I am Argentine and practically do not speak English, so I will use the translator and it will not be the most accurate.
I am one of the people who change the ROOM of my cell phone every week and until nothing, 1 month I almost get the "Error 7 updater" in TWRP when installing any ROOM AOSP, but in ROOMS xiaomi does not happen, I have seen videos on which said that I had to modify a text inside the room and others, which works and removes the error but at the time of using the device it does not work for me:
The flashlight, the camera, does not recognize the PC, has no audio and so on.
I can not find any way out of that error, and I'm a fan of pixel experience, I went back to Miui because I wanted to use the gestures they had a few days since I missed them when I had the buttons on the screen, but when I wanted to reinstall the pixel experience came out that error, and with any other room that is not MIUI, please the one that can help me I thank you :good:
You need to flash official twrp recovery. download recovery from https://dl.twrp.me/whyred/ and place it in you internal storage or sdcard et cetra and flash from your current recovery. I hope this will solve your problem.
But remember that the link i mentioned above is only for whyred (Note 5 Pro)
thanks your answer, but that does not solve the problem, in fact I already have installed the twrp 3.3.0.0
Nicolasloleggio said:
thanks your answer, but that does not solve the problem, in fact I already have installed the twrp 3.3.0.0
Click to expand...
Click to collapse
1. unlock bootloader
2. Boot twrp temporarily and then flash twrp.img from twrp recovery (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again (very important)
6. Flash pixel experience ROM
7. Reboot to system
Do this and you are good to go
I followed the instructions but it doesn't work. all aosp roms cannot be installed by error 7 in twrp
A mí me pasó instale la ROM Havoc y volví a Miui... después me salió ese error 7 cuando quise instalar la pixel experience lo solucione haciendo el 'format data' borrando la memoria interna.
I performed the following instructions on my phone (360 hours of waiting)
1. unlock bootloader ok
2. from fastboot (fastboot boot twrp-3.3.0-0-whyred.img) boot twrp temporarily and then flash twrp-3.3.0-0-whyred.img from twrp recovery to recovery partition (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again
6. Flash pixel experience ROM
but it does not work error 7
assert failed: whyred .verify_trustzone("tz.bf.4.0.7-00082") == "1"
updater process ended with ERROR: 7 error installing zip file ....
unfortunately I can't install custom rom aosp
if I install rom whyred miui.eu it works perfectly
ancer said:
I performed the following instructions on my phone (360 hours of waiting)
1. unlock bootloader ok
2. from fastboot (fastboot boot twrp-3.3.0-0-whyred.img) boot twrp temporarily and then flash twrp-3.3.0-0-whyred.img from twrp recovery to recovery partition (always flash latest twrp recovery)
3. Format data
4. Wipe >> advanced wipe >> wipe system data cache and dalvik cache
5. Reboot to twrp recovery once again
6. Flash pixel experience ROM
but it does not work error 7
assert failed: whyred .verify_trustzone("tz.bf.4.0.7-00082") == "1"
updater process ended with ERROR: 7 error installing zip file ....
unfortunately I can't install custom rom aosp
if I install rom whyred miui.eu it works perfectly
Click to expand...
Click to collapse
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
01Thesam said:
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
Click to expand...
Click to collapse
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
ancer said:
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
Click to expand...
Click to collapse
Were you on MIUI pie beta before trying the flashing?
PE is based on Oreo firmware, if you flash it when you have Pie firmware, error 7 will come up.
01Thesam said:
Download Miflash official tool and Latest fastboot firmware file. Connect your device in fastboot mode and flash stock rom. After flashing complete.
1. unlock bootloader (this time there will be no waiting time).
2. Flash latest twrp.
3. Now, You can flash any rom without errors.
Click to expand...
Click to collapse
RKStyles said:
Were you on MIUI pie beta before trying the flashing?
PE is based on Oreo firmware, if you flash it when you have Pie firmware, error 7 will come up.
Click to expand...
Click to collapse
before flashing was with global 10.2.2. android ??? Oreo? I do not remember
ancer said:
before flashing was with global 10.2.2. android ??? Oreo? I do not remember
Click to expand...
Click to collapse
Check your firmware version in about section. Last oreo version was 9.3.14.
ok it works now
I used miflash ====> flashing the rom stock development 9.5.9 Pie
windows powershell ====> fastboot boot twrp-3.3.0-0-whyred.img
in twrp format date wipe >> advanced wipe >> wipe system data cache and dalvik cache
Reboot to twrp recovery once again
Flash custom ROM
:good:
thank you all very much
ancer said:
first of all thank you
but
stock rom is global 10.2.2.0?
Is it dangerous for roll-back?
now I don't have any roms inside the phone
Click to expand...
Click to collapse
Don't worry i was on the same situation as you are on right now and i did as what i told you and my device is back. Or As last try install latest Pitch Black Recovery from source forge
01Thesam said:
Don't worry i was on the same situation as you are on right now and i did as what i told you and my device is back. Or As last try install latest Pitch Black Recovery from source forge
Click to expand...
Click to collapse
sir, can you give me the link of the Oreo firmware that you flashed? thanks
goodygoods said:
sir, can you give me the link of the Oreo firmware that you flashed? thanks
Click to expand...
Click to collapse
Follow this steps to flash any custom roms, after Miui 10 Pie without any errors - ( USE ONLY PITCHBLACK RECOVERY ).
1. Go to recovery, Wipe data, cache, vendor.
2. Now install, Firmware. ( around 50mb ).
3. Again wipe data, cache, vendor.
4. install rom.
5. install gapps.
6. Go to recovery
( SKIP THIS STEP, YOU CAN USE LAZY FLASHER )
- advance.
- tools.
- Dm-verity.
- install.
7. wipe dalvik cache.
8. reboot.
ENJOY
Firmware Link : http://bit.ly/2I6XIxE
01Thesam said:
Follow this steps to flash any custom roms, after Miui 10 Pie without any errors - ( USE ONLY PITCHBLACK RECOVERY ).
1. Go to recovery, Wipe data, cache, vendor.
2. Now install, Firmware. ( around 50mb ).
3. Again wipe data, cache, vendor.
4. install rom.
5. install gapps.
6. Go to recovery
( SKIP THIS STEP, YOU CAN USE LAZY FLASHER )
- advance.
- tools.
- Dm-verity.
- install.
7. wipe dalvik cache.
8. reboot.
ENJOY
Firmware Link : http://bit.ly/2I6XIxE
Click to expand...
Click to collapse
Thank you so much sir, this helps a lot! :good:
goodygoods said:
Thank you so much sir, this helps a lot! :good:
Click to expand...
Click to collapse
Welcome man !
01Thesam said:
Welcome man !
Click to expand...
Click to collapse
sir I tried flashing lazyflasher but there was an error so I wanna try that advance > tools stuff but when I go to advanced there is no tools option
goodygoods said:
sir I tried flashing lazyflasher but there was an error so I wanna try that advance > tools stuff but when I go to advanced there is no tools option
Click to expand...
Click to collapse
Use pitch black recovery and if still got error then don't worry no need to flash lazy flasher
Related
How to flash MIUI Global stable ROM in Xiaomi Redmi 1s. I am currently on Nougat based ROM.
I tried fastboot method by flash tool but no luck.
Also tried flashing recovery file by TWRP again not worked.
Please help me to flash MIUI
I thing MIUI recovery and unroot is needed
saurabhrakshak said:
How to flash MIUI Global stable ROM in Xiaomi Redmi 1s. I am currently on Nougat based ROM.
I tried fastboot method by flash tool but no luck.
Also tried flashing recovery file by TWRP again not worked.
Please help me to flash MIUI
I thing MIUI recovery and unroot is needed
Click to expand...
Click to collapse
Just go to twrp wipe all thing ( systm ,data ,cache,dalvik ) then reboot recvry
Then install miui 8.2 or any build and then reboot thts its it will take long time to instal dnt panic
vjadhikari said:
Just go to twrp wipe all thing ( systm ,data ,cache,dalvik ) then reboot recvry
Then install miui 8.2 or any build and then reboot thts its it will take long time to instal dnt panic
Click to expand...
Click to collapse
I did this but error occurred
Which file I have to flash??
I tried recovery zip but due to less system space falshing error occured
clean flash MIUI ROM
error will appear
clear dalvik-cache
flash the rom again
EmanzzKie said:
clean flash MIUI ROM
error will appear
clear dalvik-cache
flash the rom again
Click to expand...
Click to collapse
Can you tell me step by step procedure
Which file should download..Can I flash the zip using TWRP ?
saurabhrakshak said:
Can you tell me step by step procedure
Which file should download..Can I flash the zip using TWRP ?
Click to expand...
Click to collapse
Follow this exactly. This works for me, but right now Im not using stock rom.
Requirements:
Latest version of twrp 3.0.2-1;
If you can't flash the rom switch to twrp version 3.0.2
A backup of files
1. Download latest MIUI Rom for Redmi 1s
(You can get it on google)
2. Put Rom into your sd card
3. Reboot to recovery
4. Wipe>Advanced Wipe
- Dalvik cache
- cache
-system
-data
-internal storage (backup your files)
5. Swipe to wipe
6. Flash rom via Install>select storage > sd card > (find your rom)
7. Either flashing will be successful or not
If not then error will appear, then wipe dalvik cache
8. Flash the rom again
-it should work (requirement applies)
Changing recoveries might help (dunno why)
Try switching to philz touch
Then clean flash rom
saurabhrakshak said:
I did this but error occurred
Which file I have to flash??
I tried recovery zip but due to less system space falshing error occured
Click to expand...
Click to collapse
Did u rebooted recvry aftr wiping all ?
And if error occured again flash it . it will be flashd i am sure .
vjadhikari said:
Did u rebooted recvry aftr wiping all ?
And if error occured again flash it . it will be flashd i am sure .
Click to expand...
Click to collapse
EmanzzKie said:
Follow this exactly. This works for me, but right now Im not using stock rom.
Requirements:
Latest version of twrp 3.0.2-1;
If you can't flash the rom switch to twrp version 3.0.2
A backup of files
1. Download latest MIUI Rom for Redmi 1s
(You can get it on google)
2. Put Rom into your sd card
3. Reboot to recovery
4. Wipe>Advanced Wipe
- Dalvik cache
- cache
-system
-data
-internal storage (backup your files)
5. Swipe to wipe
6. Flash rom via Install>select storage > sd card > (find your rom)
7. Either flashing will be successful or not
If not then error will appear, then wipe dalvik cache
8. Flash the rom again
-it should work (requirement applies)
Changing recoveries might help (dunno why)
Try switching to philz touch
Then clean flash rom
Click to expand...
Click to collapse
Gonna try.. I let you know
Thanks in advance :good:
saurabhrakshak said:
Gonna try.. I let you know
Thanks in advance :good:
Click to expand...
Click to collapse
YES WORKED..
clear all then flash first time got error
again clear all catch internal external reboot to recovery
then flashed
Successed :good:
saurabhrakshak said:
YES WORKED..
clear all then flash first time got error
again clear all catch internal external reboot to recovery
then flashed
Successed :good:
Click to expand...
Click to collapse
Yeppp
How to install native root, miui v.8.2.1.0
zam09 said:
How to install native root, miui v.8.2.1.0
Click to expand...
Click to collapse
Fastboot twrp as redmi 1s doesn't have boot loader locked next flash SuperSU zip
I have now tried to install the latest RR and Omnirom builds and the problem remains the same.
I've been very particular about wiping data before the installs.
Here is what I have done,
Performed data wipe by typing "yes" when requested. Used advance wipe to wipe everything.
Installed Rom, Stock Gapps and Magisk zip files.
Wiped Cache.
Reboot
The phone will not boot and only returns to recovery.
Can anyone help?
Here is my TWRP log if this helps - https://pastebin.com/ghpXkt3t
Not sure if this is relevant, but every time I try to flash a ROM it always fails on the first attempts and needs a second try to succeed.
TylerDurdenK said:
I have now tried to install the latest RR and Omnirom builds and the problem remains the same.
I've been very particular about wiping data before the installs.
Here is what I have done,
Performed data wipe by typing "yes" when requested. Used advance wipe to wipe everything.
Installed Rom, Stock Gapps and Magisk zip files.
Wiped Cache.
Reboot
The phone will not boot and only returns to recovery.
Can anyone help?
Click to expand...
Click to collapse
If you only get to the mi logo and not the ROM boot screen then format data "yes 3-4 times in a row.
If that doesn't work then wipe the system and data and retry
I was only getting the Mi logo, so I did the format data 4 times in a row and rebooted.
I then saw the Omnirom logo for the first time!
unfortunately 2 seconds later I'm back in TWRP.
I have now tried for the 5th time to perform a fresh install.
Formatting data multiple times, wiping system and data multiple times.
The result is the same.
I see a flicker of the Omnirom logo and I get booted back into recovery.
TylerDurdenK said:
I see a flicker of the Omnirom logo and I get booted back into recovery.
Click to expand...
Click to collapse
Please try this:
1. Wipe: Dalvik / Art Cache; System; Data; Cache;
2. Go back to main TWRP screen and install the rom, install Google Apps, install "addonsu-15.1-arm64-signed.zip" (in case of Lineage) or the latest Magisk (in case of other rom)
3. Wipe Cache
4. Reboot
If this doesn't work and the device restarts in twrp, then pls download the twrp flashable Xiaomi rom from here: http://en.miui.com/download-334.html
1. Wipe: Dalvik / Art Cache; System; Data; Cache
2. Go back to main twrp screen and install the Xiaomi rom. Do not reboot.
3. Go back to main twrp screen and Wipe: Dalvik / Art Cache; System; Data; Cache
4. Go back to main twrp screen and install the rom (Lineage or OMNI or RR), install Google Apps, install "addonsu-15.1-arm64-signed.zip" (in case of Lineage) or the latest Magisk (in case of other rom)
5. Wipe Cache
6. Reboot
I had the same problem and this method worked for me, maybe it will work for you too. :fingers-crossed:
If it doesn't then maybe you have to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (bootloader might relock), flash twrp and then flash new custom rom.
No idea what happened but I have the same issue atm.
I was running a recent Omnirom for a few weeks. System got unstable, so decided to flash the newest version. Got me stuck in a bootloop. I tried everything, short of relocking and unlocking the bootloader.
- Full wipe, including storage
- Reflash Global Dev through TWRP.
- Flash stock Global Dev over flashboot
- Flash Omni, wipe, flash omni again.
All the same. Global Dev runs, all AOSP roms just go into bootloop. No idea what went wrong, I've flashed tens of custom roms over the past months without issues.
Firipu said:
No idea what happened but I have the same issue
All the same. Global Dev runs, all AOSP roms just go into bootloop. No idea what went wrong, I've flashed tens of custom roms over the past months without issues.
Click to expand...
Click to collapse
Then maybe the right solution to get out of bootloops would be to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (as bootloader will relock), flash twrp, do a full wipe and then flash new custom rom.
senerex said:
Then maybe the right solution to get out of bootloops would be to start from zero and flash the original Xiaomi rom in fastboot mode (rom here: http://en.miui.com/a-234.html) via MIUI ROM Flashing Tool, unlock bootloader (as bootloader will relock), flash twrp, do a full wipe and then flash new custom rom.
Click to expand...
Click to collapse
I have reflashed the original Xiaomi ROM (running it atm ) using the official Xiaomi Flash Tool.
I just did not relock my bootloader doing that (there's an option to leave it unlocked). Will relocking and then unlocking the bootloader really make a difference?
Firipu said:
I have reflashed the original Xiaomi ROM (running it atm ) using the official Xiaomi Flash Tool.
I just did not relock my bootloader doing that (there's an option to leave it unlocked). Will relocking and then unlocking the bootloader really make a difference?
Click to expand...
Click to collapse
Not really. You ev. save yourself a waiting time of 72h....
Not sure what happened. I set up MIUI completely. Then, getting frustrated after using it for 10 minutes, decided to try one more time. Same thing.
1) Fastboot flash TWRP.
2) Wipe
3) Flash Rom
4) Flash GAPPS
Worked this time. No idea what went wrong the first 4 times. Only difference is that I went through the trouble to set up the entire phone this last time before trying again.
Anyhoo, so if anyone has the same issue. Set up phone in MIUI, only then wipe/flash
I got mine working by not installing Magisk. I just flashed Omnirom and GApps and it worked.
After setting up my phone I have since rebooted into recovery and installed Magisk and it works.
Can't system boot after install TWRP, Lazy Magisk on MIX M2S
Hello,
I have this problem, the phone does not boot after TWRP, Lazyflasher and Magisk being installed all fine.
I have re-installed the official ROM on my Xiaomi MI MIX 2S, then TWRP is fine too, then Lazy and Magisk fine.
When I reboot, it is stocked on MI logo whatever I do.
I have tried most of the advise posted but still stocked.
I restarted from scratch, installing again the official ROM, then fastboot flash recovery twrp, then lazy and Magisk, but still stocked on MI.
Thanks a lot in advance
Did you wipe system by any chance.. If you did you need to flash miui again with fastboot.. Or boot into fastboot and type this command 'fastboot format userdata' and press enter. You are facing this issue because of encryption
goxthak0 said:
Did you wipe system by any chance.. If you did you need to flash miui again with fastboot.. Or boot into fastboot and type this command 'fastboot format userdata' and press enter. You are facing this issue because of encryption
Click to expand...
Click to collapse
Gratitude for your reply. What do you mean by "wipe system". I installed the rom and then TWRP etc...
I flashed the ROM again and went into bootloader
I typed "fastboot format userdata" and the system replied:
"/usr/local/bin/mke2fs failed with status 1
mke2fs failed: 1
error: Cannot generate image for userdata
Can you advise.
Thanks a LOT
Did you use the correct rom ? Mi mix 2 or mi mix 2s?
fotocreaman said:
Did you use the correct rom ? Mi mix 2 or mi mix 2s?
Click to expand...
Click to collapse
I used MI MIX 2D:
As in en.miui web site
https://en.miui.com/download-343.html
Author: MIUI Official TeamVersion: V10.0.9.0.PDGMIFH (MIUI10) Size: 1.7G
My mobile is:
MI MIX 2S, Android 9PKQ1
MIUI Global 10.0
Thanks a lot for your advise as always stock, despite different attempts
Did you try to flash using mi tools?
fotocreaman said:
Did you try to flash using mi tools?
Click to expand...
Click to collapse
NO, I followed the usual process with ADB tools.
However, I have no boot "stuck at MI logo (bootloop)" problem when I flash the ROM.
It happens only when use TWRP and flash Magisk and Lazy.
Then, when I restart it got stuck at MI Logo.
Do you suggest I try to flash with MI logo (I don't have a PC though).
If so, should I just flash the ROM and then, what about TWRP, should I use MI flash or ADB?
I just want to make sure that the problem is with the ROM instal?
Thanks a LOT
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Arafa1994 said:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Click to expand...
Click to collapse
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Sent from my Lenovo P2a42 using XDA Labs
sm00th4f3 said:
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Click to expand...
Click to collapse
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Arafa1994 said:
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Click to expand...
Click to collapse
What do you mean The bootloader is the bootloader.
Danoz88 said:
What do you mean The bootloader is the bootloader.
Click to expand...
Click to collapse
In my moto Z Play some roms needs Nougat bootloader like xperince
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Arafa1994 said:
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Click to expand...
Click to collapse
We only have one bootloader.
We have different firmwares though like nougat and marshmallow.
You will need Firmwares S244 for nougat ROMs.
That firmware must be flashed through ota. Stockrom-feature. Simply using twrp does not count as doing otas.
Basic starter things: Have Firmware S244 or S251 installed through stock ota feature.
Then use my earlier stated instructions.
Thx alot it worked & no problems
So I have followed this guide https://github.com/tkchn/daisyinstall to install custom ROM, but I always get this error, k install device open error. Can anyone give me other instructions?
itwasmistake said:
So I have followed this guide https://github.com/tkchn/daisyinstall to install custom ROM, but I always get this error, k install device open error. Can anyone give me other instructions?
Click to expand...
Click to collapse
Assuming that you've unlocked the bootloader and properly installed ADB drivers:
Boot to fastboot
Type: fastboot boot X:/location_of_Offain_TWRP.img
Tap cancel
Go to wipe, then format data, then type yes, then enter.
Go back to the Wipe menu, Wipe Cache, Data, System, Internal storage
Go back to TWRP Menu
Flash the ROM you want to install
Flash the TWRP Installer
Then go to reboot menu
Change slot (A to B or B to A)
Then Reboot to Recovery
Then flash Force Encryption Disabler
Flash Magisk
Flash GApps
Then finally, reboot system.
RFD80M-75679 said:
Assuming that you've unlocked the bootloader and properly installed ADB drivers:
Boot to fastboot
Type: fastboot boot X:/location_of_Offain_TWRP.img
Tap cancel
Go to wipe, then format data, then type yes, then enter.
Go back to the Wipe menu, Wipe Cache, Data, System, Internal storage
Go back to TWRP Menu
Flash the ROM you want to install
Flash the TWRP Installer
Then go to reboot menu
Change slot (A to B or B to A)
Then Reboot to Recovery
Then flash Force Encryption Disabler
Flash Magisk
Flash GApps
Then finally, reboot system.
Click to expand...
Click to collapse
This didn't work for me, i tried flashing 3 different custom roms for my mi a2 lite, installed 2 different rec, tried wipeing everything yet i still get the error.
lauwiedweep said:
This didn't work for me, i tried flashing 3 different custom roms for my mi a2 lite, installed 2 different rec, tried wipeing everything yet i still get the error.
Click to expand...
Click to collapse
i don't remember where but you have to search for the modified twrp, i think is on the guide of installing custom rom
The official ones don't work for a10 and posterior versions
Kaimilo said:
i don't remember where but you have to search for the modified twrp, i think is on the guide of installing custom rom
The official ones don't work for a10 and posterior versions
Click to expand...
Click to collapse
I don't know about the android 10 as i always flash it via fastboot with an automatic installer
lauwiedweep said:
I don't know about the android 10 as i always flash it via fastboot with an automatic installer
Click to expand...
Click to collapse
you can see if it's android 10 when you are downloading the rom version
What rom are you aiming for?
Kaimilo said:
you can see if it's android 10 when you are downloading the rom version
What rom are you aiming for?
Click to expand...
Click to collapse
Aosp android 11 or do you mean specific?
Xiaomi EU Rom based on MIUI 12
ONLY FOR CURTANA DON'T FLASH ON JOYEUSE
Other roms port:
1. Masik X
2. MIUI ROG
Instructions:
1. Download
2. Flash Xiaomi.EU rom zip in TWRP
3. Flash firmware: 11.0.10
4. Format data if your data is encrypted / Wipe data if your data is decrypted | + wipe cache
5. If reboot to fastboot, flash stockboot.zip in recovery and reboot.
Your data partition will be decrypted too after flashing this rom
6. Magisk patches not needed anymore, but do check Magisk patches from third post to see if there is anything necessary.
Warning: Other roms may not flash successfully after flashing this rom. I blame their flashing procedure.
Workaround: Either flash stock or eu rom or old masik rom from fastboot.
Downloads: (Old links will be archived to ensure you are on latest build)
09.08.2020 Recovery Rom
Release Channel
Stock Boot
Mirrors are welcome, tag/quote me if you mirror, thank you
Changelog: Post #2
Bugs:
Turning on haptic feedback will cause systemui crash on scheenshots
CTS fail
Support: Telegram
If you like my work and want to support this project, consider buying me a mouse or something (i don't drink beer) or at least press thanx button. Thank You.
XDA:DevDB Information
eucurtana, ROM for the Redmi Note 9 Pro
Contributors
Sudeep Duhoon
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2020-08-09
Created 2020-08-09
Last Updated 2020-08-10
Changelog:
09.08.2020
1. Initial Build
Reserved
Boot-loop from 11.0.10, there is nothing to recovered. Now I'm back to stock
Let me try it if I would have any problem I'll send you log
Okay I came from miui 11.0.10 global rom done everything as in the thread and keep bootlooping
ghoster76 said:
Boot-loop from 11.0.10, there is nothing to recovered. Now I'm back to stock
Click to expand...
Click to collapse
Mine works flawlessly!! Here are quick step I do.
Step 1: after flash 11.0.10, I wipe data (that one which need u to type in ”yes");
Step 2: flash this Rom;
Step 3: flash stockbboot.zip n reboot;
Step 4: a vibrate on booting and MIUI logo will appears;
Step 5: all done. Activate ur phone n finish the setup;
Step 6: **optional**, flash magisk if u need root. If not, then proceed with step 5.
All done! Cheers!!!
rikhailwindzar said:
Mine works flawlessly!! Here are quick step I do.
Step 1: after flash 11.0.10, I wipe data (that one which need u to type in ”yes");
Step 2: flash this Rom;
Step 3: flash stockbboot.zip n reboot;
Step 4: a vibrate on booting and MIUI logo will appears;
Step 5: all done. Activate ur phone n finish the setup;
Step 6: **optional**, flash magisk if u need root. If not, then proceed with step 5.
All done! Cheers!!!
Click to expand...
Click to collapse
With these steps works fine for me Thanks
For who came from miui 11.0.10.0, follow these steps, will thank him
Can i update this rom as i shows me update.
Perfect, can't wait to use the new MIUI 12 features !
Thank you and keep it up
update? @Sudeep Duhoon
https://androidfilehost.com/?fid=8889791610682915866
mnauman8 said:
Can i update this rom as i shows me update.
Click to expand...
Click to collapse
Don't update using updater app
henloboii said:
Perfect, can't wait to use the new MIUI 12 features !
Thank you and keep it up
Click to expand...
Click to collapse
Thank you for the support
New build will be posted today
Let me know if you face any issues :fingers-crossed:
fr0bs said:
update? @Sudeep Duhoon
https://androidfilehost.com/?fid=8889791610682915866
Click to expand...
Click to collapse
Test build, may not boot
Wait for the OP to get updated
Sudeep Duhoon said:
Don't update using updater app
Test build, may not boot
Wait for the OP to get updated
Click to expand...
Click to collapse
It work beautifully, everything seems to work perfectly, and this new build looks amazing even better than before. Although a little laggy on start up i'm guessing is cause of the super wallpaper. Thanks a bunch,
Found some bugs. connecting the charger while the phone is sleeping glitches the lockscreen and re sets the wallpaper to the homescreen one. after a few seconds it shows the lockscreen wallpaper. flashing magisk or disabling preloaded apps makes the next restart take longer than normal, had to clear caches on twrp, but still took forever to boot up. Charging animation not present. device not certified on playstore. none of these are deal breakers so i don't mind waiting whatever time until they get fixed. i'm keeping this rom cause i love it.
Reboots in fastboot
Hello, my phone always reboots in fastboot mode even after flashing stockboot, I have tried several times and still stuck under fastboot on startup!
Do you have another solution for me?
HELP !!
i've tried all the methodes to install this ROM and not single one works
Method 1:
1- install MIUI 11.0.10 EU Official Firmware using flashtool
2- install TWRP
3- install This ROM after cleaning data and reboot (stuck on fastboot screen)
4- reboot again to TWRP then flashed Stockboot and reboot (stuck on redmi bootloop)
Method 2:
1- Install MIUI 12 Indian Version
2- install this ROM
3- flash stockboot (stuck on redmi bootloop)
Method 3:
1- Flash MIUI 11.0.10
2- wipe data
3- install this ROM
4- install stockboot
stuck on redmi Bootloop screen again
Method 4:
1- Flash This ROM
2- Flash vendor FW 11.0.10
3- Reboot (Stuck on Fastboot Screen)
I Even tried to flash dtbo.img separately and boot.img separately and i found out that the problem in Boot.img file
my best guess is mismatching of boot.img with the version of the ROM
and now im on stock indian miui 12 again
Please Help me installing this wonderful ROM im Just Tired of STOCK FW ones !!!!
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Wallas-Palace said:
i've tried all the methodes to install this ROM and not single one works
Method 1:
1- install MIUI 11.0.10 EU Official Firmware using flashtool
2- install TWRP
3- install This ROM after cleaning data and reboot (stuck on fastboot screen)
4- reboot again to TWRP then flashed Stockboot and reboot (stuck on redmi bootloop)
Method 2:
1- Install MIUI 12 Indian Version
2- install this ROM
3- flash stockboot (stuck on redmi bootloop)
Method 3:
1- Flash MIUI 11.0.10
2- wipe data
3- install this ROM
4- install stockboot
stuck on redmi Bootloop screen again
Method 4:
1- Flash This ROM
2- Flash vendor FW 11.0.10
3- Reboot (Stuck on Fastboot Screen)
I Even tried to flash dtbo.img separately and boot.img separately and i found out that the problem in Boot.img file
my best guess is mismatching of boot.img with the version of the ROM
and now im on stock indian miui 12 again
Please Help me installing this wonderful ROM im Just Tired of STOCK FW ones !!!!
Click to expand...
Click to collapse
Cool
boykioy said:
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Click to expand...
Click to collapse
thank you will try it :good:
Wallas-Palace said:
thank you will try it :good:
Click to expand...
Click to collapse
It worked, thanks
boykioy said:
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Click to expand...
Click to collapse
Never Mind its working thanks alot