEI]
• Press Download To Flash. You will see Download IMEI flash successfully. Now close the box (or alt+f4 or close from task manager if stuck).
• Restart the phone
• Open Dialer and type *#06# and you will get your valid IMEI number.
* Well if you saw the same IMEI then you are done !!! :good:
Credits : Yaas !! Why not ?
meprakash_pyc
Sahil_Sonar
KM (One who made NVRAM fix for lazy people :silly
If this post was helpful to you just hit :good: below my posts !
Drivers ?
Hey Maxx where are our drivers? Well, come on relax as you have downloaded scatter files all the drivers are there you can additionally get extra drivers from my https://forum.xda-developers.com/k4-note/how-to/bootloader-unlock-t3846902 another post [/url] Yes the same one! TWRP one! I have added ADB Drivers there follow the same process also there is a manual how to install drivers same is applicable for these drivers!
after loading that modified scatter file, it says that it should not be treu value
yes bro, after modifying scatter file, flash tool wont allow to load it. im hoping this will fix my wifi issue.
royskeyz said:
yes bro, after modifying scatter file, flash tool wont allow to load it. im hoping this will fix my wifi issue.
Click to expand...
Click to collapse
Actually, I have tested this thing on my own device... No idea what's wrong with you. You can also try notepad c++
jaskoooo said:
after loading that modified scatter file, it says that it should not be treu value
Click to expand...
Click to collapse
royskeyz said:
yes bro, after modifying scatter file, flash tool wont allow to load it. im hoping this will fix my wifi issue.
Click to expand...
Click to collapse
Try older version of SPFT.
I've downloaded your drivers and tried many other drivers,None worked,Please help me.With the drivers i have im able to Flash stock through SP,Device gets detected too,But i dont know y its not working for this tool or SN writer..This is the error im getting..Communication through either RS232 or IPC error,Please reconnect..
JaSomTy said:
Try older version of SPFT.
Click to expand...
Click to collapse
Exactly!
where is nvrm file 's ?
where is nvrm file 's ?
Can anyone tell which version of sp tool worked for them? that would really really be helpful
Edit: Files are no longer available on google drive