hello to all, I have a tv tdsystems 50-inch 4k with android tv 7.1.1
I recovered from the manufacturer the firmware of the TV which is called install.img
I wanted to ask if there is someone willing to help me I have to edit the firmware himself with the official app google is root, thanks
Send me yours install. IMG.
My email [email protected] Ru.
I will do edit.
timersky said:
Send me yours install. IMG.
My email [email protected] Ru.
I will do edit.
Click to expand...
Click to collapse
hello sorry but I only read your answer now, I am very grateful for your help since you don't find anything on the internet about this soc, do you have the same TV or a similar one ?? I'm sending you all the content by email
Hello there, i have been searching for the install.img for my Star-X RealtekATV 43" but i cant seem to find it. Mine is stuck in Android LOGO and I cant any other ways to force reset it. please share the Install.img so i can try, thanks
ReagNkyaIV said:
Hello there, i have been searching for the install.img for my Star-X RealtekATV 43" but i cant seem to find it. Mine is stuck in Android LOGO and I cant any other ways to force reset it. please share the Install.img so i can try, thanks
Click to expand...
Click to collapse
hello, you have to ask your producer because almost all the .img files are different according to the manufacturer, I'm looking for a way to root my
I also have a problem like this (freezes in boot animation)
the device is gosonic gled-4350 model and it freezes when I simulate the secondary screen from the developer settings of this device
and I thought to solve the problem by opening the service menu with the service code, but I do not know the code of this device. What should I do?
ErrorVelet said:
I also have a problem like this (freezes in boot animation)
the device is gosonic gled-4350 model and it freezes when I simulate the secondary screen from the developer settings of this device
and I thought to solve the problem by opening the service menu with the service code, but I do not know the code of this device. What should I do?
Click to expand...
Click to collapse
I did the same mistake to my TV. However, I was able to recover from such freeze by forcing the TV to start in safemode. As I remember, I plugged off the TV from the power source. After that I plugged it in again and turned ON the TV from the remote while pressing at the same time on the [Vol-] button. Once I got into the system, I turned off the secondary display and rebooted again. This time everything was fine.
Related
Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed
Sorry I'm not likely to have a fix, but are you sure you unlocked boot loader before attempting to install the boot menu? This could be the cause for the brick.
Are you able to boot to recovery? If so you might be ok. I VERY TENTATIVELY say that if you can get into recovery from there either a factory reset or reflashing a prerooted fw might help BUT if you're able to get there PLEASE don't proceed till someone with more experience chimes in!
I will say that there's hope if you can get to recovery... probably? But this never happened to me.
Have you tried restarting with usb keyboard attached and pressing the print alt screen? Good luck.
Phill360 said:
Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed
Click to expand...
Click to collapse
hi,
I am not an expert on this matter but you should provide detail info exactly what you did to your Fire TV, the exact steps and sequence so folks can help you better.
In the meantime, check these all link out before you do anything. It seems few folks has some success see link 2 and 3 as always try it on your risk. I hope someone else can provide a better solution.
http://www.aftvnews.com/top-ways-to-brick-your-fire-tv/
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
http://forum.xda-developers.com/showthread.php?t=2799779
http://www.aftvnews.com/factory-reset-on-amazon-fire-tv-and-fire-tv-stick-explained/
btw, if you are using amazon fire tv for xbmc as it seems most folks are using it for, i would just get Raspberry PI, it is awesome never had to worry about bricking the damn thing, sure it slower than fire tv but i have use it and i love it, it plays 1080 and 3d movies and no buffering either.
I also fire tv but i am always scared this thing will brick as it seems many folks have this problem.
Thank you
KLit75 said:
Sorry I'm not likely to have a fix, but are you sure you unlocked boot loader before attempting to install the boot menu? This could be the cause for the brick.
Are you able to boot to recovery? If so you might be ok. I VERY TENTATIVELY say that if you can get into recovery from there either a factory reset or reflashing a prerooted fw might help BUT if you're able to get there PLEASE don't proceed till someone with more experience chimes in!
I will say that there's hope if you can get to recovery... probably? But this never happened to me.
Have you tried restarting with usb keyboard attached and pressing the print alt screen? Good luck.
Click to expand...
Click to collapse
Thanks for the reply Klite, I didn't unlock the bootloader before installing the menu so that must have caused the brick.
I'm only able to see the Amazon logo, it does not reach the Fire TV Logo. I have plugged in a USB keyboard but i can't seem to get to recovery.
ashsha7877 said:
hi,
btw, if you are using amazon fire tv for xbmc as it seems most folks are using it for, i would just get Raspberry PI, it is awesome never had to worry about bricking the damn thing, sure it slower than fire tv but i have use it and i love it, it plays 1080 and 3d movies and no buffering either.
I also fire tv but i am always scared this thing will brick as it seems many folks have this problem.
Thank you
Click to expand...
Click to collapse
Hi Ashsha
I do mainly use my FTV for Kodi, I did previously use a Raspberry Pi but i bought this to replace it as i wanted something more powerful due to the problems i was having with stutters during play back.
Thanks for the links too, i did try them but i have had no luck so far.
Does anyone know if it possible to unbrick my FTV via USB using Fastboot or ADB?
Phill360 said:
Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed
Click to expand...
Click to collapse
Phill360 said:
Does anyone know if it possible to unbrick my FTV via USB using Fastboot or ADB?
Click to expand...
Click to collapse
That's a very good question. I know it's pretty much essential to unbrick a kindle fire but can't find any info specific to aftv. But you're motivation to get an answer is greater than mine. Do you have one?
I'd be confident in trying it with a phone or tablet but I just don't know enough about the variables (like could you do more damage sending power to somewhere that has an external power source)
My best advice is to be patient, keep looking for possible fixes online, but I'd caution not to experiment. Instead keep coming back here to get thoughts on possible fixes that might work. At the very least your thread will stay high in the forum search results giving you a better chance of having the right xda member to notice it.
KLit75 said:
That's a very good question. I know it's pretty much essential to unbrick a kindle fire but can't find any info specific to aftv. But you're motivation to get an answer is greater than mine. Do you have one?
I'd be confident in trying it with a phone or tablet but I just don't know enough about the variables (like could you do more damage sending power to somewhere that has an external power source)
My best advice is to be patient, keep looking for possible fixes online, but I'd caution not to experiment. Instead keep coming back here to get thoughts on possible fixes that might work. At the very least your thread will stay high in the forum search results giving you a better chance of having the right xda member to notice it.
Click to expand...
Click to collapse
If you didn't follow the directions and didn't unlock, then it is bricked and the only way to fix it is the hw mod to write to the mmc. If you have an A to A plugged in, on boot it'll stop in the bootloader and fastboot will work, unfortunately there is no commands you can actually run that will do anything. If you don't have an A to A plugged in, it will try to load the boot image. Since you didn't unlock, it won't boot the image, and it'll just die.
if all else fails, you can always go to amazon for replacement, remember amazon fire tv hasn't been a year old yet and you still have warranty for it, thats what i did with mine, i acted i didn't know what i was doing and suddenly it wouldn't load or boot up, etc.. u will need to know ur email adress or account thats associated with ur fire tv.. op korz .. they will do it... 100%
rbox said:
If you didn't follow the directions and didn't unlock, then it is bricked and the only way to fix it is the hw mod to write to the mmc. If you have an A to A plugged in, on boot it'll stop in the bootloader and fastboot will work, unfortunately there is no commands you can actually run that will do anything. If you don't have an A to A plugged in, it will try to load the boot image. Since you didn't unlock, it won't boot the image, and it'll just die.
Click to expand...
Click to collapse
Thanks for the reply rbox.
So what your saying is my Fire TV is dead.
I might just move on then to a new device like the Razor Forge TV when that comes out.
daffung said:
if all else fails, you can always go to amazon for replacement, remember amazon fire tv hasn't been a year old yet and you still have warranty for it, thats what i did with mine, i acted i didn't know what i was doing and suddenly it wouldn't load or boot up, etc.. u will need to know ur email adress or account thats associated with ur fire tv.. op korz .. they will do it... 100%
Click to expand...
Click to collapse
I'd love to return my FTV under warranty but i live in Australia and can't be bothered paying for postage to get it replaced
Just wondering if anyone has worked out a way of fixing this type of Brick?
Not sure was version of the software on, I'm hoping that it might be on 51.1.6.1 or 54.1.2.1
thanks
Phill360 said:
Just wondering if anyone has worked out a way of fixing this type of Brick?
Not sure was version of the software on, I'm hoping that it might be on 51.1.6.1 or 54.1.2.1
thanks
Click to expand...
Click to collapse
Depending on how much of the instructions you actually followed, and if your bootloader is 51.1.0.2 or older, there is a method that @AFTVnews.com is working on a writeup for that should recover it. But if the bootloader wasn't downgraded to 51.1.0.2, then it's dead.
hello all......
Please tell me how to unbrick amazon fire phone. i messed with my phone and i guess while installing CM11 i have deleted partitions and all.... so now when i turn my phone on it stucks on amazon logo...... I am in pakistan and there is no support of amazon. my phone is from At&t..... your help will be appriciated....
best regards,
Furqan Altaf
[email protected]
Go back to CM11 thread look for Question 6 in FAQs in third post. Follow steps carefully.
Hi bro
furqanaltaf said:
hello all......
Please tell me how to unbrick amazon fire phone. i messed with my phone and i guess while installing CM11 i have deleted partitions and all.... so now when i turn my phone on it stucks on amazon logo...... I am in pakistan and there is no support of amazon. my phone is from At&t..... your help will be appriciated....
best regards,
Furqan Altaf
[email protected]
Click to expand...
Click to collapse
Hey dude.. How are.. Can you please tell me if still work The basic entry
To the recovery mode! You can go into it by pressing the power button
+ volume Up.. if u can Access to it please let me know, i will help u!
Marabina said:
Hey dude.. How are.. Can you please tell me if still work The basic entry
To the recovery mode! You can go into it by pressing the power button
+ volume Up.. if u can Access to it please let me know, i will help u!
Click to expand...
Click to collapse
Ohh my. Please help me as well
I've been stuck also. I had safestrap but i cant access it anymore.
I flashed a cleamsystempartion file but I accidentally restart it without flashing new rom and now I am stuck in Fire Phone Logo.
I still can access the stock recovery tho. Please help
i tried to sideload files but im getting error on my fire phone
"E verfication failed" :crying::crying:
Please help
sephisgood said:
Ohh my. Please help me as well
I've been stuck also. I had safestrap but i cant access it anymore.
I flashed a cleamsystempartion file but I accidentally restart it without flashing new rom and now I am stuck in Fire Phone Logo.
I still can access the stock recovery tho. Please help
i tried to sideload files but im getting error on my fire phone
"E verfication failed" :crying::crying:
Please help
Click to expand...
Click to collapse
Update:
I got my phone back from being softbricked by sideloading proper bin file. your computer will only detect your phone if you chose "apply update from ADB"
you should be able to restore it by sideloading stock rom from amazon. you can look also to the stock rom uploaded by @najoor. rename it as update. then start sideloading: adb sideload update.bin
mine took almost 30 mins so be patient
Hello everyone, hope someone would be able to help me recover this phone
The phone gets stuck at the logo screen, left it like that for 7 hours but no change
Recovery mode gives a black screen, not sure if it does access it but display nothing or doesn't access it at all
I have tried using Kies but every time I type the model as per the sticker under the battery, Kies replies with "Please check model number"
I can go into Download mode, Odin detects the phone as COM 3, but doesn't go beyond the initialization step
Some people actually suggested smacking the phone on the power button side, I did it as I was desperate but nothing changed
As the list above states, I am out of ideas and not sure if I can get this phone to work again.
Just to let everyone know, it had a stock firmware, no root and no custom recovery.
faexilion said:
Hello everyone, hope someone would be able to help me recover this phone
The phone gets stuck at the logo screen, left it like that for 7 hours but no change
Recovery mode gives a black screen, not sure if it does access it but display nothing or doesn't access it at all
I have tried using Kies but every time I type the model as per the sticker under the battery, Kies replies with "Please check model number"
I can go into Download mode, Odin detects the phone as COM 3, but doesn't go beyond the initialization step
Some people actually suggested smacking the phone on the power button side, I did it as I was desperate but nothing changed
As the list above states, I am out of ideas and not sure if I can get this phone to work again.
Just to let everyone know, it had a stock firmware, no root and no custom recovery.
Click to expand...
Click to collapse
I have this problem too, did you solve it??
ricsi30 said:
I have this problem too, did you solve it??
Click to expand...
Click to collapse
according to a repair shop, it is more of a hardware issue and some parts would need changing but cost was almost the price of the phone if i were to sell it while working so it wasnt worth it
how was your experience with the battery of the S4 Mini Duos. For how long does ir last ?? and how much time does was it taking ??
Thanks,,
Hi Guys,
I have an Moto XT1676 Running androind 7.0/NP25-137-93/12
And i have an soft lock ,
My Recovery mode is working, I am trying to go back to Stock 6.0 android
I have tried many ways but with no luck, I am trying it for like 15 hours straight and i am really stuck nothing seems to work
Is there an way to unlock USB debugging, And oem
I hope some one could help me
What do you mean by soft lock? you can not install android 6 because the device does not have android 6, in its release and brought android 7 by default, you can only update, if you talk about the device just turn on fastboot mode look in the forum, there are many ways to re-install the stock software of motorola by fastboot
jimmy999x said:
What do you mean by soft lock? you can not install android 6 because the device does not have android 6, in its release and brought android 7 by default, you can only update, if you talk about the device just turn on fastboot mode look in the forum, there are many ways to re-install the stock software of motorola by fastboot
Click to expand...
Click to collapse
Hi Jimmy,
Thanks for your answer I finally have made it boot to android but it ask for my google Account,
And wont accept my credentials How can i bypass this ?
When i log in at google.com, Then it wont show my devices as my other devices
Thanks in advance
DuceCas said:
Hi Jimmy,
Thanks for your answer I finally have made it boot to android but it ask for my google Account,
And wont accept my credentials How can i bypass this ?
When i log in at google.com, Then it wont show my devices as my other devices
Thanks in advance
Click to expand...
Click to collapse
Do a format data in recovery mode - this will erase all data & files from the device
When it boots up you will be at the welcome setup screen
From here you can either create a new Google account & sign in or skip the Google setup altogether to setup at a later point
Hello, i have a problem on my Thomson 55US6106. After touching in developper mod in show pointer or something like this the TV has freeze and after shutdown she always turn on the android logo.. i see few person in my case but i don't find any solution for my TV.
I have tried to downland new software on mytomson but after the installation it's always the same.
Tried to wait 48 hours but after 48 hours it's always on the boot logo.
Tried to click all the buttons on the back of TV (remote don't work in the boot).
Thomson don't want help me cause it's not guaranted.. I hope somewone can help me thank you in advance and nice day.
Few tips about my TV :
Ticket on the back of TV 55US6106
On the main board :
MT58CU
Soft V
40-MT58CU-MAB4HG
55UC6596
08-MT58011-MA200AA
08-CS55CUN-OC407AA
08-MT58011-MA300AA
V8-T658T01-LF1V176 12V
It's all I find on the main board and if you need more, just ask. Thank you so much for who can help me. For 1 300€ i hope the TV will work more than 2,5 years.
Best regards
Flashed PKG file?
I don't really know how flash pkg file or what is exacly
Is complete wipe previous firmware and install new ...as factory reset.
Attached ....
Oh this, yes I have already tried. I download the software on Mytompson but it's always the same :/ The boot android logo loop loads
Thank you friend