It have tried endless times trying to get root access via magisk by patching my retail Canada boot.img file. My phone has an unlocked bootloader and I definitely have the right boot image as I tried another boot image from another firmware and got a startup failure which I fixed by flashing the retail Canada boot.img. It patches okay and flashes okay (except for message "image signed with key bad key") but no root access and no installed Magisk. If anyone has a solution, has gained root access some other way or knows for a fact that magisk does not work with this model phone I would be very interested to know. This is the firmware I used the boot file from : XT1952-4_CHANNEL_RETCA_9.0_PPY29.105-57
Thanks
Bad Key is normal after you unlock the boot loader. Have you tried side loading the Magisk apk along with a copy of the boot.img and have the app mod the boot.img? Then move the modded boot image back to your pc and fastboot it on to the phone. That's what I did with my G7Power.
Side loading
Not sure what side loading is but I did patch the boot file with Magisk manager, put it on my PC and fastbooted it to my phone with no results. The ROM for the G7 Play is different than older androids. I tried to create a makeshift recovery for it but my ROM does not have a recovery.img or other older android ROM files for that matter. I will have to wait for some kind of workaround for magisk or someone takes on the challenge to create a recovery for the different file system. I installed a recovery for my Moto G4 plus and rooted no problem. I should have researched more before I purchased the G7 Play and unlocked the bootloader so now I am at the mercy of development.
Thanks for your reply.
Nothing
I tried rooting the phone with the Magisk... Nothing.
I tried to relock the bootloader... Nothing.
What works on the other Moto G7s does not work on our G7 Play.
Hello,
relocking Moto G7 play:
* first reflash the 'boot.img' from the correct firmware file - 'fastboot flash boot boot.img' (in the Internet there are official images to the smartphone)
* then you can lock the bootloader again with 'fastboot oem lock'.
"bad key" is gone, SafetyNet test passed and OTA is working again.
Best regards
realsine said:
Hello,
relocking Moto G7 play:
* first reflash the 'boot.img' from the correct firmware file - 'fastboot flash boot boot.img' (in the Internet there are official images to the smartphone)
* then you can lock the bootloader again with 'fastboot oem lock'.
"bad key" is gone, SafetyNet test passed and OTA is working again.
Best regards
Click to expand...
Click to collapse
Do you have a g7 play and did that? So show us because I could not.
When you use this command an error occurs because the "oem unlocking" option is not checked. And it is not checked because the system disables this option after we unlock the bootloader.
So, unless there is another way to check this option, it's not possible to relock the bootloader. That's what I think.
Marcondes BR said:
Do you have a g7 play and did that? So show us because I could not.
When you use this command an error occurs because the "oem unlocking" option is not checked. And it is not checked because the system disables this option after we unlock the bootloader.
So, unless there is another way to check this option, it's not possible to relock the bootloader. That's what I think.
Click to expand...
Click to collapse
Yes, I have a Motorola Moto g7 play.
When I open the bootloader, I can't close it immediately. I get a "bad key" (or something like that). I have to flash the matching original boot.img first.
So in the bootloader:
* fastboot flash boot boot.img
And if that was successful, then afterwards (without restart)
* fastboot oem lock
Possibly the last command must be entered a second time, but this will be output when
If the command works, then the smartphone boots automatically at this point and the bootloader is closed again.
I assume that you have the correct boot.img and must flash.
I have performed this procedure several times successfully.
Information: at every LOCK and at every UNLOCK the data is reset (Factory reset?).
relock bootloader confirm
I can confirm this does work. I just relocked and unlocked my bootloader with those instructions. Again if anybody has successfully rooted this phone I would love to know.
Any update on this ? I would love to buy this phone but not till I know for sure that it can be rooted.. Any insight into this would be greatly appreciated !!
thetesterman said:
Any update on this ? I would love to buy this phone but not till I know for sure that it can be rooted.. Any insight into this would be greatly appreciated !!
Click to expand...
Click to collapse
This device is definitely rootable -- there is no doubt as to proof of concept. It's just a matter of a viable root method being ironed out. The developer of Magisk (topjohnwu) has stated that the current difficulty with installing systemless root on the Moto G7 Play (via patched boot image) is due to the particular A/B partition index of the device. He is actually working on a universal resolution now. It also appears that TWRP custom recovery is being compiled by the guys over at TeamWin, not to mention unofficial builds being compiled by other dedicated devs (which will likely come first). I went ahead and bought a G7 Play and am just patiently waiting for the imminent resolution for root, TWRP, and hopefully, full-on ROM development. In other words, it's not a matter of if; it's just a matter of when.
I expect the devs to release an unofficial version of twrp soon for g7 play. I already tried the same thing with patching my boot img and flashing in fastboot but still no dice. Just bought the the phone so I hope it gets released soon so we can finally root!
avf90m said:
I expect the devs to release an unofficial version of twrp soon for g7 play. I already tried the same thing with patching my boot img and flashing in fastboot but still no dice. Just bought the the phone so I hope it gets released soon so we can finally root!
Click to expand...
Click to collapse
Amen to that.
Root is all that this phone needs. It's amazing. I'm so happy with it. I can't believe what you get for the price. Why would you buy anything else?
If someone can confirm the current root method for the g6 play could work with the g7 play id happily make a guide for y'all at least. If assuming this device also auto encrypts. Try just booting twrp first, press cancel, swipe right to allow system modifications, go to wipe, push the format button next to the advanced wipe button, type yes, go back into bootloader and flash twrp and internal storage should be readable from there adb push the encryption disabler then magisk. And just in case someone here trys to use the twrp for the g6 play I'm feeling you now it won't work in case that needs to be said. Try using magisk beta also if stable doesn't work I noticed we had to use beta for a little bit before we could use stable
LexusBrian400 said:
Root is all that this phone needs. It's amazing. I'm so happy with it. I can't believe what you get for the price. Why would you buy anything else?
Click to expand...
Click to collapse
Couldn't agree more, fantastic phone ( wish it had wireless charging though ) and all I need is root.
ninjakira said:
If someone can confirm the current root method for the g6 play could work with the g7 play id happily make a guide for y'all at least. If assuming this device also auto encrypts. Try just booting twrp first, press cancel, swipe right to allow system modifications, go to wipe, push the format button next to the advanced wipe button, type yes, go back into bootloader and flash twrp and internal storage should be readable from there adb push the encryption disabler then magisk. And just in case someone here trys to use the twrp for the g6 play I'm feeling you now it won't work in case that needs to be said. Try using magisk beta also if stable doesn't work I noticed we had to use beta for a little bit before we could use stable
Click to expand...
Click to collapse
The G6 Play root method will not work on the G7 Play. The G7 Play uses the A/B partition index. There are currently a few developers ironing out a viable root method and also working on a stable TWRP build. Many Moto G7 Play owners have hard bricked their devices by trying root strategies intended for devices with standard GPT partition tables.
I only recently bought my G7 Play and I am curious as to whether my firmware version is all the way up to date. I have the Boost Mobile variant (xt1952-4) and I'm on the PCY29.105-59 firmware build with a March 1, 2019 security patch level. According to my System Update check in Settings, this is the current build. However, it would seem that with a device so recently manufactured, there would be a more current firmware version available. Are there any Sprint, Virgin, or Boost variant owners who can clarify this? And I apologize if this is off topic.
Viva La Android said:
I only recently bought my G7 Play and I am curious as to whether my firmware version is all the way up to date. I have the Boost Mobile variant (xt1952-4) and I'm on the PCY29.105-59 firmware build with a March 1, 2019 security patch level. According to my System Update check in Settings, this is the current build. However, it would seem that with a device so recently manufactured, there would be a more current firmware version available. Are there any Sprint, Virgin, or Boost variant owners who can clarify this? And I apologize if this is off topic.
Click to expand...
Click to collapse
I'm on OPENMX channel and there is currently a June 1st update waiting to be installed. I'm reluctant to install it because I don't know if it will interfere with the root process down the line.
GatoDeNieve said:
I'm on OPENMX channel and there is currently a June 1st update waiting to be installed. I'm reluctant to install it because I don't know if it will interfere with the root process down the line.
Click to expand...
Click to collapse
Ok thanks for the info. I would guess an OTA update for my variant is imminent within the next couple of weeks at least.
Motorola is not in the practice of patching root exploits via OTA updates. The company actually supports both OEM Unlocking and Android development. I don't think you would have any future issues with root by installing your pending OTA. But at the same time I don't blame you for holding off. When in doubt, don't update. Again, I do thank you for the info.
The xt1952-4 (Sprint, Boost, Virgin) variant is rolling out with PCY29.105-134 with June 1 security patches. I just got notification about ten minutes ago.
Related
Dear all
There are so many people looking for exactly samething that iam looking for but unfortunately there is not any proper tutorial available.
Could you confirm if there is anyway to install any other ROM on chinese moto z play ? i don't mind if i have to install each OTA manually.
If so could you please guide step by step guide how to perform this?
If there so no any ROM that can work with chinese variant is there any custom ROM that would and support Moto Mods?
You can read my thread: https://forum.xda-developers.com/moto-z-play/help/problem-reteu-firmwares-chinese-t3619235
Briefly:
1) If you unlock your bootloader you will be able to flash full image of any firmware throug fastboot (with ordinary instruction)
2) OTA at the moment can't be installed even manually due to different device name (addison_retcn vs addison)
I'm looking through different ways to fix device name with no luck at the moment (but I am sure it is possible)
freeman_g said:
You can read my thread: https://forum.xda-developers.com/moto-z-play/help/problem-reteu-firmwares-chinese-t3619235
Briefly:
1) If you unlock your bootloader you will be able to flash full image of any firmware throug fastboot (with ordinary instruction)
2) OTA at the moment can't be installed even manually due to different device name (addison_retcn vs addison)
I'm looking through different ways to fix device name with no luck at the moment (but I am sure it is possible)
Click to expand...
Click to collapse
Did you try editing build.prop?
jameelmemon said:
Did you try editing build.prop?
Click to expand...
Click to collapse
I see that you has not even tried to look through my thread (link was provided in previous post). Suggest to do that (espesially the very end) before further questions / discussion
I have gone through almost all threads including your befiore posting or asking you that question
you are referring to
2) target script is probably /device/company_name/device_name/init.device_name.usb.rc
3) there is a string in that script: write /sys/class/android_usb/android0/iProduct ${ro.product.model}
aactualy {ro.product.model} is variable in build.prop so that script (/device/company_name/device_name/init.device_name.usb.rc) from build.prop
Actually, not there. I have pushed build.prop with adb and has not found any signs of "addison_retcn" there
Hovewer AIDA64 (as well as adb once you try to sideload OTA) will display "addison_retcn" so it is somewhere else
I do not thing that script take the name from build.prop as, for example, it also obtains serial number with the same way and it is the first recommendation on recovering serial (in case it is lost during the some flashing procedure) to manually set it in that script
Finally i manage to install 7.1.1
My phone is addison after installing RETAIL version (7.0)
I installed RETAIL version then downloaded ota then installed 7.1.1 OTA from this thread https://forum.xda-developers.com/moto-z-play/how-to/official-android-7-1-1-download-how-to-t3616352
phone should not be locked/encrypted or protected at least i bricked it and it was not booting up.
Now need to change two things those are in bootloader (SKU and ro.carrier) fastboot getvar all
So just install retail version and sideload OTA through ADB?
I see that my phone is encrypted, shall I decrypt it first?
In any case any news on how you managed to boot 7.1.1 are appreciated
Just found ro.carrier comes from kernel and will be taken from kernel each time devices boots up. so we need someone to customize the kernel and add retru or retus to kernel as ro.carrier.
sku i can not change as i am getting error of command is not allowed
can anyone help regarding this?
So what is the result? You have managed to sideload 7.1.1 аnd it is not booting?
Or everything works fine and you tried to change SKU/channel for further updates?
freeman_g said:
Actually, not there. I have pushed build.prop with adb and has not found any signs of "addison_retcn" there
Hovewer AIDA64 (as well as adb once you try to sideload OTA) will display "addison_retcn" so it is somewhere else
I do not thing that script take the name from build.prop as, for example, it also obtains serial number with the same way and it is the first recommendation on recovering serial (in case it is lost during the some flashing procedure) to manually set it in that script
Click to expand...
Click to collapse
freeman_g said:
So just install retail version and sideload OTA through ADB?
I see that my phone is encrypted, shall I decrypt it first?
In any case any news on how you managed to boot 7.1.1 are appreciated
Click to expand...
Click to collapse
Just install fresh retail version then sideload first ota via adb then boot your phone do not complete setup.
then install 7.1.1 then do factory restore then you are good to go
and it have so many great features you can view them here specially camera app
freeman_g said:
So what is the result? You have managed to sideload 7.1.1 аnd it is not booting?
Or everything works fine and you tried to change SKU/channel for further updates?
Click to expand...
Click to collapse
Initally it didn't work and stuck on bootloader unlock warning but later it worked perfect and iam using 7.1.1 and now trying to figure out how we can change sku and channel to get official OTA.
Sku (XT1635-03) is in bootloader but i can't write is with Fastboot, channel (retcn) is in kernel.
Lucky you I still have the same problem
Yesterday I tried to start with flashing stock retail 7.0 (the link you have provided earlier) but due to fact I had already flashed image with April security patch I didn't manage to downgrade bootloader and gpt (security downgrade issue)
Despite this fact phone boots but small OTA with April security patch did not agree to flash for the same reason: wrong name "addison_retcn"
So I believe the problem is in bootliader and I will probably manage to fix it only with full 7.1.1 retail image.
Glad to see you guys are making some progress. I'll try flashing the retail version on my Chinese Z Play. I'm currently on Epsilon rom (stock rooted 7.0) with January patch. Can I flash retail and then the ota?
I woulf suggest the following:
1) At your current firmware install Aida64 and check if you have addison or addison_cn product name in System section. If you see only addison - then you may install retail firmware and OTAs
2) If you still have addison_cn here then try to install retail firmware provided above (bootloader can be upgraded) and then check product name in Aida64 again. If it changed to addison - you can sideload OTAs. If still addison_cn - then you can't
Thanks @freeman_g
Here is a screenshot of AIDA64 on my device: https://imgur.com/gallery/Or2JF
I guess I should be good to go, right?
Yes, should work
What I can't understand why I still with addison_retcn. Probably, will have to wait for full 7.1.1 retail image
Sorry for the noobie question, but how did you guys with XT1635-03 flash the XT1635-02 firmware? Did you use this script? Did you flash the full rom, including partition, fsg, and modem, no restrictions? I bought my device at Banggood. I know it will come with a shop rom and I would like to install the stock firmware. I want to be prepared when it arrives. Don't want to take the risk of brick it and would like to leave the custom roms for later.
Ok, I have finally found why some people (and myself) have problems with 7.1.1 OTA on xt1635-03
As I mentioned before, OTA just refuses to install mentioning wrong device name (addison_retcn vs addison)
The problem is standard instuction for flashing any firmware with fastboot missing these lines:
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
After flashing these files I saw correct "addison" name in Aida64 and managed to install 7.1.1 OTA on my XT1635-03
People who use RSD Lite did not have such problem as this program use xml file contained both commands (oem and dsp)
It is better to have unlocked bootloader as at first attempt OTA was flashed with some mistake and the phone did not boot. After restoring full image (7.0) with fastboot I managed to sucessfully sideload OTA and now have 7.1.1 on my Chineese device.
Hope this helps
freeman_g said:
Ok, I have finally found why some people (and myself) have problems with 7.1.1 OTA on xt1635-03
As I mentioned before, OTA just refuses to install mentioning wrong device name (addison_retcn vs addison)
The problem is standard instuction for flashing any firmware with fastboot missing these lines:
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
After flashing these files I saw correct "addison" name in Aida64 and managed to install 7.1.1 OTA on my XT1635-03
People who use RSD Lite did not have such problem as this program use xml file contained both commands (oem and dsp)
It is better to have unlocked bootloader as at first attempt OTA was flashed with some mistake and the phone did not boot. After restoring full image (7.0) with fastboot I managed to sucessfully sideload OTA and now have 7.1.1 on my Chineese device.
Hope this helps
Click to expand...
Click to collapse
Awesome, many thanks for sharing. Does this mean you'll receive future OTAs?
Hi, recently I bought my Moto Z2 Play (XT1710-09).
I really wanted to root my phone, but because of some weird bug, it soft-bricked it. Fortunately I had Absolute backup of whole internal storage so I have Original files.
Also I have not flashed TWRP, I have only fastbooted TWRP (Which is propably why I soft-bricked my phone)
So my question is very easy. Is it possible to lock bootloader if I have recovered back whole system and all it's files by stock files with which it (Moto Z2 Play XT1710-09) arrived?
Also the phone is fully functioning at the moment, with original files mantionet above, but it can't make working OTA updating process. And it's pain in ass, because the update manager is still apearing with new update...
So I have decided to lock bootloader even if it means to wipe all personal data and factory reset. Just for sake of getting rid of that stupid OTA updatete fullscreen pop up, that I have a new update waiting to be downloaded and installed.
You may ask as well "Why do you want to lock bootloadert insted of buying Titanium backup pro and freezing that update manager". The reason is simple. I'm afraid of rooting my phone again, because last time, it soft-bricked it and next time, it may full-brick it.
I've relocked my bootloader twice, once on Nougat and once after upgrading to Oreo:
https://forum.xda-developers.com/z2-play/how-to/close-bootloader-lineageos-losing-imei-t3769479
Surely there is a fastboot command somewhere (which I think I saw in another thread) without having to flash some firmware?
https://forum.xda-developers.com/showpost.php?p=77270030&postcount=9
So that does mean. As long as I have 100% of stock files with which it come to me, it will lock?
julesism said:
I've relocked my bootloader twice, once on Nougat and once after upgrading to Oreo:
https://forum.xda-developers.com/z2-play/how-to/close-bootloader-lineageos-losing-imei-t3769479
Click to expand...
Click to collapse
Every firmware I try fails to lock my bootloader, validation fails because non of them are above the security level of my device before I unlocked. Is there any newer firmwares ?
Safe STOCK Oreo by Fastboot FULL flash:
download file from my gdrive: https://drive.google.com/open?id=1XWoaudSHAhQMWi3Au4wmtf2QaCrhugoD
Now to what matters...
Important!!! Only for RETAIL versions AMERICAS with working band base ending in ¨R¨, also for people who DID NOT mess up with persist and EFS...otherwise it is likely to loose IMEI...also....working for previous BRICKED devices that need to use Moto Z bootloader, but only RETAIL AMERICAS versions.
Anything else, please read and follow this post here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
download and unzip file.
extract ROM folder and copy within very same folder the adb fastboot oreo g5+ folder and content extracted in same folder all together.
before going on, make sure you have motorola latest drivers installed, found in ADDONS, adbz folder, motorola device manager.
restart phone in bootloader, connect to laptop.
run file with name OREO G5 PLUS DE CERO.bat (spanish whatever), once done, unplug and restart phone.
should delay a few moments and go into setup.
additionally, you may want to install latest TWRP 3231 found in RECOVERIEZ folder.
additionally, you may want to flash motorola boot logo found in BOOT LOGOZ folder, to prevent the unlocked phone boring screen.
additionally, you may want to flash Magisk 17.1 in ROOTZ folder, only Magisk file, nothing else.
additionally, you may want to flash Kernels like Extended or EX found in KERNELZ folder.
some apps in APPZ folder that I use.
in REVIVALZ you may find files to bring bricked phone to life, but that is another history you may need to find out by reading posts.
in ADBz you can find extra folders for CMD commands.
This tuto is for knowledgeable people.
I have my device working fine in official stock again, however........BOOTLOADER STAYS FOR MOTOZ, meaning, you cannot take OTAS, reason for which locking Bootloader is unnecesary, recommended that once TWRP3231 is flashed, you may backup averything, all partitions, remember this is the last backup for official STOCK we will have from Motonovo.
For further updated official releases, just flash as regular in adb-cmd.
Ciao Babies!!!
Iam uploading my special Bricked moto Z Loader Stock Oreo TWRP Moto G5+ for those who may need it, ciao!!!
Thank you very much, I just followed your method, very fast and clean, thank you I got Oreo on my phone!
SowilM said:
Thank you very much, I just followed your method, very fast and clean, thank you I got Oreo on my phone!
Click to expand...
Click to collapse
Happy to help brother!
So this will work for european users who did not break their persist?
Fabiuz99 said:
So this will work for european users who did not break their persist?
Click to expand...
Click to collapse
As far as i Know only for retail americas but you can try on your own and let us know
Battery performance is for fully happy and satisfied OVERWHELMING
will it work for indian version
will it work for indian version
---------- Post added at 06:48 PM ---------- Previous post was at 06:00 PM ----------
prnv1312 said:
will it work for indian version
Click to expand...
Click to collapse
thnks alot man
can i update my moto g5 plus build number NPNS25.137-93-14 rooted with this?
LLegion said:
Safe STOCK Oreo by Fastboot FULL flash:
download file from my gdrive: https://drive.google.com/open?id=1XWoaudSHAhQMWi3Au4wmtf2QaCrhugoD
Now to what matters...
Important!!! Only for RETAIL versions AMERICAS with working band base ending in ¨R¨, also for people who DID NOT mess up with persist and EFS...otherwise it is likely to loose IMEI...also....working for previous BRICKED devices that need to use Moto Z bootloader, but only RETAIL AMERICAS versions.
Anything else, please read and follow this post here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
download and unzip file.
extract ROM folder and copy within very same folder the adb fastboot oreo g5+ folder and content extracted in same folder all together.
before going on, make sure you have motorola latest drivers installed, found in ADDONS, adbz folder, motorola device manager.
restart phone in bootloader, connect to laptop.
run file with name OREO G5 PLUS DE CERO.bat (spanish whatever), once done, unplug and restart phone.
should delay a few moments and go into setup.
additionally, you may want to install latest TWRP 3231 found in RECOVERIEZ folder.
additionally, you may want to flash motorola boot logo found in BOOT LOGOZ folder, to prevent the unlocked phone boring screen.
additionally, you may want to flash Magisk 17.1 in ROOTZ folder, only Magisk file, nothing else.
additionally, you may want to flash Kernels like Extended or EX found in KERNELZ folder.
some apps in APPZ folder that I use.
in REVIVALZ you may find files to bring bricked phone to life, but that is another history you may need to find out by reading posts.
in ADBz you can find extra folders for CMD commands.
This tuto is for knowledgeable people.
I have my device working fine in official stock again, however........BOOTLOADER STAYS FOR MOTOZ, meaning, you cannot take OTAS, reason for which locking Bootloader is unnecesary, recommended that once TWRP3231 is flashed, you may backup averything, all partitions, remember this is the last backup for official STOCK we will have from Motonovo.
For further updated official releases, just flash as regular in adb-cmd.
Ciao Babies!!!
Click to expand...
Click to collapse
can i update my moto g5 plus build number NPNS25.137-93-14 rooted with this? june security update
LLegion said:
Safe STOCK Oreo by Fastboot FULL flash:
download file from my gdrive: https://drive.google.com/open?id=1XWoaudSHAhQMWi3Au4wmtf2QaCrhugoD
Now to what matters...
Important!!! Only for RETAIL versions AMERICAS with working band base ending in ¨R¨, also for people who DID NOT mess up with persist and EFS...otherwise it is likely to loose IMEI...also....working for previous BRICKED devices that need to use Moto Z bootloader, but only RETAIL AMERICAS versions.
Anything else, please read and follow this post here: https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-fastboot-flash-stock-oreo-t3848433
download and unzip file.
extract ROM folder and copy within very same folder the adb fastboot oreo g5+ folder and content extracted in same folder all together.
before going on, make sure you have motorola latest drivers installed, found in ADDONS, adbz folder, motorola device manager.
restart phone in bootloader, connect to laptop.
run file with name OREO G5 PLUS DE CERO.bat (spanish whatever), once done, unplug and restart phone.
should delay a few moments and go into setup.
additionally, you may want to install latest TWRP 3231 found in RECOVERIEZ folder.
additionally, you may want to flash motorola boot logo found in BOOT LOGOZ folder, to prevent the unlocked phone boring screen.
additionally, you may want to flash Magisk 17.1 in ROOTZ folder, only Magisk file, nothing else.
additionally, you may want to flash Kernels like Extended or EX found in KERNELZ folder.
some apps in APPZ folder that I use.
in REVIVALZ you may find files to bring bricked phone to life, but that is another history you may need to find out by reading posts.
in ADBz you can find extra folders for CMD commands.
This tuto is for knowledgeable people.
I have my device working fine in official stock again, however........BOOTLOADER STAYS FOR MOTOZ, meaning, you cannot take OTAS, reason for which locking Bootloader is unnecesary, recommended that once TWRP3231 is flashed, you may backup averything, all partitions, remember this is the last backup for official STOCK we will have from Motonovo.
For further updated official releases, just flash as regular in adb-cmd.
Ciao Babies!!!
Click to expand...
Click to collapse
will it work on a latin american one? xt1680 currently on npn25.137-92 november patch unlocked bootloader. This is not my daily driver. If the flash of this oreo rom doesnt work, can i just reflash my npn25.137-92 firmware back? or will that not work?
carloandreaguilar said:
will it work on a latin american one? xt1680 currently on npn25.137-92 november patch unlocked bootloader. This is not my daily driver. If the flash of this oreo rom doesnt work, can i just reflash my npn25.137-92 firmware back? or will that not work?
Click to expand...
Click to collapse
I am friom mexico and my phone is working perfect...is your question anserred alwearu...can not go back to nouhat
will it work for indian version XT1686
LLegion said:
Safe STOCK Oreo by Fastboot FULL flash:
I have my device working fine in official stock again, however........BOOTLOADER STAYS FOR MOTOZ, meaning, you cannot take OTAS, reason for which locking Bootloader is unnecesary, recommended that once TWRP3231 is flashed, you may backup averything, all partitions, remember this is the last backup for official STOCK we will have from Motonovo.
Click to expand...
Click to collapse
Can you please clarify the above info. I have a U.S. x1687 that is still stock nougat that I'd like to upgrade to Oreo (since Motonovo screwed everyone with the August security update and lots of us are experiencing major battery drain issues!) . I'd like to remain completely stock if at all possible. Any way to update with the Moto G5+ bootloader?
carloandreaguilar said:
will it work on a latin american one? xt1680 currently on npn25.137-92 november patch unlocked bootloader. This is not my daily driver. If the flash of this oreo rom doesnt work, can i just reflash my npn25.137-92 firmware back? or will that not work?
Click to expand...
Click to collapse
nvrpayretail said:
Can you please clarify the above info. I have a U.S. x1687 that is still stock nougat that I'd like to upgrade to Oreo (since Motonovo screwed everyone with the August security update and lots of us are experiencing major battery drain issues!) . I'd like to remain completely stock if at all possible. Any way to update with the Moto G5+ bootloader?
Click to expand...
Click to collapse
You need bootloader open and yess you can flash safely it ks stock and battery is workimg awesome
LLegion said:
You need bootloader open and yess you can flash safely it ks stock and battery is workimg awesome
Click to expand...
Click to collapse
Sorry, I still a bit confused. The text I quoted says "bootloader stays MotoZ". If I install this update, as is, will my bootloader be MotoZ or remain Moto G5+?
Thanks...
I have the US version (retus), bootloader unlocked, nougat 7.0 with August patch (NPNS25. 137-93-18). Can I use this method safely? Thanks
I do not know what else to say...just flash as edpalined if phone breaks then unbrick it reading other tutos sorry pals but seems you are not reading enough
No risk no Win buddies
Hi, great write up! I like how your zip is a one stop shop. I used the included Moto G5+ toolkit to flash the stock Oreo zip which worked perfectly. I down graded to stock 7.1 from custom 9.0 however I'm noticing while on official Oreo whenever I reboot the device it will TWRP loop back into recovery and the only way to get back in the system is to go to bootloader and boot to system. Anyone else had this happen and fix it?
XT1867
OC.92 bootloader (unlocked)
TWRP 3.2.3.1
JohnSmith8786 said:
Hi, great write up! I like how your zip is a one stop shop. I used the included Moto G5+ toolkit to flash the stock Oreo zip which worked perfectly. I down graded to stock 7.1 from custom 9.0 however I'm noticing while on official Oreo whenever I reboot the device it will TWRP loop back into recovery and the only way to get back in the system is to go to bootloader and boot to system. Anyone else had this happen and fix it?
XT1867
OC.92 bootloader (unlocked)
TWRP 3.2.3.1
Click to expand...
Click to collapse
Do no flash from twrp but from runnimg the batch file oreo desde cero and it will flash the recobery as well to the oreo stock and thats it.buddie
Hello, I'm quite new. I downgraded from Pie to Oreo with Miflash a couple of years ago cause I had wifi problems. I got V9.6.11.0.ODLMIFF now. I want lock bootloader and keep updating via OTA. Which version should I install? stock version? Or some Pie version? I will lose all data of the phone right ? And where I can get the ROM? The old links I had not working now. Thanks
If you want security updates you have to use Android 10 but it's got some "known issues" you may not like. 11.0.16.0
https://bigota.d.miui.com/V11.0.16.0.QDLMIXM/daisy_global_images_V11.0.16.0.QDLMIXM_20201225.0000.00_10.0_79e5becb5f.tgz
If you just want to go back to Pie, you may as well get the last version. 10.0.20.0
There's a list of stock images here:
[FASTBOOT] [daisy] Xiaomi Mi A2 Lite FASTBOOT Images
Disclaimer I am not responsible for bricked devices or anything like that. YOU are choosing to make these modifications, and if you point your finger at me for messing up your device, I will laugh at you. Here are the current fastboot links for...
forum.xda-developers.com
That page also has install instructions if you aren't familiar.
Thanks @a1291762 Yes I prefer something stable so I'll install 10.0.20.0. I enter into fastboot mode and flash with miflash(clean all) right?
And I'm wondering if It is possible to lock the bootloader to update via OTA in the future? (clean and lock) It is possible with that version or you need to install the first Android 8.1.0 [V9.6.4.0.ODLMIFF] ?
Nidea180 said:
prefer something stable so I'll install 10.0.20.0. I enter into fastboot mode and flash with miflash(clean all) right?
And I'm wondering if It is possible to lock the bootloader to update via OTA in the future? (clean and lock) It is possible with that version or you need to install the first Android 8.1.0 [V9.6.4.0.ODLMIFF] ?
Click to expand...
Click to collapse
I haven't used miflash only the fastboot scripts. But I believe miflash has a lock bootloader option. As long as you are also flashing all of the partitions, it's safe to use. Note that you do not need a locked bootloader to OTA.
You can use that version (10.0.20.0). There is no need to use an older one.
If you are downgrading you need to flash a newer modem because it fails if you downgrade the modem firmware. That makes it trickier to flash and lock. Replacing the file works with the fastboot scripts.
After install, you will need to immediately enable developer mode to disable automatic system updates. Otherwise your phone will install Android 10 automatically.
Thanks it has been helpful. So can I update via OTA after install a fastboot ROM, no matter if bootloader is lock or unlock? Is that possible when you downgrade?
Nidea180 said:
Thanks it has been helpful. So can I update via OTA after install a fastboot ROM, no matter if bootloader is lock or unlock? Is that possible when you downgrade?
Click to expand...
Click to collapse
Yes. OTA only requires the A/B partitions to be unmodified. You can have an unlocked bootloader.
If you root with Magisk or install TWRP then your partitions will be modified. If you don't do that, you can OTA without issue.
Nidea180 said:
Thanks @a1291762I'll install 10.0.20.0
Click to expand...
Click to collapse
FWIW: I am lending my phone to somebody else, and didn't want them to have to put up with Android 10's quirks (particularly the need to reboot regularly) so I put the phone into fastboot mode and used flash_all_lock_crc.sh from the Android 9 (10.0.20.0) fastboot image. https://bigota.d.miui.com/V10.0.20....0.PDLMIXM_20200327.0000.00_9.0_2baf524aaf.tgz
Since I didn't have an Android 11 ROM handy, I left the 10.0.20.0 modem image in there, but it seems to be fine (for my single SIM in slot 2). I guess the modem thing (needing to flash a newer image) only applies to Android 8?
Before I let the phone on the network, I enabled developer mode and turned off automatic updates. Disabling the notification category Google Play Services -> System Update should prevent any prompts to install system updates.
Kidding...Figured I'd start off the banter on this topic. Excited to get mine and be on the bleeding edge but already anxious about loosing root for a while.
bacon612 said:
Kidding...Figured I'd start off the banter on this topic. Excited to get mine and be on the bleeding edge but already anxious about loosing root for a while.
Click to expand...
Click to collapse
Same! I do like to experience the phone exactly as it is out of the box for a little while first (otherwise how do I know what I want to mod?), but I hope root is available pretty quickly. It usually is with OnePlus devices, right?
haha, but the sooner the better!! cheers
My best guess is that root will be available upon receipt of the device. Magisk has already updated to patch the Samsung S21 Ultra (SD888) kernel, I'd imagine the kernel on the 9 Pro not to be that much different. TWRP on the other hand is probably no where close. Since the Chinese version of TWRP (LRTeam) stopped making recoveries before Android 11, I think a fully functional TWRP is a ways off. But we'll see... Mauronofrio has made TWRP work for many devices that weren't officially supported. There is also an app made by a kernel developer that can OC/UV the GPU. Haven't been able to use that just yet but hopefully soon!
EDIT: Looks like root is definitely good to go (dev thread with patched boot img for European and Indian versions).
Root should actually be available once u get the device. If there is an update, unlock bootloader first then get full OTA then extract the boot.img out of it and use magisk to patch then u can fastboot flash it.
Bradl79 said:
Root should actually be available once u get the device. If there is an update, unlock bootloader first then get full OTA then extract the boot.img out of it and use magisk to patch then u can fastboot flash it.
Click to expand...
Click to collapse
Yes. I had planned on doing this. Anyone seen a link to the full OTA? I'll extract and patch it for the US unlocked model. Nothing on oneplus.com support page yet
How do I unlock the bootloader?
My plan is to unlock bootloader as soon as I get the device than start using it, once Root / TWRP will become available I'll flash that.
Would it work? Or will I need to format before rooting?
Levi4cyber said:
How do I unlock the bootloader?
My plan is to unlock bootloader as soon as I get the device than start using it, once Root / TWRP will become available I'll flash that.
Would it work? Or will I need to format before rooting?
Click to expand...
Click to collapse
fastboot oem unlock? (to be confirmed)
It will format the data partition (if nothing has changed since my previous oneplus 3T).
Bradl79 said:
Root should actually be available once u get the device. If there is an update, unlock bootloader first then get full OTA then extract the boot.img out of it and use magisk to patch then u can fastboot flash it.
Click to expand...
Click to collapse
Can someone point me to an explanation of how to do this?
getting the full OTA (here on this forum, or on the oneplus website?)
extracting the boot.img (if it's more difficult than extracting it from a zip file?)
patching the boot with magisk (I've only applied magisk through recovery)
fastboot flash boot boot.img (that one I know )
Thanks.
clavelm80 said:
Can someone point me to an explanation of how to do this?
getting the full OTA (here on this forum, or on the oneplus website?)
extracting the boot.img (if it's more difficult than extracting it from a zip file?)
patching the boot with magisk (I've only applied magisk through recovery)
fastboot flash boot boot.img (that one I know )
Thanks.
Click to expand...
Click to collapse
Here is the guide I followed for my OnePlus 7 Pro. I assume it will be about the same.
[MAGISK][Android 10]Patched Boot Image For OnePlus 7 Pro
Hi guy's here's a short and simple guide on how to patch your own boot.img with Magisk. Recommended to patch your own image read this Grab the latest Platform Tools HERE 1. Download a stock Oxygen OS ROM Zip from Here Or the general section of...
forum.xda-developers.com
I usually get the OTA from Oxygen Updater app, but it should also be on the OnePlus website.
There's a python script in the link above that extracts payload.bin in the OTA so that you can get to boot.img.
Install the latest Magisk app on your phone (previously Magisk Manager) and user it to patch boot.img: https://topjohnwu.github.io/Magisk/install.html
terlynn4 said:
Here is the guide I followed for my OnePlus 7 Pro. I assume it will be about the same.
[MAGISK][Android 10]Patched Boot Image For OnePlus 7 Pro
Hi guy's here's a short and simple guide on how to patch your own boot.img with Magisk. Recommended to patch your own image read this Grab the latest Platform Tools HERE 1. Download a stock Oxygen OS ROM Zip from Here Or the general section of...
forum.xda-developers.com
I usually get the OTA from Oxygen Updater app, but it should also be on the OnePlus website.
There's a python script in the link above that extracts payload.bin in the OTA so that you can get to boot.img.
Install the latest Magisk app on your phone (previously Magisk Manager) and user it to patch boot.img: https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
Just need to get that system image so I can extract. Im on AA (international unlocked)
Same, I'm just here waiting for an AA system image. Impatient to get rooted and ensure L1 is working on this display!
Edit: It seems 9 Pro does NOT have hardware attestation which is great for those of us looking to root and keep our L1 certificate.
Can confirm,
fastboot oem unlock
worked to unlock bootloader like on past models. Waiting for that image now so we can actually do something.
Other variants already have root. We on AA (us unlocked) are still waiting for the image
It seems 9 Pro does NOT have hardware attestation which is great for those of us looking to root and keep our L1 certificate.
Nom Prophet said:
Can confirm,
fastboot oem unlock
worked to unlock bootloader like on past models. Waiting for that image now so we can actually do something.
Click to expand...
Click to collapse
Did you have to do anything special to get the fastboot command to work?
I went to developer options and enabled "OEM unlocking" and "USB debugging", then rebooted to fastboot mode and confirmed the device shows up, but when I run "fastboot oem unlock" I get this error:
FAILED (remote: Command not supported in default implementation)
Did I miss something?
terlynn4 said:
Did you have to do anything special to get the fastboot command to work?
I went to developer options and enabled "OEM unlocking" and "USB debugging", then rebooted to fastboot mode and confirmed the device shows up, but when I run "fastboot oem unlock" I get this error:
FAILED (remote: Command not supported in default implementation)
Did I miss something?
Click to expand...
Click to collapse
Make sure you have the latest fastboot and or latest Android developer suite installed
bacon612 said:
Make sure you have the latest fastboot and or latest Android developer suite installed
Click to expand...
Click to collapse
I just grabbed the latest platform-tools and tried again with the same results.
Actually I seem to be in Recovery Mode when I get that error. I started with the device booted and ran "adb reboot fastboot", and it took me to the menu where it shows the 3 languages (Recovery Mode, not Fastboot?). On that screen, "fastboot devices" shows the phone, but "fastboot oem unlock" gives an error.
From there, if I use the menu to boot to Fastboot Mode (where it says Fastboot Mode in red and says device state is locked), then "fastboot devices" doesn't show the phone anymore.
Fixed and unlocked now. I followed the following steps in the top answer here to install a different driver:
Android Fastboot devices not returning device
At the moment I would like to reinstall Android on my device(custom hardware device). I got the image files after building. But when I enter fastboot devices nothing returns. adb devices is worki...
stackoverflow.com
Odd that I didn't have this issue with my old phone since I was just flashing stuff with fastboot a few days ago. Older version or something, I guess.
terlynn4 said:
Fixed and unlocked now. I followed the following steps in the top answer here to install a different driver:
Android Fastboot devices not returning device
At the moment I would like to reinstall Android on my device(custom hardware device). I got the image files after building. But when I enter fastboot devices nothing returns. adb devices is worki...
stackoverflow.com
Odd that I didn't have this issue with my old phone since I was just flashing stuff with fastboot a few days ago. Older version or something, I guess.
Click to expand...
Click to collapse
Always gotta keep things up to date. I remember flashing a Motorola a while back that had me feeling frustrated and flummoxed only to find out that --while I had updated fastboot itself-- I had an out of date mfastboot, or whatever Motorola was using.