Related
Hi all,
I've been playing around lately with this Dual Core Dual Sim device, named Intki E91, with Android 4.0.4, rooted it, then replaced the iPhone iOS style launcher with Samsung's TouchWiz launcher, all fine so far, but then proceeded to wipe all non-useful built-in apps with the help of Uninstall Master 3.2.0, then deleted all Chinese related stuff from the internal memory, at which point the phone resets, no longer boots and I am now stuck in the Android System Recovery 3e with no chance of ever restarting it. Power button + Volume Down takes me to a screen where it says "Enter factory mode" and it just hangs there so one has to remove the battery and then reboot only to get to the stock recovery again.
Now there is no ClockworkMod for this phone and the manufacturer here http://www.intkimobile.com/ did not reply to me when I mailed him about the problem, asking for the factory ROM.
I could only find a find a custom ROM (（E91动力）软件z19b-intki-e91-01_R01_user) on a Chinese website with a "MT6575_Android_scatter" file, but when attempting to flash it with SP Flash Tool 3.1304.0.119 it says Sp Flash Tool Error : 8200, "the load and target are inconsistent", "the load to be downloaded is for MT6575", "the target platform is MT6577_S00".
Afterwards, I looked for a different scatter file for 6577 processors and I found "MT6577_Android_scatter_emmc" file all over the web, then attempted to flash using that, but got the BROM ERROR : S_DA_EMMC_FLASH_NOT_FOUND (3144)
At this point I really do not know what else to attempt to revive this phone, I would really appreciate if someone extracted their stock ROM for this device and post it here as an "update.zip", or give instructions on how to bypass the SP Flash Tool errors, or made a custom recovery for this device so i could flash the above mentioned ROM with no errors, or even develop a custom ROM altogether.
Thanks for your time.
Edit: I flashed a custom recovery using the tutorial here: http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/ but it doesn't work, so now I no longer have a recovery.
My only hope is a solution through Smart Phone Flash Tool.
If only someone could make the errors go away...
The only thing left to do now is to try and format the Flash using SP Flash Tool, an see if that can enable a error-free flashing.
But it's a lot of hassle writing the imei's back afterwards. And if it doesn't work I will have a total brick...
Before proceeding, can someone confirm if formatting the flash fixes the SP Flash Tool errors (especially given its internal memory is a mere 512mb ? - could that be the cause of errors?)
Please advise...
Thanks
im in the same boat as u - struggling to find a working alps iphone 5 rom
hiphone5 MT6573
ushir said:
im in the same boat as u - struggling to find a working alps iphone 5 rom
Click to expand...
Click to collapse
Hello i have a clone hiphone 5 mt6573 and need some help please
can i install any custom roms please help. here's
my phones info
board: Unknown
bootloader: Unknown
brand: Aple
cpu_abi: Armeabi
cpu abi: Unknown
device: konka73_gb
display: alps.gb.fdd2.mp.v2.14
hardward: mt6573
manufacturer: Unknown
model: phone5
product: konka73_gb
Hello everyone, I've been trying to unbrick my ZenFone 2 ZE550ML for at least 5 hours...
(first, the small history...)
I've a french ASUS ZenFone 2 ZE550ML (Z008D) with 2 Go of RAM running latest Lollipop official ROM (I never unlocked bootloader or rooted it)
I suscribed to Asus beta tester program on ZenTalk forum, so I received the Marshmallow upgrade via official OTA last night.
Everything updated normally, I had enough space, update has been completed, I saw the ASUS logo on dark background because it's not unlocked, I saw the message "Optimizing apps..."(ART compiling)... and I successfully booted to Marshmallow... but just one time.
What happened is that my ZenFone 2 is... really... slow... and... with... Marshmallow... it... had... the... same.... slowness... than... with... Lollipop :silly:
And, after playing around with Marshmallow around ten minutes (apps were updating through Play Store), my phone hung, only because of slowness. I could make it sleep (screen turning on/off, that's all, no lock screen), and I could just access to shutdown/reboot menu if I press 3 seconds the Power button. But it was frozen, like it often did in Lollipop.
I waited 15 minutes, because I thought turning off while updating apps like Google Play Services was not a brilliant idea. After 15 minutes of waiting, still frozen, but even more frozen : no power menu, and orange LED was still ON even after disconnecting the charger. I decided to reset my ZenFone 2 by pressing power button 10 seconds.
And... I rebooted it => vibration, then immediately USB logo (when POWER or POWER+UP VOLUME). Nothing more after that. No LED while charging (if I plug it to a charger, it boot loop with USB logo). It's very frustrating because... I saw ASUS logo just before optimization, and I stopped it AFTER update, not during :crying:
(now what I tried)
Today I tried to apply this guide : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I managed to install every driver, I downloaded every file/image I could...
Because of USB logo, my device is always recognized as a Moorefield device with known driver
Following the guide, I sent to my phone the basic 4-coulour bootloader using xFSTK, no problem
Here is the problem now : I've a working fastboot menu, fastboot is recognized by my computer, BUT almost every fastboot command fails, because my serial number was set to 0123456789ABCDEF :crying:
-> Fastboot error is systematically : FAILED (remote: flash_cmds error! (this happens after successfully downloading to phone, but it's not applying)
and, I tried "fastboot erase cache" :
******** Did you mean to fastboot format this partition?
erasing 'cache'...
FAILED (status read failed (Too many links))
I never had any software mess in my phone :crying:
So I don't know what to do, because I would like to flash only splashscreen, recovery and boot if possible, I don't want to lose data
I'm actually downloading a RAW for WW_ZE550ML_2.20.40.149 that I'll sideload with Asus Flash Tool (without wiping data) if it's the only way to do
Where can I find working images for fastboot that can be flashed on a generic serial number?
Thanks for your answers
Edit 1 : OH WAIT... The fastboot screen on my ZenFone 2 Z008 says :
PRODUCT_NAME - Z00A
VARIANT - ASUS_Z00A
WTF ASUS ?!?!?!?!
The ONLY things I did are : OTA update to Marshmallow (I never had OTA issues before) and sending through xFSTK the FW DNx, IFWI and OS Images FOR ZE550ML given in the guide... What happened?! Please please please, can somebody give me the right files? Thank you ^^
(sorry for eventual bad english, I'm a tired french)
Have you tried to re flash fastboot (fastboot flash droidboot.img)?
About the serial number, I think 0123..DEF is normal because I mine is like yours, too. But everything is fine.
fanfan54 said:
Hello everyone, I've been trying to unbrick my ZenFone 2 ZE550ML for at least 5 hours...
(first, the small history...)
I've a french ASUS ZenFone 2 ZE550ML (Z008D) with 2 Go of RAM running latest Lollipop official ROM (I never unlocked bootloader or rooted it)
I suscribed to Asus beta tester program on ZenTalk forum, so I received the Marshmallow upgrade via official OTA last night.
Everything updated normally, I had enough space, update has been completed, I saw the ASUS logo on dark background because it's not unlocked, I saw the message "Optimizing apps..."(ART compiling)... and I successfully booted to Marshmallow... but just one time.
What happened is that my ZenFone 2 is... really... slow... and... with... Marshmallow... it... had... the... same.... slowness... than... with... Lollipop :silly:
And, after playing around with Marshmallow around ten minutes (apps were updating through Play Store), my phone hung, only because of slowness. I could make it sleep (screen turning on/off, that's all, no lock screen), and I could just access to shutdown/reboot menu if I press 3 seconds the Power button. But it was frozen, like it often did in Lollipop.
I waited 15 minutes, because I thought turning off while updating apps like Google Play Services was not a brilliant idea. After 15 minutes of waiting, still frozen, but even more frozen : no power menu, and orange LED was still ON even after disconnecting the charger. I decided to reset my ZenFone 2 by pressing power button 10 seconds.
And... I rebooted it => vibration, then immediately USB logo (when POWER or POWER+UP VOLUME). Nothing more after that. No LED while charging (if I plug it to a charger, it boot loop with USB logo). It's very frustrating because... I saw ASUS logo just before optimization, and I stopped it AFTER update, not during :crying:
(now what I tried)
Today I tried to apply this guide : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I managed to install every driver, I downloaded every file/image I could...
Because of USB logo, my device is always recognized as a Moorefield device with known driver
Following the guide, I sent to my phone the basic 4-coulour bootloader using xFSTK, no problem
Here is the problem now : I've a working fastboot menu, fastboot is recognized by my computer, BUT almost every fastboot command fails, because my serial number was set to 0123456789ABCDEF :crying:
-> Fastboot error is systematically : FAILED (remote: flash_cmds error! (this happens after successfully downloading to phone, but it's not applying)
and, I tried "fastboot erase cache" :
******** Did you mean to fastboot format this partition?
erasing 'cache'...
FAILED (status read failed (Too many links))
I never had any software mess in my phone :crying:
So I don't know what to do, because I would like to flash only splashscreen, recovery and boot if possible, I don't want to lose data
I'm actually downloading a RAW for WW_ZE550ML_2.20.40.149 that I'll sideload with Asus Flash Tool (without wiping data) if it's the only way to do
Where can I find working images for fastboot that can be flashed on a generic serial number?
Thanks for your answers
Edit 1 : OH WAIT... The fastboot screen on my ZenFone 2 Z008 says :
PRODUCT_NAME - Z00A
VARIANT - ASUS_Z00A
WTF ASUS ?!?!?!?!
The ONLY things I did are : OTA update to Marshmallow (I never had OTA issues before) and sending through xFSTK the FW DNx, IFWI and OS Images FOR ZE550ML given in the guide... What happened?! Please please please, can somebody give me the right files? Thank you ^^
(sorry for eventual bad english, I'm a tired french)
Click to expand...
Click to collapse
After flashing Z008 with xFSTK IAW the procedure you tried, the product name in fastboot screen is shown as ASUS_Z00A. After flashing with Asus flashtool, the fastboot screen says correct product number Z008 and corect serial number. :good:
I tried to flash boot.img, droidboot.img, system.img and recovery.img because I did not want to lose my data. Unfortunately, my Z008 did not accept the fastboot commands just like you, so I wiped my data. :crying:
It seems that this guy has succeeded to unbrick Z00A without losing his data. I have not tried this procedure in my Z008 using Z008 raw file yet, so I don't know if this is effective for Z008.
http://forum.xda-developers.com/showpost.php?p=67474121&postcount=210
Serial number restored by Asus Flash Tool, now I can flash with fastboot
Hakataben said:
After flashing Z008 with xFSTK IAW the procedure you tried, the product name in fastboot screen is shown as ASUS_Z00A. After flashing with Asus flashtool, the fastboot screen says correct product number Z008 and corect serial number. :good:
I tried to flash boot.img, droidboot.img, system.img and recovery.img because I did not want to lose my data. Unfortunately, my Z008 did not accept the fastboot commands just like you, so I wiped my data. :crying:
It seems that this guy has succeeded to unbrick Z00A without losing his data. I have not tried this procedure in my Z008 using Z008 raw file yet, so I don't know if this is effective for Z008.
http://forum.xda-developers.com/showpost.php?p=67474121&postcount=210
Click to expand...
Click to collapse
Hello,
Thanks for your answers
I let going Asus Flash Tool for 6 hours, I saw in the Task Manager and on my Zenfone that it used fastboot2 to erase partitions.
Phone said O.K
But it's stuck for 6 hours on a500cgfastboot (these files are here : C:\Program Files (x86)\ASUS\ASUS Flash Tool\Google)
So I think I'll have to reboot phone and PC and retry (I checked integrity of the raw with 7-zip (the raw file is actually a zip file which is unzipped in the folder %USERPROFILE%\.fbrawtempdir) but I'll re-download it...)
Maybe serial number just changed...
Edit after reboot : SO COOL
I discovered that a500cgfastboot was stuck because................................... by erasing some partions, fastboot2 restored the right serial number (I had to restart fastboot to see back my legit serial number)... and it restored product name to Z008
And because a500cgfastboot (and other command ran by Asus Flash Tool) have the old serial 0123456789ABCDEF for argument, a500cgfastboot was no longer finding my phone
I'll retry downloading my img files with fastboot... But I saw Asus Flash Tool cleaned system partition too, but I'll try...
Edit after flashing with fastboot
With the right serial number, everything flashed perfectly with fastboot (but there's one problem : in the Mega folder, there is not the system image for Marshmallow)
so, without system image, my phone boots (ASUS logo, etc...) BUT nothing happens after logo because fastboot2 wiped system :crying: :crying:
I have still access to Fastboot, like before bricking (POWER + VOL UP) (but I can't figure out how to enter in recovery, I've just the droid bot with exclamation mark)
(it's unbricked but no system)
fanfan54 said:
Hello,
Thanks for your answers
I let going Asus Flash Tool for 6 hours, I saw in the Task Manager and on my Zenfone that it used fastboot2 to erase partitions.
Phone said O.K
But it's stuck for 6 hours on a500cgfastboot (these files are here : C:\Program Files (x86)\ASUS\ASUS Flash Tool\Google)
So I think I'll have to reboot phone and PC and retry (I checked integrity of the raw with 7-zip (the raw file is actually a zip file which is unzipped in the folder %USERPROFILE%\.fbrawtempdir) but I'll re-download it...)
Maybe serial number just changed...
Edit after reboot : SO COOL
I discovered that a500cgfastboot was stuck because................................... by erasing some partions, fastboot2 restored the right serial number (I had to restart fastboot to see back my legit serial number)... and it restored product name to Z008
And because a500cgfastboot (and other command ran by Asus Flash Tool) have the old serial 0123456789ABCDEF for argument, a500cgfastboot was no longer finding my phone
I'll retry downloading my img files with fastboot... But I saw Asus Flash Tool cleaned system partition too, but I'll try...
Edit after flashing with fastboot
With the right serial number, everything flashed perfectly with fastboot (but there's one problem : in the Mega folder, there is not the system image for Marshmallow)
so, without system image, my phone boots (ASUS logo, etc...) BUT nothing happens after logo because fastboot2 wiped system :crying: :crying:
I have still access to Fastboot, like before bricking (POWER + VOL UP) (but I can't figure out how to enter in recovery, I've just the droid bot with exclamation mark)
(it's unbricked but no system)
Click to expand...
Click to collapse
If you want to use Marshmallow, I recommend to flash pre-rooted lollipop first, then to flash marshmallow. In your situation, you should unbrick your Z008 at first. After that, you can change system to Marshmallow easily.
Pre-rooted Z008 systems are here. http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
In my case, I needed to have rooted and bootloader-unlocked again to enter in recovery.
Yay!
ASUS Flash Tool flashed the 2.20.40.149 successfully
It's saying "Optimizing app 45 of 119", but I think I had 179 when upgrading to Marshmallow...
And my Android was in french before. But I think I'll be able to fix this
I'll check soon if I've still all my data and apps...
(also, I tried to film everything, if it works I could eventually upload a video tutorial )
Thanks
Another problem... Edit 1
Android boots, I haven't any installation "Welcome" popup because I did not reset it, but as a consequence it crashes at start :
"Unfortunately, android.process.media stopped"
"Unfortunately, android.process.acore stopped"
And it reboots
Maybe it's because these are Marshmallow apps... Will I have to reset it?
Or where can I find system.img for Marshmallow?
Edit 2 Just managed to access to recovery menu
Definitely solved
Solved without losing any data (except settings of some non-system apps)
Hello,
I found on ZenTalk (this thread : http://www.asus.com/zentalk/forum.php?mod=redirect&goto=findpost&ptid=78184&pid=392686) a working link to Latest Marshmallow sideload zip for ZE550ML OR ZE551ML. It was the right file, finally.
ZF2/ZE550ML/Z008/Android 6.0.1/WW-4.21.40.54 ~ download --> here.
ZF2/ZE551ML/Z00A/Android 6.0.1/WW-4.21.40.61 ~ download --> here.
Click to expand...
Click to collapse
I sideloaded this file using adb and recovery mode, it worked PER-FECT-LY : my phone just rebooted without any problem, like before the problem. And with latest Marshmallow obviously : I immediately received messages, could access to my pictures, apps, with the same settings than before, in French (just one thing: settings for some non-system apps are reset)
Here is guide of everything I did to unbrick a Marshmallow ZE550ML stuck on USB logo with no bootloader :
(Note: I recommend you to charge your ZenFone for a few hours as soon as you'll get fastboot menu at step 1, so it will not shutdown... Even if it's not turning on the orange LED, it's charging )
(Note also that these are the steps I had to do in order to unbrick MY phone without losing data and installing Marshmallow. For your phone some steps might be unnecessary, if you're lucky... I know this is a very long guide but I had to do this in MY case)
1. Flash basic bootloader with xFSTK Downloader to boot fastboot
I had, first, to switch to advanced startup with support for unsigned drivers (video tutorial here),
install Asus USB drivers (link to Asus USB drivers here - note: video tutorial to install drivers from inf (repeat for every device available : ADB Interface, Bootloader Interface, etc...) )
and IntelSocUSB driver (link to IntelSocUSB driver 1.2.0 - Note: Before finishing IntelSocUSB setup it will ask you to configure a device : you'll have to connect your ZenFone 2 using an USB cable to your computer, while it's displaying USB logo, and WAIT FOR DETECTION IN Device Manager as "Moorefield device" under "Intel Soc" section),
to flash a fastboot bootloader (link to xFSTK_ZE550ML-sal358-amtech.vn for ZE550ML / link to xFSTK_ZE551ML-sal358-amtech.vn for ZE551ML) using xFSTK Downloader (link to xFSTK Downloader 1.7.0) [B
(guides for everything in this step 1: english version - same in vietnamese with screenshots and valid links - detailed PDF for xFSTK with screenshots).[/B] => phone boots on fastboot
2. Flash a lollipop ROM (or Marshmallow raw if you find it) with Asus Flash Tool to repair fastboot info (like serial number) and access recovery if you want to install Marshmallow from a zip
In order to get a working recovery menu (because I found a zip for Marshmallow but no raw, I'll have to install a recovery),
I had to install Asus Flash Tool (link to Asus Flash Tool 1.14 - Note: archive password is www.asus-zenfone.com ),
flash a Lollipop raw (link to WW_ZE550ML_2.20.40.149.raw) on my ZenFone 2 ZE550ML using Asus Flash Tool (Model: ZE550ML - wipe data : no)
(guides for everything in this step 2: english version - same in vietnamese with screenshots and valid links)
BUT because Asus Flash Tool will wipe everything except user data and change your serial number from 0123456789ABCDEF to your legit serial number, flashing will NOT work and process will be ENDLESS because serial number has changed so phone is not found and you're not warned of that by Asus Flash Tool.
After 20 minutes of "OKAY" status displayed in green text on your phone, after 20 minutes of "a500cgfastboot.exe" running in task manager,
I think you can safely unplug USB cable, abort Asus Flash Tool by closing this software, killing "a500cgfastboot.exe",
rebooting phone (notice serial number change in fastboot info on phone's screen) and flash again with same settings but the new serial number (different of 0123456789ABCDEF).
This flash should work, after an hour or less you'll see in Asus Flash Tool that it's finished.
3. Flash Marshmallow zip with adb sideload
Finally, you'll have to shut down your phone,
boot in recovery mode (guide is here),
connect it to computer, select "apply update from adb",
install adb (link to ADB Installer 1.4.3 - Note: install it system-wide but don't install Android USB drivers) on your computer,
download zip OTA for Marshmallow (link to UL-Z008-WW-4.21.40.54-user.zip for ZE550ML / link to UL-Z00A-WW-4.21.40.61-user.zip for ZE551ML),
open a command prompt in the folder where you downloaded files (using "File > Open command prompt > Open command prompt" in the Windows Explorer's ribbon), then type :
Code:
adb devices
to verify that your phone is detected (you should see your serial number in cmd),
then type the following command to flash Marshmallow stock (zip is NOT pre-rooted if you want to root you'll have to do it after) :
ZE550ML
Code:
adb sideload UL-Z008-WW-4.21.40.54-user.zip
ZE551ML
Code:
adb sideload UL-Z00A-WW-4.21.40.61-user.zip
It may take a while decompressing then sending to phone. Then select "wipe cache partition" in your recovery menu,
wait until you see again the menu (so, wait until end of wiping cache), and select "reboot").
Now pray, and your device should magically boot the latest beautiful stock Marshmallow ROM from Asus, with all your data, exactly like before you bricked it.
It worked for me, but with the right new images it should work perfectly for you...
Enjoy this small guide, I hope you'll appreciate hard googling work
Thank you all, my problem is solved
fanfan54 said:
Solved without losing any data (except settings of some non-system apps)
Hello,
I found on ZenTalk (this thread : http://www.asus.com/zentalk/forum.php?mod=redirect&goto=findpost&ptid=78184&pid=392686) a working link to Latest Marshmallow sideload zip for ZE550ML OR ZE551ML. It was the right file, finally.
I sideloaded this file using adb and recovery mode, it worked PER-FECT-LY : my phone just rebooted without any problem, like before the problem. And with latest Marshmallow obviously : I immediately received messages, could access to my pictures, apps, with the same settings than before, in French (just one thing: settings for some non-system apps are reset)
Here is guide of everything I did to unbrick a Marshmallow ZE550ML stuck on USB logo with no bootloader :
(Note: I recommend you to charge your ZenFone for a few hours as soon as you'll get fastboot menu at step 1, so it will not shutdown... Even if it's not turning on the orange LED, it's charging )
(Note also that these are the steps I had to do in order to unbrick MY phone without losing data and installing Marshmallow. For your phone some steps might be unnecessary, if you're lucky... I know this is a very long guide but I had to do this in MY case)
1. Flash basic bootloader with xFSTK Downloader to boot fastboot
I had, first, to switch to advanced startup with support for unsigned drivers (video tutorial here),
install Asus USB drivers (link to Asus USB drivers here - note: video tutorial to install drivers from inf (repeat for every device available : ADB Interface, Bootloader Interface, etc...) )
and IntelSocUSB driver (link to IntelSocUSB driver 1.2.0 - Note: Before finishing IntelSocUSB setup it will ask you to configure a device : you'll have to connect your ZenFone 2 using an USB cable to your computer, while it's displaying USB logo, and WAIT FOR DETECTION IN Device Manager as "Moorefield device" under "Intel Soc" section),
to flash a fastboot bootloader (link to xFSTK_ZE550ML-sal358-amtech.vn for ZE550ML / link to xFSTK_ZE551ML-sal358-amtech.vn for ZE551ML) using xFSTK Downloader (link to xFSTK Downloader 1.7.0) [B
(guides for everything in this step 1: english version - same in vietnamese with screenshots and valid links - detailed PDF for xFSTK with screenshots).[/B] => phone boots on fastboot
2. Flash a lollipop ROM (or Marshmallow raw if you find it) with Asus Flash Tool to repair fastboot info (like serial number) and access recovery if you want to install Marshmallow from a zip
In order to get a working recovery menu (because I found a zip for Marshmallow but no raw, I'll have to install a recovery),
I had to install Asus Flash Tool (link to Asus Flash Tool 1.14 - Note: archive password is www.asus-zenfone.com ),
flash a Lollipop raw (link to WW_ZE550ML_2.20.40.149.raw) on my ZenFone 2 ZE550ML using Asus Flash Tool (Model: ZE550ML - wipe data : no)
(guides for everything in this step 2: english version - same in vietnamese with screenshots and valid links)
BUT because Asus Flash Tool will wipe everything except user data and change your serial number from 0123456789ABCDEF to your legit serial number, flashing will NOT work and process will be ENDLESS because serial number has changed so phone is not found and you're not warned of that by Asus Flash Tool.
After 20 minutes of "OKAY" status displayed in green text on your phone, after 20 minutes of "a500cgfastboot.exe" running in task manager,
I think you can safely unplug USB cable, abort Asus Flash Tool by closing this software, killing "a500cgfastboot.exe",
rebooting phone (notice serial number change in fastboot info on phone's screen) and flash again with same settings but the new serial number (different of 0123456789ABCDEF).
This flash should work, after an hour or less you'll see in Asus Flash Tool that it's finished.
3. Flash Marshmallow zip with adb sideload
Finally, you'll have to shut down your phone,
boot in recovery mode (guide is here),
connect it to computer, select "apply update from adb",
install adb (link to ADB Installer 1.4.3 - Note: install it system-wide but don't install Android USB drivers) on your computer,
download zip OTA for Marshmallow (link to UL-Z008-WW-4.21.40.54-user.zip for ZE550ML / link to UL-Z00A-WW-4.21.40.61-user.zip for ZE551ML),
open a command prompt in the folder where you downloaded files (using "File > Open command prompt > Open command prompt" in the Windows Explorer's ribbon), then type :
Code:
adb devices
to verify that your phone is detected (you should see your serial number in cmd),
then type the following command to flash Marshmallow stock (zip is NOT pre-rooted if you want to root you'll have to do it after) :
ZE550ML
Code:
adb sideload UL-Z008-WW-4.21.40.54-user.zip
ZE551ML
Code:
adb sideload UL-Z00A-WW-4.21.40.61-user.zip
It may take a while decompressing then sending to phone. Then select "wipe cache partition" in your recovery menu,
wait until you see again the menu (so, wait until end of wiping cache), and select "reboot").
Now pray, and your device should magically boot the latest beautiful stock Marshmallow ROM from Asus, with all your data, exactly like before you bricked it.
It worked for me, but with the right new images it should work perfectly for you...
Enjoy this small guide, I hope you'll appreciate hard googling work
Thank you all, my problem is solved
Click to expand...
Click to collapse
Man, Today you saved my life and my phone's life . I had exact same problem like yours and I have tried everything to bring my phone back to life last a few days. Today I just noticed your post and it solved my problem perfectly. Thanks man ,really appreciate it ..
muhammed cy said:
Man, Today you saved my life and my phone's life . I had exact same problem like yours and I have tried everything to bring my phone back to life last a few days. Today I just noticed your post and it solved my problem perfectly. Thanks man ,really appreciate it ..
Click to expand...
Click to collapse
Hello,
Thanks for your great feedback muhammed!
Have a nice day!
help me
fanfan54 said:
Hello,
Thanks for your great feedback muhammed!
Have a nice day!
Click to expand...
Click to collapse
please share to my email link WW_ZE550ML_2.20.40.149.raw
[email protected]
tanks before
iwakpauz said:
please share to my email link WW_ZE550ML_2.20.40.149.raw
[email protected]
tanks before
Click to expand...
Click to collapse
Hello, I already sent it to you by email. Here is the link : https://yadi.sk/d/XAUyR8eRtuKdA
Hello,
Sorry for reviving this thread, but I found myself in the same situation. I followed every step, and it works flawlessly. However, after flashing the stock Marshmallow ROM, unlocking the bootloader, flashing TWRP and reinstalling the stock ROM through there, it always bricks my phone (it's the ZE551ML, by the way), so I can't root my device at all. I wonder if anyone has any way of solving this?
I also found that, after unlocking the bootloader, the serial number appears as 0123456789ABCDEF again. I'm pretty much stuck on the stock ROM at this point, with no way of rooting it at all. I can't flash SuperSU through the stock recovery either, it gives me the "signature verification failed" error.
Thanks a lot in advance.
ayuinaba said:
Hello,
Sorry for reviving this thread, but I found myself in the same situation. I followed every step, and it works flawlessly. However, after flashing the stock Marshmallow ROM, unlocking the bootloader, flashing TWRP and reinstalling the stock ROM through there, it always bricks my phone (it's the ZE551ML, by the way), so I can't root my device at all. I wonder if anyone has any way of solving this?
I also found that, after unlocking the bootloader, the serial number appears as 0123456789ABCDEF again. I'm pretty much stuck on the stock ROM at this point, with no way of rooting it at all. I can't flash SuperSU through the stock recovery either, it gives me the "signature verification failed" error.
Thanks a lot in advance.
Click to expand...
Click to collapse
Hello , Firstly , although not clear when you say > "flashing TWRP and reinstalling the stock ROM through there"
1) You can only back up stock rom and restore from TWRP - you cannot flash stock rom from TWRP .
2) Were you bricked and used xFSTK at some point and did you correct serial before upgrading to M ?
signature failed is normal after unlocking bootloader :good:
timbernot said:
Hello , Firstly , although not clear when you say > "flashing TWRP and reinstalling the stock ROM through there"
1) You can only back up stock rom and restore from TWRP - you cannot flash stock rom from TWRP .
2) Were you bricked and used xFSTK at some point and did you correct serial before upgrading to M ?
signature failed is normal after unlocking bootloader :good:
Click to expand...
Click to collapse
Hello, and thank you for the reply!
I'm rather new to this, so I apologize for the possible incorrect terms... I'll try to describe everything as detailed as possible:
My device got bricked, and I sought a solution for it, thus arriving at this thread.
I did every step the OP described to unbrick the device, using xFSTK, *except* rebooting the device after the first flash with ASUS Flash Tool (because when I did, it'd become unresponsive, so I used the flash tool a second time without rebooting and it recovered my serial number).
Next, I went to recovery and installed the Lollipop .zip through adb sideload.
Afterwards, I installed the Marshmallow .zip through adb sideload again.
It's working great this way, but I wanted to root it, so I rebooted into bootloader, and tried to "fastboot boot twrp.img" with no success.
After reading a few more threads, I figured I had to unlock the bootloader before being able to boot into twrp, so I used the bootloader unlocker.
After unlocking it, I was unable to boot into anything but the bootloader (which I presume is normal), so I tried to boot into twrp through fastboot with no success - I had to use "fastboot flash recovery twrp.img" for it to work.
I went into recovery mode, and twrp launched. Since I presumed I had to install Marshmallow from there, due to unlocking the bootloader, I did - through "install .zip".
And after doing that and rebooting the system, it became unresponsive again, - bricked: black screen, only vibrates - thus returning to its initial state.
ayuinaba said:
Hello, and thank you for the reply!
I'm rather new to this, so I apologize for the possible incorrect terms... I'll try to describe everything as detailed as possible:
My device got bricked, and I sought a solution for it, thus arriving at this thread.
I did every step the OP described to unbrick the device, using xFSTK, *except* rebooting the device after the first flash with ASUS Flash Tool (because when I did, it'd become unresponsive, so I used the flash tool a second time without rebooting and it recovered my serial number).
Next, I went to recovery and installed the Lollipop .zip through adb sideload.
Afterwards, I installed the Marshmallow .zip through adb sideload again.
It's working great this way, but I wanted to root it, so I rebooted into bootloader, and tried to "fastboot boot twrp.img" with no success.
After reading a few more threads, I figured I had to unlock the bootloader before being able to boot into twrp, so I used the bootloader unlocker.
After unlocking it, I was unable to boot into anything but the bootloader (which I presume is normal), so I tried to boot into twrp through fastboot with no success - I had to use "fastboot flash recovery twrp.img" for it to work.
I went into recovery mode, and twrp launched. Since I presumed I had to install Marshmallow from there, due to unlocking the bootloader, I did - through "install .zip".
And after doing that and rebooting the system, it became unresponsive again, - bricked: black screen, only vibrates - thus returning to its initial state.
Click to expand...
Click to collapse
Hi again , yes you did everything right up to a point .
You will have to use xFSTK again , flash in aft after till you see ` RESULT = OK ` after a couple of minutes into flash (serial will be incorrect here) ...
Close aft - force close it - keep phone connected through-out -- do not dislodge data cable--- set everything back up in aft again -- then press vol+ once --- your serial will be corrected -- start the flash and let it finish , it will boot into the system related to the raw you flashed.
upgrade like before BUT when in M , use giovix`s Modder tool to unlock bootloader flash, twrp and root etc.
You will be fine ,just remember to back-up stock rom in TWRP first before installing custom LineageOS ,so you can use` return to stock option ` in modder tool after restoring your stock back-up -- to install future updates :good:
timbernot said:
Hi again , yes you did everything right up to a point .
You will have to use xFSTK again , flash in aft after till you see ` RESULT = OK ` after a couple of minutes into flash (serial will be incorrect here) ...
Close aft - force close it - keep phone connected through-out -- do not dislodge data cable--- set everything back up in aft again -- then press vol+ once --- your serial will be corrected -- start the flash and let it finish , it will boot into the system related to the raw you flashed.
upgrade like before BUT when in M , use giovix`s Modder tool to unlock bootloader flash, twrp and root etc.
You will be fine ,just remember to back-up stock rom in TWRP first before installing custom LineageOS ,so you can use` return to stock option ` in modder tool after restoring your stock back-up -- to install future updates :good:
Click to expand...
Click to collapse
Did everything as you told me, but now whenever I "reboot to system", it boots into recovery every time... :\
To clarify, I used the command "fastboot flash recovery twrp_z00a_v24_repack.img", and then installed the latest .zip of SuperSU in TWRP (Install -> SuperSU.zip).
EDIT: Sorry, I mistook Giovix's bootloader unlocker for their full modder tool, I'll be trying that now.
EDIT 2: You saved my butt! Thank you so much for your help, I managed to succeed in everything, finally!
ayuinaba said:
Did everything as you told me, but now whenever I "reboot to system", it boots into recovery every time... :\
To clarify, I used the command "fastboot flash recovery twrp_z00a_v24_repack.img", and then installed the latest .zip of SuperSU in TWRP (Install -> SuperSU.zip).
EDIT: Sorry, I mistook Giovix's bootloader unlocker for their full modder tool, I'll be trying that now.
EDIT 2: You saved my butt! Thank you so much for your help, I managed to succeed in everything, finally!
Click to expand...
Click to collapse
Marvelous stuff. ,its been a pleasure helping you
Happy flashing
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
PS, should see the lengths some people go to restore serial
Why ? Lol When it
Only takes 3 mins max this way
Guys: I need your understanding, experience, patience and HEEELP!!!
The history:
2 months ago, I bought a new HUAWEI GR3 (TANGO) TAG-L23. Processor = MT6753T
I tried to root it using KingoRoot. I Messed it up... Got a soft-brick: splash screen boot loop. At that moment, I still had access to Fastboot and Recovery mode (stock recovery).
After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3.
I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm.
Tired of searching a stock/custom firmware for GR3 TAG-L23, I decided to download and flash a GR3 TAG-L22 rom using TWRP.
Result = Messed it up again... this time worst... Hard-bricked I think: the phone didn't show any light, couldn't boot it again in any mode... Dead...
The only hope I had is that it is detected by Windows for about 10 seconds as MEDIATEK USB PORT (COMxx) where xx changes when I connect it from one USB port to another.
Since then, I tried almost every tutorial/video/solution/forum/website over the internet, tried almost every SP Flash tool version from v3.1224 to v5.1628, downloaded every scatter.txt for MT6753 processor, tried changing with/without battery option in SPFT, pressing every phone buttons combos, with no luck...
I always get the same error: S_FT_ENABLE_DRAM_FAIL (0xFC0)
Downloaded and installed almost every driver I found on internet: not overwritting them... I created a Virtual Machine, and test them separately using snapshots. Result = Same DRAM_FAIL error.
last week, got another HUAWEI GR3 TAG-L23, untouched, brand new...
I did the following with the new one:
Flashed TWRP recovery using fastboot commands = OK
Rooted it using SuperSU = OK
executed tons of ADB commands that found over the internet, to dump the partition table and stock rom using dd command = OK (I think... what I got is a bunch of files - system, lk, boot, logo, cache, frp, userdata, secro, recovery, nvdata, protect1 and 2, tee1 and 2, and so on).
Using the partition table information, edited one scatter.txt file for MT6753 and, one by one, adjusted the partition info (start and lenght). I did it because when using any downloaded scatter file, and selecting the files that I got from dd commands, SPFT showed error messages saying them were wrong. After editing it and loading the files that I got from the second phone, SPFT recognized them as good ones.
But.... I'm still getting the d...mn S_FT_ENABLE_DRAM_FAIL (0xFC0) error
Also tried to get a rom backup and scatter file from the second phone using MTK DROID ROOT & TOOLS v2.5.3 with no luck: it shows all phone information (except IMEIs), a green rectangle shows up, but... a weird message appears at right: "ERROR: TotalBytesPerChunk Not Found. Set Default Page/Spare=2048/64 !!!". Then I click on "BLOCKS MAP" button, a new window appears showing the partition info (that already got using adb command prompt) and "create scatter file" button is grayed out... And if I try to perform the backup, it starts fine, but ends with error, and no file is backed up...
Let me mention that I already read and googled the totalbytesperchunk error and the grayed out button stuff and tried all alternatives too, and nothing worked.
My work environment:
PC = Laptop With 8 GB RAM / Windows 10 pro x64
Virtual Machines: Windows 7 pro 32 bits, Windows XP 32 bits, Ubuntu 32 and 64 bits...
What else can I do?
How can I use the second, rooted and working phone to get a rom/firmware working dump? it is possible?
If someone decides to help me, let me know what do you need (dumped files, downloaded scatter.txt files, screenshots, whatever you need...)
COM## is a COM port. You can use a terminal program to directly interact with the device.
You are not completely bricked yet.
I do not have any further details to help you, but I can tell you there is still hope.
Connect the dead device to PC, load up a terminal app (if on windows, just load up the app named Terminal)
See where you can get with that.
good luck
Please Help cesarr4: my TAG-L23 bricked - Need your TWRP
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
antonioroa said:
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
Click to expand...
Click to collapse
I attached the recovery I'm currently using in the second GR3. I'm still looking forward the stock rom and a way to recover the first one... have u found a way to unbrick it?
Here you can find the recovery too: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-huawei-tag-l01-p8-t3433520
I have the same problem with kingroot, and cannot find TAG-L23 rom.
I sent my phone to huawei support and they said it's a board problem and need to replace, the cost is near to the phone's original price.... No way!
In clangsm web page there's a stock rom but you need to pay for vip membership.
Please help with this issue.
I'm still trying to get a working rom image from the 2nd GR3 that I bought... No luck yet... I'm plenty sure that there is no need to do hardware replacement... can anyone point me to a tool/step-by-step guide to readback and save a flashable rom image from GR3 phone, and a SP tools that works with GR3 chipset/PCB?
Hi, i have a TAG-L01 and i got the same problem, i've tried a lot with no lucky, it seems sp flash tool don't support our device(or is huawei that don't want).
If you have some ideas please tell me, i will help(our devices are exactly the same, all TAG-Lxx are the same)
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
srgg01 said:
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
Click to expand...
Click to collapse
Done. Where can I share it for you?
cesarr4 said:
Done. Where can I share it for you?
Click to expand...
Click to collapse
please share your ROM in google drive. i've got same problem here.
Any link to the TAG-L23 ROM? please share as I believe mine is corrupted.
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
Hey there, so I was playing a game PubG in which in the middle of a match the screen got stuck. I waited for 10 mins for it to go back and tried locking the screen with power button but nothing happened. When I long pressed it closed for a second then restarted and got stuck on bootscreen with only mi logo and no animation. Now it isn't switching off it gets rebooted to the same screen again. Only fastboot is opening. I don't want to lose my personal data there photos, videos that includes all my college life. If I try to flash it I think I will lose all data. Also I didnt backup all the data on mi cloud or anywhere. Please help me.
Also in flashing if I select the option 'save user data' will my data be saved?
same issue
same issue
happened to me just now
should be common software/update issue
Is your bootloader unlocked?
If you only want to back up your music, photos,videos,documents etc. , flash twrp recovery then boot into it (power+vol up about 11s). Connect your phone to PC. Then copy all data you need to save. Then reboot to fastboot and do a clean flash (clean all).
If you either want to back up the application data, do the previous operation without flashing first, and then do a "dirty" flash (save user data). At this time, your phone should be able to boot, use the BACKUP app to back up all your application data and copy it to your computer. The backup file seems to be stored in /storage/emulated/ 0/MIUI/backup, I don't remember it well.
After backing up all data you needed to save, you'd better do a clean flash using fastboot method. Make sure you choose "clean all".
Yuki1001 said:
Is your bootloader unlocked?
If you only want to back up your music, photos,videos,documents etc. , flash twrp recovery then boot into it (power+vol up about 11s). Connect your phone to PC. Then copy all data you need to save. Then reboot to fastboot and do a clean flash (clean all).
If you either want to back up the application data, do the previous operation without flashing first, and then do a "dirty" flash (save user data). At this time, your phone should be able to boot, use the BACKUP app to back up all your application data and copy it to your computer. The backup file seems to be stored in /storage/emulated/ 0/MIUI/backup, I don't remember it well.
After backing up all data you needed to save, you'd better do a clean flash using fastboot method. Make sure you choose "clean all".
Click to expand...
Click to collapse
Thanks for replyling. I think my bootloader is not unlocked. Also power+vol up is not working, only power+vol down is working. Can I flash twrp with bootloader locked?
Arun pm said:
same issue
happened to me just now
should be common software/update issue
Click to expand...
Click to collapse
So what did you do? Please tell me the method if you were able to solve it.
Re: Prakharpathak
I'm sorry because I can't save a phone that have a locked bootloader. If you wish to try Qualcomm QDLoader9008, maybe it will not work. Xiaomi has locked the 9008 port for their phones. Unless you have an authorized Mi account to get the verify token and send the authentitation tag to your phone, or the phone will reject all flashing commands. QPST is not working. The only difference is that the bootloader can be unlocked, but the 9008 requires authorization every time.
If you want to try the force unlock bootloader tool, once the force unlock is successful, you will lose all your data. Unless you can erase the recovery partition before the bootloader send a wipe command to Mi-recovery. In other words, if the recovery partition is erased or the recovery is not stock recovery (like twrp, etc) , unlocking the bootoader will not lose any data. Twrp does not accept the wipe command from the bootloader.
[edit]Now we have working firehose programmer could be used. Use QFIL to dump your userdata.
Yuki1001 said:
Re: Prakharpathak
I'm sorry because I can't save a phone that have a locked bootloader. If you wish to try Qualcomm QDLoader9008, maybe it will not work. Xiaomi has locked the 9008 port for their phones. Unless you have an authorized Mi account to get the verify token and send the authentitation tag to your phone, or the phone will reject all flashing commands. QPST is not working. The only difference is that the bootloader can be unlocked, but the 9008 requires authorization every time.
If you want to try the force unlock bootloader tool, once the force unlock is successful, you will lose all your data. Unless you can erase the recovery partition before the bootloader send a wipe command to Mi-recovery. In other words, if the recovery partition is erased or the recovery is not stock recovery (like twrp, etc) , unlocking the bootoader will not lose any data. Twrp does not accept the wipe command from the bootloader.
Click to expand...
Click to collapse
my bootloader is locked but i am ready to lose all my data , can you please tell me how can i boot my device
Re: @jagannath287
If this is also useful for you @Prakharpathak , you can also try.
If you are ready to lose all your data, you can try to use Mi PC Suite. Offical link of MI PC SUITE:
http://pcsuite.mi.com
You must be able to boot into Mi-Recovery, otherwise my solution will not help you.
Download the recovery ROM for your phone. Note that you can't upgrade or downgrade the OS version using this method.
After downloading and installing the Mi PC Assistant application on your computer, run it and login to your MI account. Then select FLASH ROM section and connect your device to your PC. Make sure your device is booted into Mi-recovery and selected “Connect with MiAssistant”.
Warning: you can't downgrade/change ROM region (you can only install the same area version to your phone, like MI-MI, RU-RU, EEA-EEA, etc) using this method.
Make a full wipe for your phone and select the RECOVERY ROM package: fast update and agree with full wipe. Then wait for the data erasing is fully done. After you see “Checking zip file update” and if all ok, the flashing progress will start and you will see the flashing is in progress. At last, you will see the window with successfully flashing. In theory, the phone will reboot to system automatically. The first start will take about 10 minutes. Be patient and wait the welcome screen.
There is another MI PC SUITE version that I found and I attach with my post. There is also a XiaomiADB flashing program.
Alternative method:
Download the adb driver and install it on your computer. Use the XiaomiADB full-auto flash program to flash your phone.
Select “Connect with MIAssistant” in the recovery and connect the phone to PC.
Make sure the recovery ROM zip file and XiaomiADB flashing program that in same folder. For start flashing just HOLD zip ROM AND DRUG IT TO THE XiaomiADB. After this command your DATA will be reset! You lost all files and Settings on your device.
At last, I suggest you to unlock the bootloader for your phone as soon as possible and flash your phone using MiFlash in fastboot mode in order to avoid facing mysterious bugs. A phone that have an unlocked bootloader is easy to save (unbrick) or backup all data from the phone without booting into system.
Attachment:
1.XiaomiADB:
https://drive.google.com/open?id=1BIlCd5wFFFlU2ObIQ-AtBNp3jlSj_5L1
2.MI PC SUITE 4.0 Beta:
https://drive.google.com/open?id=1_QoNlQFVj7lPo5iqM8jdrNmRwPztHQbV
If you find it useful, please click thanks.
I have an unlocked bootloader with latest stock rom
Stuck at MI logo
>No stock recovery loading
>Unfortunately the usb debugging is off (Automatically by MI security app :crying
>Tried Mi flash, Fastboot, Qualcomm Qflash with test point connection
>Is there anything left to try
Thanks
Re: @Arun pm
Xiaomi has locked the 9008 port for their devices.
Can you flash and boot into TWRP recovery?
Can your phone boots into fastboot?
Did you try to flash every partition manually?
Did you try to flash the oldest version--V9.5.19?
More information needed. It can save time and guesswork.
Yuki1001 said:
Re: @Arun pm
Thanks for the reply bro
Xiaomi has locked the 9008 port for their devices.
Can you flash and boot into TWRP recovery?
>> tried failed; stuck at the twrp logo(tried multiple versions and built)
Can your phone boots into fastboot? :
>>yes, but cant flash, permission error (usb debugging is off)
Did you try to flash every partition manually?
>>yes, even tried it with qualcomm tools but failed
Did you try to flash the oldest version--V9.5.19?
>>yes : same
More information needed. It can save time and guesswork.
Click to expand...
Click to collapse
Thanks for the reply bro
Xiaomi has locked the 9008 port for their devices.
Can you flash and boot into TWRP recovery?
>> tried failed; stuck at the twrp logo(tried multiple versions and built)
Can your phone boots into fastboot? :
>>yes, but cant flash, permission error (usb debugging is off)
Did you try to flash every partition manually?
>>yes, even tried it with qualcomm tools but failed
Did you try to flash the oldest version--V9.5.19?
>>yes : same
More information needed. It can save time and guesswork.
Re: @Arun pm
You'd better create a new thread otherwise we will disturb the original author of this thread (Prakharpathak).
Did you mean the returned message from your phone is like this:
Sending "recovery"...
OKAY. Total time: 4.016s
Writing "recovery"...
FAILED<remote: Permission Error>
finished. Total time: 4.016s
In theory, the fastboot won't return this message and the USB debugging switch has no relation with fastboot flashing.
All partitions can't be flashed and return the "permission error" message?
Can you take a photo of the flashing error message?
[edit] Now we have working programmer and you could do all you want via EDL.
Yuki1001 said:
Re: @Arun pm
You'd better create a new thread otherwise we will disturb the original author of this thread (Prakharpathak).
Did you mean the returned message from your phone is like this:
Sending "recovery"...
OKAY. Total time: 4.016s
Writing "recovery"...
FAILED<remote: Permission Error>
finished. Total time: 4.016s
In theory, the fastboot won't return this message and the USB debugging switch has no relation with fastboot flashing.
All partitions can't be flashed and return the "permission error" message?
Can you take a photo of the flashing error message?
Click to expand...
Click to collapse
I am currently facing a similar situation.
My device redmi note 5 pro was running on miui 11 and suddenly its screen froze and then it got restarted and stuck at mi logo. It has locked bootloader and I can't access the stock recovery but I can access fastboot mode. I tried flashing different miui versions with different flash tools and everytime the process starts then after 9 seconds I get the error "ack count doesn't match". I tried flashing with edl point method as well and with a patched firehose file to bypass mi authentication but still got the same error. Can you please help me? I searched around the net and I can't find anything related to this particular error I am getting. I would really appreciate if you can help.
oh god same issue its not booting, checked with service centre not able to update software, one of the mobile shop guy told that mobile mother board working fine but unable to locate software so that it can boot, now i am blank and helpless can you guys help me out please.. if people in chennai here let me know guys.. its been 5 th day without my mobile...
Hi,
I got similar issue. I had installed GFX tool for cod on redmi note 5 pro and got hang on call of duty mobile. After long press power button, got stuck at mi boot logo. Only able to do connect phone in fastboot to PC. Anybody found solution? I want to back up all data excluding apps. Kindly suggest working solutions.
Deep3004 said:
Hi,
I got similar issue. I had installed GFX tool for cod on redmi note 5 pro and got hang on call of duty mobile. After long press power button, got stuck at mi boot logo. Only able to do connect phone in fastboot to PC. Anybody found solution? I want to back up all data excluding apps. Kindly suggest working solutions.
Click to expand...
Click to collapse
Flash orangefox recovery, then boot to recovery and there you can disable all the apps you want
kadyt said:
Flash orangefox recovery, then boot to recovery and there you can disable all the apps you want
Click to expand...
Click to collapse
Thanks for reply.
I tried to flash orange fox recovery but bootloader is locked and no fastboot commands working. I have tried mi unlock flash tool to unlock bootloader but error is comming "couldn't unlock more devices by this account this month" on official tool and on unofficial tool error is "current account is not bounded to this device". I cannot add device to this account since phone is into bootloop and wanted to save data. Is there any way to unlock bootloader and get access to storage data?
Deep3004 said:
Thanks for reply.
I tried to flash orange fox recovery but bootloader is locked and no fastboot commands working. I have tried mi unlock flash tool to unlock bootloader but error is comming "couldn't unlock more devices by this account this month" on official tool and on unofficial tool error is "current account is not bounded to this device". I cannot add device to this account since phone is into bootloop and wanted to save data. Is there any way to unlock bootloader and get access to storage data?
Click to expand...
Click to collapse
Sorry I took for granted that you had the bootloader unlocked. Then I don't know. Hope someone else can help you
Anyway, if somehow you could unlock the bootloader now, as far as I know, you will lose your data when doing it
any development in the above event i am in the same stage