Hi!
Is there any Oneplus 7 cases available or just for Oneplus 7 Pro?
On Oneplus Cases & Protection I just find for the Pro version.
Looks like you can get the official Nylon case for about 10€ at Aliexpress.
Linuxkek said:
Looks like you can get the official Nylon case for about 10€ at Aliexpress.
Click to expand...
Click to collapse
You have a link?
Someone post a link in local forum and it was sell out in few min.
Sandstone for about 12€ is still there.
Linuxkek said:
Someone post a link in local forum and it was sell out in few min.
Sandstone for about 12€ is still there.
Click to expand...
Click to collapse
Local forum?
FYI. OnePlus 6T cases fit the OnePlus 7 perfectly. Exact same chassis body on both phones.
equi_design said:
FYI. OnePlus 6T cases fit the OnePlus 7 perfectly. Exact same chassis body on both phones.
Click to expand...
Click to collapse
Except the alert slider is nearer to the power button and smaller, and the rear camera layout is different.. the 7 has a separate flash and the 6T has the flash as part of the camera bump.
Minor but you need to check if your case will accommodate the differences.
fr0d0#2 said:
Except the alert slider is nearer to the power button and smaller, and the rear camera layout is different.. the 7 has a separate flash and the 6T has the flash as part of the camera bump.
Minor but you need to check if your case will accommodate the differences.
Click to expand...
Click to collapse
6T has the exact same camera & flash layout. I'm literally typing this on a 6T with a 7 case from eBay. It has a cutout for my separate flash.
equi_design said:
6T has the exact same camera & flash layout. I'm literally typing this on a 6T with a 7 case from eBay. It has a cutout for my separate flash.
Click to expand...
Click to collapse
Same arrangement yes. On one is in the bump, on the other it isn't ¯\_(ツ)_/¯
Sent from my A0001 using Tapatalk
fr0d0#2 said:
Same arrangement yes. On one is in the bump, on the other it isn't ¯\_(ツ)_/¯
Click to expand...
Click to collapse
Ah yes. The height difference. I guess it doesn't affect me much since I use pretty thin cases. I've got the 6T purple version and refuse to cover it. So I've been there and back again searching for cases that looked nice, helped with grip, showed the back, and had a lanyard loop hole.
That last one I was willing to negotiate on.
Ha Ha.
(I just want it for when I'm shooting photos with lenses attached.)
@paulo_snower Please check the inbox of your private messages. Thank you.
Related
Found some Bumpers for the Moto G from a Chinese seller on Ebay: http://www.ebay.co.uk/itm/331215167...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
They look quite good and there are many colours to choose from for your taste.
Watch the video please
Video:
NextGenGTR said:
Found some Bumpers for the Moto G from a Chinese seller on Ebay: http://www.ebay.co.uk/itm/331215167...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
They look quite good and there are many colours to choose from for your taste.
Click to expand...
Click to collapse
I got one. They're OK,but a bit bulky to be honest. Took 2 weeks to get here. In all honesty, you can get a genuine grip shell for under 8 quid, a much better option. I just bought one yesterday, best thing I've ever put on the phone.
TangerineTractor said:
I got one. They're OK,but a bit bulky to be honest. Took 2 weeks to get here. In all honesty, you can get a genuine grip shell for under 8 quid, a much better option. I just bought one yesterday, best thing I've ever put on the phone.
Click to expand...
Click to collapse
I only bought it yesterday so I haven't used it but based on your description i think i will like it since I do like a bit of extra grip, I think the next time i buy a case it would be the Grip shell, but i am going to wait for either the price to drop or for fake chinese ones to be released since i dont feel like paying £10 for a £95 device Thanks a lot for the description though as i couldnt find any online!
TangerineTractor said:
I got one. They're OK,but a bit bulky to be honest. Took 2 weeks to get here. In all honesty, you can get a genuine grip shell for under 8 quid, a much better option. I just bought one yesterday, best thing I've ever put on the phone.
Click to expand...
Click to collapse
Under 8 quid ? What do you mean ?
sent from my Moto G - Recovery PhilZ Touch - Pink Kernel - C ROM
mattheoh said:
Under 8 quid ? What do you mean ?
sent from my Moto G - Recovery PhilZ Touch - Pink Kernel - C ROM
Click to expand...
Click to collapse
See the other thread on cheap shells I started today http://forum.xda-developers.com/showthread.php?t=2766581
TangerineTractor said:
See the other thread on cheap shells I started today http://forum.xda-developers.com/showthread.php?t=2766581
Click to expand...
Click to collapse
Thanks. Indeed I ve ever read it, but unfortunately, they seem to ship only in UK, and I live un France
sent from my Moto G - Recovery PhilZ Touch - Pink Kernel - C ROM
mattheoh said:
Thanks. Indeed I ve ever read it, but unfortunately, they seem to ship only in UK, and I live un France
sent from my Moto G - Recovery PhilZ Touch - Pink Kernel - C ROM
Click to expand...
Click to collapse
I don't mind getting one and shipping over if you want... it can't cost that much postage!
TangerineTractor said:
I don't mind getting one and shipping over if you want... it can't cost that much postage!
Click to expand...
Click to collapse
Could be cool ! Thanks a lot for the proposal. I ll mp you.
sent from my Moto G - Recovery PhilZ Touch - Pink Kernel - C ROM
Video Coming Soon Guys! I have one thing to say, this case is superb!
Video out! Watch it!!!!
Has anyone else bought this case? What do you think about it? We need more reviews on this brilliant case!
NextGenGTR said:
Has anyone else bought this case? What do you think about it? We need more reviews on this brilliant case!
Click to expand...
Click to collapse
I've bought a yellow one. :good:
i dont like it much, it does not provide much protection, it's not gripy. I'm using a fosmon hyposnap at the moment as an alternative.
digitalmahdi said:
I've bought a yellow one. :good:
i dont like it much, it does not provide much protection, it's not gripy. I'm using a fosmon hyposnap at the moment as an alternative.
Click to expand...
Click to collapse
I think the grip is actually quite fine, the lip that wraps around the device has a nice texture that incresaes grip and also access to the Moto indent allows for the index finger to hold on to the device too and tbh this case is more for looks than protection and it looks great in the colour red! Also, the seperate buttons for the volume rocker makes this case superb! Its only £2 lol
NextGenGTR said:
I think the grip is actually quite fine, the lip that wraps around the device has a nice texture that incresaes grip and also access to the Moto indent allows for the index finger to hold on to the device too and tbh this case is more for looks than protection and it looks great in the colour red! Also, the seperate buttons for the volume rocker makes this case superb! Its only £2 lol
Click to expand...
Click to collapse
i didn't mean it doesn't worth it for 2$ I'm saying when we can get something for 5 bucks it doesn't win the competition. it's definitely a better choice than having no case at all, but i don't find it protective enough for me. it's only beautiful.
digitalmahdi said:
i didn't mean it doesn't worth it for 2$ I'm saying when we can get something for 5 bucks it doesn't win the competition. it's definitely a better choice than having no case at all, but i don't find it protective enough for me. it's only beautiful.
Click to expand...
Click to collapse
Yep, i agree with you, its beautiful and only a little bit protective but since i am at home usually i dont risk breaking my phone
Hi Guys,
I really like the concept of S view or Quick Circle i have seen one or two such cases on the interwebs and wondered, does OPO has the hardware to support such kind of cases?:silly:
The idea behind the s view case is that the amoled screen on Samsung devices save power by using less of the screen since an amoled screen only draws as much power as is on the screen. LG use an LCD panel like the OnePlus and have copied the idea with their circle cut out, for what ever reason I don't know, it doesn't save power. The key requirement is a hall sensor, a magnetic switch that tells the phone when the flip cover is closed. The oneplus does not have a hall sensor.
Sent from my TouchPad using XDA Premium 4 mobile app
I think i saw a video of the opo where the flip case made the screen to turn on. So i guess it has the hall sensor...
The Jack of Clubs said:
The key requirement is a hall sensor, a magnetic switch that tells the phone when the flip cover is closed. The oneplus does not have a hall sensor.
Click to expand...
Click to collapse
any second thoughts(if the video is true)? Also i understand this might/does not save any power but a cool feature to have.
mjjferreira said:
I think i saw a video of the opo where the flip case made the screen to turn on. So i guess it has the hall sensor...
Click to expand...
Click to collapse
I have a feeling you might be talking about this video. https://www.youtube.com/watch?v=5dwRf6pVrM0
This is exactly what you are looking for. Cheap too!
superstargoddess said:
This is exactly what you are looking for. Cheap too!
Click to expand...
Click to collapse
I've read on the Opo forum that cases like the above don't work for international Opo. It seems to be designed for the Color OS rom. I'm holding off from getting the Nillkin Sparkle case because I'm not sure if it would work properly.
adibeckett said:
I've read on the Opo forum that cases like the above don't work for international Opo. It seems to be designed for the Color OS rom. I'm holding off from getting the Nillkin Sparkle case because I'm not sure if it would work properly.
Click to expand...
Click to collapse
Wait so that case (and the Nillkin Sparkle) will work with the Global version sold from the OnePlus one store?
CoCoGirl886 said:
Wait so that case (and the Nillkin Sparkle) will work with the Global version sold from the OnePlus one store?
Click to expand...
Click to collapse
It hasn't been confirmed yet but someone on the Opo did say that the Nillkin Sparkle or the two window case isn't good quality .
vamshi88 said:
any second thoughts(if the video is true)? Also i understand this might/does not save any power but a cool feature to have.
I have a feeling you might be talking about this video. https://www.youtube.com/watch?v=5dwRf6pVrM0
Click to expand...
Click to collapse
If I place a magnet 2/3 down the rhs of the phone's edge, my phone will turn off. I am sure that something can be done with this so that we can all profit from a QuickWindow Case. eg. Nillkin
cparsonscan said:
If I place a magnet 2/3 down the rhs of the phone's edge, my phone will turn off. I am sure that something can be done with this so that we can all profit from a QuickWindow Case. eg. Nillkin
Click to expand...
Click to collapse
Mine behave the same, I think there must be a hal sensor.
I think cm11 has introduced hal sensor drivers because cm11 on my s4mini the sensor works
I love to use very minimalistic cases that don't add much bulk to the phone. Mainly want one for protecting the corners of the phone if it is dropped. My preference is a bumper frame that does not have a back to it. I used to have one from Motorola for my Moto X but I cannot seem to find any for the V20. Anyone had any luck finding any yet?
volfan22 said:
I love to use very minimalistic cases that don't add much bulk to the phone. Mainly want one for protecting the corners of the phone if it is dropped. My preference is a bumper frame that does not have a back to it. I used to have one from Motorola for my Moto X but I cannot seem to find any for the V20. Anyone had any luck finding any yet?
Click to expand...
Click to collapse
I've yet to see anything,however,I just sent EvoLutive Labs (RhinoShield) an e-mail,asking if they'll be offering a bumper case for this phone:
https://rhinoshield.io/pages/crashguard
https://www.youtube.com/watch?v=9DvhljsZY88
They've been relatively quick to respond to past correspondence,should be hearing something within a few days,I'll post the response as soon as I hear something.
KOLIOSIS said:
I've yet to see anything,however,I just sent EvoLutive Labs (RhinoShield) an e-mail,asking if they'll be offering a bumper case for this phone:
https://rhinoshield.io/pages/crashguard
https://www.youtube.com/watch?v=9DvhljsZY88
They've been relatively quick to respond to past correspondence,should be hearing something within a few days,I'll post the response as soon as I hear something.
Click to expand...
Click to collapse
I actually already emailed them and asked them if they would be making one. They said no. Their cases seem like they offer so much protection with almost no case at all. But yes please email them. Hopefully if they see there is demand they will offer one.
volfan22 said:
I actually already emailed them and asked them if they would be making one. They said no. Their cases seem like they offer so much protection with almost no case at all. But yes please email them. Hopefully if they see there is demand they will offer one.
Click to expand...
Click to collapse
That Sux,but,thank you for the news regardless & also for taking the lead in finding a bumper for this phone.
Nillkin made a nice one for several phones a couple years ago,but,it seems they've dropped that item from their line-up on newer phones.
I have zero interest in the POS aluminum ones that litter e-Bay,I'm sure you've seen 'em.
I've tried 'em out (on past phones) & for the most part,they're just downright awful.
Anyhoo,back to the RhinoShield:
I'm gonna hold out a glimmer of hope,as the phone won't be available in their market (Australia,I believe) for another two weeks,perhaps demand will grow & they'll change their minds:
http://www.gizmodo.com.au/2016/10/lg-v20-australian-price-and-release-date/
KOLIOSIS said:
That Sux,but,thank you for the news regardless & also for taking the lead in finding a bumper for this phone.
Nillkin made a nice one for several phones a couple years ago,but,it seems they've dropped that item from their line-up on newer phones.
I have zero interest in the POS aluminum ones that litter e-Bay,I'm sure you've seen 'em.
I've tried 'em out (on past phones) & for the most part,they're just downright awful.
Anyhoo,back to the RhinoShield:
I'm gonna hold out a glimmer of hope,as the phone won't be available in their market (Australia,I believe) for another two weeks,perhaps demand will grow & they'll change their minds:
http://www.gizmodo.com.au/2016/10/lg-v20-australian-price-and-release-date/
Click to expand...
Click to collapse
Yeah I'm still holding out hope! I just think the phone looks great and I hate hiding my phones in cases where you can't even see them. They also tend to add some bulk (depending on what you go with). Hopefully someone will step up to the plate and make one. But yeah I've seen a bunch of those aluminum ones for other phones and yeah they look like junk.
volfan22 said:
Yeah I'm still holding out hope! I just think the phone looks great and I hate hiding my phones in cases where you can't even see them. They also tend to add some bulk (depending on what you go with). Hopefully someone will step up to the plate and make one. But yeah I've seen a bunch of those aluminum ones for other phones and yeah they look like junk.
Click to expand...
Click to collapse
Well, I already have a response from EvolutiveLabs:
Alex @ RhinoShield
Oct 27, 10:36 CST
Hi KOLIOSIS,
Hello,
Thank you for your interest in our product.
Unfortunately, we are not planning to produce RhinoShield products for the LG V20.
Even though we like this device very much, we cannot develop products for everything yet.We will probably not do it in the future, but if we change our mind, the place to get notified is our Facebook Page: https://www.facebook.com/evolutivelabs
We hope you will one day have a phone for which we can provide the best protection there is
Have a great day.
Best regards,
Alex - RhinoShield Customer Service Rep.
Sent from my elsa using XDA Labs
I'm going to inquire with these people, DEVILCASE of Taiwan, tomorrow. I almost bought one for my Note 4.
KOLIOSIS said:
Well, I already have a response from EvolutiveLabs:
Alex @ RhinoShield
Oct 27, 10:36 CST
Hi KOLIOSIS,
Hello,
Thank you for your interest in our product.
Unfortunately, we are not planning to produce RhinoShield products for the LG V20.
Even though we like this device very much, we cannot develop products for everything yet.We will probably not do it in the future, but if we change our mind, the place to get notified is our Facebook Page: https://www.facebook.com/evolutivelabs
We hope you will one day have a phone for which we can provide the best protection there is
Have a great day.
Best regards,
Alex - RhinoShield Customer Service Rep.
Sent from my elsa using XDA Labs
Click to expand...
Click to collapse
Yep pretty much the same response I got. The search continues.
LG makes a bumper for the V10, i'm sure they will have them for the V20.
Anyway I will be in china next week, I ll see what I can pick up, i'm sure aluminum bumper are available, but I prefer more protection.
kms108 said:
LG makes a bumper for the V10, i'm sure they will have them for the V20.
Anyway I will be in china next week, I ll see what I can pick up, i'm sure aluminum bumper are available, but I prefer more protection.
Click to expand...
Click to collapse
Interesting. I wasn't aware they made one for the V10. Sure hope you're right and they produce one. Someone has to step up and produce one I'm sure. With the demise of the Note7, this phone is becoming a lot more popular than people expected I believe and I think someone will hop on board and produce one.
volfan22 said:
Interesting. I wasn't aware they made one for the V10. Sure hope you're right and they produce one. Someone has to step up and produce one I'm sure. With the demise of the Note7, this phone is becoming a lot more popular than people expected I believe and I think someone will hop on board and produce one.
Click to expand...
Click to collapse
I had the OEM LG V10 Bumper, & as with most other current LG devices, OEM accessories weren't readily available to most outside of S. Korea, at least at phone launch time.
Makes no sense to me, why let the 3rd party mfgs get to market before selling your own accessories, SMH, yet, that's been LG's M.O. for as long as I can remember.....
KOLIOSIS said:
I had the OEM LG V10 Bumper, & as with most other current LG devices, OEM accessories weren't readily available to most outside of S. Korea, at least at phone launch time.
Makes no sense to me, why let the 3rd party mfgs get to market before selling your own accessories, SMH, yet, that's been LG's M.O. for as long as I can remember.....
Click to expand...
Click to collapse
But you have to admit, the LG V10 bumper looks nice.:victory:
kms108 said:
But you have to admit, the LG V10 bumper looks nice.:victory:
Click to expand...
Click to collapse
It did look super nice on the phone and left that cool back open, but it did nothing to protect the camera which was soft, painted aluminum. I switched it for a different case. It seems like bumper cases aren't as popular now. When I had my G3, there were about 10 different manufacturers of bumpers. Really, all I want for this phone is something to protect the top and bottom and to keep the screen and camera hump raised off the surface.
kms108 said:
Anyway I will be in china next week, I ll see what I can pick up, i'm sure aluminum bumper are available, but I prefer more protection.
Click to expand...
Click to collapse
cool. pick up a few extras for us all :good:
so does anyone have any updates on this? Would love to get a bumper case for this phone..
Jaws4God said:
so does anyone have any updates on this? Would love to get a bumper case for this phone..
Click to expand...
Click to collapse
BEST case that's slim & works great is the Tech21 have them on all my old devices
https://www.ebay.com/sch/i.html?_fr...ech21+lg+v20.TRS0&_nkw=tech21+lg+v20&_sacat=0
https://youtu.be/4XzVQIqDl7g
I ordered this Nilkin case from Ebay; looks thin, can’t wait to try it.
Enviado desde mi iPad utilizando Tapatalk
astonmartin214 said:
BEST case that's slim & works great is the Tech21 have them on all my old devices
https://www.ebay.com/sch/i.html?_fr...ech21+lg+v20.TRS0&_nkw=tech21+lg+v20&_sacat=0
Click to expand...
Click to collapse
How well does this protect the camera / front of screen.. i've noticed a lot of thin cases will not protect either of those areas.
XxReApErxX said:
https://youtu.be/4XzVQIqDl7g
I ordered this Nilkin case from Ebay; looks thin, can’t wait to try it.
Enviado desde mi iPad utilizando Tapatalk
Click to expand...
Click to collapse
I don't really count those as bumper cases since the top and bottom are exposed. . Thank you though!
Jaws4God said:
How well does this protect the camera / front of screen.. i've noticed a lot of thin cases will not protect either of those areas.
offers great protection I've dropped it multiple times most on the face I never think about the camera
I don't really count those as bumper cases since the top and bottom are exposed. . Thank you though!
Click to expand...
Click to collapse
well I always think about protection & this is the only company I trust
Is this how this thing is supposed to fit!!. Or they sent me one for the regular pixel!?..????
Yep. That's the fit...
Sent from my Google Pixel XL using XDA Labs
X10D3 said:
Yep. That's the fit...
Click to expand...
Click to collapse
Wtf.. oh hell no! There is no edge to edge or a little more jesus
It fits the screen exactly.
Sent from my Google Pixel XL using XDA Labs
Supershieldz is nearly identical. I'm still waiting for my iVoler screen protectors to arrive. Maybe they'll be wider.
@egren58 They've got a new version shipping Nov 7th. It is wider 1~1.5mm than the older one. Contact them through Amazon and let them know it's not satisfied and they will offer a refund or the newer wider version. They're correcting it and looks like they've got good customer support.
X10D3 said:
@egren58 They've got a new version shipping Nov 7th. It is wider 1~1.5mm than the older one. Contact them through Amazon and let them know it's not satisfied and they will offer a refund or the newer wider version. They're correcting it and looks like they've got good customer support.
Click to expand...
Click to collapse
I got a perfect install and it still a hairline short.. from sides. This is not very well measure there is still plenty of room before the glass starts to curve on the phone.
I agree
Sent from my Google Pixel XL using XDA Labs
egren58 said:
I got a perfect install and it still a hairline short.. from sides. This is not very well measure there is still plenty of room before the glass starts to curve on the phone.
Click to expand...
Click to collapse
That one looks much better then the one i got from Verizon ...
razor237 said:
That one looks much better then the one i got from Verizon ...
Click to expand...
Click to collapse
Are you serious.. how can anything be worse than this...
This is already unacceptable to me as it stands.
egren58 said:
Are you serious.. how can anything be worse than this...
This is already unacceptable to me as it stands.
Click to expand...
Click to collapse
Yeah from the picture yours didn't look too bad
razor237 said:
Yeah from the picture yours didn't look too bad
Click to expand...
Click to collapse
I would get a refund if I were you.
razor237 said:
Yeah from the picture yours didn't look too bad
Click to expand...
Click to collapse
Yeah...that's unacceptable. For crying out loud, the Pixel screen is not curved that much, if at all. I'm looking at my Pixel XL right now and I don't see any roundness at all. This screen looks flat to me. But all these screen protector companies are saying"because the Pixels screen is curved, we can't make a wider screen protector." I call shenanigans.
Sent from my Pixel XL using XDA-Developers mobile app
lyall29 said:
Yeah...that's unacceptable. For crying out loud, the Pixel screen is not curved that much, if at all. I'm looking at my Pixel XL right now and I don't see any roundness at all. This screen looks flat to me. But all these screen protector companies are saying"because the Pixels screen is curved, we can't make a wider screen protector." I call shenanigans.
Sent from my Pixel XL using XDA-Developers mobile app
Click to expand...
Click to collapse
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
razor237 said:
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
Click to expand...
Click to collapse
The company YooTech which is probably the same as Pleason, is sending their version 2 protector to me. They said that it is slightly wider. When I get it, I'll try to remember to post pics.
When I remove the protector that I have applied now, I'm going to lay a straight edge across the screen because I can't see any slight curve. This screen looks to be flat as a pancake. [emoji1]
Sent from my Pixel XL using XDA-Developers mobile app
razor237 said:
The screen has a slight beveled at the edge that starts ever so slightly back and for glass screen protectors this is a problem even though it doesn't look like it should be
Click to expand...
Click to collapse
When you do lay it across long ways at the bottom or top so you get 3 of the edges
There is a slight curvature but it's still a good amount of distance from the edge of the display. You can see the curve when you hold the device in an angle and put it in direct light the reflection will show the angle. But there is still space to go wider.
I have a dial indicator at my work. I'll use it to see exactly how much of a curve we are dealing with. Not that it matters, I just want to see.
Sent from my Pixel XL using XDA-Developers mobile app
lyall29 said:
I have a dial indicator at my work. I'll use it to see exactly how much of a curve we are dealing with. Not that it matters, I just want to see.
Click to expand...
Click to collapse
It's very minimal. The o e plus 3 had more and they managed to get some decent tempered covered the display and a bit more
I've had one of these ordered about 3 weeks ago from Pleson through Amazon. Said they shipped it 10/18, but they 'forgot' to provide a tracking number and can't find one now, but are sure it shipped. They were good about offering a refund, though. Of course, the original picture they were marketing it with - showing it with the Pixel XL - also showed the camera & speaker areas as cutouts, not whole sections cut to the edge, which was one reason I ordered theirs vs all the rest that look essentially identical.
I'm waiting on Intelliarmor's PRO glass - it's the only one that went essentially full edge-to-edge (less about 0.5mm) on my Nexus 6, which had similarly rounded edges.
Just curious guys. I want to replace the back housing on my op3 so I can resell it. Do you know if the oneplus 3t housing fits the oneplus 3? Cheers
XDRdaniel said:
Just curious guys. I want to replace the back housing on my op3 so I can resell it. Do you know if the oneplus 3t housing fits the oneplus 3? Cheers
Click to expand...
Click to collapse
Yup, they're identical, just slightly different color.
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Yup, they're identical, just slightly different color.
Click to expand...
Click to collapse
Lovely! Cheers mate, I'll just get the op3t one cause I fancy the colour