Related
IMPORTANT: Flashing WILL WIPE EVERYTHING SO BACKUP FIRST. (I'm not responsible for anything that goes wrong. You can use this regardless of your firmware version. Just make sure to sideload the proper file for your current firmware!
If the update or sideload ends up failing, flashing the stock firmware with Odin will resolve this. But just be sure to follow all the instructions, AND ALWAYS BACKUP YOUR PHONE. Your phone will factory reset after the update.
Before you proceed prepare these necessary things as follows so you will not screw-up your phone:
• Create a back-up with Smart Switch of all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
• Make sure that your Galaxy S6 Edge Plus battery is fully charged to ensure stability and to get rid of power failure issues while updating.
• TURN OFF the Reactivation Lock - Go to Settings > PERSONAL > Lock screen and security > Find My Mobile and log in your Samsung Account. Then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it-ON, from which you cannot modify the system when it's turned-ON.
• If you disabled some system bloatware manually or with a third party software, make sure everything is enabled again.
G928AUCS5ERD1 to G928AUCS5ERE1: https://drive.google.com/uc?id=1oHCumW40ty2YiT20VRWO6fMe8xAhBJge&export=download
G928AUCS5ERE1 to G928AUCS5ERF2: https://drive.google.com/uc?id=1gXpm5EpCD9hp8iWPISWF53IQb7petNcz&export=download
G928AUCS5ERF2 to G928AUCS5ERG1: https://drive.google.com/uc?id=1XMSpPLP8nITNn4EKserAS6nMzU4Ax9jp&export=download
G928AUCS5ERG1 to G928AUCS6ERH1: https://drive.google.com/open?id=1MwiQz1Sxetc0UxLgtcgLn9dV5gYSfUdg
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
https://drive.google.com/uc?id=1wov38ZbRkpfP6CBULoIJM8plI1fWqffY&export=download
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done. Now repeat steps 1 to 5 until you're on the latest firmware. (Android Nougat)
If i helped you don't forget to hit thanks button.
Security patch level (SPL): August 1, 2018
Baseband version: G928AUCS6ERH1
Build number: NRD90M.G928AUCS6ERH1
What's changing: Android device security updates
i can not find my baseband version it is g928aucs4cpk1
MexZaku said:
i can not find my baseband version it is g928aucs4cpk1
Click to expand...
Click to collapse
Can you explain what you mean by that? If you are on a old android version you can flash this firmware directly to update to 7.0
https://drive.google.com/uc?export=download&confirm=IW6D&id=1WPSXlfRMaZPnunrrU6BKHjCK5JvaT0UX
And after that you can sideload this updates via adb
stek-kravari said:
IMPORTANT: Flashing WILL WIPE EVERYTHING SO BACKUP FIRST. (I'm not responsible for anything that goes wrong. You can use this regardless of your firmware version. Just make sure to sideload the proper file for your current firmware!
If the update or sideload ends up failing, flashing the stock firmware with Odin will resolve this. But just be sure to follow all the instructions, AND ALWAYS BACKUP YOUR PHONE. Your phone will factory reset after the update.
Before you proceed prepare these necessary things as follows so you will not screw-up your phone:
• Create a back-up with Smart Switch of all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, so that you will not lost it just in-case something might went wrong after the update.
• Make sure that your Galaxy S6 Edge Plus battery is fully charged to ensure stability and to get rid of power failure issues while updating.
• TURN OFF the Reactivation Lock - Go to Settings > PERSONAL > Lock screen and security > Find My Mobile and log in your Samsung Account. Then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it-ON, from which you cannot modify the system when it's turned-ON.
• If you disabled some system bloatware manually or with a third party software, make sure everything is enabled again.
G928AUCS5ERD1 to G928AUCS5ERE1: https://drive.google.com/uc?id=1oHCumW40ty2YiT20VRWO6fMe8xAhBJge&export=download
G928AUCS5ERE1 to G928AUCS5ERF2: https://drive.google.com/uc?id=1gXpm5EpCD9hp8iWPISWF53IQb7petNcz&export=download
G928AUCS5ERF2 to G928AUCS5ERG1: https://drive.google.com/uc?id=1XMSpPLP8nITNn4EKserAS6nMzU4Ax9jp&export=download
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
https://drive.google.com/uc?id=1wov38ZbRkpfP6CBULoIJM8plI1fWqffY&export=download
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done. Now repeat steps 1 to 5 until you're on the latest firmware. (Android Nougat)
If i helped you don't forget to hit thanks button.
Click to expand...
Click to collapse
could you share new update G928AUCS5ERH1 ? thnx.
spiderkr said:
could you share new update G928AUCS5ERH1 ? thnx.
Click to expand...
Click to collapse
Sorry for the long wait, the update is UP
Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:
I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again
timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants
hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?
Models:
SM-G770F or SM-G770F/DS
Frequently used key combinations keys:
FORCE REBOOT: Hold "Volume Down" and "Bixby/Power" button.
DOWNLOAD MODE: With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. Release the buttons after you see the "Warning" screen and then press "Volume Up"
RECOVERY MODE: With the phone off, hold "Volume Up" and "Bixby/Power" button.
Some facts:
1. S10 Lite uses dynamic partition which means there is only one "super" partition (instead of "system", "vendor", "product").
3. S10 Lite uses A-only partition which means there is only one set of system partition.
3. S10 Lite uses 2 stage init (2SI).
4. KNOX will be tripped after you flash a custom image. As a result, Samsung Pay and Secure Folder will become permanently (even after restore to stock firmware) unusable and your warranty may be voided. However, many jurisdictions including the European Union has law mandating manufacturer to provide hardware warranty even if user modifies the software.
5. Samsung devices are almost impossible to hard brick (render the device unusable without a hardware-level repair) as critical sections including the bootloader are well-protected. However, if you do things incorrectly, you may soft brick your phone, but that can usually be resolved by resetting to factory settings (wipe data and cache) or restoring to stock firmware (check out Stage 4).
Tools needed:
On your computer:
1. Odin 3.14.4 or newer
2. Samsung Android USB driver
3. SamFirm or other tools/websites to download official firmwares
4. Android Verified Boot Metadata Image with verification disabled (vbmeta_disabled.tar)
On your device:
1. Magisk Manager (Canary builds)
Stage 1: Know your model and carrier code (CSC)
1. Open "Settings"
2. Go to "About phone" -> "Software information"
3. Pay attention to "Service provider SW ver."
4. Starting with "SM-", for example "SM-G770F", that's the model of your phone.
5. Immediately after that, there are two 3-letter code, for example "OXM_PHE". The second 3-letter code "PHE" is your CSC.
6. Remember your model and CSC.
Stage 2: Unlock the bootloader
WARNING: ALL data on your device, including apps, settings and files in internal storage, will be lost. You do not need to repeat this if you didn't re-lock your bootloader.
1. Open "Settings"
2. Turn on "Developer mode" by going to "About phone" -> "Software information" and pressing "Build number" for several times.
3. Go to main menu of "Settings" and at the bottom you will find "Developer options"
4. Go to "Developer options". You will find a toggle "OEM unlocking". Turn it on.
5. Skip to step 8 if your device reboots to "Unlock bootloader?" screen. Make sure the toggle is on and then turn off your phone.
6. With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. (don't use charging only cables)
7. Release the buttons after you see the "Warning" screen. Then, hold the "Volume Up" button.
8. You will see "Unlock bootloader?" screen. Proceed and unlock your bootloader by pressing "Volume Up" button.
9. Your device will be reset to factory settings. Proceed with the Setup Wizard. Only connect to network via Wi-Fi or cellular and skip everything else. (to save time as data will be cleared again later.)
10. Repeat step 1-4 to validate that "OEM Unlocking" is on. If it is not, turn it on.
11. Repeat step 6.
12. Release the buttons after you see the "Warning" screen. This time, press (not hold) the "Volume Up" button.
13. You will see "Downloading" screen. On the top left, there are some important info.
14. Pay attention to "OEM LOCK" and "REACTIVATION LOCK". If both of them are "OFF", you have unlocked the bootloader.
Stage 3: Disable Android Verified Boot
1. Reboot to DOWNLOAD mode. If you are already in the download mode, skip to step 2.
2. Download Odin 3.14.4 or newer and make sure Samsung USB drivers are installed.
3. Open Odin and put the vbmeta_disabled.tar into USERDATA slot and click "Start"
4. Your device will reboot but it will not boot into system as vbmeta signature has changed.
5. Your device will reboot into RECOVERY mode automatically and prompt "You have to reset your device to factory settings". Use "Volume Up" or "Volume Down" button to move and "Power/Bixby" button to select. Confirm and reset the device to factory settings.
6. This is the last time the data on the device has to be cleared. Afterwards, if you don't re-lock bootloader or re-enable the Android Verified Boot, you will not lose your data. Be aware, a stock firmware package contains a Android Verified Boot Metadata Image (vbmeta.img) with verifications enabled. You will need to flash the vbmeta_disable image (put into USERDATA slot) along with the stock firmware (use BL, AP, CP, CSC slots) to make sure AVB is not re-enabled and the data is preserved.
With bootloader unlocked and AVB disabled, it is now possible to boot modified images on the device.
(Stage 4 and below are method to root your phone using your own odin files, if you wish to use a prepatched for a faster way to get root, go to OPTIONAL)
Stage 4: Obtain the official firmware and upgrade
1. Open SamFirm
2. Type in your model and your region (CSC) and click "Check Update"
3. "Download" and you will get a zip file.
4. Extract it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
5. Check the version code, for example (G770FXXU2BTD2). The last 4 letters (BTD2) indicates the version of the firmware. If the version is the same as your current firmware, skip to Stage 5.
Your data will be preserved if you do it right but it is good to have a backup.
6. Open Odin on your computer and reboot your device to DOWNLOAD mode.
7. Put AP, BL, CP files in their Odin slots. It takes time to verify the firmware so be patient.
8. Put HOME_CSC file in CSC slot. Be careful here. Unlike AP, BL, CP slots, you should NOT use CSC file for CSC slot. Instead, you should use HOME_CSC file. CSC file contains partition table (PIT) which will erase all your data.
9. Put vbmeta_disabled file in USERDATA slot so AVB remains disabled and your data preserved.
10. Click "Start" and wait for it to finish. Allow the device to boot into system to complete the upgrade process. Do NOT interrupt/disconnect phones/hold button. It needs to complete the process without interruption or strange BUGs may appear.
Stage 5: Extract boot (kernel) image from firmware
If you are having trouble creating tar file, you can skip to Stage 6. (NOT RECOMMENDED as AP is basically full system image. It is huge (takes long time to flash/process) and Magisk may misbehave.)
1. Extract boot.img.lz4 from the AP file.
2. Use 7-Zip to create a tar archive which contains boot.img.lz4 only. (or "tar cvf boot.tar boot.img.lz4")
Stage 6: Patch the boot (Kernel) image via Magisk
1. Transfer the tar archive (or the AP file if you skipped stage 5) to your phone.
2. Open Magisk Manager.
3. Click top-right "Install" button
4. Make sure "Recovery Mode" is off in Options.
5. Click "Next" and select "Select and Patch a File" in Method.
6. Select the file you transferred to your phone in step 1.
7. Click "Next" and "LET'S GO".
8. Transfer the patched file (in Download/magisk_patched.tar) to your computer
9. Reboot the device to DOWNLOAD mode.
10. Open Odin, put patched file to AP slot and then click "Start".
11. After reboot, Magisk is installed and you will have the root access.
HOW TO upgrade the firmware
Repeat stage 4-6.
(OPTIONAL) Use prepatched magisk boot
1. Make sure that the model and firmware version of the pre-patched image is the exact SAME as yours.
2. Open Odin on your computer.
3. Reboot your device to DOWNLOAD mode.
4. Put pre-patched image into AP slot.
5. "Start"
BEWARE: PREPATCHED BOOT ONLY TESTED ON BTD2 ONEUI 2.1 FIRMWARE
(https://drive.google.com/file/d/1chFXa2w_t2EgbfQIiVDOVR2KUeiwFpUs/view?usp=sharing)
Telegram Support Chat: https://t.me/joinchat/FrDuSBgUxDGSZ1vVmej7fw
*reserved*
Thank you for this amazing guide and the file without which it would not have been possible.
Be sure to join my TG group, if you are interested in AOSP, there's a lineage build testing currently running.
Thanks for this.
But it really is the most difficult way to root i have seen.. I'm not sure how many will try all this just to root a phone.
Awesome
sosimple said:
Thanks for this.
But it really is the most difficult way to root i have seen.. I'm not sure how many will try all this just to root a phone.
Click to expand...
Click to collapse
This will be done by absolutely everyone who wants to root his Galaxy S10 Lite. ABSOLUTLEY EVERYONE!
hey guys i ve just bought s10 lite and rootted it with method upside. but i was apple user for a 3 years before that i used to note 3-4-5 series and it was easy to rootable also i was getting useable stuff like grenify or nice equaliser type apps. ı would like to know how can i enjoy my phone with rooted ? for example i have iphone x with me still and its jailbreaked and there are repo sites that help to get to download app or modules to make you happy with your phone. do we have such stuff in android going on right now ? thanks again for rooting and helps.
4TheBesT said:
hey guys i ve just bought s10 lite and rootted it with method upside. but i was apple user for a 3 years before that i used to note 3-4-5 series and it was easy to rootable also i was getting useable stuff like grenify or nice equaliser type apps. ı would like to know how can i enjoy my phone with rooted ? for example i have iphone x with me still and its jailbreaked and there are repo sites that help to get to download app or modules to make you happy with your phone. do we have such stuff in android going on right now ? thanks again for rooting and helps.
Click to expand...
Click to collapse
If you are not sure what's the purpose of rooting a phone you shouldn't be doing it. "To make you happy with your phone" is a really subject question with no right answer, that depends on your specific needs.
If you ask about modules check out Magisk Modules.
---------- Post added at 09:57 PM ---------- Previous post was at 09:52 PM ----------
Hello, just to confirm that the steps detailed in this guide works, thanks OP, at least this gives us more freedom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
no able to root with this method ! .. step ( v-meta disabler ) with system CP,AP,HOME CSC fail with official binary .. i follow you're steps !
i guess the file v-meta disabler u have attached is not compatible with my device ?! and yes i have same you'res BTD2 ONEUI 2.1 FIRMWARE
teenoo said:
This will be done by absolutely everyone who wants to root his Galaxy S10 Lite. ABSOLUTLEY EVERYONE!
Click to expand...
Click to collapse
In my case, I flashed latest FW (July 2020), Magisk Manager (the "install" buttons were not visible at first, but after some reboots they were). Created patched boot with Magisk Manager, unlocked bootloader (in settings & in bootloader), flashed modified boot image and it worked. At first boot, it restarted, and wen back to recovery, stating that system is corrupted, gave option to factory reset, so I did, it restarted again, and again, and then it booted fine. No VMBETA flashing needed. The trick, was (I suppose) doing the factory reset after flashing the modded kernel. Finally, when the phone booted, I did the usual first-run setup and enabled developer settings / adb installed Magisk Manager - it completed the setup, everything was fine after that.
Is there any way to unlock the bootloader and root SM-G770U1?
kamill85 said:
In my case, I flashed latest FW (July 2020), Magisk Manager (the "install" buttons were not visible at first, but after some reboots they were). Created patched boot with Magisk Manager, unlocked bootloader (in settings & in bootloader), flashed modified boot image and it worked. At first boot, it restarted, and wen back to recovery, stating that system is corrupted, gave option to factory reset, so I did, it restarted again, and again, and then it booted fine. No VMBETA flashing needed. The trick, was (I suppose) doing the factory reset after flashing the modded kernel. Finally, when the phone booted, I did the usual first-run setup and enabled developer settings / adb installed Magisk Manager - it completed the setup, everything was fine after that.
Click to expand...
Click to collapse
I was about to give up on the July update until I read this and tried a few more things. Bad internet caused missing "Install" buttons and I tried patched the WHOLE AP...instead of just patching a boot.tar like in Stage 5. So gooder internet, Odin-ing only the AP with the Magisk patched boot.tar, another wipe,
Code:
adb install .\MagiskManager-v7.5.1.apk
and I was rooty tooty.
I didn't care about burning everything on the phone. I think that some of the extra steps here were for trying to minimize the wipes. Thanks for the extra hope @kamill85 !
Are there download links for official images somewhere without paying? Everywhere i searched you needed to sign in and pay..
Thanks,
SamFirm
sosimple said:
Are there download links for official images somewhere without paying? Everywhere i searched you needed to sign in and pay..
Thanks,
Click to expand...
Click to collapse
Did you look up SamFirm like in the instructions? It pointed me to this page: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 That says it's deprecated but it was able to get me the July 2020 FW for the S10e. I didn't try the other thing, Updato that it points you to. I ran the exe in the zip and pushed a few buttons and it worked for me. No waiting 20 hours. Hope that helps!
dim42 said:
Did you look up SamFirm like in the instructions? It pointed me to this page: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 That says it's deprecated but it was able to get me the July 2020 FW for the S10e. I didn't try the other thing, Updato that it points you to. I ran the exe in the zip and pushed a few buttons and it worked for me. No waiting 20 hours. Hope that helps!
Click to expand...
Click to collapse
Thanks. What Deprecated meant? What iis the difference from original?
the show stopper said:
Is there any way to unlock the bootloader and root SM-G770U1?
Click to expand...
Click to collapse
+1
Also curious if anyone's gotten this working with the US version
So if i do this ill never ever be able to use Samsung pay ever again?
Vaughnn said:
Models:
SM-G770F or SM-G770F/DS
Frequently used key combinations keys:
FORCE REBOOT: Hold "Volume Down" and "Bixby/Power" button.
DOWNLOAD MODE: With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. Release the buttons after you see the "Warning" screen and then press "Volume Up"
RECOVERY MODE: With the phone off, hold "Volume Up" and "Bixby/Power" button.
Some facts:
1. S10 Lite uses dynamic partition which means there is only one "super" partition (instead of "system", "vendor", "product").
3. S10 Lite uses A-only partition which means there is only one set of system partition.
3. S10 Lite uses 2 stage init (2SI).
4. KNOX will be tripped after you flash a custom image. As a result, Samsung Pay and Secure Folder will become permanently (even after restore to stock firmware) unusable and your warranty may be voided. However, many jurisdictions including the European Union has law mandating manufacturer to provide hardware warranty even if user modifies the software.
5. Samsung devices are almost impossible to hard brick (render the device unusable without a hardware-level repair) as critical sections including the bootloader are well-protected. However, if you do things incorrectly, you may soft brick your phone, but that can usually be resolved by resetting to factory settings (wipe data and cache) or restoring to stock firmware (check out Stage 4).
Tools needed:
On your computer:
1. Odin 3.14.4 or newer
2. Samsung Android USB driver
3. SamFirm or other tools/websites to download official firmwares
4. Android Verified Boot Metadata Image with verification disabled (vbmeta_disabled.tar)
On your device:
1. Magisk Manager (Canary builds)
Stage 1: Know your model and carrier code (CSC)
1. Open "Settings"
2. Go to "About phone" -> "Software information"
3. Pay attention to "Service provider SW ver."
4. Starting with "SM-", for example "SM-G770F", that's the model of your phone.
5. Immediately after that, there are two 3-letter code, for example "OXM_PHE". The second 3-letter code "PHE" is your CSC.
6. Remember your model and CSC.
Stage 2: Unlock the bootloader
WARNING: ALL data on your device, including apps, settings and files in internal storage, will be lost. You do not need to repeat this if you didn't re-lock your bootloader.
1. Open "Settings"
2. Turn on "Developer mode" by going to "About phone" -> "Software information" and pressing "Build number" for several times.
3. Go to main menu of "Settings" and at the bottom you will find "Developer options"
4. Go to "Developer options". You will find a toggle "OEM unlocking". Turn it on.
5. Skip to step 8 if your device reboots to "Unlock bootloader?" screen. Make sure the toggle is on and then turn off your phone.
6. With the phone off, hold "Volume Down" and "Volume Up" button, connect your phone to a computer via a cable. (don't use charging only cables)
7. Release the buttons after you see the "Warning" screen. Then, hold the "Volume Up" button.
8. You will see "Unlock bootloader?" screen. Proceed and unlock your bootloader by pressing "Volume Up" button.
9. Your device will be reset to factory settings. Proceed with the Setup Wizard. Only connect to network via Wi-Fi or cellular and skip everything else. (to save time as data will be cleared again later.)
10. Repeat step 1-4 to validate that "OEM Unlocking" is on. If it is not, turn it on.
11. Repeat step 6.
12. Release the buttons after you see the "Warning" screen. This time, press (not hold) the "Volume Up" button.
13. You will see "Downloading" screen. On the top left, there are some important info.
14. Pay attention to "OEM LOCK" and "REACTIVATION LOCK". If both of them are "OFF", you have unlocked the bootloader.
Stage 3: Disable Android Verified Boot
1. Reboot to DOWNLOAD mode. If you are already in the download mode, skip to step 2.
2. Download Odin 3.14.4 or newer and make sure Samsung USB drivers are installed.
3. Open Odin and put the vbmeta_disabled.tar into USERDATA slot and click "Start"
4. Your device will reboot but it will not boot into system as vbmeta signature has changed.
5. Your device will reboot into RECOVERY mode automatically and prompt "You have to reset your device to factory settings". Use "Volume Up" or "Volume Down" button to move and "Power/Bixby" button to select. Confirm and reset the device to factory settings.
6. This is the last time the data on the device has to be cleared. Afterwards, if you don't re-lock bootloader or re-enable the Android Verified Boot, you will not lose your data. Be aware, a stock firmware package contains a Android Verified Boot Metadata Image (vbmeta.img) with verifications enabled. You will need to flash the vbmeta_disable image (put into USERDATA slot) along with the stock firmware (use BL, AP, CP, CSC slots) to make sure AVB is not re-enabled and the data is preserved.
With bootloader unlocked and AVB disabled, it is now possible to boot modified images on the device.
(Stage 4 and below are method to root your phone using your own odin files, if you wish to use a prepatched for a faster way to get root, go to OPTIONAL)
Stage 4: Obtain the official firmware and upgrade
1. Open SamFirm
2. Type in your model and your region (CSC) and click "Check Update"
3. "Download" and you will get a zip file.
4. Extract it and you will get 5 files (AP, BL, CP, CSC and HOME_CSC). All files are in tar format and can be opened by 7-Zip, WinRAR or other software.
5. Check the version code, for example (G770FXXU2BTD2). The last 4 letters (BTD2) indicates the version of the firmware. If the version is the same as your current firmware, skip to Stage 5.
Your data will be preserved if you do it right but it is good to have a backup.
6. Open Odin on your computer and reboot your device to DOWNLOAD mode.
7. Put AP, BL, CP files in their Odin slots. It takes time to verify the firmware so be patient.
8. Put HOME_CSC file in CSC slot. Be careful here. Unlike AP, BL, CP slots, you should NOT use CSC file for CSC slot. Instead, you should use HOME_CSC file. CSC file contains partition table (PIT) which will erase all your data.
9. Put vbmeta_disabled file in USERDATA slot so AVB remains disabled and your data preserved.
10. Click "Start" and wait for it to finish. Allow the device to boot into system to complete the upgrade process. Do NOT interrupt/disconnect phones/hold button. It needs to complete the process without interruption or strange BUGs may appear.
Stage 5: Extract boot (kernel) image from firmware
If you are having trouble creating tar file, you can skip to Stage 6. (NOT RECOMMENDED as AP is basically full system image. It is huge (takes long time to flash/process) and Magisk may misbehave.)
1. Extract boot.img.lz4 from the AP file.
2. Use 7-Zip to create a tar archive which contains boot.img.lz4 only. (or "tar cvf boot.tar boot.img.lz4")
Stage 6: Patch the boot (Kernel) image via Magisk
1. Transfer the tar archive (or the AP file if you skipped stage 5) to your phone.
2. Open Magisk Manager.
3. Click top-right "Install" button
4. Make sure "Recovery Mode" is off in Options.
5. Click "Next" and select "Select and Patch a File" in Method.
6. Select the file you transferred to your phone in step 1.
7. Click "Next" and "LET'S GO".
8. Transfer the patched file (in Download/magisk_patched.tar) to your computer
9. Reboot the device to DOWNLOAD mode.
10. Open Odin, put patched file to AP slot and then click "Start".
11. After reboot, Magisk is installed and you will have the root access.
HOW TO upgrade the firmware
Repeat stage 4-6.
(OPTIONAL) Use prepatched magisk boot
1. Make sure that the model and firmware version of the pre-patched image is the exact SAME as yours.
2. Open Odin on your computer.
3. Reboot your device to DOWNLOAD mode.
4. Put pre-patched image into AP slot.
5. "Start"
BEWARE: PREPATCHED BOOT ONLY TESTED ON BTD2 ONEUI 2.1 FIRMWARE
(https://drive.google.com/file/d/1chFXa2w_t2EgbfQIiVDOVR2KUeiwFpUs/view?usp=sharing)
Telegram Support Chat: https://t.me/joinchat/FrDuSBgUxDGSZ1vVmej7fw
Click to expand...
Click to collapse
Anyway to get to pass the safety nets?
Yes i pass safety net, but i use systemizer and with it i cant pass.
When I switch off systemizer in magisk I pass safety net
Hi guys I know their are threads how to do this but they are all over the place, If you'd like a complete tutorial, that will get your 2020 MOTO G Stylus phone rooted without any errors let me know.
Edit: It looks like people are interested so here goes. The tutorial below is for the 2020 version I tested on Android 10 on two variants. This method once followed correctly will take no more than 30 min tops. Not sure if this will work on updated versions but you could try at your own risk. If this helped you leave a like, if you have any questions let me know.
prerequisites:
PC (duh lol)
Fully Charged Device
Motorola Account (for bootloader unlock purposes)
adb fastboot installed (take note of your folder location especially the platform-tools folder
motorola drivers (link in step 5 if drivers don't install correctly after connecting phone)
Tutorial:
Unlocking bootloader
1. first step is to unlock bootloader(all data will be erased) for this you will need your unlock key
2. go to settings, about phone build # hit a bunch of times to enable developer options
3. once enabled go to developer option enable OEM unlock, disable automatic update (do not update), and enable USB debugging.
4. while phone is on plug into pc to allow drivers to install, also allow usb debugging when prompted. go to where you have adb installed and go in the platform tools folder (this is where I do everything on my phones without errors) hit shift+right click and choose "open command window here" type in "adb devices" without quotes and check if the device is present.
5. now to test if you have fastboot drivers power off phone, then hold power+volume down to enter fastboot mode, plug phone into your computer and repeat step 4 this time typing "fastboot devices" if your phone shows up move on to next step if not download Motorola drivers and install then repeat this step. You can get the driver here and install https://combofile.com/index.php?a=downloads&b=file&id=3396.
6. once your device is detected its time to unlock bootloader, go to https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a sign in and follow the steps, they are simple and straight forward so I won't list them here. Once unlocked restart your phone, set up and proceed to below steps.
Rooting
1. with bootloader unlocked time to get root. download the latest magisk manager (23 I believe) let it install and power off your phone we will use it later. We will be getting the specific boot image for your device through temporary twrp.
2. go to https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-5-0.4155041/ and download TWRP credits to @vache. Place the file in your platform-tools folder.
3. enter fastboot mode (by now it should be second nature) and plug into pc, verify fastboot device connected, by opening command window again in platform-tools folder
4. once verified type the following command without the quotes "fastboot boot twrp-3.5.0-0-rav-sofia.img" be patient, when it boots into twrp, cancel any password creation.
5. go to backup and select storage, choose a sd card, do not decrypt or do anything besides what I'm saying here. it will take you back to the beginning after sd card selected as storage, click backup and select only boot at the very top and creat backup. once done go out to twrp main menu and hit reboot, select "reboot system"
6. now to patch boot, open magisk manager and go to install, it will then give you the option to locate and patch boot.img, however we will be going into twrp backup on your sd card and locate boot.emmc.win (not the other two) once selected hit lets go on Magisk and allow it to patch. your patched boot.img will be in a download folder on your internal memory. Copy that file to your computer and then again move it to platform-tools folder
7. power off device and enter fastboot mode for the final time connect to pc, open command window in platform-tools folder and type the following command without the quotes "fastboot flash boot nameofbootfile.img" hit enter and allow to flash, once completed type "fastboot reboot" your device should now reboot, don't worry if it takes slightly longer than usual.
8. finally go into the magisk manager and let it complete its setup, it should reboot one more time and boom, you have root, remember to use magisk hide, That's it all set. If followed correctly this should only take about 30 min to a hour.
Shucks! I thought this was a tutorial.
zapjb said:
Shucks! I thought this was a tutorial.
Click to expand...
Click to collapse
I got you, updated tutorial up. Let me know if it helps.
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Killabee0311 said:
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Click to expand...
Click to collapse
I'm pretty sure a factory reset would restore to 11 not 10. As the 11 update replaced the 10 OS altogether.
Killabee0311 said:
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Click to expand...
Click to collapse
I'm not sure if a factory reset would take the OS back to 10, you might need to search around for downgrade options. I'd advise anyone not to update to android 11, 10 is great especially with root. I have magisk pass safteynet, and even able to play pokemon go with gps spoof and smali patcher.
kgalv419 said:
I'm not sure if a factory reset would take the OS back to 10, you might need to search around for downgrade options. I'd advise anyone not to update to android 11, 10 is great especially with root. I have magisk pass safteynet, and even able to play pokemon go with gps spoof and smali patcher.
Click to expand...
Click to collapse
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
EpicSaga said:
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
Click to expand...
Click to collapse
Ok if you have your unlock code you should still be able to unlock bootloader. However the first thing you need to do is enable your developer options and enable OEM unlock, enable USB debugging and disable automatic updates that should stop updates you can also go on app info when you get the notification and disable notifications for system updates. If you have an unlock bootloader you should be able to root even android 11
kgalv419 said:
Ok if you have your unlock code you should still be able to unlock bootloader. However the first thing you need to do is enable your developer options and enable OEM unlock, enable USB debugging and disable automatic updates that should stop updates you can also go on app info when you get the notification and disable notifications for system updates. If you have an unlock bootloader you should be able to root even android 11
Click to expand...
Click to collapse
Thank you very much. How do I disable automatic updates and how do I go on app info to disable notifications for system updates? Now a message is on the same screen that says that if I don't restart my phone by the 21st, it will automatically update it.
For downgrading to android 10:
1. Grab the moto flash tool from here
2. Grab the a10 firmware from your device here
3. Unzip the moto flash tool and put the firmware zip in the folder called firmware
4. Plug your device in to your pc in bootloader mode
5. Start the moto flash tool and follow the instructions
(Unlocked bootloader required)
EpicSaga said:
Thank you very much. How do I disable automatic updates and how do I go on app info to disable notifications for system updates? Now a message is on the same screen that says that if I don't restart my phone by the 21st, it will automatically update it.
Click to expand...
Click to collapse
Pretty sure theres a setting in developer options to turn off automatic updates.
ph4n70m-404 said:
Pretty sure theres a setting in developer options to turn off automatic updates.
Click to expand...
Click to collapse
Yes, it's off, and it's been turned off, but I still got a message from Motorola that if I don't restart my phone so that the security patch can update, it will restart automatically on the 21st( a few hours from now).
EpicSaga said:
Yes, it's off, and it's been turned off, but I still got a message from Motorola that if I don't restart my phone so that the security patch can update, it will restart automatically on the 21st( a few hours from now).
Click to expand...
Click to collapse
I don't know of any solution to this but you should be able to update and keep magisk if you let it do the ota update then use the magisk manager to flash to the other slot.
ph4n70m-404 said:
Pretty sure theres a setting in developer options to turn off automatic updates.
Click to expand...
Click to collapse
I already turned it off, but I still got the notification for the update.
ph4n70m-404 said:
I don't know of any solution to this but you should be able to update and keep magisk if you let it do the ota update then use the magisk manager to flash to the other slot.
Click to expand...
Click to collapse
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
EpicSaga said:
I already turned it off, but I still got the notification for the update.
Click to expand...
Click to collapse
I got a notification again today saying that it will update today if It don't do it manually.
EpicSaga said:
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
Click to expand...
Click to collapse
Assuming you have a non Verizon or any other oem that blocks unlocking the bootloader follow the steps from the original post:
(step one makes no sense they wrote it kinda weird)
2. go to settings, about phone build # hit a bunch of times to enable developer options
3. once enabled go to developer option enable OEM unlock, disable automatic update (do not update), and enable USB debugging.
4. while phone is on plug into pc to allow drivers to install, also allow usb debugging when prompted. go to where you have adb installed and go in the platform tools folder (this is where I do everything on my phones without errors) hit shift+right click and choose "open command window here" type in "adb devices" without quotes and check if the device is present.
5. now to test if you have fastboot drivers power off phone, then hold power+volume down to enter fastboot mode, plug phone into your computer and repeat step 4 this time typing "fastboot devices" if your phone shows up move on to next step if not download Motorola drivers and install then repeat this step. You can get the driver here and install https://combofile.com/index.php?a=downloads&b=file&id=3396.
6. once your device is detected its time to unlock bootloader, go to https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a sign in and follow the steps, they are simple and straight forward so I won't list them here. Once unlocked restart your phone, set up and proceed to below steps.
EpicSaga said:
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
Click to expand...
Click to collapse
you can install magisk manager with bootloader locked but there is no sense in installing it on locked bootloader, because when you unlock your bootloader your devices will be factory reset, if you checked my instructions you will see that magisk manager is needed to patch boot.img that you will get from TWRP backup. You seem a bit green about the whole fastboot process, if that's the case I'd advise you to do a little reading up on adb fastboot, which needs to be installed to unlock your bootloader, if you go in blind you can brick your device and I wouldn't want that.
kgalv419 said:
...I'd advise you to do a little reading up on adb fastboot, which needs to be installed to unlock your bootloader, if you go in blind you can brick your device and I wouldn't want that.
Click to expand...
Click to collapse
Sometimes it's been a couple years between me rooting phones. When I come back to root another phone I read & read & read & read some more here. And I have in case the shtf a back up phone to be safe.
EpicSaga said:
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
Click to expand...
Click to collapse
Re: bootlock unlock code email
I went on the Lenovo/Motorola website just yesterday and input the long 5-line code from my phone (required) from SDK platform. Once I did this, the website replied that I will receive email with a unique 20-character bootloader unlock code (this is the part you should check again). Instead of getting a code, the email asked that I first "verify my email", so I followed the directions, clicked the link, the link brought me to their website and I was able to verify my account. Once that happened, the page just kinda froze. So I repeated the process and when I clicked the "verify email" button, it brought me again to the website but thus time to my profile page. There was no Bootloader Unlock Code, nor was I emailed the code as assured as I was, as per their website suggests. I repeated the process a 3rd time but the same thing happened. And when I tried to went back #2 + #3 times, I input all the information again, clicked on the "send email" link (where they email you the 20-character code) I never received any additional emails. I only received 1 email (the first time I input this into their website). So, the site will only work 1 time per unique phone (serial). I called customer support and got nowhere! I have Metro by T-Mobile Motorola Moto G Stylus XT2043-4. I hope you see this and please let me know if you are able to unlock or get a email code as promised (or not). And if you have any information on how else to solve this issue, please let me know. I hope this helps & my apologies for being a bearer of bad news. If I solve this issue, I will respond back.
Hello Guys
I want to tell how to bypass RMM state: prenormal to install TWRP
Also this will resolve "Only official binaries are allowed"
Disclaimer
:
I am NOT responsible for any damage done if you use my guide.
It worked for me 100% and should normally work for everybody!
Feel free to share to anyone else or to embed if you want.
-------------------------------------------------
1. Download latest Stock base via SamFirm
2. Install latest Stock base via Odin Odin v3.13.1 direct download
3. Boot into system
4. Skip the setup
5. Activate Developer settings
6. search and turn of automatic system update
7. Go to time settings and deactivate automatic time
8. Turn back the day for more than 7 days. ( I have turned to the 20th Dec 2018)
9. Search for Software update -> Don't install update
10. Look if latest time searched for updates is the date which you have set. (for me 20th Dec 2018)
11. Reboot your device
12. go into the time settings and reactivate the automatic time
13. Search again for software update - > Still don't install
14. Go to Developer settings
15. deactivate OEM Unlock and reactivate
16. Go to download mode and you will don't see RMM state anymore
18. install TWRP by odin
19. boot into TWRP
20. format data
21. reboot recovery
22. flash verity.zip // found on https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
23. Et voilà! You got completely functional TWRP on your device with Pie Bootloader
24. Flash your preferred Rom!
-------------------------------------------------
Made by @Leirox, i'm not trying to copy this copy paste, this is for kg **** prenormal, have fun as leirox sad
Thanks to:
zxz0O0 for SamFirm
Have Fun