Related
Hi,if u like V4A audio efect.ill share how u can use V4A in AEX rom.
First,u must rooted and install busybox.
-Ok if u done upper step,lets boot your zuk z2 into twrp
flash v4a4.2.zip(V4A 4.2) and reboot system.
-Now launch V4A,install driver and reboot
Ok,now its time to update latest V4A version 2.5.0.5
-Install RootExplorer (optional) or u can use twrp file manager to delete V4A 4.2 apk in system.
-Flash V4A 2.5 in twrp and u done.
Optional you can delete apk in system or disable MusicFx.
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
raketman said:
thank you, but i didn't find or couldn't do the delete part with root explorer or twrp, but it worked anyhow.
Click to expand...
Click to collapse
If you using root explorer try find viper4android 4.2 folder in root/system/priv-app.
Thank you for your information. I have got much easier way to use it(if you have magisk installed). First install the viper4android zip using twrp. Reboot. Then open mgix go to download and select viper4android. Just tap on the arrow and tap on install. After installing it will ask your permission to reboot. Just reboot your device and enjoy. Sounds tricky but process is as simple as water.
I flashed ARISE and it worked normally. But as for sound quality...meh
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
arch_geek said:
I don't think sound quality would still be lacking after you installed ARISE. Do share your setup (pm me, this isn't the correct thread) so we could get to the bottom of your issue.
Sorry for OT!
Click to expand...
Click to collapse
zakwanPHG said:
Im just done with arise before..still nid v4a 2.5.0.4 driver. U have seen driver 2.5.0.5?nope,there only 2.5.0.4 driver.v4arise is modded apk and not original one.
Click to expand...
Click to collapse
If the hardware is ****e any kind of software is not going to make it good. It's not magic.
does it work on aex 5.1 ,( the january update)?
Haha, very timely post. I was trying to get Viper for the first time on Oreo two days ago.
One question, are apps other than music players processed by Viper as well? I ask because I installed Arise but emulators and games didn't get audio processing, only my music players.
Thanks!
I'm getting driver install failed error I/o while setting up v4a on Validus 8.1
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Hey I was wondering if viper is working on Oreo or not.
Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
Same on AEX v5.1
Ronnie2017 said:
I m also getting i/o error. I m on nitrogen 8.1 os..
Is this not compatible with 8.1?
Click to expand...
Click to collapse
I'm having same error
I'm on bootleggers ROM March build 8.1 Oreo
Pls help
I finally installed it via magisk
And it's working
Pls suggest some settings to get max phone speaker volume
Stuck on booting
n00b_dr0id said:
I flashed ARISE and it worked normally. But as for sound quality...meh
Click to expand...
Click to collapse
After flashing arise+magnum opus phone stuck in booting.it takes half an hour & nothing happen..
help me
Hello everybody. I have Magisk and couldn't install Viper module, neither the usual viper .zip via TWRP.
Have you been able to install any of the available audio mods on your Z2 Play?
I too am interested.
I prefer the Atmos version, ViPERAtmos 4.8 Sony Beats Universal Edition, but I don't think it's compatible with Nougat.
Any advice would be greatly appreciated!
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
I have a module called viper 4arise installed and its working very well
danielmn97 said:
I installed ARiSE sound system in my z2 play, which contains Viper and Dolby Atmos
Click to expand...
Click to collapse
Could you post a link to the download / thread that worked for you? I can try to install and make a simple tutorial for other folks.
Thanks!
Here https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 install the last stable version
Thanks! I've looked at ARISE a few times, but it seems life meant steps to install. I guess I'm going to have to bear it.
Does it sound as good at Atmos?
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
dainezi said:
I manage to install it. It's overall pretty simple. You can extract the installation .prop file to /emulated/0 and edit it there to get a 1 cycle install. Otherwise your first try will do just that and return an error (so you'll have to edit the file anyways).
I tried all versions of viper there but none worked (all showed abnormal status) also, remember to mark for installation the Magisk compatibility.
I'm using Atmos, working very nicely, but still wish Viper had worked...
Click to expand...
Click to collapse
That's weird, I have Viper and atmos working in my device. Previously I set SElinux permissive and installed Busybox
Oh that must be it. I have it on enforcing. Will test with permissive then. Thanks!
Well, it worked! AriSE with SELinux mode changer set to permissive.
Thanks a lot!
With Dolby and viper our speakers sound WAY better! Headphones are even more awesome!
Hello there,
I've checked out a few threads but can't find any pertaining to my exact situation.
So I'm on OB28, so Oreo OOS, tried a few proposed sound mods but none of them seem to work or else I'm doing something wrong.
Flashed a few compatible TWRP recoveries and rooted. Tried that ARISE mod but either the mods I'm interested in don't work or seem to give me FCs on reboot. Tried random dolby zips which don't do anything. I've even had a "factory data reset" message on startup with an automatic reboot to recovery.
Is there any decent audio mod that works on Oreo OOS (preferably Dolby)? If so, please show me how to get this done.
Thanks
There is no practical way to get Dolby Atmos working on Oreo as of now. Dolby Digital, however, can work. You can flash this mod by guitardedhero:
https://forum.xda-developers.com/showpost.php?p=74880570&postcount=31701
Note that every other audio mod needs to be removed including any in Magisk for this to work. Viper can be flashed after this works but not a priori. SELinux permissive is necessary.
therightperson_630 said:
Hello there,
I've checked out a few threads but can't find any pertaining to my exact situation.
So I'm on OB28, so Oreo OOS, tried a few proposed sound mods but none of them seem to work or else I'm doing something wrong.
Flashed a few compatible TWRP recoveries and rooted. Tried that ARISE mod but either the mods I'm interested in don't work or seem to give me FCs on reboot. Tried random dolby zips which don't do anything. I've even had a "factory data reset" message on startup with an automatic reboot to recovery.
Is there any decent audio mod that works on Oreo OOS (preferably Dolby)? If so, please show me how to get this done.
Thanks
Click to expand...
Click to collapse
get the addon zip from experience os it has viper dolby atmos and they both work
v.konvict said:
get the addon zip from experience os it has viper dolby atmos and they both work
Click to expand...
Click to collapse
Can confirm just did this on Nitrogen 8.1 Dolby & Viper working, great "trick"
gmlogan said:
Can confirm just did this on Nitrogen 8.1 Dolby & Viper working, great "trick"
Click to expand...
Click to collapse
not sure what the dev did with but it works well even when compared to official zips from viper4arise thread
v.konvict said:
get the addon zip from experience os it has viper dolby atmos and they both work
Click to expand...
Click to collapse
Thanks, nice to see one that works! the add-ons are a nice touch too. I think my arise config file must have been wrong.
does it work in enforcing or permissive..i mean with the addon @v.konvict @therightperson_630
Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops
After flashed as your instructions, everything works like a charm bur only ANC not work anymore
I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated
Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app
Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.
Anybody get Dolby to install? I'm getting Api error
Should we install Unity or standard version from the official thread?
vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.
Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take
Hello I got the OnePlus 9 pro as a birthday gift it's the unlocked version wanted to know if there is a guide on how to install viper on the plus9 pro I have the 7pro with viper and it's amazing
Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!
dxcim said:
Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!
Click to expand...
Click to collapse
Man I dumb on how is it
gokou46 said:
Man I dumb on how is it
Click to expand...
Click to collapse
you're talking about Viper4Android right? the audio eq thingie?
dxcim said:
you're talking about Viper4Android right? the audio eq thingie?
Click to expand...
Click to collapse
Yes viper I did not know it was that easy to install
I was thinking that you are talking about Viper rom. That's Awesome !
dxcim said:
Root your phone (via Magisk)
Download the v4a.zip from the official thread
Install the .zip via the Magisk app (install as a module)
Reboot
et voila!
Click to expand...
Click to collapse
That will not work, you just get a driver install infinite loop in V4A app. You need to install JamesDSP before V4A.
Check this thread for details, read all the posts on the 1st page
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com
Arcide said:
That will not work, you just get a driver install infinite loop in V4A app. You need to install JamesDSP before V4A.
Check this thread for details, read all the posts on the 1st page
Viper4Android
Hi guys i used V4A on all of my 1+ devices. Started from the 1+1, 5, 7Pro and now i own the 9 Pro. The phone is rooted with a patched img, Magisk 24.3 installed, stock recovery. OOS Version is 11.12.10.10 Somehow i cant get V4A get to work...
forum.xda-developers.com
Click to expand...
Click to collapse
I guess the JDSP requirement is specific to the 9 Pro then. I just followed the steps I mentioned for my 8T and worked fine. I did get a processing issue (not related to driver installation), but I found a fix in the V4A thread. You can go through the official V4A thread here.
I'm using Dolby Atmos and I think it works fine for me
demonio666 said:
I'm using Dolby Atmos and I think it works fine for me
Click to expand...
Click to collapse
What does that have to do with V4A?
dxcim said:
I guess the JDSP requirement is specific to the 9 Pro then. I just followed the steps I mentioned for my 8T and worked fine. I did get a processing issue (not related to driver installation), but I found a fix in the V4A thread. You can go through the official V4A thread here.
Click to expand...
Click to collapse
Yeah it's specific here I guess. All these people, including me, had this issue. Even after managing to install V4A properly I'm still on JamesDSP, as V4A gives me issues with convolvers and profile loading.