So I data reset my phone and then tried to use Odin to flash my phone to the USA version of the firmware (trying to go to verizon today). One thing I've noticed is that Secure Download is Enabled and FRP Lock is Off.. I've got USB debugging on and the software is installed on the PC (I can copy files off of the device and on to the pc). Here's what I get. Any help is appriciated.
Flashing G965USQS4CSC8_G965UOYN4CSC8_USC
Running as Admin using the CSC file.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5341 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ran as admin with the Home CSC file.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> dqmdbg.img.ext4
<ID:0/005> carrier.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 5367 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sigh, looks like a different USB port did it.
Hi, i have same problem with my S9 plus. Odin cannot flash.
I get this error message: only official released binaries are allowed to be flashed(RECOVERY)
What can i do ?
Related
My S3 Neo is a Uzbekistan CAC version & i am currently residing in India is a on earlier 4.4.4 now suddenly it wasn't working so i have to install stock 4.3. GT-I9300IXXUAND1
Now when i downloaded the new os
I9300IXWSBQB1_I9300IOXEBOK1_CAC
I9300IXWUBOF1_I9300IOXEBOF1_CAC
both of these are not flashing it showing
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IXWUBOF1_I9300IOXEBOF1_I9300IXXUBOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Try rooting with kingroot Now when its rooted tried custom recovery by TWRP it stucked in the downloading mode.
Now again trying to flash using
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300IXXUAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300IXXUAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9300IXXUAND1_REV00_CL_1528638.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OJV_I9300IOJVAND1_2566126_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any other way to flash custom ROM or Any other stock rom.
what ever just to run games & internet usage.
earlier my phone get dead so i tried with the help from here so debricked the phone & get it working condition.
Its IMEI is lost both sims not working & back camera is gone as well.
Thanks In Advance.
im trying to flash my gs6 edge plus and i received this error. Help please!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Changing frimware from UAE to India - Resolved
Issue resolved. I first uploaded only the India specific CSC using Odin, then factory reset the phone, then I uploaded only the AP file, again factory reset the phone as soon as it booted, then uploaded the BL & CS file and again factory reset the phone. Now the CSC has been changed to INS.
Bala_R said:
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
roshan_dubey- said:
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
Click to expand...
Click to collapse
Download Samsung latest usb driver on your pc
aarush.chaurasiya said:
Download Samsung latest usb driver on your pc
Click to expand...
Click to collapse
I tried but whenever I connect it via USB my computer says it connot recognize the last plugged in device and after that my phone is just charging I tried installing latest drivers from Samsung but I didn't work what should I do?
Hi, i'm a noob..i wanted to flash LineageOS/Android 11 on my samsung galaxy note 4 n910f so i rooted but was finding difficulties with twrp booting after a successful flash so i tried flashing back stock firmware of the note 4 via odin but failed every time,because of that i couldn't boot into recovery anymore but could boot into odin mode.I tried repairing the recovery so i flashed the boot img of the lineageOS via twrp mobile app which flashed successfully by surprise..now phone bricked with secure fail:Kernel,Start Up Failed,i've used the verizon repair assistant and various repair tools i could find but to no avail. Everything is gone but i can boot into download mode...I've tried Full Firmware N910FXXU1DRI2_N910FOXX1DSB1_6.0.1 with it's pit file to repair via odin too but fail all the time.Please i need help anyone here?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4409 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello, I have a question, can I flash an A70 MN to an A70 FN? Have both devices myself and have changed the display on the A70 FN. Since I could read the imprint on the motherboard. The motherboard is labeled A70FN, A70MN, ... etc. so there should only be differences in the software.
I have read that a modified version of odin is necessary. My question is which version and why?
is it possible to change / flash the baseband on the SM-A705?
The A70MN is not so easy to flash with the FN variant, always get error message in line...It does not matter if it is Odin or the patched Odin variant.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 8223 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2006)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
it does not work with pit-file or with pit-file already included in the CSC file. The option set re-partition or not leads to the same result, but both mainboards are visually identical. Have also tried to install TWRP via Odin. No success
<ID:0/003> Can't open the specified file. (Line: 2006)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!