My relative bought me a phone from USA the J6 plus and i am going to use it in India, but volte is not working, the data works but calling functionality doesn't work. So, i need help with this, if anyone knows what should i do?
Software issue bruh..
Just flash the official firmware for Galaxy J6+. Use Samfirm to download the software, set the region as INS.
Related
Hi
I bought an LTE N5210 note 8 from HK via a company called Panamoz. Unfortunately, it is not getting updates beyond 4.1.3, and I know that 4.2.2 is available for it. Does anyone know how to reset the CSC such as it reports that its a UK note, or indeed, can I flash the UK Firmware?
Not really interested in root cause it stops a couple of banking apps I use working, but I guess I can root, flash then unroot?
Anyone else had any experience of the HK note, I dont really want to brick my device.
I can confirm that it works fine with LTE from EE - something else that I am reading might break if I update it to the UK firmware.
Nigel
Hello,
I have a Galaxy S9, Model: SCV38. Is there a way to enable VoLTE on the phone to be used for Indian carriers? If there is some other post discussion, do point out.
If the correct firmware is installed, then it'll work. If not, then you're out of luck.
You might be able to flash the carrier's firmware using Odin (I did that on my S9+ to get VoLTE working on EE UK, as the phone had generic firmware).
Hey I need some help, I have a Galaxy S9 AT&T version but I don't live in the United States. The phone works just fine but I don't receive any updates even through smart switch. I'd like to know how to install the U1 version which is Samsung's carrier free version to my phone. Can anyone tell me the steps and which U1 version should I install?
Hello and awesome Easter everyone!
I live in Norway and used to have an Asus ROG Phone II until last week, I swapped it with a Note 10+ 5g Korean edition.
The phone is working nice and it is A LOT BETTER than the ROG, that phone is a powerhouse, but the software, not so much...
With this phone I have a few problems:
•Lots of stuff in Korean
•Cannot save home numbers with country code or the contact name won't show when anyone calls or text.
•Norwegian language not fully supported.
Everything else works flawlessly and I love the phone so I wonder if there is anyway I can fix this, even if I have to root, it's not a problem. Been thinking if I could flash firmware from the 975f as it 8s the same soc.
Will be very appreciated if someone could help me with this!
Have no problems with flashing and rooting, just don't do it for a long time. Thanks in advance!
Is it carrier branded? If so, try flashing the KOO csc firmware, that may help with some of your issues.
You can't flash the N975F firmware, as it's not meant for the 5G variant.
The N976B model is the 5G variant, but it also cannot be flashed to the N976N.
I have KOO installed now and i have all the "problems". I know the 976b have snapdragon 5g modem and i have exynos. Oh well gonna have to live with it! Thanks for the help!
SM-N976B is Exynos.
Edit: just curious, have you been able to get it working with 5G?
my sim is not 5g nor we have 5g in my area yet unfortunately
Same situation
i also have note10 + 5g korean version and i want to get rid of the korean SK blootware
Model SM-N976N
.and some korean language in some of my settings app
Galaxy members
And more
Could you help me with this
Haidar72 said:
i also have note10 + 5g korean version and i want to get rid of the korean SK blootware
Model SM-N976N
.and some korean language in some of my settings app
Galaxy members
And more
Could you help me with this
Click to expand...
Click to collapse
You can use PD MDM package blocker to kill the bloatware at boot up. Useful to have.
Thanks it's work =)) not exactly what i wanted to but it's fine . I disabled all the korean blootware :good:
If you open a individual app in PD, in the upper left corner is a box. If you check it the PD MDM widget will toggle any checked app on or off.
If will clear data in apks better than doing it in Settings can; presumably PD leaves no nulls.
If you ever get the flashing screen warning thing *oh no* you need to deactivate PD MDM as system administrator.
PD runs in safe mode! It's been very stable and haven't seen this happen in years.
Haidar72 said:
Same situation
i also have note10 + 5g korean version and i want to get rid of the korean SK blootware
Model SM-N976N
.and some korean language in some of my settings app
Galaxy members
And more
Could you help me with this
Click to expand...
Click to collapse
flash koo firmwere download through sammobile
I have bought SM-N976N but the seller had flashed SM-N975F firmware in it. I have now flashed it with KOO version of SM-N976N but my problem is that the phone is not recognizing sims or carrier in it (not even 3G or 4G) Ping test is always failing. BTW I am from Pakistan.
So my question is , Can I flash OXM version of SM-N976B cz my region will be covered in it. Because samsung has not launched a PAK version of firmware of SM-N976N.
Please help how will I be able to get my sims working in Pakistan with or without root? Please help anyone.
Hello Experts,
I have a Samsung Galaxy S20+ 5G purchased in Canada and not associated with any service provider. I am planning to use it in India and I have 2 SIM's in India. Samsung Canada Firmware does not have eSIM feature and there is no SIM Card Manager function in settings. Can I flash any other region firmware and have the eSIM feature enabled ?
The question should b e, does the snapdragon variant support e-sim, cos am stuck with a S20 +5g purchased in usa but no e-sim
Galaxy devices in India are typically Exynos variants which offer eSIM functionality. Flashing different firmware on a Galaxy S Series Snapdragon variant won't enable eSIM. None of Galaxy's Snapdragon variants except The Fold are eSIM capable.
phrozenwire said:
Hello Experts,
I have a Samsung Galaxy S20+ 5G purchased in Canada and not associated with any service provider. I am planning to use it in India and I have 2 SIM's in India. Samsung Canada Firmware does not have eSIM feature and there is no SIM Card Manager function in settings. Can I flash any other region firmware and have the eSIM feature enabled ?
Click to expand...
Click to collapse
Hi I have a same model Canadian S20+ 5G , G986W , I'm from india can u plssss help to enable LTE+ , it's shows only LTE , how to enable LTE+ ???
I would like to know how to enable esim in
СМ-G986W as well. Maybe by changing region or something else
Hi guys, I finally got rid of my G986W. I've converted it to G986U1:
Firmware: https://samfw.com/firmware/SM-G986U1/TMB/G986U1UES3GWA2
SAMFW Odin Flash: https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Just flash firmware with included Odin Flash (Add all files except HOME_CSC and don't use USERDATA.
I've flashed and my S20+ reborn as a true phone with eSim functionality and etc.
0x0null said:
The question should b e, does the snapdragon variant support e-sim, cos am stuck with a S20 +5g purchased in usa but no e-sim
Click to expand...
Click to collapse
It does, bit esim is disabled in Canada, by soft. Instal U1(xaa) instead of W soft, esim will be enabled.
Have u tried installing a Esim? Is it working fully?
MGoris said:
Hi guys, I finally got rid of my G986W. I've converted it to G986U1:
Firmware: https://samfw.com/firmware/SM-G986U1/TMB/G986U1UES3GWA2
SAMFW Odin Flash: https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Just flash firmware with included Odin Flash (Add all files except HOME_CSC and don't use USERDATA.
I've flashed and my S20+ reborn as a true phone with eSim functionality and etc.
Click to expand...
Click to collapse
Sureshtuty said:
Have u tried installing a Esim? Is it working fully?
Click to expand...
Click to collapse
Works without any problems, especially since I'm in Europe.
0x0null said:
The question should b e, does the snapdragon variant support e-sim, cos am stuck with a S20 +5g purchased in usa but no e-sim
Click to expand...
Click to collapse
all s20+ 5g should support esim. (esim is inegrated to a snapdragon chip) BUT some of them are dissabled by software. but such a models like 986U or 986V, for example, were lock by operator and you could not install a software from U1, that includes esim support. i might be wrong. i installed U1 soft to a 986W model (that was without esim support. Now, esim works perfect. s20+ updates online. samsung pay works correct, knox works as well)
RR0077 said:
all s20+ 5g should support esim. (esim is inegrated to a snapdragon chip) BUT some of them are dissabled by software. but such a models like 986U or 986V, for example, were lock by operator and you could not install a software from U1, that includes esim support. i might be wrong. i installed U1 soft to a 986W model (that was without esim support. Now, esim works perfect. s20+ updates online. samsung pay works correct, knox works as well)
Click to expand...
Click to collapse
I have Lost 2nd Physical sim option after update to OneUI 5.1, on my 988B, before the update i was using both physical sims ok. Now only 1 physical sim and 1 eSim option is there. Please help
I am trying to flash a U1 firmware. I keep getting Fail (Auth) on Odin. I'm using a patched ver 3.14.1 of Odin.
I've selected USB debugging on my phone. What am I missing?
Can anyone help?